u-boot.git/doc/device-tree-bindings/serial, branch master

msm_serial: Read bit rate register value from DT

2020-07-29T12:43:40+00:00

IPQ40xx and currently supported Snapdragon boards don't use the same one
so enable reading it from DT, if no DT property is found default value
is the same as the previous define.

Signed-off-by: Robert Marko 
Reviewed-By: Ramon Fried

m68k: add basic set of devicetrees

2019-05-24T03:14:38+00:00

This patch adds a basic group of devicetrees, one for each
cpu family, including actually just uart and dspi devices,
since these are the drivers supporting devicetree (support
added in this patch-set).

Acked-by: Jagan Teki 
Signed-off-by: Angelo Dureghello 
Reviewed-by: Jagan Teki

serial: pl01x: expose skip_init platdata option in DT

2016-11-29T01:09:47+00:00

To be able to represent the skip-init platdata element with OF_CONTROL,
it needs to be read from the device tree as well and put into the platform data.

Cc: Eric Anholt 
Signed-off-by: Fabian Vogt 
Reviewed-by: Simon Glass

serial: bcm283x_mu: add device tree support

2016-11-29T01:09:46+00:00

This patch adds device tree support for the bcm283x mini-uart driver.

Signed-off-by: Fabian Vogt 
Reviewed-by: Simon Glass

dm: imx: serial: support device tree

2016-10-07T10:26:14+00:00

Support instatiation through device tree. Also parse the fsl,dte-mode
property to determine whether DTE mode shall be used.

Signed-off-by: Stefan Agner 
Reviewed-by: Simon Glass

serial_sh: Add standrad SCI (w/o FIFO) support

2016-07-08T20:51:57+00:00

Add support for standard type SCI (without FIFO) port.

Signed-off-by: Yoshinori Sato 
Signed-off-by: Nobuhiro Iwamatsu

serial_sh: Device Tree support

2016-07-08T20:51:57+00:00

Add Device Tree bindings.

Signed-off-by: Yoshinori Sato 
Signed-off-by: Nobuhiro Iwamatsu

drivers: serial: add serial driver for ar933x SOC

2016-05-20T23:25:50+00:00

This patch add support for ar933x serial.

Signed-off-by: Wills Wang 
Reviewed-by: Thomas Chou 
Reviewed-by: Daniel Schwierzeck 
Reviewed-by: Simon Glass

armv8: LS2080A: Consolidate LS2080A and LS2085A

2016-04-06T17:26:46+00:00

LS2080A is the primary SoC, and LS2085A is a personality with AIOP
and DPAA DDR. The RDB and QDS boards support both personality. By
detecting the SVR at runtime, a single image per board can support
both SoCs. It gives users flexibility to swtich SoC without the need
to reprogram the board.

Signed-off-by: York Sun 
CC: Prabhakar Kushwaha 
Reviewed-by: Prabhakar Kushwaha

serial: Add support for Qualcomm serial port

2016-04-01T21:18:07+00:00

This driver works in "new" Data Mover UART mode, so
will be compatible with modern Qualcomm chips only.

Signed-off-by: Mateusz Kulikowski 
Reviewed-by: Simon Glass 
Tested-by: Simon Glass