# # rescue.py - anaconda rescue mode setup # # Mike Fulbright # Jeremy Katz # # Copyright 2001-2004 Red Hat, Inc. # # This software may be freely redistributed under the terms of the GNU # library public license. # # You should have received a copy of the GNU Library Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. # import upgrade from snack import * from constants_text import * from text import WaitWindow, OkCancelWindow, ProgressWindow, stepToClasses from flags import flags import sys import os import isys import iutil import fsset import shutil import time from rhpl.translate import _ import logging log = logging.getLogger("anaconda") class RescueInterface: def waitWindow(self, title, text): return WaitWindow(self.screen, title, text) def progressWindow(self, title, text, total): return ProgressWindow(self.screen, title, text, total) def messageWindow(self, title, text, type = "ok", default = None, custom_icon=None, custom_buttons=[]): if type == "ok": ButtonChoiceWindow(self.screen, title, text, buttons=[TEXT_OK_BUTTON]) elif type == "yesno": if default and default == "no": btnlist = [TEXT_NO_BUTTON, TEXT_YES_BUTTON] else: btnlist = [TEXT_YES_BUTTON, TEXT_NO_BUTTON] rc = ButtonChoiceWindow(self.screen, title, text, buttons=btnlist) if rc == "yes": return 1 else: return 0 elif type == "custom": tmpbut = [] for but in custom_buttons: tmpbut.append(string.replace(but,"_","")) rc = ButtonChoiceWindow(self.screen, title, text, width=60, buttons=tmpbut) idx = 0 for b in tmpbut: if string.lower(b) == rc: return idx idx = idx + 1 return 0 else: return OkCancelWindow(self.screen, title, text) def __init__(self, screen): self.screen = screen # XXX grub-install is stupid and uses df output to figure out # things when installing grub. make /etc/mtab be at least # moderately useful. def makeMtab(instPath, theFsset): child = os.fork() if (not child): os.chroot(instPath) f = open("/etc/mtab", "w+") f.write(theFsset.mtab()) f.close() os._exit(0) # make sure they have a resolv.conf in the chroot def makeResolvConf(instPath): if not os.access("/etc/resolv.conf", os.R_OK): return if os.access("%s/etc/resolv.conf" %(instPath,), os.R_OK): f = open("%s/etc/resolv.conf" %(instPath,), "r") buf = f.read() f.close() else: buf = "" # already have a nameserver line, don't worry about it if buf.find("nameserver") != -1: return f = open("/etc/resolv.conf", "r") buf = f.read() f.close() # no nameserver, we can't do much about it if buf.find("nameserver") == -1: return shutil.copyfile("%s/etc/resolv.conf" %(instPath,), "%s/etc/resolv.conf.bak" %(instPath,)) f = open("%s/etc/resolv.conf" %(instPath,), "w+") f.write(buf) f.close() # XXX # probably belongs somewhere else # def methodUsesNetworking(methodstr): for m in ['http://', 'ftp://', 'nfs:/', 'nfsiso:/']: if methodstr.startswith(m): return 1 return 0 # # Write out something useful for networking and start interfaces # def startNetworking(network, intf): # do lo first try: os.system("/usr/sbin/ifconfig lo 127.0.0.1") except: log.error("Error trying to start lo in rescue.py::startNetworking()") # start up dhcp interfaces first dhcpGotNS = 0 devs = network.netdevices.keys() devs.sort() for devname in devs: dev = network.netdevices[devname] waitwin = intf.waitWindow(_("Starting Interface"), _("Attempting to start %s") % (dev.get('device'),)) log.info("Attempting to start %s", dev.get('device')) if dev.get('bootproto').lower() == "dhcp": try: ns = isys.dhcpNetDevice(dev) if ns: if not dhcpGotNS: dhcpGotNS = 1 f = open("/etc/resolv.conf", "w") f.write("nameserver %s\n" % ns) f.close() except: log.error("Error trying to start %s in rescue.py::startNetworking()", dev.get('device')) else: try: isys.configNetDevice(dev, network.gateway) except: log.error("Error trying to start %s in rescue.py::startNetworking()", dev.get('device')) waitwin.pop() # write out resolv.conf if dhcp didn't get us one if not dhcpGotNS: f = open("/etc/resolv.conf", "w") if network.domains != ['localdomain'] and network.domains: f.write("search %s\n" % (string.joinfields(network.domains, ' '),)) for ns in network.nameservers(): if ns: f.write("nameserver %s\n" % (ns,)) f.close() def runShell(screen = None, msg=""): if screen: screen.suspend() print if msg: print (msg) print _("When finished please exit from the shell and your " "system will reboot.") print if os.path.exists("/bin/sh"): iutil.execConsole() else: print "Unable to find /bin/sh to execute! Not starting shell" time.sleep(5) if screen: screen.finish() def runRescue(anaconda, instClass): for file in [ "services", "protocols", "group", "joe", "man.config", "nsswitch.conf", "selinux", "mke2fs.conf" ]: try: os.symlink('/mnt/runtime/etc/' + file, '/etc/' + file) except: pass # see if they would like networking enabled if not methodUsesNetworking(anaconda.id.methodstr): screen = SnackScreen() while 1: rc = ButtonChoiceWindow(screen, _("Setup Networking"), _("Do you want to start the network interfaces on " "this system?"), [_("Yes"), _("No")]) if rc != string.lower(_("No")): anaconda.intf = RescueInterface(screen) # need to call sequence of screens, have to look in text.py # # this code is based on main loop in text.py, and if it # or the network step in dispatch.py change significantly # then this will certainly break pyfile = "network_text" classNames = ("NetworkDeviceWindow", "NetworkGlobalWindow") lastrc = INSTALL_OK step = 0 anaconda.dir = 1 while 1: s = "from %s import %s; nextWindow = %s" % \ (pyfile, classNames[step], classNames[step]) exec s win = nextWindow() rc = win(screen, anaconda, showonboot = 0) if rc == INSTALL_NOOP: rc = lastrc if rc == INSTALL_BACK: step = step - 1 anaconda.dir = - 1 elif rc == INSTALL_OK: step = step + 1 anaconda.dir = 1 lastrc = rc if step == -1: ButtonChoiceWindow(screen, _("Cancelled"), _("I can't go to the previous step " "from here. You will have to try " "again."), buttons=[_("OK")]) anaconda.dir = 1 step = 0 elif step >= len(classNames): break startNetworking(anaconda.id.network, anaconda.intf) break else: break screen.finish() # Early shell access with no disk access attempts if not anaconda.rescue_mount: runShell() sys.exit(0) screen = SnackScreen() anaconda.intf = RescueInterface(screen) anaconda.setMethod(instClass) # prompt to see if we should try and find root filesystem and mount # everything in /etc/fstab on that root rc = ButtonChoiceWindow(screen, _("Rescue"), _("The rescue environment will now attempt to find your " "Linux installation and mount it under the directory " "%s. You can then make any changes required to your " "system. If you want to proceed with this step choose " "'Continue'. You can also choose to mount your file systems " "read-only instead of read-write by choosing 'Read-Only'." "\n\n" "If for some reason this process fails you can choose 'Skip' " "and this step will be skipped and you will go directly to a " "command shell.\n\n") % (anaconda.rootPath,), [_("Continue"), _("Read-Only"), _("Skip")] ) if rc == string.lower(_("Skip")): runShell(screen) sys.exit(0) elif rc == string.lower(_("Read-Only")): readOnly = 1 else: readOnly = 0 disks = upgrade.findExistingRoots(anaconda, upgradeany = 1) if not disks: root = None elif len(disks) == 1: root = disks[0] else: height = min (len (disks), 12) if height == 12: scroll = 1 else: scroll = 0 partList = [] for (drive, fs, relstr, label) in disks: if label: partList.append("%s (%s)" % (drive, label)) else: partList.append(drive) (button, choice) = \ ListboxChoiceWindow(screen, _("System to Rescue"), _("What partition holds the root partition " "of your installation?"), partList, [ _("OK"), _("Exit") ], width = 30, scroll = scroll, height = height, help = "multipleroot") if button == string.lower (_("Exit")): root = None else: root = disks[choice] rootmounted = 0 if root: try: fs = fsset.FileSystemSet() # only pass first two parts of tuple for root, since third # element is a comment we dont want rc = upgrade.mountRootPartition(anaconda, root[:2], fs, allowDirty = 1, warnDirty = 1, readOnly = readOnly) if rc == -1: ButtonChoiceWindow(screen, _("Rescue"), _("Your system had dirty file systems which you chose not " "to mount. Press return to get a shell from which " "you can fsck and mount your partitions. The system " "will reboot automatically when you exit from the " "shell."), [_("OK")], width = 50) rootmounted = 0 else: ButtonChoiceWindow(screen, _("Rescue"), _("Your system has been mounted under %s.\n\n" "Press to get a shell. If you would like to " "make your system the root environment, run the command:\n\n" "\tchroot %s\n\nThe system will reboot " "automatically when you exit from the shell.") % (anaconda.rootPath, anaconda.rootPath), [_("OK")] ) rootmounted = 1 # now turn on swap if not readOnly: try: fs.turnOnSwap("/") except: log.error("Error enabling swap") # now that dev is udev, bind mount the installer dev there isys.mount("/dev", "%s/dev" %(anaconda.rootPath,), bindMount = 1) # and /dev/pts isys.mount("/dev/pts", "%s/dev/pts" %(anaconda.rootPath,), bindMount = 1) # and /selinux too if flags.selinux and os.path.isdir("%s/selinux" %(anaconda.rootPath,)): try: isys.mount("/selinux", "%s/selinux" %(anaconda.rootPath,), "selinuxfs") except Exception, e: log.error("error mounting selinuxfs: %s" %(e,)) # set a library path to use mounted fs os.environ["LD_LIBRARY_PATH"] = "/lib:/usr/lib:/usr/X11R6/lib:/lib:/mnt/usr/lib:/mnt/sysimage/lib:/mnt/sysimage/usr/lib:/mnt/sysimage/usr/X11R6/lib" # get man pages to work, add chrooted support. os.environ["MANPATH"] = "/mnt/sysimage/usr/share/man:/mnt/sysimage/usr/local/share/man:/usr/share/man:/usr/local/share/man" # find groff data dir try: glst = os.listdir("/mnt/sysimage/usr/share/groff") # find a directory which is a numeral, its where # data files are gversion = None for gdir in glst: try: isone = 1 for idx in range(0, len(gdir)): if string.find(string.digits + '.', gdir[idx]) == -1: isone = 0 break if isone: gversion = gdir break except: gversion = None continue except: gversion = None if gversion is not None: gpath = "/mnt/sysimage/usr/share/groff/"+gversion os.environ["GROFF_FONT_PATH"] = gpath + '/font' os.environ["GROFF_TMAC_PATH"] = "%s:/mnt/sysimage/usr/share/groff/site-tmac" % (gpath + '/tmac',) # do we have bash? try: if os.access("/usr/bin/bash", os.R_OK): os.symlink ("/usr/bin/bash", "/bin/bash") except: pass except: # This looks horrible, but all it does is catch every exception, # and reraise those in the tuple check. This lets programming # errors raise exceptions, while any runtime error will # still result in a shell (exc, val) = sys.exc_info()[0:2] log.error(str(exc)+": "+str(val)) if exc in (IndexError, ValueError, SyntaxError): raise exc, val, sys.exc_info()[2] ButtonChoiceWindow(screen, _("Rescue"), _("An error occurred trying to mount some or all of your " "system. Some of it may be mounted under %s.\n\n" "Press to get a shell. The system will reboot " "automatically when you exit from the shell.") % (anaconda.rootPath,), [_("OK")] ) else: ButtonChoiceWindow(screen, _("Rescue Mode"), _("You don't have any Linux partitions. Press " "return to get a shell. The system will reboot " "automatically when you exit from the shell."), [ _("OK") ], width = 50) msgStr = "" if rootmounted and not readOnly: makeMtab(anaconda.rootPath, fs) try: makeResolvConf(anaconda.rootPath) except Exception, e: log.error("error making a resolv.conf: %s" %(e,)) msgStr = _("Your system is mounted under the %s directory.") % (anaconda.rootPath,) runShell(screen, msgStr) sys.exit(0)