u-boot.git/include/asm-nios2, branch v1.3.4

nios2: fix phys_addr_t and phys_size_t support

2008-08-03T00:19:16+00:00

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

Change bd/gd memsize/ram_size to be phys_size_t.

2008-06-11T22:54:53+00:00

Currently, both are defined as an unsigned long, but
should be phys_size_t. This should result in no real change,
since phys_size_t is currently an unsigned long for all the
default configs.  Also add print_lnum to cmd_bdinfo to deal
with the potentially wider memsize.

Signed-off-by: Becky Bruce

POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags.

2008-05-20T21:24:38+00:00

This way we become able to utilize the full post_log_word for POST
activities (overwise, POST ECC, which has 0x8000 ID, could be
erroneously treated as started in post_output_backlog() even if there
was actually no POST ECC run (because of OCM POST failure, for
example).

Signed-off-by: Yuri Tikhonov

POST: add POST_STOP flag

2008-05-20T21:24:37+00:00

Don't run futher tests in case of a test fails that is marked as
POST_STOP.

Signed-off-by: Ilya Yanok 
Signed-off-by: Yuri Tikhonov

Introduce phys_size_t and move phys_addr_t into asm/types.h

2008-04-14T00:13:46+00:00

Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's
that have larger physical addresses like 44x, 85xx, and 86xx.

Signed-off-by: Kumar Gala

The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.

2008-03-18T21:24:48+00:00

Signed-off-by: Dmitry Rakhchev 
Signed-off-by: Yuri Tikhonov

Remove the __STRICT_ANSI check from the u64/__s64 declaration on 32bit targets.

2008-03-02T20:11:11+00:00

The previous patch was lacking of i386, microblaze, nios and nios2. This
patch tries to fix them.

Signed-off-by: Shinya Kuribayashi

Introduce map_physmem() and unmap_physmem()

2007-12-13T12:15:16+00:00

map_physmem() returns a virtual address which can be used to access a
given physical address without involving the cache. unmap_physmem()
should be called when the virtual address returned by map_physmem() is
no longer needed.

This patch adds a stub implementation which simply returns the
physical address cast to a uchar * for all architectures except AVR32,
which converts the physical address to an uncached virtual mapping.
unmap_physmem() is a no-op on all architectures, but if any
architecture needs to do such mappings through the TLB, this is the
hook where those TLB entries can be invalidated.

Signed-off-by: Haavard Skinnemoen

Implement __raw_{read,write}[bwl] on all architectures

2007-12-13T12:15:04+00:00

This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
from Linux.

Signed-off-by: Haavard Skinnemoen

[PATCH v3] Add sync to ensure flash_write_cmd is fully finished

2007-02-21T15:52:31+00:00

Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
is fully finished. The sync() is defined in each CPU's io.h file. For
those CPUs which do not need sync for now, a dummy sync() is defined in
their io.h as well.

Signed-off-by: Haiying Wang