This patch adds support for all OcteonTX2 96xx/95xx
boards from Marvell.
For 96xx boards, use octeontx_96xx_defconfig and
for 95xx boards, use octeontx_95xx_defconfig.

Signed-off-by: Suneel Garapati <sgarapati@marvell.com>

This patch adds support for all OcteonTX 81xx/83xx
boards from Marvell.
For 81xx boards, use octeontx_81xx_defconfig and
for 83xx boards, use octeontx_83xx_defconfig.

Signed-off-by: Suneel Garapati <sgarapati@marvell.com>

Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- SPL not supported yet --> no spl-directory in arch/arm/mach-nexell.
  Appropriate line in Makefile removed.
- clock.c: 'section(".data")' added to declaration of clk_periphs[] and
  core_hz.
- Kconfig: Changes to have a structure like in mach-bcm283x/Kconfig,
  e.g. "config ..." entries moved from other Kconfig.
- timer.c: 'section(".data")' added to declaration of timestamp and
  lastdec.
- arch/arm/mach-nexell/serial.c removed because this is for the UARTs
  of the S5P6818 SoC which is not supported yet. S5P4418 UARTs are
  different, here the (existing) PL011-code is used.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where
  possible (and similar).

Signed-off-by: Stefan Bosch <stefan_b@posteo.net>

This introduces initial support for the popular Qualcomm
IPQ40x8 and IPQ40x9 WiSoC series.

IPQ40xx series have 4x Cortex A7 ARM-v7A cores.
Supported are: IPQ4018, IPQ4019, IPQ4028 and IPQ4029.

IPQ40x8 and IPQ40x9 use the same cores, but differ in
addressable RAM size (1GB for IPQ40x9 and 256MB for IPQ40x8)
and supported peripherals (IPQ40x8 lacks RGMII, LCD controller
and EMMC/SDHCI controllers).

IQP4028/IPQ4029 models differ from IPQ4018/IPQ4019 only
by their rated temperatures rates with IPQ402X models being
rated for wider temperature ranges.

Initially this supports:
* Simple clock driver (Only for UART1 now, will be extended)
* Pinctrl driver (Supports UARTX and GPIO now, will be extended)
* GPIOs already supported by msm_gpio driver with updates
* UARTs already supported by serial_msm driver with updates

Further peripherals will come in later patches.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>

Have this symbol follow the pattern of all other such symbols.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>

Have this symbol follow the pattern of all other such symbols.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>

Have this symbol follow the pattern of all other such symbols.
This patch also removes a TODO from the code.

Reviewed-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>

Have this symbol follow the pattern of all other such symbols.
This patch removes a TODO from the code.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>

The comment immediately above the block of machine directory names implored
users to keep the macro names sorted, but, alas, this is no longer the case.

Put the list of machine directory names back in alphanumerical order by
CONFIG_* macro name, as the comment asks. Sort all the symbols as though they
all followed the convention of having the string "ARCH_" in the middle of
their definitions.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>

Following the example of most other SoCs in arch/$(ARCH)/cpu/$(CPU)/$(SOC)
move the lpc32xx code from arch/arm/cpu/arm926ejs/lpc32xx to
arch/arm/mach-lpc32xx.

Following the checklist from
commit 01f14456306c ("ARM: prepare for moving SoC sources into mach-*"):

    [1] move files from arch/arm/cpu/arm926ejs/lpc32xx to arch/arm/mach-lpx32xx
    [2] add machine entry to arch/arm/Makefile
    [3] remove "obj-y += ..." from arch/arm/cpu/arm926ejs/Makefile
    [4] fix the Kconfig file path in arch/arm/Kconfig
    [5] (no MAINTAINERS update)

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>