u-boot.git/include/usb, branch v2011.12

usb: s3c_udc_otg: fix GCC 4.6 build warnings

2011-12-20T22:20:01+00:00

Fix:
In file included from s3c_udc_otg.c:216:0:
s3c_udc_otg_xfer_dma.c: In function 'complete_tx':
s3c_udc_otg_xfer_dma.c:280:33: warning: variable 'is_short' set but not used
s3c_udc_otg_xfer_dma.c:280:6: warning: variable 'ep_tsr' set but not used
s3c_udc_otg_xfer_dma.c: In function 's3c_udc_irq':
s3c_udc_otg_xfer_dma.c:469:16: warning: variable 'flags' set but not used
s3c_udc_otg_xfer_dma.c:468:18: warning: variable 'gintmsk' set but not used
s3c_udc_otg_xfer_dma.c: In function 's3c_queue':
s3c_udc_otg_xfer_dma.c:582:14: warning: variable 'gintsts' set but not used
s3c_udc_otg_xfer_dma.c:581:16: warning: variable 'flags' set but not used
s3c_udc_otg_xfer_dma.c: In function 's3c_ep0_read':
s3c_udc_otg_xfer_dma.c:778:6: warning: variable 'ret' set but not used
s3c_udc_otg_xfer_dma.c: In function 's3c_udc_set_halt':
s3c_udc_otg_xfer_dma.c:1020:16: warning: variable 'flags' set but not used
s3c_udc_otg_xfer_dma.c: In function 's3c_ep0_setup':
s3c_udc_otg_xfer_dma.c:1258:13: warning: initialization from incompatible
pointer type [enabled by default]
s3c_udc_otg_xfer_dma.c:1239:16: warning: variable 'is_in' set but not used
s3c_udc_otg_xfer_dma.c:1239:9: warning: variable 'bytes' set but not used
s3c_udc_otg.c: In function 'usb_gadget_register_driver':
s3c_udc_otg.c:292:16: warning: variable 'flags' set but not used
s3c_udc_otg.c: In function 'usb_gadget_unregister_driver':
s3c_udc_otg.c:338:16: warning: variable 'flags' set but not used
s3c_udc_otg.c: In function 's3c_ep_enable':
s3c_udc_otg.c:582:16: warning: variable 'flags' set but not used
s3c_udc_otg.c: In function 's3c_ep_disable':
s3c_udc_otg.c:646:16: warning: variable 'flags' set but not used
s3c_udc_otg.c: In function 's3c_dequeue':
s3c_udc_otg.c:704:16: warning: variable 'flags' set but not used

Signed-off-by: Anatolij Gustschin 
Cc: Lukasz Majewski 
Cc: Remy Bohmer

USB: ULPI: clean a mixup of return types

2011-12-16T20:03:37+00:00

Clean a mixup between u32 and int as a return type
for functions returning error values.
Use int as it is native (and widely used) return type.

Signed-off-by: Igor Grinberg 
Acked-by: Simon Glass

USB: ULPI: switch argument type from u8 to unsigned

2011-12-16T20:00:23+00:00

There is no benefit in using u8, so switch to unsigned to reduce the
binary image size (by 20 bytes).

Signed-off-by: Igor Grinberg 
Acked-by: Simon Glass

USB: Add generic ULPI layer and a viewport

2011-12-11T13:50:09+00:00

Add partial ULPI specification implementation that should be enough to
interface the ULPI PHYs in the boot loader context.
Add a viewport implementation for Chipidea/ARC based controllers.

Signed-off-by: Jana Rapava 
Signed-off-by: Igor Grinberg 
Cc: Remy Bohmer 
Cc: Stefano Babic 
Cc: Wolfgang Grandegger 
Cc: Simon Glass

USB: MX5: Abstract out mx51 USB pixmux configuration

2011-12-11T13:49:37+00:00

Signed-off-by: Marek Vasut 
Cc: Stefano Babic 
Cc: Remy Bohmer 
Cc: Wolfgang Grandegger 
Cc: Jason Liu

USB: MX5: add generic USB EHCI support for mx51 and mx53

2011-12-11T13:49:31+00:00

It's derived from ehci-mxc and uses the header files of the
ehci-fsl interface. The callback board_ehci_hcd_init() has
been introduced to allow for board-specific setup when USB
is started.

Signed-off-by: Wolfgang Grandegger 
CC: Stefano Babic 
CC: Remy Bohmer

usb:gadget:s5p USB Device Controller (UDC) implementation

2011-12-11T13:44:40+00:00

This commit provides UDC driver support for Samsung's SoC
family of processors.

Signed-off-by: Lukasz Majewski 
Signed-off-by: Marek Szyprowski 
Signed-off-by: Kyungmin Park 
Cc: Minkyu Kang 
Cc: Remy Bohmer

ehci-fsl: correct size of ehci caplength

2011-12-11T13:40:38+00:00

According to the EHCI specification the Capability Register Length
has a size of 8 bits.

Signed-off-by: Wolfgang Grandegger 
Acked-by: Kumar Gala

USB: gadaget: add Marvell controller support

2011-12-11T13:40:38+00:00

Signed-off-by: Lei Wen

Fix building for 83xx boards with USB support

2010-10-21T18:00:41+00:00

Commit 29c6fbe0471afd7ffa41fcb2103eec5b53294897 broke
building for 83xx boards with USB support:

ehci-fsl.c: In function 'ehci_hcd_init':
ehci-fsl.c:43: error: 'CONFIG_SYS_FSL_USB_ADDR' undeclared (first use in this function)
ehci-fsl.c:43: error: (Each undeclared identifier is reported only once
ehci-fsl.c:43: error: for each function it appears in.)
make[1]: *** [ehci-fsl.o] Error 1

Signed-off-by: Anatolij Gustschin