u-boot.git/drivers/net, branch v2011.09-rc2 Unnamed repository; edit this file 'description' to name the repository. KS8695: convert KS8695 eth driver to CONFIG_MULTI_ETH 2011-09-10T14:10:34+00:00 Greg Ungerer greg.ungerer@opengear.com 2011-09-10T08:40:34+00:00 1e8ff7145c6be51f295d8e235472a6455aee1ac3 Trivial conversion of the ks8695eth driver to a CONFIG_MULTI_ETH type driver. Signed-off-by: Greg Ungerer <greg.ungerer@opengear.com> 
Trivial conversion of the ks8695eth driver to a CONFIG_MULTI_ETH type
driver.

Signed-off-by: Greg Ungerer <greg.ungerer@opengear.com>
phylib: remove a couple of redundant code lines 2011-09-09T22:08:26+00:00 Vladimir Zapolskiy vz@mleia.com 2011-09-05T07:24:08+00:00 041c542219af7f31c372d89b4c7c6f4c8064a8ce This change slightly improves readability of the phydev speed/duplex assignment logic. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Detlev Zundel <dzu@denx.de> 
This change slightly improves readability of the phydev speed/duplex
assignment logic.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Detlev Zundel <dzu@denx.de>
phylib: reset mii bus only if reset handler is registered 2011-09-09T22:07:55+00:00 Vladimir Zapolskiy vz@mleia.com 2011-09-05T07:24:07+00:00 e3a77218a256edbe201112a39beeed8adcabae3f This change allows to cope with a mii bus device registered using miiphy_register(), which doesn't assign a default reset handler. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Detlev Zundel <dzu@denx.de> 
This change allows to cope with a mii bus device registered using
miiphy_register(), which doesn't assign a default reset handler.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Detlev Zundel <dzu@denx.de>
smc911x: Fix build warnings 2011-09-09T21:57:24+00:00 Wolfgang Denk wd@denx.de 2011-09-08T01:04:27+00:00 24e1664472deef23abb3246da8573ddefc0c7971 Commit 6af1d41 "smc911x MII made available" was missing a few "const" qualifiers. Fix the resulting in build warnings: smc911x.c: In function 'smc911x_initialize': smc911x.c:297: warning: passing argument 2 of 'miiphy_register' from incompatible pointer type smc911x.c:297: warning: passing argument 3 of 'miiphy_register' from incompatible pointer type Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Helmut Raiger <helmut.raiger@hale.at> 
Commit 6af1d41 "smc911x MII made available" was missing a few "const"
qualifiers.  Fix the resulting in build warnings:

smc911x.c: In function 'smc911x_initialize':
smc911x.c:297: warning: passing argument 2 of 'miiphy_register' from incompatible pointer type
smc911x.c:297: warning: passing argument 3 of 'miiphy_register' from incompatible pointer type

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Helmut Raiger <helmut.raiger@hale.at>
smc911x MII made available 2011-09-07T21:49:58+00:00 Helmut Raiger helmut.raiger@hale.at 2011-06-29T00:12:14+00:00 6af1d41a46691ca67a8e79af12f07a22aa71680f The driver already had the MII functions, but they have not been registered using miiphy_register(). Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> 
The driver already had the MII functions, but they have not been
registered using miiphy_register().

Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
da850: fix the channel number for EMAC teardown init 2011-09-04T09:36:19+00:00 Nagabhushana Netagunte nagabhushana.netagunte@ti.com 2011-09-04T02:20:33+00:00 ba511f779a584f77b4b798fc40685bfe8d3d5163 TX and RX channel numbers programmed as '1' during EMAC teardown initialization is wrong. This patch fixes the same by setting channel number to '0' which is used by U-boot. Signed-off-by: Sugumar Natarajan <sugumar@ti.com> Signed-off-by: Nagabhushana Netagunte <nagabhushana.netagunte@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> 
TX and RX channel numbers programmed as '1' during EMAC
teardown initialization is wrong. This patch fixes the
same by setting channel number to '0' which is used by U-boot.

Signed-off-by: Sugumar Natarajan <sugumar@ti.com>
Signed-off-by: Nagabhushana Netagunte <nagabhushana.netagunte@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
phy.c: make less verbose - turn printf() into debug() 2011-08-31T20:35:27+00:00 Wolfgang Denk wd@denx.de 2011-07-24T21:39:10+00:00 b91a9d9d4dc81d8b62690b03546d92d27744e9b5 The PHY driver was too verbose and corrupted the boot message display like this: ... Net: TSEC0 connected to Marvell 88E1111S TSEC1 connected to Marvell 88E1111S TSEC0, TSEC1 ... Turn printf() into debug() so we het the expected output again: ... Net: TSEC0, TSEC1 ... Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> 
The PHY driver was too verbose and corrupted the boot message display
like this:

	...
	Net:   TSEC0 connected to Marvell 88E1111S
	TSEC1 connected to Marvell 88E1111S
	TSEC0, TSEC1
	...

Turn printf() into debug() so we het the expected output again:

	...
	Net:   TSEC0, TSEC1
	...

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kumar Gala <galak@kernel.crashing.org>
Add Ethernet hardware MAC address framework to usbnet 2011-08-08T19:05:23+00:00 Simon Glass sjg@chromium.org 2011-06-13T23:13:10+00:00 7616e7850804c7c69e0a22c179dfcba9e8f3f587 Built-in Ethernet adapters support setting the mac address by means of a ethaddr environment variable for each interface (ethaddr, eth1addr, eth2addr). This adds similar support to the USB network side, using the names usbethaddr, usbeth1addr, etc. They are kept separate since we don't want a USB device taking the MAC address of a built-in device or vice versa. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Eric Bénard <eric@eukrea.com> 
Built-in Ethernet adapters support setting the mac address by means of a
ethaddr environment variable for each interface (ethaddr, eth1addr, eth2addr).

This adds similar support to the USB network side, using the names
usbethaddr, usbeth1addr, etc. They are kept separate since we don't want
a USB device taking the MAC address of a built-in device or vice versa.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Eric Bénard <eric@eukrea.com>
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx 2011-08-02T19:52:21+00:00 Wolfgang Denk wd@denx.de 2011-08-02T19:52:21+00:00 0886eef9ba25b9e8da4bbaefc1a0b6da7a9567dc * 'master' of git://git.denx.de/u-boot-ppc4xx: net/4xx: Install interrupt handler after driver registration 
* 'master' of git://git.denx.de/u-boot-ppc4xx:
  net/4xx: Install interrupt handler after driver registration
cleanup: Fix typos and misspellings in various files. 2011-07-28T19:27:36+00:00 Mike Williams mike@mikebwilliams.com 2011-07-22T04:01:30+00:00 1626308797ac4184e73e56d275a1b8da11a62d5b Recieve/Receive recieve/receive Interupt/Interrupt interupt/interrupt Addres/Address addres/address Signed-off-by: Mike Williams <mike@mikebwilliams.com> 
Recieve/Receive
recieve/receive
Interupt/Interrupt
interupt/interrupt
Addres/Address
addres/address

Signed-off-by: Mike Williams <mike@mikebwilliams.com>