u-boot.git/board/st/common, branch master

stm32mp: stm32prog: Add CONFIG_CMD_STM32PROG_SERIAL and _USB

2021-03-11T16:41:17+00:00

Add CONFIG_CMD_STM32PROG_SERIAL and CONFIG_CMD_STM32PROG_USB to
independently select the support of UART or USB communication for
STM32CubeProgrammer.

For serial boot over UART, user can deactivate CONFIG_CMD_STM32PROG_SERIAL
to use U-Boot console of binary loaded by UART (for board bring-up for
example).

Signed-off-by: Patrick Delaunay 
Reviewed-by: Patrice Chotard

board: st: remove the nand MTD configuration for NOR boot in stm32mp1 board

2021-03-11T16:40:28+00:00

Since commit d5d726d3cc47 ("configs: stm32mp1: only support SD card after
NOR in bootcmd_stm32mp"), the stm32mp1 boards only support SD card after
NOR boot device, so the MTD partitions for nand0 or spi-nand0 are useless
(no need of "UBI" partition in nand0 or spi-nand0).

This patch removes these nand MTD update for nor boot and simplify nand0
and spi-nand0 support (remove the mtd_boot variable).

Signed-off-by: Patrick Delaunay 
Signed-off-by: Patrick Delaunay 
Reviewed-by: Patrice Chotard

Correct U-Boot upstream repository

2021-02-28T18:57:30+00:00

The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git
effective 2021-02-28.

Signed-off-by: Heinrich Schuchardt

common: Drop asm/global_data.h from common header

2021-02-02T20:33:42+00:00

Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include  at all, so
remove that include.

Signed-off-by: Simon Glass 
Signed-off-by: Tom Rini

MAINTAINERS: Update STi and STM32 maintainers emails in remaining files

2021-01-13T08:52:58+00:00

A previous series already update STMicroelectronics emails maintainers
but some files have been omitted (Makefile, .dts, .dtsi and .rst files).
Update Patrick and my email address with the one dedicated to upstream
activities.

Signed-off-by: Patrice Chotard 
Reviewed-by: Patrick Delaunay

board: st: common: migrate trace to dev and log macro

2021-01-13T08:52:58+00:00

Change pr_* to dev_ or log_ macro and define LOG_CATEGORY.

Signed-off-by: Patrick Delaunay 
Reviewed-by: Patrice Chotard

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

2021-01-05T19:26:35+00:00

In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass

board: stm32mp1: use IS_ENABLED to prevent ifdef in set_dfu_alt_inf

2020-08-13T07:52:49+00:00

Use CONFIG_IS_ENABLED to prevent ifdef in set_dfu_alt_inf.

Signed-off-by: Patrick Delaunay 
Reviewed-by: Patrice Chotard

sf: Drop dm.h header file from spi_flash.h

2020-08-04T02:19:54+00:00

This header file should not be included in other header files. Remove it
and use a forward declaration instead.

Signed-off-by: Simon Glass

board: st: move type-c stusb1600 controller code in a driver

2020-07-07T14:01:23+00:00

Migrate the ST Microelectronics STUSB160X Type-C controller code in
a generic I2C driver in st/common, based on Linux one in :
drivers/usb/typec/stusb160x.c

This patch simplifies the stm32mp1 board code and allows to reuse
this STUSB160X driver in other boards.

Signed-off-by: Patrick Delaunay 
Reviewed-by: Patrice Chotard