u-boot.git/drivers/phy/Kconfig, branch master Unnamed repository; edit this file 'description' to name the repository. phy: Add Amlogic AXG MIPI PCIe Analog PHY driver 2021-02-10T09:00:51+00:00 Neil Armstrong narmstrong@baylibre.com 2020-12-29T13:59:01+00:00 4547551aa019698524e809f81f65d5782f62bc1d The Amlogic AXG MIPI + PCIe Analog PHY provides function for both PCIe and MIPI DSI at the same time, and provides the Analog part of MIPI DSI transmission and Analog part of the PCIe lines. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 
The Amlogic AXG MIPI + PCIe Analog PHY provides function for both PCIe and
MIPI DSI at the same time, and provides the Analog part of MIPI DSI transmission
and Analog part of the PCIe lines.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
phy: Add Amlogic AXG MIPI D-PHY driver 2021-02-10T09:00:51+00:00 Neil Armstrong narmstrong@baylibre.com 2020-12-29T13:59:00+00:00 7ef19503bacf4681a7c8a3025ccbec0944a4b70b The Amlogic AXG SoCs embeds a MIPI D-PHY used to communicate with DSI panels. This D-PHY depends on a separate analog PHY. Signed-off-by:Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 
The Amlogic AXG SoCs embeds a MIPI D-PHY used to communicate with DSI
panels.

This D-PHY depends on a separate analog PHY.

Signed-off-by:Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
phy: dphy: Add configuration helpers 2021-02-10T09:00:51+00:00 Neil Armstrong narmstrong@baylibre.com 2020-12-29T13:58:58+00:00 afef20585abe55c44d376f3cacf435ddde149d77 The MIPI D-PHY spec defines default values and boundaries for most of the parameters it defines. Introduce helpers to help drivers get meaningful values based on their current parameters, and validate the boundaries of these parameters if needed. These helpers and header are taken from Linux commit 9123e3a74ec7 ("Linux 5.9-rc1"). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 
The MIPI D-PHY spec defines default values and boundaries for most of the
parameters it defines. Introduce helpers to help drivers get meaningful
values based on their current parameters, and validate the boundaries of
these parameters if needed.

These helpers and header are taken from Linux commit 9123e3a74ec7 ("Linux 5.9-rc1").

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
phy: add USB PHY driver for MediaTek MT7620 SoC 2021-01-24T20:39:26+00:00 Weijie Gao weijie.gao@mediatek.com 2020-11-12T08:36:48+00:00 b4f214f04477b07ef7033069f74efb8532db2518 This patch adds USB PHY driver for MediaTek MT7620 SoC Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> 
This patch adds USB PHY driver for MediaTek MT7620 SoC

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Merge tag 'u-boot-amlogic-20201005' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic 2020-10-06T12:36:10+00:00 Tom Rini trini@konsulko.com 2020-10-06T12:36:10+00:00 987ab49366f3fcd25039eab431bf099b587b3265 - generate unique mac address from SoC serial on S400 board - Add USB support for GXL and AXG SoCs - Update Gadget code to use the new GXL and AXG USB glue driver - Add a VIM3 board support to add dynamic PCIe enable in OS DT - Fix AXG pinmux with requesting GPIOs - Add missing GPIOA_18 for AXG pinctrl - Add Amlogic PWM driver 
- generate unique mac address from SoC serial on S400 board
- Add USB support for GXL and AXG SoCs
- Update Gadget code to use the new GXL and AXG USB glue driver
- Add a VIM3 board support to add dynamic PCIe enable in OS DT
- Fix AXG pinmux with requesting GPIOs
- Add missing GPIOA_18 for AXG pinctrl
- Add Amlogic PWM driver
phy: meson-gxl-usb: depend on Meson AXG aswell 2020-10-05T15:59:45+00:00 Neil Armstrong narmstrong@baylibre.com 2020-09-10T08:48:16+00:00 0ae8724d7e64f814fb77d2caef6214fc1bc52991 Enable build of meson-gxl-usb PHY for the AXG architecture aswell. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 
Enable build of meson-gxl-usb PHY for the AXG architecture aswell.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
phy: add support for stingray PAXB PHY controller 2020-09-30T20:48:18+00:00 Srinath Mannam srinath.mannam@broadcom.com 2020-04-02T10:38:12+00:00 3151fdd7f4ad0cdb14e3aa35eae9908efa0b572e Add support for stingray PAXB PHY controller driver. This driver supports maximum 8 PAXB phys using pipemux data. Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Stefan Roese <sr@denx.de> 
Add support for stingray PAXB PHY controller driver.
This driver supports maximum 8 PAXB phys using pipemux data.

Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Reviewed-by: Stefan Roese <sr@denx.de>
phy: add driver for Qualcomm IPQ40xx USB PHY 2020-09-18T20:20:47+00:00 Robert Marko robert.marko@sartura.hr 2020-09-10T14:00:04+00:00 dec042028e8aff9a4f12d1b2ae48a373ab4c4ff9 Add a driver to setup the USB PHY-s on Qualcomm IPQ40xx series SoCs. The driver sets up HS and SS phys. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> 
Add a driver to setup the USB PHY-s on Qualcomm IPQ40xx series SoCs.
The driver sets up HS and SS phys.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
phy: rockchip: Add Rockchip USB2PHY driver 2020-05-29T10:13:19+00:00 Jagan Teki jagan@amarulasolutions.com 2020-05-26T03:33:44+00:00 ac97a9ece14e930b0856b13d1d13d6b40763258e Add Rockchip USB2PHY driver with initial support. This will help to use it for EHCI controller in host mode, and USB 3.0 controller in otg mode. More functionality like charge, vbus detection will add it in future changes. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> 
Add Rockchip USB2PHY driver with initial support.

This will help to use it for EHCI controller in host
mode, and USB 3.0 controller in otg mode.

More functionality like charge, vbus detection will
add it in future changes.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
phy: meson: add GXBB PHY driver 2020-04-28T08:23:10+00:00 Beniamino Galvani b.galvani@gmail.com 2019-08-18T13:42:54+00:00 df42f321390411285dac3df603f6eb583d593481 This adds support for the USB PHY found on Amlogic GXBB SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 
This adds support for the USB PHY found on Amlogic GXBB SoCs.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>