u-boot.git/board/elgin, branch master

common: Drop asm/global_data.h from common header

2021-02-02T20:33:42+00:00

Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include  at all, so
remove that include.

Signed-off-by: Simon Glass 
Signed-off-by: Tom Rini

rockchip: rv1108: use correct API for board callback

2020-09-16T08:31:17+00:00

Use board_early_init_f() instead of mach_cpu_init() for board, the
board_early_init_f() is used for board init and after dm_initf, while
the mach_cpu_init() is used for CPU/SOC and before dm_initf()(not able
to use syscon API).

Fixes: 9cec336708 ("rockchip: evb-rv1108: Use syscon API to get grf base")
Fixes: 4aa33690fc {"rockchip: elgin-rv1108: Use syscon API to get grf base")

Signed-off-by: Kever Yang

common: Drop init.h from common header

2020-05-18T21:33:33+00:00

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass

elgin-rv1108: Use rk_board_late_init() for GPIO settings

2020-03-26T14:58:46+00:00

Since commit 8e9a8d0d0c8c ("rockchip: elgin-rv1108: use board_early_init_f
for per-boar init") the function that configure the board GPIOs is no
longer called since CONFIG_BOARD_EARLY_INIT_F=y is not selected.

These GPIOs do not need to be configured in such early stagem, so change it
to rk_board_late_init() and also select CONFIG_BOARD_LATE_INIT=y
to fix the regression.

Signed-off-by: Otavio Salvador 
Signed-off-by: Fabio Berton 
Reviewed-by: Kever Yang

rockchip: elgin-rv1108: Use syscon API to get grf base

2020-03-26T14:58:46+00:00

Use syscon API to get grf base instead of get from dts.

Signed-off-by: Kever Yang 
Reviewed-by: Simon Glass 
Acked-by: Otavio Salvador

rockchip: rv1108: Migrate to use common board file

2019-07-29T02:27:48+00:00

Use common board file for board_init() and board_late_init(),
for Rockchip SoCs have very similar process.

Signed-off-by: Kever Yang

rockchip: elgin-rv1108: use board_early_init_f for per-boar init

2019-07-29T02:27:48+00:00

Use board_early_init_f() for per-board init operation and
use board_init() from common board file.

Signed-off-by: Kever Yang

rockchip: use 'arch-rockchip' as header file path

2019-04-30T22:00:05+00:00

Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common
header file path, so that we can get the correct path directly.

Signed-off-by: Kever Yang 
Reviewed-by: Philipp Tomsich

ARM: rockchip: Add rv1108-elgin-r1 board support

2018-12-16T00:30:11+00:00

Add the initial support for Elgin R1 board, which is based on the
RV1108 SoC and has the following features currently supported in
U-Boot:

- UART
- eMMC
- USB

Signed-off-by: Otavio Salvador 
Reviewed-by: Philipp Tomsich