u-boot.git/drivers/power/Makefile, branch master

sunxi: Add support for AXP305 PMIC

2021-01-25T21:52:00+00:00

This PMIC can be found on H616 boards and it's very similar to AXP805
and AXP806.

Signed-off-by: Jernej Skrabec 
Reviewed-by: Andre Przywara 
Reviewed-by: Jaehoon Chung 
Signed-off-by: Andre Przywara

poweroff: add poweroff for mt6323 pmic

2020-01-10T15:25:13+00:00

this adds poweroff to bananapi r2 / mt7623 / mt6323 pmic

Signed-off-by: Frank Wunderlich

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

power: Move as3722 pmic to pmic/ directory

2017-04-30T14:29:49+00:00

Most of the PMICs are in the drivers/power/pmic/ directory. Move this one
there.

Signed-off-by: Simon Glass

power: Rename CONFIG_AS3722_POWER to CONFIG_PMIC_AS3722

2017-04-30T14:29:47+00:00

Before converting this to Kconfig, rename it to match the other PMICs.

Signed-off-by: Simon Glass

sunxi: power: add AXP809 support

2016-05-25T15:52:39+00:00

The A80 uses the AXP809 as its primary PMIC.

Signed-off-by: Chen-Yu Tsai 
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede

sunxi: power: add support for sy8106a driver

2016-02-23T19:50:07+00:00

SY8106A is a PMIC which is used on the Allwinner
H3 Orange Pi Pc and Plus board. The VOUT1_SEL register is
implemented to set the default V-CPU voltage to 1200 mV.

This driver is required to ensure the SY8106A V-CPU
voltage is set to 1200 mV after a software reset. On cold
boot the default SY8106A output voltage is selected to be
1200 mV by a pair of resistors on the Orange Pi PC and Plus.

Signed-off-by: Jelle van der Waa 
Tested-by: Siarhei Siamashka 
Acked-by: Siarhei Siamashka 
Signed-off-by: Hans de Goede

sunxi: power: axp818: add support for axp818 driver

2015-12-10T10:14:22+00:00

AXP818 is rsb based PMIC and used on Allwinner A83T H8 Homlet dev board.
It's registers are different and calculating reg config is different than
that of earlier axp power ICs.

DCDC1, DCDC2, DCDC3 and DCDC5 is implemented at the moment.
all other voltages can be added subsequently.
AXP datasheet is uploaded to wiki:
http://linux-sunxi.org/File:AXP818_datasheet_Revision1.0.pdf

Signed-off-by: Vishnu Patekar 
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede

dm: regulator: add max77686 regulator driver

2015-05-15T00:49:38+00:00

This commit adds support to MAX77686 regulator driver,
based on a driver model regulator's API. It implements
almost all regulator operations, beside those for setting
and geting the Current value.
For proper bind and operation it requires the MAX77686 PMIC driver.

New file: drivers/power/regulator/max77686.c
New config: CONFIG_DM_REGULATOR_MAX77686

Signed-off-by: Przemyslaw Marczak 
Acked-by: Simon Glass

power: Add AMS AS3722 PMIC support

2014-12-18T20:19:20+00:00

The AS3722 provides a number of DC/DC converters and LDOs as well as 8
GPIOs.

Signed-off-by: Thierry Reding 
Signed-off-by: Simon Glass 
Signed-off-by: Tom Warren