u-boot.git/post, branch LABEL_2005_09_15_2320

Fix sysmon POST problem: check I2C error codes

2005-07-28T08:42:26+00:00

This fixes a problem of displaying bogus voltages when the voltages
are so low that the I2C devices start failing while the rest of the
system keeps running.

Fix watchdog reset problems on LWMON board

2005-06-05T20:30:43+00:00

* Patch by Detlev Zundel, 08 Sep 2004:

2004-09-08T22:03:11+00:00

  Update etags build target

* Improve NetConsole support: add support for broadcast destination
  address and buffered input.

* Cleanup compiler warnings for GCC 3.3.x and later

* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch

* Code cleanup

2004-08-01T22:48:16+00:00

* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)

Patch by Pantelis Antoniou, 5 May 2004:

2004-06-07T23:46:25+00:00

- Intracom board update.
- Add Codec POST.

* Patches by Pantelis Antoniou, 30 Mar 2004:

2004-04-15T21:16:42+00:00

  - add support for the Epson 156x series of graphical displays
    (These displays are serial and not suitable for using a normal
    framebuffer console on them)
  - add infrastructure needed in order to POST any DSPs in a board

Patch by Pierre Aubert, 15 Mar 2004:

2004-03-17T01:13:07+00:00

Fix buffer overflow in IDE identification

* Patches by Reinhard Meyer, 14 Feb 2004:

2004-02-23T22:22:28+00:00

  - update board/emk tree; use common flash driver
  - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
    [adapted for other PPC CPUs -- wd]
  - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c

* Patch by Jon Diekema, 13 Feb 2004:
  Call show_boot_progress() whenever POST "FAILED" is printed.

* Patch by Nishant Kamat, 13 Feb 2004:
  Add support for TI OMAP1610 H2 Board
  Fixes for cpu/arm926ejs/interrupt.c
       (based on Richard Woodruff's patch for arm925, 16 Oct 03)
  Fix for a timer bug in OMAP1610 Innovator
  Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2

* Patches by Stephan Linz, 12 Feb 2004:
  - add support for NIOS timer with variable period preload counter value
  - prepare POST framework support for NIOS targets

* Patch by Denis Peter, 11 Feb 2004:
  add POST support for the MIP405 board

Add Auto-MDIX support for INCA-IP

2004-02-20T22:02:48+00:00

* The PS/2 mux on the BMS2003 board needs 450 ms after power on

2004-01-20T23:12:12+00:00

  before we can access it; add delay in case we are faster (with no
  CF card inserted)

* Cleanup of some init functions

* Make sure SCC Ethernet is always stopped by the time we boot Linux
  to avoid Linux crashes by early packets coming in.

* Accelerate flash accesses on LWMON board by using buffered writes