diff options
| author | Tom Rini <trini@ti.com> | 2012-06-19 12:54:34 +0000 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2012-06-20 20:26:16 +0200 |
| commit | 26750c8aee2383a026e0cf89e9310628d3a5a6a0 (patch) | |
| tree | c9aba64f8650364b2cf284e0df6896000728c396 | |
| parent | 87d65558efe50bb2cc3617bafd8399695212c0e5 (diff) | |
| download | u-boot-26750c8aee2383a026e0cf89e9310628d3a5a6a0.tar.gz u-boot-26750c8aee2383a026e0cf89e9310628d3a5a6a0.tar.xz u-boot-26750c8aee2383a026e0cf89e9310628d3a5a6a0.zip | |
CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there
We provide a default table of { 9600, 19200, 38400, 57600, 115200 }
in <config_fallbacks.h> which mkconfig places after <configs/...h> in
the generated config file. This is used when a board has not set its
own table.
Signed-off-by: Tom Rini <trini@ti.com>
242 files changed, 17 insertions, 405 deletions
diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h index 25cd833865..d870d1224f 100644 --- a/arch/blackfin/include/asm/config.h +++ b/arch/blackfin/include/asm/config.h @@ -162,9 +162,6 @@ # undef CONFIG_SYS_HZ #endif #define CONFIG_SYS_HZ 1000 -#ifndef CONFIG_SYS_BAUDRATE_TABLE -# define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#endif /* Blackfin POST tests */ #ifdef CONFIG_POST_BSPEC1_GPIO_LEDS diff --git a/board/fads/fads.h b/board/fads/fads.h index 3dc535878d..1a3d22a604 100644 --- a/board/fads/fads.h +++ b/board/fads/fads.h @@ -147,8 +147,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h new file mode 100644 index 0000000000..430890c3fb --- /dev/null +++ b/include/config_fallbacks.h @@ -0,0 +1,16 @@ +/* + * Copyright 2012 Texas Instruments + * + * This file is licensed under the terms of the GNU General Public + * License Version 2. This file is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __CONFIG_FALLBACKS_H +#define __CONFIG_FALLBACKS_H + +#ifndef CONFIG_SYS_BAUDRATE_TABLE +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#endif + +#endif /* __CONFIG_FALLBACKS_H */ diff --git a/include/configs/A3000.h b/include/configs/A3000.h index 0c21bd8ecb..b85244a89a 100644 --- a/include/configs/A3000.h +++ b/include/configs/A3000.h @@ -49,7 +49,6 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 9600 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_BOOTDELAY 5 diff --git a/include/configs/AMX860.h b/include/configs/AMX860.h index e7c6f96836..e7a6c80f62 100644 --- a/include/configs/AMX860.h +++ b/include/configs/AMX860.h @@ -121,8 +121,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/Adder.h b/include/configs/Adder.h index 48e6df5c27..ecf5fb873a 100644 --- a/include/configs/Adder.h +++ b/include/configs/Adder.h @@ -101,8 +101,6 @@ #define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /*----------------------------------------------------------------------- * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */ diff --git a/include/configs/BMW.h b/include/configs/BMW.h index e1951ebb6e..633e9bd69f 100644 --- a/include/configs/BMW.h +++ b/include/configs/BMW.h @@ -51,7 +51,6 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 9600 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h index ed3f9e1cbe..b2b9e0761e 100644 --- a/include/configs/CPC45.h +++ b/include/configs/CPC45.h @@ -49,7 +49,6 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 9600 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h index abf4ef4212..7ac182f0f0 100644 --- a/include/configs/CPU86.h +++ b/include/configs/CPU86.h @@ -203,8 +203,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 /* "bad" address */ /* diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h index 723bdf3fd5..aa5ce29585 100644 --- a/include/configs/CPU87.h +++ b/include/configs/CPU87.h @@ -216,8 +216,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 /* "bad" address */ #define CONFIG_LOOPW diff --git a/include/configs/CU824.h b/include/configs/CU824.h index 77414abdac..c8821fd059 100644 --- a/include/configs/CU824.h +++ b/include/configs/CU824.h @@ -49,7 +49,6 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 9600 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h index 346b49cf4e..eb9fe46487 100644 --- a/include/configs/EB+MCF-EV123.h +++ b/include/configs/EB+MCF-EV123.h @@ -40,7 +40,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 9600 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */ diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h index c6a17b039b..da40c18b44 100644 --- a/include/configs/ELPT860.h +++ b/include/configs/ELPT860.h @@ -145,7 +145,6 @@ #define CONFIG_ENV_IS_IN_FLASH 1 /* Environment is in FLASH */ #define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 bps */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_ETHADDR 00:01:77:00:60:40 #define CONFIG_IPADDR 192.168.0.30 diff --git a/include/configs/EP88x.h b/include/configs/EP88x.h index a0acfd2697..1638d356d2 100644 --- a/include/configs/EP88x.h +++ b/include/configs/EP88x.h @@ -96,8 +96,6 @@ #define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /*----------------------------------------------------------------------- * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */ diff --git a/include/configs/ESTEEM192E.h b/include/configs/ESTEEM192E.h index 841bf11cfc..9bac44ebc1 100644 --- a/include/configs/ESTEEM192E.h +++ b/include/configs/ESTEEM192E.h @@ -102,10 +102,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/ETX094.h b/include/configs/ETX094.h index c4270936a6..2703625677 100644 --- a/include/configs/ETX094.h +++ b/include/configs/ETX094.h @@ -122,8 +122,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h index 57336f9fc8..35c0c7eed1 100644 --- a/include/configs/FADS823.h +++ b/include/configs/FADS823.h @@ -154,8 +154,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h index 438d19ecf4..559a83f527 100644 --- a/include/configs/FADS850SAR.h +++ b/include/configs/FADS850SAR.h @@ -100,8 +100,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/FLAGADM.h b/include/configs/FLAGADM.h index 339bb59e79..fa6105de3d 100644 --- a/include/configs/FLAGADM.h +++ b/include/configs/FLAGADM.h @@ -112,8 +112,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h index 38d905ad45..6d7ca27add 100644 --- a/include/configs/FPS850L.h +++ b/include/configs/FPS850L.h @@ -151,8 +151,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h index ca0b1ccd45..b074c7db4d 100644 --- a/include/configs/FPS860L.h +++ b/include/configs/FPS860L.h @@ -151,8 +151,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h index 68a0cfdf7f..1ea4108e7f 100644 --- a/include/configs/GEN860T.h +++ b/include/configs/GEN860T.h @@ -64,16 +64,6 @@ #define CONFIG_BAUDRATE 38400 /* - * Set allowable console baud rates - */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, \ - 19200, \ - 38400, \ - 57600, \ - 115200, \ - } - -/* * Print console information */ #undef CONFIG_SYS_CONSOLE_INFO_QUIET diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h index 8f4e544c64..a62ef6364b 100644 --- a/include/configs/HIDDEN_DRAGON.h +++ b/include/configs/HIDDEN_DRAGON.h @@ -190,7 +190,6 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM } /*----------------------------------------------------------------------- diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h index 27bd146e39..94b05dce41 100644 --- a/include/configs/IAD210.h +++ b/include/configs/IAD210.h @@ -166,8 +166,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h index b011d50efe..81f219c9b5 100644 --- a/include/configs/ICU862.h +++ b/include/configs/ICU862.h @@ -170,8 +170,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index be778fe809..6d0937fb34 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -215,8 +215,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */ /* diff --git a/include/configs/IP860.h b/include/configs/IP860.h index ba8d633750..2379718565 100644 --- a/include/configs/IP860.h +++ b/include/configs/IP860.h @@ -135,8 +135,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h index d9663062b9..6dd98128d4 100644 --- a/include/configs/IPHASE4539.h +++ b/include/configs/IPHASE4539.h @@ -175,8 +175,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_SYS_RESET_ADDRESS 0x04400000 #define CONFIG_MISC_INIT_R 1 /* We need misc_init_r() */ diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h index 922b0798cf..d6474bd5c3 100644 --- a/include/configs/ISPAN.h +++ b/include/configs/ISPAN.h @@ -160,8 +160,6 @@ #define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_SYS_RESET_ADDRESS 0x09900000 #define CONFIG_MISC_INIT_R /* We need misc_init_r() */ diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h index b82795479a..f98a66bf24 100644 --- a/include/configs/IVML24.h +++ b/include/configs/IVML24.h @@ -129,8 +129,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h index 9b0c32ab71..d6e9b2381d 100644 --- a/include/configs/IVMS8.h +++ b/include/configs/IVMS8.h @@ -126,8 +126,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h index 0f4ea418a7..c3855c332c 100644 --- a/include/configs/LANTEC.h +++ b/include/configs/LANTEC.h @@ -139,8 +139,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 6f462be1a6..a1eaeff80e 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -36,7 +36,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index bfbb06c008..d417e2406c 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -41,7 +41,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 7bb6dfefc0..733aece767 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -40,7 +40,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index 104fcdeb8d..9524e10f47 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -42,7 +42,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index b843e07708..30584fe715 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -33,7 +33,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG /* disable watchdog */ diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index dd8a56011f..2feb783b17 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -33,7 +33,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG /* disable watchdog */ diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index 1d3b5c354f..ac200f5777 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -43,7 +43,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG /* disable watchdog */ diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index de15163244..1a03f5dda1 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -41,7 +41,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */ diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index e34dc4049a..9c2a3bbb91 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -46,7 +46,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index 928b044153..706e3d6513 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -41,7 +41,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 216244c9d2..896d0d8536 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -40,7 +40,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 29b9b2a69b..64f83026c4 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -40,7 +40,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index d0044b142d..0d09f0ec61 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -40,7 +40,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 3360 /* timeout in ms, max is 3.36 sec */ diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index e2e2445219..64928e99be 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -41,7 +41,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index d934d8edf4..b623c33318 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -41,7 +41,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index f31972c7b6..3bdb8673c6 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -41,7 +41,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #define CONFIG_HW_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index 813f0cb473..3487e49a1c 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -41,7 +41,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #define CONFIG_HW_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ diff --git a/include/configs/MBX.h b/include/configs/MBX.h index 79780bd1a3..95ddc974e4 100644 --- a/include/configs/MBX.h +++ b/include/configs/MBX.h @@ -119,8 +119,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/MBX860T.h b/include/configs/MBX860T.h index 969ba7e245..8d1ca48233 100644 --- a/include/configs/MBX860T.h +++ b/include/configs/MBX860T.h @@ -74,8 +74,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h index b9c163856b..3ff36ad2a6 100644 --- a/include/configs/MHPC.h +++ b/include/configs/MHPC.h @@ -162,8 +162,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h index f7fba0ca48..1391ce517d 100644 --- a/include/configs/MOUSSE.h +++ b/include/configs/MOUSSE.h @@ -140,8 +140,6 @@ 1MB - 64K FLASH0 SEG =960K (size=0xf0000)*/ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * NS16550 Configuration */ diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h index f304272ff7..84a167d2a7 100644 --- a/include/configs/MUSENKI.h +++ b/include/configs/MUSENKI.h @@ -49,7 +49,6 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 9600 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_BOOTDELAY 5 diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h index 0724752732..52d172925b 100644 --- a/include/configs/MVBLUE.h +++ b/include/configs/MVBLUE.h @@ -66,7 +66,6 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOT_RETRY_TIME -1 diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h index 46151daf96..8350830d75 100644 --- a/include/configs/MVS1.h +++ b/include/configs/MVS1.h @@ -124,8 +124,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h index e36476e30a..31fe893473 100644 --- a/include/configs/NETPHONE.h +++ b/include/configs/NETPHONE.h @@ -155,8 +155,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h index acf5dcbc0e..fd3ab1635f 100644 --- a/include/configs/NETTA.h +++ b/include/configs/NETTA.h @@ -168,8 +168,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h index c58899beea..5ca01a098f 100644 --- a/include/configs/NETTA2.h +++ b/include/configs/NETTA2.h @@ -156,8 +156,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h index 3494b7acdf..61b19abe31 100644 --- a/include/configs/NETVIA.h +++ b/include/configs/NETVIA.h @@ -137,8 +137,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h index 7e3ba2a111..5015b79d4d 100644 --- a/include/configs/NSCU.h +++ b/include/configs/NSCU.h @@ -159,8 +159,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/NX823.h b/include/configs/NX823.h index bb0d3a3022..8b13eb07b6 100644 --- a/include/configs/NX823.h +++ b/include/configs/NX823.h @@ -101,8 +101,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h index 77cedc06d6..7e1c11e572 100644 --- a/include/configs/PCIPPC2.h +++ b/include/configs/PCIPPC2.h @@ -50,7 +50,6 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 9600 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_PREBOOT "" #define CONFIG_BOOTDELAY 5 diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h index a8d20ca920..c3f295b86c 100644 --- a/include/configs/PCIPPC6.h +++ b/include/configs/PCIPPC6.h @@ -50,7 +50,6 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 9600 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_PREBOOT "" #define CONFIG_BOOTDELAY 5 diff --git a/include/configs/PM826.h b/include/configs/PM826.h index cde0fd67ab..fbcf8e5e22 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -200,8 +200,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */ /* diff --git a/include/configs/PM828.h b/include/configs/PM828.h index 74ced5ae22..c37aafdd47 100644 --- a/include/configs/PM828.h +++ b/include/configs/PM828.h @@ -200,8 +200,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */ /* diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h index 60aabf3f27..992443a8e2 100644 --- a/include/configs/PMC405DE.h +++ b/include/configs/PMC405DE.h @@ -117,10 +117,6 @@ #undef CONFIG_SYS_EXT_SERIAL_CLOCK #define CONFIG_SYS_BASE_BAUD 691200 -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ diff --git a/include/configs/PN62.h b/include/configs/PN62.h index dae4577f37..93876b1317 100644 --- a/include/configs/PN62.h +++ b/include/configs/PN62.h @@ -171,7 +171,6 @@ /* * Serial port configuration */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL diff --git a/include/configs/QS823.h b/include/configs/QS823.h index 36efbf2e0d..fa77ffd5eb 100644 --- a/include/configs/QS823.h +++ b/include/configs/QS823.h @@ -255,8 +255,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/QS850.h b/include/configs/QS850.h index 5c6ed07ba6..efa7bd63f2 100644 --- a/include/configs/QS850.h +++ b/include/configs/QS850.h @@ -255,8 +255,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h index b0bee82dff..31563203bd 100644 --- a/include/configs/QS860T.h +++ b/include/configs/QS860T.h @@ -165,8 +165,6 @@ CONFIG_SPI #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h index a8e9a4a31a..9befacbaba 100644 --- a/include/configs/R360MPI.h +++ b/include/configs/R360MPI.h @@ -162,8 +162,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * JFFS2 partitions */ diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 40980fe502..b042c67020 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -151,8 +151,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h index 267ece16c9..b215c2d642 100644 --- a/include/configs/RPXClassic.h +++ b/include/configs/RPXClassic.h @@ -134,8 +134,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h index 74926d8d2a..8ffb014fe8 100644 --- a/include/configs/RPXlite.h +++ b/include/configs/RPXlite.h @@ -103,8 +103,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h index efc59fea6f..f8bcf0fae2 100644 --- a/include/configs/RPXlite_DW.h +++ b/include/configs/RPXlite_DW.h @@ -178,7 +178,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Low Level Configuration Settings diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h index c1865fc636..d4d3d5738d 100644 --- a/include/configs/RPXsuper.h +++ b/include/configs/RPXsuper.h @@ -216,9 +216,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h index 0f8084ef70..671d52168a 100644 --- a/include/configs/RRvision.h +++ b/include/configs/RRvision.h @@ -180,8 +180,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/SCM.h b/include/configs/SCM.h index 73216dc799..87d52babe6 100644 --- a/include/configs/SCM.h +++ b/include/configs/SCM.h @@ -234,8 +234,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC /* "bad" address */ #define CONFIG_MISC_INIT_R /* have misc_init_r() function */ diff --git a/include/configs/SM850.h b/include/configs/SM850.h index 833b18a8fd..e42e2cd89d 100644 --- a/include/configs/SM850.h +++ b/include/configs/SM850.h @@ -109,8 +109,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h index fba5b5e2aa..cffeb11447 100644 --- a/include/configs/SPD823TS.h +++ b/include/configs/SPD823TS.h @@ -121,8 +121,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/SX1.h b/include/configs/SX1.h index 01c2b3d50c..ea09368993 100644 --- a/include/configs/SX1.h +++ b/include/configs/SX1.h @@ -90,8 +90,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * BOOTP options diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index 774c98faec..b7fbe5e153 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -188,8 +188,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h index 35171b6b92..f54fcb33e5 100644 --- a/include/configs/Sandpoint8240.h +++ b/include/configs/Sandpoint8240.h @@ -226,7 +226,6 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* takes up to 10 msec */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM } /*----------------------------------------------------------------------- diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h index 9ba307e1c0..84e4891dc9 100644 --- a/include/configs/Sandpoint8245.h +++ b/include/configs/Sandpoint8245.h @@ -194,7 +194,6 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM } /*----------------------------------------------------------------------- diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h index c93b12ebf1..d95a22611d 100644 --- a/include/configs/TASREG.h +++ b/include/configs/TASREG.h @@ -48,7 +48,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 19200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h index 72c652347f..0c52775516 100644 --- a/include/configs/TK885D.h +++ b/include/configs/TK885D.h @@ -200,8 +200,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Enable loopw command. */ diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index f2a2e33664..b26e4f4c23 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -166,8 +166,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index f6b856c4b9..a9bf525cce 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -161,8 +161,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h index 626cf19bd0..58c9716efb 100644 --- a/include/configs/TQM8260.h +++ b/include/configs/TQM8260.h @@ -268,8 +268,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC /* "bad" address */ /* diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h index 413ce640af..c2618dc0d5 100644 --- a/include/configs/TQM8272.h +++ b/include/configs/TQM8272.h @@ -332,8 +332,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_SYS_RESET_ADDRESS 0x40000104 /* "bad" address */ /* diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index 6114bb0104..d217d3b781 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -151,8 +151,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index 911560ce8d..52e112568c 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -152,8 +152,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index fd90501e36..e36a2bb17d 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -155,8 +155,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 3e3f6de208..473301a10c 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -189,8 +189,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index cdf4885b8c..ed61f0f63e 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -154,8 +154,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index 7ccc614706..4d7effb980 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -155,8 +155,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index 79bea34173..db7c1c31c9 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -158,8 +158,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index 76934590b3..af528fdc01 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -158,8 +158,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index 8636ff4c19..b1cb406cae 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -201,8 +201,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index 5204771e00..c960a54b72 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -198,8 +198,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Enable loopw command. */ diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 76cd394db2..082f3f98ce 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -181,9 +181,6 @@ /* we configure PWM Timer 4 to 1ms 1000Hz */ #define CONFIG_SYS_HZ 1000 -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* support additional compression methods */ #define CONFIG_BZIP2 #define CONFIG_LZO diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h index c06909fccd..0b6453b139 100644 --- a/include/configs/VoVPN-GW.h +++ b/include/configs/VoVPN-GW.h @@ -86,9 +86,6 @@ /* don't allow baudrate change */ #undef CONFIG_SYS_LOADS_BAUD_CHANGE -/* supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * select ethernet configuration * diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h index 1fafbedc9f..a2b347a828 100644 --- a/include/configs/a320evb.h +++ b/include/configs/a320evb.h @@ -71,9 +71,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_CLK 18432000 -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Ethernet */ diff --git a/include/configs/adp-ag101.h b/include/configs/adp-ag101.h index 8421c79bf5..6bf0addcb5 100644 --- a/include/configs/adp-ag101.h +++ b/include/configs/adp-ag101.h @@ -100,9 +100,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_CLK ((46080000 * 20) / 25) /* AG101 */ -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Ethernet */ diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index ffc70a630b..747d061001 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -100,9 +100,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */ -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Ethernet */ diff --git a/include/configs/adp-ag102.h b/include/configs/adp-ag102.h index a4628e4343..35f88cc39d 100644 --- a/include/configs/adp-ag102.h +++ b/include/configs/adp-ag102.h @@ -99,9 +99,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_CLK 33000000 /* AG102 */ -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Ethernet */ diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index 2adf8f9e5c..6715cb4b11 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -157,7 +157,6 @@ "rw rootfstype=jffs2 panic=20" #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CONFIG_SYS_PROMPT "U-Boot> " #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/apollon.h b/include/configs/apollon.h index 8f06cd7086..aebca71ec3 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -112,7 +112,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <config_cmd_default.h> diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index d468e498fa..f89a5676f5 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -147,7 +147,6 @@ */ #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (2) diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index 7e6c1554cb..9f908ce9d5 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -129,7 +129,6 @@ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID 0/* ignored in arm */ -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CONFIG_BAUDRATE 115200 /* diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index db52ee66da..07b1968070 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -73,7 +73,6 @@ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } /* LED */ #define CONFIG_AT91_LED diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 5140b26cda..6fd0b832fe 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -67,7 +67,6 @@ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200, 57600, 38400, 19200, 9600} /* LCD */ #define CONFIG_LCD diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index f424e5a5bd..40308ca919 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -71,7 +71,6 @@ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600} /* LCD */ #define CONFIG_LCD 1 diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 159857d32f..f46b91b002 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -178,7 +178,6 @@ "rw rootfstype=jffs2" #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CONFIG_SYS_PROMPT "U-Boot> " #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 79ea1f29a7..45f8baff05 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -62,7 +62,6 @@ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600} /* LCD */ #define CONFIG_LCD 1 diff --git a/include/configs/atc.h b/include/configs/atc.h index bf1f202801..75f950b94c 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -171,8 +171,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 /* "bad" address */ #define CONFIG_SYS_ALLOC_DPRAM diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h index a5ec224969..1417240b72 100644 --- a/include/configs/balloon3.h +++ b/include/configs/balloon3.h @@ -54,7 +54,6 @@ #define CONFIG_PXA_SERIAL #define CONFIG_STUART 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Bootloader Components Configuration diff --git a/include/configs/c2mon.h b/include/configs/c2mon.h index f325d2b439..01e5e90bc3 100644 --- a/include/configs/c2mon.h +++ b/include/configs/c2mon.h @@ -127,8 +127,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/ca9x4_ct_vxp.h index c5226ab143..14b81460b7 100644 --- a/include/configs/ca9x4_ct_vxp.h +++ b/include/configs/ca9x4_ct_vxp.h @@ -62,7 +62,6 @@ #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 38400 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SYS_SERIAL0 0x10009000 #define CONFIG_SYS_SERIAL1 0x1000A000 diff --git a/include/configs/calimain.h b/include/configs/calimain.h index 6b68f103d2..81c9b9b98f 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -173,7 +173,6 @@ #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_FLASH_CFI_DRIVER diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index 71faf1cc9f..2512a75c9f 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -54,7 +54,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_COM1 0x01c20000 #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h index 81e4de45d6..408e91832b 100644 --- a/include/configs/cm4008.h +++ b/include/configs/cm4008.h @@ -56,8 +56,6 @@ #define CONFIG_SERIAL1 #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * BOOTP options diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h index 785ab0a62a..d85a6001a2 100644 --- a/include/configs/cm41xx.h +++ b/include/configs/cm41xx.h @@ -56,8 +56,6 @@ #define CONFIG_SERIAL1 #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * BOOTP options diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 6d97a0cdc2..c9fdc2cb6b 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -81,7 +81,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 19200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } /* --- * set "#if 0" to "#if 1" if (Hardware)-WATCHDOG should be enabled & change diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 7691fb3155..4a3b01d0c5 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -56,7 +56,6 @@ #define CONFIG_PXA_SERIAL #define CONFIG_FFUART 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Bootloader Components Configuration diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h index 8b6a687989..a877066c4b 100644 --- a/include/configs/cpu9260.h +++ b/include/configs/cpu9260.h @@ -487,7 +487,6 @@ #endif #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #if defined(CONFIG_CPU9G20) #define CONFIG_SYS_PROMPT "CPU9G20=> " diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index 1b43c54f48..dc676dffdb 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -197,7 +197,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x21000000 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } #define CONFIG_SYS_PROMPT "CPUAT91=> " #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 781878ef39..aa7a6ba03e 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -65,7 +65,6 @@ #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * I2C Configuration diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 989472b181..0adbb1fc72 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -143,7 +143,6 @@ #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SPI #define CONFIG_SPI_FLASH diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index 42caf1e42a..bd17419da1 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -45,7 +45,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_COM1 0x01c20000 #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h index b05cfbaa8e..b232c5093f 100644 --- a/include/configs/davinci_dm355leopard.h +++ b/include/configs/davinci_dm355leopard.h @@ -44,7 +44,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_COM1 0x01c20000 #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index a75bce675b..92d722706f 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -45,7 +45,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_COM1 0x01c20000 #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index 4f14e04165..57a614852a 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -73,7 +73,6 @@ extern unsigned int davinci_arm_clk_get(void); #define CONFIG_SYS_NS16550_CLK 24000000 #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* I2C Configuration */ #define CONFIG_HARD_I2C diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index 310d5770de..f0cc780b5e 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -89,7 +89,6 @@ #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /*===================*/ /* I2C Configuration */ /*===================*/ diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 949174a163..c07002a3c1 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -58,7 +58,6 @@ #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /*===================*/ /* I2C Configuration */ /*===================*/ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index c931ede85c..a62d7aa5e8 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -56,7 +56,6 @@ #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* I2C Configuration */ #define CONFIG_HARD_I2C #define CONFIG_DRIVER_DAVINCI_I2C diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index 854099b2a2..fb26643dab 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -90,7 +90,6 @@ #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /*===================*/ /* I2C Configuration */ /*===================*/ diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 1d5cf2c411..13ddc5c06a 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -59,7 +59,6 @@ #define CONFIG_BAUDRATE 115200 /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_TIMESTAMP /* Print image info with timestamp */ #undef CONFIG_BOOTARGS diff --git a/include/configs/debris.h b/include/configs/debris.h index 303630d7d7..32aa4e5065 100644 --- a/include/configs/debris.h +++ b/include/configs/debris.h @@ -294,7 +294,6 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM } /*----------------------------------------------------------------------- diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h index afb1de6388..3238ac7327 100644 --- a/include/configs/eXalion.h +++ b/include/configs/eXalion.h @@ -93,9 +93,6 @@ #define CONFIG_SYS_MAXARGS 8 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_MISC_INIT_R 1 /*----------------------------------------------------------------------- diff --git a/include/configs/ea20.h b/include/configs/ea20.h index 88b085d4a7..4a03546fb9 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -77,7 +77,6 @@ #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SPI #define CONFIG_SPI_FLASH diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 21c471adf6..4d8be2b01e 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -188,8 +188,6 @@ * UART/CONSOLE */ -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 } - #define CONFIG_BAUDRATE 115200 #define CONFIG_ATMEL_USART #define CONFIG_USART_BASE ATMEL_BASE_DBGU diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h index 120055f1d7..eb7d72b2fe 100644 --- a/include/configs/efikamx.h +++ b/include/configs/efikamx.h @@ -94,7 +94,6 @@ #define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} #define CONFIG_MXC_GPIO diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h index 29b0d33991..7dc6cca6cc 100644 --- a/include/configs/enbw_cmc.h +++ b/include/configs/enbw_cmc.h @@ -83,7 +83,6 @@ #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * I2C Configuration diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index 221d3e055d..7adedc99e6 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -376,9 +376,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 604d2dd5f5..5aed0ed308 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -103,7 +103,6 @@ #define CONFIG_ATMEL_USART #define CONFIG_USART3 /* USART 3 is DBGU */ #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS diff --git a/include/configs/flea3.h b/include/configs/flea3.h index dd7c73f3c7..44c5532d86 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -82,7 +82,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /* * Command definition diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h index e27216ac15..cc84c9c964 100644 --- a/include/configs/grasshopper.h +++ b/include/configs/grasshopper.h @@ -191,7 +191,6 @@ #define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x700000) -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } #endif /* __GRASSHOPPER_CONFIG_H */ /* vim: set ts=8 noet: */ diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index 2a40de1fae..7935aea9ae 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -387,9 +387,6 @@ #define CONFIG_SYS_MEMTEST_END ( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \ - CONFIG_SYS_MEM_END_USAGE ) -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h index 6d2d4fb91d..0e9188d032 100644 --- a/include/configs/hawkboard.h +++ b/include/configs/hawkboard.h @@ -98,7 +98,6 @@ #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Network & Ethernet Configuration diff --git a/include/configs/hermes.h b/include/configs/hermes.h index d849b5cc81..0f29cd122c 100644 --- a/include/configs/hermes.h +++ b/include/configs/hermes.h @@ -105,8 +105,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_SYS_ALLOC_DPRAM 1 /* use allocation routines */ /* * Low Level Configuration Settings diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 520fa4cc9e..791f3f5468 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -39,7 +39,6 @@ #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 38400 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_BOOTCOUNT_LIMIT #define CONFIG_SYS_BOOTCOUNT_ADDR 0xfff3cf0c diff --git a/include/configs/idmr.h b/include/configs/idmr.h index 50dd918385..86bfa01cb2 100644 --- a/include/configs/idmr.h +++ b/include/configs/idmr.h @@ -47,7 +47,6 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 19200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #define CONFIG_ETHADDR 00:06:3b:01:41:55 #define CONFIG_ETHPRIME #define CONFIG_IPADDR 192.168.30.1 diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h index ea48d64635..186d8b9113 100644 --- a/include/configs/ima3-mx53.h +++ b/include/configs/ima3-mx53.h @@ -92,7 +92,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /* Command definition */ #include <config_cmd_default.h> diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index c1f1aa6a8a..7d2876b9c5 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -105,7 +105,6 @@ #define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Flash & Environment diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index bbcbce1200..a340e97f00 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -87,7 +87,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /*********************************************************** * Command definition diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index 3153eb5b39..1728358211 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -65,7 +65,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /*********************************************************** * Command definition diff --git a/include/configs/incaip.h b/include/configs/incaip.h index 70c9bb4422..f632a2c8ea 100644 --- a/include/configs/incaip.h +++ b/include/configs/incaip.h @@ -47,9 +47,6 @@ #define CONFIG_BAUDRATE 115200 -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_TIMESTAMP /* Print image info with timestamp */ #define CONFIG_PREBOOT "echo;" \ diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index 0a704cb248..fea40fcfe3 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -65,7 +65,6 @@ #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 38400 #define CONFIG_PL01x_PORTS { (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) } -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SYS_SERIAL0 0x16000000 #define CONFIG_SYS_SERIAL1 0x17000000 diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index 57610a6511..ca2d92d79f 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -74,7 +74,6 @@ #define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 } #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 38400 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SYS_SERIAL0 0x16000000 #define CONFIG_SYS_SERIAL1 0x17000000 diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h index d644fea22f..296bbe1cf5 100644 --- a/include/configs/jadecpu.h +++ b/include/configs/jadecpu.h @@ -182,7 +182,6 @@ #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM + PHYS_SDRAM_SIZE) #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600 } #define CONFIG_SYS_PROMPT "jade> " #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h index 203a4b219b..e49dc28776 100644 --- a/include/configs/kvme080.h +++ b/include/configs/kvme080.h @@ -114,8 +114,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00100000 #define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h index cdf68273f9..bb9603418b 100644 --- a/include/configs/linkstation.h +++ b/include/configs/linkstation.h @@ -282,7 +282,6 @@ */ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 57600 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index 361ffc504e..7c8eb6434d 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -130,9 +130,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #ifdef CONFIG_MMC #define CONFIG_PXA_MMC #define CONFIG_CMD_MMC diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index e23b0a1b2f..405bc69a2e 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -243,8 +243,6 @@ */ #ifdef CONFIG_WATCHDOG #define CONFIG_SYS_BAUDRATE_TABLE { 38400, 57600, 115200 } -#else -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #endif /*----------------------------------------------------------------------*/ diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index c62f4d01fd..b8389e8e5d 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -136,7 +136,6 @@ #define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * MMC Driver diff --git a/include/configs/meesc.h b/include/configs/meesc.h index db1e87d69c..1e897e23e0 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -89,7 +89,6 @@ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600} #define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index 3e7377511c..c0c95ed942 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -107,7 +107,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_TSI108_CSR_RST_BASE+0x7808) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_TSI108_CSR_RST_BASE+0x7C08) -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ #define CONFIG_ZERO_BOOTDELAY_CHECK diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h index 52e15cce87..aca367f8ff 100644 --- a/include/configs/ms7750se.h +++ b/include/configs/ms7750se.h @@ -60,8 +60,6 @@ #define CONFIG_SYS_PBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE 512 -/* List of legal baudrate settings for this board */ -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index 9c1b255e65..81476ecf3a 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -133,9 +133,6 @@ #define CONFIG_SYS_HZ 3686400 #define CONFIG_SYS_CPUSPEED 0x141 -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /*----------------------------------------------------------------------- * Stack sizes * diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index 7210b6e80f..efca287539 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -57,7 +57,6 @@ #define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* No NOR flash present */ #define CONFIG_ENV_OFFSET (6 * 64 * 1024) diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 0c18e5022a..48e6b83be4 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -125,7 +125,6 @@ #define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * DMA diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 87638a4fa5..cc720e8083 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -84,7 +84,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /*********************************************************** * Command definition diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 6ce97bc69f..7634de72cb 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -85,7 +85,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /*********************************************************** * Command definition diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index bd57baa808..a98230a761 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -89,7 +89,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /* * Command definition diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 58b6f1c10d..ba1a129b41 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -138,7 +138,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /*********************************************************** * Command definition diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index f48a41ebc5..333ba617cb 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -80,7 +80,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /* Command definition */ #include <config_cmd_default.h> diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index a77e5b206d..453cef98c6 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -94,7 +94,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /* Command definition */ #include <config_cmd_default.h> diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 99daafb900..c80e5e84bd 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -106,7 +106,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /* Command definition */ #include <config_cmd_default.h> diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index a04db3ff45..7cd7173cd2 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -83,7 +83,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /* Command definition */ #include <config_cmd_default.h> diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index 90652c6629..9fca0e1a4e 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -70,7 +70,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /* Command definition */ #include <config_cmd_default.h> diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index feabc05a47..7469038d7b 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -115,7 +115,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /* Command definition */ #include <config_cmd_default.h> diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h index 20db3972f6..de2077152e 100644 --- a/include/configs/nhk8815.h +++ b/include/configs/nhk8815.h @@ -106,7 +106,6 @@ #define CONFIG_PL011_SERIAL #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CFG_SERIAL0 0x101FD000 #define CFG_SERIAL1 0x101FB000 diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h index c495423ddc..f465a5606b 100644 --- a/include/configs/ns9750dev.h +++ b/include/configs/ns9750dev.h @@ -122,9 +122,6 @@ #define CONFIG_SYS_HZ (CPU_CLK_FREQ/64) -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define NS9750_ETH_PHY_ADDRESS (0x0000) /*----------------------------------------------------------------------- diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h index 43de18b25c..f591a86ab5 100644 --- a/include/configs/omap1510inn.h +++ b/include/configs/omap1510inn.h @@ -83,8 +83,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Command line configuration. diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 46d1643c60..13762ccaf1 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -118,8 +118,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} - /* * Command line configuration. diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index d3a2438e28..639d4a377e 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -81,8 +81,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Command line configuration. diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h index f7900e0d83..f1cadb25fa 100644 --- a/include/configs/omap730p2.h +++ b/include/configs/omap730p2.h @@ -85,8 +85,6 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Command line configuration. diff --git a/include/configs/origen.h b/include/configs/origen.h index d4d0f84be6..6dcd25d8b6 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -117,9 +117,6 @@ #define CONFIG_SYS_HZ 1000 -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* Stack sizes */ #define CONFIG_STACKSIZE (256 << 10) /* 256KB */ diff --git a/include/configs/otc570.h b/include/configs/otc570.h index 85993789b9..7abc42a4f5 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -88,7 +88,6 @@ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600} #define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK diff --git a/include/configs/palmld.h b/include/configs/palmld.h index 88f4bfb453..c4ea5ff307 100644 --- a/include/configs/palmld.h +++ b/include/configs/palmld.h @@ -55,7 +55,6 @@ #define CONFIG_PXA_SERIAL #define CONFIG_FFUART 1 #define CONFIG_BAUDRATE 9600 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Bootloader Components Configuration diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index d1fef258ce..9fa67334a8 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -59,7 +59,6 @@ #define CONFIG_PXA_SERIAL #define CONFIG_FFUART 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Bootloader Components Configuration diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index d056884e7e..810233fbfb 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -54,9 +54,6 @@ #define CONFIG_BAUDRATE 115200 -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_TIMESTAMP /* Print image info with timestamp */ #undef CONFIG_BOOTARGS diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index 43ec38f5d4..19b80d18e2 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -117,8 +117,6 @@ #define CONFIG_IXP425_TIMER_CLK 66666666 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Stack sizes diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index eba5616ddf..cdb3593c4f 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -361,7 +361,6 @@ #endif #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CONFIG_SYS_PROMPT "pm9261> " #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index bf31c13bdc..d202d0ad26 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -394,7 +394,6 @@ #endif #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CONFIG_SYS_PROMPT "u-boot-pm9263> " #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 47798787de..a044346f39 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -167,7 +167,6 @@ "rootfstype=jffs2" #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CONFIG_SYS_PROMPT "U-Boot> " #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h index 4ceee17cd2..5cd660927a 100644 --- a/include/configs/ppmc7xx.h +++ b/include/configs/ppmc7xx.h @@ -368,7 +368,6 @@ /* * Serial port config * - * CONFIG_SYS_BAUDRATE_TABLE - List of valid baud rates * CONFIG_SYS_NS16550 - Include the NS16550 driver * CONFIG_SYS_NS16550_SERIAL - Include the serial (wrapper) driver * CONFIG_SYS_NS16550_CLK - Frequency of reference clock @@ -376,7 +375,6 @@ * CONFIG_SYS_NS16550_COM1 - Base address of 1st serial port */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_CLK 3686400 diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h index 327863ec90..f4c914306f 100644 --- a/include/configs/ppmc8260.h +++ b/include/configs/ppmc8260.h @@ -346,9 +346,6 @@ #define CONFIG_SYS_MEMTEST_END ( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \ - CONFIG_SYS_MEM_END_USAGE ) -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 0666f7ba4f..387661b8fc 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -246,9 +246,6 @@ #define RTC 1 /* enable 32KHz osc */ - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #ifdef CONFIG_MMC #define CONFIG_PXA_MMC #define CONFIG_CMD_MMC diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index f5a137e01d..da32b30e56 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -40,9 +40,6 @@ #define CONFIG_BAUDRATE 115200 -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_TIMESTAMP /* Print image info with timestamp */ #undef CONFIG_BOOTARGS diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h index ebd8223d6f..a3fc465e70 100644 --- a/include/configs/qi_lb60.h +++ b/include/configs/qi_lb60.h @@ -22,7 +22,6 @@ #define CONFIG_SYS_UART_BASE JZ4740_UART0_BASE /* Base of the UART channel */ #define CONFIG_BAUDRATE 57600 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/qong.h b/include/configs/qong.h index 3e36bb0788..3b63ac210a 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -122,7 +122,6 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /*********************************************************** * Command definition diff --git a/include/configs/quantum.h b/include/configs/quantum.h index dcfa29af1c..4f246510fe 100644 --- a/include/configs/quantum.h +++ b/include/configs/quantum.h @@ -142,8 +142,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 9cdfc147e9..65dcffb29b 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -46,8 +46,6 @@ #define CONFIG_SYS_PBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE 512 -/* List of legal baudrate settings for this board */ -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000) diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index b0655c3233..a7b3628298 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -70,8 +70,6 @@ #define CONFIG_SYS_PBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE 512 -/* List of legal baudrate settings for this board */ -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000) diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h index 3a700419f2..df7f40cf54 100644 --- a/include/configs/rsdproto.h +++ b/include/configs/rsdproto.h @@ -161,9 +161,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index e133a17259..f3d3e4d8e4 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -190,9 +190,6 @@ #define CONFIG_SYS_HZ 1000 -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* Stack sizes */ #define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 00db374182..9337d5bcdd 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -215,9 +215,6 @@ #define CONFIG_SYS_HZ 1000 -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* Stack sizes */ #define CONFIG_STACKSIZE (256 << 10) /* regular stack 256KB */ diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index 43036b2d3b..f3b0fc1db6 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -620,9 +620,6 @@ #define CONFIG_SYS_MEMTEST_END ( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \ - CONFIG_SYS_MEM_END_USAGE ) -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h index cdf8659093..316e3fb925 100644 --- a/include/configs/sbc35_a9g20.h +++ b/include/configs/sbc35_a9g20.h @@ -61,7 +61,6 @@ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index 180c5dad42..1494a2ecc4 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -87,7 +87,6 @@ #define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ #define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_BAUDRATE 115200 /* * Definitions related to passing arguments to kernel. diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index 7d163201e3..bfbb2c3ef9 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -144,9 +144,6 @@ #define CONFIG_SYS_HZ 1000 -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* support additional compression methods */ #define CONFIG_BZIP2 #define CONFIG_LZO diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index 0f63040d25..23df401e3f 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -126,9 +126,6 @@ #define CONFIG_SYS_HZ 1000 -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_RD_LVL /* Stack sizes */ diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index a2b9441050..47a3d414cd 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -144,9 +144,6 @@ #define CONFIG_SYS_HZ 1000 -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /*----------------------------------------------------------------------- * Stack sizes * diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 6663629ce1..5ab86651cb 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -183,9 +183,6 @@ #define CONFIG_SYS_HZ 1000 -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /*----------------------------------------------------------------------- * Stack sizes * diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 702134bda3..868e6ae8b6 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -116,9 +116,6 @@ #define CONFIG_SYS_HZ 1000 -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* Stack sizes */ #define CONFIG_STACKSIZE (256 << 10) /* 256KB */ diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index cee65d1695..bb2a46310e 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -104,7 +104,6 @@ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CONFIG_SYS_PROMPT "Snapper> " /* I2C - Bit-bashed */ diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h index e7f5a0d0f1..cbaa643e74 100644 --- a/include/configs/stxxtc.h +++ b/include/configs/stxxtc.h @@ -151,8 +151,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h index 22486807f4..0d939eeb77 100644 --- a/include/configs/svm_sc8xx.h +++ b/include/configs/svm_sc8xx.h @@ -177,8 +177,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/tb0229.h b/include/configs/tb0229.h index fc2b57d11a..4ef835ecb1 100644 --- a/include/configs/tb0229.h +++ b/include/configs/tb0229.h @@ -38,8 +38,6 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_TIMESTAMP /* Print image info with timestamp */ #define CONFIG_PREBOOT "echo;" \ diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h index 7c3f33427c..2dd1a33ca6 100644 --- a/include/configs/tnetv107x_evm.h +++ b/include/configs/tnetv107x_evm.h @@ -71,7 +71,6 @@ #define CONFIG_SYS_NS16550_CLK clk_get_rate(TNETV107X_LPSC_UART1) #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* Flash and environment info */ #define CONFIG_SYS_NO_FLASH diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h index 0043926ee6..def5306012 100644 --- a/include/configs/tny_a9260.h +++ b/include/configs/tny_a9260.h @@ -75,7 +75,6 @@ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/top9000.h b/include/configs/top9000.h index 2c66f33d89..1a5f680682 100644 --- a/include/configs/top9000.h +++ b/include/configs/top9000.h @@ -90,7 +90,6 @@ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } /* SD/MMC card */ #define CONFIG_MMC diff --git a/include/configs/trats.h b/include/configs/trats.h index 5e38de2bc8..2d0a1b163f 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -166,9 +166,6 @@ #define CONFIG_SYS_HZ 1000 -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* Stack sizes */ #define CONFIG_STACKSIZE (256 << 10) /* regular stack 256KB */ diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index af464e1bea..c020ff4eec 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -172,9 +172,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #ifdef CONFIG_MMC #define CONFIG_PXA_MMC #define CONFIG_CMD_MMC diff --git a/include/configs/tt01.h b/include/configs/tt01.h index 2623dbcbf8..9c1d5259cd 100644 --- a/include/configs/tt01.h +++ b/include/configs/tt01.h @@ -171,7 +171,6 @@ /* console is UART2 on TT-01 */ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /* ethernet setup for the onboard smc9118 */ #define CONFIG_MII diff --git a/include/configs/tx25.h b/include/configs/tx25.h index 3dfafa5077..6821528971 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -93,7 +93,6 @@ #define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_MXC_GPIO diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h index 95028de059..2cfbec82b8 100644 --- a/include/configs/u8500_href.h +++ b/include/configs/u8500_href.h @@ -70,7 +70,6 @@ (void *)CFG_SERIAL2 } #define CONFIG_CONS_INDEX 2 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Devices and file systems diff --git a/include/configs/uc100.h b/include/configs/uc100.h index 9da318d427..62ef2c5ed4 100644 --- a/include/configs/uc100.h +++ b/include/configs/uc100.h @@ -182,8 +182,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ /* diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index 1e59ef37a2..d203bb4dd7 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -58,7 +58,6 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 57600 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_BOOTDELAY 2 #define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay diff --git a/include/configs/v37.h b/include/configs/v37.h index a3fdc38ae1..e36d2491cc 100644 --- a/include/configs/v37.h +++ b/include/configs/v37.h @@ -142,8 +142,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/vct.h b/include/configs/vct.h index 9ddc7b1b67..0a5ce6459c 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -74,7 +74,6 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_CLK 921600 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * SDRAM diff --git a/include/configs/versatile.h b/include/configs/versatile.h index bb835e084d..ff23a92d91 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -93,7 +93,6 @@ #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 38400 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SYS_SERIAL0 0x101F1000 #define CONFIG_SYS_SERIAL1 0x101F2000 diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h index 466d930b98..bf882b0746 100644 --- a/include/configs/virtlab2.h +++ b/include/configs/virtlab2.h @@ -160,8 +160,6 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/vision2.h b/include/configs/vision2.h index f6904f3f6a..76ab1bd2e6 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -136,7 +136,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 3 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /*********************************************************** * Command definition diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index 7802f4449d..ed18dbeb32 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -76,7 +76,6 @@ #define CONFIG_PXA_SERIAL #define CONFIG_FFUART 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Bootloader Components Configuration diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 941f80cb97..a0cc2478b2 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -67,9 +67,6 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */ - - /* * BOOTP options */ diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index afe1e891dd..cacf7ea6c0 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -67,7 +67,6 @@ #define CONFIG_PXA_SERIAL #define CONFIG_STUART 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Bootloader Components Configuration diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index d7ce6c64de..4573149ded 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -69,7 +69,6 @@ #define CONFIG_MXC_UART_BASE UART2_BASE #define CONFIG_CONS_INDEX 1 /* use UART2 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Ethernet @@ -167,6 +167,7 @@ cat << EOF >> config.h #include <config_defaults.h> #include <configs/${CONFIG_NAME}.h> #include <asm/config.h> +#include <config_fallbacks.h> EOF exit 0 |