u-boot.git/drivers/block, branch v2011.06

mvsata: issue hard reset on initialization

2011-05-23T06:58:32+00:00

Before the actual initialization do a hard reset of the SATA port and the
connected device.

changes v1->v2:
 - add comment for udelay

Signed-off-by: Michael Walle 
Cc: Prafulla Wadaskar 
Cc: Albert Aribaud

ftide020: add faraday ide ahb controller

2011-05-12T21:41:44+00:00

Faraday's ftide020_s is an IDE-AHB controller for SoC design.
This patch add the u-boot driver (PIO) of ftide020 ATA (IDE) driver.
IDE commands include read, info, and other functions has been implemented.

Because this IDE controller support AHB interface only which is differ
from other most IDE controller supports PCI interface. Some registers
access is required during CMD/DATA I/O. Hence a configuration
"CONFIG_IDE_AHB" is required to be defined according to the feature in
cmd_ide.c.

Signed-off-by: Macpaul Lin

Replace obsolete e-mail address

2011-04-27T17:38:09+00:00

Signed-off-by: Albert ARIBAUD

MXC: removed warnings from IMX51 ATA driver

2011-02-01T23:54:43+00:00

Drop warnings due to unused variables.

Signed-off-by: Stefano Babic 
CC: Marek Vasut 
Acked-by: Marek Vasut

BLOCK: Add freescale IMX51 PATA driver

2011-02-01T23:54:42+00:00

Signed-off-by: Marek Vasut 
Acked-by: Stefano Babic 
Acked-by: Wolfgang Denk

Switch from archive libraries to partial linking

2010-11-17T20:02:18+00:00

Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils.  As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".

This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.

The name of each former library archive is preserved except for
extensions which change from ".a" to ".o".  This commit updates
references accordingly where needed, in particular in some linker
scripts.

This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols.  Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

Signed-off-by: Sebastien Carlier

mvsata_ide: adjust port init sequence

2010-10-13T07:35:54+00:00

mvsata_ide_initialize_port(): adjust init sequence (SStatus
should be checked only after all writes to SControl) and
return success/failure to ide_preinit().

Also, as some tests showed init durations in the hundreds
of us, raise the time-out to 01 ms to be on the safe side.

Signed-off-by: Albert Aribaud

ide: add mvsata_ide driver

2010-08-07T23:47:06+00:00

This driver only provides initialization code; actual driving
is done by cmd_ide.c using the ATA compatibility mode of the
Marvell SATAHC controller.

Signed-off-by: Albert Aribaud

ide: reorder object files alphabetically

2010-08-07T23:47:05+00:00

Signed-off-by: Albert Aribaud

Blackfin: pata_bfin: convert to portmux framework

2010-07-13T21:50:49+00:00

Rather than bang MMRs directly, use the new portmux framework to handle
the details.

Signed-off-by: Mike Frysinger