u-boot.git/board/qca, branch master

common: Drop init.h from common header

2020-05-18T21:33:33+00:00

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass

mips: add initial support for qca956x referenced board

2019-04-12T15:32:50+00:00

QCA9563 is CPU used on AP152 board :

    Clock speed : 750 MHz ,
    Arch :  Mips 74Kc,
    Eth : SGMII interface,
    MIMO config : 3 * 3 450M,
    2 * USB 2.0,

Signed-off-by: Rosy Song 

Changes for v2:
   - coding style cleanup
   - remove ununsed flash chip in defconfig
   - enable automatic icache / dcache size in defconfig

Changes for v3:
   - add detailed information for qca956x in commit message

Changes for v4:
   - remove pre-configured network settings in ap152.h

Changes for v5:
   - coding style cleanup

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR

2018-04-27T18:54:48+00:00

We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini

MIPS: QCA AP143: remove debug_uart_init call

2017-05-10T14:16:09+00:00

In order to add a generic MIPS debug_uart_init call right before the call to
board_early_init_f, we need to remove all calls to debug_uart_init from every
MIPS boards.

Signed-off-by: Álvaro Fernández Rojas

MIPS: QCA AP121: remove debug_uart_init call

2017-05-10T14:16:09+00:00

In order to add a generic MIPS debug_uart_init call right before the call to
board_early_init_f, we need to remove all calls to debug_uart_init from every
MIPS boards.

Signed-off-by: Álvaro Fernández Rojas

mips: ath79: ap143: Reset ethernet on boot

2016-05-31T08:17:54+00:00

This patch reset the ethernet controller for ap143 board

Signed-off-by: Wills Wang

mips: ath79: ap121: Enable ethernet

2016-05-31T08:17:54+00:00

This patch enable network function for ap121 board.

Signed-off-by: Wills Wang 
Acked-by: Marek Vasut

MIPS: Split I & D cache line size config

2016-05-31T07:44:24+00:00

Allow L1 Icache & L1 Dcache line size to be specified separately, since
there's no architectural mandate that they be the same. The
[id]cache_line_size functions are tidied up to take advantage of the
fact that the Kconfig entries are always present to simply check them
for zero rather than needing to #ifdef on their presence.

Signed-off-by: Paul Burton 
[removed CONFIG_SYS_CACHELINE_SIZE in include/configs/pic32mzdask.h]
Signed-off-by: Daniel Schwierzeck

MIPS: Move cache sizes to Kconfig

2016-05-31T07:44:24+00:00

Move details of the L1 cache line sizes & total sizes into Kconfig,
defaulting to 0. A new CONFIG_SYS_CACHE_SIZE_AUTO Kconfig entry is
introduced to allow platforms to select auto-detection of cache sizes,
and it defaults to being enabled if none of the cache sizes are set by
the configuration (ie. sizes are all the default 0), and code is
adjusted to #ifdef on that rather than on the definition of the sizes
(which will always be defined even if 0).

Signed-off-by: Paul Burton