u-boot.git/drivers/usb, branch master Unnamed repository; edit this file 'description' to name the repository. usb: dwc2: Avoid delay when initializing USB peripheral by dwc2 2021-06-09T08:54:26+00:00 João Loureiro joaofl@gmail.com 2021-03-17T15:52:21+00:00 dcd2bbe0510d7d47d745eeea063496a83cb3b08e When `usb start` is called on the terminal, the dwc2 driver will try to start every USB device as host first, even if it is explicitly configured as peripheral in the device tree (dr_mode = "peripheral"). So to avoid an unwanted 15 seconds delay when initializing the usb (one second per channel = 1s x 15), this patch adds a check to the initialization, and will skip host initialization of the device is explicitly set as peripheral. The checking is already done similarly in the `drivers/usb/gadget/dwc2_udc_otg.c` driver. Signed-off-by: João Loureiro <joaofl@gmail.com> 
When `usb start` is called on the terminal, the dwc2 driver will try
to start every USB device as host first, even if it is explicitly
configured as peripheral in the device tree (dr_mode = "peripheral").

So to avoid an unwanted 15 seconds delay when initializing the usb
(one second per channel = 1s x 15), this patch adds a check to the
initialization, and will skip host initialization of the device is
explicitly set as peripheral. The checking is already done similarly
in the `drivers/usb/gadget/dwc2_udc_otg.c` driver.

Signed-off-by: João Loureiro <joaofl@gmail.com>
usb: cdns3: cdns3-ti: Fix clk_get_by_name() to get the correct name 2021-06-08T20:01:20+00:00 Kishon Vijay Abraham I kishon@ti.com 2021-06-01T10:56:16+00:00 c2d21e0ac087a153f1c4632e4ce46668bbf83633 Kernel device tree got updated to use clock name as "ref" instead of "usb2_refclk". Fix cdns3-ti.c to use the correct name. Fixes: 70e167495ab2 ("arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot") Fixes: 6239cc8c4e84 ("arm: dts: k3-j7200: Sync Linux v5.11-rc6 dts into U-Boot") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> 
Kernel device tree got updated to use clock name as "ref" instead of
"usb2_refclk". Fix cdns3-ti.c to use the correct name.

Fixes: 70e167495ab2 ("arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot")
Fixes: 6239cc8c4e84 ("arm: dts: k3-j7200: Sync Linux v5.11-rc6 dts into U-Boot")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
usb: dwc3-generic: Disable host driver definition if gadget only 2021-05-16T17:01:45+00:00 Kunihiko Hayashi hayashi.kunihiko@socionext.com 2021-05-12T14:11:14+00:00 a5f9be1ed5a5e3a89478edd2f544e667046cd5ea Even if only USB gadget is defined, dwc3 generic driver enables a definition and probe/remove functions for host driver. This enables the definition if USB_HOST is enabled only. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> 
Even if only USB gadget is defined, dwc3 generic driver enables
a definition and probe/remove functions for host driver.

This enables the definition if USB_HOST is enabled only.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
usb: musb-new: Extend and move Allwinner quirk into Kconfig 2021-05-16T17:01:45+00:00 Andre Przywara andre.przywara@arm.com 2021-05-05T12:51:03+00:00 1027f28bd4be8c78eff1dd8d9261ebe01016943a All newer Allwinner SoCs (since about 2013) miss the CONFIGDATA register in their MUSB implementation, so they need a quirk to hardcode this. Currently this quirk depends on listing the SoCs affected in musb_reg.h, which means that this list needs to grow with every new chip. Move the quirk feature into Kconfig, next to PIO_ONLY, and change the default to y (for Allwinner builds), while listing the early implementations as exceptions. This fixes USB peripheral operation on some newer SoCs, which were not explicitly listed before. Tested on H6, H616, R40 (which were broken before), and also on the H5 and A20, for regressions. Signed-off-by: Andre Przywara <andre.przywara@arm.com> 
All newer Allwinner SoCs (since about 2013) miss the CONFIGDATA register
in their MUSB implementation, so they need a quirk to hardcode this.

Currently this quirk depends on listing the SoCs affected in musb_reg.h,
which means that this list needs to grow with every new chip.

Move the quirk feature into Kconfig, next to PIO_ONLY, and change the
default to y (for Allwinner builds), while listing the early
implementations as exceptions.

This fixes USB peripheral operation on some newer SoCs, which were not
explicitly listed before.

Tested on H6, H616, R40 (which were broken before), and also on the H5
and A20, for regressions.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
usb: dwc3-meson-g12a: skip phy on -ENODATA aswell 2021-05-14T15:41:12+00:00 Neil Armstrong narmstrong@baylibre.com 2021-05-05T08:38:57+00:00 60e531fabfaa6b844fa263279f752e868e6d555c If the PHY isn't specified in the DT, -ENODATA means it should be skipped, handle it like -ENOENT. With that, devices without USB3 supported can have USB working (Odroid-HC4). Fixes: adb049abf7 ("usb: dwc3: Add Meson G12A USB Glue") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 
If the PHY isn't specified in the DT, -ENODATA means it should be skipped,
handle it like -ENOENT.

With that, devices without USB3 supported can have USB working (Odroid-HC4).

Fixes: adb049abf7 ("usb: dwc3: Add Meson G12A USB Glue")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
usb: ehci-mx6: Limit PHY address parsing to !CONFIG_PHY 2021-04-28T15:16:18+00:00 Marek Vasut marex@denx.de 2021-04-22T19:06:40+00:00 53396d67baef4acbcc257c5f2c702935b62cc858 For systems which use generic PHY support and implement USB PHY driver, the parsing of PHY properties is unnecessary, disable it. Signed-off-by: Marek Vasut <marex@denx.de> Tested-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> 
For systems which use generic PHY support and implement USB PHY driver,
the parsing of PHY properties is unnecessary, disable it.

Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
usb: ehci-hcd: Add IAA handshake for removing async QH 2021-04-22T19:09:57+00:00 Ye Li ye.li@nxp.com 2021-03-09T03:26:57+00:00 e1769da17ed339bc937d30c49176bc3664b261af According to EHCI spec, software needs to do handshake with HC for safely removing QH from async list. This handshake is implemented by setting IAAD (Interrupt on Async Advance Doorbell) bit in USB_USBCMD register and poll the IAA (Interrupt on Async Advance bit) in the USB_USBSTS to ensure the HC has released all on-chip state that may potentially reference one of the data structures just removed. Current codes only check active status of the last QTD, but this can't ensure the QH is released from HC. We can meet unrecoverable "EHCI timed out on TD" errors when running UEFI SCT tests on USB disk. The USB_ASYNCLISTADDR register is changed to a invalid address when the issue happens. It is fixed after adding the IAA handshake. Steps to reproduce the issue: 1. Build the UEFI SCT from https://github.com/tianocore/edk2-test 2. Build the EDK2 UEFI Shell from https://github.com/tianocore/edk2 3. Copy SCT files and Shell.efi to USB disk FAT partition 4. Load the Shell.efi from USB FAT, and run bootefi to execute it 5. After booting into Shell, enter the SCT directory and run "sct -a" to execute all tests. 6. Tests run about 1 hour and stop with many EHCI timeout errors like EHCI timed out on TD - token=0x801f8c80 Signed-off-by: Ye Li <ye.li@nxp.com> 
According to EHCI spec, software needs to do handshake with HC for
safely removing QH from async list. This handshake is implemented by
setting IAAD (Interrupt on Async Advance Doorbell) bit in USB_USBCMD
register and poll the IAA (Interrupt on Async Advance bit) in the
USB_USBSTS to ensure the HC has released all on-chip state that may
potentially reference one of the data structures just removed.

Current codes only check active status of the last QTD, but this can't
ensure the QH is released from HC. We can meet unrecoverable
"EHCI timed out on TD" errors when running UEFI SCT tests on USB disk.
The USB_ASYNCLISTADDR register is changed to a invalid address when the
issue happens. It is fixed after adding the IAA handshake.

Steps to reproduce the issue:
1. Build the UEFI SCT from https://github.com/tianocore/edk2-test
2. Build the EDK2 UEFI Shell from https://github.com/tianocore/edk2
3. Copy SCT files and Shell.efi to USB disk FAT partition
4. Load the Shell.efi from USB FAT, and run bootefi to execute it
5. After booting into Shell, enter the SCT directory and run "sct -a"
   to execute all tests.
6. Tests run about 1 hour and stop with many EHCI timeout errors like
   EHCI timed out on TD - token=0x801f8c80

Signed-off-by: Ye Li <ye.li@nxp.com>
usb: ehci-mx6: Add iMX8M support 2021-04-18T02:29:36+00:00 Marek Vasut marex@denx.de 2021-04-02T12:07:22+00:00 5e7e2a8e4f1e6d480f66822270bbf14c045aace0 The iMX8M uses nop PHY, select PHY and NOP_PHY automatically. Otherwise, the DM capable driver is now perfectly compatible. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> 
The iMX8M uses nop PHY, select PHY and NOP_PHY automatically.
Otherwise, the DM capable driver is now perfectly compatible.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
usb: ehci-mx6: Fix aarch64 build warnings 2021-04-18T02:29:36+00:00 Marek Vasut marex@denx.de 2021-04-06T18:37:16+00:00 f444f8986b4c74b63cbf421635387df120d3cb4f Fix cast from pointer to integer of different size by casting the pointer to uintptr_t instead of uint32_t, the former has correct size on both 32bit and 64bit architectures. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> 
Fix cast from pointer to integer of different size by casting the
pointer to uintptr_t instead of uint32_t, the former has correct
size on both 32bit and 64bit architectures.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
usb: ehci-mx6: Add fsl,imx7d-usb compatible string 2021-04-18T02:29:36+00:00 Marek Vasut marex@denx.de 2021-04-02T11:07:59+00:00 e87015ff05d49b8e18367d05658cc092b5f94cc8 Add new compatible string, used by some more up-to-date DTs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> 
Add new compatible string, used by some more up-to-date DTs.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>