u-boot.git/arch, branch v2011.09-rc2 Unnamed repository; edit this file 'description' to name the repository. ppc4xx: Flush dcache after DDR2 autocalibration with caches on 2011-09-19T09:51:21+00:00 Stefan Roese sr@denx.de 2011-09-16T10:54:58+00:00 226502e01bc7ffa79dde28604075949f8f816cfc Flush the dcache before removing the TLB with caches enabled. Otherwise this might lead to problems later on, e.g. while booting Linux (as seen on ICON-440SPe). Signed-off-by: Stefan Roese <sr@denx.de> 
Flush the dcache before removing the TLB with caches enabled.
Otherwise this might lead to problems later on, e.g. while booting
Linux (as seen on ICON-440SPe).

Signed-off-by: Stefan Roese <sr@denx.de>
Fix incorrect array size of phy settings for 405EX 2011-09-19T09:51:21+00:00 Weirich, Bernhard Bernhard.Weirich@riedel.net 2011-09-08T16:27:38+00:00 25fb02abdf7af37b3b9f83891115ee94e9073708 Change bd_t->bi_phy* arrays from 1 to 2 for PPC405EX since 405EX has 2 ethernet interfaces. Signed-off-by: Bernhard Weirich <bernhard.weirich@riedel.net> Signed-off-by: Stefan Roese <sr@denx.de> 
Change bd_t->bi_phy* arrays from 1 to 2 for PPC405EX since
405EX has 2 ethernet interfaces.

Signed-off-by: Bernhard Weirich <bernhard.weirich@riedel.net>
Signed-off-by: Stefan Roese <sr@denx.de>
led: remove camel casing of led identifiers globally 2011-09-13T06:30:52+00:00 Jason Kridner jkridner@beagleboard.org 2011-09-04T18:40:16+00:00 2d3be7c456f9d0bcfd4d4b0515aecd32d6a06037 Result of running the following command to address Wolfgang's comment about camel case: for file in `find . | grep '\.[chS]$'`; do perl -i -pe 's/(green|yellow|red|blue)_LED_(on|off)/$1_led_$2/g' $file; done Discussion: http://patchwork.ozlabs.org/patch/84988/ Signed-off-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Joel A Fernandes <agnel.joel@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> 
Result of running the following command to address Wolfgang's
comment about camel case:

for file in `find . | grep '\.[chS]$'`; do perl -i -pe
's/(green|yellow|red|blue)_LED_(on|off)/$1_led_$2/g' $file; done

Discussion:
http://patchwork.ozlabs.org/patch/84988/

Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Joel A Fernandes <agnel.joel@gmail.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
omap4: IO settings 2011-09-13T06:25:16+00:00 Aneesh V aneesh@ti.com 2011-09-08T15:05:56+00:00 4ecfcfaa9ed1bb2ee73585752f9c36a12d1600c6 Tuning some IO settings for better performance and power. And consolidate all such IO settings at one place. Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> 
Tuning some IO settings for better performance and power.
And consolidate all such IO settings at one place.

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
omap4: make SDRAM init work for ES1.0 silicon 2011-09-13T06:25:15+00:00 Aneesh V aneesh@ti.com 2011-09-08T15:05:53+00:00 025bc4254ba3d501cf2af49ae1d91d5b2e7c529d SDRAM init was not working on ES1.0 due to a programming error. A pointer that was passed by value to a function was set in function emif_get_device_details(), but the effect wouldn't be seen in the calling function. The issue came out while testing for ES1.0 because ES1.0 doesn't have any SDRAM chips connected to CS1 Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> 
SDRAM init was not working on ES1.0 due to a programming
error. A pointer that was passed by value to a function
was set in function emif_get_device_details(), but the effect
wouldn't be seen in the calling function. The issue came
out while testing for ES1.0 because ES1.0 doesn't have any
SDRAM chips connected to CS1

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
omap: gpio: generic changes after changing API 2011-09-13T06:25:15+00:00 Sanjeev Premi premi@ti.com 2011-09-08T14:48:39+00:00 3b690ebbbf21303a3bac1f62d967c36cd8655ce0 This patch contains the generic changes required after change to generic API in the previous patch. Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> 
This patch contains the generic changes required after
change to generic API in the previous patch.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
omap: gpio: Use generic API 2011-09-13T06:25:15+00:00 Sanjeev Premi premi@ti.com 2011-09-08T14:47:25+00:00 81bdc155c72ef9e093b388b90c58d8134d870976 Convert all OMAP specific functions to use the common API definitions in include/asm/gpio.h. In the process, made few additional changes: - Use -EINVAL consistently. -1 was used in many places. - Removed one-liner static functions that were used only once. Replaced the content as necessary. - Combines implementation of functions omap_get_gpio_dataout() and omap_get_gpio_datain(). To do so, new static function _get_gpio_direction() was added. Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> 
Convert all OMAP specific functions to use the common API
definitions in include/asm/gpio.h. In the process, made
few additional changes:
 - Use -EINVAL consistently. -1 was used in many places.
 - Removed one-liner static functions that were used only
   once. Replaced the content as necessary.
 - Combines implementation of functions omap_get_gpio_dataout()
   and omap_get_gpio_datain(). To do so, new static function
   _get_gpio_direction() was added.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
ARMV7: OMAP3: Add 37xx ESx revision numbers. 2011-09-12T15:40:48+00:00 Howard D. Gray howard.gray@matrix-vision.de 2011-09-04T18:11:17+00:00 32b58ce736f3195e937c1c4de7074315ef55c2fa OMAP3: Add 37xx ESx revision numbers. Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Signed-off-by: Howard D. Gray <howard.gray@matrix-vision.de> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> 
OMAP3: Add 37xx ESx revision numbers.

Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
Signed-off-by: Howard D. Gray <howard.gray@matrix-vision.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
OMAP: Add function to get state of a GPIO output 2011-09-12T15:40:48+00:00 Joel A Fernandes agnel.joel@gmail.com 2011-09-04T16:10:03+00:00 569919d8e284c36d4ee981df5fcaa2e188f006a0 Read directly from OMAP_GPIO_DATAOUT to get the output state of the GPIO pin Signed-off-by: Joel A Fernandes <agnel.joel@gmail.com> Signed-off-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> 
Read directly from OMAP_GPIO_DATAOUT to get the output state of the GPIO pin

Signed-off-by: Joel A Fernandes <agnel.joel@gmail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Minor coding style cleanup. 2011-09-11T19:24:09+00:00 Wolfgang Denk wd@denx.de 2011-09-11T19:24:09+00:00 04e5ae793153e74d682f2d0e297e58fd75366c8f Signed-off-by: Wolfgang Denk <wd@denx.de> 
Signed-off-by: Wolfgang Denk <wd@denx.de>