u-boot.git/tools/env, branch LABEL_2005_02_07_2045

* Code cleanup, mostly for GCC-3.3.x

2004-12-31T09:32:47+00:00

* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
  pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
  additional ethernet addresses.

* Cleanup drivers/i82365.c - avoid duplication of code

* Fix bogus "cannot span across banks" flash error message

* Add support for CompactFlash for the CPC45 Board.

* Code cleanup:

2003-06-27T21:31:46+00:00

  - remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)

Patch by Murray Jensen, 20 Jun 2003:

2003-06-21T00:17:24+00:00

- hymod update
- cleanup (especially for gcc-3.x compilers)

* Make sure Block Lock Bits get cleared in R360MPI flash driver

2003-04-20T14:04:18+00:00

* MPC823 LCD driver: Fill color map backwards, to allow for steady
  display when Linux takes over

* Patch by Erwin Rol, 27 Feb 2003:
  Add support for RTEMS (this time for real).

* Add support for "bmp info" and "bmp display" commands to load
  bitmap images; this can be used (for example in a "preboot"
  command) to display a splash screen very quickly after poweron.

* Add support for 133 MHz clock on INCA-IP board

* Patch by Lutz Dennig, 10 Apr 2003:

2003-04-12T23:38:12+00:00

  Update for R360MPI board

* Add new meaning to "autostart" environment variable:
  If set to "no", a standalone image passed to the
  "bootm" command will be copied to the load address
  (and eventually uncompressed), but NOT be started.
  This can be used to load and uncompress arbitrary
  data.

* Set max brightness for MN11236 displays on TRAB board

* Patch by Josef Wagner, 12 Mar 2003:

2003-03-12T10:41:04+00:00

  - 16/32 MB and 50/80 MHz support with auto-detection for IP860
  - ETH05 and BEDBUG support for CU824
  - added support for MicroSys CPC45
  - new BOOTROM/FLASH0 and DOC base for PM826

* Patch by Robert Schwebel, 12 Mar 2003:
  Fix the chpart command on innokom board

* Name cleanup:
  mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
  s/PPCBoot/U-Boot/ in some files
  s/pImage/uImage/  in some files

* Patch by Detlev Zundel, 15 Jan 2003:
  Fix '' command line quoting

* Patch by The LEOX team, 19 Jan 2003:
  - add support for the ELPT860 board
  - add support for Dallas ds164x RTC

* Add support for 16 MB flash configuration of TRAB board

2003-02-28T00:49:47+00:00

* Patch by Erwin Rol, 27 Feb 2003:
  Add support for RTEMS

* Add image information to README

* Fix dual PCMCIA slot support (when running with just one
  slot populated)

* Add VFD type detection to trab board

* extend drivers/cs8900.c driver to synchronize  ethaddr  environment
  variable with value in the EEPROM

* Start adding MIPS support files

Add "pcidelay" environment variable (in ms, enabled via CONFIG_PCI_BOOTDELAY).

2003-02-14T11:21:23+00:00

* Restrict baudrate settings on LWMON to higher speeds

2003-01-11T09:48:40+00:00

  when watchdog is on

* Update baudrate in bd_info when it gets changed

* Add watchdog trigger points while waiting for serial port
  (so far only 8xx -- needed on LWMON with 100ms watchdog)

* Improve command line tool to access the U-Boot's environment
  (figuration of the utility, using a config file)

* Use 1-byte-read instead of -write for iprobe() function

2002-12-17T01:51:00+00:00

  Add i2c commands to PM826 config

* extend I2C POST code: check for list on known addresses