u-boot.git/README, branch v2009.08-rc2

Save server's MAC address in environment

2009-07-23T06:17:01+00:00

Linux's netconsole works much better when you can pass it the MAC address of
the server. (otherwise it just uses broadcast, which everyone else on my
network complains about :)

This sets the env var "serveraddr" (to match ethaddr), so that you can pass
it to linux with whatever bootargs you want to....

addnetconsole=set bootargs $(bootargs) netconsole=@$(ipaddr)/eth0,@$(serverip)/$(serveraddr)

Signed-of-by: Robin Getz 

Signed-off-by: Ben Warren

Merge branch 'master' of git://git.denx.de/u-boot-nand-flash

2009-07-18T22:38:23+00:00

Added support for splash screen positioning

2009-07-17T13:23:41+00:00

This patch adds support splash image positioning by adding an
additional variable "splashpos" to the environment. Please see
README for details.

Signed-off-by: Matthias Weisser 
Acked-by: Matthias Fuchs 
Signed-off-by: Anatolij Gustschin

Remove legacy NAND and disk on chip code.

2009-07-17T00:07:47+00:00

Legacy NAND had been scheduled for removal.  Any boards that use this
were already not building in the previous release due to an #error.

The disk on chip code in common/cmd_doc.c relies on legacy NAND,
and it has also been removed.  There is newer disk on chip code
in drivers/mtd/nand; someone with access to hardware and sufficient
time and motivation can try to get that working, but for now disk
on chip is not supported.

Signed-off-by: Scott Wood

Improve U-Boot Porting Guide in the README

2009-07-16T19:45:51+00:00

Update for...
* BDI2000 -> BDI3000 (BDI2000 is obsolete).
* Add a line to read the doc/README.* files
* Fix coding standard violations

Signed-off-by: Gerald Van Baren

nand_spl: read environment early, when booting from NAND using nand_spl

2009-07-07T22:58:07+00:00

Currently, when booting from NAND using nand_spl, in the beginning the default
environment is used until later in boot process the dynamic environment is read
out. This way environment variables that must be interpreted early, like the
baudrate or "silent", cannot be modified dynamically and remain at their
default values. Fix this problem by reading out main and redundand (if used)
copies of the environment in the nand_spl code.

Signed-off-by: Guennadi Liakhovetski 
Signed-off-by: Scott Wood

ARM1136: Introduce CONFIG_PRELOADER macro.

2009-06-21T14:18:12+00:00

Currently CONFIG_ONENAND_IPL is used in a number of #ifdef's
in start.S. In preparation for adding support for NAND SPL
the macro CONFIG_PRELOADER is introducted and replaces the
CONFIG_ONENAND_IPL in start.S.

Signed-off-by: Magnus Lilja

mtd: Introduce CONFIG_MTD_DEVICE to select compilation of mtdcore.o

2009-06-12T18:45:47+00:00

This new define enables mtdcore.c compilation and with this we can
select the MTD device infrastructure needed for the reworked mtdparts
command.

We now have the 2 MTD infrastructure defines, CONFIG_MTD_DEVICE and
CONFIG_MTD_PARTITIONS. CONFIG_MTD_DEVICE is needed (as explained above)
for the "mtdparts" command and CONFIG_MTD_PARTITIONS is needed for UBI.

Signed-off-by: Stefan Roese 
Cc: Scott Wood

i2c: Update references to individual i2c commands

2009-06-12T18:39:46+00:00

The individual i2c commands imd, imm, inm, imw, icrc32, iprobe, iloop,
and isdram are no longer available so all references to them have been
updated to the new form of "i2c ".

Signed-off-by: Peter Tyser

i2c: Remove deprecated individual i2c commands

2009-06-12T18:39:46+00:00

The following individual I2C commands have been removed: imd, imm, inm,
imw, icrc32, iprobe, iloop, isdram.

The functionality of the individual commands is still available via
the 'i2c' command.

This change only has an impact on those boards which did not have
CONFIG_I2C_CMD_TREE defined.

Signed-off-by: Peter Tyser