u-boot.git/include/configs, branch master

arm: Add support for Kobol Helios64 board

2021-06-12T19:39:14+00:00

The hardware is described in detail on Kobol's wiki at
https://wiki.kobol.io/helios64/intro/.

This commit is based on downstream work in Armbian by Aditya Prayoga [1].
The devicetree is taken from Linux v5.12-rc1 and was originally submitted there by
Uwe Kleine-Koenig [2].

[1] https://github.com/ukleinek/armbian-build/blob/35c85295d351830aa59b624db524ba04b238faae/patch/kernel/rockchip64-current/add-board-helios64.patch
[2] https://github.com/torvalds/linux/blob/7a7fd0de4a9804299793e564a555a49c1fc924cb/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts

Signed-off-by: Dennis Gilmore

arm64: mvebu: correct Armada 8K addresses

2021-06-10T05:18:06+00:00

0x04000000- 0x06000000 is reserved memory. We cannot load to anything here.

Signed-off-by: Heinrich Schuchardt 
Reviewed-by: Stefan Roese

arm: mvebu: configs: turris_mox: add fdtfile default env variable

2021-06-10T05:18:06+00:00

Add default fdtfile environment variable with value
marvell/armada-3720-turris-mox.dtb.

This can be useful for some boot scenarios.

Signed-off-by: Marek Behún 
Reviewed-by: Pali Rohár 
Reviewed-by: Stefan Roese

arm: mvebu: turris_mox: add support for board rescue mode

2021-06-10T05:18:06+00:00

Add necessary config options and board code to support board factory
reset / rescue mode on Turris MOX.

In order to also support invoking rescue mode from U-Boot console,
without having to press the factory reset button, put the rescue command
into `bootcmd_rescue` default environment variable. When factory reset
button is pressed, invoke rescue mode via distroboot by setting
`boot_targets` to `rescue`.

Rescue boot from console can be invoked by running
  run bootcmd_rescue

Signed-off-by: Marek Behún 
Reviewed-by: Pali Rohár 
Reviewed-by: Stefan Roese

arm: mvebu: turris_omnia: support invoking rescue boot from console

2021-06-04T09:32:41+00:00

Make it possible to invoke rescue boot from U-Boot console, without
having to press the factory reset button. This is needed when accessing
the device remotely, for example.

Achieve this by putting rescue command into `bootcmd_rescue` default
environment variable and setting some distroboot environment variables
to their default values when the factory button is pressed.

Rescue boot from console can be invoked by running
  run bootcmd_rescue

Signed-off-by: Marek Behún 
Reviewed-by: Pali Rohár 
Reviewed-by: Stefan Roese

board: sifive: add HiFive Unmatched board support

2021-05-31T08:35:55+00:00

Add defconfig and board support for HiFive Unmatched.

Signed-off-by: Green Wan 
Reviewed-by: Bin Meng 
Reviewed-by: Rick Chen

MIPS: remove deprecated qemu_mips board

2021-05-25T13:35:06+00:00

Remove qemu_mips boards because DM migration doesn't make sense.
The board support for qemu_mips is already marked as deprecated
in Qemu in favour of the Malta board. Also qemu_mips support
has been removed from Linux a long time ago.

The official replacement is the Malta board. The same Malta U-Boot
image can be used with Qemu and on physical hardware.
All combinations of Big Endian and Little Endian as well as 32 bit
and 64 bit are supported.

Signed-off-by: Daniel Schwierzeck

riscv: Enable AI ram on K210

2021-05-14T08:20:49+00:00

We just need to initialize all the clocks pre-reloc. The clock driver
creates a bunch of devices, so we need to increase the pre-reloc malloc
arena.

Signed-off-by: Sean Anderson

Merge tag 'ti-v2021.07-rc3' of https://source.denx.de/u-boot/custodians/u-boot-ti

2021-05-12T14:07:21+00:00

- Initial support for AM64 EVM and SK
- K3 DDR driver unification for J7 and AM64 platforms.
- Minor fixes for TI clock driver

include: configs: Update env for selecting right dtb

2021-05-12T11:02:44+00:00

Now that single defconfig can be used for booting AM64 EVM and SK,
default device tree will not work for selecting dtb for kernel.
Update the env to select right dtb based on eeprom.

Signed-off-by: Lokesh Vutla