u-boot.git/doc, branch v2009.08-rc2

sbc8349: combine HRCW flash and u-boot image flash

2009-07-27T23:35:53+00:00

Up to this point in time, the sbc8349 board was storing the u-boot
image in flash 2x.  One for the HRCW value at the beginning of
flash (0xff80_0000), and once close to the end of flash (0xfff8_0000)
for the actual image that got executed.

This moves the TEXT_BASE to be the beginning of flash, which makes
the second copy of the image redundant, and frees up the flash
from the end of the environment storage to the end of the flash
device itself.

Signed-off-by: Paul Gortmaker 
Signed-off-by: Kim Phillips

Prepare 2009.08-rc1

2009-07-26T22:24:55+00:00

Update CHANGELOG, minor coding style fix.

Signed-off-by: Wolfgang Denk

new video driver for bus vcxk framebuffers

2009-07-26T11:17:21+00:00

This patch adds a new video driver

* adds common bus_vcxk framebuffer driver

Signed-off-by: Jens Scharsig 
[agust@denx.de: fixed lots of style issues before applying]
Signed-off-by: Anatolij Gustschin

Coding Style cleanup; update CHANGELOG.

2009-07-23T20:23:23+00:00

Signed-off-by: Wolfgang Denk

Add DNS support

2009-07-23T05:53:44+00:00

On 04 Oct 2008 Pieter posted a dns implementation for U-Boot.

http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg10216.html
>
> DNS can be enabled by setting CFG_CMD_DNS. After performing a query,
> the serverip environment var is updated.
>
> Probably there are some cosmetic issues with the patch. Unfortunatly I
> do not have the time to correct these. So if anybody else likes DNS
> support in U-Boot and has the time, feel free to patch it in the main tree.

Here it is again - slightly modified & smaller:
  - update to 2009-06 (Pieter's patch was for U-Boot 1.2.0)
  - README.dns is added
  - syntax is changed (now takes a third option, the env var to store
    the result in)
  - add a random port() function in net.c
  - sort Makefile in ./net/Makefile
  - dns just returns unless a env var is given
  - run through checkpatch, and clean up style issues
  - remove packet from stack
  - cleaned up some comments
  - failure returns much faster (if server responds, don't wait for
    timeout)
  - use built in functions (memcpy) rather than byte copy.

Signed-off-by: Robin Getz 
Signed-off-by: Pieter Voorthuijsen 
Signed-off-by: Ben Warren

Remove legacy NAND and disk on chip code.

2009-07-17T00:07:47+00:00

Legacy NAND had been scheduled for removal.  Any boards that use this
were already not building in the previous release due to an #error.

The disk on chip code in common/cmd_doc.c relies on legacy NAND,
and it has also been removed.  There is newer disk on chip code
in drivers/mtd/nand; someone with access to hardware and sufficient
time and motivation can try to get that working, but for now disk
on chip is not supported.

Signed-off-by: Scott Wood

Merge branch 'master' of /home/wd/git/u-boot/master

2009-07-13T22:00:04+00:00

Merge branch 'master' of git://git.denx.de/u-boot-arm

2009-07-13T21:45:02+00:00

at91: Introduction of at91sam9g10 SOC.

2009-07-12T15:56:11+00:00

AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
faster clock speed: 266/133MHz.

Signed-off-by: Sedji Gaouaou

at91: Introduction of at91sam9g45 SOC.

2009-07-12T15:43:34+00:00

AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz.
It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of
peripherals.

The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES.
On the board you can find 2 USART, USB high speed,
a 480*272 LG lcd, ethernet, gpio/joystick/buttons.

Signed-off-by: Sedji Gaouaou