u-boot.git/drivers/misc, branch v2009.08-rc2

OMAP3 Move twl4030 power and led functions

2009-07-29T07:57:30+00:00

Because twl4030 now has its own device files, move exiting
omap3 power_init_r to a new location.

power_init_r is the only function in board/omap3/common.
It initializes the twl4030 power for the board and enables
the led.

The power part of the the function is moved to twl4030_power_init in
drivers/power/twl4030.c The power compilation is conditional on the
existing config variable CONFIG_TWL4030_POWER.

The led part is moved to twl4030_led_init in the new file
drivers/misc/twl4030_led.c  The led compilation is conditional on
the new config variable CONFIG_TWL4030_LED

The directory board/omap3/common was removed because power_init_r
was the only function in it.

Signed-off-by: Tom Rix 
Acked-by: Jean-Christophe PLAGNIOL-VILLARD 
Acked-by: Heiko Schocher

General help message cleanup

2009-06-12T18:47:16+00:00

Many of the help messages were not really helpful; for example, many
commands that take no arguments would not print a correct synopsis
line, but "No additional help available." which is not exactly wrong,
but not helpful either.

Commit ``Make "usage" messages more helpful.'' changed this
partially. But it also became clear that lots of "Usage" and "Help"
messages (fields "usage" and "help" in struct cmd_tbl_s respective)
were actually redundant.

This patch cleans this up - for example:

Before:
	=> help dtt
	dtt - Digital Thermometer and Thermostat

	Usage:
	dtt         - Read temperature from digital thermometer and thermostat.

After:
	=> help dtt
	dtt - Read temperature from Digital Thermometer and Thermostat

	Usage:
	dtt

Signed-off-by: Wolfgang Denk

fsl_law: Fix bug in calculation of LAW sizing

2009-04-04T15:21:40+00:00

In set_ddr_laws() when we determined how much of the size requested
to be mapped was covered by the the first LAW we needed to recalculate
the size based on what was actually mapped.

Signed-off-by: Kumar Gala

MPC85xx: Add MPC8569 CPU support

2009-03-30T18:33:51+00:00

There is a workaround for MPC8569 CPU Errata, which needs to set Bit 13 of
LBCR in 4K bootpage. We setup a temp TLB for eLBC controller in bootpage,
then invalidate it after LBCR bit 13 is set.

Signed-off-by: Haiying Wang 
Signed-off-by: Kumar Gala

Move ali512x.h

2009-03-20T21:39:13+00:00

Moved ali512x.h from include/asm-i386/ic/ to /include

Signed-off-by: Graeme Russ

mpc85xx: Add support for the P2020

2009-02-17T00:05:55+00:00

Added various p2020 processor specific details:
* SVR for p2020, p2020E
* immap updates for LAWs and DDR on p2020
* LAW defines related to p2020

Signed-off-by: Srikanth Srinivasan 
Signed-off-by: Travis Wheatley 
Signed-off-by: Kumar Gala

Command usage cleanup

2009-01-28T07:49:52+00:00

Remove command name from all command "usage" fields and update
common/command.c to display "name - usage" instead of
just "usage". Also remove newlines from command usage fields.

Signed-off-by: Peter Tyser

Standardize command usage messages with cmd_usage()

2009-01-28T07:43:45+00:00

Signed-off-by: Peter Tyser

Add support for Maxim's DS4510 I2C device

2009-01-24T00:47:50+00:00

Initial support for the DS4510, a CPU supervisor with
integrated EEPROM, SRAM, and 4 programmable non-volatile
GPIO pins. The CONFIG_DS4510 define enables support
for the device while the CONFIG_CMD_DS4510 define
enables the ds4510 command. The additional
CONFIG_DS4510_INFO, CONFIG_DS4510_MEM, and
CONFIG_DS4510_RST defines add additional sub-commands
to the ds4510 command when defined.

Signed-off-by: Peter Tyser

fsl_law clear enable before changing.

2008-10-18T19:54:05+00:00

Debug sessions may have left enabled laws.
Changing lawbar with an unkown enabled tgtid could cause problems.

Signed-off-by: Ed Swarthout