u-boot.git/include/usb.h, branch v2011.09-rc2

usb: increase non-bulk timeout for slow chipsets.

2011-08-08T20:34:57+00:00

If you take a look at 96820a35, you'll see the original timeout was
CONFIG_SYS_HZ.  Which is 1000.  After the mentioned change, non-bulk timeout
was changed to 100.  This causes timeout failures on the dreamplug platform
when trying to initialize the usb microsd reader.

Signed-off-by: Jason Cooper 
Acked-by: Mike Frysinger

Add USB host ethernet adapter support

2011-02-19T19:32:36+00:00

This adds support for using USB Ethernet dongles in host mode. This is just
the framework - drivers will come later. A new config option called
CONFIG_USB_HOST_ETHER can be defined in board config files to switch this
on.

The was originally written by NVIDIA and was cleaned up for release by the
Chromium authors.

Signed-off-by: Simon Glass

Fix EHCI usb submit timeout and unify with OHCI

2011-02-19T19:32:34+00:00

Changed both to use a common timeout for URB submission, since they were using
different values and EHCI's was too short.

Also fixed EHCI to actually check if urb submission succeeded, rather than
silently continuing into the weeds.

Change-Id: I7f71499ffaa05187d8e5618db2419e1606007b82

Signed-off-by: Simon Glass

musb: MSC host support for AM35x

2010-08-12T14:40:00+00:00

Tested MSC Host on AM3517EVM.

Signed-off-by: Ajay Kumar Gupta

USB: fix create_pipe()

2010-05-27T18:59:48+00:00

create_pipe() can give wrong result if an expression is passed as the 'endpoint'
argument -- due to missing parentheses.

Thanks to Martin Mueller for finding the bug and providing the patch.

Signed-off-by: Sergei Shtylyov

usb: musb: add support for Blackfin MUSB

2010-01-09T09:25:09+00:00

Signed-off-by: Bryan Wu 
Signed-off-by: Cliff Cai 
Signed-off-by: Mike Frysinger 
Signed-off-by: Remy Bohmer

DA8xx: Add MUSB host support

2010-01-09T09:25:07+00:00

Tested USB host functionality on DA830 EVM.

Signed-off-by: Ajay Kumar Gupta 
Signed-off-by: Swaminathan S

OMAP3 Add usb device support

2009-12-20T11:47:37+00:00

This change adds the usb device support for musb.

Omap3 platform support added at the same level as davinci.

The interface for usbtty to use the musb device support was added.

Verified on omap3 beagle, zoom1 and zoom2.

Signed-off-by: Tom Rix

USB Consolidate descriptor definitions

2009-12-20T11:47:37+00:00

The header files usb.h and usbdescriptors.h have the same nameed
structure definitions for

usb_config_descriptor
usb_interface_descriptor
usb_endpoint_descriptor
usb_device_descriptor
usb_string_descriptor

These are out right duplicates in usb.h

usb_device_descriptor
usb_string_descriptor

This one has extra unused elements

usb_endpoint_descriptor

	unsigned char	bRefresh
	unsigned char	bSynchAddress;

These in usb.h have extra elements at the end of the usb 2.0
specified descriptor and are used.

usb_config_descriptor
usb_interface_descriptor

The change is to consolidate the definition of the descriptors
to usbdescriptors.h.  The dublicates in usb.h are removed.
The extra element structure will have their name shorted by
removing the '_descriptor' suffix.

So

usb_config_descriptor -> usb_config
usb_interface_descriptor -> usb_interface

For these, the common descriptor elements are accessed now
by an element 'desc'.

As an example

-	if (iface->bInterfaceClass != USB_CLASS_HUB)
+	if (iface->desc.bInterfaceClass != USB_CLASS_HUB)

This has been compile tested on MAKEALL arm, ppc and mips.

Signed-off-by: Tom Rix

usb : musb : Enabling DM6446 (TI DaVinci) USB module power

2009-01-28T18:57:30+00:00

Enabling DM6446 (TI DaVinci) USB module power and MUSB low-level
controller hook up to USB core layer.

Signed-off-by: Ravi Babu 
Signed-off-by: Swaminathan S 
Signed-off-by: Thomas Abraham 
Signed-off-by: Ajay Kumar Gupta 
Signed-off-by: Remy Bohmer