u-boot.git/drivers/net/Makefile, branch master Unnamed repository; edit this file 'description' to name the repository. net: Remove ne2000 driver 2021-05-25T16:40:16+00:00 Tom Rini trini@konsulko.com 2021-05-25T15:54:12+00:00 aee18604e2e7d9ff10a59b54d4a8386e164e2161 With the last user of this driver removed, remove the driver. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> 
With the last user of this driver removed, remove the driver.

Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
sandbox: Add a DSA sandbox driver and unit test 2021-04-15T08:52:17+00:00 Claudiu Manoil claudiu.manoil@nxp.com 2021-03-14T12:14:57+00:00 ff98da06674d47ff995edd068bcbd4ae6da69f00 The DSA sandbox driver is used for unit testing the DSA class code. It implements a simple 2 port switch plus 1 CPU port, and uses a very simple tag to identify the ports. The DSA sandbox device is connected via CPU port to a regular Ethernet sandbox device, called 'dsa-test-eth, managed by the existing eth sandbox driver. The 'dsa-test-eth' is not intended for testing the eth class code however, but it is used to emulate traffic through the 'lan0' and 'lan1' front pannel switch ports. To achieve this the dsa sandbox driver registers a tx handler for the 'dsa-test-eth' device. The switch ports, labeled as 'lan0' and 'lan1', are also registered as eth devices by the dsa class code this time. So pinging through these switch ports is as easy as: => setenv ethact lan0 => ping 1.2.3.5 Unit tests for the dsa class code were also added. The 'dsa_probe' test exercises most API functions from dsa.h. The 'dsa' unit test simply exercises ARP/ICMP traffic through the two switch ports, including tag injection and extraction, with the help of the dsa sandbox driver. I took care to minimize the impact on the existing eth unit tests, though some adjustments needed to be made with the addition of extra eth interfaces used by the dsa unit tests. The additional eth interfaces also require MAC addresses, these have been added to the sandbox default environment. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Message-Id: <20210216224804.3355044-5-olteanv@gmail.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> 
The DSA sandbox driver is used for unit testing the DSA class code.
It implements a simple 2 port switch plus 1 CPU port, and uses a
very simple tag to identify the ports.

The DSA sandbox device is connected via CPU port to a regular Ethernet
sandbox device, called 'dsa-test-eth, managed by the existing eth
sandbox driver.  The 'dsa-test-eth' is not intended for testing the
eth class code however, but it is used to emulate traffic through the
'lan0' and 'lan1' front pannel switch ports.  To achieve this the dsa
sandbox driver registers a tx handler for the 'dsa-test-eth' device.
The switch ports, labeled as 'lan0' and 'lan1', are also registered
as eth devices by the dsa class code this time.  So pinging through
these switch ports is as easy as:

=> setenv ethact lan0
=> ping 1.2.3.5

Unit tests for the dsa class code were also added.  The 'dsa_probe'
test exercises most API functions from dsa.h.  The 'dsa' unit test
simply exercises ARP/ICMP traffic through the two switch ports,
including tag injection and extraction, with the help of the dsa
sandbox driver.

I took care to minimize the impact on the existing eth unit tests,
though some adjustments needed to be made with the addition of
extra eth interfaces used by the dsa unit tests. The additional eth
interfaces also require MAC addresses, these have been added to the
sandbox default environment.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20210216224804.3355044-5-olteanv@gmail.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
net: designware: add Amlogic Meson8b & later glue driver 2021-04-06T09:10:29+00:00 Neil Armstrong narmstrong@baylibre.com 2021-02-24T19:33:56+00:00 798424e8573a6b642a1bb507d41c1f73e6736e2e This adds a proper glue driver for the Designware DWMAC ethernet MAC IP found in the Amlogic Meson8, GXBB, GXL, GXM, G12A, G12B & SM1 SoCs. This is aimed to replace the static ethernet link setup found on the board init code for the Amlogic SoC based boards. Tested on a libretech-cc (S905x Internal RMII 10/100 PHY) and Khadas VIM3 (A113d with external 10/100/1000 RGMII PHY) to cover the most extreme setups. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 
This adds a proper glue driver for the Designware DWMAC ethernet MAC IP
found in the Amlogic Meson8, GXBB, GXL, GXM, G12A, G12B & SM1 SoCs.

This is aimed to replace the static ethernet link setup found on the board
init code for the Amlogic SoC based boards.

Tested on a libretech-cc (S905x Internal RMII 10/100 PHY) and Khadas VIM3 (A113d
with external 10/100/1000 RGMII PHY) to cover the most extreme setups.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
net: add Amlogic Meson G12A MDIO MUX driver 2021-04-06T09:10:29+00:00 Neil Armstrong narmstrong@baylibre.com 2021-02-24T16:31:53+00:00 8120ce17bf66d1fd60b70959fdc4a759616b223b The Amlogic G12A & compatible SoCs embeds a mux to either communicate with the external PHY or the internal 10/100 PHY. This adds support for this mux as a MDIO MUX device. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> 
The Amlogic G12A & compatible SoCs embeds a mux to either communicate with
the external PHY or the internal 10/100 PHY.

This adds support for this mux as a MDIO MUX device.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
net: add MMIO Register MDIO MUX driver 2021-04-06T09:10:29+00:00 Neil Armstrong narmstrong@baylibre.com 2021-02-24T14:02:23+00:00 6c7bc9fec01f9883660dfb9e04cf29ea5abb3123 Add support for MMIO register MDIO muxes based on the Linux mdio-mux-mmioreg driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> 
Add support for MMIO register MDIO muxes based on the Linux mdio-mux-mmioreg driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
sh: Remove r7780mp board 2021-02-15T15:16:23+00:00 Tom Rini trini@konsulko.com 2021-02-10T17:51:22+00:00 215386e48c84bdd2a29bf9d22150f462954e9e8d This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Patch-cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Patch-cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Tom Rini <trini@konsulko.com> 
This board has not been converted to CONFIG_DM by the deadline of v2020.01
and is missing other conversions which depend on this as well.  Remove it.

Patch-cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Patch-cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs 2021-01-27T15:47:44+00:00 Aaron Tseng aaron.tseng@cortina-access.com 2021-01-14T21:34:11+00:00 febe13b438b3b02f0629f91f36928f3f300c7372 Add Cortina Access Ethernet device driver for CAxxxx SoCs. This driver supports both legacy and DM_ETH network models. Signed-off-by: Aaron Tseng <aaron.tseng@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> Signed-off-by: Abbie Chang <abbie.chang@cortina-access.com> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Abbie Chang <abbie.chang@Cortina-Access.com> CC: Tom Rini <trini@konsulko.com> 
Add Cortina Access Ethernet device driver for CAxxxx SoCs.
This driver supports both legacy and DM_ETH network models.

Signed-off-by: Aaron Tseng <aaron.tseng@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
Signed-off-by: Abbie Chang <abbie.chang@cortina-access.com>

CC: Joe Hershberger <joe.hershberger@ni.com>
CC: Abbie Chang <abbie.chang@Cortina-Access.com>
CC: Tom Rini <trini@konsulko.com>
net: add ethernet driver for MediaTek MT7620 SoC 2021-01-24T20:39:27+00:00 Weijie Gao weijie.gao@mediatek.com 2020-11-12T08:36:53+00:00 17ade70b6a65a4c83d698b6a6c7b33f45a4382a0 This patch adds ethernet driver for MediaTek MT7620 SoC. The MT7620 SoC has a built-in ethernet (Frame Engine) and a built-in 7-port switch and two xMII interfaces (can be MII/RMII/RGMII). The port 0-3 of the switch connects to intergrited FE PHYs. Port 4 can be configured to connect to either the intergrited FE PHY, or the xMII. Port 5 always connects to the xMII. Port 6 is the CPU port. This driver supports MT7530 giga switch connects to port 5. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> 
This patch adds  ethernet driver for MediaTek MT7620 SoC.

The MT7620 SoC has a built-in ethernet (Frame Engine) and a built-in
7-port switch and two xMII interfaces (can be MII/RMII/RGMII).

The port 0-3 of the switch connects to intergrited FE PHYs. Port 4 can be
configured to connect to either the intergrited FE PHY, or the xMII.
Port 5 always connects to the xMII. Port 6 is the CPU port.

This driver supports MT7530 giga switch connects to port 5.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
net: Add IPQ40xx MDIO driver 2020-10-22T13:54:54+00:00 Robert Marko robert.marko@sartura.hr 2020-10-08T20:05:11+00:00 975151d056acef155643bdb57b29a1a28ba5590f This adds the driver for the IPQ40xx built-in MDIO. This will be needed to support future PHY driver. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> 
This adds the driver for the IPQ40xx built-in MDIO.
This will be needed to support future PHY driver.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
net: Add NIC controller driver for OcteonTX2 2020-10-14T05:55:56+00:00 Suneel Garapati sgarapati@marvell.com 2020-08-26T12:37:42+00:00 4684a7a43ad4c911bc810c243b2c58947c548fc5 Adds support for Network Interface controllers found on OcteonTX2 SoC platforms. Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> 
Adds support for Network Interface controllers found on
OcteonTX2 SoC platforms.

Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>