# Yuriy Syrota # Volodymyr M. Lisivka # Leon Kanter # Maxim Dziumanenko , 2003-2006 msgid "" msgstr "" "Project-Id-Version: 1.0\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2007-07-02 15:15-0400\n" "PO-Revision-Date: 2007-03-28 09:49+0200\n" "Last-Translator: Maxim Dziumanenko \n" "Language-Team: Ukrainian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../anaconda:262 msgid "Unknown Error" msgstr "Невідома помилка" #: ../anaconda:265 #, c-format msgid "Error pulling second part of kickstart config: %s!" msgstr "Помилка при читанні другої частини конфігурації kickstart: %s!" #: ../anaconda:279 ../cmdline.py:70 ../gui.py:960 ../text.py:403 #, c-format, python-format msgid "" "The following error was found while parsing your kickstart configuration:\n" "\n" "%s" msgstr "" "При аналізі kickstart-файлу виявлено наступну помилку:\n" "\n" "%s" #: ../anaconda:391 msgid "Press for a shell" msgstr "Натисніть для переходу у командну оболонку" #: ../anaconda:406 ../gui.py:237 ../rescue.py:260 ../rescue.py:334 #: ../rescue.py:361 ../rescue.py:371 ../rescue.py:450 ../rescue.py:456 #: ../text.py:443 ../text.py:602 ../vnc.py:146 ../textw/confirm_text.py:26 #: ../textw/confirm_text.py:54 ../textw/constants_text.py:36 #: ../textw/network_text.py:39 ../textw/network_text.py:49 #: ../textw/network_text.py:71 ../textw/network_text.py:77 #: ../textw/network_text.py:225 ../textw/network_text.py:812 #: ../textw/network_text.py:820 ../loader2/cdinstall.c:140 #: ../loader2/cdinstall.c:141 ../loader2/cdinstall.c:258 #: ../loader2/cdinstall.c:261 ../loader2/cdinstall.c:382 #: ../loader2/cdinstall.c:387 ../loader2/cdinstall.c:392 #: ../loader2/cdinstall.c:463 ../loader2/dirbrowser.c:139 #: ../loader2/driverdisk.c:93 ../loader2/driverdisk.c:281 #: ../loader2/driverdisk.c:312 ../loader2/driverdisk.c:346 #: ../loader2/driverdisk.c:384 ../loader2/driverdisk.c:398 #: ../loader2/driverdisk.c:412 ../loader2/driverdisk.c:422 #: ../loader2/driverdisk.c:583 ../loader2/driverdisk.c:620 #: ../loader2/driverselect.c:70 ../loader2/driverselect.c:205 #: ../loader2/hdinstall.c:106 ../loader2/hdinstall.c:157 #: ../loader2/hdinstall.c:319 ../loader2/hdinstall.c:369 #: ../loader2/hdinstall.c:404 ../loader2/hdinstall.c:474 #: ../loader2/hdinstall.c:517 ../loader2/hdinstall.c:530 ../loader2/kbd.c:131 #: ../loader2/kickstart.c:127 ../loader2/kickstart.c:137 #: ../loader2/kickstart.c:180 ../loader2/kickstart.c:279 #: ../loader2/kickstart.c:366 ../loader2/kickstart.c:523 ../loader2/lang.c:106 #: ../loader2/lang.c:369 ../loader2/loader.c:316 ../loader2/loader.c:342 #: ../loader2/loader.c:355 ../loader2/loader.c:366 ../loader2/loader.c:852 #: ../loader2/loader.c:1016 ../loader2/mediacheck.c:329 #: ../loader2/mediacheck.c:387 ../loader2/mediacheck.c:432 #: ../loader2/method.c:157 ../loader2/method.c:375 ../loader2/method.c:449 #: ../loader2/modules.c:1036 ../loader2/modules.c:1049 ../loader2/net.c:272 #: ../loader2/net.c:311 ../loader2/net.c:739 ../loader2/net.c:1064 #: ../loader2/net.c:1597 ../loader2/net.c:1620 ../loader2/net.c:1806 #: ../loader2/nfsinstall.c:57 ../loader2/nfsinstall.c:125 #: ../loader2/nfsinstall.c:205 ../loader2/nfsinstall.c:213 #: ../loader2/nfsinstall.c:251 ../loader2/telnetd.c:87 #: ../loader2/urlinstall.c:68 ../loader2/urlinstall.c:91 #: ../loader2/urlinstall.c:142 ../loader2/urlinstall.c:155 #: ../loader2/urlinstall.c:464 ../loader2/urlinstall.c:473 #: ../loader2/urlinstall.c:484 ../loader2/urls.c:282 ../loader2/urls.c:347 #: ../loader2/urls.c:352 ../loader2/urls.c:358 ../loader2/urls.c:470 msgid "OK" msgstr "Гаразд" #: ../anaconda:413 msgid "" "You do not have enough RAM to use the graphical installer. Starting text " "mode." msgstr "" "Недостатньо оперативної пам'яті для графічної програми встановлення. " "Встановлення продовжуватиметься у текстовому режимі." #: ../anaconda:429 msgid "No video hardware found, assuming headless" msgstr "Не знайдено відеокарту, вона вважатиметься відсутньою" #: ../anaconda:436 ../anaconda:897 msgid "Unable to instantiate a X hardware state object." msgstr "Не вдається ініціалізувати об'єкт стану обладнання системи X." #: ../anaconda:493 msgid "Starting graphical installation..." msgstr "Запускається графічне встановлення..." #: ../anaconda:754 msgid "Install class forcing text mode installation" msgstr "Перехід до встановлення у текстовому режимі" #: ../anaconda:794 msgid "Graphical installation not available... Starting text mode." msgstr "Графічне встановлення неможливе... Запускається текстове встановлення." #: ../anaconda:802 msgid "DISPLAY variable not set. Starting text mode!" msgstr "Змінна DISPLAY не встановлена. Запускається текстове встановлення!" #: ../anaconda:863 msgid "Unknown install method" msgstr "Невідомий метод встановлення" #: ../anaconda:864 msgid "You have specified an install method which isn't supported by anaconda." msgstr "Ви вказали метод встановлення, який не підтримується anaconda." #: ../anaconda:866 #, c-format msgid "unknown install method: %s" msgstr "невідомий метод встановлення: %s" #: ../autopart.py:955 #, python-format msgid "" "Could not allocate cylinder-based partitions as primary partitions.\n" "\n" "%s" msgstr "" "Не вдається розподілити як первинні розділи, основані на циліндрах\n" "\n" "%s" #: ../autopart.py:960 #, python-format msgid "" "Could not allocate partitions as primary partitions.\n" "\n" "%s" msgstr "" "Не вдається розподілити розділи як первинні розділи.\n" "\n" "%s" #: ../autopart.py:965 #, python-format msgid "" "Could not allocate cylinder-based partitions.\n" "\n" "%s" msgstr "" "Не вдається розподілити розділи на основі циліндрів.\n" "\n" "%s" #: ../autopart.py:1025 #, python-format msgid "" "Boot partition %s doesn't belong to a BSD disk label. SRM won't be able to " "boot from this partition. Use a partition belonging to a BSD disk label or " "change this device disk label to BSD." msgstr "" "Завантажувальний розділ %s не належить до позначки диску BSD. SRM не зможе " "завантажуватись з цього диску. Використовуйте розділ, який пов'язаний з " "позначкою диску BSD, або змініть позначку диску цього пристрою на BSD." #: ../autopart.py:1027 #, python-format msgid "" "Boot partition %s doesn't belong to a disk with enough free space at its " "beginning for the bootloader to live on. Make sure that there's at least 5MB " "of free space at the beginning of the disk that contains /boot" msgstr "" "Диск, на якому розташований завантажувальний розділ %s, не має достатньо " "вільного простору для встановлення початкового завантажувача. Перевірте, що " "на початку диску, який містить /boot, є принаймні 5МБ вільного простору." #: ../autopart.py:1029 #, python-format msgid "" "Boot partition %s isn't a VFAT partition. EFI won't be able to boot from " "this partition." msgstr "" "Завантажувальний розділ %s не є розділом VFAT. EFI не зможе завантажуватись " "з цього розділу." #: ../autopart.py:1031 msgid "" "The boot partition must entirely be in the first 4GB of the disk. " "OpenFirmware won't be able to boot this installation." msgstr "" "Завантажувальний розділ повинен розташовуватись у перших 4Гб. OpenFirmware " "не зможе завантажуватись з цього розділу." #: ../autopart.py:1038 #, python-format msgid "" "Boot partition %s may not meet booting constraints for your architecture." msgstr "" "Завантажувальний розділ %s може не задовольняти вимоги завантажувача вашої " "архітектури." #: ../autopart.py:1064 #, python-format msgid "" "Adding this partition would not leave enough disk space for already " "allocated logical volumes in %s." msgstr "" "Додавання цього розділу не залишить місця для вже розподілених логічних " "томів на %s." #: ../autopart.py:1259 msgid "Requested Partition Does Not Exist" msgstr "Запитаний розділ не існує" #: ../autopart.py:1260 #, python-format msgid "" "Unable to locate partition %s to use for %s.\n" "\n" "Press 'OK' to exit the installer." msgstr "" "Не вдається знайти розділ %s для %s.\n" "\n" "Натисніть \"Гаразд\" для переривання встановлення." #: ../autopart.py:1287 msgid "Requested Raid Device Does Not Exist" msgstr "Запитаний пристрій RAID не існує" #: ../autopart.py:1288 #, python-format msgid "" "Unable to locate raid device %s to use for %s.\n" "\n" "Press 'OK' to exit the installer." msgstr "" "Не вдається знайти пристрій RAID %s для %s.\n" "\n" "Натисніть \"Гаразд\" для переривання встановлення." #: ../autopart.py:1319 msgid "Requested Volume Group Does Not Exist" msgstr "Запитана група томів не існує" #: ../autopart.py:1320 #, python-format msgid "" "Unable to locate volume group %s to use for %s.\n" "\n" "Press 'OK' to exit the installer." msgstr "" "Не вдається знайти групу томів %s для %s.\n" "\n" "Натисніть \"Гаразд\" для переривання встановлення." #: ../autopart.py:1357 msgid "Requested Logical Volume Does Not Exist" msgstr "Запитаний логічний том не існує" #: ../autopart.py:1358 #, python-format msgid "" "Unable to locate logical volume %s to use for %s.\n" "\n" "Press 'OK' to exit the installer." msgstr "" "Не вдається знайти логічний том %s для %s.\n" "\n" "Натисніть \"Гаразд\" для переривання встановлення." #: ../autopart.py:1484 ../autopart.py:1531 msgid "Automatic Partitioning Errors" msgstr "Помилки автоматичного розподілу" #: ../autopart.py:1485 #, python-format msgid "" "The following errors occurred with your partitioning:\n" "\n" "%s\n" "\n" "Press 'OK' to exit the installer." msgstr "" "Вибраний варіант розподілу призвів до виникнення помилок:\n" "\n" "%s\n" "\n" "Натисніть \"Гаразд\" для переривання встановлення." #: ../autopart.py:1495 msgid "Warnings During Automatic Partitioning" msgstr "Попередження при автоматичному розподілі" #: ../autopart.py:1496 #, python-format msgid "" "Following warnings occurred during automatic partitioning:\n" "\n" "%s" msgstr "" "При автоматичному розподілі були наступні попередження:\n" "\n" "%s" #: ../autopart.py:1510 ../autopart.py:1527 msgid "" "\n" "\n" "Press 'OK' to exit the installer." msgstr "" "\n" "\n" "Натисніть \"Гаразд\" для переривання встановлення." #: ../autopart.py:1511 ../iw/partition_gui.py:997 #: ../textw/partition_text.py:239 msgid "Error Partitioning" msgstr "Помилка розподілу" #: ../autopart.py:1512 #, python-format msgid "" "Could not allocate requested partitions: \n" "\n" "%s.%s" msgstr "" "Не вдається розмістити запитані розділи: \n" "\n" "%s.%s" #: ../autopart.py:1529 msgid "" "\n" "\n" "Press 'OK' to choose a different partitioning option." msgstr "" "\n" "\n" "Натисніть 'Гаразд', щоб вибрати інший варіант розподілу." #: ../autopart.py:1532 #, python-format msgid "" "The following errors occurred with your partitioning:\n" "\n" "%s\n" "\n" "This can happen if there is not enough space on your hard drive(s) for the " "installation. %s" msgstr "" "Вибраний розподіл призвів до виникнення наступних помилок:\n" "\n" "%s\n" "\n" "Можлива причина помилки - недостатньо простору на жорстких дисках для " "встановлення.%s" #: ../autopart.py:1543 msgid "Unrecoverable Error" msgstr "Критична помилка" #: ../autopart.py:1544 msgid "Your system will now be rebooted." msgstr "Вашу систему зараз буде перезавантажено." #: ../autopart.py:1691 ../bootloader.py:197 ../image.py:442 #: ../partedUtils.py:304 ../partedUtils.py:334 ../partedUtils.py:1075 #: ../partedUtils.py:1124 ../partedUtils.py:1167 ../upgrade.py:348 #: ../yuminstall.py:1205 ../iw/blpasswidget.py:145 #: ../iw/bootloader_advanced_gui.py:41 ../iw/task_gui.py:89 #: ../iw/upgrade_swap_gui.py:188 ../iw/upgrade_swap_gui.py:196 #: ../iw/upgrade_swap_gui.py:203 ../textw/bootloader_text.py:123 #: ../textw/bootloader_text.py:448 ../textw/partition_text.py:243 #: ../textw/upgrade_text.py:172 ../loader2/loader.c:411 msgid "Warning" msgstr "Увага" #: ../autopart.py:1697 msgid "" "Automatic Partitioning sets partitions based on the selected installation " "type. You also can customize the partitions once they have been created.\n" "\n" "The manual disk partitioning tool, Disk Druid, allows you to create " "partitions in an interactive environment. You can set the file system types, " "mount points, partition sizes, and more." msgstr "" "Автоматичний розподіл виконується ґрунтуючись на основі обраного вами типу " "встановлення. Ви можете змінити змінити розподіл відповідно до ваших " "потреб.\n" "\n" "Засіб ручного розподілу диску, Disk Druid, дозволяє підготувати розділи в " "інтерактивному середовищі. Ви можете встановити типи файлових систем, точки " "монтування, та інше." #: ../autopart.py:1708 msgid "" "Before automatic partitioning can be set up by the installation program, you " "must choose how to use the space on your hard drives." msgstr "" "Перед тим, як програма встановлення виконає автоматичний розподіл, ви маєте " "вказати як використовувати простір на жорстких дисках." #: ../autopart.py:1713 msgid "Remove all partitions on this system" msgstr "Видалити всі розділи в цій системі" #: ../autopart.py:1714 msgid "Remove all Linux partitions on this system" msgstr "Видалити всі розділи Linux в цій системі" #: ../autopart.py:1715 msgid "Keep all partitions and use existing free space" msgstr "Зберегти всі розділи та використати вільний простір" #: ../autopart.py:1717 #, python-format msgid "" "You have chosen to remove all partitions (ALL DATA) on the following drives:%" "s\n" "Are you sure you want to do this?" msgstr "" "Ви вибрали видалення всіх розділів (ВСІХ ДАНИХ) на таких пристроях:%s\n" "Ви впевнені, що бажаєте видалити всі розділи?" #: ../autopart.py:1721 #, python-format msgid "" "You have chosen to remove all Linux partitions (and ALL DATA on them) on the " "following drives:%s\n" "Are you sure you want to do this?" msgstr "" "Ви вибрали видалення всіх розділів Linux (і ВСІХ ДАНИХ на них) на таких " "пристроях:%s\n" "Ви дійсно бажаєте видалити всі розділи Linux?" #: ../backend.py:113 #, python-format msgid "Upgrading %s\n" msgstr "Оновлення %s\n" #: ../backend.py:115 #, python-format msgid "Installing %s\n" msgstr "Встановлення %s\n" #: ../bootloader.py:129 msgid "Bootloader" msgstr "Завантажувач" #: ../bootloader.py:129 msgid "Installing bootloader..." msgstr "Встановлення завантажувача..." #: ../bootloader.py:198 msgid "" "No kernel packages were installed on your system. Your boot loader " "configuration will not be changed." msgstr "" "У вашій системі не встановлений жоден пакет з ядром Linux. Конфігурація " "завантажувача не буде змінена." #: ../cmdline.py:45 msgid "Completed" msgstr "Завершено" #: ../cmdline.py:53 msgid "In progress... " msgstr "Триває обробка... " #: ../cmdline.py:82 msgid "Can't have a question in command line mode!" msgstr "У режимі командного рядка питання не підтримуються!" #: ../cmdline.py:101 msgid "Parted exceptions can't be handled in command line mode!" msgstr "Виключні ситуації parted не обробляються у режимі командного рядка!" #: ../constants.py:65 #, python-format msgid "" "An unhandled exception has occurred. This is most likely a bug. Please " "save a copy of the detailed exception and file a bug report against anaconda " "at %s" msgstr "" "Виникла необроблена виключна ситуація. Можливо, це помилка в програмі. Будь " "ласка, збережіть повний текст цього виключення та складіть докладний звіт " "про помилку в anaconda на %s" #: ../exception.py:412 ../exception.py:429 msgid "Dump Written" msgstr "Дамп записано" #: ../exception.py:413 msgid "" "Your system's state has been successfully written to the floppy. The " "installer will now exit." msgstr "" "Стан вашої системи було успішно записано на дискету. Систему буде перезавантажено." #: ../exception.py:416 ../exception.py:433 ../fsset.py:1457 ../fsset.py:1742 #: ../fsset.py:2440 ../fsset.py:2447 ../gui.py:965 ../gui.py:1114 #: ../image.py:452 ../livecd.py:356 ../upgrade.py:59 ../yuminstall.py:1051 msgid "_Exit installer" msgstr "_Перервати встановлення" #: ../exception.py:421 ../exception.py:438 msgid "Dump Not Written" msgstr "Дамп не записано" #: ../exception.py:422 msgid "There was a problem writing the system state to the floppy." msgstr "Не вдається записати стан системи на дискету." #: ../exception.py:430 msgid "" "Your system's state has been successfully written to the remote host. The " "installer will now exit." msgstr "" "Стан вашої системи успішно збережено на віддалений вузол. Систему буде " "перезавантажено." #: ../exception.py:439 msgid "There was a problem writing the system state to the remote host." msgstr "Помилка при записі стану системи на віддалений вузол." #: ../fsset.py:216 msgid "Checking for Bad Blocks" msgstr "Пошук дефектних блоків" #: ../fsset.py:217 #, python-format msgid "Checking for bad blocks on /dev/%s..." msgstr "Пошук дефектних блоків на /dev/%s..." #: ../fsset.py:663 ../fsset.py:1427 ../fsset.py:1458 ../fsset.py:1518 #: ../fsset.py:1529 ../fsset.py:1583 ../fsset.py:1594 ../fsset.py:1634 #: ../fsset.py:1684 ../fsset.py:1765 ../fsset.py:1777 ../image.py:135 #: ../image.py:180 ../image.py:311 ../livecd.py:350 ../partIntfHelpers.py:406 #: ../urlinstall.py:112 ../urlinstall.py:206 ../yuminstall.py:442 #: ../yuminstall.py:762 ../yuminstall.py:802 ../yuminstall.py:1019 #: ../yuminstall.py:1044 ../iw/autopart_type.py:74 ../iw/autopart_type.py:209 #: ../iw/netconfig_dialog.py:267 ../iw/osbootwidget.py:216 #: ../iw/osbootwidget.py:225 ../iw/raid_dialog_gui.py:618 #: ../iw/raid_dialog_gui.py:657 ../iw/task_gui.py:79 ../iw/task_gui.py:145 #: ../textw/grpselect_text.py:116 ../textw/partition_text.py:1692 #: ../textw/partition_text.py:1698 ../textw/partition_text.py:1720 #: ../textw/upgrade_text.py:160 ../textw/upgrade_text.py:167 #: ../loader2/cdinstall.c:141 ../loader2/cdinstall.c:463 #: ../loader2/driverdisk.c:93 ../loader2/driverdisk.c:346 #: ../loader2/driverdisk.c:384 ../loader2/driverdisk.c:412 #: ../loader2/driverdisk.c:422 ../loader2/driverdisk.c:486 #: ../loader2/hdinstall.c:106 ../loader2/hdinstall.c:157 #: ../loader2/hdinstall.c:369 ../loader2/hdinstall.c:474 #: ../loader2/hdinstall.c:517 ../loader2/hdinstall.c:530 #: ../loader2/kickstart.c:279 ../loader2/lang.c:106 ../loader2/loader.c:316 #: ../loader2/loader.c:366 ../loader2/loader.c:852 ../loader2/mediacheck.c:329 #: ../loader2/mediacheck.c:387 ../loader2/method.c:157 ../loader2/method.c:375 #: ../loader2/method.c:449 ../loader2/nfsinstall.c:125 #: ../loader2/nfsinstall.c:205 ../loader2/nfsinstall.c:213 #: ../loader2/telnetd.c:87 ../loader2/urlinstall.c:68 #: ../loader2/urlinstall.c:91 ../loader2/urlinstall.c:142 #: ../loader2/urlinstall.c:155 ../loader2/urls.c:347 ../loader2/urls.c:352 msgid "Error" msgstr "Помилка" #: ../fsset.py:664 #, python-format msgid "" "An error occurred migrating %s to ext3. It is possible to continue without " "migrating this file system if desired.\n" "\n" "Would you like to continue without migrating %s?" msgstr "" "Помилка при перетворені %s на ext3. Можливо продовження встановлення без " "перетворення цієї ФС.\n" "\n" "Продовжити без перетворення %s?" #: ../fsset.py:1334 msgid "RAID Device" msgstr "пристрій RAID" #: ../fsset.py:1338 ../fsset.py:1344 msgid "Apple Bootstrap" msgstr "Apple Bootstrap" #: ../fsset.py:1349 ../partitions.py:900 msgid "PPC PReP Boot" msgstr "PPC PReP Boot" #: ../fsset.py:1352 msgid "First sector of boot partition" msgstr "Перший сектор завантажувального розділу" #: ../fsset.py:1353 msgid "Master Boot Record (MBR)" msgstr "Головний завантажувальний сектор (MBR)" #: ../fsset.py:1428 #, python-format msgid "" "An error occurred trying to initialize swap on device %s. This problem is " "serious, and the install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "Помилка при спробі ініціалізації пристрою підкачки %s. Це серйозна проблема, " "тому продовжувати встановлення неможливо.\n" "\n" "Натисніть для перезавантаження системи." #: ../fsset.py:1457 ../packages.py:282 ../rescue.py:300 ../rescue.py:302 #: ../textw/upgrade_text.py:118 ../loader2/cdinstall.c:258 #: ../loader2/cdinstall.c:261 ../loader2/method.c:422 msgid "Skip" msgstr "Пропустити" #: ../fsset.py:1478 #, python-format msgid "" "The swap device:\n" "\n" " /dev/%s\n" "\n" "is a version 0 Linux swap partition. If you want to use this device, you " "must reformat as a version 1 Linux swap partition. If you skip it, the " "installer will ignore it during the installation." msgstr "" "Пристрій підкачки:\n" "\n" " /dev/%s\n" "\n" "є пристроєм підкачки Linux версії 0. Якщо ви бажаєте використовувати цей " "пристрій, треба відформатувати його як розділ підкачки Linux версії 1. Якщо " "ви пропустите цей крок, програма встановлення проігнорує його в процесі " "встановлення." #: ../fsset.py:1485 msgid "Reformat" msgstr "Відформатувати" #: ../fsset.py:1489 #, python-format msgid "" "The swap device:\n" "\n" " /dev/%s\n" "\n" "in your /etc/fstab file is currently in use as a software suspend partition, " "which means your system is hibernating. To perform an upgrade, please shut " "down your system rather than hibernating it." msgstr "" "Пристрій підкачки:\n" "\n" " /dev/%s\n" "\n" "з файлу /etc/fstab наразі використовується як розділ для призупинення роботи " "системи, це означає, що ваша система знаходиться у \"режим сну\". Щоб " "виконати оновлення повністю вимкніть вашу систему замість переведення її у " "\"режим сну\"." #: ../fsset.py:1497 #, python-format msgid "" "The swap device:\n" "\n" " /dev/%s\n" "\n" "in your /etc/fstab file is currently in use as a software suspend partition, " "which means your system is hibernating. If you are performing a new install, " "make sure the installer is set to format all swap partitions." msgstr "" "Пристрій підкачки:\n" "\n" " /dev/%s\n" "\n" "з файлу /etc/fstab наразі використовується як розділ для призупинення " "системи, це означає, що ваша система знаходиться у \"режимі сну\". Якщо ви " "виконуєте нове встановлення, обов'язково вкажіть переформатування усіх " "розділів підкачки." #: ../fsset.py:1507 msgid "" "\n" "\n" "Choose Skip if you want the installer to ignore this partition during the " "upgrade. Choose Format to reformat the partition as swap space." msgstr "" "\n" "\n" "Виберіть \"Пропустити\", якщо ви бажаєте, щоб програма встановлення " "ігнорувала цей розділ при оновленні. Виберіть \"Формат\" для " "переформатування розділу як простору підкачки." #: ../fsset.py:1512 ../iw/partition_gui.py:368 msgid "Format" msgstr "Формат" #: ../fsset.py:1519 #, python-format msgid "" "Error enabling swap device %s: %s\n" "\n" "The /etc/fstab on your upgrade partition does not reference a valid swap " "partition.\n" "\n" "Press OK to exit the installer." msgstr "" "Помилка при підключенні пристрою підкачки %s: %s\n" "\n" "Файл /etc/fstab у розділі, що оновлюється, не містить опису робочого " "пристрою підкачки.\n" "\n" "Натисніть \"Гаразд\" переривання встановлення." #: ../fsset.py:1530 #, python-format msgid "" "Error enabling swap device %s: %s\n" "\n" "This most likely means this swap partition has not been initialized.\n" "\n" "Press OK to exit the installer." msgstr "" "Помилка при підключенні пристрою підкачки %s: %s\n" "\n" "Найбільш ймовірна причина - розділ не було ініціалізовано.\n" "\n" "Натисніть \"Гаразд\" для переривання встановлення." #: ../fsset.py:1584 #, python-format msgid "" "Bad blocks have been detected on device /dev/%s. We do not recommend you use " "this device.\n" "\n" "Press to exit the installer." msgstr "" "На пристрої /dev/%s виявлено пошкоджені блоки. Не рекомендується " "використовувати цей пристрій.\n" "\n" "Натисніть для переривання встановлення." #: ../fsset.py:1595 #, python-format msgid "" "An error occurred searching for bad blocks on %s. This problem is serious, " "and the install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "Помилка при пошуку пошкоджених блоків на пристрої %s. Це серйозна проблема, " "тому продовження процесу встановлення неможливе.\n" "\n" "Натисніть для переривання встановлення." #: ../fsset.py:1635 #, python-format msgid "" "An error occurred trying to format %s. This problem is serious, and the " "install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "Помилка при спробі форматування %s. Це серйозна проблема, тому продовження " "процесу встановлення неможливе.\n" "\n" "Натисніть для переривання встановлення." #: ../fsset.py:1685 #, python-format msgid "" "An error occurred trying to migrate %s. This problem is serious, and the " "install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "Помилка при спробі переносу %s. Це серйозна проблема, тому продовження " "процесу встановлення неможливе.\n" "\n" "Натисніть для переривання встановлення." #: ../fsset.py:1711 ../fsset.py:1720 msgid "Invalid mount point" msgstr "Некоректна точка монтування" #: ../fsset.py:1712 #, python-format msgid "" "An error occurred when trying to create %s. Some element of this path is " "not a directory. This is a fatal error and the install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "Помилка при спробі створення %s. Певний елемент шляху не є каталогом. Це " "серйозна проблема, тому продовження процесу встановлення неможливе.\n" "\n" "Натисніть для переривання встановлення." #: ../fsset.py:1721 #, python-format msgid "" "An error occurred when trying to create %s: %s. This is a fatal error and " "the install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "Помилка при спробі створити %s: %s. Це серйозна проблема,тому продовження " "процесу встановлення неможливе.\n" "\n" "Натисніть для переривання встановлення." #: ../fsset.py:1734 msgid "Unable to mount filesystem" msgstr "Не вдається підключити файлову систему" #: ../fsset.py:1735 #, python-format msgid "" "An error occurred mounting device %s as %s. You may continue installation, " "but there may be problems." msgstr "" "Помилка при підключенні пристрою %s як %s. Можна продовжити встановлення, " "але можуть виникати проблеми." #: ../fsset.py:1743 ../image.py:93 ../image.py:453 ../kickstart.py:1008 #: ../kickstart.py:1046 ../partedUtils.py:1179 ../upgrade.py:59 #: ../yuminstall.py:754 ../iw/partition_gui.py:1011 msgid "_Continue" msgstr "П_родовжити" #: ../fsset.py:1751 #, python-format msgid "" "Error mounting device %s as %s: %s\n" "\n" "Devices in /etc/fstab should be specified by label, not by device name.\n" "\n" "Press OK to exit the installer." msgstr "" "Помилка підключення пристрою %s як %s: %s\n" "\n" "Швидше за все цей розділ не було відформатовано.\n" "\n" "Натисніть \"Гаразд\" для переривання встановлення." #: ../fsset.py:1758 #, python-format msgid "" "Error mounting device %s as %s: %s\n" "\n" "This most likely means this partition has not been formatted.\n" "\n" "Press OK to exit the installer." msgstr "" "Помилка підключення пристрою %s як %s: %s\n" "\n" "Швидше за все цей розділ не було відформатовано.\n" "\n" "Натисніть \"Гаразд\" для переривання встановлення." #: ../fsset.py:1778 msgid "" "Error finding / entry.\n" "\n" "This is most likely means that your fstab is incorrect.\n" "\n" "Press OK to exit the installer." msgstr "" "Помилка підключення кореневого (/) запису.\n" "\n" "Швидше за все файл fstab - некоректний.\n" "\n" "Натисніть \"Гаразд\" для переривання встановлення." #: ../fsset.py:2432 msgid "Duplicate Labels" msgstr "Однакові позначки" #: ../fsset.py:2433 #, python-format msgid "" "Multiple devices on your system are labelled %s. Labels across devices must " "be unique for your system to function properly.\n" "\n" "Please fix this problem and restart the installation process." msgstr "" "Декілька пристроїв вашої системи мають однакові позначки %s. Для нормальної " "роботи системи позначки повинні бути унікальними.\n" "\n" "Виправте цю проблему та перезапустіть встановлення." #: ../fsset.py:2442 msgid "Invalid Label" msgstr "Некоректна позначка" #: ../fsset.py:2443 #, python-format msgid "" "An invalid label was found on device %s. Please fix this problem and " "restart the installation process." msgstr "" "Пристрій %s містить некоректну позначку. Виправте цю проблему та перезапустіть встановлення." #: ../fsset.py:2701 msgid "Formatting" msgstr "Форматування" #: ../fsset.py:2702 #, python-format msgid "Formatting %s file system..." msgstr "Форматування файлової системи %s..." #: ../gui.py:109 msgid "An error occurred copying the screenshots over." msgstr "Помилка при копіюванні знімків екрану." #: ../gui.py:120 msgid "Screenshots Copied" msgstr "Знімки екрану скопійовані" #: ../gui.py:121 msgid "" "The screenshots have been saved into the directory:\n" "\n" "\t/root/anaconda-screenshots/\n" "\n" "You can access these when you reboot and login as root." msgstr "" "Знімки екрану були скопійовані в каталог:\n" "\n" "\t/root/anaconda-screenshots/\n" "\n" "Ви можете переглянути їх після перезавантаження системи." #: ../gui.py:164 msgid "Saving Screenshot" msgstr "Збереження знімку екрану" #: ../gui.py:165 #, python-format msgid "A screenshot named '%s' has been saved." msgstr "Знімок екрану з назвою '%s' збережено." #: ../gui.py:168 msgid "Error Saving Screenshot" msgstr "Помилка збереження знімку екрану" #: ../gui.py:169 msgid "" "An error occurred while saving the screenshot. If this occurred during " "package installation, you may need to try several times for it to succeed." msgstr "" "При збереженні знімку екрану виникла помилка. Якщо ще сталося при " "встановленні пакетів, необхідно зробити ще декілька спроб отримання знімку." #: ../gui.py:234 ../text.py:440 msgid "Fix" msgstr "Виправити" #: ../gui.py:235 ../rescue.py:217 ../text.py:441 #: ../textw/bootloader_text.py:68 ../textw/constants_text.py:48 #: ../loader2/driverdisk.c:526 ../loader2/driverdisk.c:536 #: ../loader2/hdinstall.c:265 ../loader2/loader.c:411 msgid "Yes" msgstr "Так" #: ../gui.py:236 ../rescue.py:217 ../rescue.py:219 ../text.py:442 #: ../textw/bootloader_text.py:68 ../textw/constants_text.py:52 #: ../loader2/driverdisk.c:526 ../loader2/driverdisk.c:536 #: ../loader2/loader.c:411 msgid "No" msgstr "Ні" #: ../gui.py:238 ../text.py:444 ../text.py:572 ../loader2/net.c:97 #: ../loader2/net.c:329 ../loader2/net.c:583 ../loader2/net.c:691 #: ../loader2/net.c:791 ../loader2/net.c:799 ../loader2/net.c:1193 #: ../loader2/net.c:1199 msgid "Retry" msgstr "Повторити" #: ../gui.py:239 ../text.py:445 msgid "Ignore" msgstr "Ігнорувати" #: ../gui.py:240 ../gui.py:780 ../partIntfHelpers.py:237 #: ../partIntfHelpers.py:529 ../text.py:106 ../text.py:107 ../text.py:417 #: ../text.py:419 ../text.py:446 ../iw/bootloader_advanced_gui.py:47 #: ../textw/bootloader_text.py:198 ../textw/constants_text.py:40 #: ../loader2/dirbrowser.c:139 ../loader2/driverdisk.c:282 #: ../loader2/kickstart.c:366 ../loader2/loader.c:355 msgid "Cancel" msgstr "Скасувати" #: ../gui.py:607 ../text.py:360 msgid "Installation Key" msgstr "Ключ встановлення" #: ../gui.py:790 tmp/anaconda.glade.h:2 tmp/exn.glade.h:3 msgid "_Debug" msgstr "_Налагодження" #: ../gui.py:962 ../text.py:405 msgid "Error Parsing Kickstart Config" msgstr "Помилка аналізу конфігураційного файлу Kickstart" #: ../gui.py:970 ../text.py:415 msgid "" "Please insert a floppy now. All contents of the disk will be erased, so " "please choose your diskette carefully." msgstr "" "Вставте дискету. Весь зміст дискети буде знищено, то ж вибирайте дискету " "обережно." #: ../gui.py:1017 msgid "default:LTR" msgstr "типово:LTR" #: ../gui.py:1103 ../text.py:567 msgid "Error!" msgstr "Помилка!" #: ../gui.py:1104 ../text.py:568 #, python-format msgid "" "An error occurred when attempting to load an installer interface component.\n" "\n" "className = %s" msgstr "" "Помилка при спробі завантаження компоненту інтерфейсу програми " "встановлення.\n" "\n" "className = %s" #: ../gui.py:1109 ../harddrive.py:80 ../harddrive.py:126 ../image.py:526 #: ../packages.py:331 ../packages.py:336 msgid "_Exit" msgstr "Ви_йти" #: ../gui.py:1110 ../harddrive.py:81 ../image.py:527 ../yuminstall.py:445 #: ../yuminstall.py:748 ../yuminstall.py:796 ../yuminstall.py:1015 msgid "_Retry" msgstr "_Повторити" #: ../gui.py:1113 ../packages.py:335 msgid "The installer will now exit..." msgstr "Програма встановлення завершується..." #: ../gui.py:1116 ../packages.py:338 msgid "Your system will now be rebooted..." msgstr "Ваша система зараз буде перезавантажена..." #: ../gui.py:1117 ../image.py:93 ../packages.py:339 ../partedUtils.py:1178 #: ../iw/confirm_gui.py:32 ../textw/confirm_text.py:38 #: ../textw/confirm_text.py:66 msgid "_Reboot" msgstr "_Перезавантажити" #: ../gui.py:1119 msgid "Exiting" msgstr "Вихід" #: ../gui.py:1186 #, python-format msgid "%s Installer" msgstr "Програма встановлення %s" #: ../gui.py:1193 msgid "Unable to load title bar" msgstr "Не вдається завантажити заголовок" #: ../gui.py:1247 msgid "Install Window" msgstr "Вікно встановлення" #: ../harddrive.py:44 ../image.py:146 ../image.py:483 #, python-format msgid "" "The file %s cannot be opened. This is due to a missing file or perhaps a " "corrupt package. Please verify your installation images and that you have " "all the required media.\n" "\n" "If you exit, your system will be left in an inconsistent state that will " "likely require reinstallation.\n" "\n" msgstr "" "Не вдається відкрити файл %s. Можлива причина - відсутній файл або " "пошкоджений пакет. Перевірте образи встановлення та переконайтесь у цілісності необхідних для встановлення даних.\n" "\n" "При перевантаженні система залишиться у нестабільному стані, тому " "швидше за все знадобиться повторне встановлення.\n" "\n" #: ../harddrive.py:71 ../image.py:516 msgid "Missing ISO 9660 Image" msgstr "Відсутній образ ISO 9660" #: ../harddrive.py:72 #, python-format msgid "" "The installer has tried to mount image #%s, but cannot find it on the hard " "drive.\n" "\n" "Please copy this image to the drive and click Retry. Click Exit to abort " "the installation." msgstr "" "Програма встановлення намагалась підключити образ #%s, але він не знайдений " "на жорсткому диску.\n" "\n" "Скопіюйте цей образ на накопичувач та натисніть \"Повторити\". Щоб перервати встановлення, натисніть \"Перервати встановлення\"" #: ../harddrive.py:117 msgid "Couldn't Mount ISO Source" msgstr "Неможливо підключити образ ISO" #: ../harddrive.py:118 #, python-format msgid "" "An error occurred mounting the source device %s. This may happen if your " "ISO images are located on an advanced storage device like LVM or RAID, or if " "there was a problem mounting a partition. Click exit to abort the " "installation." msgstr "" "Помилка при підключенні пристрою %s. Це могло статися через те, що ваші ISO " "образи знаходяться на пристроях LVM або RAID або через проблеми з " "підключенням розділу. Натисніть кнопку перезавантаження, щоб перервати " "встановлення." #: ../image.py:84 msgid "Required Install Media" msgstr "Потрібний носій встановлення" #: ../image.py:85 #, python-format msgid "" "The software you have selected to install will require the following discs:\n" "\n" "%s\n" "Please have these ready before proceeding with the installation. If you " "need to abort the installation and exit please select \"Reboot\"." msgstr "" "Для встановлення обраних пакетів потрібні наступні диски:\n" "\n" "%s\n" "Перед продовженням встановлення переконайтесь, що у вас є всі перелічені " "диски. Якщо необхідно перервати встановлення, " "натисніть кнопку \"Перезавантаження\"." #: ../image.py:93 ../livecd.py:355 ../packages.py:285 ../packages.py:336 #: ../packages.py:339 ../yuminstall.py:1051 ../iw/confirm_gui.py:32 #: ../textw/confirm_text.py:38 ../textw/confirm_text.py:66 msgid "_Back" msgstr "_Назад" #: ../image.py:136 ../urlinstall.py:207 #, python-format msgid "" "An error occurred unmounting the disc. Please make sure you're not " "accessing %s from the shell on tty2 and then click OK to retry." msgstr "" "Помилка відключення CD. Переконайтесь, що ви не займаєте %s з оболонки на tty2, " "та натисніть Гаразд, щоб повторити спробу." #: ../image.py:170 ../urlinstall.py:102 msgid "Copying File" msgstr "Копіювання файлу" #: ../image.py:171 ../urlinstall.py:103 msgid "Transferring install image to hard drive..." msgstr "Перенесення образу встановлення на жорсткий диск..." #: ../image.py:181 ../urlinstall.py:113 msgid "" "An error occurred transferring the install image to your hard drive. You are " "probably out of disk space." msgstr "" "Помилка при перенесенні образу встановлення на жорсткий диск комп'ютера. " "Можливо не вистачає дискового простору." #: ../image.py:270 msgid "Change Disc" msgstr "Змінити диск" #: ../image.py:271 #, python-format msgid "Please insert %s disc %d to continue." msgstr "Вставте %s диск %d для продовження." #: ../image.py:305 msgid "Wrong Disc" msgstr "Неправильний диск" #: ../image.py:306 #, python-format msgid "That's not the correct %s disc." msgstr "Цей диск не є коректним диском %s." #: ../image.py:312 msgid "Unable to access the disc." msgstr "Не вдається отримати доступ до диску." #: ../image.py:369 #, python-format msgid "" "The file %s cannot be opened. This is due to a missing file or perhaps a " "corrupt package. Please verify your installation tree contains all required " "packages.\n" "\n" "If you exit, your system will be left in an inconsistent state that will " "likely require reinstallation.\n" "\n" msgstr "" "Не вдається відкрити файл %s. Можлива причина - відсутній файл або " "пошкоджений пакет. Перевірте, що дерево встановлення містить усі необхідні " "пакети. \n" "\n" "При перезавантаженні система залишиться у нестабільному стані, та ймовірно " "знадобиться перевстановлення.\n" "\n" #: ../image.py:443 #, python-format msgid "" "The ISO image %s has a size which is not a multiple of 2048 bytes. This may " "mean it was corrupted on transfer to this computer.\n" "\n" "It is recommended that you exit and abort your installation, but you can " "choose to continue if you think this is in error." msgstr "" "Розмір ISO образу %s не кратний 2048 байтам. Це може означати, що він був " "пошкоджений при копіюванні на цю машину.\n" "\n" "Рекомендується перезавантажити комп'ютер та перервати встановлення, але ви " "можете продовжити встановлення, якщо вважаєте, що це не помилка." #: ../image.py:517 #, python-format msgid "" "The installer has tried to mount image #%s, but cannot find it on the " "server.\n" "\n" "Please copy this image to the remote server's share path and click Retry. " "Click Exit to abort the installation." msgstr "" "Програма встановлення намагалась підключити образ #%s, але не може знайти " "його на сервері.\n" "\n" "Скопіюйте цей образ у спільну теку віддаленого сервера та натисніть " "Повторити. Щоб перервати встановлення, натисніть \"Перервати встановлення\"." #: ../installclass.py:67 msgid "Install on System" msgstr "Встановлення системи" #: ../iscsi.py:199 ../iscsi.py:200 msgid "Initializing iSCSI initiator" msgstr "Ініціалізується ініціатор iSCSI" #: ../kickstart.py:75 msgid "Scriptlet Failure" msgstr "Помилка виконання сценарію" #: ../kickstart.py:76 #, python-format msgid "" "There was an error running the scriptlet. You may examine the output in %" "s. This is a fatal error and your install will be aborted.\n" "\n" "Press the OK button to exit the installer." msgstr "" "Помилка при виконанні сценарію. Можете переглянути вивід %s. Це серйозна " "проблема, тому продовження процесу встановлення неможливе.\n" "\n" "Натисніть Гаразд для переривання встановлення." #: ../kickstart.py:951 ../kickstart.py:968 msgid "Running..." msgstr "Виконання..." #: ../kickstart.py:952 msgid "Running post-install scripts" msgstr "Запуск пост-встановлювальних сценаріїв" #: ../kickstart.py:969 msgid "Running pre-install scripts" msgstr "Запуск пред-встановлювальних сценаріїв" #: ../kickstart.py:1000 msgid "Missing Package" msgstr "Відсутній пакет" #: ../kickstart.py:1001 #, python-format msgid "" "You have specified that the package '%s' should be installed. This package " "does not exist. Would you like to continue or abort your installation?" msgstr "" "Ви вказали, що пакет '%s' має бути встановлений. Цей пакет не існує. " "Продовжити чи перервати встановлення?" #: ../kickstart.py:1007 ../kickstart.py:1045 ../yuminstall.py:748 #: ../yuminstall.py:751 msgid "_Abort" msgstr "_Перервати" #: ../kickstart.py:1037 msgid "Missing Group" msgstr "Відсутня група" #: ../kickstart.py:1038 #, python-format msgid "" "You have specified that the group '%s' should be installed. This group does " "not exist. Would you like to continue or abort your installation?" msgstr "" "Ви вказали, що має бути встановлена група '%s'. Ця група не існує. " "Продовжити чи перервати встановлення?" #: ../livecd.py:93 msgid "Unable to find image" msgstr "Не вдається знайти образ" #: ../livecd.py:94 #, python-format msgid "" "The given location isn't a valid %s live CD to use as an installation source." msgstr "Вказаний шлях путь не є коректним %s live CD для встановлення." #: ../livecd.py:98 msgid "Exit installer" msgstr "Перервати встановлення" #: ../livecd.py:174 msgid "Copying live image to hard drive." msgstr "Перенесення образу live встановлення на жорсткий диск." #: ../livecd.py:203 msgid "Doing post-installation" msgstr "Завершення встановлення" #: ../livecd.py:204 msgid "" "Performing post-installation filesystem changes. This may take several " "minutes..." msgstr "" "Виконання завершальних операцій з файловою системою. Це може зайняти " "декілька хвилин..." #: ../network.py:51 msgid "Hostname must be 64 or less characters in length." msgstr "Довжина назви комп'ютера не повинна перевищувати 64 символи." #: ../network.py:54 msgid "Hostname must start with a valid character in the range 'a-z' or 'A-Z'" msgstr "" "Назва комп'ютера повинна починатись з символів в діапазоні 'a-z' або 'A-Z'" #: ../network.py:59 msgid "Hostnames can only contain the characters 'a-z', 'A-Z', '-', or '.'" msgstr "" "Назва комп'ютера повинна містити символи в діапазоні 'a-z' або 'A-Z', '-', " "чи '.'" #: ../network.py:89 msgid "IP address is missing." msgstr "Не вказано адресу IP." #: ../network.py:93 msgid "" "IPv4 addresses must contain four numbers between 0 and 255, separated by " "periods." msgstr "Адреса IP повинна містити чотири числа від 0 до 255, розділені точкою." #: ../network.py:96 #, python-format msgid "'%s' is not a valid IPv6 address." msgstr "%s не є припустимою адресою IPv6." #: ../network.py:98 #, python-format msgid "'%s' is an invalid IP address." msgstr "%s не є припустимою адресою IP." #: ../packages.py:256 msgid "Invalid Key" msgstr "Неправильний ключ" #: ../packages.py:257 msgid "The key you entered is invalid." msgstr "Вказано неправильний ключ." #: ../packages.py:285 msgid "_Skip" msgstr "_Пропустити" #: ../packages.py:317 ../packages.py:340 msgid "Warning! This is pre-release software!" msgstr "Увага! Це попередній випуск!" #: ../packages.py:318 #, python-format msgid "" "Thank you for downloading this pre-release of %s.\n" "\n" "This is not a final release and is not intended for use on production " "systems. The purpose of this release is to collect feedback from testers, " "and it is not suitable for day to day usage.\n" "\n" "To report feedback, please visit:\n" "\n" " %s\n" "\n" "and file a report against '%s'.\n" msgstr "" "Дякуємо за завантаження попереднього випуску %s.\n" "\n" "Цей випуск не є остаточним та не призначений для повсякденного та " "промислового використання. Мета цього випуску - збір звітів від " "випробувачів.\n" "\n" "Щоб сповістити про виявлені проблеми, відвідайте:\n" "\n" " %s \n" "\n" "та заповніть звіт відносно '%s'.\n" #: ../packages.py:331 msgid "_Install anyway" msgstr "_Встановити все одно" #: ../partedUtils.py:205 ../textw/partition_text.py:570 msgid "Foreign" msgstr "Чужий" #: ../partedUtils.py:305 #, python-format msgid "" "The device %s is LDL formatted instead of CDL formatted. LDL formatted " "DASDs are not supported for usage during an install of %s. If you wish to " "use this disk for installation, it must be re-initialized causing the loss " "of ALL DATA on this drive.\n" "\n" "Would you like to reformat this DASD using CDL format?" msgstr "" "Пристрій %s форматований як LDL а не як CDL. DASD форматовані як LDL не " "підтримуються програмою встановлення %s. Якщо ви бажаєте використовувати цей " "диск для встановлення, необхідно пере-ініціалізувати його, що призведе до " "втрати ВСІХ ДАНИХ на цьому пристрої.\n" "\n" "Переформатувати DASD використовуючи CDL формат?" #: ../partedUtils.py:335 #, python-format msgid "" "/dev/%s currently has a %s partition layout. To use this drive for the " "installation of %s, it must be re-initialized, causing the loss of ALL DATA " "on this drive.\n" "\n" "Would you like to re-initialize this drive?" msgstr "" "Пристрій /dev/%s вже має таблицю розділів типу %s. Щоб використати цей " "пристрій для встановлення %s, його потрібно повторно ініціалізувати, що " "призведе до втрати ВСІХ ДАНИХ на цьому пристрої.\n" "\n" "Ініціалізувати цей пристрій?" #: ../partedUtils.py:344 msgid "_Ignore drive" msgstr "_Ігнорувати пристрій" #: ../partedUtils.py:345 msgid "_Re-initialize drive" msgstr "_Переініціалізувати диск" #: ../partedUtils.py:911 msgid "Initializing" msgstr "Ініціалізація" #: ../partedUtils.py:912 #, python-format msgid "Please wait while formatting drive %s...\n" msgstr "Будь ласка, зачекайте поки триває форматування пристрою %s...\n" #: ../partedUtils.py:1076 #, python-format msgid "" "The partition table on device %s (%s) was unreadable. To create new " "partitions it must be initialized, causing the loss of ALL DATA on this " "drive.\n" "\n" "This operation will override any previous installation choices about which " "drives to ignore.\n" "\n" "Would you like to initialize this drive, erasing ALL DATA?" msgstr "" "Таблицю розділів на пристрої %s (%s) неможливо прочитати. Для створення " "нових розділів пристрій треба ініціалізувати, що призведе до втрати ВСІХ " "ДАНИХ на цьому пристрої.\n" "\n" "Ця операція відмінить зроблений раніше вибір ігнорованих дисків.\n" "\n" "Ви дійсно хочете ініціалізувати цей пристрій з видаленням УСІХ ДАНИХ?" #: ../partedUtils.py:1125 #, python-format msgid "" "The partition table on device %s was unreadable. To create new partitions it " "must be initialized, causing the loss of ALL DATA on this drive.\n" "\n" "This operation will override any previous installation choices about which " "drives to ignore.\n" "\n" "Would you like to initialize this drive, erasing ALL DATA?" msgstr "" "Таблицю розділів на пристрої %s неможливо прочитати. Для створення нових " "розділів його треба ініціалізувати, що призведе до втрати ВСІХ ДАНИХ на " "цьому пристрої.\n" "\n" "Ця операція відмінить зроблений раніше вибір ігнорованих дисків.\n" "\n" "Ви дійсно хочете ініціалізувати цей пристрій з видаленням УСІХ ДАНИХ?" #: ../partedUtils.py:1168 #, python-format msgid "" "The drive /dev/%s has more than 15 partitions on it. The SCSI subsystem in " "the Linux kernel does not allow for more than 15 partitons at this time. " "You will not be able to make changes to the partitioning of this disk or use " "any partitions beyond /dev/%s15 in %s" msgstr "" "Пристрій /dev/%s містить більше ніж 15 розділів. Підсистема SCSI ядра Linux " "наразі не дозволяє працювати більш ніж з 15 розділами. Ви не " "зможете змінити конфігурацію цього диску та не зможете працювати з " "розділами вище /dev/%s15 на %s" #: ../partedUtils.py:1184 #, python-format msgid "" "The drive /dev/%s has more than 15 partitions on it. The SCSI subsystem in " "the Linux kernel does not allow for more than 15 partitions at this time. " "You will not be able to make changes to the partitioning of this disk or use " "any partitions beyond /dev/%s15 in %s" msgstr "" "Пристрій /dev/%s містить більше ніж 15 розділів. Підсистема SCSI ядра Linux " "наразі не дозволяє працювати більше ніж з 15 розділами. Ви не " "зможете змінити конфігурацію цього диску та не зможете працювати з " "розділами вище /dev/%s15 на %s" #: ../partedUtils.py:1276 msgid "No Drives Found" msgstr "Диски не знайдено" #: ../partedUtils.py:1277 msgid "" "An error has occurred - no valid devices were found on which to create new " "file systems. Please check your hardware for the cause of this problem." msgstr "" "Помилка - не знайдено придатних пристроїв для створення нових файлових " "систем. Перевірте обладнання, щоб встановити причину." #: ../partIntfHelpers.py:35 msgid "Please enter a volume group name." msgstr "Введіть назву групи томів." #: ../partIntfHelpers.py:39 msgid "Volume Group Names must be less than 128 characters" msgstr "Довжина назви групи томів не повинна перевищувати 128 символів" #: ../partIntfHelpers.py:42 #, python-format msgid "Error - the volume group name %s is not valid." msgstr "Помилка - назва групи томів %s неправильна." #: ../partIntfHelpers.py:47 msgid "" "Error - the volume group name contains illegal characters or spaces. " "Acceptable characters are letters, digits, '.' or '_'." msgstr "" "Помилка - назва групи томів містить неприпустимі символи або пробіли. " "Дозволяються літери, цифри, '.' або '_'." #: ../partIntfHelpers.py:57 msgid "Please enter a logical volume name." msgstr "Введіть назву логічного тому." #: ../partIntfHelpers.py:61 msgid "Logical Volume Names must be less than 128 characters" msgstr "Довжина назви логічного тому не повинна перевищувати 128 символів" #: ../partIntfHelpers.py:65 #, python-format msgid "Error - the logical volume name %s is not valid." msgstr "Помилка - назва логічного тому %s неправильна." #: ../partIntfHelpers.py:71 msgid "" "Error - the logical volume name contains illegal characters or spaces. " "Acceptable characters are letters, digits, '.' or '_'." msgstr "" "Помилка - назва логічного тому містить неприпустимі символи або пробіли. " "Дозволяються літери, цифри, '.' або '_'." #: ../partIntfHelpers.py:95 #, python-format msgid "" "The mount point %s is invalid. Mount points must start with '/' and cannot " "end with '/', and must contain printable characters and no spaces." msgstr "" "Некоректна точка монтування %s. Точка монтування повинна починатися з '/' та " "не може закінчуватися на \"/\", та має містити лише друковані символи, без " "пробілів." #: ../partIntfHelpers.py:102 msgid "Please specify a mount point for this partition." msgstr "Вкажіть точку монтування для цього розділу." #: ../partIntfHelpers.py:112 #, python-format msgid "This partition is part of the RAID device /dev/md%s." msgstr "Цей розділ є частиною пристрою RAID /dev/md%s." #: ../partIntfHelpers.py:115 msgid "This partition is part of a RAID device." msgstr "Цей розділ є частиною пристрою RAID." #: ../partIntfHelpers.py:120 #, python-format msgid "This partition is part of the LVM volume group '%s'." msgstr "Цей розділ є частиною пристрою групи томів LVM '%s'." #: ../partIntfHelpers.py:123 msgid "This partition is part of a LVM volume group." msgstr "Цей розділ є частиною пристрою групи томів LVM." #: ../partIntfHelpers.py:138 ../partIntfHelpers.py:146 #: ../partIntfHelpers.py:153 ../partIntfHelpers.py:163 #: ../partIntfHelpers.py:187 msgid "Unable To Delete" msgstr "Не вдається видалити" #: ../partIntfHelpers.py:139 msgid "You must first select a partition to delete." msgstr "Необхідно вказати розділ для видалення." #: ../partIntfHelpers.py:147 msgid "You cannot delete free space." msgstr "Не можна видаляти вільний простір." #: ../partIntfHelpers.py:154 msgid "You cannot delete a partition of a LDL formatted DASD." msgstr "Неможливо видалити DASD, відформатований як LDL" #: ../partIntfHelpers.py:164 #, python-format msgid "" "You cannot delete this partition, as it is an extended partition which " "contains %s" msgstr "" "Не можна видаляти цей розділ, тому що це - розширений розділ, який містить %s" #: ../partIntfHelpers.py:182 ../iw/raid_dialog_gui.py:554 msgid "This partition is holding the data for the hard drive install." msgstr "Цей розділ містить дані для встановлення з жорсткого диску." #: ../partIntfHelpers.py:188 msgid "" "You cannot delete this partition:\n" "\n" msgstr "" "Не вдається видалити цей розділ:\n" "\n" #: ../partIntfHelpers.py:233 ../partIntfHelpers.py:528 #: ../iw/lvm_dialog_gui.py:755 msgid "Confirm Delete" msgstr "Підтвердження видалення" #: ../partIntfHelpers.py:234 #, python-format msgid "You are about to delete all partitions on the device '/dev/%s'." msgstr "Ви збираєтесь видалити всі розділи на пристрої '/dev/%s'." #: ../partIntfHelpers.py:237 ../partIntfHelpers.py:529 #: ../iw/lvm_dialog_gui.py:758 ../iw/lvm_dialog_gui.py:1107 #: ../iw/osbootwidget.py:104 ../iw/partition_gui.py:1353 msgid "_Delete" msgstr "В_идалити" #: ../partIntfHelpers.py:295 msgid "Notice" msgstr "Примітка" #: ../partIntfHelpers.py:296 #, python-format msgid "" "The following partitions were not deleted because they are in use:\n" "\n" "%s" msgstr "" "Наступні розділи не були видалені, тому що вони використовуються:\n" "\n" "%s" #: ../partIntfHelpers.py:312 ../partIntfHelpers.py:325 #: ../partIntfHelpers.py:351 ../partIntfHelpers.py:362 msgid "Unable To Edit" msgstr "Правка неможлива" #: ../partIntfHelpers.py:313 msgid "You must select a partition to edit" msgstr "Необхідно вказати розділ для правки" #: ../partIntfHelpers.py:325 ../partIntfHelpers.py:363 msgid "" "You cannot edit this partition:\n" "\n" msgstr "" "Не вдається змінити цей розділ:\n" "\n" #: ../partIntfHelpers.py:352 #, python-format msgid "" "You cannot edit this partition, as it is an extended partition which " "contains %s" msgstr "" "Ви не можете змінити цей розділ, бо це розширений розділ який містить %s" #: ../partIntfHelpers.py:384 msgid "Format as Swap?" msgstr "Форматувати як swap?" #: ../partIntfHelpers.py:385 #, python-format msgid "" "/dev/%s has a partition type of 0x82 (Linux swap) but does not appear to be " "formatted as a Linux swap partition.\n" "\n" "Would you like to format this partition as a swap partition?" msgstr "" "/dev/%s має тип розділу 0x82 (Linux swap), але він не форматований як розділ " "Linux swap.\n" "\n" "Форматувати цей розділ як розділ підкачки?" #: ../partIntfHelpers.py:405 #, python-format msgid "You need to select at least one hard drive to install %s." msgstr "Необхідно вибрати хоча б один жорсткий диск для встановлення %s." #: ../partIntfHelpers.py:410 msgid "" "You have chosen to use a pre-existing partition for this installation " "without formatting it. We recommend that you format this partition to make " "sure files from a previous operating system installation do not cause " "problems with this installation of Linux. However, if this partition " "contains files that you need to keep, such as home directories, then " "continue without formatting this partition." msgstr "" "Ви вирішили для цього встановлення використовувати раніше створений розділ " "без його форматування. Ми рекомендуємо відформатувати цей розділ, щоб файли " "з попереднього встановлення не викликали проблем з цим встановленням Linux. " "Проте, якщо розділ містить файли, які необхідно зберегти, наприклад домашні " "каталоги користувачів, ви можете продовжити без форматування цього розділу." #: ../partIntfHelpers.py:418 msgid "Format?" msgstr "Форматувати?" #: ../partIntfHelpers.py:418 ../iw/partition_gui.py:1009 msgid "_Modify Partition" msgstr "_Змінити розділ" #: ../partIntfHelpers.py:418 msgid "Do _Not Format" msgstr "_Не форматувати" #: ../partIntfHelpers.py:426 msgid "Error with Partitioning" msgstr "Помилка розподілу" #: ../partIntfHelpers.py:427 #, python-format msgid "" "The following critical errors exist with your requested partitioning scheme. " "These errors must be corrected prior to continuing with your install of %s.\n" "\n" "%s" msgstr "" "Вибрана вами схема розподілу викликала наступні критичні помилки. Ці помилки " "необхідно виправити перед продовженням встановлення %s.\n" "\n" "%s" #: ../partIntfHelpers.py:441 msgid "Partitioning Warning" msgstr "Попередження розподілу" #: ../partIntfHelpers.py:442 #, python-format msgid "" "The following warnings exist with your requested partition scheme.\n" "\n" "%s\n" "\n" "Would you like to continue with your requested partitioning scheme?" msgstr "" "Вибрана вами схема розподілу викликала наступні критичні помилки.\n" "\n" "%s\n" "\n" "Бажаєте продовжити з вибраною схемою розподілу?" #: ../partIntfHelpers.py:456 ../iw/partition_gui.py:664 msgid "" "The following pre-existing partitions have been selected to be formatted, " "destroying all data." msgstr "" "Наступні, існуючі до цього, розділи вибрані для форматування зі знищенням " "усіх даних." #: ../partIntfHelpers.py:459 msgid "" "Select 'Yes' to continue and format these partitions, or 'No' to go back and " "change these settings." msgstr "" "Виберіть 'Так' для продовження та форматування цих розділів. Натискання " "кнопки 'Ні' дозволить повернутись та змінити параметри." #: ../partIntfHelpers.py:465 msgid "Format Warning" msgstr "Попередження форматування" #: ../partIntfHelpers.py:513 #, python-format msgid "" "You are about to delete the volume group \"%s\".\n" "\n" "ALL logical volumes in this volume group will be lost!" msgstr "" "Ви намагаєтесь видалити групу томів \"%s\"\n" "\n" "ВСІ логічні томи у цій групі будуть втрачені!" #: ../partIntfHelpers.py:517 #, python-format msgid "You are about to delete the logical volume \"%s\"." msgstr "Ви збираєтесь видалити логічний том \"%s\"." #: ../partIntfHelpers.py:520 msgid "You are about to delete a RAID device." msgstr "Ви збираєтесь видалити пристрій RAID." #: ../partIntfHelpers.py:523 #, python-format msgid "You are about to delete the /dev/%s partition." msgstr "Ви збираєтесь видалити розділ /dev/%s." #: ../partIntfHelpers.py:526 msgid "The partition you selected will be deleted." msgstr "Вибраний вами розділ буде видалено." #: ../partIntfHelpers.py:536 msgid "Confirm Reset" msgstr "Підтвердження відновлення" #: ../partIntfHelpers.py:537 msgid "" "Are you sure you want to reset the partition table to its original state?" msgstr "Ви впевнені, що хочете відновити початковий стан таблиці розділів?" #: ../partitioning.py:61 msgid "Installation cannot continue." msgstr "Продовження встановлення неможливе." #: ../partitioning.py:62 msgid "" "The partitioning options you have chosen have already been activated. You " "can no longer return to the disk editing screen. Would you like to continue " "with the installation process?" msgstr "" "Вибрані вами параметри розподілу вже активовані. Ви не зможете повернутися " "до екрану редагування диску. Продовжити процес встановлення?" #: ../partitioning.py:92 msgid "Low Memory" msgstr "Недостатньо пам'яті" #: ../partitioning.py:93 msgid "" "As you don't have much memory in this machine, we need to turn on swap space " "immediately. To do this we'll have to write your new partition table to the " "disk immediately. Is that OK?" msgstr "" "Оскільки у вашій системі недостатньо пам'яті, необхідно негайно підключити " "простір підкачки. Для цього потрібно записати нову таблицю розділів на диск. " "Згодні?" #: ../partitions.py:816 #, python-format msgid "" "You have not defined a root partition (/), which is required for " "installation of %s to continue." msgstr "" "Ви не вказали кореневий розділ (/), який вимагається для продовження " "встановлення %s." #: ../partitions.py:821 #, python-format msgid "" "Your root partition is less than 250 megabytes which is usually too small to " "install %s." msgstr "" "Ваш кореневий розділ менше ніж 250 мегабайтів, чого, зазвичай, дуже мало для " "встановлення %s." #: ../partitions.py:840 msgid "" "Your boot partition isn't on one of the first four partitions and thus won't " "be bootable." msgstr "" "Ваш завантажувальний розділ не є одним з чотирьох перших розділів, тому " "завантажитись з нього буде неможливо." #: ../partitions.py:847 msgid "" "You must create a /boot/efi partition of type FAT and a size of 50 megabytes." msgstr "Необхідно створити розділ /boot/efi типу FAT розміром 50 мегабайтів." #: ../partitions.py:867 msgid "You must create an Apple Bootstrap partition." msgstr "Необхідно створити завантажувальний розділ Apple Bootstrap." #: ../partitions.py:889 msgid "You must create a PPC PReP Boot partition." msgstr "Необхідно створити завантажувальний розділ PPC PReP." #: ../partitions.py:897 ../partitions.py:908 #, python-format msgid "" "Your %s partition is less than %s megabytes which is lower than recommended " "for a normal %s install." msgstr "" "Розмір розділу %s менший ніж %s мегабайтів, що менше ніж рекомендовано для " "нормального встановлення %s." #: ../partitions.py:942 msgid "" "Installing on a USB device. This may or may not produce a working system." msgstr "" "Встановлення на пристрій USB. Існує можливість отримання непрацездатної " "системи." #: ../partitions.py:945 msgid "" "Installing on a FireWire device. This may or may not produce a working " "system." msgstr "" "Встановлення на пристрій FireWire. Існує можливість отримання " "непрацездатної системи." #: ../partitions.py:954 ../partRequests.py:679 msgid "Bootable partitions can only be on RAID1 devices." msgstr "Завантажувальні розділи можливі лише на RAID1 пристроях." #: ../partitions.py:961 msgid "Bootable partitions cannot be on a logical volume." msgstr "Завантажувальні розділи на логічних томах не допускаються." #: ../partitions.py:986 msgid "" "You have not specified a swap partition. Although not strictly required in " "all cases, it will significantly improve performance for most installations." msgstr "" "Ви не вказали розділ підкачки. Хоча він не є обов'язковим для роботи, він " "може суттєво поліпшити швидкодію системи." #: ../partitions.py:993 #, python-format msgid "" "You have specified more than 32 swap devices. The kernel for %s only " "supports 32 swap devices." msgstr "" "Ви вказали більше ніж 32 пристрої підкачки. Ядро %s підтримує лише 32 " "пристрої." #: ../partitions.py:1004 #, python-format msgid "" "You have allocated less swap space (%dM) than available RAM (%dM) on your " "system. This could negatively impact performance." msgstr "" "Відведений простір підкачки (%dM) менше ніж об'єм оперативної пам'яті (%dM) " "у вашій системі. Це може негативно вплинути на швидкодію." #: ../partitions.py:1304 msgid "the partition in use by the installer." msgstr "розділ використовується програмою встановлення." #: ../partitions.py:1307 msgid "a partition which is a member of a RAID array." msgstr "розділ, який входить до RAID масиву." #: ../partitions.py:1310 msgid "a partition which is a member of a LVM Volume Group." msgstr "розділ, який входить до групи томів LVM." #: ../partRequests.py:249 #, python-format msgid "" "This mount point is invalid. The %s directory must be on the / file system." msgstr "" "Неправильна точка монтування. Каталог %s має бути у кореневій файловій " "системі." #: ../partRequests.py:252 #, python-format msgid "" "The mount point %s cannot be used. It must be a symbolic link for proper " "system operation. Please select a different mount point." msgstr "" "Точка монтування %s не може бути використана. Для нормальної роботи системи " "вона повинна бути символічним посиланням. Виберіть іншу точку монтування." #: ../partRequests.py:259 msgid "This mount point must be on a linux file system." msgstr "Ця точка монтування повинна бути на файловій системі Linux." #: ../partRequests.py:280 #, python-format msgid "" "The mount point \"%s\" is already in use, please choose a different mount " "point." msgstr "" "Точка монтування \"%s\" вже використовується, вкажіть іншу точку монтування." #: ../partRequests.py:294 #, python-format msgid "" "The size of the %s partition (%10.2f MB) exceeds the maximum size of %10.2f " "MB." msgstr "" "Розмір розділу %s (розмір = %10.2f MB) перевищив максимальний розмір %10.2f " "Мб." #: ../partRequests.py:490 #, python-format msgid "" "The size of the requested partition (size = %s MB) exceeds the maximum size " "of %s MB." msgstr "" "Розмір запитаного розділу (розмір = %s Мб) перевищив максимальний розмір %s " "Мб." #: ../partRequests.py:495 #, python-format msgid "The size of the requested partition is negative! (size = %s MB)" msgstr "Від'ємний розмір запитаного розділу! (розмір = %s Мб)" #: ../partRequests.py:499 msgid "Partitions can't start below the first cylinder." msgstr "Розділи не можуть починатись нижче першого циліндру." #: ../partRequests.py:502 msgid "Partitions can't end on a negative cylinder." msgstr "Розділи не можуть закінчуватись від'ємним циліндром." #: ../partRequests.py:671 msgid "No members in RAID request, or not RAID level specified." msgstr "В запиті RAID немає членів, або не вказано рівень RAID." #: ../partRequests.py:683 #, python-format msgid "A RAID device of type %s requires at least %s members." msgstr "Пристрій RAID типу %s необхідно принаймні %s членів." #: ../partRequests.py:692 #, python-format msgid "" "This RAID device can have a maximum of %s spares. To have more spares you " "will need to add members to the RAID device." msgstr "" "Цей RAID пристрій може мати не більше ніж %s резервних дисків. Щоб отримати " "більшу кількість резервних дисків, необхідно збільшити кількість членів " "пристрою RAID." #: ../partRequests.py:926 msgid "" "Logical volume size must be larger than the volume group's physical extent " "size." msgstr "Розмір логічного тому має бути більшим, ніж розмір фізичного екстенту." #: ../rescue.py:146 msgid "Starting Interface" msgstr "Запуск інтерфейсу" #: ../rescue.py:147 #, python-format msgid "Attempting to start %s" msgstr "Спроба запустити %s" #: ../rescue.py:189 msgid "When finished please exit from the shell and your system will reboot." msgstr "" "Після завершення вийдіть (exit) з командної оболонки і вашу систему буде " "перевантажено." #: ../rescue.py:215 msgid "Setup Networking" msgstr "Налаштовування мережі" #: ../rescue.py:216 msgid "Do you want to start the network interfaces on this system?" msgstr "Активувати мережні інтерфейси цієї системи?" #: ../rescue.py:256 ../text.py:598 msgid "Cancelled" msgstr "Скасовано" #: ../rescue.py:257 ../text.py:599 msgid "I can't go to the previous step from here. You will have to try again." msgstr "" "Повернутися до попереднього етапу неможливо. Потрібно повторити спробу." #: ../rescue.py:289 ../rescue.py:356 ../rescue.py:364 ../rescue.py:445 msgid "Rescue" msgstr "Відновлення" #: ../rescue.py:290 #, python-format msgid "" "The rescue environment will now attempt to find your Linux installation and " "mount it under the directory %s. You can then make any changes required to " "your system. If you want to proceed with this step choose 'Continue'. You " "can also choose to mount your file systems read-only instead of read-write " "by choosing 'Read-Only'.\n" "\n" "If for some reason this process fails you can choose 'Skip' and this step " "will be skipped and you will go directly to a command shell.\n" "\n" msgstr "" "Оболонка рятування спробує знайти ваше встановлення Linux та підключити її у " "каталозі %s. Після чого ви зможете зробити будь-які необхідні зміни у вашій " "системі. Натисніть клавішу 'Продовжити'. Також ви можете підключити ваші " "файлові системи в режимі \"лише читання\" замість\"читання-запис\", " "натиснувши кнопку \"Лише для читання\".\n" "\n" "Якщо з певної причини це не вдається, ви можете натиснути \"Пропустити\", і " "тоді ви попадете безпосередньо у командну оболонку.\n" "\n" #: ../rescue.py:300 ../iw/partition_gui.py:567 ../textw/network_text.py:55 #: ../loader2/cdinstall.c:113 ../loader2/cdinstall.c:121 #: ../loader2/driverdisk.c:487 msgid "Continue" msgstr "Продовжити" #: ../rescue.py:300 ../rescue.py:305 msgid "Read-Only" msgstr "Лише для читання" #: ../rescue.py:331 msgid "System to Rescue" msgstr "Система відновлення" #: ../rescue.py:332 msgid "What partition holds the root partition of your installation?" msgstr "" "На якому розділі міститься коренева файлова система вашого встановлення?" #: ../rescue.py:334 ../rescue.py:338 ../text.py:572 ../text.py:574 msgid "Exit" msgstr "Вийти" #: ../rescue.py:357 msgid "" "Your system had dirty file systems which you chose not to mount. Press " "return to get a shell from which you can fsck and mount your partitions. " "The system will reboot automatically when you exit from the shell." msgstr "" "У вашій системі є \"брудні\" файлові системи, які не були вибрані для " "підключення. Натисніть \"Enter\", щоб перейти у оболонку, у якій можна " "виконати fsck та підключити ці розділи. Після виходу з оболонки систему буде " "автоматично перезавантажено." #: ../rescue.py:365 #, python-format msgid "" "Your system has been mounted under %s.\n" "\n" "Press to get a shell. If you would like to make your system the " "root environment, run the command:\n" "\n" "\tchroot %s\n" "\n" "The system will reboot automatically when you exit from the shell." msgstr "" "Вашу систему було підключено у %s.\n" "\n" "Натисніть , щоб перейти у оболонку. Якщо ви хочете зробити вашу " "систему кореневим оточенням, виконайте команду:\n" "\n" "\tchroot %s\n" "\n" "Систему буде автоматично перезавантажено після виходу з оболонки." #: ../rescue.py:446 #, python-format msgid "" "An error occurred trying to mount some or all of your system. Some of it may " "be mounted under %s.\n" "\n" "Press to get a shell. The system will reboot automatically when you " "exit from the shell." msgstr "" "Помилка при підключенні вашої системи або її частини. Її частину було " "підключено у %s.\n" "\n" "Натисніть , щоб попасти в оболонку. При виході з оболонки система " "перезавантажиться автоматично." #: ../rescue.py:452 msgid "Rescue Mode" msgstr "Режим відновлення" #: ../rescue.py:453 msgid "" "You don't have any Linux partitions. Press return to get a shell. The system " "will reboot automatically when you exit from the shell." msgstr "" "Ви не маєте жодного розділу Linux. Натисніть , щоб перейти у " "оболонку. Систему буде автоматично перезавантажено після виходу з оболонки." #: ../rescue.py:466 #, python-format msgid "Your system is mounted under the %s directory." msgstr "Систему підключено у каталог %s." #: ../text.py:153 ../text.py:168 msgid "Save" msgstr "Зберегти" #: ../text.py:156 ../text.py:170 msgid "Remote" msgstr "Переслати" #: ../text.py:158 ../text.py:166 msgid "Debug" msgstr "Налагодження" #: ../text.py:162 msgid "Exception Occurred" msgstr "Виникла виключна ситуація" #: ../text.py:191 msgid "Save to Remote Host" msgstr "Зберегти на віддалену систему" #: ../text.py:194 msgid "Host" msgstr "Комп'ютер" #: ../text.py:196 msgid "Remote path" msgstr "Шлях до віддаленої машини" #: ../text.py:198 msgid "User name" msgstr "Назва ідентифікатора" #: ../text.py:200 msgid "Password" msgstr "Пароль" #: ../text.py:257 msgid "Help not available" msgstr "Довідка недоступна" #: ../text.py:258 msgid "No help is available for this step of the install." msgstr "Для цього кроку встановлення довідка недоступна." #: ../text.py:365 #, python-format msgid "Please enter your %(instkey)s" msgstr "Введіть свій %(instkey)s" #: ../text.py:382 tmp/instkey.glade.h:6 #, no-c-format, python-format msgid "Skip entering %(instkey)s" msgstr "Пропустити введення %(instkey)s" #: ../text.py:414 msgid "Save Crash Dump" msgstr "Збереження аварійного образу" #: ../text.py:469 ../loader2/lang.c:55 ../loader2/loader.c:153 #, c-format, python-format msgid "Welcome to %s" msgstr "Ласкаво просимо до %s" #: ../text.py:472 msgid "" " for help | between elements | selects | next screen" msgstr "" " довідка | між елементами | <Пробіл> вибір | наступний екран" #: ../text.py:474 msgid "" " / between elements | selects | next " "screen" msgstr "" " / між елементами | <Пробіл> вибір | наступний екран" #: ../upgrade.py:52 msgid "Proceed with upgrade?" msgstr "Продовжити оновлення?" #: ../upgrade.py:53 msgid "" "The file systems of the Linux installation you have chosen to upgrade have " "already been mounted. You cannot go back past this point. \n" "\n" msgstr "" "Файлові системи поточної установки Linux, що вибрана для оновлення, вже " "підключені. Ви не можете повернутися назад з цієї точки.\n" #: ../upgrade.py:57 msgid "Would you like to continue with the upgrade?" msgstr "Продовжити оновлення?" #: ../upgrade.py:93 msgid "Searching" msgstr "Пошук" #: ../upgrade.py:94 #, python-format msgid "Searching for %s installations..." msgstr "Пошук встановлень %s..." #: ../upgrade.py:149 ../upgrade.py:157 msgid "Dirty File Systems" msgstr "\"Брудні\" файлові системи" #: ../upgrade.py:150 #, python-format msgid "" "The following file systems for your Linux system were not unmounted " "cleanly. Please boot your Linux installation, let the file systems be " "checked and shut down cleanly to upgrade.\n" "%s" msgstr "" "Не всі файлові системи у вашій системі було правильно відключено. Завантажте " "систему Linux, дозвольте їй перевірити файлові системи та коректно завершіть " "роботу, після чого повторіть спробу оновлення.\n" "%s" #: ../upgrade.py:158 #, python-format msgid "" "The following file systems for your Linux system were not unmounted " "cleanly. Would you like to mount them anyway?\n" "%s" msgstr "" "Не всі файлові системи у вашій системі було правильно відключено. Підключити " "їх все одно?\n" "%s" #: ../upgrade.py:295 ../upgrade.py:301 msgid "Mount failed" msgstr "Помилка підключення" #: ../upgrade.py:296 msgid "" "One or more of the file systems listed in the /etc/fstab on your Linux " "system cannot be mounted. Please fix this problem and try to upgrade again." msgstr "" "Одна чи більше файлова система, з перелічених у файлі /etc/fstab вашої " "системи Linux, не може бути підключена. Усуньте цю проблему та повторіть " "спробу оновлення." #: ../upgrade.py:302 msgid "" "One or more of the file systems listed in the /etc/fstab of your Linux " "system are inconsistent and cannot be mounted. Please fix this problem and " "try to upgrade again." msgstr "" "Одна чи більше файлова система, з перелічених у файлі /etc/fstab вашої " "системи Linux, містить помилки та не може бути підключена. Усуньте цю " "проблему та повторіть спробу оновлення." #: ../upgrade.py:319 msgid "" "The following files are absolute symbolic links, which we do not support " "during an upgrade. Please change them to relative symbolic links and restart " "the upgrade.\n" "\n" msgstr "" "Наступні файли є абсолютними символічними посиланнями, які не підтримуються " "під час оновлення. Змініть їх на відносні символічні посилання та " "перезапустити оновлення.\n" "\n" #: ../upgrade.py:325 msgid "Absolute Symlinks" msgstr "Абсолютні символічні посилання" #: ../upgrade.py:336 msgid "" "The following are directories which should instead be symbolic links, which " "will cause problems with the upgrade. Please return them to their original " "state as symbolic links and restart the upgrade.\n" "\n" msgstr "" "Перелічені каталоги, які повинні бути символічними посиланнями, можуть " "викликати проблеми під час оновлення. Перетворіть їх знову на символічні " "посилання та перезапустіть оновлення.\n" "\n" #: ../upgrade.py:342 msgid "Invalid Directories" msgstr "Неправильні каталоги" #: ../upgrade.py:349 #, python-format msgid "%s not found" msgstr "%s не знайдено" #: ../urlinstall.py:37 msgid "Connecting..." msgstr "З'єднання..." #: ../urlinstall.py:76 #, python-format msgid "" "The file %s cannot be opened. This is due to a missing file or perhaps a " "corrupt package. Please verify your mirror contains all required packages, " "and try using a different one.\n" "\n" "If you exit, your system will be left in an inconsistent state that will " "likely require reinstallation.\n" "\n" msgstr "" "Не вдається відкрити файл %s. Можлива причина - відсутній файл або " "пошкоджений пакет. Перевірте, що дзеркало містить усі необхідні пакети або " "використовуйте інше дзеркало. \n" "\n" "При перезавантаженні система залишиться у нестабільному стані та вимагатиме " "перевстановлення.\n" "\n" #: ../vnc.py:49 msgid "Unable to Start X" msgstr "Не вдається запустити систему X" #: ../vnc.py:50 msgid "" "X was unable to start on your machine. Would you like to start VNC to " "connect to this computer from another computer and perform a graphical " "install or continue with a text mode install?" msgstr "" "Графічна система X не може запуститись на цьому комп'ютері. Бажаєте " "запустити VNC, щоб підключитись до цього комп'ютера з іншого комп'ютера та " "продовжити графічне встановлення, або ж продовжити встановлення у текстовому " "режимі?" #: ../vnc.py:57 ../vnc.py:60 msgid "Use text mode" msgstr "Використовувати текстовий режим" #: ../vnc.py:58 msgid "Start VNC" msgstr "Запускати VNC" #: ../vnc.py:68 msgid "VNC Configuration" msgstr "Налаштовування VNC" #: ../vnc.py:72 msgid "No password" msgstr "Без паролю" #: ../vnc.py:75 msgid "" "A password will prevent unauthorized listeners connecting and monitoring " "your installation progress. Please enter a password to be used for the " "installation" msgstr "" "Пароль запобігає несанкціонованим з'єднанням для підслуховування та контролю " "за процесом встановлення. Введіть пароль, який буде використовуватись при " "встановленні" #: ../vnc.py:83 ../textw/userauth_text.py:42 ../loader2/urls.c:460 msgid "Password:" msgstr "Пароль:" #: ../vnc.py:84 ../textw/userauth_text.py:43 msgid "Password (confirm):" msgstr "Пароль (підтвердження):" #: ../vnc.py:106 ../textw/userauth_text.py:64 msgid "Password Mismatch" msgstr "Паролі не співпадають" #: ../vnc.py:107 ../textw/userauth_text.py:65 msgid "The passwords you entered were different. Please try again." msgstr "Введені Вами паролі не співпадають. Повторіть спробу." #: ../vnc.py:112 ../textw/userauth_text.py:59 msgid "Password Length" msgstr "Довжина паролю" #: ../vnc.py:113 msgid "The password must be at least six characters long." msgstr "Пароль має складатися принаймні з 6 символів." #: ../vnc.py:143 msgid "VNC Password Error" msgstr "Паролю паролю VNC" #: ../vnc.py:144 msgid "" "You need to specify a vnc password of at least 6 characters long.\n" "\n" "Press to reboot your system.\n" msgstr "" "Необхідно вказати пароль vnc довжиною не менше ніж 6 символів.\n" "\n" "Натисніть для перезавантаження системи.\n" #: ../vnc.py:189 msgid "Starting VNC..." msgstr "Запуск VNC..." #: ../vnc.py:245 #, python-format msgid "%s %s installation on host %s" msgstr "Встановлення %s %s на вузлі %s" #: ../vnc.py:247 #, python-format msgid "%s %s installation" msgstr "Встановлення %s %s" #: ../vnc.py:267 msgid "Unable to set vnc password - using no password!" msgstr "Не вдається встановити пароль vnc - запуск без паролю!" #: ../vnc.py:268 msgid "Make sure your password is at least 6 characters in length." msgstr "Перевірте що довжина паролю не менше, ніж 6 символів." #: ../vnc.py:291 msgid "" "\n" "\n" "WARNING!!! VNC server running with NO PASSWORD!\n" "You can use the vncpassword= boot option\n" "if you would like to secure the server.\n" "\n" msgstr "" "\n" "\n" "Увага!!! Сервер VNC запущений БЕЗ ПАРОЛЮ!\n" "Якщо хочете забезпечити безпеку серверу, використовуйте\n" "параметр завантаження vncpassword=.\n" "\n" #: ../vnc.py:295 msgid "The VNC server is now running." msgstr "Службу VNC запущено." #: ../vnc.py:298 #, python-format msgid "Attempting to connect to vnc client on host %s..." msgstr "Спроба з'єднатись з vnc клієнтом на вузлі %s..." #: ../vnc.py:311 msgid "Connected!" msgstr "З'єднання встановлено!" #: ../vnc.py:316 msgid "Giving up attempting to connect after 50 tries!\n" msgstr "Припинено намагання з'єднатись після 50 невдалих спроб!\n" #: ../vnc.py:318 #, python-format msgid "Please manually connect your vnc client to %s to begin the install." msgstr "Щоб розпочати встановлення підключіть вручну ваш vnc-клієнт до %s." #: ../vnc.py:320 msgid "Please manually connect your vnc client to begin the install." msgstr "Щоб розпочати встановлення підключіть вручну ваш vnc-клієнт." #: ../vnc.py:324 msgid "Will try to connect again in 15 seconds..." msgstr "Спроба повторного з'єднання через 15 секунд..." #: ../vnc.py:332 #, python-format msgid "Please connect to %s to begin the install..." msgstr "підключіться до %s, щоб розпочати встановлення..." #: ../vnc.py:334 msgid "Please connect to begin the install..." msgstr "Підключіться, щоб розпочати встановлення..." #: ../yuminstall.py:62 #, python-format msgid "%s MB" msgstr "%s МБ" #: ../yuminstall.py:65 #, python-format msgid "%s KB" msgstr "%s кБ" #: ../yuminstall.py:68 #, python-format msgid "%s Byte" msgstr "%s байт" #: ../yuminstall.py:70 #, python-format msgid "%s Bytes" msgstr "%s байт" #: ../yuminstall.py:117 msgid "Processing" msgstr "Обробка" #: ../yuminstall.py:118 msgid "Preparing transaction from installation source..." msgstr "Підготовка транзакції з джерела встановлення... " #: ../yuminstall.py:148 #, python-format msgid "Installing %s (%s)\n" msgstr "Встановлення %s (%s)\n" #: ../yuminstall.py:185 #, python-format msgid "%s of %s packages completed" msgstr "%s з %s пакетів завершені" #: ../yuminstall.py:195 msgid "Finishing upgrade" msgstr "Завершення процесу оновлення" #: ../yuminstall.py:196 msgid "Finishing upgrade process. This may take a little while..." msgstr "Запускається процес оновлення. Це може зайняти декілька хвилин..." #: ../yuminstall.py:445 ../yuminstall.py:642 ../yuminstall.py:793 #: ../yuminstall.py:796 ../yuminstall.py:1012 ../yuminstall.py:1015 msgid "Re_boot" msgstr "_Перезавантаження" #: ../yuminstall.py:598 ../yuminstall.py:599 msgid "file conflicts" msgstr "конфлікти файлів" #: ../yuminstall.py:600 msgid "older package(s)" msgstr "старі пакети" #: ../yuminstall.py:601 msgid "insufficient disk space" msgstr "бракує місця на диску" #: ../yuminstall.py:602 msgid "insufficient disk inodes" msgstr "недостатня кількість inode на диску" #: ../yuminstall.py:603 msgid "package conflicts" msgstr "конфлікти пакетів" #: ../yuminstall.py:604 msgid "package already installed" msgstr "пакет вже встановлено" #: ../yuminstall.py:605 msgid "required package" msgstr "вимагається пакет" #: ../yuminstall.py:606 msgid "package for incorrect arch" msgstr "пакет з неправильною архітектурою" #: ../yuminstall.py:607 msgid "package for incorrect os" msgstr "пакет не для цієї операційної системи" #: ../yuminstall.py:621 msgid "You need more space on the following file systems:\n" msgstr "Потрібно більше місця на наступних файлових системах:\n" #: ../yuminstall.py:637 msgid "Error running transaction" msgstr "Помилка запуску транзакції" #: ../yuminstall.py:638 #, python-format msgid "" "There was an error running your transaction, for the following reason(s): %s" msgstr "При виконанні вашої транзакції виникла помилка з наступних причин: %s" #: ../yuminstall.py:733 msgid "Retrieving installation information..." msgstr "Читання інформації встановлення..." #: ../yuminstall.py:735 #, python-format msgid "Retrieving installation information for %s..." msgstr "Отримання інформації встановлення для %s..." #: ../yuminstall.py:763 ../yuminstall.py:1020 #, python-format msgid "" "Unable to read package metadata. This may be due to a missing repodata " "directory. Please ensure that your install tree has been correctly " "generated. %s" msgstr "" "Не вдається прочитати метадані пакету. Можлива причина - відсутність " "каталогу repodata. Переконайтесь, що ваше дерево встановлення сформовано " "правильно. %s" #: ../yuminstall.py:803 msgid "" "Unable to read group information from repositories. This is a problem with " "the generation of your install tree." msgstr "" "Неможливо прочитати інформацію про групи з репозиторіїв. Це проблема " "стосується генерування дерева встановлення." #: ../yuminstall.py:836 msgid "Uncategorized" msgstr "Поза категоріями" #: ../yuminstall.py:1045 #, python-format msgid "" "Your selected packages require %d MB of free space for installation, but you " "do not have enough available. You can change your selections or exit the " "installer." msgstr "" "Відібранні вами пакети вимагають для встановлення %d Мб вільного місця, але " "у вас недостатньо об'єму. Ви можете змінити ваш вибір або перезавантажити " "систему." #: ../yuminstall.py:1206 #, python-format msgid "" "You appear to be upgrading from a system which is too old to upgrade to this " "version of %s. Are you sure you wish to continue the upgrade process?" msgstr "" "Схоже, ви оновлюєте систему, яка занадто застара для того, щоб бути " "оновленою до цієї версії %s. Ви дійсно бажаєте продовжити оновлення?" #: ../yuminstall.py:1235 msgid "Install Starting" msgstr "Запуск встановлення" #: ../yuminstall.py:1236 msgid "Starting install process. This may take several minutes..." msgstr "Запускається процес встановлення. Це може зайняти декілька хвилин..." #: ../yuminstall.py:1252 msgid "Post Upgrade" msgstr "Після оновлення" #: ../yuminstall.py:1253 msgid "Performing post upgrade configuration..." msgstr "Виконується налаштовування після встановлення..." #: ../yuminstall.py:1255 msgid "Post Install" msgstr "Налаштовування після встановлення" #: ../yuminstall.py:1256 msgid "Performing post install configuration..." msgstr "Виконується налаштовування після встановлення..." #: ../yuminstall.py:1473 msgid "Installation Progress" msgstr "Процес встановлення" #: ../yuminstall.py:1508 msgid "Dependency Check" msgstr "Перевірка залежностей" #: ../yuminstall.py:1509 msgid "Checking dependencies in packages selected for installation..." msgstr "Перевірка залежностей вибраних для встановлення пакетів..." #: ../zfcp.py:43 msgid "You have not specified a device number or the number is invalid" msgstr "Ви не вказали номер пристрою, або номер пристрою - неправильний." #: ../zfcp.py:45 msgid "You have not specified a worldwide port name or the name is invalid." msgstr "Ви не вказали worldwide назву порта, або назва - неправильна." #: ../zfcp.py:47 msgid "You have not specified a FCP LUN or the number is invalid." msgstr "Ви не вказали FCP LUN, або номер - неправильний." #: ../iw/account_gui.py:26 msgid "Caps Lock is on." msgstr "Увімкнено Caps Lock." #: ../iw/account_gui.py:33 msgid "Set Root Password" msgstr "Пароль користувача root" #: ../iw/account_gui.py:48 ../iw/account_gui.py:56 ../iw/account_gui.py:63 #: ../iw/account_gui.py:72 ../textw/userauth_text.py:69 msgid "Error with Password" msgstr "Помилка пароля" #: ../iw/account_gui.py:49 msgid "" "You must enter your root password and confirm it by typing it a second time " "to continue." msgstr "" "Необхідно ввести пароль користувача root та підтвердити його, набравши " "другий раз." #: ../iw/account_gui.py:57 msgid "The passwords you entered were different. Please try again." msgstr "Введені паролі не співпадають. Спробуйте знову." #: ../iw/account_gui.py:64 msgid "The root password must be at least six characters long." msgstr "Пароль користувача root повинен містити принаймні 6 символів." #: ../iw/account_gui.py:73 ../textw/userauth_text.py:70 msgid "" "Requested password contains non-ASCII characters, which are not allowed." msgstr "" "Запитаний пароль містить символи, які не є символами ASCII. В паролях такі " "символи не допускаються." #: ../iw/account_gui.py:107 msgid "" "The root account is used for administering the system. Enter a password for " "the root user." msgstr "" "Обліковий рахунок користувача root використовується для адміністрування " "системи. Введіть пароль користувача root." #: ../iw/account_gui.py:122 msgid "Root _Password: " msgstr "_Пароль користувача root: " #: ../iw/account_gui.py:125 msgid "_Confirm: " msgstr "Під_твердження: " #: ../iw/autopart_type.py:155 msgid "Invalid Initiator Name" msgstr "Неправильна назва ініціатора" #: ../iw/autopart_type.py:156 msgid "You must provide an initiator name." msgstr "Треба вказати ім'я ініціатора." #: ../iw/autopart_type.py:178 msgid "Error with Data" msgstr "Помилка у даних" #: ../iw/autopart_type.py:286 ../textw/partition_text.py:1556 msgid "Remove all partitions on selected drives and create default layout" msgstr "" "Видалити всі розділи на вибраних пристроях та створити типову схему розмітки" #: ../iw/autopart_type.py:287 ../textw/partition_text.py:1557 msgid "Remove Linux partitions on selected drives and create default layout" msgstr "" "Видалити розділи Linux на вибраних дисках та створити типову схему розмітки" #: ../iw/autopart_type.py:288 ../textw/partition_text.py:1558 msgid "Use free space on selected drives and create default layout" msgstr "" "Використати вільний простір на вибраних дисках та створити типову схему " "розмітки" #: ../iw/autopart_type.py:289 ../textw/partition_text.py:1559 msgid "Create custom layout" msgstr "Створити власну схему розмітки" #: ../iw/blpasswidget.py:37 msgid "" "A boot loader password prevents users from changing options passed to the " "kernel. For greater system security, it is recommended that you set a " "password." msgstr "" "Пароль початкового завантажувача захищає від передавання користувачами " "параметрів ядру. Для підвищеної безпеки, рекомендується встановити пароль." #: ../iw/blpasswidget.py:42 msgid "_Use a boot loader password" msgstr "_Встановити пароль завантажувача" #: ../iw/blpasswidget.py:73 msgid "Change _password" msgstr "Змінити _пароль" #: ../iw/blpasswidget.py:96 msgid "Enter Boot Loader Password" msgstr "Введіть пароль завантажувача" #: ../iw/blpasswidget.py:102 msgid "" "Enter a boot loader password and then confirm it. (Note that your BIOS " "keymap may be different than the actual keymap you are used to.)" msgstr "" "Введіть пароль завантажувача та введіть підтвердження. (Зауважте, що " "розкладка клавіатури BIOS може відрізнятись від тієї, що використовується " "зараз.)" #: ../iw/blpasswidget.py:109 msgid "_Password:" msgstr "_Пароль:" #: ../iw/blpasswidget.py:115 msgid "Con_firm:" msgstr "_Підтвердження:" #: ../iw/blpasswidget.py:136 msgid "Passwords don't match" msgstr "Паролі не збігаються" #: ../iw/blpasswidget.py:137 ../textw/bootloader_text.py:439 msgid "Passwords do not match" msgstr "Паролі не збігаються" #: ../iw/blpasswidget.py:146 ../textw/bootloader_text.py:449 msgid "" "Your boot loader password is shorter than six characters. We recommend a " "longer boot loader password.\n" "\n" "Would you like to continue with this password?" msgstr "" "Пароль завантажувача містить менше ніж шість символів. Рекомендується " "вживати довший пароль.\n" "\n" "Залишити поточний пароль?" #: ../iw/bootloader_advanced_gui.py:27 msgid "Advanced Boot Loader Configuration" msgstr "Додаткові параметри завантажувача" #: ../iw/bootloader_advanced_gui.py:42 ../textw/bootloader_text.py:124 msgid "" "If LBA32 is not supported by your system's BIOS, forcing its use can prevent " "your machine from booting.\n" "\n" "Would you like to continue and force LBA32 mode?" msgstr "" "Примусове використання завантажувачем режиму LBA32, якщо він не " "підтримується BIOS, може призвести до нездатності системи завантажитись.\n" "Ви дійсно хочете увімкнути режим LBA32?" #: ../iw/bootloader_advanced_gui.py:48 msgid "Force LBA32" msgstr "Використовувати LBA32" #: ../iw/bootloader_advanced_gui.py:69 msgid "_Force LBA32 (not normally required)" msgstr "_Примусово LBA32 (зазвичай не вимагається)" #: ../iw/bootloader_advanced_gui.py:73 msgid "" "If you wish to add default options to the boot command, enter them into the " "'General kernel parameters' field." msgstr "" "Якщо ви бажаєте додати у командний рядок завантажувача додаткові параметри, " "введіть їх у полі 'Загальні параметри ядра'." #: ../iw/bootloader_advanced_gui.py:79 msgid "_General kernel parameters" msgstr "_Загальні параметри ядра" #: ../iw/bootloader_main_gui.py:30 ../textw/bootloader_text.py:42 #: ../textw/bootloader_text.py:107 ../textw/bootloader_text.py:164 #: ../textw/bootloader_text.py:282 ../textw/bootloader_text.py:391 msgid "Boot Loader Configuration" msgstr "Параметри завантажувача" #: ../iw/bootloader_main_gui.py:117 #, python-format msgid "The %s boot loader will be installed on /dev/%s." msgstr "Завантажувач %s буде встановлений на /dev/%s." #: ../iw/bootloader_main_gui.py:123 msgid "No boot loader will be installed." msgstr "Завантажувач не буде встановлений." #: ../iw/bootloader_main_gui.py:152 msgid "Configure advanced boot loader _options" msgstr "Настроїти додаткові _параметри завантажувача" #: ../iw/bootlocwidget.py:39 msgid "Install Boot Loader record on:" msgstr "Встановити завантажувач на:" #: ../iw/bootlocwidget.py:72 msgid "_Change Drive Order" msgstr "_Змінити порядок дисків" #: ../iw/bootlocwidget.py:84 msgid "Edit Drive Order" msgstr "Зміна порядку дисків" #: ../iw/bootlocwidget.py:89 msgid "" "Arrange the drives to be in the same order as used by the BIOS. Changing the " "drive order may be useful if you have multiple SCSI adapters or both SCSI " "and IDE adapters and want to boot from the SCSI device.\n" "\n" "Changing the drive order will change where the installation program locates " "the Master Boot Record (MBR)." msgstr "" "Систематизуйте диски у порядку, який використовує BIOS. Зміна порядку дисків " "корисна, якщо у вас є декілька контролерів SCSI, або одночасно SCSI та IDE, " "та ви бажаєте завантажуватись з пристрою SCSI.\n" "\n" "Від порядку дисків залежить, де саме програма встановлення розташує головний " "завантажувальний запис (MBR)." #: ../iw/confirm_gui.py:29 ../textw/confirm_text.py:35 #: ../textw/confirm_text.py:63 msgid "Reboot?" msgstr "Перезавантажити?" #: ../iw/confirm_gui.py:30 ../textw/confirm_text.py:36 #: ../textw/confirm_text.py:64 msgid "The system will be rebooted now." msgstr "Зараз систему буде перезавантажено." #: ../iw/confirm_gui.py:74 msgid "About to Install" msgstr "Початок встановлення" #: ../iw/confirm_gui.py:80 #, python-format msgid "Click next to begin installation of %s." msgstr "Натисніть \"Далі\", щоб почати встановлення %s." #: ../iw/confirm_gui.py:81 #, python-format msgid "" "A complete log of the installation can be found in the file '%s' after " "rebooting your system.\n" "\n" "A kickstart file containing the installation options selected can be found " "in the file '%s' after rebooting the system." msgstr "" "Повний журнал встановлення можна знайти у файлі %s після перезавантаження " "системи.\n" "\n" "Файл kickstart буде збережений у %s." #: ../iw/confirm_gui.py:88 msgid "About to Upgrade" msgstr "Початок оновлення" #: ../iw/confirm_gui.py:94 #, python-format msgid "Click next to begin upgrade of %s." msgstr "Клацніть \"Далі\", щоб почати оновлення %s." #: ../iw/confirm_gui.py:95 #, python-format msgid "" "A complete log of the upgrade can be found in the file '%s' after rebooting " "your system." msgstr "" "Повний протокол оновлення вашої системи після перевантаження буде у файлі \"%" "s\"." #: ../iw/congrats_gui.py:25 msgid "Congratulations" msgstr "Вітаємо" #: ../iw/congrats_gui.py:65 msgid "" "Press the \"Reboot\" button to reboot your system.\n" "\n" msgstr "" "Натисніть \"Перезавантажити\" для перевантаження системи.\n" "\n" #: ../iw/congrats_gui.py:69 #, python-format msgid "" "Congratulations, the installation is complete.\n" "\n" "%s%s" msgstr "" "Вітаємо, встановлення завершено.\n" "\n" "%s%s" #: ../iw/driveorderwidget.py:44 msgid "Drive" msgstr "Пристрій" #: ../iw/driveorderwidget.py:44 ../textw/partition_text.py:1462 msgid "Size" msgstr "Розмір" #: ../iw/driveorderwidget.py:44 msgid "Model" msgstr "Модель" #: ../iw/examine_gui.py:28 msgid "Upgrade Examine" msgstr "Оновлення перевіряє" #: ../iw/examine_gui.py:50 #, python-format msgid "_Install %s" msgstr "_Встановити %s" #: ../iw/examine_gui.py:52 msgid "" "Choose this option to freshly install your system. Existing software and " "data may be overwritten depending on your configuration choices." msgstr "" "Виберіть цей параметр для встановлення чистої системи. В залежності від " "вибраних параметрів можуть бути перезаписані існуюче ПЗ та дані." #: ../iw/examine_gui.py:56 msgid "_Upgrade an existing installation" msgstr "_Оновити існуючу систему" #: ../iw/examine_gui.py:58 #, python-format msgid "" "Choose this option if you would like to upgrade your existing %s system. " "This option preserves the existing data on your drives." msgstr "" "Виберіть цей пункт, якщо бажаєте оновити існуючу систему %s. Дані на ваших " "дисках будуть збережені." #: ../iw/examine_gui.py:105 ../iw/pixmapRadioButtonGroup_gui.py:197 msgid "The following installed system will be upgraded:" msgstr "Наступна встановлена система буде оновлена:" #: ../iw/examine_gui.py:118 msgid "Unknown Linux system" msgstr "Невідома система Linux" #: ../iw/language_gui.py:24 ../textw/language_text.py:37 msgid "Language Selection" msgstr "Вибір мови" #: ../iw/language_gui.py:67 ../textw/language_text.py:38 ../loader2/lang.c:367 msgid "What language would you like to use during the installation process?" msgstr "Яку мову ви хотіли б використовувати під час встановлення?" #: ../iw/lvm_dialog_gui.py:115 ../iw/lvm_dialog_gui.py:162 #: ../iw/lvm_dialog_gui.py:173 ../iw/lvm_dialog_gui.py:213 #: ../iw/lvm_dialog_gui.py:287 ../iw/lvm_dialog_gui.py:601 #: ../iw/lvm_dialog_gui.py:669 ../iw/lvm_dialog_gui.py:880 #: ../textw/partition_text.py:1313 ../textw/partition_text.py:1332 msgid "Not enough space" msgstr "Недостатньо місця" #: ../iw/lvm_dialog_gui.py:116 msgid "" "The physical extent size cannot be changed because otherwise the space " "required by the currently defined logical volumes will be increased to more " "than the available space." msgstr "" "Розмір фізичного екстенту не можна змінити, тому що у іншому випадку " "простір, виділений логічним томам, перевищив би доступний вільний простір." #: ../iw/lvm_dialog_gui.py:125 msgid "Confirm Physical Extent Change" msgstr "Підтвердіть зміну фізичного екстенту" #: ../iw/lvm_dialog_gui.py:126 msgid "" "This change in the value of the physical extent will require the sizes of " "the current logical volume requests to be rounded up in size to an integer " "multiple of the physical extent.\n" "\n" "This change will take effect immediately." msgstr "" "Ця зміна розміру фізичного екстенту вимагає, щоб розміри поточних логічних " "томів були округлені до значення, кратного фізичному екстенту.\n" "\n" "Ця зміна набере сили негайно." #: ../iw/lvm_dialog_gui.py:135 ../iw/lvm_dialog_gui.py:195 #: ../iw/network_gui.py:143 ../iw/network_gui.py:147 ../iw/network_gui.py:167 msgid "C_ontinue" msgstr "_Продовжити" #: ../iw/lvm_dialog_gui.py:163 #, python-format msgid "" "The physical extent size cannot be changed because the value selected (%" "10.2f MB) is larger than the smallest physical volume (%10.2f MB) in the " "volume group." msgstr "" "розмір фізичного екстенту не може бути змінений, тому що вибрана величина (%" "10.2f MB) перевищує розмір найменшого фізичного тому (%10.2f MB) в групі " "томів." #: ../iw/lvm_dialog_gui.py:174 #, python-format msgid "" "The physical extent size cannot be changed because the value selected (%" "10.2f MB) is too large compared to the size of the smallest physical volume " "(%10.2f MB) in the volume group." msgstr "" "розмір фізичного екстенту не може бути змінений, тому що вибрана величина (%" "10.2f MB) занадто велика у порівнянні з розміром найменшого фізичного тому (%" "10.2f MB) в групі томів." #: ../iw/lvm_dialog_gui.py:188 msgid "Too small" msgstr "Надто мало місця" #: ../iw/lvm_dialog_gui.py:189 msgid "" "This change in the value of the physical extent will waste substantial space " "on one or more of the physical volumes in the volume group." msgstr "" "Ця зміна фізичного екстенту призведе до втрати суттєвої частини простору не " "одному або декількох фізичних томах у групі томів." #: ../iw/lvm_dialog_gui.py:214 #, python-format msgid "" "The physical extent size cannot be changed because the resulting maximum " "logical volume size (%10.2f MB) is smaller than one or more of the currently " "defined logical volumes." msgstr "" "Розмір фізичного екстенту не можна змінити, тому що отриманий максимальний " "розмір логічного тому (%10.2f MB) буде менший за розмір одного чи декількох " "визначених логічних томів." #: ../iw/lvm_dialog_gui.py:288 msgid "" "You cannot remove this physical volume because otherwise the volume group " "will be too small to hold the currently defined logical volumes." msgstr "" "Не можна видаляти цей фізичний том, тому що розмір групи томів був би надто " "малий для розміщення визначених логічних томів." #: ../iw/lvm_dialog_gui.py:368 ../textw/partition_text.py:1151 msgid "Make Logical Volume" msgstr "Створення логічного тому" #: ../iw/lvm_dialog_gui.py:371 #, python-format msgid "Edit Logical Volume: %s" msgstr "Правка логічного тому: %s" #: ../iw/lvm_dialog_gui.py:373 ../textw/partition_text.py:1149 msgid "Edit Logical Volume" msgstr "Правка логічного тому" #: ../iw/lvm_dialog_gui.py:386 ../iw/partition_dialog_gui.py:293 #: ../iw/raid_dialog_gui.py:280 msgid "_Mount Point:" msgstr "Точка _монтування:" #: ../iw/lvm_dialog_gui.py:394 ../iw/raid_dialog_gui.py:289 msgid "_File System Type:" msgstr "Тип _файлової системи:" #: ../iw/lvm_dialog_gui.py:404 ../iw/partition_dialog_gui.py:312 #: ../iw/raid_dialog_gui.py:299 msgid "Original File System Type:" msgstr "Поточний тип файлової системи:" #: ../iw/lvm_dialog_gui.py:409 ../iw/partition_dialog_gui.py:323 #: ../iw/raid_dialog_gui.py:304 msgid "Unknown" msgstr "Невідомий" #: ../iw/lvm_dialog_gui.py:415 ../iw/partition_dialog_gui.py:358 #: ../iw/raid_dialog_gui.py:310 msgid "Original File System Label:" msgstr "Поточна позначка файлової системи:" #: ../iw/lvm_dialog_gui.py:424 msgid "_Logical Volume Name:" msgstr "_Назва логічного тому:" #: ../iw/lvm_dialog_gui.py:432 ../textw/partition_text.py:298 msgid "Logical Volume Name:" msgstr "Назва логічного тому:" #: ../iw/lvm_dialog_gui.py:440 ../iw/partition_dialog_gui.py:370 msgid "_Size (MB):" msgstr "_Розмір (Мб):" #: ../iw/lvm_dialog_gui.py:446 ../iw/partition_dialog_gui.py:387 #: ../iw/partition_dialog_gui.py:430 ../textw/partition_text.py:313 #: ../textw/partition_text.py:390 ../textw/partition_text.py:473 #: ../textw/partition_text.py:581 msgid "Size (MB):" msgstr "Розмір (Мб):" #: ../iw/lvm_dialog_gui.py:461 #, python-format msgid "(Max size is %s MB)" msgstr "(Макс. розмір %s MB)" #: ../iw/lvm_dialog_gui.py:522 ../textw/partition_text.py:1302 msgid "Illegal size" msgstr "Неприпустимий розмір" #: ../iw/lvm_dialog_gui.py:523 ../textw/partition_text.py:1303 msgid "The requested size as entered is not a valid number greater than 0." msgstr "Введений розмір не є дійсним числом більшим ніж 0." #: ../iw/lvm_dialog_gui.py:556 msgid "Mount point in use" msgstr "Точка монтування використовується" #: ../iw/lvm_dialog_gui.py:557 #, python-format msgid "The mount point \"%s\" is in use. Please pick another." msgstr "Точка монтування \"%s\" вже використовується, виберіть іншу." #: ../iw/lvm_dialog_gui.py:568 ../textw/partition_text.py:1273 msgid "Illegal Logical Volume Name" msgstr "Неприпустима назва логічного тому" #: ../iw/lvm_dialog_gui.py:587 ../textw/partition_text.py:1290 msgid "Illegal logical volume name" msgstr "Неприпустима назва логічного тому" #: ../iw/lvm_dialog_gui.py:588 ../textw/partition_text.py:1291 #, python-format msgid "The logical volume name \"%s\" is already in use. Please pick another." msgstr "Назва логічного тому \"%s\" вже використовується. Виберіть іншу назву." #: ../iw/lvm_dialog_gui.py:602 #, python-format msgid "" "The current requested size (%10.2f MB) is larger than the maximum logical " "volume size (%10.2f MB). To increase this limit you can create more Physical " "Volumes from unpartitioned disk space and add them to this Volume Group." msgstr "" "Запитаний розмір (%10.2f MB) перевищує максимальний розмір логічного тому (%" "10.2f MB). Щоб збільшити це обмеження можна створити додаткові фізичні томи " "на вільному дисковому просторі та додати їх до групи томів." #: ../iw/lvm_dialog_gui.py:646 ../iw/partition_dialog_gui.py:179 #: ../iw/partition_dialog_gui.py:191 ../iw/partition_dialog_gui.py:239 #: ../iw/raid_dialog_gui.py:207 ../textw/partition_text.py:922 #: ../textw/partition_text.py:944 ../textw/partition_text.py:1119 #: ../textw/partition_text.py:1352 msgid "Error With Request" msgstr "Помилка при запиті" #: ../iw/lvm_dialog_gui.py:670 ../iw/lvm_dialog_gui.py:881 #, python-format msgid "" "The logical volumes you have configured require %d MB, but the volume group " "only has %d MB. Please either make the volume group larger or make the " "logical volume(s) smaller." msgstr "" "Вказані вами логічні томи потребують %d МБ, але група томів має лише %d МБ. " "Необхідно або збільшити розмір групи томів, або зменшити логічний том (томи)." #: ../iw/lvm_dialog_gui.py:720 msgid "No free slots" msgstr "Немає вільних слотів" #: ../iw/lvm_dialog_gui.py:721 #, python-format msgid "You cannot create more than %s logical volumes per volume group." msgstr "Ви не можете створювати більше ніж %s логічних томів у групі томів." #: ../iw/lvm_dialog_gui.py:727 msgid "No free space" msgstr "Недостатньо вільного простору" #: ../iw/lvm_dialog_gui.py:728 msgid "" "There is no room left in the volume group to create new logical volumes. To " "add a logical volume you must reduce the size of one or more of the " "currently existing logical volumes" msgstr "" "В групі томів не вистачає місця для створення нових логічних томів. Щоб " "додати логічний том, треба зменшити розмір одного чи декількох існуючих " "логічних томів" #: ../iw/lvm_dialog_gui.py:756 #, python-format msgid "Are you sure you want to delete the logical volume \"%s\"?" msgstr "Ви справді бажаєте видалити логічний том \"%s\"?" #: ../iw/lvm_dialog_gui.py:892 msgid "Invalid Volume Group Name" msgstr "Неприпустима назва групи томів" #: ../iw/lvm_dialog_gui.py:903 msgid "Name in use" msgstr "Назва вже використовується" #: ../iw/lvm_dialog_gui.py:904 #, python-format msgid "The volume group name \"%s\" is already in use. Please pick another." msgstr "Назва групи томів \"%s\" вже використовується, вкажіть іншу назву." #: ../iw/lvm_dialog_gui.py:947 msgid "Not enough physical volumes" msgstr "Недостатньо фізичних томів" #: ../iw/lvm_dialog_gui.py:948 msgid "" "At least one unused physical volume partition is needed to create an LVM " "Volume Group.\n" "\n" "Create a partition or RAID array of type \"physical volume (LVM)\" and then " "select the \"LVM\" option again." msgstr "" "Для створення групи томів LVM потрібен принаймні один невикористаний розділ " "фізичного тому.\n" "\n" "Створіть розділ або масив RAID типу \"фізичний том (LVM)\", після чого знову " "виберіть параметр \"LVM\"." #: ../iw/lvm_dialog_gui.py:959 msgid "Make LVM Volume Group" msgstr "Створення групи томів LVM" #: ../iw/lvm_dialog_gui.py:962 #, python-format msgid "Edit LVM Volume Group: %s" msgstr "Правка групи томів LVM: %s" #: ../iw/lvm_dialog_gui.py:964 msgid "Edit LVM Volume Group" msgstr "Правка групи томів LVM" #: ../iw/lvm_dialog_gui.py:980 msgid "_Volume Group Name:" msgstr "_Назва групи томів:" #: ../iw/lvm_dialog_gui.py:988 msgid "Volume Group Name:" msgstr "Назва групи томів:" #: ../iw/lvm_dialog_gui.py:996 msgid "_Physical Extent:" msgstr "_Фізичний екстент:" #: ../iw/lvm_dialog_gui.py:1011 msgid "Physical Volumes to _Use:" msgstr "Фізичні _томи:" #: ../iw/lvm_dialog_gui.py:1017 msgid "Used Space:" msgstr "Використано:" #: ../iw/lvm_dialog_gui.py:1034 msgid "Free Space:" msgstr "Вільний простір:" #: ../iw/lvm_dialog_gui.py:1052 msgid "Total Space:" msgstr "Загальний розмір: " #: ../iw/lvm_dialog_gui.py:1081 msgid "Logical Volume Name" msgstr "Назва логічного тому" #: ../iw/lvm_dialog_gui.py:1084 ../iw/partition_gui.py:364 #: ../iw/upgrade_swap_gui.py:136 ../textw/partition_text.py:1462 #: ../textw/upgrade_text.py:106 msgid "Mount Point" msgstr "Точка монтування" #: ../iw/lvm_dialog_gui.py:1087 ../iw/partition_gui.py:369 msgid "Size (MB)" msgstr "Розмір (Мб)" #: ../iw/lvm_dialog_gui.py:1101 ../iw/osbootwidget.py:96 msgid "_Add" msgstr "_Додати" #: ../iw/lvm_dialog_gui.py:1104 ../iw/network_gui.py:448 #: ../iw/osbootwidget.py:100 ../iw/partition_gui.py:1352 msgid "_Edit" msgstr "_Правка" #: ../iw/lvm_dialog_gui.py:1119 msgid "Logical Volumes" msgstr "Логічні томи" #: ../iw/mouse_gui.py:24 msgid "Mouse Configuration" msgstr "Параметри миші" #: ../iw/mouse_gui.py:77 ../textw/mouse_text.py:20 msgid "/dev/ttyS0 (COM1 under DOS)" msgstr "/dev/ttyS0 (COM1 у DOS)" #: ../iw/mouse_gui.py:78 ../textw/mouse_text.py:21 msgid "/dev/ttyS1 (COM2 under DOS)" msgstr "/dev/ttyS1 (COM2 у DOS)" #: ../iw/mouse_gui.py:79 ../textw/mouse_text.py:22 msgid "/dev/ttyS2 (COM3 under DOS)" msgstr "/dev/ttyS2 (COM3 у DOS)" #: ../iw/mouse_gui.py:80 ../textw/mouse_text.py:23 msgid "/dev/ttyS3 (COM4 under DOS)" msgstr "/dev/ttyS3 (COM4 у DOS)" #: ../iw/mouse_gui.py:90 ../iw/osbootwidget.py:157 msgid "_Device" msgstr "_Пристрій" #: ../iw/mouse_gui.py:136 msgid "_Model" msgstr "_Модель" #: ../iw/mouse_gui.py:234 msgid "_Emulate 3 buttons" msgstr "_Імітувати 3 кнопки" #: ../iw/mouse_gui.py:249 msgid "Select the appropriate mouse for the system." msgstr "Виберіть відповідний тип миші." #: ../iw/netconfig_dialog.py:137 #, python-format msgid "" "An error occurred converting the value entered for \"%s\":\n" "%s" msgstr "" "Помилка при перетворенні значення для \"%s\":\n" "%s" #: ../iw/netconfig_dialog.py:139 ../iw/netconfig_dialog.py:148 #: ../iw/network_gui.py:142 ../iw/network_gui.py:146 ../iw/network_gui.py:150 #: ../iw/network_gui.py:154 ../iw/network_gui.py:162 ../iw/network_gui.py:167 #: ../textw/network_text.py:47 ../textw/network_text.py:52 #: ../textw/network_text.py:58 msgid "Error With Data" msgstr "Помилка у даних" #: ../iw/netconfig_dialog.py:147 ../iw/network_gui.py:155 #: ../textw/network_text.py:48 #, python-format msgid "A value is required for the field %s." msgstr "Необхідно вказати значення поля %s." #: ../iw/netconfig_dialog.py:169 msgid "Dynamic IP" msgstr "Динамічний IP" #: ../iw/netconfig_dialog.py:170 ../loader2/net.c:413 ../loader2/net.c:830 #, c-format, python-format msgid "Sending request for IP information for %s..." msgstr "Надсилається запит конфігурації IP для %s..." #: ../iw/netconfig_dialog.py:191 ../iw/netconfig_dialog.py:194 #: ../textw/network_text.py:88 tmp/netpostconfig.glade.h:12 msgid "IP Address" msgstr "Адреса IP" #: ../iw/netconfig_dialog.py:201 ../iw/netconfig_dialog.py:204 msgid "Netmask" msgstr "Маска підмережі" #: ../iw/netconfig_dialog.py:211 msgid "IPv4 CIDR prefix must be between 0 and 32." msgstr "Префікс IPv4 CIDR повинен бути у межах від 0 до 32" #: ../iw/netconfig_dialog.py:212 ../iw/netconfig_dialog.py:218 #: ../iw/netconfig_dialog.py:226 ../iw/netconfig_dialog.py:229 msgid "IPv4 Network Mask" msgstr "Маска мережі IPv4" #: ../iw/netconfig_dialog.py:235 ../iw/netconfig_dialog.py:238 #: ../iw/network_gui.py:27 ../iw/network_gui.py:524 msgid "Gateway" msgstr "Шлюз" #: ../iw/netconfig_dialog.py:245 msgid "Nameserver" msgstr "DNS сервер" #: ../iw/netconfig_dialog.py:255 msgid "Error configuring network device:" msgstr "Помилка при налаштовуванні мережного інтерфейсу:" #: ../iw/netconfig_dialog.py:268 msgid "Error configuring network device" msgstr "Помилка при налаштовуванні мережного інтерфейсу" #: ../iw/network_gui.py:27 ../iw/network_gui.py:526 msgid "Primary DNS" msgstr "Первинний DNS" #: ../iw/network_gui.py:27 ../iw/network_gui.py:528 msgid "Secondary DNS" msgstr "Вторинний DNS" #: ../iw/network_gui.py:28 msgid "_Gateway" msgstr "_Шлюз" #: ../iw/network_gui.py:28 msgid "_Primary DNS" msgstr "_Первинний DNS" #: ../iw/network_gui.py:28 msgid "_Secondary DNS" msgstr "_Вторинний DNS" #: ../iw/network_gui.py:31 ../textw/network_text.py:527 msgid "Network Configuration" msgstr "Налаштовування мережі" #: ../iw/network_gui.py:143 msgid "" "You have not specified a hostname. Depending on your network environment " "this may cause problems later." msgstr "" "Ви не вказали назву комп'ютера. В залежності від мережного оточення це може " "призвести до виникнення проблем у майбутньому." #: ../iw/network_gui.py:147 #, python-format msgid "" "You have not specified the field \"%s\". Depending on your network " "environment this may cause problems later." msgstr "" "Ви лишили незаповненим поле \"%s\". В залежності від мережного оточення це " "може призвести до виникнення проблем у майбутньому." #: ../iw/network_gui.py:151 ../textw/network_text.py:817 #, python-format msgid "" "The hostname \"%s\" is not valid for the following reason:\n" "\n" "%s" msgstr "" "Назва комп'ютера \"%s\" не є правильною з наступних причин:\n" "\n" "%s" #: ../iw/network_gui.py:158 ../textw/network_text.py:38 #, python-format msgid "Error With %s Data" msgstr "Помилка у даних %s" #: ../iw/network_gui.py:159 ../textw/network_text.py:39 #: ../textw/network_text.py:590 ../textw/network_text.py:594 #: ../textw/welcome_text.py:22 #, python-format msgid "%s" msgstr "%s" #: ../iw/network_gui.py:163 ../textw/network_text.py:59 msgid "The IPv4 information you have entered is invalid." msgstr "Введено неправильну інформацію IPv4." #: ../iw/network_gui.py:167 msgid "" "You have no active network devices. Your system will not be able to " "communicate over a network by default without at least one device active." msgstr "" "У вас немає активних мережних пристроїв. Ваша система не зможе працювати в " "мережі без хоча б одного одного активного мережного пристрою." #: ../iw/network_gui.py:292 ../iw/network_gui.py:306 msgid "Disabled" msgstr "Вимкнено" #: ../iw/network_gui.py:389 msgid "Active on Boot" msgstr "Активізувати при завантаженні" #: ../iw/network_gui.py:391 ../iw/osbootwidget.py:67 #: ../iw/partition_gui.py:363 ../textw/bootloader_text.py:192 #: ../textw/bootloader_text.py:258 ../textw/mouse_text.py:38 #: ../textw/partition_text.py:1462 msgid "Device" msgstr "Пристрій" #: ../iw/network_gui.py:393 msgid "IPv4/Netmask" msgstr "IPv4/маска" #: ../iw/network_gui.py:395 msgid "IPv6/Prefix" msgstr "IPv4/префікс" #: ../iw/network_gui.py:455 msgid "Network Devices" msgstr "Мережні пристрої" #: ../iw/network_gui.py:466 msgid "Set the hostname:" msgstr "Встановити назву комп'ютера:" #: ../iw/network_gui.py:471 msgid "_automatically via DHCP" msgstr "_автоматично через DHCP" #: ../iw/network_gui.py:478 msgid "_manually" msgstr "в_ручну" #: ../iw/network_gui.py:483 msgid "(e.g., host.domain.com)" msgstr "(напр. host.domain.com)" #: ../iw/network_gui.py:489 msgid "Hostname" msgstr "Назва комп'ютера" #: ../iw/network_gui.py:533 msgid "Miscellaneous Settings" msgstr "Додаткові параметри" #: ../iw/network_gui.py:621 msgid "Edit Device " msgstr "Змінити пристрій " #: ../iw/network_gui.py:625 msgid "Unknown Ethernet Device" msgstr "Невідомий пристрій Ethernet" #: ../iw/network_gui.py:631 msgid "unknown" msgstr "Невідомий" #: ../iw/network_gui.py:633 msgid "Hardware address: " msgstr "Апаратна адреса: " #: ../iw/network_gui.py:769 ../textw/network_text.py:223 ../loader2/net.c:791 msgid "Missing Protocol" msgstr "Відсутній протокол" #: ../iw/network_gui.py:770 ../textw/network_text.py:224 msgid "You must select at least IPv4 or IPv6 support." msgstr "Необхідно вибрати принаймні один протокол (IPv4 чи IPv6)." #: ../iw/network_gui.py:793 ../iw/network_gui.py:834 ../iw/network_gui.py:840 #: ../textw/network_text.py:69 ../loader2/net.c:97 msgid "Invalid Prefix" msgstr "Некоректний префікс" #: ../iw/network_gui.py:794 msgid "IPv4 prefix must be between 0 and 32." msgstr "Префікс IPv4 повинен бути у межах від 0 до 32" #: ../iw/network_gui.py:835 ../iw/network_gui.py:841 msgid "IPv6 prefix must be between 0 and 128." msgstr "Префікс IPv6 повинен бути у межах від 0 до 128" #: ../iw/osbootwidget.py:43 msgid "" "You can configure the boot loader to boot other operating systems by " "selecting from the list. To add an operating systems that was not " "automatically detected, click 'Add.' To change the operating system booted " "by default, select 'Default' next to the desired operating system." msgstr "" "Ви можете налаштувати завантажувач для завантаження інших операційних " "систем. Це дозволить вибрати операційну систему зі списку при завантаженні. " "Щоб додати іншу операційну систему, яку не було визначено автоматично, " "натисніть кнопку \"Додати\". Щоб вибрати типову ОС, яка завантажуватиметься, " "встановіть параметр \"Типово\" для цієї ОС." #: ../iw/osbootwidget.py:67 ../textw/bootloader_text.py:258 msgid "Default" msgstr "Типово" #: ../iw/osbootwidget.py:67 msgid "Label" msgstr "Позначка" #: ../iw/osbootwidget.py:130 msgid "Image" msgstr "Образ" #: ../iw/osbootwidget.py:137 msgid "" "Enter a label for the boot loader menu to display. The device (or hard drive " "and partition number) is the device from which it boots." msgstr "" "Введіть позначку, яка відображатиметься в меню початкового завантажувача. " "Пристрій (жорсткий диск або номер розділу) - це пристрій, з якого буде " "завантажуватись система." #: ../iw/osbootwidget.py:149 msgid "_Label" msgstr "П_означка" #: ../iw/osbootwidget.py:188 msgid "Default Boot _Target" msgstr "Типовий образ _завантаження" #: ../iw/osbootwidget.py:217 msgid "You must specify a label for the entry" msgstr "Необхідно вказати позначку елементу" #: ../iw/osbootwidget.py:226 msgid "Boot label contains illegal characters" msgstr "Позначка завантаження містить неприпустимі символи" #: ../iw/osbootwidget.py:250 msgid "Duplicate Label" msgstr "Однакові позначки" #: ../iw/osbootwidget.py:251 msgid "This label is already in use for another boot entry." msgstr "Ця позначка використовується для іншого елементу." #: ../iw/osbootwidget.py:264 msgid "Duplicate Device" msgstr "Пристрій використовується" #: ../iw/osbootwidget.py:265 msgid "This device is already being used for another boot entry." msgstr "Цей пристрій вже використовується для іншого елементу." #: ../iw/osbootwidget.py:329 ../textw/bootloader_text.py:341 msgid "Cannot Delete" msgstr "Неможливо видалити" #: ../iw/osbootwidget.py:330 ../textw/bootloader_text.py:342 #, python-format msgid "" "This boot target cannot be deleted because it is for the %s system you are " "about to install." msgstr "" "Цю ціль завантаження видалити не можна, тому вона - система %s яку ви " "встановлюєте." #: ../iw/partition_dialog_gui.py:58 msgid "Additional Size Options" msgstr "Додаткові параметри розміру" #: ../iw/partition_dialog_gui.py:63 msgid "_Fixed size" msgstr "_Незмінний розмір" #: ../iw/partition_dialog_gui.py:65 msgid "Fill all space _up to (MB):" msgstr "Заповнити весь простір д_о (МБ):" #: ../iw/partition_dialog_gui.py:75 msgid "Fill to maximum _allowable size" msgstr "Заповнити весь _наявний простір" #: ../iw/partition_dialog_gui.py:180 msgid "The end cylinder must be greater than the start cylinder." msgstr "Кінцевий циліндр не може бути більшим ніж початковий циліндр." #: ../iw/partition_dialog_gui.py:270 ../textw/partition_text.py:723 msgid "Add Partition" msgstr "Додавання розділу" #: ../iw/partition_dialog_gui.py:273 #, python-format msgid "Edit Partition: /dev/%s" msgstr "Правка розділу: /dev/%s" #: ../iw/partition_dialog_gui.py:275 msgid "Edit Partition" msgstr "Правка розділу" #: ../iw/partition_dialog_gui.py:302 msgid "File System _Type:" msgstr "_Тип ФС:" #: ../iw/partition_dialog_gui.py:334 msgid "Allowable _Drives:" msgstr "Доступні _пристрої:" #: ../iw/partition_dialog_gui.py:349 msgid "Drive:" msgstr "Пристрій:" #: ../iw/partition_dialog_gui.py:393 msgid "_Start Cylinder:" msgstr "По_чатковий циліндр:" #: ../iw/partition_dialog_gui.py:411 msgid "_End Cylinder:" msgstr "_Кінцевий циліндр:" #: ../iw/partition_dialog_gui.py:463 msgid "Force to be a _primary partition" msgstr "Зробити _первинним розділом" #: ../iw/partition_gui.py:314 #, python-format msgid "Drive %s (Geom: %s/%s/%s) (Model: %s)" msgstr "Пристрій %s (Геом: %s/%s/%s) (Модель: %s)" #: ../iw/partition_gui.py:321 #, python-format msgid "Drive %s (%-0.f MB) (Model: %s)" msgstr "Пристрій %s (%-0.f Мб) (Модель: %s)" #: ../iw/partition_gui.py:365 ../textw/partition_text.py:1462 msgid "Type" msgstr "Тип" #: ../iw/partition_gui.py:370 ../textw/partition_text.py:1462 msgid "Start" msgstr "Початок" #: ../iw/partition_gui.py:371 ../textw/partition_text.py:1462 msgid "End" msgstr "Кінець" #: ../iw/partition_gui.py:408 msgid "" "Mount Point/\n" "RAID/Volume" msgstr "" "Точка монт./\n" "RAID/Том" #: ../iw/partition_gui.py:410 msgid "" "Size\n" "(MB)" msgstr "" "Розмір\n" "(МБ)" #: ../iw/partition_gui.py:542 ../textw/partition_text.py:1456 msgid "Partitioning" msgstr "Розподіл" #: ../iw/partition_gui.py:633 msgid "" "The partitioning scheme you requested caused the following critical errors." msgstr "Обрана схема розподілу диску викликає наступні критичні помилки." #: ../iw/partition_gui.py:635 #, python-format msgid "" "You must correct these errors before you continue your installation of %s." msgstr "Ці помилки повинні бути виправлені перед продовженням встановлення %s." #: ../iw/partition_gui.py:641 msgid "Partitioning Errors" msgstr "Помилки розподілу" #: ../iw/partition_gui.py:647 msgid "The partitioning scheme you requested generated the following warnings." msgstr "Обрана схема розподілу викликала наступні попередження." #: ../iw/partition_gui.py:649 msgid "Would you like to continue with your requested partitioning scheme?" msgstr "Продовжити з поточною схемою розподілу?" #: ../iw/partition_gui.py:654 msgid "Partitioning Warnings" msgstr "Попередження при розподілі" #: ../iw/partition_gui.py:676 msgid "Format Warnings" msgstr "Попередження при форматуванні" #: ../iw/partition_gui.py:681 msgid "_Format" msgstr "_Форматувати" #: ../iw/partition_gui.py:718 msgid "LVM Volume Groups" msgstr "Групи томів LVM" #: ../iw/partition_gui.py:753 msgid "RAID Devices" msgstr "Пристрої RAID" #: ../iw/partition_gui.py:781 ../iw/partition_gui.py:907 #: ../textw/partition_text.py:107 ../textw/partition_text.py:171 msgid "None" msgstr "Немає" #: ../iw/partition_gui.py:799 ../loader2/hdinstall.c:265 msgid "Hard Drives" msgstr "Жорсткі диски" #: ../iw/partition_gui.py:870 ../textw/partition_text.py:153 #: ../textw/partition_text.py:192 msgid "Free space" msgstr "Вільний простір" #: ../iw/partition_gui.py:872 ../textw/partition_text.py:155 msgid "Extended" msgstr "Розширений" #: ../iw/partition_gui.py:874 ../textw/partition_text.py:157 msgid "software RAID" msgstr "програмний RAID" #: ../iw/partition_gui.py:909 msgid "Free" msgstr "Вільно" #: ../iw/partition_gui.py:998 ../textw/partition_text.py:240 #, python-format msgid "Could not allocate requested partitions: %s." msgstr "Не вдається розподілити запитані розділи: %s." #: ../iw/partition_gui.py:1007 #, python-format msgid "Warning: %s." msgstr "Увага: %s." #: ../iw/partition_gui.py:1189 ../iw/partition_gui.py:1203 msgid "Not supported" msgstr "Не підтримується" #: ../iw/partition_gui.py:1190 msgid "LVM is NOT supported on this platform." msgstr "LVM не підтримуються на цій платформі." #: ../iw/partition_gui.py:1204 msgid "Software RAID is NOT supported on this platform." msgstr "Програмний RAID не підтримуються на цій платформі." #: ../iw/partition_gui.py:1211 msgid "No RAID minor device numbers available" msgstr "Немає доступних молодших пристроїв (minor devices) RAID" #: ../iw/partition_gui.py:1212 msgid "" "A software RAID device cannot be created because all of the available RAID " "minor device numbers have been used." msgstr "" "Пристрій програмного RAID не може бути створений, тому що всі доступні " "молодші номери пристроїв RAID вже зайняті." #: ../iw/partition_gui.py:1226 msgid "RAID Options" msgstr "Параметри RAID" #: ../iw/partition_gui.py:1237 #, python-format msgid "" "Software RAID allows you to combine several disks into a larger RAID " "device. A RAID device can be configured to provide additional speed and " "reliability compared to using an individual drive. For more information on " "using RAID devices please consult the %s documentation.\n" "\n" "You currently have %s software RAID partition(s) free to use.\n" "\n" msgstr "" "Програмний RAID дозволяє об'єднувати декілька дисків у один великий пристрій " "RAID. Пристрій RAID може мати більшу швидкодію та надійність у порівнянні з " "окремим пристроєм. Додаткову інформацію про пристрої RAID дивіться у " "документації з %s.\n" "\n" "Зараз у вас готові до використання %s розділів RAID.\n" "\n" #: ../iw/partition_gui.py:1248 msgid "" "To use RAID you must first create at least two partitions of type 'software " "RAID'. Then you can create a RAID device that can be formatted and " "mounted.\n" "\n" msgstr "" "Для використання програмного RAID необхідно створити принаймні два розділи " "типу 'програмний RAID'. Після чого ви зможете створити та підключити " "пристрій RAID.\n" "\n" #: ../iw/partition_gui.py:1254 msgid "What do you want to do now?" msgstr "Що ви бажаєте зробити?" #: ../iw/partition_gui.py:1263 msgid "Create a software RAID _partition." msgstr "Створити _розділ програмний RAID." #: ../iw/partition_gui.py:1266 #, python-format msgid "Create a RAID _device [default=/dev/md%s]." msgstr "Створити _пристрій RAID (типово /dev/md%s)." #: ../iw/partition_gui.py:1270 #, python-format msgid "Clone a _drive to create a RAID device [default=/dev/md%s]." msgstr "Клонувати _диск для створення пристрою RAID (типово /dev/md%s)." #: ../iw/partition_gui.py:1309 msgid "Couldn't Create Drive Clone Editor" msgstr "Не вдається створити редактор клонування дисків" #: ../iw/partition_gui.py:1310 msgid "The drive clone editor could not be created for some reason." msgstr "Редактор клонування дисків не може запуститись з певних причин." #: ../iw/partition_gui.py:1351 msgid "Ne_w" msgstr "_Створити" #: ../iw/partition_gui.py:1354 msgid "Re_set" msgstr "С_кинути зміни" #: ../iw/partition_gui.py:1355 msgid "R_AID" msgstr "R_AID" #: ../iw/partition_gui.py:1356 msgid "_LVM" msgstr "_LVM" #: ../iw/partition_gui.py:1397 msgid "Hide RAID device/LVM Volume _Group members" msgstr "Сховати пристрої RAID/учасників _групи LVM" #: ../iw/partition_ui_helpers_gui.py:91 ../iw/partition_ui_helpers_gui.py:112 #: ../iw/partition_ui_helpers_gui.py:114 ../textw/partition_text.py:263 #: ../textw/partition_text.py:265 ../textw/partition_text.py:267 #: ../textw/partition_text.py:292 msgid "" msgstr "<Не підходить>" #: ../iw/partition_ui_helpers_gui.py:255 msgid "How would you like to prepare the file system on this partition?" msgstr "Як ви бажаєте підготувати файлову систему на цьому розділі?" #: ../iw/partition_ui_helpers_gui.py:263 msgid "Leave _unchanged (preserve data)" msgstr "Залишити _без змін (зберегти дані)" #: ../iw/partition_ui_helpers_gui.py:269 msgid "_Format partition as:" msgstr "_Форматувати розділ як:" #: ../iw/partition_ui_helpers_gui.py:292 msgid "Mi_grate partition to:" msgstr "_Перетворити розділ на:" #: ../iw/partition_ui_helpers_gui.py:314 msgid "Check for _bad blocks?" msgstr "Перевірити на _дефектні блоки?" #: ../iw/partition_ui_helpers_gui.py:349 #, python-format msgid "" "Partitions of type '%s' must be constrained to a single drive. To do this, " "select the drive in the 'Allowable Drives' checklist." msgstr "" "Розділи типу '%s' повинні бути об'єднані в один диск. Це робиться шляхом " "вибору диску зі списку 'Наявні диски'." #: ../iw/partmethod_gui.py:25 ../textw/partmethod_text.py:24 msgid "Disk Partitioning Setup" msgstr "Параметри розподілу диску" #: ../iw/partmethod_gui.py:50 msgid "_Automatically partition" msgstr "_Автоматичний розподіл" #: ../iw/partmethod_gui.py:53 msgid "Manually partition with _Disk Druid" msgstr "Ручний розподіл за допомогою _Disk Druid" #: ../iw/progress_gui.py:31 msgid "Installing Packages" msgstr "Встановлення пакетів" #: ../iw/raid_dialog_gui.py:247 msgid "" "At least two unused software RAID partitions are needed to create a RAID " "device.\n" "\n" "First create at least two partitions of type \"software RAID\", and then " "select the \"RAID\" option again." msgstr "" "Для створення пристрою RAID необхідно принаймні два невикористаних розділи " "RAID.\n" "Створіть принаймні два розділи типу \"програмний RAID\" та виберіть параметр " "\"RAID\" знову." #: ../iw/raid_dialog_gui.py:261 ../iw/raid_dialog_gui.py:682 #: ../textw/partition_text.py:979 msgid "Make RAID Device" msgstr "Створення пристрою RAID" #: ../iw/raid_dialog_gui.py:264 #, python-format msgid "Edit RAID Device: /dev/md%s" msgstr "Правка пристрою RAID: /dev/md%s" #: ../iw/raid_dialog_gui.py:266 ../textw/partition_text.py:977 msgid "Edit RAID Device" msgstr "Правка пристрою RAID" #: ../iw/raid_dialog_gui.py:318 msgid "RAID _Device:" msgstr "RAID _пристрій:" #: ../iw/raid_dialog_gui.py:336 msgid "RAID _Level:" msgstr "_Рівень RAID:" #: ../iw/raid_dialog_gui.py:377 msgid "_RAID Members:" msgstr "_Члени RAID:" #: ../iw/raid_dialog_gui.py:394 msgid "Number of _spares:" msgstr "Кількість р_езервних:" #: ../iw/raid_dialog_gui.py:404 msgid "_Format partition?" msgstr "_Форматувати розділ?" #: ../iw/raid_dialog_gui.py:483 msgid "" "The source drive has no partitions to be cloned. You must first define " "partitions of type 'software RAID' on this drive before it can be cloned." msgstr "" "Диск-джерело не має розділів, які можна клонувати. Для клонування диску " "необхідно визначити розділи типу \"програмний RAID\"." #: ../iw/raid_dialog_gui.py:487 ../iw/raid_dialog_gui.py:493 #: ../iw/raid_dialog_gui.py:505 ../iw/raid_dialog_gui.py:518 msgid "Source Drive Error" msgstr "Помилка вихідного диску" #: ../iw/raid_dialog_gui.py:494 msgid "" "The source drive you selected has partitions which are not of type 'software " "RAID'.\n" "\n" "You must remove these partitions before this drive can be cloned. " msgstr "" "Диск-джерело має розділи, які не є розділами типу 'програмний RAID'.\n" "\n" "Перед клонуванням, ці розділи необхідно видалити. " #: ../iw/raid_dialog_gui.py:506 #, python-format msgid "" "The source drive you selected has partitions which are not constrained to " "the drive /dev/%s.\n" "\n" "You must remove these partitions or restrict them to this drive before this " "drive can be cloned. " msgstr "" "Диск-джерело має розділи, які не об'єднані у пристрій /dev/%s.\n" "\n" "Перед клонуванням диску, ці розділи необхідно видалити або обмежити на цей " "пристрій." #: ../iw/raid_dialog_gui.py:519 msgid "" "The source drive you selected has software RAID partition(s) which are " "members of an active software RAID device.\n" "\n" "You must remove these partitions before this drive can be cloned." msgstr "" "Диск-джерело містить розділи програмного RAID, які є учасниками активного " "пристрою RAID.\n" "\n" "Перед клонуванням диску, ці розділи необхідно видалити." #: ../iw/raid_dialog_gui.py:532 ../iw/raid_dialog_gui.py:538 #: ../iw/raid_dialog_gui.py:557 msgid "Target Drive Error" msgstr "Помилка цільового дику" #: ../iw/raid_dialog_gui.py:533 msgid "Please select the target drives for the clone operation." msgstr "Вкажіть цільові пристрої для операції клонування." #: ../iw/raid_dialog_gui.py:539 #, python-format msgid "The source drive /dev/%s cannot be selected as a target drive as well." msgstr "Диск-джерело /dev/%s не можна вибирати у якості цільового диску." #: ../iw/raid_dialog_gui.py:558 #, python-format msgid "" "The target drive /dev/%s has a partition which cannot be removed for the " "following reason:\n" "\n" "\"%s\"\n" "\n" "You must remove this partition before this drive can be a target." msgstr "" "Цільовий диск /dev/%s містить розділ, який не можна видалити через наступні " "причини:\n" "\n" "\"%s\"\n" "\n" "Цей розділ необхідно видалити заздалегідь." #: ../iw/raid_dialog_gui.py:619 msgid "Please select a source drive." msgstr "Вкажіть вихідний диск." #: ../iw/raid_dialog_gui.py:639 #, python-format msgid "" "The drive /dev/%s will now be cloned to the following drives:\n" "\n" msgstr "" "Диск /dev/%s буде клонований на наступні пристрої:\n" "\n" #: ../iw/raid_dialog_gui.py:644 msgid "" "\n" "\n" "WARNING! ALL DATA ON THE TARGET DRIVES WILL BE DESTROYED." msgstr "" "\n" "\n" "УВАГА! ВСІ ДАНІ НА ЦІЛЬОВОМУ ДИСКУ БУДУТЬ ЗНИЩЕНІ." #: ../iw/raid_dialog_gui.py:647 msgid "Final Warning" msgstr "Останнє попередження" #: ../iw/raid_dialog_gui.py:649 msgid "Clone Drives" msgstr "Клонування дисків" #: ../iw/raid_dialog_gui.py:658 msgid "There was an error clearing the target drives. Cloning failed." msgstr "Помилка клонування: помилка при очищенні цільових дисків." #: ../iw/raid_dialog_gui.py:692 msgid "" "Clone Drive Tool\n" "\n" "This tool allows you to significantly reduce the amount of effort required " "to setup RAID arrays. This tool uses a source drive which has been prepared " "with the desired partitioning layout, and clones this layout onto other " "similar sized drives. Then a RAID device can be created.\n" "\n" "NOTE: The source drive must have partitions which are restricted to be on " "that drive only, and can only contain unused software RAID partitions. " "Other partition types are not allowed.\n" "\n" "EVERYTHING on the target drive(s) will be destroyed by this process." msgstr "" "Утиліта клонування дисків\n" "\n" "Ця утиліта дозволяє значно зменшити кількість зусиль, необхідних для " "створення масиву RAID. Вона дозволяє вибрати вихідний диск з вже " "підготовленими розділами та клонувати його на інші пристрої подібного " "розміру. Після чого буде створений пристрій RAID.\n" " \n" "ПРИМІТКА: На вихідному диску допускаються лише розділи типу \"Програмний RAID" "\". Розділи іншого типу не допускаються.\n" "\n" "ВСІ ДАНІ на цільовому диску будуть знищені." #: ../iw/raid_dialog_gui.py:712 msgid "Source Drive:" msgstr "Диск-джерело:" #: ../iw/raid_dialog_gui.py:720 msgid "Target Drive(s):" msgstr "Цільовий диск(и):" #: ../iw/raid_dialog_gui.py:728 msgid "Drives" msgstr "Пристрої" #: ../iw/release_notes.py:156 ../iw/release_notes.py:161 msgid "Release notes are missing.\n" msgstr "Примітки до випуску відсутні.\n" #: ../iw/release_notes.py:241 msgid "Release Notes" msgstr "Примітки до випуску" #: ../iw/release_notes.py:244 msgid "Unable to load file!" msgstr "Не вдається завантажити файл!" #: ../iw/task_gui.py:80 #, python-format msgid "" "Unable to read package metadata from repository. This may be due to a " "missing repodata directory. Please ensure that your repository has been " "correctly generated.\n" "\n" "%s" msgstr "" "Не вдається прочитати метадані пакету. Можлива причина - відсутність " "каталогу repodata. Переконайтесь, що ваше дерево встановлення сформовано " "правильно.generated.\n" "\n" "%s" #: ../iw/task_gui.py:90 #, python-format msgid "" "Unable to find a group file for %s. This will prevent manual selection of " "packages from the repository from working" msgstr "" "Не вдається знайти файл груп для %s. Не буде працювати ручний вибір пакетів " "у репозиторії." #: ../iw/task_gui.py:122 msgid "Invalid Repository Name" msgstr "Неправильна назва репозиторію" #: ../iw/task_gui.py:123 msgid "You must provide a repository name." msgstr "Потрібно вказати назву репозиторію." #: ../iw/task_gui.py:131 msgid "Invalid Repository URL" msgstr "Неправильний URL сховища" #: ../iw/task_gui.py:132 msgid "You must provide an HTTP or FTP URL to a repository." msgstr "Слід вказати HTTP чи FTP URL цього сховища." #: ../iw/task_gui.py:146 #, python-format msgid "" "The repository %s has already been added. Please choose a different " "repository name and URL." msgstr "Репозиторій \"%s\" вже доданий, вкажіть іншу назву репозиторію та URL." #: ../iw/timezone_gui.py:56 ../textw/timezone_text.py:89 msgid "Time Zone Selection" msgstr "Вибір часового поясу" #: ../iw/upgrade_bootloader_gui.py:27 ../textw/upgrade_bootloader_text.py:108 msgid "Upgrade Boot Loader Configuration" msgstr "Оновлення конфігурації завантажувача" #: ../iw/upgrade_bootloader_gui.py:97 msgid "_Update boot loader configuration" msgstr "_Оновити конфігурацію завантажувача" #: ../iw/upgrade_bootloader_gui.py:98 msgid "This will update your current boot loader." msgstr "Поточний завантажувач буде оновлений." #: ../iw/upgrade_bootloader_gui.py:102 ../textw/upgrade_bootloader_text.py:80 msgid "" "Due to system changes, your boot loader configuration can not be " "automatically updated." msgstr "" "Через зміни у системі, конфігурацію вашого завантажувача неможливо " "автоматично оновити." #: ../iw/upgrade_bootloader_gui.py:105 ../textw/upgrade_bootloader_text.py:84 msgid "" "The installer is unable to detect the boot loader currently in use on your " "system." msgstr "" "Програма встановлення не в змозі визначити встановлений у вашій системі " "завантажувач." #: ../iw/upgrade_bootloader_gui.py:112 ../textw/upgrade_bootloader_text.py:93 #, python-format msgid "" "The installer has detected the %s boot loader currently installed on %s." msgstr "Програма встановлення визначила завантажувач %s, встановлений на %s." #: ../iw/upgrade_bootloader_gui.py:116 msgid "This is the recommended option." msgstr "Це рекомендований вибір." #: ../iw/upgrade_bootloader_gui.py:121 msgid "_Create new boot loader configuration" msgstr "_Створити нову конфігурацію завантажувача" #: ../iw/upgrade_bootloader_gui.py:123 msgid "" "This option creates a new boot loader configuration. If you wish to switch " "boot loaders, you should choose this." msgstr "" "Це дозволить створити нову конфігурацію завантажувача. Якщо ви бажаєте " "змінити завантажувач, також слід вибрати цей варіант." #: ../iw/upgrade_bootloader_gui.py:130 msgid "_Skip boot loader updating" msgstr "_Пропустити оновлення завантажувача" #: ../iw/upgrade_bootloader_gui.py:131 msgid "" "This option makes no changes to boot loader configuration. If you are using " "a third party boot loader, you should choose this." msgstr "" "Це дозволить не змінювати конфігурацію завантажувача. Виберіть цей варіант, " "якщо ви використовуєте завантажувач, який не входить у склад дистрибутиву." #: ../iw/upgrade_bootloader_gui.py:142 msgid "What would you like to do?" msgstr "Що б ви хотіли зробити?" #: ../iw/upgrade_migratefs_gui.py:28 ../textw/upgrade_text.py:31 msgid "Migrate File Systems" msgstr "Перетворення файлових систем" #: ../iw/upgrade_migratefs_gui.py:52 ../textw/upgrade_text.py:33 #, python-format msgid "" "This release of %s supports the ext3 journaling file system, which has " "several benefits over the ext2 file system traditionally shipped in %s. " "This installation program can migrate the ext2 formatted partitions to ext3 " "without data loss.\n" "\n" "Which of these partitions would you like to migrate?" msgstr "" "Ця версія %s підтримує журнальну файлову систему ext3. Вона має декілька " "переваг над файловою системою ext2, яка була традиційною у попередніх " "версіях %s. Є можливість перетворити розділи ext2 на ext3 без втрати даних.\n" "\n" "Які з цих розділів ви бажаєте перетворити?" #: ../iw/upgrade_swap_gui.py:29 msgid "Upgrade Swap Partition" msgstr "Оновлення розділу підкачки" #: ../iw/upgrade_swap_gui.py:89 ../textw/upgrade_text.py:89 #, python-format msgid "" "Recent kernels (2.4 or newer) need significantly more swap than older " "kernels, up to twice the amount of RAM on the system. You currently have %" "dMB of swap configured, but you may create additional swap space on one of " "your file systems now." msgstr "" "Останні ядра ( 2.4 та новіші) вимагають значно більшого простору підкачки " "ніж попередні версії, принаймні вдвічі більше ніж обсяг оперативної пам'яті " "вашого комп'ютера. Зараз у вас виділено %d МБ для підкачки, але зараз ви " "можете додати додатковий простір підкачки на одній з ваших файлових систем." #: ../iw/upgrade_swap_gui.py:96 #, python-format msgid "" "\n" "\n" "The installer has detected %s MB of RAM.\n" msgstr "" "\n" "\n" "Програма встановлення визначила %s МБ пам'яті.\n" #: ../iw/upgrade_swap_gui.py:108 msgid "I _want to create a swap file" msgstr "_Створити файл підкачки" #: ../iw/upgrade_swap_gui.py:117 msgid "Select the _partition to put the swap file on:" msgstr "Виберіть _розділ, на якому розмістити файл підкачки:" #: ../iw/upgrade_swap_gui.py:136 ../textw/upgrade_text.py:107 msgid "Partition" msgstr "Розділ" #: ../iw/upgrade_swap_gui.py:136 msgid "Free Space (MB)" msgstr "Вільний простір (МБ)" #: ../iw/upgrade_swap_gui.py:154 #, python-format msgid "" "A minimum swap file size of %d MB is recommended. Please enter a size for " "the swap file:" msgstr "" "Рекомендується, щоб розмір файлу підкачки був принаймні %d МБ. Введіть " "розмір файлу підкачки:" #: ../iw/upgrade_swap_gui.py:169 msgid "Swap file _size (MB):" msgstr "Р_озмір файла підкачки (МБ):" #: ../iw/upgrade_swap_gui.py:179 msgid "I _don't want to create a swap file" msgstr "Я _не бажаю створювати файл підкачки" #: ../iw/upgrade_swap_gui.py:189 msgid "" "A swap file is strongly recommended. Failure to create one could cause the " "installer to abort abnormally. Are you sure you wish to continue?" msgstr "" "Наполегливо рекомендується створити файл підкачки. У іншому випадку робота " "програми встановлення може бути аварійно завершена. Ви впевнені, що бажаєте " "продовжити без файлу підкачки?" #: ../iw/upgrade_swap_gui.py:197 ../textw/upgrade_text.py:173 msgid "The swap file must be between 1 and 2000 MB in size." msgstr "Розмір фалу підкачки повинен бути між 1 і 2000 МБ." #: ../iw/upgrade_swap_gui.py:204 ../textw/upgrade_text.py:168 msgid "" "There is not enough space on the device you selected for the swap partition." msgstr "На пристрої, який ви вибрали для розділу підкачки, невистачає місця." #: ../iw/zipl_gui.py:28 msgid "z/IPL Boot Loader Configuration" msgstr "Налаштовування завантажувача z/IPL" #: ../iw/zipl_gui.py:52 msgid "The z/IPL boot loader will be installed on your system." msgstr "У вашій системі буде встановлено завантажувач z/IPL." #: ../iw/zipl_gui.py:54 msgid "" "The z/IPL Boot Loader will now be installed on your system.\n" "\n" "The root partition will be the one you selected previously in the partition " "setup.\n" "\n" "The kernel used to start the machine will be the one to be installed by " "default.\n" "\n" "If you wish to make changes later after the installation feel free to change " "the /etc/zipl.conf configuration file.\n" "\n" "You can now enter any additional kernel parameters which your machine or " "your setup may require." msgstr "" "Завантажувач z/IPL буде встановлений у вашій системі.\n" "\n" "Кореневим розділом буде один з раніше вибраних при настроюванні розділів.\n" "\n" "Ядром для запуску машини буде вибрано типове встановлене ядро.\n" "\n" "Якщо ви бажаєте зробити зміни після встановлення, внесіть їх у " "конфігураційний файл /etc/zipl.conf\n" "\n" "Тепер ви можете ввести будь-які необхідні додаткові параметри ядра." #: ../iw/zipl_gui.py:81 ../textw/zipl_text.py:62 msgid "Kernel Parameters" msgstr "Параметри ядра" #: ../iw/zipl_gui.py:84 ../iw/zipl_gui.py:87 msgid "Chandev Parameters" msgstr "Параметри Chandev" #: ../textw/bootloader_text.py:28 msgid "Which boot loader would you like to use?" msgstr "Який завантажувач ви збираєтесь використовувати?" #: ../textw/bootloader_text.py:38 msgid "Use GRUB Boot Loader" msgstr "Використовувати GRUB" #: ../textw/bootloader_text.py:39 msgid "No Boot Loader" msgstr "Без завантажувача" #: ../textw/bootloader_text.py:59 msgid "Skip Boot Loader" msgstr "Пропустити Завантажувач" #: ../textw/bootloader_text.py:60 msgid "" "You have elected not to install any boot loader, which is not recommended " "unless you have an advanced need. Booting your system into Linux directly " "from the hard drive almost always requires a boot loader.\n" "\n" "Are you sure you want to skip boot loader installation?" msgstr "" "Ви вирішили не встановлювати завантажувач. Наполегливо рекомендується " "встановити завантажувач. Завантажувач необхідний для завантаження Linux " "безпосередньо з диску.\n" "\n" "Ви дійсно хочете пропустити встановлення завантажувача?" #: ../textw/bootloader_text.py:92 msgid "" "A few systems need to pass special options to the kernel at boot time to " "function properly. If you need to pass boot options to the kernel, enter " "them now. If you don't need any or aren't sure, leave this blank." msgstr "" "У деяких системах під час завантаження треба передавати ядру особливі " "параметри. Якщо вам потрібні такі параметри, введіть їх зараз. Якщо " "додаткові параметри не потрібні, або ви не знаєте про що йде мова - залиште " "це поле порожнім." #: ../textw/bootloader_text.py:101 msgid "Force use of LBA32 (not normally required)" msgstr "Використовувати LBA32 (зазвичай не вимагається)" #: ../textw/bootloader_text.py:165 msgid "Where do you want to install the boot loader?" msgstr "Куди ви бажаєте встановити завантажувач?" #: ../textw/bootloader_text.py:193 ../textw/bootloader_text.py:258 msgid "Boot label" msgstr "Позначка завантаження" #: ../textw/bootloader_text.py:197 msgid "Clear" msgstr "Очистити" #: ../textw/bootloader_text.py:205 msgid "Edit Boot Label" msgstr "Правка позначки системи" #: ../textw/bootloader_text.py:223 ../textw/bootloader_text.py:228 msgid "Invalid Boot Label" msgstr "Некоректна позначка системи" #: ../textw/bootloader_text.py:224 msgid "Boot label may not be empty." msgstr "Позначка системи не може бути порожньою." #: ../textw/bootloader_text.py:229 msgid "Boot label contains illegal characters." msgstr "Позначка системи містить неприпустимі символи." #: ../textw/bootloader_text.py:273 ../textw/constants_text.py:56 #: ../textw/partition_text.py:1467 msgid "Edit" msgstr "Правка" #: ../textw/bootloader_text.py:277 #, python-format msgid "" "The boot manager %s uses can boot other operating systems as well. Please " "tell me what partitions you would like to be able to boot and what label you " "want to use for each of them." msgstr "" "Менеджер завантаження %s також може завантажувати інші операційні системи. " "Вкажіть завантажувальні розділи та позначки, які використовуватимуться при " "звертанні до них." #: ../textw/bootloader_text.py:290 msgid "" " select | select default | delete | next screen>" msgstr "" " вибір | типовий елемент | видалити | наступний екран" #: ../textw/bootloader_text.py:386 msgid "" "A boot loader password prevents users from passing arbitrary options to the " "kernel. For highest security, you should set a password, but a password is " "not necessary for more casual users." msgstr "" "Пароль початкового завантажувача захищає від передавання користувачами " "параметрів ядру. Для підвищеної безпеки рекомендується встановити пароль, " "хоча це й не обов'язково у більшості випадків." #: ../textw/bootloader_text.py:396 msgid "Use a GRUB Password" msgstr "Використовувати пароль GRUB" #: ../textw/bootloader_text.py:408 msgid "Boot Loader Password:" msgstr "Пароль завантажувача:" #: ../textw/bootloader_text.py:409 msgid "Confirm:" msgstr "Підтвердження:" #: ../textw/bootloader_text.py:438 msgid "Passwords Do Not Match" msgstr "Паролі не співпадають" #: ../textw/bootloader_text.py:443 msgid "Password Too Short" msgstr "Пароль надто короткий" #: ../textw/bootloader_text.py:444 msgid "Boot loader password is too short" msgstr "Пароль завантажувача занадто короткий" #: ../textw/complete_text.py:26 msgid "" "Press to end the installation process.\n" "\n" msgstr "" "Натисніть для завершення процесу встановлення.\n" "\n" #: ../textw/complete_text.py:27 msgid " to exit" msgstr " для виходу" #: ../textw/complete_text.py:31 #, python-format msgid "" "Congratulations, your %s installation is complete.\n" "\n" "%s%s" msgstr "" "Вітаємо, встановлення %s завершено.\n" "\n" "%s%s" #: ../textw/complete_text.py:34 #, python-format msgid "" "For information on errata (updates and bug fixes), visit http://www.redhat." "com/errata/.\n" "\n" "Information on using your system is available in the %s manuals at http://" "www.redhat.com/docs/." msgstr "" "Інформацію про виправлення до цього випуску Red Hat Linux, можна знайти у " "розділі Errata на http://www.redhat.com/errata\n" "\n" "Інформацію про використання та налаштовування вашої системи можна одержати з " "документації %s на http://www.redhat.com/docs" #: ../textw/complete_text.py:40 msgid "Complete" msgstr "Завершено" #: ../textw/complete_text.py:41 msgid "Reboot" msgstr "Перезавантаження" #: ../textw/confirm_text.py:22 msgid "Installation to begin" msgstr "Початок встановлення" #: ../textw/confirm_text.py:23 #, python-format msgid "" "A complete log of your installation will be in %s after rebooting your " "system. You may want to keep this file for later reference." msgstr "" "Повний протокол встановлення вашої системи після перевантаження буде " "знаходитись у файлі %s. Можливо вам знадобиться до нього звернутись." #: ../textw/confirm_text.py:26 ../textw/confirm_text.py:28 #: ../textw/confirm_text.py:54 ../textw/confirm_text.py:56 #: ../textw/constants_text.py:44 ../loader2/cdinstall.c:392 #: ../loader2/driverdisk.c:282 ../loader2/driverdisk.c:313 #: ../loader2/driverdisk.c:398 ../loader2/driverselect.c:70 #: ../loader2/driverselect.c:180 ../loader2/driverselect.c:205 #: ../loader2/hdinstall.c:265 ../loader2/hdinstall.c:319 ../loader2/kbd.c:131 #: ../loader2/loader.c:342 ../loader2/loader.c:1016 ../loader2/loader.c:1038 #: ../loader2/net.c:272 ../loader2/net.c:311 ../loader2/net.c:739 #: ../loader2/net.c:1064 ../loader2/net.c:1806 ../loader2/nfsinstall.c:57 #: ../loader2/urls.c:282 ../loader2/urls.c:470 msgid "Back" msgstr "Назад" #: ../textw/confirm_text.py:50 msgid "Upgrade to begin" msgstr "Початок поновлення" #: ../textw/confirm_text.py:51 #, python-format msgid "" "A complete log of your upgrade will be in %s after rebooting your system. " "You may want to keep this file for later reference." msgstr "" "Повний протокол поновлення вашої системи після перевантаження буде " "знаходились у %s. Можливо вам знадобиться до нього звернутись." #: ../textw/grpselect_text.py:87 msgid "Please select the package groups you would like to install." msgstr "Виберіть групи пакетів які слід встановити." #: ../textw/grpselect_text.py:105 msgid "" ",<+>,<-> selection | Group Details | next screen" msgstr "" "<Пробіл>,<+>,<-> вибір | Опис групи | наступний екран" #: ../textw/grpselect_text.py:117 msgid "No optional packages to select" msgstr "Додаткових пакетів немає" #: ../textw/grpselect_text.py:139 msgid "Package Group Details" msgstr "Опис групи пакетів" #: ../textw/keyboard_text.py:38 msgid "Keyboard Selection" msgstr "Тип клавіатури" #: ../textw/keyboard_text.py:39 msgid "Which model keyboard is attached to this computer?" msgstr "Вкажіть модель клавіатури, підключеної до цього комп'ютера" #: ../textw/mouse_text.py:39 msgid "What device is your mouse located on?" msgstr "До якого пристрою підключено мишу?" #: ../textw/mouse_text.py:71 msgid "Which model mouse is attached to this computer?" msgstr "Вкажіть модель миші, що підключена що цього комп'ютера" #: ../textw/mouse_text.py:82 msgid "Emulate 3 Buttons?" msgstr "Імітувати 3 кнопки?" #: ../textw/mouse_text.py:85 msgid "Mouse Selection" msgstr "Вибір миші" #: ../textw/network_text.py:53 #, python-format msgid "" "You have not specified the field %s. Depending on your network environment " "this may cause problems later." msgstr "" "Ви лишили незаповненим поле %s. В залежності від мережного оточення це може " "призвести до виникнення проблем у майбутньому." #: ../textw/network_text.py:70 #, python-format msgid "IPv%d prefix must be between 0 and %d." msgstr "Префікс IPv%d повинен бути у межах від 0 до %d" #: ../textw/network_text.py:74 msgid "Integer Required for Prefix" msgstr "У якості префіксу використовується ціле число" #: ../textw/network_text.py:75 #, python-format msgid "" "You must enter a valid integer for the %s. For IPv4, the value can be " "between 0 and 32. For IPv6 it can be between 0 and 128." msgstr "" "Треба ввести коректне ціле число для %s. Для IPv4 його значення лежить в " "межах від 0 до 32. Для IPv6 - у межах від 0 до 128." #: ../textw/network_text.py:82 tmp/netpostconfig.glade.h:16 msgid "Prefix (Netmask)" msgstr "Префікс (маска мережі)" #: ../textw/network_text.py:84 tmp/netpostconfig.glade.h:15 msgid "Prefix" msgstr "Префікс" #: ../textw/network_text.py:137 msgid "Activate on boot" msgstr "Активізувати при завантаженні" #: ../textw/network_text.py:144 ../loader2/net.c:719 #: tmp/netpostconfig.glade.h:9 msgid "Enable IPv4 support" msgstr "Включити підтримку IPv4" #: ../textw/network_text.py:151 ../loader2/net.c:732 #: tmp/netpostconfig.glade.h:10 msgid "Enable IPv6 support" msgstr "Включити підтримку IPv6" #: ../textw/network_text.py:164 msgid "P-to-P:" msgstr "P-to-P:" #: ../textw/network_text.py:182 tmp/netpostconfig.glade.h:7 msgid "ESSID:" msgstr "ESSID:" #: ../textw/network_text.py:191 msgid "WEP Key:" msgstr "Ключ WEP:" #: ../textw/network_text.py:204 #, python-format msgid "Network Configuration for %s" msgstr "Налаштовування мережі для %s" #: ../textw/network_text.py:241 ../textw/network_text.py:244 msgid "point-to-point IP address" msgstr "IP адреса точка-точка" #: ../textw/network_text.py:267 tmp/netpostconfig.glade.h:5 msgid "Dynamic IP configuration (DHCP)" msgstr "Динамічне налаштовування IP (DHCP)" #: ../textw/network_text.py:270 ../textw/network_text.py:401 msgid "Manual address configuration" msgstr "Ручне налаштовування адреси" #: ../textw/network_text.py:290 #, python-format msgid "IPv4 Configuration for %s" msgstr "Конфігурація IPv4 для %s" #: ../textw/network_text.py:320 ../textw/network_text.py:332 #: ../textw/network_text.py:335 msgid "IPv4 address" msgstr "Адреса IPv4" #: ../textw/network_text.py:324 msgid "IPv4 network mask" msgstr "Маска мережі IPv4" #: ../textw/network_text.py:350 ../textw/network_text.py:353 #: ../textw/network_text.py:356 msgid "IPv4 prefix (network mask)" msgstr "Префікс (маска мережі) IPv4" #: ../textw/network_text.py:395 tmp/netpostconfig.glade.h:4 msgid "Automatic neighbor discovery" msgstr "Автоматичний пошук вузлів" #: ../textw/network_text.py:398 tmp/netpostconfig.glade.h:6 msgid "Dynamic IP configuration (DHCPv6)" msgstr "Динамічне налаштовування IP (DHCPv6)" #: ../textw/network_text.py:425 #, python-format msgid "IPv6 Configuration for %s" msgstr "Конфігурація IPv6 для %s" #: ../textw/network_text.py:455 ../textw/network_text.py:466 #: ../textw/network_text.py:469 msgid "IPv6 address" msgstr "Адреса IPv6" #: ../textw/network_text.py:459 ../textw/network_text.py:478 msgid "IPv6 prefix" msgstr "Префікс IPv6" #: ../textw/network_text.py:504 msgid "Configure Network Interface" msgstr "Налаштувати мережний інтерфейс" #: ../textw/network_text.py:505 #, python-format msgid "Would you like to configure the %s network interface in your system?" msgstr "Активувати мережний інтерфейс %s цієї системи?" #: ../textw/network_text.py:519 ../textw/network_text.py:521 msgid "UNCONFIGURED" msgstr "Не НАЛАШТОВАНО" #: ../textw/network_text.py:530 msgid "" "The current configuration settings for each interface are listed next to the " "device name. Unconfigured interfaces are shown as UNCONFIGURED. To " "configure an interface, highlight it and choose Edit. When you are " "finished, press OK to continue." msgstr "" "Поточні параметри кожного інтерфейсу відображені поруч з назвою пристрою. Не " "налаштовані інтерфейси відображаються як НЕ НАЛАШТОВАНО. Щоб налаштувати " "інтерфейс, виділіть його та виберіть Змінити. Після завершення редагування " "натисніть Гаразд." #: ../textw/network_text.py:620 msgid "Active on boot" msgstr "Активний при завантаженні" #: ../textw/network_text.py:622 msgid "Inactive on boot" msgstr "Неактивний при завантаженні" #: ../textw/network_text.py:625 msgid "DHCP" msgstr "DHCP" #: ../textw/network_text.py:630 msgid "Auto IPv6" msgstr "Авто IPv6" #: ../textw/network_text.py:632 msgid "DHCPv6" msgstr "DHCPv6" #: ../textw/network_text.py:638 #, python-format msgid "%s, %s, %s" msgstr "%s, %s, %s" #: ../textw/network_text.py:640 ../textw/network_text.py:642 #, python-format msgid "%s, %s" msgstr "%s, %s" #: ../textw/network_text.py:665 ../loader2/net.c:1025 msgid "Gateway:" msgstr "Шлюз:" #: ../textw/network_text.py:674 msgid "Primary DNS:" msgstr "Первинний DNS:" #: ../textw/network_text.py:679 msgid "Secondary DNS:" msgstr "Вторинний DNS:" #: ../textw/network_text.py:686 msgid "Miscellaneous Network Settings" msgstr "Додаткові параметри мережі" #: ../textw/network_text.py:703 ../textw/network_text.py:706 msgid "gateway" msgstr "Шлюз" #: ../textw/network_text.py:713 ../textw/network_text.py:716 msgid "primary DNS" msgstr "первинний DNS" #: ../textw/network_text.py:725 msgid "secondary DNS" msgstr "вторинний DNS" #: ../textw/network_text.py:759 msgid "automatically via DHCP" msgstr "автоматично через DHCP" #: ../textw/network_text.py:762 msgid "manually" msgstr "вручну" #: ../textw/network_text.py:781 msgid "Hostname Configuration" msgstr "Назва комп'ютера" #: ../textw/network_text.py:784 msgid "" "If your system is part of a larger network where hostnames are assigned by " "DHCP, select automatically via DHCP. Otherwise, select manually and enter a " "hostname for your system. If you do not, your system will be known as " "'localhost.'" msgstr "" "Якщо ваша система є частиною великої мережі, де назви вузлів призначаються " "службою DHCP, виберіть \"автоматично через DHCP\". У іншому випадку вкажіть " "назву вузла вручну. Якщо назва вузла не буде вказана, система буде відома " "під назвою 'localhost'." #: ../textw/network_text.py:810 ../textw/network_text.py:816 msgid "Invalid Hostname" msgstr "Неприпустима назва комп'ютера" #: ../textw/network_text.py:811 msgid "You have not specified a hostname." msgstr "Ви не вказали назву комп'ютера." #: ../textw/partition_text.py:43 msgid "Must specify a value" msgstr "Необхідно вказати значення" #: ../textw/partition_text.py:46 msgid "Requested value is not an integer" msgstr "Значення не є цілим числом" #: ../textw/partition_text.py:48 msgid "Requested value is too large" msgstr "Значення занадто велике" #: ../textw/partition_text.py:115 #, python-format msgid "RAID Device %s" msgstr "Пристрій RAID %s" #: ../textw/partition_text.py:243 #, python-format msgid "Warning: %s" msgstr "Увага: %s" #: ../textw/partition_text.py:244 msgid "Modify Partition" msgstr "Правити розділ" #: ../textw/partition_text.py:244 msgid "Add anyway" msgstr "Додати незважаючи" #: ../textw/partition_text.py:282 msgid "Mount Point:" msgstr "Точка монтування:" #: ../textw/partition_text.py:334 msgid "File System type:" msgstr "Тип файлової системи:" #: ../textw/partition_text.py:368 msgid "Allowable Drives:" msgstr "Доступні пристрої:" #: ../textw/partition_text.py:424 msgid "Fixed Size:" msgstr "Фіксований розмір:" #: ../textw/partition_text.py:426 msgid "Fill maximum size of (MB):" msgstr "Заповнити максимальний розмір (Мб):" #: ../textw/partition_text.py:430 msgid "Fill all available space:" msgstr "Заповнити весь доступний простір:" #: ../textw/partition_text.py:453 msgid "Start Cylinder:" msgstr "Початковий циліндр:" #: ../textw/partition_text.py:466 msgid "End Cylinder:" msgstr "Кінцевий Циліндр:" #: ../textw/partition_text.py:489 msgid "Volume Group:" msgstr "Група томів:" #: ../textw/partition_text.py:511 msgid "RAID Level:" msgstr "Рівень RAID:" #: ../textw/partition_text.py:529 msgid "RAID Members:" msgstr "Члени RAID:" #: ../textw/partition_text.py:548 msgid "Number of spares?" msgstr "Кількість резервних?" #: ../textw/partition_text.py:562 msgid "File System Type:" msgstr "Тип ФС:" #: ../textw/partition_text.py:575 msgid "File System Label:" msgstr "Позначка ФС:" #: ../textw/partition_text.py:586 msgid "File System Option:" msgstr "Параметри ФС:" #: ../textw/partition_text.py:589 ../textw/partition_text.py:827 #: ../textw/partition_text.py:1064 ../textw/partition_text.py:1236 #, python-format msgid "Format as %s" msgstr "Форматувати як %s" #: ../textw/partition_text.py:591 ../textw/partition_text.py:829 #: ../textw/partition_text.py:1066 ../textw/partition_text.py:1238 #, python-format msgid "Migrate to %s" msgstr "Перетворити на %s" #: ../textw/partition_text.py:593 ../textw/partition_text.py:831 #: ../textw/partition_text.py:1068 ../textw/partition_text.py:1240 msgid "Leave unchanged" msgstr "Залишити без змін" #: ../textw/partition_text.py:609 ../textw/partition_text.py:804 #: ../textw/partition_text.py:1044 ../textw/partition_text.py:1216 msgid "File System Options" msgstr "Параметри ФС" #: ../textw/partition_text.py:612 msgid "" "Please choose how you would like to prepare the file system on this " "partition." msgstr "Виберіть, яким чином підготувати файлову систему а цьому розділі." #: ../textw/partition_text.py:620 msgid "Check for bad blocks" msgstr "Перевіряти на дефектні блоки" #: ../textw/partition_text.py:624 msgid "Leave unchanged (preserve data)" msgstr "Залишити без змін (зберігати дані)" #: ../textw/partition_text.py:633 msgid "Format as:" msgstr "Форматувати як:" #: ../textw/partition_text.py:653 msgid "Migrate to:" msgstr "Перетворити на:" #: ../textw/partition_text.py:765 msgid "Force to be a primary partition" msgstr "Зробити головним розділом" #: ../textw/partition_text.py:782 msgid "Not Supported" msgstr "Не підтримується" #: ../textw/partition_text.py:783 msgid "You can only edit LVM Volume Groups in the graphical installer." msgstr "Групи томів LVM можуть бути змінені лише при графічному встановленні." #: ../textw/partition_text.py:859 ../textw/partition_text.py:912 msgid "Invalid Entry for Partition Size" msgstr "Невірний запис розміру розділу" #: ../textw/partition_text.py:871 msgid "Invalid Entry for Maximum Size" msgstr "Невірний запис для максимального розміру" #: ../textw/partition_text.py:890 msgid "Invalid Entry for Starting Cylinder" msgstr "Невірний запис для початкового циліндра" #: ../textw/partition_text.py:904 msgid "Invalid Entry for End Cylinder" msgstr "Невірний запис для першого циліндра" #: ../textw/partition_text.py:1017 msgid "No RAID partitions" msgstr "Немає розділів RAID" #: ../textw/partition_text.py:1018 msgid "At least two software RAID partitions are needed." msgstr "Необхідно принаймні два розділи типу \"програмний RAID\"." #: ../textw/partition_text.py:1030 ../textw/partition_text.py:1203 msgid "Format partition?" msgstr "Форматувати розділ?" #: ../textw/partition_text.py:1092 msgid "Invalid Entry for RAID Spares" msgstr "Невірний запис для резервних пристроїв RAID" #: ../textw/partition_text.py:1107 msgid "Too many spares" msgstr "Занадто багато резервних" #: ../textw/partition_text.py:1108 msgid "You may not use any spares with a RAID0 array." msgstr "Ви не можете використовувати резервні пристрої у масиві RAID0." #: ../textw/partition_text.py:1189 msgid "No Volume Groups" msgstr "Немає груп томів" #: ../textw/partition_text.py:1190 msgid "No volume groups exist in which to create a logical volume" msgstr "Не визначені групи томів, у яких можна створити логічний том" #: ../textw/partition_text.py:1314 #, python-format msgid "" "The current requested size (%10.2f MB) is larger than the maximum logical " "volume size (%10.2f MB). " msgstr "" "Запитаний розмір (%10.2f МБ) перевищує максимальний розмір логічного тому (%" "10.2f МБ)." #: ../textw/partition_text.py:1333 #, python-format msgid "" "The current requested size (%10.2f MB) is larger than the available size in " "the volume group (%10.2f MB)." msgstr "" "Запитаний розмір (%10.2f МБ) перевищує наявний розмір у групі томів (%10.2f " "МБ)." #: ../textw/partition_text.py:1387 msgid "New Partition or Logical Volume?" msgstr "Новий розділ чи логічний том" #: ../textw/partition_text.py:1388 msgid "Would you like to create a new partition or a new logical volume?" msgstr "Бажаєте створити новий розділ чи новий логічний том?" #: ../textw/partition_text.py:1390 msgid "partition" msgstr "розділ" #: ../textw/partition_text.py:1390 msgid "logical volume" msgstr "логічний том" #: ../textw/partition_text.py:1466 msgid "New" msgstr "Створити" #: ../textw/partition_text.py:1468 msgid "Delete" msgstr "Видалити" #: ../textw/partition_text.py:1469 msgid "RAID" msgstr "RAID" #: ../textw/partition_text.py:1472 msgid "" " F1-Help F2-New F3-Edit F4-Delete F5-Reset F12-OK " msgstr "" " F1-Довідка F2-Створити F3-Правка F4-Видалити F5-Скинути F12-Гаразд " #: ../textw/partition_text.py:1504 msgid "No Root Partition" msgstr "Не вказаний кореневий розділ" #: ../textw/partition_text.py:1505 msgid "Installation requires a / partition." msgstr "Програма встановлення вимагає наявності розділу /." #: ../textw/partition_text.py:1547 msgid "Partitioning Type" msgstr "Тип розподілу" # #: ../textw/partition_text.py:1549 msgid "" "Installation requires partitioning of your hard drive. The default layout " "is reasonable for most users. You can either choose to use this or create " "your own." msgstr "" "Для встановлення потрібні розділи на жорсткому диску. Типовий розподіл є " "оптимальним для більшості користувачів. Проте, ви можете створити розділи " "вручну." #: ../textw/partition_text.py:1573 msgid "Which drive(s) do you want to use for this installation?" msgstr "Які пристрої ви хочете використати для цього встановлення?" #: ../textw/partition_text.py:1588 msgid ",<+>,<-> selection | Add drive | next screen" msgstr "" "<Пробіл>,<+>,<-> вибір | Додати диск | наступний екран" #: ../textw/partition_text.py:1657 msgid "Review Partition Layout" msgstr "Перегляд розподілу диску" #: ../textw/partition_text.py:1658 msgid "Review and modify partitioning layout?" msgstr "Переглянути та змінити розподіл дисків?" #: ../textw/partition_text.py:1679 tmp/adddrive.glade.h:3 msgid "Advanced Storage Options" msgstr "Додаткові параметри накопичувачів" #: ../textw/partition_text.py:1680 tmp/adddrive.glade.h:5 msgid "How would you like to modify your drive configuration?" msgstr "Як слід виконати зміну конфігурації диску?" #: ../textw/partition_text.py:1703 msgid "Add FCP Device" msgstr "Додати пристрій FCP" #: ../textw/partition_text.py:1704 tmp/zfcp-config.glade.h:5 msgid "" "zSeries machines can access industry-standard SCSI devices via Fibre Channel " "(FCP). You need to provide a 16 bit device number, a 64 bit World Wide Port " "Name (WWPN), and a 64 bit FCP LUN for each device." msgstr "" "Машини zSeries можуть отримувати доступ до стандартних SCSI пристроїв через " "Fibre Channel (FCP). Для кожного пристрою необхідно вказати: 16-бітний номер " "пристрою, 64-бітний World Wide Port Number (WWPN) та 64-бітний FCP LUN." #: ../textw/partition_text.py:1727 tmp/iscsi-config.glade.h:5 msgid "Configure iSCSI Parameters" msgstr "Налаштовування параметрів iSCSI" #: ../textw/partition_text.py:1728 tmp/iscsi-config.glade.h:6 msgid "" "To use iSCSI disks, you must provide the address of your iSCSI target and " "the iSCSI initiator name you've configured for your host." msgstr "" "Щоб використовувати диски iSCSI, ви маєте надати адресу пристрою iSCSI та " "назву ініціатора iSCSI, які були встановлені у вашому вузлі." #: ../textw/partition_text.py:1729 msgid "Target IP Address" msgstr "Цільова адреса IP" #: ../textw/partition_text.py:1730 msgid "iSCSI Initiator Name" msgstr "Назва ініціатора iSCSI" #: ../textw/partmethod_text.py:26 msgid "Autopartition" msgstr "Автоматичний розподіл" #: ../textw/partmethod_text.py:27 msgid "Disk Druid" msgstr "Disk Druid" #: ../textw/progress_text.py:51 msgid "Package Installation" msgstr "Установка пакетів" #: ../textw/task_text.py:42 msgid "Package selection" msgstr "Вибір пакетів" #: ../textw/task_text.py:48 tmp/tasksel.glade.h:4 #, no-c-format, python-format msgid "" "The default installation of %s includes a set of software applicable for " "general internet usage. What additional tasks would you like your system to " "support?" msgstr "" "Типове встановлення %s включає набір програм, що використовуються для " "звичайної роботи з Інтернет. Підтримку яких додаткових завдань повинна " "включати ваша система?" #: ../textw/task_text.py:63 msgid "Customize software selection" msgstr "Уточнення вибору ПЗ" #: ../textw/timezone_text.py:68 msgid "In which time zone are you located?" msgstr "У якому часовому поясі ви знаходитесь?" #: ../textw/timezone_text.py:86 msgid "System clock uses UTC" msgstr "Системний годинник використовує UTC" #: ../textw/upgrade_bootloader_text.py:88 #: ../textw/upgrade_bootloader_text.py:97 msgid "Update boot loader configuration" msgstr "Оновити параметри завантажувача" #: ../textw/upgrade_bootloader_text.py:100 msgid "Skip boot loader updating" msgstr "Пропустити оновлення завантажувача" #: ../textw/upgrade_bootloader_text.py:102 msgid "Create new boot loader configuration" msgstr "Створити нову конфігурацію завантажувача" #: ../textw/upgrade_text.py:107 msgid "Free Space" msgstr "Вільний простір" #: ../textw/upgrade_text.py:122 msgid "RAM detected (MB):" msgstr "Знайдено пам'яті (Мб):" #: ../textw/upgrade_text.py:125 msgid "Suggested size (MB):" msgstr "Запропонований розмір (Мб):" #: ../textw/upgrade_text.py:128 msgid "Swap file size (MB):" msgstr "Розмір файлу підкачки (Мб):" #: ../textw/upgrade_text.py:136 msgid "Add Swap" msgstr "Додати підкачку" #: ../textw/upgrade_text.py:161 msgid "The value you entered is not a valid number." msgstr "Вказаний вами розмір повинен бути числом." #: ../textw/upgrade_text.py:194 msgid "Reinstall System" msgstr "Перевстановлення системи" #: ../textw/upgrade_text.py:203 msgid "System to Upgrade" msgstr "Система для оновлення" #: ../textw/upgrade_text.py:204 msgid "" "There seem to be one or more existing Linux installations on your system.\n" "\n" "Please choose one to upgrade, or select 'Reinstall System' to freshly " "install your system." msgstr "" "У вашій системі знайдено одну або декілька встановлених систем Linux.\n" "\n" "Виберіть одну з них для оновлення, або виберіть 'Перевстановлення системи' " "для встановлення нової системи." #: ../textw/userauth_text.py:27 msgid "Root Password" msgstr "Пароль користувача root" #: ../textw/userauth_text.py:29 msgid "" "Pick a root password. You must type it twice to ensure you know it and do " "not make a typing mistake. Remember that the root password is a critical " "part of system security!" msgstr "" "Оберіть пароль користувача root. Ви маєте ввести його двічі, щоб виключити " "помилку при вводі. Пам'ятайте, що пароль користувача root - критичний для " "безпеки системи!" #: ../textw/userauth_text.py:60 msgid "The root password must be at least 6 characters long." msgstr "Пароль користувача root має складатися принаймні з 6 символів." #: ../textw/welcome_text.py:23 #, python-format msgid "" "Welcome to %s!\n" "\n" msgstr "" "Ласкаво просимо до %s!\n" "\n" #: ../textw/zipl_text.py:26 msgid "" "The z/IPL Boot Loader will be installed on your system after installation is " "complete. You can now enter any additional kernel and chandev parameters " "which your machine or your setup require." msgstr "" "Після завершення встановлення системи буде встановлено завантажувач z/IPL. " "Зараз ви можете ввести будь-які додаткові необхідні параметри для ядра та " "chandev." #: ../textw/zipl_text.py:58 msgid "z/IPL Configuration" msgstr "Налаштовування z/IPL" #: ../textw/zipl_text.py:66 ../textw/zipl_text.py:70 msgid "Chandev line " msgstr "Рядок Chandev" #: ../installclasses/fedora.py:15 msgid "_Fedora" msgstr "_Fedora" #: ../installclasses/fedora.py:16 ../installclasses/rhel.py:22 #, python-format msgid "" "The default installation of %s includes a set of software applicable for " "general internet usage. What additional tasks would you like your system to " "include support for?" msgstr "" "Типове встановлення %s включає набір програм, що використовуються для " "звичайної роботи з Інтернет. Підтримку яких додаткових завдань повинна " "включати ваша система?" #: ../installclasses/fedora.py:25 msgid "Office and Productivity" msgstr "Офісні програми" #: ../installclasses/fedora.py:26 ../installclasses/rhel.py:35 #: ../installclasses/rhel.py:40 msgid "Software Development" msgstr "Розробка програм" #: ../installclasses/fedora.py:27 ../installclasses/rhel.py:39 msgid "Web server" msgstr "Веб-сервер" #: ../installclasses/rhel.py:21 msgid "Red Hat Enterprise Linux" msgstr "Red Hat Enterprise Linux" #: ../installclasses/rhel.py:32 msgid "Office" msgstr "Офіс" #: ../installclasses/rhel.py:33 msgid "Multimedia" msgstr "Мультимедіа" #: ../installclasses/rhel.py:44 msgid "Virtualization" msgstr "Віртуалізація" #: ../installclasses/rhel.py:45 msgid "Clustering" msgstr "Кластеризація" #: ../installclasses/rhel.py:46 msgid "Storage Clustering" msgstr "Кластеризація накопичувачів" #: ../installclasses/rhel.py:50 msgid "Installation Number" msgstr "Номер встановлення" #: ../installclasses/rhel.py:51 msgid "" "To install the full set of supported packages included in your subscription, " "please enter your Installation Number" msgstr "" "Щоб встановити повний набір пакетів вашої передплати, введіть Номер " "встановлення" #: ../installclasses/rhel.py:54 msgid "" "If you're unable to locate the Installation Number, consult http://www." "redhat.com/apps/support/in.html.\n" "\n" "If you skip:\n" "* You may not get access to the full set of packages included in your " "subscription.\n" "* It may result in an unsupported/uncertified installation of Red Hat " "Enterprise Linux.\n" "* You will not get software and security updates for packages not included " "in your subscription." msgstr "" "Якщо ви не можете найти Номер встановлення, проконсультуйтесь з http://www." "redhat.com/apps/support/in.html.\n" "\n" "Якщо пропустити цей крок:\n" "* Ви не зможете отримати доступ до повного набору пакетів вашої передплати.\n" "* Встановлення Red Hat Enterprise Linux буде не підтримуваним/не " "сертифікованим.\n" "* Ви не отримаєте оновлень пакетів, не включених у вашу передплату." #: ../loader2/cdinstall.c:92 ../loader2/cdinstall.c:113 #: ../loader2/mediacheck.c:346 msgid "Media Check" msgstr "Перевірка носія" #: ../loader2/cdinstall.c:92 ../loader2/cdinstall.c:95 #: ../loader2/cdinstall.c:113 ../loader2/cdinstall.c:121 #: ../loader2/method.c:422 msgid "Test" msgstr "Перевірити" #: ../loader2/cdinstall.c:92 ../loader2/cdinstall.c:96 msgid "Eject Disc" msgstr "Витягти диск" #: ../loader2/cdinstall.c:93 #, c-format msgid "" "Choose \"%s\" to test the disc currently in the drive, or \"%s\" to eject " "the disc and insert another for testing." msgstr "" "Натисніть \"%s\" для перевірки диску в пристрої, або \"%s\", щоб " "витягти диск та вставити інший диск для перевірки." #: ../loader2/cdinstall.c:114 #, c-format msgid "" "If you would like to test additional media, insert the next disc and press " "\"%s\". Testing each disc is not strictly required, however it is highly " "recommended. Minimally, the discs should be tested prior to using them for " "the first time. After they have been successfully tested, it is not required " "to retest each disc prior to using it again." msgstr "" "Якщо у вас є для перевірки додаткові носії, вставте наступний диск та " "натисніть \"%s\". Тестування кожного диска не вимагається, проте " "наполегливо рекомендується. Бажано перевірити кожен диск перед першим " "використанням. Після успішного тестування, не треба тестувати диск перед " "кожним використанням." #: ../loader2/cdinstall.c:137 #, c-format msgid "" "The %s disc was not found in any of your drives. Please insert the %s disc " "and press %s to retry." msgstr "" "Диск %s не знайдено у пристроях. Вставте диск %s та натисніть %s для " "продовження." #: ../loader2/cdinstall.c:258 msgid "Disc Found" msgstr "Знайдено диск" #: ../loader2/cdinstall.c:259 #, c-format msgid "" "To begin testing the media before installation press %s.\n" "\n" "Choose %s to skip the media test and start the installation." msgstr "" "Щоб почати перевірку носіїв перед встановленням натисніть %s.\n" "\n" "Натисніть %s, щоб пропустити перевірку носія та запустити встановлення." #: ../loader2/cdinstall.c:379 #, c-format msgid "" "No %s disc was found which matches your boot media. Please insert the %s " "disc and press %s to retry." msgstr "" "Диск %s не знайдено у пристроях. Вставте диск %s та натисніть %s, щоб " "спробувати ще раз." #: ../loader2/cdinstall.c:384 #, c-format msgid "" "The %s disc was not found in any of your CDROM drives. Please insert the %s " "disc and press %s to retry." msgstr "" "Диск %s не знайдено у пристроях. Вставте диск %s та натисніть %s для " "продовження." #: ../loader2/cdinstall.c:391 msgid "Disc Not Found" msgstr "Диск не знайдено" #: ../loader2/cdinstall.c:464 msgid "Cannot find kickstart file on CDROM." msgstr "Не вдається знайти kickstart файл на CDROM." #: ../loader2/copy.c:45 ../loader2/method.c:158 ../loader2/method.c:376 #, c-format msgid "Failed to read directory %s: %s" msgstr "Не вдається прочитати каталог %s: %s" #: ../loader2/driverdisk.c:134 ../loader2/firewire.c:55 msgid "Loading" msgstr "Завантаження" #: ../loader2/driverdisk.c:134 msgid "Reading driver disk..." msgstr "Зчитується диск драйверів..." #: ../loader2/driverdisk.c:276 ../loader2/driverdisk.c:308 msgid "Driver Disk Source" msgstr "Джерело диску драйверів" #: ../loader2/driverdisk.c:277 msgid "" "You have multiple devices which could serve as sources for a driver disk. " "Which would you like to use?" msgstr "" "В вашій системі є декілька пристроїв, в які може бути вставлений диск " "драйверів. Який пристрій використовувати?" #: ../loader2/driverdisk.c:309 msgid "" "There are multiple partitions on this device which could contain the driver " "disk image. Which would you like to use?" msgstr "" "На цьому пристрої є декілька розділів, які можуть містити диск драйверів. " "Який розділ використовувати?" #: ../loader2/driverdisk.c:347 msgid "Failed to mount partition." msgstr "Помилка підключення розділу." #: ../loader2/driverdisk.c:355 msgid "Select driver disk image" msgstr "Виберіть образ диску драйверів" #: ../loader2/driverdisk.c:356 msgid "Select the file which is your driver disk image." msgstr "Виберіть файл, який є вашим образом диску драйверів." #: ../loader2/driverdisk.c:385 msgid "Failed to load driver disk from file." msgstr "Помилка завантаження диску драйверів з файлу." #: ../loader2/driverdisk.c:396 #, c-format msgid "Insert your driver disk into /dev/%s and press \"OK\" to continue." msgstr "" "Вставте диск драйверів у /dev/%s та натисніть \"Гаразд\" для продовження." #: ../loader2/driverdisk.c:398 msgid "Insert Driver Disk" msgstr "Вставте диск драйверів" #: ../loader2/driverdisk.c:413 msgid "Failed to mount driver disk." msgstr "Помилка підключення диску драйверів." #: ../loader2/driverdisk.c:423 #, c-format msgid "Driver disk is invalid for this release of %s." msgstr "Диск з драйверам є некоректним для цього випуску %s." #: ../loader2/driverdisk.c:486 msgid "Manually choose" msgstr "Вибрати вручну" #: ../loader2/driverdisk.c:487 msgid "Load another disk" msgstr "Завантажити інший диск" #: ../loader2/driverdisk.c:488 msgid "" "No devices of the appropriate type were found on this driver disk. Would " "you like to manually select the driver, continue anyway, or load another " "driver disk?" msgstr "" "На диску драйверів не було знайдено пристроїв даного типу. Бажаєте вибрати " "драйвер вручну, продовжити у будь-якому разі чи завантажити інший диск " "драйверів?" #: ../loader2/driverdisk.c:526 msgid "Driver disk" msgstr "Диск драйверів" #: ../loader2/driverdisk.c:527 msgid "Do you have a driver disk?" msgstr "У вас є диск з драйвером?" #: ../loader2/driverdisk.c:536 msgid "More Driver Disks?" msgstr "Додаткові диски" #: ../loader2/driverdisk.c:537 msgid "Do you wish to load any more driver disks?" msgstr "Завантажити додаткові диски драйверів?" #: ../loader2/driverdisk.c:583 ../loader2/driverdisk.c:620 #: ../loader2/hdinstall.c:404 ../loader2/kickstart.c:127 #: ../loader2/kickstart.c:137 ../loader2/kickstart.c:180 #: ../loader2/kickstart.c:523 ../loader2/modules.c:1036 #: ../loader2/modules.c:1049 ../loader2/net.c:1597 ../loader2/net.c:1620 #: ../loader2/nfsinstall.c:251 ../loader2/urlinstall.c:464 #: ../loader2/urlinstall.c:473 ../loader2/urlinstall.c:484 msgid "Kickstart Error" msgstr "Помилка kickstart" #: ../loader2/driverdisk.c:584 #, c-format msgid "Unknown driver disk kickstart source: %s" msgstr "Невідоме джерело драйвера диска kickstart: %s" #: ../loader2/driverdisk.c:621 #, c-format msgid "" "The following invalid argument was specified for the kickstart driver disk " "command: %s:%s" msgstr "" "Вказано неправильний аргумент для команди драйвера диску kickstart: %s:%s" #: ../loader2/driverselect.c:60 #, c-format msgid "" "Please enter any parameters which you wish to pass to the %s module " "separated by spaces. If you don't know what parameters to supply, skip this " "screen by pressing the \"OK\" button." msgstr "" "Вкажіть перелік розділених пробілами параметрів, які ви хочете передати " "модулю %s. Якщо ви не знаєте які параметри передавати модулю, пропустіть цей " "екран, натиснувши клавішу \"Гаразд\". Перелік доступних параметрів можна " "отримати натиснувши на клавішу F1." #: ../loader2/driverselect.c:80 msgid "Enter Module Parameters" msgstr "Введіть параметри модуля" #: ../loader2/driverselect.c:179 msgid "No drivers found" msgstr "Драйвери не знайдено" #: ../loader2/driverselect.c:179 msgid "Load driver disk" msgstr "Завантаження диску драйверів" #: ../loader2/driverselect.c:180 msgid "" "No drivers were found to manually insert. Would you like to use a driver " "disk?" msgstr "" "Драйвери для завантаження вручну не знайдено. Використовувати диск драйверів?" #: ../loader2/driverselect.c:198 msgid "" "Please select the driver below which you wish to load. If it does not " "appear and you have a driver disk, press F2." msgstr "" "Виберіть з переліку драйвер, який потрібно завантажити. Якщо драйвер " "відсутній у переліку та у вас є диск драйверів, натисніть F2." #: ../loader2/driverselect.c:206 msgid "Specify optional module arguments" msgstr "Вказати додаткові параметри модулів" #: ../loader2/driverselect.c:226 msgid "Select Device Driver to Load" msgstr "Виберіть драйвер пристрою" #: ../loader2/firewire.c:55 ../loader2/windows.c:57 #, c-format msgid "Loading %s driver..." msgstr "Завантажується драйвер %s..." #: ../loader2/hdinstall.c:102 ../loader2/nfsinstall.c:198 #: ../loader2/urlinstall.c:151 #, c-format msgid "" "The %s installation tree in that directory does not seem to match your boot " "media." msgstr "" "Дерево встановлення %s у цьому каталозі не відповідає вашому " "завантажувальному диску." #: ../loader2/hdinstall.c:158 msgid "" "An error occured reading the install from the ISO images. Please check your " "ISO images and try again." msgstr "" "Помилка читання програми встановлення з образів ISO. Перевірте ваші образи " "ISO та спробуйте ще раз." #: ../loader2/hdinstall.c:266 msgid "" "You don't seem to have any hard drives on your system! Would you like to " "configure additional devices?" msgstr "" "У вашій системі не виявлено жодного жорсткого диску! Бажаєте настроїти " "додаткові пристрої?" #: ../loader2/hdinstall.c:280 #, c-format msgid "" "What partition and directory on that partition hold the CD (iso9660) images " "for %s? If you don't see the disk drive you're using listed here, press F2 " "to configure additional devices." msgstr "" "Вкажіть розділ та каталог на цьому розділі, які містять образи CD (iso9660) " "для %s. Якщо необхідний диск відсутній у списку, натисніть F2 для " "налаштовування додаткових пристроїв." #: ../loader2/hdinstall.c:303 msgid "Directory holding images:" msgstr "Каталог, що містить образи:" #: ../loader2/hdinstall.c:331 msgid "Select Partition" msgstr "Вибір розділу" #: ../loader2/hdinstall.c:370 #, c-format msgid "Device %s does not appear to contain %s CDROM images." msgstr "Пристрій %s не містить образи %s CDROM." #: ../loader2/hdinstall.c:405 #, c-format msgid "Bad argument to HD kickstart method command %s: %s" msgstr "Неприпустимий аргумент команди kickstart HD-методу %s: %s" #: ../loader2/hdinstall.c:475 ../loader2/hdinstall.c:531 msgid "Cannot find kickstart file on hard drive." msgstr "Не вдається знайти файл на жорсткому диску." #: ../loader2/hdinstall.c:518 #, c-format msgid "Cannot find hard drive for BIOS disk %s" msgstr "Не вдається знайти жорсткий диск відповідний BIOS диску %s" #: ../loader2/kbd.c:129 msgid "Keyboard Type" msgstr "Тип клавіатури" #: ../loader2/kbd.c:130 msgid "What type of keyboard do you have?" msgstr "Вкажіть тип клавіатури" #: ../loader2/kickstart.c:128 #, c-format msgid "Error opening kickstart file %s: %s" msgstr "Помилка відкривання файлу: %s: %s" #: ../loader2/kickstart.c:138 #, c-format msgid "Error reading contents of kickstart file %s: %s" msgstr "Помилка читання вмісту kickstart файлу %s: %s" #: ../loader2/kickstart.c:181 #, c-format msgid "Error in %s on line %d of kickstart file %s." msgstr "Помилка в %s в рядку %d файлу kickstart %s." #: ../loader2/kickstart.c:280 msgid "Cannot find ks.cfg on boot floppy." msgstr "Не вдається знайти ks.cfg на завантажувальній дискеті." #: ../loader2/kickstart.c:371 msgid "" "Unable to download the kickstart file. Please modify the kickstart " "parameter below or press Cancel to proceed as an interactive installation." msgstr "" "Неможливо завантажити файл kickstart. Змініть параметр kickstart чи " "натисніть Скасувати для продовження в інтерактивному режимі." #: ../loader2/kickstart.c:380 msgid "Error downloading kickstart file" msgstr "Помилка відкривання файлу kickstart" #: ../loader2/kickstart.c:524 #, c-format msgid "Bad argument to shutdown kickstart method command %s: %s" msgstr "Неприпустимий аргумент команди kickstart для вимкнення %s: %s" #: ../loader2/lang.c:56 #, c-format msgid "Welcome to %s - Rescue Mode" msgstr "Ласкаво просимо до %s - режим відновлення" #: ../loader2/lang.c:57 ../loader2/loader.c:159 msgid "" " / between elements | selects | next screen " msgstr "" " / між елементами | <Пробіл> вибір | наступний екран " #: ../loader2/lang.c:366 msgid "Choose a Language" msgstr "Виберіть мову" #: ../loader2/loader.c:118 msgid "Local CD/DVD" msgstr "Локальний CD/DVD" #: ../loader2/loader.c:120 msgid "Hard drive" msgstr "Жорсткий диск" #: ../loader2/loader.c:121 msgid "NFS directory" msgstr "Каталог NFS" #: ../loader2/loader.c:337 msgid "Update Disk Source" msgstr "Диск з оновленням" #: ../loader2/loader.c:338 msgid "" "You have multiple devices which could serve as sources for an update disk. " "Which would you like to use?" msgstr "" "В вашій системі є декілька пристроїв, кожен з яких може служити джерелом " "диску оновлень. Який пристрій використовувати?" #: ../loader2/loader.c:353 #, c-format msgid "Insert your updates disk into /dev/%s and press \"OK\" to continue." msgstr "" "Вставте диск оновлень у /dev/%s та натисніть \"Гаразд\" для продовження." #: ../loader2/loader.c:355 msgid "Updates Disk" msgstr "Диск з оновленнями" #: ../loader2/loader.c:367 msgid "Failed to mount updates disk" msgstr "Помилка підключення диску оновлень" #: ../loader2/loader.c:370 msgid "Updates" msgstr "Оновлення" #: ../loader2/loader.c:370 msgid "Reading anaconda updates..." msgstr "Зчитування оновлень anaconda..." #: ../loader2/loader.c:412 msgid "" "No hard drives have been found. You probably need to manually choose device " "drivers for the installation to succeed. Would you like to select drivers " "now?" msgstr "" "Жорсткі диски не було знайдено. Можливо, вам необхідно вручну вказати " "драйвери пристроїв для продовження встановлення. Бажаєте вибрати драйвери " "зараз?" #: ../loader2/loader.c:849 #, c-format msgid "You do not have enough RAM to install %s on this machine." msgstr "Недостатньо оперативної пам'яті для встановлення %s на цій машині." #: ../loader2/loader.c:1008 msgid "Rescue Method" msgstr "Метод відновлення" #: ../loader2/loader.c:1009 msgid "Installation Method" msgstr "Метод встановлення" #: ../loader2/loader.c:1011 msgid "What type of media contains the rescue image?" msgstr "Який носій містить образ відновлення?" #: ../loader2/loader.c:1013 msgid "What type of media contains the packages to be installed?" msgstr "Носій якого типу містить пакети для встановлення?" #: ../loader2/loader.c:1037 msgid "No driver found" msgstr "Драйвер не знайдено" #: ../loader2/loader.c:1037 msgid "Select driver" msgstr "Виберіть драйвер" #: ../loader2/loader.c:1038 msgid "Use a driver disk" msgstr "Використовувати диск драйверів" #: ../loader2/loader.c:1039 msgid "" "Unable to find any devices of the type needed for this installation type. " "Would you like to manually select your driver or use a driver disk?" msgstr "" "Не вдається знайти жоден пристрій, необхідний для цього типу встановлення. " "Бажаєте вибрати драйвер вручну чи використати диск драйверів?" #: ../loader2/loader.c:1258 msgid "The following devices have been found on your system." msgstr "У вашій системі виявлено наступні пристрої." #: ../loader2/loader.c:1260 msgid "" "No device drivers have been loaded for your system. Would you like to load " "any now?" msgstr "" "Не було завантажено жодного драйвера пристроїв. Бажаєте зараз завантажити " "якийсь драйвер?" #: ../loader2/loader.c:1264 msgid "Devices" msgstr "Пристрої" #: ../loader2/loader.c:1265 msgid "Done" msgstr "Готово" #: ../loader2/loader.c:1266 msgid "Add Device" msgstr "Додати пристрій" #: ../loader2/loader.c:1437 #, c-format msgid "loader has already been run. Starting shell.\n" msgstr "Завантажувач вже виконується. Запускається оболонка.\n" #: ../loader2/loader.c:1823 #, c-format msgid "Running anaconda, the %s rescue mode - please wait...\n" msgstr "" "Запускається anaconda, режим відновлення %s - зачекайте, будь ласка...\n" #: ../loader2/loader.c:1825 #, c-format msgid "Running anaconda, the %s system installer - please wait...\n" msgstr "" "Запускається anaconda, програма встановлення %s - зачекайте, будь ласка...\n" #: ../loader2/mediacheck.c:330 msgid "" "Unable to read the disc checksum from the primary volume descriptor. This " "probably means the disc was created without adding the checksum." msgstr "" "Не вдається прочитати контрольну суму диска з первинного дескриптора тому. " "Швидше за все це означає, що диск створений без додавання контрольної суми." #: ../loader2/mediacheck.c:338 #, c-format msgid "Checking \"%s\"..." msgstr "Перевіряється \"%s\"..." #: ../loader2/mediacheck.c:340 #, c-format msgid "Checking media now..." msgstr "Перевіряється носій..." #: ../loader2/mediacheck.c:387 #, c-format msgid "Unable to find install image %s" msgstr "Не вдається знайти образ встановлення %s" #: ../loader2/mediacheck.c:397 ../loader2/mediacheck.c:414 msgid "FAILED" msgstr "ПОМИЛКА" #: ../loader2/mediacheck.c:398 msgid "" "The image which was just tested has errors. This could be due to a corrupt " "download or a bad disc. If applicable, please clean the disc and try " "again. If this test continues to fail you should not continue the install." msgstr "" "Щойно перевірений образ містить помилки. Можлива причина - збій при " "завантаженні або пошкоджений диск. Якщо це можливо, протріть диск та " "спробуйте ще раз. Якщо помилка повторюється, встановлення не слід " "продовжувати." #: ../loader2/mediacheck.c:408 msgid "PASSED" msgstr "БЕЗ ПОМИЛОК" #: ../loader2/mediacheck.c:409 msgid "It is OK to install from this media." msgstr "Перевірка цього носія успішно завершена." #: ../loader2/mediacheck.c:415 msgid "No checksum information available, unable to verify media." msgstr "Контрольні суми недоступні, перевірка неможлива." #: ../loader2/mediacheck.c:420 msgid "Media Check Result" msgstr "Результати перевірки носія" #: ../loader2/mediacheck.c:424 #, c-format msgid "" "%s for the image:\n" "\n" " %s" msgstr "" "%s для образу:\n" "\n" " %s" #: ../loader2/mediacheck.c:428 #, c-format msgid "" "The media check %s\n" "\n" "%s" msgstr "" "Перевірка носія %s\n" "\n" "%s" #: ../loader2/method.c:419 #, c-format msgid "" "Would you like to perform a checksum test of the ISO image:\n" "\n" " %s?" msgstr "" "Ви бажаєте перевірити контрольну суму образа ISO:\n" "\n" " %s?" #: ../loader2/method.c:422 msgid "Checksum Test" msgstr "Перевірка контрольної суми" #: ../loader2/modules.c:1037 #, c-format msgid "Bad argument to device kickstart method command %s: %s" msgstr "Неправильний аргумент для команди kickstart-методу встановлення %s: %s" #: ../loader2/modules.c:1050 msgid "" "Both module type and name must be specified for the kickstart device command." msgstr "Команді kickstart потрібно передати тип модуля та його назву." #: ../loader2/net.c:59 #, c-format msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your %s server\n" " o the directory on that server containing\n" " %s for your architecture\n" msgstr "" "Введіть наступну інформацію:\n" "\n" " o назву або адресу IP вашого %s сервера\n" " o каталог на цьому сервері, що містить\n" " дистрибутив %s для вашої архітектури\n" #: ../loader2/net.c:98 msgid "" "Prefix must be between 1 and 32 for IPv4 networks or between 1 and 128 for " "IPv6 networks" msgstr "" "Значення префіксу має бути у межах від 1 до 32 для мереж IPv4 чи від 1 до " "128 для мереж IPv6" #: ../loader2/net.c:261 #, c-format msgid "" "%s is a wireless network adapter. Please provide the ESSID and encryption " "key needed to access your wireless network. If no key is needed, leave this " "field blank and the install will continue." msgstr "" "%s є адаптером бездротового зв'язку. Вкажіть ESSID та ключ шифрування, які " "потрібні для доступу до бездротової мережі. Якщо ключ не використовується, " "залиште це поле порожнім та продовжуйте встановлення." #: ../loader2/net.c:267 msgid "ESSID" msgstr "ESSID" #: ../loader2/net.c:268 msgid "Encryption Key" msgstr "Ключ шифрування" #: ../loader2/net.c:271 msgid "Wireless Settings" msgstr "Параметри бездротового зв'язку" #: ../loader2/net.c:302 msgid "Nameserver IP" msgstr "IP DNS сервера" #: ../loader2/net.c:306 msgid "Missing Nameserver" msgstr "Не вказано сервер DNS" #: ../loader2/net.c:307 msgid "" "Your IP address request returned configuration information, but it did not " "include a nameserver address. If you do not have this information, you can " "leave the field blank and the install will continue." msgstr "" "Запит на отримання динамічної IP адреси повернув конфігурацію IP, але вона " "не містить дані про сервер DNS. Якщо ви знаєте адресу сервера DNS, введіть " "її зараз. Якщо такої інформації немає, можете залишити це поле порожнім, і " "встановлення продовжиться." #: ../loader2/net.c:329 msgid "Invalid IP Information" msgstr "Неприпустима інформація про IP" #: ../loader2/net.c:330 msgid "You entered an invalid IP address." msgstr "Ви ввели неприпустиму IP-адресу." #: ../loader2/net.c:583 ../loader2/net.c:691 msgid "Network Error" msgstr "Помилка мережі" #: ../loader2/net.c:584 ../loader2/net.c:692 msgid "There was an error configuring your network interface." msgstr "Помилка при налаштовуванні мережного інтерфейсу." #: ../loader2/net.c:765 msgid "Configure TCP/IP" msgstr "Налаштовування TCP/IP" #: ../loader2/net.c:792 msgid "You must select at least one protocol (IPv4 or IPv6)." msgstr "Необхідно вибрати принаймні один протокол (IPv4 чи IPv6)." #: ../loader2/net.c:799 msgid "IPv4 Needed for NFS" msgstr "Для NFS вимагається IPv4 " #: ../loader2/net.c:800 msgid "NFS installation method requires IPv4 support." msgstr "Метод встановлення NFS вимагає увімкнення підтримки IPv4." #: ../loader2/net.c:920 msgid "IPv4 address:" msgstr "Адреса IPv4:" #: ../loader2/net.c:932 ../loader2/net.c:984 tmp/netconfig.glade.h:1 #: tmp/netpostconfig.glade.h:1 msgid "/" msgstr "/" #: ../loader2/net.c:972 msgid "IPv6 address:" msgstr "Адреса IPv6:" #: ../loader2/net.c:1033 msgid "Name Server:" msgstr "Сервер назв:" #: ../loader2/net.c:1069 msgid "" "Enter the IPv4 and/or the IPv6 address and prefix (address / prefix). For " "IPv4, the dotted-quad netmask or the CIDR-style prefix are acceptable. The " "gateway and name server fields must be valid IPv4 or IPv6 addresses." msgstr "" "Введіть адресу IPv4 та/або IPv6 та префікс (адресу / префікс). Для IPv4 " "можна використовувати маску з точками у якості розділювачів та префікс у " "стилі CIDR. Поля для шлюзу та сервера імен повинні містити коректні адреси " "IPv4 та IPv6." #: ../loader2/net.c:1085 msgid "Manual TCP/IP Configuration" msgstr "Ручне налаштовування TCP/IP" #: ../loader2/net.c:1193 ../loader2/net.c:1199 msgid "Missing Information" msgstr "Недостатньо інформації" #: ../loader2/net.c:1194 msgid "" "You must enter both a valid IPv4 address and a network mask or CIDR prefix." msgstr "Необхідно ввести правильну IP-адресу та маску мережі або префікс CIDR." #: ../loader2/net.c:1200 msgid "You must enter both a valid IPv6 address and a CIDR prefix." msgstr "Необхідно ввести правильну адресу IPv6 та префікс CIDR." #: ../loader2/net.c:1505 msgid "Determining host name and domain..." msgstr "Визначення назви комп'ютера та домену..." #: ../loader2/net.c:1598 #, c-format msgid "Bad argument to kickstart network command %s: %s" msgstr "Неприпустимий аргумент мережної команди kickstart %s: %s" #: ../loader2/net.c:1621 #, c-format msgid "Bad bootproto %s specified in network command" msgstr "В мережній команді неправильно вказано bootproto %s" #: ../loader2/net.c:1802 msgid "Networking Device" msgstr "Пристрій мережі" #: ../loader2/net.c:1803 msgid "" "You have multiple network devices on this system. Which would you like to " "install through?" msgstr "" "В цій системі є декілька мережних адаптерів. Який з них повинен " "використовуватись для встановлення?" #: ../loader2/nfsinstall.c:47 msgid "NFS server name:" msgstr "Назва сервера NFS:" #: ../loader2/nfsinstall.c:50 ../loader2/urls.c:313 #, c-format msgid "%s directory:" msgstr "Каталог %s:" #: ../loader2/nfsinstall.c:55 msgid "NFS" msgstr "NFS" #: ../loader2/nfsinstall.c:56 msgid "NFS Setup" msgstr "Налаштовування NFS" #: ../loader2/nfsinstall.c:126 msgid "Hostname specified with no DNS configured" msgstr "Вказано назву вузла без налаштовування DNS" #: ../loader2/nfsinstall.c:202 #, c-format msgid "That directory does not seem to contain a %s installation tree." msgstr "Цей каталог не містить дерево встановлення %s." #: ../loader2/nfsinstall.c:214 msgid "That directory could not be mounted from the server." msgstr "Цей каталог не може бути підключений з сервера." #: ../loader2/nfsinstall.c:252 #, c-format msgid "Bad argument to NFS kickstart method command %s: %s" msgstr "Неправильний аргумент команди kickstart методу NFS %s: %s" #: ../loader2/telnetd.c:83 ../loader2/telnetd.c:125 msgid "Telnet" msgstr "Telnet" #: ../loader2/telnetd.c:83 msgid "Waiting for telnet connection..." msgstr "Очікується з'єднання telnet..." #: ../loader2/telnetd.c:125 msgid "Running anaconda via telnet..." msgstr "anaconda запускається по telnet..." #: ../loader2/urlinstall.c:69 #, c-format msgid "Unable to retrieve %s://%s/%s/%s." msgstr "Не вдається отримати %s://%s/%s/%s." #: ../loader2/urlinstall.c:143 msgid "Unable to retrieve the install image." msgstr "Не вдається отримати образ встановлення." #: ../loader2/urlinstall.c:288 msgid "Media Detected" msgstr "Знайдено носій" #: ../loader2/urlinstall.c:289 msgid "Local installation media detected..." msgstr "Знайдено локальний носій встановлення..." #: ../loader2/urlinstall.c:465 #, c-format msgid "Bad argument to Url kickstart method command %s: %s" msgstr "Неправильний аргумент команди kickstart методу URL %s: %s" #: ../loader2/urlinstall.c:474 msgid "Must supply a --url argument to Url kickstart method." msgstr "Для методу URL команди kickstart необхідно передати параметр --url." #: ../loader2/urlinstall.c:485 #, c-format msgid "Unknown Url method %s" msgstr "Невідомий метод URL: %s" #: ../loader2/urls.c:219 msgid "Retrieving" msgstr "Отримання" #: ../loader2/urls.c:286 msgid "FTP" msgstr "FTP" #: ../loader2/urls.c:291 msgid "Web" msgstr "Веб" #: ../loader2/urls.c:308 msgid "FTP site name:" msgstr "Назва сервера FTP:" #: ../loader2/urls.c:309 msgid "Web site name:" msgstr "Назва Web-сервера:" #: ../loader2/urls.c:328 msgid "Use non-anonymous ftp" msgstr "Використовувати авторизований ftp" #: ../loader2/urls.c:337 msgid "FTP Setup" msgstr "Налаштовування FTP" #: ../loader2/urls.c:338 msgid "HTTP Setup" msgstr "Налаштовування HTTP" #: ../loader2/urls.c:348 msgid "You must enter a server name." msgstr "Ви маєте ввести назву сервера." #: ../loader2/urls.c:353 msgid "You must enter a directory." msgstr "Ви маєте ввести каталог." #: ../loader2/urls.c:358 msgid "Unknown Host" msgstr "Невідомий сервер" #: ../loader2/urls.c:359 #, c-format msgid "%s is not a valid hostname." msgstr "%s не є припустимою назвою сервера." #: ../loader2/urls.c:430 msgid "" "If you are using non anonymous ftp, enter the account name and password you " "wish to use below." msgstr "" "Якщо ви не використовуєте анонімний ftp, введіть ім'я користувача та пароль, " "які ви бажаєте використовувати." #: ../loader2/urls.c:435 msgid "" "If you are using a HTTP proxy server enter the name of the HTTP proxy server " "to use." msgstr "" "Якщо ви використовуєте HTTP проксі-сервер, вкажіть його назву або адресу IP." "назву сервера." #: ../loader2/urls.c:457 msgid "Account name:" msgstr "Назва облікового запису:" #: ../loader2/urls.c:480 msgid "Further FTP Setup" msgstr "Подальше налаштовування FTP" #: ../loader2/urls.c:483 msgid "Further HTTP Setup" msgstr "Подальше налаштовування HTTP" #: ../loader2/windows.c:56 msgid "Loading SCSI driver" msgstr "Завантаження SCSI драйвера" #: tmp/adddrive.glade.h:1 msgid "Add _ZFCP LUN" msgstr "Додати _ZFCP LUN" #: tmp/adddrive.glade.h:2 msgid "Add _iSCSI target" msgstr "Додати пристрій _iSCSI" #: tmp/adddrive.glade.h:4 msgid "Disable _dmraid device" msgstr "_Вимкнути пристрій dmraid" #: tmp/adddrive.glade.h:6 msgid "_Add drive" msgstr "_Додати диск" #: tmp/addrepo.glade.h:1 msgid "Repository _URL:" msgstr "_URL сховища:" #: tmp/addrepo.glade.h:2 msgid "Repository _name:" msgstr "_Назва репозиторію:" #: tmp/addrepo.glade.h:3 msgid "Add Repository" msgstr "Додати репозиторій" #: tmp/addrepo.glade.h:5 #, no-c-format msgid "" "Please provide the location where your additional software can be installed " "from. Note that this must be a valid repository for %s." msgstr "" "Вкажіть адресу, звідки можна виконати встановлення додаткового програмного " "забезпечення. Має бути коректним репозиторієм для %s." #: tmp/addrepo.glade.h:6 msgid "_Add repository" msgstr "_Додати репозиторій" #: tmp/anaconda.glade.h:1 msgid "Reboo_t" msgstr "_Перезавантаження" #: tmp/anaconda.glade.h:3 msgid "_Next" msgstr "_Далі" #: tmp/anaconda.glade.h:4 msgid "_Release Notes" msgstr "При_мітки до випуску" #: tmp/autopart.glade.h:1 msgid "" "Installation requires partitioning of your hard drive. By default, a " "partitioning layout is chosen which is reasonable for most users. You can " "either choose to use this or create your own." msgstr "" "Для встановлення потрібні розділи на вашому жорсткому диску. Початково, " "вибрано розподіл, оптимальний для більшості користувачів. Проте, ви можете " "створити розділи вручну." #: tmp/autopart.glade.h:2 msgid "Re_view and modify partitioning layout" msgstr "_Перегляд та зміна розподілу розділів" #: tmp/autopart.glade.h:3 msgid "What drive would you like to boot this installation from?" msgstr "З якого диску ви хочете запустити встановлення?" #: tmp/autopart.glade.h:4 msgid "_Advanced storage configuration" msgstr "_Додаткові параметри накопичувачів" #: tmp/autopart.glade.h:5 msgid "_Select the drive(s) to use for this installation." msgstr "_Вкажіть пристрої для цього встановлення." #: tmp/exn.glade.h:1 msgid "Exception Info" msgstr "Інформація про виключну ситуацію" #: tmp/exn.glade.h:2 msgid "Save to _Remote" msgstr "Зберегти на _віддалену систему" #: tmp/exn.glade.h:4 msgid "_Exception details" msgstr "Д_окладніше про виключну ситуацію" #: tmp/exn.glade.h:5 msgid "_Save to floppy" msgstr "З_берегти на дискету" #: tmp/instkey.glade.h:2 #, no-c-format msgid "%(instkey)s:" msgstr "%(instkey)s:" #: tmp/instkey.glade.h:4 #, no-c-format msgid "Please enter your %(instkey)s." msgstr "Введіть ваш %(instkey)s." #: tmp/iscsi-config.glade.h:1 msgid "_Password:" msgstr "_Пароль:" #: tmp/iscsi-config.glade.h:2 msgid "_Target IP Address:" msgstr "_Цільова адреса IP:" #: tmp/iscsi-config.glade.h:3 msgid "_Username:" msgstr "_Ім'я користувача:" #: tmp/iscsi-config.glade.h:4 msgid "iSCSI Initiator _Name:" msgstr "_Назва ініціатора iSCSI:" #: tmp/iscsi-config.glade.h:7 msgid "_Add target" msgstr "_Додати пристрій" #: tmp/liveinst.desktop.in.h:1 msgid "Install" msgstr "Встановити" #: tmp/liveinst.desktop.in.h:2 msgid "Install the live CD to your hard disk" msgstr "Встановити з Live CD на жорсткий диск" #: tmp/liveinst.desktop.in.h:3 msgid "Install to Hard Drive" msgstr "Встановити на жорсткий диск" #: tmp/netconfig.glade.h:2 msgid "Gateway:" msgstr "Шлюз:" #: tmp/netconfig.glade.h:3 msgid "IPv4 Address:" msgstr "Адреса IPv4:" #: tmp/netconfig.glade.h:4 msgid "IPv6 Address:" msgstr "Адреса IPv6:" #: tmp/netconfig.glade.h:5 msgid "Nameserver:" msgstr "DNS сервер:" #: tmp/netconfig.glade.h:6 msgid "_Interface:" msgstr "_Інтерфейс:" #: tmp/netconfig.glade.h:7 msgid "Enable IPv_4 support" msgstr "Увімкнути підтримку IPv_4" #: tmp/netconfig.glade.h:8 msgid "Enable IPv_6 support" msgstr "Увімкнути підтримку IPv_6" #: tmp/netconfig.glade.h:9 msgid "Enable network interface" msgstr "Увімкнути _мережний інтерфейс" #: tmp/netconfig.glade.h:10 msgid "" "This requires that you have an active network connection during the " "installation process. Please configure a network interface." msgstr "" "Для цього треба активне мережне з'єднання протягом процесу встановлення. " "Налаштуйте мережний інтерфейс." #: tmp/netconfig.glade.h:11 msgid "Use _dynamic IP configuration (DHCP)" msgstr "_Динамічне налаштовування IP (DHCP)" #: tmp/netpostconfig.glade.h:2 msgid "Description Goes Here" msgstr "Опис знаходиться тут" #: tmp/netpostconfig.glade.h:3 msgid "Hardware address: DE:AD:00:BE:EF:00" msgstr "Апаратна адреса: DE:AD:00:BE:EF:00" #: tmp/netpostconfig.glade.h:8 msgid "Edit Interface" msgstr "Правка інтерфейсу" #: tmp/netpostconfig.glade.h:11 msgid "Encryption Key:" msgstr "Ключ шифрування:" #: tmp/netpostconfig.glade.h:13 msgid "Manual configuration" msgstr "Ручне налаштовування" #: tmp/netpostconfig.glade.h:14 msgid "Point to Point (IP):" msgstr "Точка-точка (IP):" #: tmp/tasksel.glade.h:1 msgid "Customize _later" msgstr "Уточнити _пізніше" #: tmp/tasksel.glade.h:2 msgid "" "Please select any additional repositories that you want to use for software " "installation." msgstr "" "Виберіть додаткові репозиторії, які слід використовувати при встановленні." #: tmp/tasksel.glade.h:5 msgid "" "You can further customize the software selection now, or after install via " "the software management application." msgstr "" "Подальше уточнення вибраних програм можна зробити зараз, або після " "встановлення засобом встановлення програм." #: tmp/tasksel.glade.h:6 msgid "_Add additional software repositories" msgstr "_Додати додаткові репозиторії" #: tmp/tasksel.glade.h:7 msgid "_Customize now" msgstr "_Уточнити зараз" #: tmp/zfcp-config.glade.h:1 msgid "Device number:" msgstr "Номер пристрою:" #: tmp/zfcp-config.glade.h:2 msgid "FCP LUN:" msgstr "FCP LUN:" #: tmp/zfcp-config.glade.h:3 msgid "WWPN:" msgstr "WWPN:" #: tmp/zfcp-config.glade.h:4 msgid "Add FCP device" msgstr "Додати FCP пристрій" #. generated from lang-table msgid "Afrikaans" msgstr "Африканс" #. generated from lang-table msgid "Arabic" msgstr "Арабська" #. generated from lang-table msgid "Assamese" msgstr "Ассамська" #. generated from lang-table msgid "Bengali" msgstr "Бенгальська" #. generated from lang-table msgid "Bengali(India)" msgstr "Бенгальська(Індія)" #. generated from lang-table msgid "Bulgarian" msgstr "Болгарська" #. generated from lang-table msgid "Catalan" msgstr "Каталонська" #. generated from lang-table msgid "Chinese(Simplified)" msgstr "Китайська(Спрощена)" #. generated from lang-table msgid "Chinese(Traditional)" msgstr "Китайська(традиційна)" #. generated from lang-table msgid "Croatian" msgstr "Хорватська" #. generated from lang-table msgid "Czech" msgstr "Чеська" #. generated from lang-table msgid "Danish" msgstr "Датська" #. generated from lang-table msgid "Dutch" msgstr "Голландська" #. generated from lang-table msgid "English" msgstr "Англійська" #. generated from lang-table msgid "Estonian" msgstr "Естонська" #. generated from lang-table msgid "Finnish" msgstr "Фінська" #. generated from lang-table msgid "French" msgstr "Французька" #. generated from lang-table msgid "German" msgstr "Німецька" #. generated from lang-table msgid "Greek" msgstr "Грецька" #. generated from lang-table msgid "Gujarati" msgstr "Гуяраті" #. generated from lang-table msgid "Hindi" msgstr "Хінді" #. generated from lang-table msgid "Hungarian" msgstr "Угорська" #. generated from lang-table msgid "Icelandic" msgstr "Ісландська" #. generated from lang-table msgid "Iloko" msgstr "Ілокійська" #. generated from lang-table msgid "Indonesian" msgstr "Індонезійська" #. generated from lang-table msgid "Italian" msgstr "Італійська" #. generated from lang-table msgid "Japanese" msgstr "Японська" #. generated from lang-table msgid "Kannada" msgstr "Каннада" #. generated from lang-table msgid "Korean" msgstr "Корейська" #. generated from lang-table msgid "Macedonian" msgstr "Македонська" #. generated from lang-table msgid "Malay" msgstr "Малайська" #. generated from lang-table msgid "Malayalam" msgstr "Малаялам" #. generated from lang-table msgid "Marathi" msgstr "Мараті" #. generated from lang-table msgid "Norwegian" msgstr "Норвезька" #. generated from lang-table msgid "Northern Sotho" msgstr "Північний Сото" #. generated from lang-table msgid "Oriya" msgstr "Орія" #. generated from lang-table msgid "Persian" msgstr "Персидська" #. generated from lang-table msgid "Polish" msgstr "Польська" #. generated from lang-table msgid "Portuguese" msgstr "Португальська" #. generated from lang-table msgid "Portuguese(Brazilian)" msgstr "Португальська(Бразильська)" #. generated from lang-table msgid "Punjabi" msgstr "Панджабська" #. generated from lang-table msgid "Romanian" msgstr "Румунська" #. generated from lang-table msgid "Russian" msgstr "Російська" #. generated from lang-table msgid "Serbian" msgstr "Сербська" #. generated from lang-table msgid "Serbian(Latin)" msgstr "Сербська(Латина)" #. generated from lang-table msgid "Sinhala" msgstr "Сенегальська" #. generated from lang-table msgid "Slovak" msgstr "Словацька" #. generated from lang-table msgid "Slovenian" msgstr "Словенська" #. generated from lang-table msgid "Spanish" msgstr "Іспанська" #. generated from lang-table msgid "Swedish" msgstr "Шведська" #. generated from lang-table msgid "Tamil" msgstr "Тамільська" #. generated from lang-table msgid "Telugu" msgstr "Телугу" #. generated from lang-table msgid "Turkish" msgstr "Турецька" #. generated from lang-table msgid "Ukrainian" msgstr "Українська" #. generated from lang-table msgid "Vietnamese" msgstr "В'єтнамська" #. generated from lang-table msgid "Welsh" msgstr "Уельська" #. generated from lang-table msgid "Zulu" msgstr "Зулу" #~ msgid "Rebooting System" #~ msgstr "Перезавантаження" #~ msgid "Re_try" #~ msgstr "Повт_орити"