# translation of anaconda.master.or.po to Oriya # translation of or.po to # Oriya translation of anaconda.pot # Copyright (C) 2006, Red Hat Inc. # This file is distributed under the same license as the PACKAGE package. # # Subhransu Behera , 2006, 2007. # Subhransu Behera , 2007. # Manoj Kumar Giri , 2008. msgid "" msgstr "" "Project-Id-Version: anaconda.master.or\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2008-10-13 10:57-0400\n" "PO-Revision-Date: 2008-10-15 14:56+0530\n" "Last-Translator: Manoj Kumar Giri \n" "Language-Team: Oriya\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=2;plural=(n!=1)\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" #: ../anaconda:262 ../anaconda:308 #, c-format msgid "Error processing %%ksappend lines: %s" msgstr "%% କିକ୍-ଷ୍ଟାର୍ଟ ଫାଇଲ କୁ ଖୋଲିବାରେ ତୃଟି: %s" #: ../anaconda:265 ../anaconda:311 #, c-format msgid "Unknown error processing %%ksappend lines: %s" msgstr "%%ksappend lines କୁ ସଂସାଧନ କରିବାରେ ଅଜଣା ତୃଟି: %s" #: ../anaconda:279 ../anaconda:323 ../cmdline.py:85 ../gui.py:1280 #: ../text.py:551 #, c-format, python-format msgid "" "The following error was found while parsing your kickstart configuration:\n" "\n" "%s" msgstr "" "ଆପଣଙ୍କର କିକ୍-ଷ୍ଟାର୍ଟ ବିନ୍ଯାସକୁ ବିଶ୍ଳେଷଣ କରିବା ସମୟରେ ନିମ୍ନଲିଖିତ ତୃଟି ମାନ ପରିଲିଖିତ ହେଲା:\n" "\n" "%s" #: ../anaconda:445 msgid "Press for a shell" msgstr "ଗୋଟିଏ ଆବରଣ ପାଇଁ ଦବାନ୍ତୁ " #: ../anaconda:460 ../gui.py:236 ../rescue.py:276 ../rescue.py:306 #: ../rescue.py:319 ../rescue.py:398 ../rescue.py:407 ../text.py:579 #: ../text.py:736 ../textw/constants_text.py:44 ../textw/network_text.py:77 #: ../textw/network_text.py:86 ../loader/cdinstall.c:219 #: ../loader/cdinstall.c:223 ../loader/cdinstall.c:239 #: ../loader/cdinstall.c:242 ../loader/cdinstall.c:431 #: ../loader/cdinstall.c:438 ../loader/cdinstall.c:503 #: ../loader/dirbrowser.c:145 ../loader/driverdisk.c:100 #: ../loader/driverdisk.c:245 ../loader/driverdisk.c:276 #: ../loader/driverdisk.c:307 ../loader/driverdisk.c:342 #: ../loader/driverdisk.c:361 ../loader/driverdisk.c:373 #: ../loader/driverdisk.c:381 ../loader/driverdisk.c:541 #: ../loader/driverdisk.c:578 ../loader/driverselect.c:81 #: ../loader/driverselect.c:205 ../loader/hdinstall.c:143 #: ../loader/hdinstall.c:289 ../loader/hdinstall.c:352 #: ../loader/hdinstall.c:384 ../loader/hdinstall.c:454 #: ../loader/hdinstall.c:497 ../loader/hdinstall.c:510 ../loader/kbd.c:138 #: ../loader/kickstart.c:132 ../loader/kickstart.c:142 #: ../loader/kickstart.c:185 ../loader/kickstart.c:284 #: ../loader/kickstart.c:375 ../loader/kickstart.c:532 ../loader/lang.c:115 #: ../loader/lang.c:378 ../loader/loader.c:399 ../loader/loader.c:434 #: ../loader/loader.c:472 ../loader/loader.c:493 ../loader/loader.c:509 #: ../loader/loader.c:546 ../loader/loader.c:1182 ../loader/loader.c:1365 #: ../loader/mediacheck.c:62 ../loader/mediacheck.c:101 #: ../loader/mediacheck.c:108 ../loader/mediacheck.c:117 #: ../loader/method.c:280 ../loader/method.c:354 ../loader/modules.c:335 #: ../loader/modules.c:347 ../loader/net.c:515 ../loader/net.c:891 #: ../loader/net.c:1414 ../loader/net.c:1437 ../loader/net.c:1628 #: ../loader/net.c:1650 ../loader/net.c:1662 ../loader/nfsinstall.c:87 #: ../loader/nfsinstall.c:244 ../loader/nfsinstall.c:263 #: ../loader/nfsinstall.c:331 ../loader/telnetd.c:92 ../loader/urlinstall.c:83 #: ../loader/urlinstall.c:107 ../loader/urlinstall.c:175 #: ../loader/urlinstall.c:423 ../loader/urlinstall.c:432 #: ../loader/urlinstall.c:441 ../loader/urls.c:292 ../loader/urls.c:328 #: ../loader/urls.c:334 ../loader/urls.c:346 msgid "OK" msgstr "ଠିକ ଅଛି" #: ../anaconda:467 msgid "" "You do not have enough RAM to use the graphical installer. Starting text " "mode." msgstr "ଆଲେଖୀ ସ୍ଥାପନକୁ ବ୍ଯବହାର କରିବା ପାଇଁ ଆପଣଙ୍କ ପାଖରେ ଯଥେଷ୍ଟ RAM ନାହିଁ। ଅକ୍ଷରାବସ୍ଥାକୁ ଆରମ୍ଭ କରୁଅଛି।" #: ../anaconda:518 msgid "Starting graphical installation..." msgstr "ଆଲେଖୀ ସ୍ଥାପନ ଆରମ୍ଭ କରୁଅଛି..." #: ../anaconda:764 msgid "Would you like to use VNC?" msgstr "ଆପଣ VNC ବ୍ୟବହାର କରିବା ପାଇଁ ଚାହାଁନ୍ତି କି?" #: ../anaconda:765 msgid "" "The VNC mode installation offers more functionality than the text mode, " "would you like to use it instead?" msgstr "" "VNC ସ୍ଥାପନ ପ୍ରଣାଳୀ ପାଠ୍ୟ ଧାରା ଅପେକ୍ଷା ଅଧିକ କାର୍ଯ୍ୟକାରିତା ପ୍ରଦାନ କରିଥାଏ, କଣ ଆପଣ ଏହାକୁ " "ବ୍ୟବହାର କରିବା ପସନ୍ଦ କରିବେ?" #: ../anaconda:790 msgid "Install class forcing text mode installation" msgstr "ସ୍ଥାପନ ଶ୍ରେଣୀ ଅକ୍ଷରାବସ୍ଥା ସ୍ଥାପନ ପାଇଁ ବାଧ୍ଯ କରୁଅଛି" #: ../anaconda:809 msgid "Graphical installation not available... Starting text mode." msgstr "ଆଲେଖୀ ସ୍ଥାପନ ଉପଲବ୍ଧ ନାହିଁ... ଅକ୍ଷରାବସ୍ଥାକୁ ଆରମ୍ଭ କରୁଅଛି" #: ../anaconda:817 msgid "DISPLAY variable not set. Starting text mode!" msgstr "ପ୍ରଦର୍ଶକ ଚଳ ସେଟ ହୋଇନାହିଁ। ଅକ୍ଷରାବସ୍ଥାକୁ ଆରମ୍ଭ କରୁଅଛି!" #: ../autopart.py:892 #, python-format msgid "" "Error resizing partition %s.\n" "\n" "%s" msgstr "" "ବିଭାଜନ %sର ଆକାର ବଦଳାଇବାରେ ତୃଟି.\n" "\n" "%s" #: ../autopart.py:895 #, python-format msgid "Start of partition %s was moved when resizing" msgstr "ଆକାର ବଦଳାଇଲା ବେଳେ ବିଭାଜନ %s ର ଆରମ୍ଭ ସ୍ଥନାନ୍ତରିତ ହୋଇଯାଇଥିଲା" #: ../autopart.py:987 msgid "Could not allocate cylinder-based partitions as primary partitions.\n" msgstr "ସିଲିଣ୍ଡର ଆଧାରିତ ବିଭାଜନକୁ ମୌଳିକ ବିଭାଜନ ଭାବରେ ବାଣ୍ଟି ପାରିଲା ନାହିଁ।\n" #: ../autopart.py:992 msgid "Could not allocate partitions as primary partitions.\n" msgstr "ବିଭାଜନ ମାନଙ୍କୁ ମୌଳିକ ବିଭାଜନ ଭାବରେ ବାଣ୍ଟି ପାରିଲା ନାହିଁ।\n" #: ../autopart.py:997 msgid "Could not allocate cylinder-based partitions.\n" msgstr "ସିଲିଣ୍ଡର ଆଧାରିତ ବିଭାଜନ ମାନଙ୍କୁ ବାଣ୍ଟି ପାରିଲା ନାହିଁ।\n" #: ../autopart.py:1062 #, python-format msgid "" "Boot partition %s doesn't belong to a BSD disk label. SRM won't be able to " "boot from this partition. Use a partition belonging to a BSD disk label or " "change this device disk label to BSD." msgstr "" "%s ବୁଟ୍ ବିଭାଜନଟି BSD ଡିସ୍କ୍ ଚିହ୍ନକର ଅନ୍ତର୍ଭୂକ୍ତ ନୁହଁ | ଏହି ବିଭାଜନରୁ SRM ବୁଟ୍ ହୋଇପାରିବ ନାହିଁ, ତେଣୁ " "BSD ଡିସ୍କ୍ ଚିହ୍ନକର ଅନ୍ତର୍ଭୂକ୍ତ ଗୋଟିଏ ବିଭାଜନକୁ ବ୍ଯବହାର କରନ୍ତୁ କିମ୍ବା ଏହି ଉପକରଣର ଡିସ୍କ୍ ଚିହ୍ନକକୁ BSD " "ରେ ପରିବର୍ତ୍ତନ କରନ୍ତୁ।" #: ../autopart.py:1064 #, python-format msgid "" "Boot partition %s doesn't belong to a disk with enough free space at its " "beginning for the bootloader to live on. Make sure that there's at least 5MB " "of free space at the beginning of the disk that contains /boot" msgstr "" "%s ବୁଟ୍ ବିଭାଜନଟି କୌଣସି ଡିସ୍କ ର ଅନ୍ତର୍ଭୂକ୍ତ ନୁହଁ ଯାହାର ଆରମ୍ଭରେ ବୁଟ୍ଧାରଣର ସାଧନ ପାଇଁ ଯଥେଷ୍ଟ " "ଖାଲିସ୍ଥାନ ଅଛି। ଆପଣ ଏହା ନିଶ୍ଚିତ ହୁଅନ୍ତୁ ଯେ ଡିସ୍କ ର ଆରମ୍ଭରେ ଅତି କମରେ ୫ ମେଗା-ବାଇଟ ଖାଲିସ୍ଥାନ " "ଅଛି ଯାହାକି /boot ଧାରଣ କରିଛି।" #: ../autopart.py:1066 #, python-format msgid "" "Boot partition %s isn't a VFAT partition. EFI won't be able to boot from " "this partition." msgstr "%s ବୁଟ୍ ବିଭାଜନଟି ଗୋଟିଏ VFAT ବିଭାଜନ ନୁହେଁ। ଏହି ବିଭାଜନରୁ EFI ବୁଟ କରିପାରିବ ନାହିଁ।" #: ../autopart.py:1068 msgid "" "The boot partition must entirely be in the first 4GB of the disk. " "OpenFirmware won't be able to boot this installation." msgstr "" "ବୁଟ ବିଭାଜନ ସମ୍ପୂର୍ଣ୍ଣ ରୂପେ ଡିସ୍କର ପ୍ରଥମ ୪ ଗିଗା-ବାଇଟରେ ଥିବା ଉଚିତ। OpenFirmware ଏହି ସ୍ଥାପନକୁ " "ବୁଟ କରି ପାରିବ ନାହିଁ।" #: ../autopart.py:1070 #, python-format msgid "" "Boot partition %s is not a Linux filesystem, such as ext3. The system won't " "be able to boot from this partition." msgstr "" "%s ବୁଟ୍ ବିଭାଜନଟି ଗୋଟିଏ Linux ଫାଇଲତନ୍ତ୍ର ନୁହେଁ, ଯେପରିକି ext3. ତନ୍ତ୍ର ଏହି ବିଭାଜନରୁ ବୁଟ କରିପାରିବ " "ନାହିଁ." #: ../autopart.py:1073 #, python-format msgid "Boot partition %s may not meet booting constraints for your architecture." msgstr "%s ବୁଟ୍ ବିଭାଜନଟି ଆପଣଙ୍କର ସ୍ଥାପତ୍ଯ ପାଇଁ ବୁଟିଙ୍ଗର ସ୍ଥିର ମୂଲ୍ୟ ପାଇ ନ ପାରେ।" #: ../autopart.py:1098 #, python-format msgid "" "Adding this partition would not leave enough disk space for already " "allocated logical volumes in %s." msgstr "" "ଏହି ବିଭାଜନକୁ ସଂଯୋଗ କଲେ ଏହା %s ରେ ପୂର୍ବରୁ ବଣ୍ଟାଯାଇଥିବା ତାର୍କିକ ଘନଫଳ ପାଇଁ ଯଥେଷ୍ଟ ଡିସ୍କ୍ ସ୍ଥାନ " "ଛାଡିବ ନାହିଁ।" #: ../autopart.py:1295 msgid "Requested Partition Does Not Exist" msgstr "ଆପଣ ଅନୁରୋଧ କରିଥିବା ବିଭାଜନଟି ଉପଲବ୍ଧ ନାହିଁ" #: ../autopart.py:1296 #, python-format msgid "" "Unable to locate partition %s to use for %s.\n" "\n" "Press 'OK' to exit the installer." msgstr "" "%s ବିଭାଜନକୁ %s ର ବ୍ଯବହାର ପାଇଁ ଖୋଜିବାରେ ଅସମର୍ଥ।\n" "\n" "ସ୍ଥାପକକୁ ବନ୍ଦ କରିବା ପାଇଁ 'ଠିକ ଅଛି' ବଟନକୁ ଦବାନ୍ତୁ।" #: ../autopart.py:1321 msgid "Requested Raid Device Does Not Exist" msgstr "ଆପଣ ଅନୁରୋଧ କରିଥିବା ରେଡ୍ ଉପକରଣଟି ଉପଲବ୍ଧ ନାହିଁ" #: ../autopart.py:1322 #, python-format msgid "" "Unable to locate raid device %s to use for %s.\n" "\n" "Press 'OK' to exit the installer." msgstr "" "%s ରେଡ୍ ଉପକରଣକୁ %s ର ବ୍ଯବହାର ପାଇଁ ଖୋଜିବାରେ ଅସମର୍ଥ।\n" "\n" "ସ୍ଥାପକକୁ ବନ୍ଦ କରିବା ପାଇଁ 'ଠିକ ଅଛି' ବଟନକୁ ଦବାନ୍ତୁ।" #: ../autopart.py:1351 msgid "Requested Volume Group Does Not Exist" msgstr "ଆପଣ ଅନୁରୋଧ କରିଥିବା ଘନଫଳ ସମୂହ ଟି ଉପଲବ୍ଧ ନାହିଁ" #: ../autopart.py:1352 #, python-format msgid "" "Unable to locate volume group %s to use for %s.\n" "\n" "Press 'OK' to exit the installer." msgstr "" "ଘନଫଳ ସମୂହ %s କୁ %s ର ବ୍ଯବହାର ପାଇଁ ଖୋଜିବାରେ ଅସମର୍ଥ \n" "\n" "ସ୍ଥାପକକୁ ବନ୍ଦ କରିବା ପାଇଁ 'ଠିକ ଅଛି' ବଟନକୁ ଦବାନ୍ତୁ।" #: ../autopart.py:1389 msgid "Requested Logical Volume Does Not Exist" msgstr "ଆପଣ ଅନୁରୋଧ କରିଥିବା ତାର୍କିକ ଘନଫଳଟି ଉପଲବ୍ଧ ନାହିଁ" #: ../autopart.py:1390 #, python-format msgid "" "Unable to locate logical volume %s to use for %s.\n" "\n" "Press 'OK' to exit the installer." msgstr "" "%s ତାର୍କିକ ଘନଫଳକୁ %s ର ବ୍ଯବହାର ପାଇଁ ଖୋଜିବାରେ ଅସମର୍ଥ।\n" "\n" "ସ୍ଥାପକକୁ ବନ୍ଦ କରିବା ପାଇଁ 'ଠିକ ଅଛି' ବଟନକୁ ଦବାନ୍ତୁ।" #: ../autopart.py:1524 ../autopart.py:1571 msgid "Automatic Partitioning Errors" msgstr "ସ୍ବୟଂଚାଳିତ ବିଭାଜନୀୟ ତୃଟି" #: ../autopart.py:1525 #, python-format msgid "" "The following errors occurred with your partitioning:\n" "\n" "%s\n" "\n" "Press 'OK' to exit the installer." msgstr "" "ଆପଣଙ୍କ ବିଭାଜନରେ ନିମ୍ନଲିଖିତ ତୃଟି ଗୁଡିକ ଘଟିଲା:\n" "\n" "%s\n" "\n" "ସ୍ଥାପକକୁ ବନ୍ଦ କରିବା ପାଇଁ 'ଠିକ ଅଛି' ବଟନକୁ ଦବାନ୍ତୁ।" #: ../autopart.py:1535 msgid "Warnings During Automatic Partitioning" msgstr "ସ୍ବୟଂଚାଳିତ ବିଭାଜନ ସମୟରେ ଚେତାବନୀ" #: ../autopart.py:1536 #, python-format msgid "" "Following warnings occurred during automatic partitioning:\n" "\n" "%s" msgstr "" "ସ୍ବୟଂଚାଳିତ ବିଭାଜନ ସମୟରେ ନିମ୍ନଲିଖିତ ତୃଟି ମାନ ଉତ୍ପନ ହେଲା:\n" "\n" "%s" #: ../autopart.py:1550 ../autopart.py:1567 msgid "" "\n" "\n" "Press 'OK' to exit the installer." msgstr "" "\n" "\n" "ସ୍ଥାପକକୁ ବନ୍ଦ କରିବା ପାଇଁ 'ଠିକ ଅଛି' ବଟନକୁ ଦବାନ୍ତୁ।" #: ../autopart.py:1551 ../iw/partition_gui.py:1027 #: ../textw/partition_text.py:247 msgid "Error Partitioning" msgstr "ବିଭାଜନ ସମୟରେ ତୃଟି" #: ../autopart.py:1552 #, python-format msgid "" "Could not allocate requested partitions: \n" "\n" "%s.%s" msgstr "" "ଆପଣ ଅନୁରୋଧ କରିଥିବା ବିଭାଜନକୁ ବାଣ୍ଟିପାରିଲା ନାହିଁ: \n" "\n" "%s.%s" #: ../autopart.py:1569 msgid "" "\n" "\n" "Press 'OK' to choose a different partitioning option." msgstr "" "\n" "\n" "ଗୋଟିଏ ଭିନ୍ନ ବିଭାଜନ ବିକଳ୍ପକୁ ଚୟନ କରିବା ପାଇଁ 'ଠିକ ଅଛି' ବଟନକୁ ଦବାନ୍ତୁ।" #: ../autopart.py:1572 #, python-format msgid "" "The following errors occurred with your partitioning:\n" "\n" "%s\n" "\n" "This can happen if there is not enough space on your hard drive(s) for the " "installation. %s" msgstr "" "ଆପଣଙ୍କର ବିଭାଜନ ସମୟରେ ନିମ୍ନଲିଖିତ ତୃଟି ଗୁଡିକ ଘଟିଲା:\n" "\n" "%s\n" "\n" "ଏହା ସମ୍ଭବପର ଯଦି ଆପଣଙ୍କ ହାର୍ଡ ଡ୍ରାଇଭ(ରେ/ମାନଙ୍କରେ) ସ୍ଥାପନ ପାଇଁ ଯଥେଷ୍ଟ ସ୍ଥାନ ନାହିଁ। %s" #: ../autopart.py:1583 msgid "Unrecoverable Error" msgstr "ଅପ୍ରାପ୍ଯ ତୃଟି" #: ../autopart.py:1584 msgid "Your system will now be rebooted." msgstr "ବର୍ତମାନ ଆପଣଙ୍କ ତନ୍ତ୍ରଟି ପୁନର୍ଚାଳିତ ହେବ।" #: ../autopart.py:1707 msgid "" "Automatic Partitioning sets partitions based on the selected installation " "type. You also can customize the partitions once they have been created.\n" "\n" "The manual disk partitioning tool, Disk Druid, allows you to create " "partitions in an interactive environment. You can set the file system types, " "mount points, partition sizes, and more." msgstr "" "ସ୍ବତଃ ବିଭାଜନ ଚୟିତ ସ୍ଥାପନ ପ୍ରକାର ଉପରେ ଆଧାରିତ ବିଭାଜନ ମାନଙ୍କୁ ବ୍ଯବସ୍ଥାପିତ କରିଥାଏ। ଥରେ ନିର୍ମିତ " "ହୋଇଗଲେ ଆପଣ ମଧ୍ଯ ବିଭାଦନ ମାନଙ୍କୁ ଇଚ୍ଛାରୂପଣ କରିପାରିବେ।\n" "\n" "ମେନ୍ଯୁଆଲ ଡିସ୍କ ବିଭାଜନୀୟ ଉପକରଣ, ଡିସ୍କ ଡୃଇଡ, ଆପଣଙ୍କୁ ପାରସ୍ପରିକ କ୍ରିୟାତ୍ମକ ବିଭାଜନ ସୃଷ୍ଟି କରିବା ପାଇଁ " "ଅନୁମତି ପ୍ରଦାନ କରିଥାଏ। ଆପଣ ଫାଇଲ ତନ୍ତ୍ରର ପ୍ରକାର, ମାଉଣ୍ଟ ବିନ୍ଦୁ, ବିଭାଜନ ଆକାର, ଏବଂ ଆହୁରି ଅଧିକ " "ସାଧନ ମାନଙ୍କୁ ସେଟ କରିପାରିବେ।" #: ../autopart.py:1718 msgid "" "Before automatic partitioning can be set up by the installation program, you " "must choose how to use the space on your hard drives." msgstr "" "ସ୍ଥାପନ କାର୍ଯ୍ଯକ୍ରମ ଦ୍ବାରା ସ୍ବତଃ ବିଭାଜନ ବ୍ଯବସ୍ଥାପିତ ହେବା ପୂର୍ବରୁ, ଆପଣଙ୍କ ହାର୍ଡ-ଡ୍ରାଇଭରେ " "ଥିବାସ୍ଥାନକୁ ବ୍ଯବହାର କରିବାର ଉପାୟକୁ ଆପଣ ଚୟନ କରିବା ଉଚିତ।" #: ../autopart.py:1723 msgid "Remove all partitions on this system" msgstr "ଏହି ତନ୍ତ୍ରରୁ ସମସ୍ତ ବିଭାଜନକୁ ଅପସାରିତ କରନ୍ତୁ" #: ../autopart.py:1724 msgid "Remove all Linux partitions on this system" msgstr "ଏହି ତନ୍ତ୍ରରୁ ସମସ୍ତ Linux ବିଭାଜନକୁ ଅପସାରିତ କରନ୍ତୁ" #: ../autopart.py:1725 msgid "Keep all partitions and use existing free space" msgstr "ସମସ୍ତ ବିଭାଜନକୁ ରଖନ୍ତୁ ଏବଂ ଉପସ୍ଥିତ ଖାଲି ସ୍ଥାନକୁ ବ୍ଯବହାର କରନ୍ତୁ" #: ../backend.py:130 #, python-format msgid "Upgrading %s\n" msgstr "%s ର ଉନ୍ନୟନ କରୁଅଛି\n" #: ../backend.py:132 #, python-format msgid "Installing %s\n" msgstr "%s କୁ ସ୍ଥାପନ କରୁଅଛି\n" #: ../backend.py:151 msgid "Copying File" msgstr "ଫାଇଲର ନକଲ କରୁଅଛି" #: ../backend.py:152 msgid "Transferring install image to hard drive..." msgstr "ସ୍ଥାପନ ପ୍ରତିଛିବିକୁ ହାର୍ଡ ଡ୍ରାଇଭକୁ ସ୍ଥାନାନ୍ତରିତ କରୁଅଛି..." #: ../backend.py:162 msgid "" "An error occurred transferring the install image to your hard drive. This " "is probably due to bad media." msgstr "" "ହାର୍ଡ ଡ୍ରାଇଭକୁ ସ୍ଥାପନ ପ୍ରତିଛବି ସ୍ଥାନାନ୍ତରିତ କରିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରଲକ୍ଷିତ ହେଲା. ବୋଧହୁଏ ଏହା " "ଖରାପ ସଞ୍ଚାର ମାଧ୍ଯମ ଯୋଗୁଁ ହୋଇଛି." #: ../backend.py:166 msgid "" "An error occurred transferring the install image to your hard drive. You are " "probably out of disk space." msgstr "" "ସ୍ଥାପନ ପ୍ରତିଛବିକୁ ସ୍ଥାନାନ୍ତରିତ କରିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିିଲିଖିତ ହେଲା। ବୋଧହୁଏ ଆପଣଙ୍କ ନିକଟରେ " "ଯଥେଷ୍ଟ ଡିସ୍କ ସ୍ଥାନ ନାହିଁ।" #: ../backend.py:170 ../fsset.py:670 ../fsset.py:1683 ../fsset.py:1714 #: ../fsset.py:1790 ../fsset.py:1858 ../fsset.py:1908 ../fsset.py:1997 #: ../fsset.py:2010 ../image.py:291 ../livecd.py:196 ../livecd.py:377 #: ../partIntfHelpers.py:413 ../text.py:470 ../text.py:474 #: ../yuminstall.py:366 ../yuminstall.py:642 ../yuminstall.py:754 #: ../yuminstall.py:991 ../yuminstall.py:1059 ../yuminstall.py:1288 #: ../yuminstall.py:1311 ../iw/autopart_type.py:96 ../iw/autopart_type.py:174 #: ../iw/autopart_type.py:349 ../iw/netconfig_dialog.py:283 #: ../iw/osbootwidget.py:215 ../iw/osbootwidget.py:224 #: ../iw/raid_dialog_gui.py:655 ../iw/raid_dialog_gui.py:694 #: ../iw/task_gui.py:47 ../iw/task_gui.py:145 ../iw/task_gui.py:274 #: ../iw/task_gui.py:396 ../textw/grpselect_text.py:100 #: ../textw/partition_text.py:1652 ../textw/partition_text.py:1658 #: ../textw/partition_text.py:1680 ../textw/upgrade_text.py:174 #: ../textw/upgrade_text.py:181 ../loader/cdinstall.c:219 #: ../loader/cdinstall.c:503 ../loader/driverdisk.c:100 #: ../loader/driverdisk.c:307 ../loader/driverdisk.c:342 #: ../loader/driverdisk.c:373 ../loader/driverdisk.c:381 #: ../loader/driverdisk.c:445 ../loader/hdinstall.c:143 #: ../loader/hdinstall.c:352 ../loader/hdinstall.c:454 #: ../loader/hdinstall.c:497 ../loader/hdinstall.c:510 #: ../loader/kickstart.c:284 ../loader/lang.c:115 ../loader/loader.c:399 #: ../loader/loader.c:509 ../loader/loader.c:1182 ../loader/mediacheck.c:62 #: ../loader/mediacheck.c:101 ../loader/mediacheck.c:108 #: ../loader/method.c:280 ../loader/method.c:354 ../loader/nfsinstall.c:244 #: ../loader/nfsinstall.c:263 ../loader/telnetd.c:92 ../loader/urlinstall.c:83 #: ../loader/urlinstall.c:107 ../loader/urlinstall.c:175 ../loader/urls.c:328 #: ../loader/urls.c:334 msgid "Error" msgstr "ତୃଟି" #: ../bootloader.py:44 ../bootloader.py:230 ../image.py:82 #: ../partedUtils.py:367 ../partedUtils.py:397 ../partedUtils.py:1110 #: ../partedUtils.py:1258 ../upgrade.py:418 ../yuminstall.py:1493 #: ../yuminstall.py:1520 ../iw/autopart_type.py:184 ../iw/blpasswidget.py:151 #: ../iw/upgrade_swap_gui.py:194 ../iw/upgrade_swap_gui.py:202 #: ../iw/upgrade_swap_gui.py:209 ../textw/bootloader_text.py:127 #: ../textw/bootloader_text.py:452 ../textw/partition_text.py:251 #: ../textw/upgrade_text.py:186 msgid "Warning" msgstr "ଚେତାବନୀ" #: ../bootloader.py:45 msgid "" "Your filesystems have already been activated. You cannot go back past this " "point.\n" "\n" "Would you like to continue with the installation?" msgstr "" "ଆପଣଙ୍କର ଫାଇଲତନ୍ତ୍ରଗୁଡିକ ବିକଳ୍ପକୁ ପୂର୍ବୁ ସକ୍ରିୟଣ କ ରାଯାଏଠାରୁ ଦନ କରି ଏହି ଡିସ୍କକୁ ପ୍ରତ୍ଯାବର୍ତ୍ତନ କରି " "ପାରିବେନାହିଁ। \n" "\n" "ଆପଣ ଏହି ସ୍ଥାପନ ପ୍ରକ୍ରିୟାକୁ ଜାରି ରଖିବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି?" #: ../bootloader.py:49 ../exception.py:439 ../exception.py:456 #: ../exception.py:479 ../exception.py:494 ../exception.py:519 #: ../fsset.py:1713 ../fsset.py:1977 ../fsset.py:2730 ../gui.py:1285 #: ../gui.py:1419 ../gui.py:1496 ../image.py:91 ../instdata.py:122 #: ../livecd.py:203 ../livecd.py:384 ../packages.py:119 ../upgrade.py:99 #: ../upgrade.py:119 ../yuminstall.py:758 ../yuminstall.py:841 #: ../yuminstall.py:847 ../yuminstall.py:987 ../yuminstall.py:1047 #: ../yuminstall.py:1283 ../yuminstall.py:1318 msgid "_Exit installer" msgstr "ସ୍ଥାପକକୁ ବନ୍ଦ କରନ୍ତୁ (_E)" #: ../bootloader.py:49 ../fsset.py:1978 ../image.py:92 ../image.py:253 #: ../kickstart.py:1113 ../kickstart.py:1151 ../partedUtils.py:1261 #: ../upgrade.py:99 ../upgrade.py:119 ../yuminstall.py:1052 #: ../iw/partition_gui.py:1041 msgid "_Continue" msgstr "ଆଗକୁ ବଢନ୍ତୁ (_C)" #: ../bootloader.py:163 msgid "Bootloader" msgstr "ବୁଟ-ଲୋଡର" #: ../bootloader.py:163 msgid "Installing bootloader..." msgstr "ବୁଟ-ଲୋଡରକୁ ସ୍ଥାପନ କରୁଅଛି" #: ../bootloader.py:231 msgid "" "No kernel packages were installed on your system. Your boot loader " "configuration will not be changed." msgstr "" "ଆପଣଙ୍କ ତନ୍ତ୍ରରେ କୌଣସି କର୍ଣ୍ଣଲ ପ୍ଯାକେଜ ମାନ ସ୍ଥାପିତ ହୋଇନାହିଁ। ଆପଣଙ୍କ ବୁଟ-ଲୋଡର ର ବିନ୍ଯାସକୁ " "ପରିବର୍ତ୍ତନ କରି ହେବନାହିଁ।" #: ../cmdline.py:54 msgid "Completed" msgstr "ସମାପ୍ତ" #: ../cmdline.py:62 msgid "In progress... " msgstr "ପ୍ରଗତି ପଥେ..." #: ../cmdline.py:97 msgid "an't have a question in command line mode!" msgstr "ପାଠ୍ଯ ନିର୍ଦ୍ଦେଶ ଧାରାରେ କୌଣସି ପ୍ରଶ୍ନ ରହି ପାରିବ ନାହିଁ!" #: ../cmdline.py:116 msgid "Parted exceptions can't be handled in command line mode!" msgstr "ପାଠ୍ଯ ନିର୍ଦ୍ଦେଶ ଧାରାରେ ବିଭାଜିତ ବ୍ଯତିକ୍ରମ ମାନଙ୍କୁ ନିୟନ୍ତ୍ରଣ କରାଯାଇ ପାରିବ ନାହିଁ!" #: ../constants.py:74 msgid "" "An unhandled exception has occurred. This is most likely a bug. Please " "save a copy of the detailed exception and file a bug report" msgstr "" "ଗୋଟିଏ ଅନିୟନ୍ତ୍ରିତ ଅପବାଦ ଘଟିଲା। ଏହା ସମ୍ଭବତଃ ଗୋଟିଏ ତୃଟି ଅଟେ। ଦୟାକରି ବିସ୍ତୃତ ବ୍ଯତିକ୍ରମର ଗୋଟିଏ " "ନକଲକୁ ସଂରକ୍ଷଣ କରନ୍ତୁ ଏବଂ ଗୋଟିଏ ତୃଟି ବିବରଣୀ ଦାଖଲ କରନ୍ତୁ।" #: ../constants.py:80 msgid " with the provider of this software." msgstr " ଏହି ସଫ୍ଟୱେରର ଦାତା ସହିତ।" #: ../constants.py:84 #, python-format msgid " against anaconda at %s" msgstr "%s ଠାରେ ଆନାକୋଣ୍ଡା ବିପକ୍ଷରେ" #: ../exception.py:364 #, python-format msgid "" "Your bug could not be filed due to the following error when communicating " "with bugzilla:\n" "\n" "%s" msgstr "" "ବଗଜିଲା ସହିତ ଯୋଗାଯୋଗ କରିବା ସମୟରେ ନିମ୍ନଲିଖିତ କାରଣ ହେତୁ ଆପଣଙ୍କର ତ୍ରୁଟି ପୁରଣ ହୋଇପାରିଲା ନାହିଁ:\n" "\n" "%s" #: ../exception.py:367 #, python-format msgid "" "Your bug could not be filed due to bad information in the bug fields. This " "is most likely an error in anaconda:\n" "\n" "%s" msgstr "" "ତ୍ରୁଟି କ୍ଷେତ୍ରରେ ଖରାପ ସୂଚନା ହେତୁ ଆପଣଙ୍କର ତ୍ରୁଟି ପୁରଣ ହୋଇପାରିଲା ନାହିଁ. ଏହା ସମ୍ଭବତଃ " "ଆନାକୋଣ୍ଡାରେ ଥିବା ଏକ ତ୍ରୁଟି:\n" "\n" "%s" #: ../exception.py:371 msgid "Unable To File Bug" msgstr "ତ୍ରୁଟି ଦାଖଲ କରିବାରେ ଅସମର୍ଥ" #: ../exception.py:377 msgid "Bug Filing Not Supported" msgstr "ତ୍ରୁଟି ଭରଣ ସହାୟକ ନୁହେଁ" #: ../exception.py:378 msgid "" "Your distribution does not provide a supported bug filing system, so you " "cannot save your exception this way." msgstr "" "ଆପଣଙ୍କର ବଣ୍ଟନ ସମର୍ଥିତ ତ୍ରୁଟି ପୁରଣ ତନ୍ତ୍ର ପ୍ରଦାନ କରିନଥାଏ, ତେଣୁ ଆପଣ ଆପଣଙ୍କର ବ୍ୟତିକ୍ରମକୁ ଏହି " "ଉପାୟରେ ସଂରକ୍ଷଣ କରିପାରିବେ ନାହିଁ." #: ../exception.py:384 msgid "Invalid Bug Information" msgstr "ଅବୈଧ ତ୍ରୁଟି ସୂଚନା" #: ../exception.py:385 msgid "Please provide a valid username, password, and short bug description." msgstr "ଦୟାକରି ଗୋଟିଏ ବୈଧ ଚାଳକ ନାମ, ପ୍ରବେଶ ସଂକେତ, ଏବଂ ସଂକ୍ଷିପ୍ତ ତ୍ରୁଟି ବର୍ଣ୍ଣନା ପ୍ରଦାନ କରନ୍ତୁ. " #: ../exception.py:395 msgid "Unable To Login" msgstr "ଲଗଇନ କରିବାରେ ଅସମର୍ଥ" #: ../exception.py:396 #, python-format msgid "There was an error logging into %s using the provided username and password." msgstr "ପ୍ରଦତ୍ତ ଚାଳକ ନାମ ଏବଂ ପ୍ରବେଶ ସଂକେତ ବ୍ୟବହାର କରି %sରେ ଲଗଇନ କରିବା ସମୟରେ ତ୍ରୁଟି ଘଟିଲା." #: ../exception.py:433 msgid "Bug Created" msgstr "ତ୍ରୁଟି ନିର୍ମିତ ହୋଇଛି" #: ../exception.py:434 #, python-format msgid "" "A new bug has been created with your traceback attached. Please add " "additional information such as what you were doing when you encountered the " "bug, screenshots, and whatever else is appropriate to the following bug:\n" "\n" "%s/%s" msgstr "" "ଆପଣଙ୍କର ସଂଲଗ୍ନ ପଛଖୋଜା ସହିତ ଗୋଟିଏ ନୂତନ ତ୍ରୁଟି ସୃଷ୍ଟି ହୋଇଛି. ଦୟାକରି ଅତିରିକ୍ତ ସୂଚନା ଯୋଗକରନ୍ତୁ " "ଯେପରିକି ସେହି ତ୍ରୁଟିର ସମ୍ମୁଖିନ ହେଲା ପରେ ଆପଣ କଣ କରୁଛନ୍ତି, ସ୍କ୍ରିନସଟ, ଏବଂ ନିମ୍ନଲିଖିତ ତ୍ରୁଟି ପାଇଁ " "ଯାହାକିଛି ଉଚିତ:\n" "\n" "%s/%s" #: ../exception.py:450 msgid "Bug Updated" msgstr "ତ୍ରୁଟି ଅଦ୍ଯତିତ ହୋଇଛି" #: ../exception.py:451 #, python-format msgid "" "A bug with your information already exists. Your account has been added to " "the CC list and your traceback added as a comment. Please add additional " "descriptive information to the following bug:\n" "\n" "%s/%s" msgstr "" "ଆପଣଙ୍କର ସୂଚନା ସହିତ ପୂରବରୁ ଗୋଟିଏ ତ୍ରୁଟି ଅବସ୍ଥିତ ଅଛି. ଆପଣଙ୍କର ଖାତାକୁ CC ତାଲିକାରେ ଯୋଗ " "କରିଦିଆଯାଇଛି ଏବଂ ଆପଣଙ୍କର ପଛଖୋଜାକୁ ଟୀପ୍ପଣୀ ଆକାରରେ ଯୋଗକରାଯାଇଛି. ଦୟାକରି ନିମ୍ନଲିଖିତ ତ୍ରୁଟି ପାଇଁ " "ଅତିରିକ୍ତ ବର୍ଣ୍ଣନାତ୍ମକ ସୂଚନା ଯୋଗକରନ୍ତୁ:\n" "\n" "%s/%s" #: ../exception.py:475 ../exception.py:490 ../exception.py:515 msgid "Dump Written" msgstr "ଅଦରକାରୀ ଜିନିଷ ଲେଖା ଯାଇଛି" #: ../exception.py:476 ../exception.py:491 msgid "" "Your system's state has been successfully written to the disk. The installer " "will now exit." msgstr "ଆପଣଙ୍କ ତନ୍ତ୍ରର ସ୍ଥିତିକୁ ସଫଳତାର ସହିତ ଡିସ୍କରେ ଲେଖାଯାଇଛି। ବର୍ତ୍ତମାନ ସ୍ଥାପକଟି ବିଦାୟ ନେବ." #: ../exception.py:482 ../exception.py:499 ../exception.py:522 msgid "Dump Not Written" msgstr "ଅଦରକାରୀ ଜିନିଷ ଲେଖା ଯାଇନାହିଁ" #: ../exception.py:483 ../exception.py:500 msgid "There was a problem writing the system state to the disk." msgstr "ଡିସ୍କରେ ତନ୍ତ୍ରର ସ୍ଥିତି ଲେଖିବା ସମୟରେ ଗୋଟିଏ ସମସ୍ଯା ଦେଖାଗଲା।" #: ../exception.py:506 ../exception.py:529 ../rescue.py:196 msgid "No Network Available" msgstr "କୌଣସି ନେଟୱାର୍କ ଉପକରଣ ଉପଲବ୍ଧ ନାହିଁ" #: ../exception.py:507 ../exception.py:530 msgid "" "Cannot save a bug report since there is no active networking device " "available." msgstr "ତ୍ରୁଟି ବିବରଣୀକୁ ସଂରକ୍ଷଣ କରାଯାଇପାରିବ ନାହିଁ ଯେହେତୁ କୌଣସି ସକ୍ରିୟ ନେଟୱର୍କିଙ୍ଗ ଉପକରଣ ଉପଲବ୍ଧ ନାହିଁ." #: ../exception.py:516 msgid "" "Your system's state has been successfully written to the remote host. The " "installer will now exit." msgstr "ଦୂର ଆଧାରରେ ଆପଣଙ୍କ ତନ୍ତ୍ରର ସ୍ଥିତିକୁ ସଫଳତାର ସହିତ ଲେଖାଗଲା। ବର୍ତମାନ ସ୍ଥାପକଟି ବନ୍ଦ ହୋଇଯିବ।" #: ../exception.py:523 msgid "There was a problem writing the system state to the remote host." msgstr "ଦୂର ଆଧାରରେ ଆପଣଙ୍କ ତନ୍ତ୍ରର ସ୍ଥିତିକୁ ଲେଖିବା ସମୟରେ ଗୋଟିଏ ସମସ୍ଯା ଦେଖାଗଲା।" #: ../fsset.py:514 msgid "Checking" msgstr "ଯାଞ୍ଚ କରୁଅଛି" #: ../fsset.py:515 #, python-format msgid "Checking filesystem on %s..." msgstr "%s ରେ ଫାଇଲତନ୍ତ୍ରକୁ ପାଇଁ ଯାଞ୍ଚ କରୁଅଛି..." #: ../fsset.py:526 ../fsset.py:984 msgid "Resizing" msgstr "ଆକାର ବଦଳାଉଅଛି" #: ../fsset.py:527 ../fsset.py:985 #, python-format msgid "Resizing filesystem on %s..." msgstr "%s ରେ ଫାଇଲ ତନ୍ତ୍ରର ଆକାର ବଦଳାଉଅଛିରୁଅଛି..." #: ../fsset.py:671 #, python-format msgid "" "An error occurred migrating %s to ext3. It is possible to continue without " "migrating this file system if desired.\n" "\n" "Would you like to continue without migrating %s?" msgstr "" "%sକୁ ext3ରେ ଉତ୍ପ୍ରବାସନ କରିବା ସମୟରେ ତୃଟି। ଅଭିଳାଷା ମୁତାବକ ଉତ୍ପ୍ରବାସନ ବିନାଏହି ଫାଇଲ ତନ୍ତ୍ରକୁ " "ଜାରି ରଖିବା ସମ୍ଭାବ୍ଯ।\n" "\n" "ଆପଣ %sକୁ ଉତ୍ପ୍ରବାସିତ ନକରି ଆଗକୁ ବଢିବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି?" #: ../fsset.py:1530 msgid "EFI System Partition" msgstr "EFI ତନ୍ତ୍ର ବିଭାଜନ" #: ../fsset.py:1534 msgid "RAID Device" msgstr "RAID ଉପକରଣ" #: ../fsset.py:1538 ../fsset.py:1544 msgid "Apple Bootstrap" msgstr "Apple ବୁଟ-ଷ୍ଟ୍ରାପ" #: ../fsset.py:1549 ../partitions.py:1288 msgid "PPC PReP Boot" msgstr "PPC PReP ବୁଟ" #: ../fsset.py:1552 msgid "First sector of boot partition" msgstr "ବୁଟ ବିଭାଜନର ପ୍ରଥମ ଖଣ୍ଡ" #: ../fsset.py:1553 msgid "Master Boot Record (MBR)" msgstr "ପ୍ରଧାନ ବୁଟ ଅନୁଲିପି (MBR)" #: ../fsset.py:1684 #, python-format msgid "" "An error occurred trying to initialize swap on device %s. This problem is " "serious, and the install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "%s ଉପକରଣରେ swap କୁ ପ୍ରାରମ୍ଭିକୃତ କରିବାର ପ୍ରଚେଷ୍ଟା କରୁଥିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ଘଟିଲା। ଏହି ସମସ୍ଯାଟି " "ଗମ୍ଭୀର ଅଟେ, ଏବଂ ସ୍ଥାପନ ପ୍ରକ୍ରିୟା ଆଗକୁ ବଢିପାରିବ ନାହିଁ।\n" "ସ୍ଥାପକକୁ ବନ୍ଦ କରିବା ପାଇଁ ବଟନକୁ ଦବାନ୍ତୁ।" #: ../fsset.py:1713 ../packages.py:353 ../rescue.py:242 ../rescue.py:244 #: ../textw/upgrade_text.py:132 ../loader/cdinstall.c:239 #: ../loader/cdinstall.c:242 ../loader/method.c:327 msgid "Skip" msgstr "ଛାଡି ଦିଅନ୍ତୁ" #: ../fsset.py:1734 #, python-format msgid "" "The swap device:\n" "\n" " /dev/%s\n" "\n" "is a version 0 Linux swap partition. If you want to use this device, you " "must reformat as a version 1 Linux swap partition. If you skip it, the " "installer will ignore it during the installation." msgstr "" "swap ଉପକରଣ:\n" "\n" " /dev/%s\n" "\n" "0 Linux swap ବିଭାଜନର ଗୋଟିଏ ସଂସ୍କରଣ ଅଟେ। ଯଦି ଆପଣ ଏହି ଉପକରଣକୁ ବ୍ଯବହାର କରିବା ପାଇଁ " "ଚାହୁଁଛନ୍ତି, ଆପଣ ଏହାକୁ 1 Linux swap ବିଭାଜନ ଭାବରେ ପୁନଃ ଫର୍ମାଟ କରିବା ଉଚିତ। ଆପଣ ଯଦି ଏହାକୁ " "ଏଡାଇ ଦେବେ, ସ୍ଥାପକ ଏହାକୁ ସ୍ଥାପନ ସମୟରେ ଆଗ୍ରହ୍ଯ କରିବେବ।" #: ../fsset.py:1741 msgid "Reformat" msgstr "ପୁନଃଫର୍ମାଟ କରନ୍ତୁ" #: ../fsset.py:1745 #, python-format msgid "" "The swap device:\n" "\n" " /dev/%s\n" "\n" "in your /etc/fstab file is currently in use as a software suspend partition, " "which means your system is hibernating. To perform an upgrade, please shut " "down your system rather than hibernating it." msgstr "" "swap ଉପକରଣ:\n" "\n" " /dev/%s\n" "\n" "ଆପଣଙ୍କର /etc/fstab ଫାଇଲଟି ବର୍ତମାନ ଗୋଟିଏ ସଫଟୱେର ସ୍ଥଗିତ ବିଭାଜନ ଭାବରେ ବ୍ଯବହୃତ ହେଉଛି, " "ଯାହାର ଅର୍ଥ ଆପଣଙ୍କର ତନ୍ତ୍ରଟି ସୁପ୍ତାବସ୍ଥାରେ ଅଛି। ଗୋଟିଏ ଉନ୍ନୟନ ପ୍ରକ୍ରିୟା ସମ୍ପାଦନ କରିବା ପାଇଁ, " "ଦୟାକରି ଆପଣଙ୍କ ତନ୍ତ୍ରକୁ ନିଭ୍ରୁତ କରିବା ପରିବର୍ତ୍ତେ ତାହାକୁ ବନ୍ଦ କରନ୍ତୁ।" #: ../fsset.py:1753 #, python-format msgid "" "The swap device:\n" "\n" " /dev/%s\n" "\n" "in your /etc/fstab file is currently in use as a software suspend partition, " "which means your system is hibernating. If you are performing a new install, " "make sure the installer is set to format all swap partitions." msgstr "" "swap ଉପକରଣ:\n" "\n" " /dev/%s\n" "\n" "ଆପଣଙ୍କ /etc/fstab ଫାଇଲଟି ବର୍ତମାନ ଗୋଟିଏ ସଫଟୱେର ସ୍ଥଗିତ ବିଭାଜନ ଭାବରେ ବ୍ଯବହୃତ ହେଉଛି, ଯାହାର " "ଅର୍ଥ ଆପଣଙ୍କର ତନ୍ତ୍ରଟି ସୁପ୍ତାବସ୍ଥାରେ ଅଛି। ଯଦି ଆପଣ ଗୋଟିଏ ନୂତନ ସ୍ଥାପନ କରୁଛନ୍ତି, ଏହା ନିଶ୍ଚିତ ହୁଅନ୍ତୁ " "ଯେ ସ୍ଥାପକକୁ ସମସ୍ତ swap ବିଭାଜନ ମାନଙ୍କୁ ଫର୍ମାଟ କରିବା ପାଇଁ ବିନ୍ଯାସ କରାଯାଇଛି।" #: ../fsset.py:1763 msgid "" "\n" "\n" "Choose Skip if you want the installer to ignore this partition during the " "upgrade. Choose Format to reformat the partition as swap space." msgstr "" "\n" "\n" "ଉନ୍ନୟନ ସମୟରେ ସ୍ଥାପକ ଏହି ବିଭାଜନକୁ ଆଗ୍ରହ୍ଯ କରୁ ବୋଲି ଆପଣ ଚାହୁଁଥିଲେ 'ଏଡାଇ ଦିଅନ୍ତୁ' ବିକଳ୍ପକୁ ଚୟନ " "କରନ୍ତୁ। swap ସ୍ଥାନ ଭାବରେ ବିଭାଜନ ପୁନର୍ବାର ଫର୍ମାଟ କରିବା ପାଇଁ 'ଫର୍ମାଟ କରନ୍ତୁ' ବିକଳ୍ପକୁ ଚୟନ " "କରନ୍ତୁ।" #: ../fsset.py:1768 ../iw/partition_gui.py:375 msgid "Format" msgstr "ଫର୍ମାଟ କରନ୍ତୁ" #: ../fsset.py:1774 #, python-format msgid "" "Error enabling swap device %s: %s\n" "\n" "Devices in /etc/fstab should be specified by label, not by device name.\n" "\n" "Press OK to exit the installer." msgstr "" "%s ଅଦଳ ବଦଳ ଯନ୍ତ୍ରକୁ ସକ୍ରିୟ କରିବା ସମୟରେ ତୃଟି ସମୟରେ ତୃଟି: %s\n" "\n" "/etc/fstab ରେ ଉପକରଣ ନାମ ପରିବର୍ତ୍ତେ ସୂଚକ ଦ୍ବାରା ନିର୍ଦ୍ଦିଷ୍ଟ କରିବା ଉଚିତ।\n" "\n" "ସ୍ଥାପକକୁ ବିଦାୟ କରିବା ପାଇଁ OK ବଟନକୁ ଦବାନ୍ତୁ." #: ../fsset.py:1779 #, python-format msgid "" "Error enabling swap device %s: %s\n" "\n" "The /etc/fstab on your upgrade partition does not reference a valid swap " "partition.\n" "\n" "Press OK to exit the installer" msgstr "" "%sଅଦଳ ବଦଳ ଯନ୍ତ୍ରକୁ ସକ୍ରିୟ କରିବା ସମୟରେ ତୃଟି: %s\n" "\n" "ଆପଣଙ୍କ ଉନ୍ନତ ବିଭାଜନରେ /etc/fstabଟି ଗୋଟିଏ ବୈଧ ଅଦଳ ବଦଳ ବିଭାଜନକୁ ସଙ୍କେତ କରୁନାହିଁ।\n" "\n" "ସ୍ଥାପକକୁ ବିଦାୟ କରିବା ପାଇଁ OK ବଟନକୁ ଦବାନ୍ତୁ." #: ../fsset.py:1785 #, python-format msgid "" "Error enabling swap device %s: %s\n" "\n" "This most likely means this swap partition has not been initialized.\n" "\n" "Press OK to exit the installer." msgstr "" "%s swap ଉପକରଣକୁ ସକ୍ରିୟ କରିବା ସମୟରେ ତୃଟି: %s\n" "\n" "ସମ୍ଭବତଃ ଏହି swap ବିଭାଜନକୁ ଏପର୍ଯ୍ଯନ୍ତ ପ୍ରାରମ୍ଭିକୃତ କରାଯାଇ ନାହିଁ।\n" "\n" "ସ୍ଥାପକକୁ ବିଦାୟ କରିବା ପାଇଁ OK ବଟନକୁ ଦବାନ୍ତୁ." #: ../fsset.py:1859 #, python-format msgid "" "An error occurred trying to format %s. This problem is serious, and the " "install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "%s କୁ ଫର୍ମାଟ କରିବାର ପ୍ରଚେଷ୍ଟା କରିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିଲିଖିତ ହେଲା। ଏହି ସମସ୍ଯାଟି ଗମ୍ଭୀର ଅଟେ, " "ଏବଂ ସ୍ଥାପନ ପ୍ରକ୍ରାୟା ଆଗକୁ ବଢି ପାରିବ ନାହିଁ।\n" "\n" "ସ୍ଥାପକକୁ ବିଦାୟ କରିବା ପାଇଁ OK ବଟନକୁ ଦବାନ୍ତୁ." #: ../fsset.py:1909 #, python-format msgid "" "An error occurred trying to migrate %s. This problem is serious, and the " "install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "%s କୁ ଉତ୍ପ୍ରବାସିତ କରିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିଲିଖିତ ହେଲା। ଏହି ସମସ୍ଯାଟି ଗମ୍ଭୀର ଅଟେ, ଏବଂ ସ୍ଥାପନ " "ପ୍ରକ୍ରିୟା ଆଗକୁ ବଢିପାରିବ ନାହିଁ।\n" "\n" "ସ୍ଥାପକକୁ ବିଦାୟ କରିବା ପାଇଁ OK ବଟନକୁ ଦବାନ୍ତୁ." #: ../fsset.py:1945 ../fsset.py:1954 msgid "Invalid mount point" msgstr "ଅବୈଧ ମାଉଣ୍ଟ ବିନ୍ଦୁ" #: ../fsset.py:1946 #, python-format msgid "" "An error occurred when trying to create %s. Some element of this path is " "not a directory. This is a fatal error and the install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "%s କୁ ସୃଷ୍ଟି କରିବାର ପ୍ରଚେଷ୍ଟା କରିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିଲିଖିତ ହେଲା। ଏହି ପଥରେ ଥିବା କିଛି ବସ୍ତୁ " "ଡିରେକ୍ଟୋରି ନୁହଁନ୍ତି। ଏହା ଗୋଟିଏ ମାରାତ୍ମକ ତୃଟି ଅଟେ ଏବଂ ସ୍ଥାପନ ପ୍ରକ୍ରିୟା ଆଗକୁ ବଢି ପାରିବ ନାହିଁ।\n" "\n" "ସ୍ଥାପକକୁ ବିଦାୟ କରିବା ପାଇଁ OK ବଟନକୁ ଦବାନ୍ତୁ." #: ../fsset.py:1955 #, python-format msgid "" "An error occurred when trying to create %s: %s. This is a fatal error and " "the install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "%s କୁ ସୃଷ୍ଟି କରିବାର ପ୍ରଚେଷ୍ଟା କରିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିଲିଖିତ ହେଲା: %s। ଏହା ଗୋଟିଏ ମାରାତ୍ମକ " "ତୃଟି ଅଟେ ଏବଂ ସ୍ଥାପନ ପ୍ରକ୍ରିୟା ଆଗକୁ ବଢି ପାରିବ ନାହିଁ।\n" "\n" "ସ୍ଥାପକକୁ ବିଦାୟ କରିବା ପାଇଁ OK ବଟନକୁ ଦବାନ୍ତୁ." #: ../fsset.py:1969 msgid "Unable to mount filesystem" msgstr "ଫାଇଲ ତନ୍ତ୍ରକୁ ଆହରଣ କରିବାରେ ଅସମର୍ଥ" #: ../fsset.py:1970 #, python-format msgid "" "An error occurred mounting device %s as %s. You may continue installation, " "but there may be problems." msgstr "" "%s ଉପକରଣକୁ %s ଭାବରେ ଆରୋହିତ (ମାଉଣ୍ଟ) କରିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିଲିଖିତ ହେଲା। ଆପଣ ସ୍ଥାପନ " "ପ୍ରକ୍ରିୟାକୁ ଜାରି ରଖି ପାରନ୍ତି, କିନ୍ତୁ ସେଠାରେ କିଛି ସମସ୍ଯା ଦେଖା ଦେଇପାରେ।" #: ../fsset.py:1986 #, python-format msgid "" "Error mounting device %s as %s: %s\n" "\n" "Devices in /etc/fstab should be specified by label or UUID, not by device " "name.\n" "\n" "Press OK to exit the installer." msgstr "" "%s ଉପକରଣକୁ %s ଭାବରେ ମାଉଣ୍ଟ କରିବା ସମୟରେ ତୃଟି: %s\n" "\n" "/etc/fstab ରେ ଥିବା ଉପକରଣ ମାନଙ୍କୁ ଉପକରଣ ନାମ ପରିବର୍ତ୍ତେ ସୂଚକ କିମ୍ବା UUID ଦ୍ବାରା ନିର୍ଦ୍ଦିଷ୍ଟ " "କରିବା ଉଚିତ।\n" "\n" "ସ୍ଥାପକକୁ ବିଦାୟ କରିବା ପାଇଁ OK ବଟନକୁ ଦବାନ୍ତୁ." #: ../fsset.py:1993 #, python-format msgid "" "Error mounting device %s as %s: %s\n" "\n" "Press OK to exit the installer." msgstr "" "ଉପକରଣ %sକୁ %s ଆକାରରେ ସ୍ଥାପନ କରିବାରେ ଅସମର୍ଥ:%s\n" "\n" "ସ୍ଥାପକକୁ ବିଦାୟ କରିବା ପାଇଁ OK ବଟନକୁ ଦବାନ୍ତୁ." #: ../fsset.py:2011 msgid "" "Error finding / entry.\n" "\n" "This is most likely means that your fstab is incorrect.\n" "\n" "Press OK to exit the installer." msgstr "" "/ ପ୍ରବିଷ୍ଟିକୁ ପାଇବାରେ ତୃଟି।\n" "\n" "ସମ୍ଭବତଃ ଏହାର ଅର୍ଥ ହେଉଛି ଆପଣଙ୍କର fstab ଫାଇଲଟି ଭୂଲ ଅଛି।\n" "\n" "ଆପଣଙ୍କ ତନ୍ତ୍ରକୁ ପୁନର୍ଚାଳନ କରିବା ପାଇଁ 'ଠିକ ଅଛି' ବଟନକୁ ଦବାନ୍ତୁ।" #: ../fsset.py:2722 msgid "Duplicate Labels" msgstr "ନକଲି ସୂଚକ" #: ../fsset.py:2723 #, python-format msgid "" "Multiple devices on your system are labelled %s. Labels across devices must " "be unique for your system to function properly.\n" "\n" "Please fix this problem and restart the installation process." msgstr "" "ଆପଣଙ୍କ ତନ୍ତ୍ରରେ ଏକାଧିକ ଉପକରଣ %s ଭାବରେ ସୂଚୀତ ହୋଇଛନ୍ତି। ଆପଣଙ୍କ ତନ୍ତ୍ରର ସଠିକ ଚାଳନ ପାଇଁ " "ଉପକରଣ ମାନଙ୍କ ପାଇଁ ବ୍ଯବହୃତ ସୂଚକ ଗୁଡିକ ଅନନ୍ଯ ହେବା ଉଚିତ।\n" "\n" "ଦୟାକରି ଏହି ସମସ୍ଯାକୁ ସମାଧାନ କରନ୍ତୁ ଏବଂ ସ୍ଥାପନ ପ୍ରକ୍ରିୟାକୁ ପୁନର୍ଚାଳିତ କରନ୍ତୁ।" #: ../fsset.py:2888 msgid "Formatting" msgstr "ଫର୍ମାଟ କରୁଅଛି" #: ../fsset.py:2889 #, python-format msgid "Formatting %s file system..." msgstr "%s ଫାଇଲ ତନ୍ତ୍ରକୁ ଫର୍ମାଟ କରୁଅଛି..." #: ../gui.py:108 msgid "An error occurred copying the screenshots over." msgstr "ପରଦା ପ୍ରତିଛବିକୁ ନକଲ କରିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିଲିଖିତ ହେଲା।" #: ../gui.py:119 msgid "Screenshots Copied" msgstr "ପରଦା ପ୍ରତିଛବିର ନକଲ କରାଗଲା" #: ../gui.py:120 msgid "" "The screenshots have been saved into the directory:\n" "\n" "\t/root/anaconda-screenshots/\n" "\n" "You can access these when you reboot and login as root." msgstr "" "ପରଦା ପ୍ରତିଛବି ମାନଙ୍କୁ ଡିରେକ୍ଟୋରିରେ ସଂରକ୍ଷିତ କରାଯାଇଛି:\n" "\n" "\t/root/anaconda-screenshots/\n" "\n" "ପୁନର୍ଚାଳନ କରି ଏବଂ ପ୍ରମୂଖ ଚାଳକ ଭାବରେ ଲଗଇନ କରି ଆପଣ ଏଗୁଡିକୁ ଅଭିଗମ କରିପାରିବେ।" #: ../gui.py:163 msgid "Saving Screenshot" msgstr "ପରଦା ପ୍ରତିଛବିକୁ ସଂରକ୍ଷିତ କରୁଅଛି" #: ../gui.py:164 #, python-format msgid "A screenshot named '%s' has been saved." msgstr "'%s' ନାମରେ ନାମିତ ଗୋଟିଏ ପରଦା ପ୍ରତିଛବିକୁ ସଂରକ୍ଷିତ କରାଗଲା।" #: ../gui.py:167 msgid "Error Saving Screenshot" msgstr "ପରଦା ପ୍ରତିଛବିକୁ ସଂରକ୍ଷିତ କରିବା ସମୟରେ ତୃଟି" #: ../gui.py:168 msgid "" "An error occurred while saving the screenshot. If this occurred during " "package installation, you may need to try several times for it to succeed." msgstr "" "ପରଦା ପ୍ରତିଛବି ମାନଙ୍କୁ ସଂରକ୍ଷିତ କରିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିଲିଖିତ ହେଲା। ଯଦି ଏହା ପ୍ଯାକେଜ ସ୍ଥାପନ " "ସମୟରେ ଘଟିଥାଏ, ଏହାର ସଫଳତା ପାଇଁ ଆପଣଙ୍କୁ ଏକାଧିକ ଥର ପ୍ରଚେଷ୍ଟା କରିବା ପାଇଁ ପଡିବ।" #: ../gui.py:233 ../text.py:576 msgid "Fix" msgstr "ସଠିକ କରନ୍ତୁ" #: ../gui.py:234 ../rescue.py:190 ../text.py:577 #: ../textw/bootloader_text.py:72 ../textw/constants_text.py:56 #: ../loader/driverdisk.c:485 ../loader/driverdisk.c:495 #: ../loader/hdinstall.c:231 msgid "Yes" msgstr "ହଁ" #: ../gui.py:235 ../rescue.py:190 ../rescue.py:192 ../text.py:578 #: ../textw/bootloader_text.py:72 ../textw/constants_text.py:60 #: ../loader/driverdisk.c:485 ../loader/driverdisk.c:495 msgid "No" msgstr "ନାଁ" #: ../gui.py:237 ../text.py:580 ../text.py:706 ../loader/net.c:108 #: ../loader/net.c:409 ../loader/net.c:463 ../loader/net.c:606 #: ../loader/net.c:614 ../loader/net.c:1040 ../loader/net.c:1047 msgid "Retry" msgstr "ପୁନଃପ୍ରଚେଷ୍ଟା କରନ୍ତୁ" #: ../gui.py:238 ../text.py:581 msgid "Ignore" msgstr "ଆଗ୍ରହ୍ଯ କରିଦିଅନ୍ତୁ" #: ../gui.py:239 ../gui.py:908 ../gui.py:1496 ../partIntfHelpers.py:245 #: ../partIntfHelpers.py:536 ../text.py:108 ../text.py:109 ../text.py:582 #: ../textw/bootloader_text.py:202 ../textw/constants_text.py:48 #: ../loader/dirbrowser.c:145 ../loader/driverdisk.c:246 #: ../loader/kickstart.c:375 ../loader/loader.c:434 ../loader/loader.c:546 msgid "Cancel" msgstr "ବାତିଲ କରନ୍ତୁ" #: ../gui.py:581 ../text.py:508 msgid "Installation Key" msgstr "ସ୍ଥାପନ ଚାବି" #: ../gui.py:652 ../text.py:318 msgid "" "Choose a passphrase for your encrypted devices. You will be prompted for the " "passphrase during system boot." msgstr "" "ଆପଣଙ୍କର ସଂଗୁପ୍ତ ଉପକରଣ ପାଇଁ ଗୋଟିଏ ପ୍ରବେଶ ସଂକେତ ଚୟନକରନ୍ତୁ. ଆପଣଙ୍କୁ ତନ୍ତ୍ର ବୁଟ କରିବା ସମୟରେ " "ପ୍ରବେଶ ସଂକେତ ପଚରାଯିବ." #: ../gui.py:671 ../gui.py:679 ../text.py:356 ../text.py:366 msgid "Error with passphrase" msgstr "ପ୍ରବେଶ ସଙ୍କେତ ଜନିତ ତୃଟି" #: ../gui.py:672 ../text.py:357 msgid "The passphrases you entered were different. Please try again." msgstr "ଆପଣ ଭରଣ କରିଥିବା ପ୍ରବେଶ ସଙ୍କେତ ଗୁଡିକ ଅଲଗା ଅଟନ୍ତି। ଦୟାକରି ପୁନର୍ବାର ପ୍ରଚେଷ୍ଟା କରନ୍ତୁ।" #: ../gui.py:680 msgid "The passphrase must be at least eight characters long." msgstr "ପ୍ରବେଶ ସଙ୍କେତଟି ଅତିକମରେ ଆଠ ଅକ୍ଷର ବିଶିଷ୍ଟ ହେବା ଉଚିତ।" #: ../gui.py:714 ../text.py:390 #, python-format msgid "" "Device %s is encrypted. In order to access the device's contents during " "installation you must enter the device's passphrase below." msgstr "" "%s ଯନ୍ତ୍ରଟି ସଂଗୁପ୍ତ ଅଟେ। ଯନ୍ତ୍ରର ସୂଚୀଗୁଡିକୁ ସ୍ଥାପନ ସମୟରେ ପାଇବାକୁ ହେଲେ ଆପଣଙ୍କୁ ଯନ୍ତ୍ରର ପ୍ରବେଶ " "ସଂକେତ ନିମ୍ନରେ ଭରଣ କରିବାକୁ ହେବ।" #: ../gui.py:771 #, python-format msgid "Bugzilla (%s)" msgstr "Bugzilla (%s)" #: ../gui.py:801 msgid "No devices found" msgstr "କୌଣସି ଉପକରଣ ମିଳିଲା ନାହିଁ" #: ../gui.py:920 ../gui.py:921 ../gui.py:1033 ../gui.py:1034 #: tmp/anaconda.glade.h:2 msgid "_Debug" msgstr "ତୃଟିମୁକ୍ତ କରନ୍ତୁ (_D)" #: ../gui.py:1080 ../gui.py:1082 ../gui.py:1493 ../livecd.py:113 msgid "Exit installer" msgstr "ସ୍ଥାପକକୁ ବନ୍ଦ କରନ୍ତୁ" #: ../gui.py:1082 ../text.py:293 ../text.py:301 msgid "Debug" msgstr "ତୃଟିମୁକ୍ତ କରନ୍ତୁ" #: ../gui.py:1084 ../text.py:297 msgid "Exception Occurred" msgstr "ବ୍ଯତିକ୍ରମ ପରିଲିକ୍ଷିତ ହେଲା" #: ../gui.py:1282 ../text.py:553 msgid "Error Parsing Kickstart Config" msgstr "କିକ୍-ଷ୍ଟାର୍ଟ ବିନ୍ଯାସକୁ ବିଶ୍ଲେଷଣ କରିବା ସମୟରେ ତୃଟି" #: ../gui.py:1328 msgid "default:LTR" msgstr "default:LTR" #: ../gui.py:1408 ../text.py:701 msgid "Error!" msgstr "ତୃଟି!" #: ../gui.py:1409 ../text.py:702 #, python-format msgid "" "An error occurred when attempting to load an installer interface component.\n" "\n" "className = %s" msgstr "" "ଗୋଟିଏ ସ୍ଥାପକ ଅନ୍ତରାପୃଷ୍ଠ ଉପାଦାନକୁ ଧାରଣ କରିବାର ପ୍ରଚେଷ୍ଟା କରିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିଲିଖିତ " "ହେଲା।\n" "\n" "ଶ୍ରେଣୀନାମ = %s" #: ../gui.py:1414 ../image.py:164 ../image.py:194 ../packages.py:402 #: ../packages.py:407 msgid "_Exit" msgstr "ପ୍ରସ୍ଥାନ କରନ୍ତୁ (_E)" #: ../gui.py:1415 ../image.py:164 ../image.py:194 ../livecd.py:203 #: ../yuminstall.py:636 ../yuminstall.py:987 ../yuminstall.py:1047 #: ../yuminstall.py:1283 msgid "_Retry" msgstr "ପୁନଃପ୍ରଚେଷ୍ଟା କରନ୍ତୁ(_R)" #: ../gui.py:1418 ../packages.py:172 ../packages.py:406 msgid "The installer will now exit..." msgstr "ସ୍ଥାପକଟି ବର୍ତମାନ ବାହାରକୁ ବାହାରି ଯିବ..." #: ../gui.py:1421 ../packages.py:409 msgid "Your system will now be rebooted..." msgstr "ବର୍ତମାନ ଆପଣଙ୍କ ତନ୍ତ୍ରଟି ପୁନର୍ଚାଳିତ ହେବ..." #: ../gui.py:1422 ../image.py:253 ../packages.py:173 ../packages.py:410 #: ../partedUtils.py:1260 ../yuminstall.py:1334 msgid "_Reboot" msgstr "ପୁନର୍ଚାଳିତ କରନ୍ତୁ (_R)" #: ../gui.py:1424 msgid "Exiting" msgstr "ବନ୍ଦ ହେଉଅଛି" #: ../gui.py:1494 msgid "Are you sure you wish to exit the installation?" msgstr "ଆପଣ ନିଶ୍ଚିତ କି ଆପଣ ସ୍ଥାପନ କ୍ରିୟାରୁ ବାହାରି ଯିବାକୁ ରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../gui.py:1503 #, python-format msgid "%s Installer" msgstr "%s ସ୍ଥାପକ" #: ../gui.py:1510 msgid "Unable to load title bar" msgstr "ଶୀର୍ଷକ ଦଣ୍ଡକୁ ଧାରଣ କରିବାରେ ଅସମର୍ଥ" #: ../gui.py:1566 msgid "Install Window" msgstr "ୱିଣ୍ଡୋକୁ ସ୍ଥାପନ କରନ୍ତୁ" #: ../image.py:83 #, python-format msgid "" "The ISO image %s has a size which is not a multiple of 2048 bytes. This may " "mean it was corrupted on transfer to this computer.\n" "\n" "It is recommended that you exit and abort your installation, but you can " "choose to continue if you think this is in error." msgstr "" "%s ISO ପ୍ରତିଛବିର ଗୋଟିଏ ଆକାର ଅଛି ଯାହାକି ୨୦୪୮ ବାଇଟର ଗୋଟିଏ ଗୁଣିତକ ନୁହେଁ। ଏହାର ଅର୍ଥ ଏହା " "ହୋଇପାରେ କି ଏହାକୁ କମ୍ପୁଟରକୁ ସ୍ଥାନାନ୍ତରିତ କରିବା ସମୟରେ ଏହା ନଷ୍ଟ ହୋଇ ଯାଇଥିଲା।\n" "\n" "ଏହା ପରାମର୍ଶିତ ଯେ ଆପଣ ବନ୍ଦ କରି ଆପଣଙ୍କ ସ୍ଥାପନକୁ ପରିତ୍ଯାଗ କରିପାରିବେ, କିନ୍ତୁ ଯଦି ଆପଣ ଏହାକୁ ଗୋଟିଏ " "ତୃଟି ବୋଲି ମନେ କରୁଛନ୍ତି ତାହାହେଲେ ଆପଣ ଆଗକୁ ବଢିବା ପାଇଁ ଚୟନ କରିପାରନ୍ତି।" #: ../image.py:156 msgid "Couldn't Mount ISO Source" msgstr "ISO ଉତ୍ସକୁ ମାଉଣ୍ଟ କରିପାରିଲା ନାହିଁ" #: ../image.py:157 #, python-format msgid "" "An error occurred mounting the source device %s. This may happen if your " "ISO images are located on an advanced storage device like LVM or RAID, or if " "there was a problem mounting a partition. Click exit to abort the " "installation." msgstr "" "%s ଉତ୍ସ ଉପକରଣକୁ ମାଉଣ୍ଟ କରିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ଘଟିଲା। LVM କିମ୍ବା RAID ପରି ଗୋଟିଏ ଉନ୍ନତ " "ଭଣ୍ଡାର ଉପକରଣରେ ଆପଣଙ୍କ ISO ପ୍ରତିଛବି ଗୁଡିକ ଅବସ୍ଥିତ ଥିଲେ, କିମ୍ବା ଗୋଟିଏ ବିଭାଜନକୁ ମାଉଣ୍ଟ କରିବା " "ସମୟରେ ଗୋଟିଏ ସମସ୍ଯା ଦେଖା ଦେଇଥିଲେ ଏହା ଘଟିପାରେ। ସ୍ଥାପନକୁ ପରିତ୍ଯାଗ କରିବା ପାଇଁ ବନ୍ଦ କରନ୍ତୁ " "ବଟନକୁ ଦବାନ୍ତୁ।" #: ../image.py:185 msgid "Missing ISO 9660 Image" msgstr "ଅନୁପସ୍ଥିତ ISO 9660 ପ୍ରତିଛବି" #: ../image.py:186 #, python-format msgid "" "The installer has tried to mount image #%s, but cannot find it on the hard " "drive.\n" "\n" "Please copy this image to the drive and click Retry. Click Exit to abort " "the installation." msgstr "" "ସ୍ଥାପକଟି #%s ପ୍ରତିଛବିକୁ ମାଉଣ୍ଟ କରିବାର ପ୍ରଚେଷ୍ଟା କରିଅଛି, କିନ୍ତୁ ଏହାକୁ ହାର୍ଡ-ଡ୍ରାଇଭରେ ପାଇପାରିବ " "ନାହିଁ।\n" "\n" "ଦୟାକରି ଏହି ପ୍ରତିଛବିକୁ ଡ୍ରାଇଭରେ ନକଲ କରନ୍ତୁ ଏବଂ 'ପୁନଃ ପ୍ରଚେଷ୍ଟା' ବିକଳ୍ପକୁ ଦବାନ୍ତୁ। ସ୍ଥାପନ " "ପ୍ରକ୍ରିୟାକୁ ପରିତ୍ଯାଗ କରିବା ପାଇଁ 'ପୁନର୍ଚାଳନ' ବଟନକୁ ଦବାନ୍ତୁ।" #: ../image.py:244 msgid "Required Install Media" msgstr "ଜରୂରୀ ସ୍ଥାପନ ମାଧ୍ଯମ" #: ../image.py:245 #, python-format msgid "" "The software you have selected to install will require the following discs:\n" "\n" "%s\n" "Please have these ready before proceeding with the installation. If you " "need to abort the installation and exit please select \"Reboot\"." msgstr "" "ସ୍ଥାପନ ପାଇଁ ଆପଣ ଚୟନ କରିଥିବା ସଫଟୱେର ନିମ୍ନଲିଖିତ ଡିସ୍କ ମାନଙ୍କୁ ଆବଶ୍ୟକ କରିବ:\n" "\n" "%s\n" "ସ୍ଥାପନ ପ୍ରକ୍ରିୟା ସହିତ ଆଗକୁ ବଢିବା ପୂର୍ବରୁ ଦୟାକରି ଏଗୁଡିକୁ ପ୍ରସ୍ତୁତ ରଖନ୍ତୁ। ଯଦି ଆପଣଙ୍କୁ ଏହି ସ୍ଥାପନ " "ପରିତ୍ଯାଗ କରି ପ୍ରସ୍ଥାନ କରିବା ପାଇଁ ପଡେ ତାହାହେଲେ ଦୟାକରି \"ପୁନର୍ଚାଳନ\" ବିକଳ୍ପକୁ ଚୟନ କରନ୍ତୁ।" #: ../image.py:253 ../livecd.py:383 ../packages.py:356 ../packages.py:407 #: ../packages.py:410 ../yuminstall.py:758 ../yuminstall.py:847 #: ../yuminstall.py:1318 ../yuminstall.py:1334 msgid "_Back" msgstr "ପଛକୁ (_B)" #: ../image.py:292 #, python-format msgid "" "An error occurred unmounting the disc. Please make sure you're not " "accessing %s from the shell on tty2 and then click OK to retry." msgstr "" "ଡିସ୍କକୁ ଅନମାଉଣ୍ଟ କରିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିଲିଖିତ ହେଲା। ଦୟାକରି ଏହା ନିଶ୍ଚିତ କରନ୍ତୁ ଯେ ଆପଣ %s କୁ " "tty2ରେ ଆବରଣରୁ ଅଭିଗମ କରୁନାହାଁନ୍ତି ଏବଂ ତା'ପରେ ପୁନଃପ୍ରଚେଷ୍ଟା କରିବା ପାଇଁ 'ଠିକ ଅଛି' ବଟନକୁ ଦବାନ୍ତୁ।" #: ../installclass.py:73 msgid "Install on System" msgstr "ତନ୍ତ୍ରରେ ସ୍ଥାପନ କରନ୍ତୁ" #: ../instdata.py:118 msgid "Unknown Device" msgstr "ଅଜଣା ଉପକରଣ" #: ../instdata.py:119 #, python-format msgid "" "The installation source given by device %s could not be found. Please check " "your parameters and try again." msgstr "" "ଉପକରଣ %s ଦ୍ୱାରା ଦିଆଯାଇଥିବା କୌଣସି ସ୍ଥାପନ ଉତ୍ସ ମିଳିଲା ନାହିଁ. ଦୟାକରି ଆପଣଙ୍କର ପ୍ରାଚଳଗୁଡ଼ିକୁ ଯାଞ୍ଚ କରନ୍ତୁ ଏବଂ " "ପୁଣି ଚେଷ୍ଟାକରନ୍ତୁ." #: ../iscsi.py:449 ../iscsi.py:450 msgid "Initializing iSCSI initiator" msgstr "iSCSI ପ୍ରାରମ୍ଭକକୁ ପ୍ରାରମ୍ଭିକୃତ କରୁଅଛି" #: ../kickstart.py:93 #, python-format msgid "" "There was an error running the kickstart script at line %s. You may examine " "the output in %s. This is a fatal error and your install will be aborted. " "Press the OK button to exit the installer." msgstr "" " %s ଧାଡିରେ କିକସ୍ଟାର୍ଟ ସ୍କ୍ରିପ୍ଟଟକୁ ଚଳାଇବା ସମୟରେ ଗୋଟିଏ ତୃଟି ଘଟିଲା। ଆପଣ ନିର୍ଗମକୁ %sରେ ପରୀକ୍ଷଣ " "କରିପାରିବେ। ଏହା ଗୋଟିଏ ମାରାତ୍ମକ ତୃଟି ଅଟେ ଏବଂ ଆପଣଙ୍କର ସ୍ଥାପନକୁ ପରିତ୍ଯାଗ କରି ଦିଆଯିବ nଆପଣଙ୍କ " "ତନ୍ତ୍ରକୁ ବନ୍ଦ କରିବା ପାଇଁ 'ଠିକ ଅଛି' ବଟନକୁ ଦବାନ୍ତୁ।" #: ../kickstart.py:108 ../kickstart.py:110 msgid "Scriptlet Failure" msgstr "ସ୍କ୍ରିପଲେଟ୍ ବିଫଳତା" #: ../kickstart.py:1056 ../kickstart.py:1073 msgid "Running..." msgstr "ଚାଲୁଅଛି..." #: ../kickstart.py:1057 msgid "Running post-install scripts" msgstr "ପଶ୍ଚାତ ସ୍ଥାପନ ସ୍କ୍ରିପ୍ଟ କୁ ଚଳାଉଛି" #: ../kickstart.py:1074 msgid "Running pre-install scripts" msgstr "ଉପ ସ୍ଥାପନ ସ୍କ୍ରିପ୍ଟ କୁ ଚଳାଉଛି" #: ../kickstart.py:1105 msgid "Missing Package" msgstr "ଅନୁପସ୍ଥିତ ପ୍ଯାକେଜ" #: ../kickstart.py:1106 #, python-format msgid "" "You have specified that the package '%s' should be installed. This package " "does not exist. Would you like to continue or abort your installation?" msgstr "" "'%s' ପ୍ଯାକେଜଟି ସ୍ଥାପିତ ହେବ ବୋଲି ଆପଣ ଉଲ୍ଲେଖ କରିଛନ୍ତି। ଏହି ପ୍ଯାକେଜଟି ଉପଲବ୍ଧ ନାହିଁ।ଆପଣ ଆଗକୁ " "ବଢିବା ପାଇଁ ଚାହୁଁଛନ୍ତି ନା ଏହି ସ୍ଥାପନକୁ ପରିତ୍ଯାଗ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../kickstart.py:1112 ../kickstart.py:1150 msgid "_Abort" msgstr "ବିବରଣୀ (_A)" #: ../kickstart.py:1142 msgid "Missing Group" msgstr "ଅନୁପସ୍ଥିତ ସମୂହ" #: ../kickstart.py:1143 #, python-format msgid "" "You have specified that the group '%s' should be installed. This group does " "not exist. Would you like to continue or abort your installation?" msgstr "" "'%s' ପ୍ଯାକେଜଟି ସ୍ଥାପିତ ହେବ ବୋଲି ଆପଣ ଉଲ୍ଲେଖ କରିଛନ୍ତି। ଏହି ପ୍ଯାକେଜଟି ଉପଲବ୍ଧ ନାହିଁ।ଆପଣ ଆଗକୁ " "ବଢିବା ପାଇଁ ଚାହୁଁଛନ୍ତି ନା ଏହି ସ୍ଥାପନକୁ ପରିତ୍ଯାଗ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../livecd.py:108 msgid "Unable to find image" msgstr "ପ୍ରତିଛବିକୁ ଖୋଜିବାରେ ଅସମର୍ଥ" #: ../livecd.py:109 #, python-format msgid "The given location isn't a valid %s live CD to use as an installation source." msgstr "ଗୋଟିଏ ସ୍ଥାପନ ଉତ୍ସ ଭାବରେ ବ୍ଯବହାର କରିବା ପାଇଁ ପ୍ରଦତ୍ତ ଗୋଟିଏ ବୈଧ %s ପ୍ରତ୍ଯେକ୍ଷ ସି.ଡି. ନୁହେଁ।" #: ../livecd.py:171 msgid "Copying live image to hard drive." msgstr "ପ୍ରତ୍ଯେକ୍ଷ ପ୍ରତିଛବିକୁ ହାର୍ଡ ଡ୍ରାଇଭକୁ ନକଲ କରୁଅଛି।" #: ../livecd.py:197 msgid "" "There was an error installing the live image to your hard drive. This could " "be due to bad media. Please verify your installation media.\n" "\n" "If you exit, your system will be left in an inconsistent state that will " "require reinstallation." msgstr "" "ଆପଣଙ୍କର ହାର୍ଡ ଡ୍ରଇଭରେ ଜୀବନ୍ତ ପ୍ରତିଛବି ସ୍ଥାପନ କରିବା ଦ୍ୱାରା ଗୋଟିଏ ତ୍ରୁଟି ହୋଇଥିଲା. ଏହା ସମ୍ଭବତଃ " "ଗୋଟିଏ ଖରାପ ସଞ୍ଚାର ମାଧ୍ଯମ ଯୋଗୁଁ ହୋଇଥାଇପାରେ.\n" "\n" "ଯଦି ଆପଣ ପ୍ରସ୍ଥାନ କରନ୍ତି, ଆପଣଙ୍କ ତନ୍ତ୍ରଟି ଗୋଟିଏ ଅପ୍ରୀତିକର ଅବସ୍ଥାକୁ ଚାଲିଯିବ ଏବଂ ଆପଣଙ୍କୁ ପୁନଃସ୍ଥାପନ " "କରିବା ପାଇଁ ପଡିବ।" #: ../livecd.py:226 msgid "Doing post-installation" msgstr "ସ୍ଥାପନ ପରବର୍ତ୍ତୀ ପ୍ରକ୍ରିୟା ସମ୍ପାଦନ କରୁଅଛି" #: ../livecd.py:227 msgid "" "Performing post-installation filesystem changes. This may take several " "minutes..." msgstr "ସ୍ଥାପନ ପରେ ଫାଇଲ ତନ୍ତ୍ର ମାନଙ୍କୁ ପରିବର୍ତ୍ତନ କରୁଅଛି। ଏହା କିଛି ମିନିଟ ନେଇପାରେ ..." #: ../livecd.py:378 #, python-format msgid "" "The root filesystem you created is not large enough for this live image " "(%.2f MB required)." msgstr "" "ଆପଣ ସୃଷ୍ଟି କରିଥିବା ମୂଳସ୍ଥାନ ଫାଇଲତନ୍ତ୍ର ଟି ଏହି ଜୀବନ୍ତ ପ୍ରତିଛବି ପାଇଁ ଆବଶ୍ୟକ ମୁତାବକ ବଡ ନୁହଁ (%.2f " "MB ଆବଶ୍ୟକ)।" #: ../network.py:56 msgid "Hostname must be 255 or fewer characters in length." msgstr "ଆଧାରନାମଟି 255 କିମ୍ବା ତଦନିମ୍ନ ଅକ୍ଷର ବିଶିଷ୍ଟ ହୋଇଥିବା ଉଚିତ." #: ../network.py:62 msgid "" "Hostname must start with a valid character in the ranges 'a-z', 'A-Z', or '0-" "9'" msgstr "" "ଆଧାରନାମଟି 'a-z', 'A-Z' କିମ୍ବା '0-9' ପରିସର ମଧ୍ଯରେ ଥିବା ଗୋଟିଏ ବୈଧ ଅକ୍ଷର ସହିତ ପ୍ରାରମ୍ଭ " "ହେବା ଉଚିତ" #: ../network.py:67 msgid "Hostnames can only contain the characters 'a-z', 'A-Z', '0-9', '-', or '.'" msgstr "ଆଧାରନାମଟି କେବଳ 'a-z', 'A-Z', '-', କିମ୍ବା '.' ଅକ୍ଷର ମାନଙ୍କୁ ଧାରଣ କରି ପାରିବ।" #: ../network.py:166 msgid "IP address is missing." msgstr "ଆଇ.ପି. ଠିକଣା ମିଳୁନାହିଁ।" #: ../network.py:170 msgid "" "IPv4 addresses must contain four numbers between 0 and 255, separated by " "periods." msgstr "IPv4 ଠିକଣା ଗୁଡିକ ବିନ୍ଦୁ ଦ୍ବାରା ପୃଥକ 0 ଏବଂ 255 ମଧ୍ଯରେ ଚାରିଟି ସଂଖ୍ଯା ଧାରଣ କରିବା ଉଚିତ।" #: ../network.py:173 #, python-format msgid "'%s' is not a valid IPv6 address." msgstr "%s ଟି ଗୋଟିଏ ବୈଧ IPv6 ଠିକଣା ନୁହେଁ।" #: ../network.py:175 #, python-format msgid "'%s' is an invalid IP address." msgstr "'%s' ଗୋଟିଏ ଅବୈଧ ଆଇ.ପି. ଠିକଣା ଅଟେ।" #: ../packages.py:114 msgid "Resizing Failed" msgstr "ଆକାର ବଦଳାଇବା ନିଷ୍ଫଳ ହେଲା" #: ../packages.py:115 #, python-format msgid "There was an error encountered resizing the device %s." msgstr "%s ଯନ୍ତ୍ରର ଆକାର ବଦଳାଇବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିଲକ୍ଷିତ ହେଲା।" #: ../packages.py:148 msgid "Activating" msgstr "ସକ୍ରିୟଣ କରୁଅଛି" #: ../packages.py:148 msgid "Activating new partitions. Please wait..." msgstr "ନୂତନ ବିଭାଜନଗୁଡ଼ିକୁ ସକ୍ରିୟ କରୁଅଛି. ଦୟାକରି ଅପେକ୍ଷା କରନ୍ତୁ..." #: ../packages.py:171 msgid "LVM operation failed" msgstr "LVM ପ୍ରୟୋଗ ବିଫଳ ହେଲା" #: ../packages.py:327 msgid "Invalid Key" msgstr "ଅବୈଧ ଚାବି" #: ../packages.py:328 msgid "The key you entered is invalid." msgstr "ଆପଣ ଭରଣ କରିଥିବା ଚାବି ଅବୈଧ ଅଟେ।" #: ../packages.py:356 msgid "_Skip" msgstr "ବାଦ ଦିଅନ୍ତୁ (_S)" #: ../packages.py:388 ../packages.py:411 msgid "Warning! This is pre-release software!" msgstr "ଚେତାବନୀ! ଏହା ବିମୋଚନ ପୂର୍ବର ସଫଟୱେର (ବିଟା) ଅଟେ!" #: ../packages.py:389 #, python-format msgid "" "Thank you for downloading this pre-release of %s.\n" "\n" "This is not a final release and is not intended for use on production " "systems. The purpose of this release is to collect feedback from testers, " "and it is not suitable for day to day usage.\n" "\n" "To report feedback, please visit:\n" "\n" " %s\n" "\n" "and file a report against '%s'.\n" msgstr "" "ଏହି %s ବୀଟାକୁ ଡାଉନ-ଲୋଡ (ଆହରଣ) କରିଥିବାରୁ ଧନ୍ଯବାଦ।\n" "\n" "ଏହା ଅନ୍ତିମ ସଂସ୍କରଣ ନୁହେଁ ଏବଂ ଏହାକୁ ଉତ୍ପାଦନ ତନ୍ତ୍ରରେ ପ୍ରୟୋଗ କରିବା ଉଦ୍ଦେଶ୍ଯରେ ପ୍ରସ୍ତୁତ କରାଯାଇ " "ନାହିଁ। ପରୀକ୍ଷକ ମାନଙ୍କ ପ୍ରତିକ୍ରିୟାକୁ ସଂଗ୍ରହ କରିବା ଉଦ୍ଦେଶ୍ଯରେ ଏହି ସଂସ୍କରଣକୁ ପ୍ରସ୍ତୁତ କରାଯାଇଛି, ଏବଂ " "ଏହା ଦୈନିକ ବ୍ଯବହାର ପାଇଁ ଉପଯୁକ୍ତ ନୁହେଁ।\n" "\n" "ପ୍ରତିକ୍ରିୟା ଗୁଡିକୁ ଜଣାଇବା ପାଇଁ, ଦୟାକରି ଏଠାକୁ ଜାଆନ୍ତୁ:\n" "\n" " %s\n" "\n" "ଏବଂ '%s' ବିରୋଧରେ ଗୋଟିଏ ତୃଟି ଦାଖଲ କରନ୍ତୁ।\n" #: ../packages.py:402 msgid "_Install anyway" msgstr "ତଥାପି ସ୍ଥାପିତ କରନ୍ତୁ (_I)" #: ../partIntfHelpers.py:43 msgid "Please enter a volume group name." msgstr "ଦୟାକରି ଗୋଟିଏ ଘନଫଳ ସମୂହକୁ ଭରଣ କରନ୍ତୁ।" #: ../partIntfHelpers.py:47 msgid "Volume Group Names must be less than 128 characters" msgstr "ଘନଫଳ ସମୂହର ନାମ ୧୨୮ଟି ଅକ୍ଷରରୁ କମ ହେବା ଉଚିତ" #: ../partIntfHelpers.py:50 #, python-format msgid "Error - the volume group name %s is not valid." msgstr "ତୃଟି - %s ଘନଫଳ ସମୂହ ନାମଟି ବୈଧ ନୁହେଁ।" #: ../partIntfHelpers.py:55 msgid "" "Error - the volume group name contains illegal characters or spaces. " "Acceptable characters are letters, digits, '.' or '_'." msgstr "" "ତୃଟି - ଘନଫଳ ସମୂହର ନାମ ଅବୈଧ ଅକ୍ଷର ଏବଂ ଖାଲି ସ୍ଥାନ ମାନଙ୍କୁ ଧାରଣ କରିଛି। ଗ୍ରହଣୀୟ ଅକ୍ଷର ଗୁଡିକ " "ହେଲା ଲିପି, ଅଙ୍କ, '.' କିମ୍ବା '_'।" #: ../partIntfHelpers.py:65 msgid "Please enter a logical volume name." msgstr "ଦୟାକରି ଗୋଟିଏ ତାର୍କିକ ଘନଫଳର ନାମ ଭରଣ କରନ୍ତୁ।" #: ../partIntfHelpers.py:69 msgid "Logical Volume Names must be less than 128 characters" msgstr "ତାର୍କିକ ଘନଫଳର ନାମ ୧୨୮ଟି ଅକ୍ଷରରୁ କମ ହେବା ଆବଶ୍ୟକ" #: ../partIntfHelpers.py:73 #, python-format msgid "Error - the logical volume name %s is not valid." msgstr "ତୃଟି - %s ତାର୍କିକ ଘନଫଳର ନାମଟି ବୈଧ ନୁହେଁ।" #: ../partIntfHelpers.py:79 msgid "" "Error - the logical volume name contains illegal characters or spaces. " "Acceptable characters are letters, digits, '.' or '_'." msgstr "" "ତୃଟି - ତାର୍କିକ ଘନଫଳର ନାମ ଅବୈଧ ଅକ୍ଷର ଏବଂ ଖାଲି ସ୍ଥାନ ମାନଙ୍କୁ ଧାରଣ କରିଛି। ଗ୍ରହଣୀୟ ଅକ୍ଷର ଗୁଡିକ " "ହେଲା ଲିପି, ଅଙ୍କ, '.' କିମ୍ବା '_'।" #: ../partIntfHelpers.py:103 #, python-format msgid "" "The mount point %s is invalid. Mount points must start with '/' and cannot " "end with '/', and must contain printable characters and no spaces." msgstr "" "%s ମାଉଣ୍ଟ ବିନ୍ଦୁଟି ଅବୈଧ ଅଟେ। ମାଉଣ୍ଟ ବିନ୍ଦୁ ଗୁଡିକ '/' ସହିତ ପ୍ରାରମ୍ଭ ହେବା ଉଚିତ ଏବଂ କଦାପି '/' " "ସହ ଶେଷ ହୋଇ ପାରିବେ ନାହିଁ, ସେଗୁଡିକ ମୂଦ୍ରଣଯୋଗ୍ଯ ଅକ୍ଷରରୂପ ଧାରଣ କରୁଥିବା ଉଟିତ ଉଟିତ ଏବଂ କୌଣସି ଖାଲି " "ସ୍ଥାନି ଧାରଣ କରୁ ନ ଥିବା ଉଚିତ।" #: ../partIntfHelpers.py:110 msgid "Please specify a mount point for this partition." msgstr "ଦୟାକରି ଏହି ବିଭାଜନ ପାଇଁ ଗୋଟିଏ ମାଉଣ୍ଟ ବିନ୍ଦୁକୁ ଉଲ୍ଲେଖିତ କରନ୍ତୁ।" #: ../partIntfHelpers.py:120 #, python-format msgid "This partition is part of the RAID device /dev/md%s." msgstr "ଏହି ବିଭାଜନଟି /dev/md%s RAID ଉପକରଣର ଅଂଶ ଅଟେ।" #: ../partIntfHelpers.py:123 msgid "This partition is part of a RAID device." msgstr "ଏହି ବିଭାଜନଟି ଗୋଟିଏ RAID ଉପକରଣର ଅଂଶ ଅଟେ।" #: ../partIntfHelpers.py:128 #, python-format msgid "This partition is part of the LVM volume group '%s'." msgstr "ଏହି ବିଭାଜନଟି '%s' LVM ଘନଫଳ ସମୂହର ଅଂଶ ଅଟେ।" #: ../partIntfHelpers.py:131 msgid "This partition is part of a LVM volume group." msgstr "ଏହି ବିଭାଜନଟି ଗୋଟିଏ LVM ଘନଫଳ ସମୂହର ଅଂଶ ଅଟେ।" #: ../partIntfHelpers.py:146 ../partIntfHelpers.py:154 #: ../partIntfHelpers.py:161 ../partIntfHelpers.py:171 #: ../partIntfHelpers.py:195 msgid "Unable To Delete" msgstr "ଅପସାରିତ କରିବାରେ ଅସମର୍ଥ" #: ../partIntfHelpers.py:147 msgid "You must first select a partition to delete." msgstr "ଆପଣ ଅପସାରିତ କରିବା ପାଇଁ ପ୍ରଥମେ ଗୋଟିଏ ବିଭାଜନକୁ ଚୟନ କରିବା ଉଚିତ।" #: ../partIntfHelpers.py:155 msgid "You cannot delete free space." msgstr "ଆପଣ ଖାଲି ସ୍ଥାନ ମାନଙ୍କୁ ଅପସାରିତ କରି ପାରିବେ ନାହିଁ।" #: ../partIntfHelpers.py:162 msgid "You cannot delete a partition of a LDL formatted DASD." msgstr "ଗୋଟିଏ LDL ଫର୍ମାଟ DASDର ଏକ ବିଭାଜନକୁ ଆପଣ ଅପସାରିତ କରିପାରିବେ ନାହିଁ।" #: ../partIntfHelpers.py:172 #, python-format msgid "" "You cannot delete this partition, as it is an extended partition which " "contains %s" msgstr "" "ଆପଣ ଏହି ବିଭାଜନକୁ ଅପସାରିତ କରିପାରିବେ ନାହିଁ, ଯେହେତୁ ଏହା ଗୋଟିଏ ବିସ୍ତାରିତ ବିଭାଜନ ଯାହାକି %sକୁ ଧାରଣ " "କରିଅଛି" #: ../partIntfHelpers.py:190 ../iw/raid_dialog_gui.py:591 msgid "This partition is holding the data for the hard drive install." msgstr "ଏହି ବିଭାଜନଟି ହାର୍ଡ ଡ୍ରାଇଭ ସ୍ଥାପନ ପାଇଁ ତଥ୍ଯ ଧାରଣ କରିଛି।" #: ../partIntfHelpers.py:196 msgid "" "You cannot delete this partition:\n" "\n" msgstr "" "ଆପଣ ଏହି ବିଭାଜନକୁ ଅପସାରିତ କରିପାରିବେ ନାହିଁ:\n" "\n" #: ../partIntfHelpers.py:241 ../partIntfHelpers.py:535 #: ../iw/lvm_dialog_gui.py:794 msgid "Confirm Delete" msgstr "ଅପସାରଣକୁ ନିଶ୍ଚିତ କରନ୍ତୁ" #: ../partIntfHelpers.py:242 #, python-format msgid "You are about to delete all partitions on the device '/dev/%s'." msgstr "ଆପଣ '/dev/%s' ଉପକରଣର ସମସ୍ତ ବିଭାଜନକୁ ଅପସାରିତ କରିବା ଉପରେ।" #: ../partIntfHelpers.py:245 ../partIntfHelpers.py:536 #: ../iw/lvm_dialog_gui.py:797 ../iw/lvm_dialog_gui.py:1145 #: ../iw/osbootwidget.py:104 ../iw/partition_gui.py:1384 msgid "_Delete" msgstr "କାଢନ୍ତୁ(_D)" #: ../partIntfHelpers.py:302 msgid "Notice" msgstr "ଅଧିସୂଚନା" #: ../partIntfHelpers.py:303 #, python-format msgid "" "The following partitions were not deleted because they are in use:\n" "\n" "%s" msgstr "" "ନିମ୍ନଲିଖିତ ବିଭାଜନ ମାନଙ୍କୁ ଅପସାରିତ କରିହେଲା ନାହିଁ କାରଣ ସେଗୁଡିକ ବ୍ଯବହୃତ ହେଉଛନ୍ତି:\n" "\n" "%s" #: ../partIntfHelpers.py:319 ../partIntfHelpers.py:332 #: ../partIntfHelpers.py:358 ../partIntfHelpers.py:369 msgid "Unable To Edit" msgstr "ସମ୍ପାଦନ କରିବାରେ ଅସମର୍ଥ" #: ../partIntfHelpers.py:320 msgid "You must select a partition to edit" msgstr "ସମ୍ପାଦନ କରିବା ପାଇଁ ଆପଣ ଗୋଟିଏ ବିଭାଜନକୁ ଚୟନ କରିବା ଉଚିତ" #: ../partIntfHelpers.py:332 ../partIntfHelpers.py:370 msgid "" "You cannot edit this partition:\n" "\n" msgstr "" "ଆପଣ ଏହି ବିଭାଜନକୁ ସମ୍ପାଦିତ କରିପାରିବେ ନାହିଁ:\n" "\n" #: ../partIntfHelpers.py:359 #, python-format msgid "" "You cannot edit this partition, as it is an extended partition which " "contains %s" msgstr "" "ଆପଣ ଏହି ବିଭାଜନକୁ ସମ୍ପାଦିତ କରିପାରିବେ ନାହିଁ, ଯେହେତୁ ଏହା ଗୋଟିଏ ବିସ୍ତାରିତ ବିଭାଜନ ଯାହାକି %sକୁ ଧାରଣ " "କରିଅଛି" #: ../partIntfHelpers.py:391 msgid "Format as Swap?" msgstr "swap ରୂପରେ ଫର୍ମାଟ କରନ୍ତୁ?" #: ../partIntfHelpers.py:392 #, python-format msgid "" "/dev/%s has a partition type of 0x82 (Linux swap) but does not appear to be " "formatted as a Linux swap partition.\n" "\n" "Would you like to format this partition as a swap partition?" msgstr "" "/dev/%sର ଗୋଟିଏ 0x82 (Linux swap ପ୍ରକାର ଅଛି) କିନ୍ତୁ ଏହା ଗୋଟିଏ Linux swap ବିଭାଜନ ଭଳି " "ଫର୍ମାଟ ହୋଇନାହିଁ।\n" "\n" "ଆପଣ ଏହି ବିଭାଜନକୁ ଗୋଟିଏ swap ବିଭାଜନ ରୂପରେ ସଂରୂପଣ କରିବା ପାଇଁ ଚାହାଁନ୍ତି କି?" #: ../partIntfHelpers.py:412 #, python-format msgid "You need to select at least one hard drive to install %s." msgstr "%s କୁ ସ୍ଥାପନ କରିବା ପାଇଁ ଆପଣ ଅତି କମରେ ଗୋଟିଏ ହାର୍ଡ-ଡ୍ରାଇଭକୁ ଚୟନ କରିବା ଉଚିତ।" #: ../partIntfHelpers.py:417 msgid "" "You have chosen to use a pre-existing partition for this installation " "without formatting it. We recommend that you format this partition to make " "sure files from a previous operating system installation do not cause " "problems with this installation of Linux. However, if this partition " "contains files that you need to keep, such as home directories, then " "continue without formatting this partition." msgstr "" "ଆପଣ ଏହି ସ୍ଥାପନ ପାଇଁ ବିନା ଫର୍ମାଟ ଗୋଟିଏ ପୂର୍ବ ଉପସ୍ଥିତ ବିଭାଜନର ପ୍ରୟୋଗକୁ ବାଛିଛନ୍ତି। ଆମେ ପରାମର୍ଶ " "ଦେଉଛୁ ଯେ ଆପଣ ଏହି ବିଭାଜନକୁ ଫର୍ମାଟ କରନ୍ତୁ ଯାହାଦ୍ବାରା ପୂର୍ବ ପ୍ରଚାଳନ ତନ୍ତ୍ରର ସ୍ଥାପନ Linuxର ଏହି " "ସ୍ଥାପନ ପାଇଁ କୌଣସି ସମସ୍ଯା ସୃଷ୍ଟି କରିବ ନାହିଁ। ତଥାପି, ଯଦି ଏହି ବିଭାଜନରେ ଆପଣଙ୍କର ଆବଶ୍ୟକ ଫାଇଲ ଗୁଡିକ " "ଅଛି, ଯେପରିକି ମୂଳସ୍ଥାନ ପଞ୍ଜିକା, ତାହାହେଲେ ଏହି ବିଭାଜନକୁ ଫର୍ମାଟ ନ କରି ଆଗକୁ ବଢନ୍ତୁ।" #: ../partIntfHelpers.py:425 msgid "Format?" msgstr "ଫର୍ମାଟ କରିବ କି?" #: ../partIntfHelpers.py:425 ../iw/partition_gui.py:1039 msgid "_Modify Partition" msgstr "ବିଭାଜନକୁ ରୂପାନ୍ତରିତ କରନ୍ତୁ (_M)" #: ../partIntfHelpers.py:425 msgid "Do _Not Format" msgstr "ଫର୍ମାଟ କରନ୍ତୁ ନାହିଁ(_N)" #: ../partIntfHelpers.py:433 msgid "Error with Partitioning" msgstr "ବିଭାଜନ ସମୟରେ ତୃଟି" #: ../partIntfHelpers.py:434 #, python-format msgid "" "The following critical errors exist with your requested partitioning scheme. " "These errors must be corrected prior to continuing with your install of %s.\n" "\n" "%s" msgstr "" "ନିମ୍ନଲିଖିତ ଗୁରୁତର ତୃଟି ଗୁଡିକ ଆପଣଙ୍କ ଦ୍ବାରା ନିବେଦିତ ବିଭାଜନ ଯୋଜନା ସହିତ ଉପସ୍ଥିତ ଅଛନ୍ତି। ଏହି ତୃଟି ଗୁଡିକୁ " "ଆପଣଙ୍କର %sର ସ୍ଥାପନକୁ ଜାରି କରିବା ପୂର୍ବରୁ ସଠିକ କରାଯିବା ଉଚିତ।\n" "\n" "%s" #: ../partIntfHelpers.py:448 msgid "Partitioning Warning" msgstr "ବିଭାଜନୀୟ ଚେତାବନୀ" #: ../partIntfHelpers.py:449 #, python-format msgid "" "The following warnings exist with your requested partition scheme.\n" "\n" "%s\n" "\n" "Would you like to continue with your requested partitioning scheme?" msgstr "" "ଆପଣଙ୍କ ଦ୍ବାରା ନିବେଦିତ ବିଭାଜନ ଯୋଜନା ସହିତ ନିମ୍ନଲିଖିତ ଚେତାବନୀ ଗୁଡିକ ଉପସ୍ଥିତ ଅଛନ୍ତି।\n" "\n" "%s\n" "\n" "ଆପଣ ନିବେଦିତ ବିଭାଜନ ଯୋଜନା ସହିତ ଆଗକୁ ବଢିବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି?" #: ../partIntfHelpers.py:463 ../iw/partition_gui.py:671 msgid "" "The following pre-existing partitions have been selected to be formatted, " "destroying all data." msgstr "ନିମ୍ନଲିଖିତ ପୂର୍ବ-ଉପସ୍ଥିତ ବିଭାଜନର ସମସ୍ତ ପୂର୍ବ ତଥ୍ଯ ମାନଙ୍କୁ ନଷ୍ଟ କରି ଫର୍ମାଟ କରିବା ପାଇଁ ଚୟନ କରାଯାଇଛି" #: ../partIntfHelpers.py:466 msgid "" "Select 'Yes' to continue and format these partitions, or 'No' to go back and " "change these settings." msgstr "" "ଆଗକୁ ବଢି ଏହି ବିଭାଜନ ମାନଙ୍କୁ ଫର୍ମାଟ କରିବା ପାଇଁ 'ହଁ' କୁ ଚୟନ କରନ୍ତୁ, କିମ୍ବା ପଛକୁ ଯାଇ ଏହି ବିନ୍ଯାସ " "ଗୁଡିକ ବଦଳାଇବା ପାଇଁ 'ନାଁ' କୁ ଦବାନ୍ତୁ।" #: ../partIntfHelpers.py:472 msgid "Format Warning" msgstr "ସଂରୂପ ଚେତାବନୀ" #: ../partIntfHelpers.py:520 #, python-format msgid "" "You are about to delete the volume group \"%s\".\n" "\n" "ALL logical volumes in this volume group will be lost!" msgstr "" "ଆପଣ \"%s\" ଘନଫଳ ସମୂହକୁ ଅପସାରିତ କରିବା ପାଇଁ ଯାଉଛନ୍ତି।\n" "\n" "ଏହି ଘନଫଳ ସମୂହରେ ଥିବା ସମସ୍ତ ତାର୍କିକ ଘନଫଳ ଗୁଡିକ ନଷ୍ଟ ହୋଇଯିବେ।" #: ../partIntfHelpers.py:524 #, python-format msgid "You are about to delete the logical volume \"%s\"." msgstr "ଆପଣ \"%s\" ଘନଫଳ ସମୂହକୁ ଅପସାରିତ କରିବା ପାଇଁ ଯାଉଛନ୍ତି।" #: ../partIntfHelpers.py:527 msgid "You are about to delete a RAID device." msgstr "ଆପଣ ଗୋଟିଏ RAID ଉପକରଣ ଅପସାରିତ କରିବା ପାଇଁ ଯାଉଛନ୍ତି।" #: ../partIntfHelpers.py:530 #, python-format msgid "You are about to delete the /dev/%s partition." msgstr "ଆପଣ /dev/%s ବିଭାଜନକୁ ଅପସାରିତ କରିବା ପାଇଁ ଯାଉଛନ୍ତି।" #: ../partIntfHelpers.py:533 msgid "The partition you selected will be deleted." msgstr "ଆପଣ ଚୟନ କରିଥିବା ବିଭାଜନଟି ଅପସାରିତ ହୋଇଯିବ।" #: ../partIntfHelpers.py:543 msgid "Confirm Reset" msgstr "ପୁନଃସ୍ଥାପନ ପ୍ରକ୍ରିୟାକୁ ନିଶ୍ଚିତ କରନ୍ତୁ" #: ../partIntfHelpers.py:544 msgid "Are you sure you want to reset the partition table to its original state?" msgstr "ଆପଣ ନିଶ୍ଚିତ କି ଆପଣ ବିଭାଜନ ସାରଣୀକୁ ଏହାର ପୂର୍ବାବସ୍ଥାକୁ ଆଣିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../partRequests.py:275 ../partRequests.py:278 #, python-format msgid "The mount point %s must be formatted during live CD installs." msgstr "ଏହି ମାଉଣ୍ଟ ବିନ୍ଦୁ %s ଜୀବନ୍ତ CD ସ୍ଥାପନ ସମୟରେ ନିଶ୍ଚିତ ଭାବରେ ସଜ୍ଜା ହେବା ରହିବା ଉଚିତ।" #: ../partRequests.py:284 #, python-format msgid "This mount point is invalid. The %s directory must be on the / file system." msgstr "ଏହି ମାଉଣ୍ଟ ବିନ୍ଦୁଟି ଅବୈଧ ଅଟେ। %s ଡିରେକ୍ଟୋରିଟି / ଫାଇଲ ତନ୍ତ୍ରରେ ଥିବା ଉଚିତ।" #: ../partRequests.py:287 #, python-format msgid "" "The mount point %s cannot be used. It must be a symbolic link for proper " "system operation. Please select a different mount point." msgstr "" "%s ମାଉଣ୍ଟ ବିନ୍ଦୁକୁ ବ୍ଯବହାର କରିପାରିବ ନାହିଁ। ତନ୍ତ୍ରର ସଠିକ କାର୍ଯ୍ଯକଳାପ ପାଇଁ ଏହା ଗୋଟିଏ ପ୍ରତୀକାତ୍ମକ " "ସମ୍ପର୍କ ହେବା ଉଚିତ। ଦୟାକରି ଗୋଟିଏ ଭିନ୍ନ ମାଉଣ୍ଟ ବିନ୍ଦୁକୁ ଚୟନ କରନ୍ତୁ।" #: ../partRequests.py:296 msgid "This mount point must be on a linux file system." msgstr "ଏହି ମାଉଣ୍ଟ ବିନ୍ଦୁ ଗୋଟିଏ linux ଫାଇଲ ତନ୍ତ୍ରରେ ରହିବା ଉଚିତ।" #: ../partRequests.py:317 #, python-format msgid "" "The mount point \"%s\" is already in use, please choose a different mount " "point." msgstr "\"%s\" ମାଉଣ୍ଟ ବିନ୍ଦୁ ପୂର୍ବରୁ ବ୍ଯବହୃତ ହେଉଛି, ଦୟାକରି ଗୋଟିଏ ଭିନ୍ନ ମାଉଣ୍ଟ ବିନ୍ଦୁ ଚୟନ କରନ୍ତୁ।" #: ../partRequests.py:331 #, python-format msgid "" "The size of the %s partition (%10.2f MB) exceeds the maximum size of %10.2f " "MB." msgstr "%s ବିଭାଜନର ଆକାର (%10.2f ମେଗା-ବାଇଟ) ସର୍ବାଧିକ ଆକାର %10.2f ମେଗା-ବାଇଟକୁ ଅତିକ୍ରମ କରିଯାଏ" #: ../partRequests.py:539 #, python-format msgid "" "The size of the requested partition (size = %s MB) exceeds the maximum size " "of %s MB." msgstr "ନିବେଦିତ ବିଭାଜନର ଆକାର (ଆକାର = %s ମେଗା-ବାଇଟ) ସର୍ବାଧିକ ଆକାର %s ମେଗା-ବାଇଟ କୁ ଟପିଗଲା।" #: ../partRequests.py:544 #, python-format msgid "The size of the requested partition is negative! (size = %s MB)" msgstr "ନିବେଦିତ ବିଭାଜନର ଆକାର ଋଣାତ୍ମକ ଅଟେ! (ଆକାର = %s ମେଗା-ବାଇଟ)" #: ../partRequests.py:548 msgid "Partitions can't start below the first cylinder." msgstr "ପ୍ରଥମ ସିଲିଣ୍ଡର ଅଧୀନରେ ବିଭାଜନ ପ୍ରାରମ୍ଭ ହୋଇପାରିବ ନାହିଁ।" #: ../partRequests.py:551 msgid "Partitions can't end on a negative cylinder." msgstr "ଗୋଟିଏ ନିଷେଧାତ୍ମକ ସିଲିଣ୍ଡରରେ ବିଭାଜନ ପ୍ରାରମ୍ଭ ହୋଇପାରିବ ନାହିଁ।" #: ../partRequests.py:753 msgid "No members in RAID request, or not RAID level specified." msgstr "RAID ନିବେଦନରେ କୌଣସି ସଦସ୍ଯ ନାହାଁନ୍ତି, କିମ୍ବା RAID ସ୍ତର ନିର୍ଦ୍ଦିଷ୍ଟ କରାଯାଇ ନାହିଁ।" #: ../partRequests.py:758 #, python-format msgid "A RAID device of type %s requires at least %s members." msgstr "%s ପ୍ରକାରର ଗୋଟିଏ RAID ଉପକରଣ ଅତିକମରେ %s ସଦସ୍ଯଙ୍କୁ ଦରକାର କରିଥାଏ।" #: ../partRequests.py:767 #, python-format msgid "" "This RAID device can have a maximum of %s spares. To have more spares you " "will need to add members to the RAID device." msgstr "" "ରେଡ ଉପକରଣର ସର୍ବାଧିକ %s ଅତିରିକ୍ତ ସାଧନ ରହିପାରିବ। ଅଧିକ ଅତିରିକ୍ତ ଉପକରଣପାତି ପାଇବା ପାଇଁ ଆପଣ " "RAID ଉପକରଣରେ ସଦସ୍ଯ ମାନଙ୍କୁ ଯୋଗ କରିବା ଉଚିତ।" #: ../partRequests.py:1033 msgid "" "Logical volume size must be larger than the volume group's physical extent " "size." msgstr "ତାର୍କିକ ଘନଫଳର ଆକାର ଘନଫଳ ସମୂହର ଭୌତିକ ପରିମାଣ ଆକାରରୁ ବୃହତର ହେବା ଉଚିତ।" #: ../partedUtils.py:240 ../textw/partition_text.py:578 msgid "Foreign" msgstr "ବିଦେଶ" #: ../partedUtils.py:368 #, python-format msgid "" "The device %s is LDL formatted instead of CDL formatted. LDL formatted " "DASDs are not supported for usage during an install of %s. If you wish to " "use this disk for installation, it must be re-initialized causing the loss " "of ALL DATA on this drive.\n" "\n" "Would you like to reformat this DASD using CDL format?" msgstr "" "%s ଉପକରଣଟି CDL ଦ୍ବାରା ଫର୍ମାଟ ହେବା ପରିବର୍ତ୍ତେ LDL ଦ୍ବାରା ଫର୍ମାଟ ହୋଇଛି। %sର ଗୋଟିଏ ସ୍ଥାପନ " "ସମୟରେ ବ୍ଯବହାର ପାଇଁ LDL ଦ୍ବାରା ଫର୍ମାଟ DASD ଗୁଡିକ ସହାୟକ ନୁହଁନ୍ତି। ଯଦି ଆପଣ ସ୍ଥାପନ ପାଇଁ ଏହି " "ଡିସ୍କକୁ ବ୍ଯବହାର କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି, ଏହି ଚାଳନରେ ସମସ୍ତ ତଥ୍ଯକୁ ନଷ୍ଟ କରି ଏହାକୁ ପୁନଃ ପ୍ରାରମ୍ଭିକରଣ " "କରିବା ଉଚିତ।\n" "\n" "ଆପଣ CDL ଶୈଳୀ ବ୍ଯବହାର କରି DASDକୁ ପୁନଃ ସଂରୂପଣ କରିବା ପାଇଁ ଚାହିଁବେ କି?" #: ../partedUtils.py:398 #, python-format msgid "" "/dev/%s currently has a %s partition layout. To use this drive for the " "installation of %s, it must be re-initialized, causing the loss of ALL DATA " "on this drive.\n" "\n" "Would you like to re-initialize this drive?" msgstr "" "/dev/%s ନିକଟରେ ବର୍ତମାନ ଗୋଟିଏ %s ବିଭାଜନ ବିନ୍ଯାସ ଅଛି। %sର ସ୍ଥାପନ ପାଇଁ ଏହି ଡ୍ରାଇଭକୁ ବ୍ଯବହାର " "କରିବା ପାଇଁ, ଏହାକୁ ପୁନଃ ପ୍ରାରମ୍ଭିକରଣ କରିବା ଉଚିତ, ଯେପରି ଏହି ଡ୍ରାଇଭରେ ଥିବା ସମସ୍ତ ତଥ୍ଯ ଗୁଡିକ ନଷ୍ଟ " "ହୋଇଯିବ।\n" "\n" "ଆପଣ ଏହି ଡ୍ରାଇଭକୁ ପୁନଃପ୍ରାରମ୍ଭିକୃତ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି?" #: ../partedUtils.py:407 msgid "_Ignore drive" msgstr "ଉପକରଣକୁ ଏଡାଇ ଦିଅନ୍ତୁ (_I)" #: ../partedUtils.py:408 msgid "_Re-initialize drive" msgstr "ଡ୍ରାଇଭକୁ ପୁନଃ ପ୍ରାରମ୍ଭିକୃତ କରନ୍ତୁ (_R)" #: ../partedUtils.py:1015 msgid "Initializing" msgstr "ପ୍ରାରମ୍ଭିକରଣ କରୁଅଛି" #: ../partedUtils.py:1016 #, python-format msgid "Please wait while formatting drive %s...\n" msgstr "ଦୟାକରି %s ଡ୍ରାଇଭକୁ ଫର୍ମାଟ କରିବା ପର୍ଯ୍ଯନ୍ତ ଅପେକ୍ଷା କରନ୍ତୁ...\n" #: ../partedUtils.py:1101 #, python-format msgid "" "The partition table on device %s (%s %-0.f MB) was unreadable.\n" "\n" "To create new partitions it must be initialized, causing the loss of ALL " "DATA on this drive.\n" "\n" "This operation will override any previous installation choices about which " "drives to ignore.\n" "\n" "Would you like to initialize this drive, erasing ALL DATA?" msgstr "" "%s (%s %-0.f MB) ଉପକରଣରେ ବିଭାଜନ ସାରଣୀକୁ ପଢି ହେଲା ନାହିଁ.\n" "\n" "ନୂତନ ବିଭାଜନ ସୃଷ୍ଟି କରିବା ପାଇଁ ଏହା ପ୍ରାରମ୍ଭିକୃତ ହୋଇଥିବା ଉଚିତ, ଏହି ଡ୍ରାଇଭରୁ ସମସ୍ତ ତଥ୍ଯକୁ ନଷ୍ଟ କରି.\n" "\n" "କେଉଁ ଉପକରଣକୁ ଆଗ୍ରହ୍ଯ କରାଯିବ ତାହାର ବିବରଣୀ ଧାରଣ କରିଥିବା ପୂର୍ବ ସ୍ଥାପନ ବିକଳ୍ପକୁ ଏହି ପ୍ରକ୍ରିୟାଟି " "ଅଧିରୋହଣ କରିବ।\n" "\n" "ସମସ୍ତ ତଥ୍ଯକୁ ଅପସାରିତ କରି, ଆପଣ ଏହି ଉପକରଣକୁ ପ୍ରାରମ୍ଭକରଣ କରିବା ପାଇଁ ଚାହାଁନ୍ତି କି?" #: ../partedUtils.py:1251 #, python-format msgid "" "The drive /dev/%s has more than 15 partitions on it. The SCSI subsystem in " "the Linux kernel does not allow for more than 15 partitons at this time. " "You will not be able to make changes to the partitioning of this disk or use " "any partitions beyond /dev/%s15 in %s" msgstr "" "/dev/%s ଡ୍ରାଇଭରେ ୧୫ରୁ ଅଧିକ ବିଭାଜନ ଅଛି। Linux କର୍ଣ୍ଣଲରେ ଥିବା SCSI ଉପତନ୍ତ୍ର ଏହି ସମୟରେ " "୧୫ଟି ବିଭାଜନରୁ ଅଧିକ ବିଭାଜନକୁ ସମର୍ଥନ କରୁନାହିଁ। ଆପଣ ଏହି ଡିସ୍କର ବିଭାଜନକୁ ପରିବର୍ତ୍ତନ କରିପାରିବେ ନାହିଁ " "କିମ୍ବା %s ରେ /dev/%s15 ପରିସର ବାହାରେ କୌଣସି ବିଭାଜନକୁ ବ୍ଯବହାର କରିପାରିବେ ନାହିଁ।" #: ../partedUtils.py:1335 msgid "No Drives Found" msgstr "କୌଣସି ଡ୍ରାଇଭ ମିଳିଲା ନାହିଁ" #: ../partedUtils.py:1336 msgid "" "An error has occurred - no valid devices were found on which to create new " "file systems. Please check your hardware for the cause of this problem." msgstr "" "ଗୋଟିଏ ତୃଟି ପରିଲିଖିତ ହେଲା - କୌଣସି ବୈଧ ଉପକରଣ ମିଳିଲା ନାହିଁ ଯାହା ଉପରେ ନୂତନ ଫାଇଲ ତନ୍ତ୍ର ସୃଷ୍ଟି " "କରାଯିବ।ଏହି ସମସ୍ଯାର କାରଣ ପାଇଁ ଆପଣଙ୍କର ହାର୍ଡୱେରକୁ ଯାଞ୍ଚ କରନ୍ତୁ।" #: ../partitions.py:84 msgid "Installation cannot continue." msgstr "ସ୍ଥାପନ ପ୍ରକ୍ରିୟା ଜାରି ହୋଇ ପାରିବା ନାହିଁ।" #: ../partitions.py:85 msgid "" "The partitioning options you have chosen have already been activated. You " "can no longer return to the disk editing screen. Would you like to continue " "with the installation process?" msgstr "" "ଆପଣ ଚୟନ କରିଥିବା ବିଭଜନୀୟ ବିକଳ୍ପକୁ ପୂର୍ବରୁ ସକ୍ରିୟଣ କରାଯାଇଛି। ଆପଣ ପରଦାକୁ ସମ୍ପାଦନ କରି ଏହି ଡିସ୍କକୁ " "ପ୍ରତ୍ଯାବର୍ତ୍ତନ କରି ପାରିବେନାହିଁ। ଆପଣ ଏହି ସ୍ଥାପନ ପ୍ରକ୍ରିୟାକୁ ଜାରି ରଖିବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି?" #: ../partitions.py:125 msgid "Encrypt device?" msgstr "ଉପକରଣକୁ ସଂଗୁପ୍ତ କରିବେ କି?" #: ../partitions.py:126 msgid "" "You specified block device encryption should be enabled, but you have not " "supplied a passphrase. If you do not go back and provide a passphrase, block " "device encryption will be disabled." msgstr "" "ଆପଣ ଉଲ୍ଲେଖ କରିଛନ୍ତି ଯେ ବ୍ଲକ ଉପକରଣ ସଂଗୁପ୍ତକୁ ସକ୍ରିୟ କରାଯାଇଛି, କିନ୍ତୁ ଆପଣ ପ୍ରବେଶ ସଂକେତ " "ପ୍ରଦାନ କରିନାହାନ୍ତି. ଯଦି ଆପଣ ପଛକୁଯାଇ ପ୍ରବେଶ ସଂକେତ ପ୍ରଦାନ ନକରନ୍ତି, ତେବେ ବ୍ଲକ ଉପକରଣ " "ସଂଗୁପ୍ତ ନିଷ୍କ୍ରିୟ ହୋଇଯିବ." #: ../partitions.py:133 ../partitions.py:263 ../textw/constants_text.py:52 #: ../loader/cdinstall.c:438 ../loader/driverdisk.c:246 #: ../loader/driverdisk.c:277 ../loader/driverdisk.c:361 #: ../loader/driverselect.c:81 ../loader/driverselect.c:179 #: ../loader/driverselect.c:205 ../loader/hdinstall.c:231 #: ../loader/hdinstall.c:289 ../loader/kbd.c:138 ../loader/loader.c:473 #: ../loader/loader.c:493 ../loader/loader.c:1365 ../loader/loader.c:1394 #: ../loader/net.c:515 ../loader/net.c:891 ../loader/net.c:1628 #: ../loader/net.c:1650 ../loader/nfsinstall.c:87 ../loader/urls.c:292 msgid "Back" msgstr "ପଛକୁ" #: ../partitions.py:133 ../partitions.py:263 ../rescue.py:242 #: ../iw/partition_gui.py:574 ../loader/cdinstall.c:198 #: ../loader/cdinstall.c:206 ../loader/driverdisk.c:446 msgid "Continue" msgstr "ଆଗକୁ ବଢନ୍ତୁ" #: ../partitions.py:154 msgid "Writing partitioning to disk" msgstr "ଡିସ୍କକୁ ଲିଖିତ ବିଭାଜନ କରି" #: ../partitions.py:155 msgid "" "The partitioning options you have selected will now be written to disk. Any " "data on deleted or reformatted partitions will be lost." msgstr "" "ଆପଣ ବାଛିଥିବା ବିଭାଜନ ବିକଳ୍ପକୁ ବର୍ତ୍ତମାନ ଡିସ୍କରେ ଲେଖାଯିବ. ଅପସାରିତ କିମ୍ବା ପୁନଃ ସଜ୍ଜିକରଣ ଶୈଳୀ " "ବିଭାଜନରେ ଥିବା ଯେକୌଣସି ତଥ୍ୟ ନଷ୍ଟ ହୋଇଯିବ." #: ../partitions.py:160 msgid "Go _back" msgstr "ପଛକୁ ଯାଆନ୍ତୁ (_b)" #: ../partitions.py:161 msgid "_Write changes to disk" msgstr "ଡିସ୍କରେ ଲିଖନ ପରିବର୍ତ୍ତନ (_W)" #: ../partitions.py:268 msgid "Confirm" msgstr "ନିଶ୍ଚିତ କରନ୍ତୁ" #: ../partitions.py:269 #, python-format msgid "" "Are you sure you want to skip entering a passphrase for device %s?\n" "\n" "If you skip this step the device's contents will not be available during " "installation." msgstr "" "ଆପଣ ନିଶ୍ଚିତ କି ଆପଣ ଯନ୍ତ୍ର %s ରେ ପ୍ରବେଶ ସଂକେତ ଭରଣକୁ ଏଡାଇଯିବାକୁ ଚାହୁଁଛନ୍ତି?\n" "\n" "ଯଦି ଆପଣ ଏହି ସୋପାନକୁ ଏଡାଇଯାଆନ୍ତି ତେବେ ସ୍ଥାପନ ସମୟରେ ଯନ୍ତ୍ରର ସୂଚି ଗୁଡିକ ଉପଲବ୍ଧ ହେବନାହିଁ।" #: ../partitions.py:1189 #, python-format msgid "" "You have not defined a root partition (/), which is required for " "installation of %s to continue." msgstr "" "ଆପଣ ଗୋଟିଏ ରୁଟ ବିଭାଜନ (/) କୁ ବ୍ଯାଖ୍ଯା କରି ନାହାଁନ୍ତି, ଯାହାକି %s ର ସ୍ଥାପନକୁ ଜାରି ରଖିବା ପାଇଁ " "ଆବଶ୍ୟକ।" #: ../partitions.py:1194 #, python-format msgid "" "Your root partition is less than 250 megabytes which is usually too small to " "install %s." msgstr "ଆପଣଙ୍କର ରୁଟ ବିଭାଜନ ୨୫୦ ମେଗା-ବାଇଟରୁ କମ ଅଛି ଯାହାକି ସାଧାରଣତଃ %sର ସ୍ଥାପନ ପାଇଁ ବହୁତ କମ ଅଟେ।" #: ../partitions.py:1220 msgid "You must create an EFI System Partition of at least 10 megabytes." msgstr "ଅତି କମରେ 10 ମେଗା-ବାଇଟର ଗୋଟିଏ EFI ତନ୍ତ୍ର ବିଭାଜନ ନିର୍ମାଣ କରିବା ଉଚିତ." #: ../partitions.py:1234 msgid "" "Your boot partition isn't on one of the first four partitions and thus won't " "be bootable." msgstr "" "ଆପଣଙ୍କ ବୁଟ ବିଭାଜନ ପ୍ରଥମ ଚାରିଟି ବିଭାଜନ ମଧ୍ଯରୁ କୌଣସି ଗୋଟିଏରେ ନାହିଁ ଏବଂ ତେଣୁ ଏହାକୁ ବୁଟ କରିହେବ " "ନାହିଁ।" #: ../partitions.py:1255 msgid "You must create an Apple Bootstrap partition." msgstr "ଆପଣ ଗୋଟିଏ Apple Bootstrap ବିଭାଜନ ସୃଷ୍ଟି କରିବା ଉଚିତ।" #: ../partitions.py:1277 msgid "You must create a PPC PReP Boot partition." msgstr "ଆପଣ ଗୋଟିଏ PPC PReP ବୁଟ ବିଭାଜନ ସୃଷ୍ଟି କରିବା ଉଚିତ।" #: ../partitions.py:1285 ../partitions.py:1296 #, python-format msgid "" "Your %s partition is less than %s megabytes which is lower than recommended " "for a normal %s install." msgstr "" "ଆପଣଙ୍କର %s ବିଭାଜନଟି %s ମେଗା-ବାଇଟରୁ କମ ଅଟେ ଯାହାକି ଗୋଟିଏ ସାଧାରଣ %s ସ୍ଥାପନ ପାଇଁ ପ୍ରତ୍ଯାଶିତ " "ଆକାରରୁ ଛୋଟ ଅଟେ।" #: ../partitions.py:1330 msgid "Installing on a USB device. This may or may not produce a working system." msgstr "" "ଗୋଟିଏ USB ଉପକରଣରେ ସ୍ଥାପନ କରୁଅଛି। ଏହା ଗୋଟିଏ କାର୍ଯ୍ଯକ୍ଷମ ତନ୍ତ୍ର ଉତ୍ପାଦନ କରିପାରେ କିମ୍ବା କରି " "ନପାରେ।" #: ../partitions.py:1333 msgid "" "Installing on a FireWire device. This may or may not produce a working " "system." msgstr "" "ଅଗ୍ନିକବଚ ଉପକରଣରେ ସ୍ଥାପନ କରୁଅଛି। ଏହା ଗୋଟିଏ କାର୍ଯ୍ଯକ୍ଷମ ତନ୍ତ୍ର ଉତ୍ପାଦନ କରିପାରେ କିମ୍ବା କରି " "ନପାରେ।" #: ../partitions.py:1343 msgid "Bootable partitions can only be on RAID1 devices." msgstr "ବୁଟ କରିବା ଯୋଗ୍ଯ ବିଭାଜନ କେବଳ RAID1 ଉପକରଣରେ ଥାଇପାରେ।" #: ../partitions.py:1348 msgid "Bootable partitions cannot be on a logical volume." msgstr "ବୁଟ କରିବା ଯୋଗ୍ଯ ବିଭାଜନ କେବେହେଲେ ଗୋଟିଏ ତାର୍କିକ ଘନଫଳରେ ନ ଥିବ।" #: ../partitions.py:1354 msgid "Bootable partitions cannot be on a RAID device." msgstr "ବୁଟ କରିବା ଯୋଗ୍ଯ ବିଭାଜନ ଗୁଡିକ ଗୋଟିଏ RAID ଉପକରଣରେ ରହିପାରିବ ନାହିଁ।" #: ../partitions.py:1359 ../partitions.py:1365 #, python-format msgid "Bootable partitions cannot be on an %s filesystem." msgstr "ବୁଟ କରିବା ଯୋଗ୍ଯ ବିଭାଜନଗୁଡିକ କେବେହେଲେ ଗୋଟିଏ %s ଫାଇଲତନ୍ତ୍ରରେ ରହିପାରିବ ନାହିଁ।" #: ../partitions.py:1369 msgid "Bootable partitions cannot be on an encrypted block device" msgstr "ବୁଟ କରିବା ଯୋଗ୍ଯ ବିଭାଜନ କେବେହେଲେ ଗୋଟିଏ ସଂଗୁପ୍ତ ଘନଫଳରେ ରହିପାରିବ ନାହିଁ।" #: ../partitions.py:1373 msgid "" "You have not specified a swap partition. Although not strictly required in " "all cases, it will significantly improve performance for most installations." msgstr "" "ଆପଣ ଗୋଟିଏ swap ବିଭାଜନକୁ ନିର୍ଦ୍ଦିଷ୍ଟ କରି ନାହାଁନ୍ତି। ଯଦିଓ ଏହା ବିଧିବଦ୍ଧ ଭାବରେ ସମସ୍ତ ସ୍ଥିତିରେ ଏହା " "ଆବଶ୍ୟକ ନୁହେଁ, ତଥାପି ଏହା ଅଧିକାଂଶ ସ୍ଥାପନର ଉତ୍ପାଦନ ଉଲ୍ଲେଖଯୋଗ୍ଯ ଭାବରେ ବ୍ରୁଦ୍ଧି କରାଇଥାଏ>" #: ../partitions.py:1380 #, python-format msgid "" "You have specified more than 32 swap devices. The kernel for %s only " "supports 32 swap devices." msgstr "" "ଆପଣ ୩୨ରୁ ଅଧିକ swap ଉପକରଣକୁ ଉଲ୍ଲେଖ କରିଛନ୍ତି। କେବଳ %sର କର୍ଣ୍ଣଲ ୩୨ swap ଉପକରଣ ମାନଙ୍କୁ " "ସହାୟକ ହୋଇଥାଏ।" #: ../partitions.py:1391 #, python-format msgid "" "You have allocated less swap space (%dM) than available RAM (%dM) on your " "system. This could negatively impact performance." msgstr "" "ଆପଣ କମ swap ସ୍ଥାନ (%dM) ବାଣ୍ଟିଛନ୍ତି ଯାହାକି ଆପଣଙ୍କ ତନ୍ତ୍ରରେ ଉପଲବ୍ଧ RAM (%dM) ଠାରୁ କମ " "ଅଟେ। ଏହା ଆପଣଙ୍କ ପ୍ରଦର୍ଶନ ଉପରେ ନକରାତ୍ମକ ପ୍ରଭାବ ପକାଇପାରେ।" #: ../partitions.py:1698 msgid "the partition in use by the installer." msgstr "ସ୍ଥାପକ ଦ୍ବାରା ବ୍ଯବହୃତ ବିଭାଜନ।" #: ../partitions.py:1701 msgid "a partition which is a member of a RAID array." msgstr "ଗୋଟିଏ ବିଭାଜନ ଯାହାକି RAID ଆରେର ଏକ ସଦସ୍ଯ ଅଟେ।" #: ../partitions.py:1704 msgid "a partition which is a member of a LVM Volume Group." msgstr "ଗୋଟିଏ ବିଭାଜନ ଯାହାକି LVM ଘନଫଳ ସମୂହର ଏକ ସଦସ୍ଯ ଅଟେ।" #: ../rescue.py:162 msgid "When finished please exit from the shell and your system will reboot." msgstr "ସମାପ୍ତ ହୋଇସାରିଲା ପରେ ଦୟାକରି ଆବରଣରୁ ବାହାରକୁ ଚାଲି ଯାଆନ୍ତୁ ଏବଂ ଆପଣଙ୍କ ତନ୍ତ୍ରକୁ ପୁନର୍ଚାଳନ କରନ୍ତୁ।" #: ../rescue.py:169 msgid "Unable to find /bin/sh to execute! Not starting shell" msgstr "ନିଷ୍ପାଦନ କରିବା ପାଇଁ /bin/shକୁ ଖୋଜିବାରେ ଅସମର୍ଥ! ସେଲ ଆରମ୍ଭ କରୁନାହିଁ" #: ../rescue.py:188 msgid "Setup Networking" msgstr "ବ୍ଯବସ୍ଥାପନ ନେଟୱାର୍କିଙ୍ଗ" #: ../rescue.py:189 msgid "Do you want to start the network interfaces on this system?" msgstr "ଆପଣ ନେଟୱାର୍କ ଅନ୍ତରାପୃଷ୍ଠକୁ ଏହି ତନ୍ତ୍ରରେ ପ୍ରାରମ୍ଭ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି?" #: ../rescue.py:197 msgid "" "Unable to activate a networking device. Networking will not be available in " "rescue mode." msgstr "" "ଗୋଟିଏ ନେଟୱର୍କିଙ୍ଗ ଉପକରଣକୁ ସକ୍ରିୟ କରିବାରେ ଅସମର୍ଥ. ନେଟୱର୍କିଙ୍ଗ ରକ୍ଷା ଧାରାରେ " "ଉପଲବ୍ଧ ହେବ ନାହିଁ." #: ../rescue.py:231 ../rescue.py:301 ../rescue.py:312 ../rescue.py:393 msgid "Rescue" msgstr "ଉଦ୍ଧାର କରନ୍ତୁ" #: ../rescue.py:232 #, python-format msgid "" "The rescue environment will now attempt to find your Linux installation and " "mount it under the directory %s. You can then make any changes required to " "your system. If you want to proceed with this step choose 'Continue'. You " "can also choose to mount your file systems read-only instead of read-write " "by choosing 'Read-Only'.\n" "\n" "If for some reason this process fails you can choose 'Skip' and this step " "will be skipped and you will go directly to a command shell.\n" "\n" msgstr "" "ସୁରକ୍ଷା ପରିବେଶଟି ବର୍ତ୍ତମାନ ଆପଣଙ୍କର Linux ସ୍ଥାପନକୁ ଖୋଜିବାର ପ୍ରଚେଷ୍ଟା କରିବ ଏବଂ ଏହାକୁ %s " "ଅଧୀନରେ ଆରୋହିତ କରିବ। ସେତେବେଳେ ଆପଣ ଆପଣଙ୍କ ତନ୍ତ୍ର ପାଇଁ ଆବଶ୍ୟକ ପରିବର୍ତ୍ତନ ମାନ କରିପାରିବେ। " "ଯଦି ଆପଣ ଏହି ପଦକ୍ଷେପ ସହିତ ଆଗକୁ ବଢିବା ପାଇଁ ଚାହୁଁଛନ୍ତି ତାହାହେଲେ 'ଆଗକୁ ବଢନ୍ତୁ' ବିକଳ୍ପ କୁ ଚୟନ " "କରନ୍ତୁ। ପଠନ-ଲିଖନ ପରିବର୍ତ୍ତେ ଆପଣ 'କେବଳ ପଠନୀୟ' ବିକଳ୍ପକୁ ଚୟନ କରି ଆପଣଙ୍କ ଫାଇଲ ତନ୍ତ୍ରକୁ କେବଳ " "ପଠନୀୟ ଧାରାରେ ମାଉଣ୍ଟ କରିପାରିବେ।\n" "\n" "ଯଦି କିଛି କାରଣ ବଶତଃ ପ୍ରକ୍ରିୟାଟି ବିଫଳ ହୋଇଯାଏ ତାହାହେଲେ ଆପଣ 'ଆଗ୍ରହ୍ଯ କରନ୍ତୁ' ବିକଳ୍ପକୁ ଚୟନ " "କରିପାରିବେ ଏବଂ ଏହି ପଦକ୍ଷେପକୁ ଏଡାଇ ଦିଆଯିବ ଏବଂ ଆପଣ ସିଧାସଳଖ ଭାବରେ ନିର୍ଦ୍ଦେଶ ଆବରଣକୁ ଚାଲିଯିବେ।\n" "\n" #: ../rescue.py:242 ../rescue.py:247 msgid "Read-Only" msgstr "କେବଳ ପଠନୀୟ" #: ../rescue.py:273 msgid "System to Rescue" msgstr "ଉଦ୍ଧାର କରିବା ପାଇଁ ତନ୍ତ୍ର" #: ../rescue.py:274 msgid "What partition holds the root partition of your installation?" msgstr "ଆପଣଙ୍କ ତନ୍ତ୍ରର ପ୍ରମୂଖ ଚାଳକ (ରୁଟ) ର ବିଭାଜନକୁ କେଉଁ ବିଭାଜନ ଧାରଣ କରିଅଛି?" #: ../rescue.py:276 ../rescue.py:280 ../text.py:706 ../text.py:708 msgid "Exit" msgstr "ପ୍ରସ୍ଥାନ କରନ୍ତୁ" #: ../rescue.py:302 msgid "" "Your system had dirty file systems which you chose not to mount. Press " "return to get a shell from which you can fsck and mount your partitions. " "The system will reboot automatically when you exit from the shell." msgstr "" "ଆପଣଙ୍କ ତନ୍ତ୍ରରେ ଅପ୍ରୀତିକର ଫାଇଲ ତନ୍ତ୍ର ମାନ ଅଛି ଯାହାକୁ ଆପଣ ମାଉଣ୍ଟ (ମାଉଣ୍ଟ) ନ କରିବା ପାଇଁ ସ୍ଥିର " "କରିଛନ୍ତି। ଆପଣଙ୍କ ବିଭାଜନକୁ fsck ଏବଂ ମାଉଣ୍ଟ ସମୟରେ ଆବଶ୍ୟକ ଗୋଟିଏ ଆବରଣକୁ ପାଇବା ପାଇଁ ଫେରନ୍ତୁ " "ବଟନକୁ ଦବାନ୍ତୁ। ଆପଣ ଆବରଣରୁ ପ୍ରସ୍ଥାନ କଲେ ତନ୍ତ୍ରଟି ସ୍ବତଃପୁନର୍ଚାଳିତ ହୋଇଯିବ।" #: ../rescue.py:313 #, python-format msgid "" "Your system has been mounted under %s.\n" "\n" "Press to get a shell. If you would like to make your system the " "root environment, run the command:\n" "\n" "\tchroot %s\n" "\n" "The system will reboot automatically when you exit from the shell." msgstr "" "ଆପଣଙ୍କ ତନ୍ତ୍ରକୁ %s ଅଧୀନରେ ମାଉଣ୍ଟ କରାଯାଇଛି।\n" "\n" "\tchroot %s\n" "ଆପଣ ଆବରଣରୁ ପ୍ରସ୍ଥାନ କଲେ ତନ୍ତ୍ରଟି ସ୍ବତଃପୁନର୍ଚାଳିତ ହୋଇଯିବ।" #: ../rescue.py:394 #, python-format msgid "" "An error occurred trying to mount some or all of your system. Some of it may " "be mounted under %s.\n" "\n" "Press to get a shell. The system will reboot automatically when you " "exit from the shell." msgstr "" "ଆପଣଙ୍କର କିଛି କିମ୍ବା ସବୁ ତନ୍ତ୍ର ମାନଙ୍କୁ ମାଉଣ୍ଟ କରିବାକୁ ପ୍ରଚେଷ୍ଟା କରିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିଲିଖିତ " "ହେଲା। ଏହା ମଧ୍ଯରୁ କିଛି ତନ୍ତ୍ରକୁ %s ଅଧୀନରେ ମାଉଣ୍ଟ କରାଯାଇପାରେ।\n" "\n" "ଗୋଟିଏ ଆବରଣକୁ ଯିବା ପାଇଁ ଦବାନ୍ତୁ। ଆପଣ ଆବରଣରୁ ପ୍ରସ୍ଥାନ କଲେ ତନ୍ତ୍ରଟି ସ୍ବତଃପୁନର୍ଚାଳିତ " "ହୋଇଯିବ।" #: ../rescue.py:403 msgid "Rescue Mode" msgstr "ଉଦ୍ଧାର ଧାରା" #: ../rescue.py:404 msgid "" "You don't have any Linux partitions. Press return to get a shell. The system " "will reboot automatically when you exit from the shell." msgstr "" "ଆପଣଙ୍କ ନିକଟରେ କୌଣସି Linux ବିଭାଜନ ନାହିଁ। ଗୋଟିଏ ଆବରଣକୁ ଯିବା ପାଇଁ ଗୋଟିଏ ପ୍ରତ୍ଯାବର୍ତ୍ତନ ବଟନକୁ " "ଦବାନ୍ତୁ। ଆପଣ ଆବରଣରୁ ବାହାରକୁ ଗଲେ ତନ୍ତ୍ରଟି ସ୍ବତଃ ପୁନର୍ଚାଳିତ ହେବ।" #: ../rescue.py:417 #, python-format msgid "Your system is mounted under the %s directory." msgstr "%s ଡିରେକ୍ଟୋରି ଅଧୀନରେ ଆପଣଙ୍କ ତନ୍ତ୍ରକୁ ମାଉଣ୍ଟ କରାଯାଇଛି।" #: ../text.py:206 ../text.py:290 ../text.py:303 tmp/exnSave.glade.h:7 msgid "Save" msgstr "ସଂରକ୍ଷଣ କରନ୍ତୁ" #: ../text.py:209 msgid "Save to local disk" msgstr "ସ୍ଥାନୀୟ ଡିସ୍କରେ ସଂରକ୍ଷଣ କରନ୍ତୁ" #: ../text.py:210 #, python-format msgid "Send to bugzilla (%s)" msgstr "ବଗଜିଲା (%s)କୁ ପଠାନ୍ତୁ" #: ../text.py:211 msgid "Send to remote server (scp)" msgstr "ସୁଦୂର ସର୍ଭର (scp)କୁ ପଠାନ୍ତୁ" #: ../text.py:225 ../text.py:238 msgid "User name" msgstr "ଚାଳକ ନାମ" #: ../text.py:227 ../text.py:240 msgid "Password" msgstr "ପ୍ରବେଶ ସଙ୍କେତ" #: ../text.py:229 msgid "Bug Description" msgstr "ତ୍ରୁଟି ବର୍ଣ୍ଣନା" #: ../text.py:242 msgid "Host (host:port)" msgstr "ଆଧାର (ଆଧାର:ସଂଯୋଗିକୀ)" #: ../text.py:244 msgid "Destination file" msgstr "ଲକ୍ଷ୍ଯ ସ୍ଥଳ ଫାଇଲ" #: ../text.py:323 msgid "Passphrase for encrypted device" msgstr "ସଂଗୁପ୍ତ ଉପକରଣ ପାଇଁ ପ୍ରବେଶ ସଂଦେଶ" #: ../text.py:336 msgid "Also add this passphrase to all existing encrypted devices" msgstr "ସମସ୍ତ ସ୍ଥିତବାନ ସଂଗୁପ୍ତ ଉପକରଣଗୁଡ଼ିକରେ ମଧ୍ଯ ଏହି ପ୍ରବେଶ ସଂକେତକୁ ଯୋଗ କରନ୍ତୁ" #: ../text.py:367 #, python-format msgid "The passphrase must be at least %d characters long." msgstr "ପ୍ରବେଶ ସଙ୍କେତଟି ଅତିକମରେ %d ଅକ୍ଷର ବିଶିଷ୍ଟ ହେବା ଉଚିତ।" #: ../text.py:397 tmp/lukspassphrase.glade.h:6 msgid "Passphrase" msgstr "ପ୍ରବେଶ ସଙ୍କେତ" #: ../text.py:405 tmp/lukspassphrase.glade.h:7 msgid "This is a global passphrase" msgstr "ଏହା ଗୋଟିଏ ଜାଗତିକ ପ୍ରବେଶ ସଙ୍କେତ ଅଟେ" #: ../text.py:471 ../text.py:475 msgid "Repository editing is not available in text mode." msgstr "ଅକ୍ଷରାବସ୍ଥାରେ ସଂଗ୍ରହାଳୟ ସମ୍ପାଦନ ସ୍ଥାପନ ଉପଲବ୍ଧ ନାହିଁ." #: ../text.py:513 #, python-format msgid "Please enter your %(instkey)s" msgstr "ଦୟାକରି ଆପଣଙ୍କ %(instkey)s କୁ ଭରଣ କରନ୍ତୁ" #: ../text.py:530 tmp/instkey.glade.h:6 #, no-c-format, python-format msgid "Skip entering %(instkey)s" msgstr "%(instkey)s ଭରଣ କରିବା ପ୍ରକ୍ରିୟାକୁ ଏଡାଇ ଦିଅନ୍ତୁ" #: ../text.py:606 ../loader/lang.c:63 ../loader/loader.c:212 #, c-format, python-format msgid "Welcome to %s for %s" msgstr "%s ପାଇଁ %s ରେ ଆପଣଙ୍କୁ ସ୍ବାଗତ କରାଯାଉଛି" #: ../text.py:608 #, python-format msgid "Welcome to %s" msgstr "%s କୁ ସ୍ବାଗତମ" #: ../text.py:610 msgid "" " / between elements | selects | next " "screen" msgstr " / swap | ଚୟନ | ପରବର୍ତ୍ତୀ ପରଦା ପ୍ରଦର୍ଶନ" #: ../text.py:732 msgid "Cancelled" msgstr "ବାତିଲ କରାଯାଇଛି" #: ../text.py:733 msgid "I can't go to the previous step from here. You will have to try again." msgstr "ମୁଁ ପୂର୍ବବର୍ତ୍ତୀ ପଦକ୍ଷେପକୁ ଏଠାରୁ ଯାଇ ପାରିବି ନାହିଁ। ଆପଣଙ୍କୁ ପୁନର୍ବାର ପ୍ରଚେଷ୍ଟା କରିବା ପାଇଁ ପଡିବ।" #: ../upgrade.py:91 ../upgrade.py:112 msgid "Proceed with upgrade?" msgstr "ଉନ୍ନୟନ ସହିତ ଆଗକୁ ବଢିବ କି?" #: ../upgrade.py:92 #, python-format msgid "" "You have choosen the upgrade for %s architecture, but the installed system " "is for %s architecture. \n" "\n" msgstr "" "ଆପଣ %s ସ୍ଥାପତ୍ୟ ପାଇଁ ଉନ୍ନୟନ ଚୟନ କରିସାରିଛନ୍ତି, କିନ୍ତୁ ସ୍ଥାପିତ ତନ୍ତ୍ରଟି %s ସ୍ଥାପତ୍ୟ ପାଇଁ। \n" "\n" #: ../upgrade.py:96 #, python-format msgid "Would you like to upgrade the installed system to the %s architecture?" msgstr "%s ସ୍ଥାପତ୍ୟରେ ଆପଣ ସ୍ଥାପିତ ତନ୍ତ୍ରକୁ ଉନ୍ନୟନ କରିବାକୁ ଚାହୁଁଛନ୍ତି କି?" #: ../upgrade.py:113 msgid "" "The file systems of the Linux installation you have chosen to upgrade have " "already been mounted. You cannot go back past this point. \n" "\n" msgstr "" "ଉନ୍ନୟନ କରିବା ପାଇଁ ଆପଣ ଚୟନ କରିଥିବା Linux ସ୍ଥାପନର ଫାଇଲ ତନ୍ତ୍ର ଗୁଡିକ ପୂର୍ବରୁ ଆରୋହିତ। ଆପଣ ଏହି " "ବିନ୍ଦୁରୁ ପଛକୁ ଯାଇ ପାରିବେ ନାହିଁ।\n" #: ../upgrade.py:117 msgid "Would you like to continue with the upgrade?" msgstr "ଆପଣ ଉନ୍ନୟନ ସହିତ ଆଗକୁ ବଢିବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି?" #: ../upgrade.py:215 ../upgrade.py:223 msgid "Dirty File Systems" msgstr "ଅପ୍ରୀତିକର ଫାଇଲ ତନ୍ତ୍ର" #: ../upgrade.py:216 #, python-format msgid "" "The following file systems for your Linux system were not unmounted " "cleanly. Please boot your Linux installation, let the file systems be " "checked and shut down cleanly to upgrade.\n" "%s" msgstr "" "ଆପଣଙ୍କ Linux ତନ୍ତ୍ର ପାଇଁ ନିମ୍ନଲିଖିତ ଫାଇଲତନ୍ତ୍ର ଗୁଡିକ ସମ୍ପୂର୍ଣ୍ଣ ରୂପରେ ଆନାରୋହିତ କରାଯାଇଛି। ଦୟାକରି " "ଆପଣଙ୍କର Linux ସ୍ଥାପନ ପ୍ରକ୍ରିୟାକୁ ବୁଟ କରନ୍ତୁ, ଫାଇଲ ତନ୍ତ୍ରକୁ ଯାଞ୍ଚ କରାଯିବା ପାଇଁ ଦିଅନ୍ତୁ ଏବଂ %s କୁ " "ଉନ୍ନଯନ କରିବା ପାଇଁ \n" "ବନ୍ଦ କରନ୍ତୁ" #: ../upgrade.py:224 #, python-format msgid "" "The following file systems for your Linux system were not unmounted " "cleanly. Would you like to mount them anyway?\n" "%s" msgstr "" "ଆପଣଙ୍କ Linux ତନ୍ତ୍ର ପାଇଁ ନିମ୍ନଲିଖିତ ଫାଇଲତନ୍ତ୍ର ଗୁଡିକ ସମ୍ପୂର୍ଣ୍ଣ ରୂପରେ ଆନାରୋହିତ କରାଯାଇଛି। ଆପଣ " "ତଥାପି ସେମାନଙ୍କୁ ମାଉଣ୍ଟ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି?\n" "%s" #: ../upgrade.py:365 ../upgrade.py:371 msgid "Mount failed" msgstr "ମାଉଣ୍ଟ ବିଫଳ" #: ../upgrade.py:366 msgid "" "One or more of the file systems listed in the /etc/fstab on your Linux " "system cannot be mounted. Please fix this problem and try to upgrade again." msgstr "" "ଆପଣଙ୍କ Linux ତନ୍ତ୍ରର /etc/fstab ରେ ସୂଚୀବଦ୍ଧ ଥିବା ଏକ କିମ୍ବା ତତ୍ଯାଧିକ ଫାଇଲ ତନ୍ତ୍ର ମାନଙ୍କୁ " "ଆରୋହିତ କରିପାରିବ ନାହିଁ। ଦୟାକରି ଏହି ସମସ୍ଯାକୁ ସମାଧାନ କରନ୍ତୁ ଏବଂ ଏହାକୁ ଉନ୍ନୟନ କରିବା ପାଇଁ ପୁରର୍ବାର " "ପ୍ରଚେଷ୍ଟା କରନ୍ତୁ।" #: ../upgrade.py:372 msgid "" "One or more of the file systems listed in the /etc/fstab of your Linux " "system are inconsistent and cannot be mounted. Please fix this problem and " "try to upgrade again." msgstr "" "ଆପଣଙ୍କ Linux ତନ୍ତ୍ରର /etc/fstab ରେ ସୂଚୀବଦ୍ଧ ଥିବା ଏକ କିମ୍ବା ତତ୍ଯାଧିକ ଫାଇଲ ତନ୍ତ୍ର ଗୁଡିକ " "ଅସମଞ୍ଜସ୍ଯ ଅବସ୍ଥାରେ ଅଛନ୍ତି ଏବଂ ସେମାନଙ୍କୁ ମାଉଣ୍ଟ କରିହେବରିବ ନାହିଁ। ଦୟାକରି ଏହି ସମସ୍ଯାୁ ସମାଧାନ " "କରନ୍ତୁ ଏବଂ ଏହାକୁ ଉନ୍ନୟନ କରିବା ପାଇଁ ପୁରର୍ବାର ପ୍ରଚେଷ୍ଟା କରନ୍ତୁ।" #: ../upgrade.py:389 msgid "" "The following files are absolute symbolic links, which we do not support " "during an upgrade. Please change them to relative symbolic links and restart " "the upgrade.\n" "\n" msgstr "" "ନିମ୍ନଲିଖିତ ଫାଇଲ ଗୁଡିକ ବାସ୍ତବ ପ୍ରତୀକାତ୍ମକ ସମ୍ପର୍କ ଅଟନ୍ତି, ଯାହା ଗୋଟିଏ ଉନ୍ନୟନ ସମୟରେ ସମର୍ଥିତ " "ନୁହଁନ୍ତି। ସେମାନଙ୍କୁ ଆପେକ୍ଷିକ ପ୍ରତୀକାତ୍ମକ ସମ୍ପର୍କକୁ ପରିବର୍ତ୍ତନ କରନ୍ତୁ ଏବଂ ଉନ୍ନୟନ ପୁନଃପ୍ରାରମ୍ଭ " "କରନ୍ତୁ।\n" "\n" #: ../upgrade.py:395 msgid "Absolute Symlinks" msgstr "ପ୍ରକୃତ ପୂର୍ବସମ୍ପର୍କ" #: ../upgrade.py:406 msgid "" "The following are directories which should instead be symbolic links, which " "will cause problems with the upgrade. Please return them to their original " "state as symbolic links and restart the upgrade.\n" "\n" msgstr "" "ନିମ୍ନଲିଖିତ ବସ୍ତୁ ଗୁଡିକ ଡିରେକ୍ଟୋରି ଅଟନ୍ତି ଯାହାକି ପ୍ରତୀକାତ୍ମକ ସମ୍ପର୍କ ହେବା ଉଚିତ ଥିଲା, ଏହା ଉନ୍ନୟନ " "ସମୟରେ ସମସ୍ଯା ସୃଷ୍ଟି କରିପାରେ। ଦୟାକରି ସେଗୁଡିକୁ ପ୍ରତୀକାତ୍ମକ ସମ୍ପର୍କ ଭାବରେ ସେମାନଙ୍କ ମୂଳ ଅବସ୍ଥାକୁ " "ପ୍ରତ୍ଯାବୃତ କରନ୍ତୁ ଏବଂ ଉନ୍ନୟନ ପ୍ରକ୍ରିୟାକୁ ପୁନଃପ୍ରାରମ୍ଭ କରନ୍ତୁ।\n" "\n" #: ../upgrade.py:412 msgid "Invalid Directories" msgstr "ଅବୈଧ ଡିରେକ୍ଟୋରି" #: ../upgrade.py:419 #, python-format msgid "%s not found" msgstr "%s ମିଳିଲା ନାହିଁ" #: ../vnc.py:152 #, python-format msgid "%s %s installation on host %s" msgstr "%s %s %s ଆଧାର ରେ ସ୍ଥାପିତ ହେଉ ଅଛି" #: ../vnc.py:154 #, python-format msgid "%s %s installation" msgstr "%s %s ସ୍ଥାପନ" #: ../vnc.py:181 #, python-format msgid "Attempting to connect to vnc client on host %s..." msgstr "vnc ଗ୍ରାହକ ସହିତ %s ଆଧାର ରେ ସଂଯୋଗ କରିବା ପାଇଁ ପ୍ରଚେଷ୍ଟା କରୁଛି" #: ../vnc.py:195 msgid "Connected!" msgstr "ସଂଯୋଗ ହୋଇଗଲା" #: ../vnc.py:198 msgid "Will try to connect again in 15 seconds..." msgstr "୧୫ ସେକେଣ୍ଡ ମଦ୍ଧ୍ଯ ରେ ପୂର୍ନବାର ସଂଯୋଗ କରିବା ପାଇଁ ପ୍ରଚେଷ୍ଟା କରିବ" #: ../vnc.py:204 #, python-format msgid "Giving up attempting to connect after %d tries!\n" msgstr "%d ଥର ଚେଷ୍ଟାକରିବା ପରେ ସଂଯୋଗ କରିବା ପ୍ରଚେଷ୍ଟାକୁ ପରିତ୍ଯାଗ କରିଛି!\n" #: ../vnc.py:213 #, python-format msgid "Please manually connect your vnc client to %s to begin the install." msgstr "ସ୍ଥାପନ ପ୍ରକ୍ରିୟାକୁ ଆରମ୍ଭ କରିବା ପାଇଁ ଦୟାକରି vnc ଗ୍ରାହକ କୁ %s ସହିତ ନିଜ ହାତ ରେ ସଂଯୋଗ କରନ୍ତୁ" #: ../vnc.py:215 msgid "Please manually connect your vnc client to begin the install." msgstr "ସ୍ଥାପନ ପ୍ରକ୍ରିୟାକୁ ଆରମ୍ଭ କରିବା ପାଇଁ ଦୟାକରି vnc ଗ୍ରାହକ କୁ ନିଜ ହାତ ରେ ସଂଯୋଗ କରନ୍ତୁ" #: ../vnc.py:218 msgid "Starting VNC..." msgstr "VNC ଆରମ୍ଭ କରୁଛି" #: ../vnc.py:243 msgid "The VNC server is now running." msgstr "VNC ସେବକ ଟି ବର୍ତ୍ତମାନ ଚାଲିଛି" #: ../vnc.py:256 msgid "" "\n" "\n" "You chose to connect to a listening vncviewer. \n" "This does not require a password to be set. If you \n" "set a password, it will be used in case the connection \n" "to the vncviewer is unsuccessful\n" "\n" msgstr "" "\n" "\n" "ଆପଣ ଗୋଟିଏ ଶ୍ରବଣୀୟ vnc ପ୍ରଦର୍ଶକ ସହିତ ସଂଯୋଗ ହେବାପାଇଁ ଚୟନ କରିଛନ୍ତି। \n" "ଏହା ପ୍ରବେଶ ସଂକେତ ସେଟ କରିବା ଆବଶ୍ୟକ କରେ ନାହିଁ। ଯଦି ଆପଣ \n" "ପ୍ରବେଶ ସଂକେତ ସେଟ କରନ୍ତି, ତେବେ ଏହା vnc ପ୍ରଦର୍ଶକ ସହିତ ସଂଯୋଗ ସ୍ଥାପନ \n" "ବିଫଳ ହେଲାପରେ ବ୍ୟବହୃତ ହେବ \n" "\n" #: ../vnc.py:261 msgid "" "\n" "\n" "WARNING!!! VNC server running with NO PASSWORD!\n" "You can use the vncpassword= boot option\n" "if you would like to secure the server.\n" "\n" msgstr "" "\n" "\n" "ଚେତାବନୀ!!! VNC ସର୍ଭରଟି ବିନା ପ୍ରବେଶ ସଙ୍କେତ ରେ ଚାଲିଛି!\n" "ଆପଣ vncpassword= ବୁଟ୍ ବିକଳ୍ପକୁ ବ୍ଯବହାର କରି ପାରିବେ\n" "ଯଦି ଆପଣ ସର୍ଭରକୁ ସୁରକ୍ଷିତ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି\n" "\n" #: ../vnc.py:265 msgid "" "\n" "\n" "You chose to execute vnc with a password. \n" "\n" msgstr "" "\n" "\n" "ଆପଣ vnc କୁ ଗୋଟିଏ ପ୍ରବେଶ ସଂକେତ ସହିତ ନିଷ୍ପାଦନ କରିବାକୁ ପସନ୍ଦ କରିଛନ୍ତି। \n" "\n" #: ../vnc.py:267 msgid "" "\n" "\n" "Unknown Error. Aborting. \n" "\n" msgstr "" "\n" "\n" "ଅଜଣା ତୃଟି। ପରିତ୍ୟାଗ କରୁଅଛି। \n" "\n" #: ../vnc.py:289 ../vnc.py:382 msgid "VNC Configuration" msgstr "VNC ବିନ୍ଯାସ" #: ../vnc.py:292 ../vnc.py:386 msgid "No password" msgstr "କୌଣସି ପ୍ରବେଶ ସଙ୍କେତ ନାହିଁ" #: ../vnc.py:294 ../vnc.py:389 msgid "" "A password will prevent unauthorized listeners connecting and monitoring " "your installation progress. Please enter a password to be used for the " "installation" msgstr "" "ଗୋଟିଏ ପ୍ରବେଶ ସଙ୍କେତ ଅବୈଧିକୃତ ଶ୍ରୋତା ମାନଙ୍କୁ ଆପଣଙ୍କ ସ୍ଥାପନ ପ୍ରକ୍ରିୟା ସହିତ ସଂଯୋଗ କରିବା କିମ୍ବା " "ତା'ଉପରେ ଦୃଷ୍ଟି ରଖିବାରୁ ନିଷେଧ କରିଥାଏ। ଦୟାକରି ସ୍ଥାପନ ପ୍ରକ୍ରିୟାରେ ବ୍ଯବହାର କରିବା ପାଇଁ ଗୋଟିଏ " "ପ୍ରବେଶ ସଙ୍କେତ ଭରଣ କରନ୍ତୁ।" #: ../vnc.py:302 ../vnc.py:397 ../textw/userauth_text.py:47 msgid "Password:" msgstr "ପ୍ରବେଶ ସଙ୍କେତ:" #: ../vnc.py:303 ../vnc.py:398 ../textw/userauth_text.py:49 msgid "Password (confirm):" msgstr "ପ୍ରବେଶ ସଙ୍କେତ (ନିଶ୍ଚିତ କରନ୍ତୁ):" #: ../vnc.py:321 ../vnc.py:420 ../textw/userauth_text.py:70 msgid "Password Mismatch" msgstr "ପ୍ରବେଶ ସଙ୍କେତ ମିଶୁନାହିଁ" #: ../vnc.py:322 ../vnc.py:421 ../textw/userauth_text.py:71 msgid "The passwords you entered were different. Please try again." msgstr "ଆପଣ ଭରଣ କରିଥିବା ପ୍ରବେଶ ସଙ୍କେତଟି ଭିନ୍ନ ଅଟେ। ଦୟାକରି ପୁନର୍ବାର ପ୍ରଚେଷ୍ଟା କରନ୍ତୁ।" #: ../vnc.py:327 ../vnc.py:426 ../textw/userauth_text.py:66 msgid "Password Length" msgstr "ପ୍ରବେଶ ସଙ୍କେତ ଦୈର୍ଘ୍ଯ" #: ../vnc.py:328 ../vnc.py:427 msgid "The password must be at least six characters long." msgstr "ପ୍ରବେଶ ସଙ୍କେତଟି ଅତିକମରେ ୬ ଅକ୍ଷର ବିଶିଷ୍ଟ ହେବା ଉଚିତ।" #: ../vnc.py:350 msgid "Unable to Start X" msgstr "X କୁ ପ୍ରାରମ୍ଭ କରିବାରେ ଅସମର୍ଥ" #: ../vnc.py:352 msgid "" "X was unable to start on your machine. Would you like to start VNC to " "connect to this computer from another computer and perform a graphical " "install or continue with a text mode install?" msgstr "" "X ଆପଣଙ୍କ ତନ୍ତ୍ରକୁ ପ୍ରାରମ୍ଭ କରିବାରେ ଅସମର୍ଥ ହେଲା। ଆପଣ ଅନ୍ଯ ଗୋଟିଏ କମ୍ପୁଟରରୁ ଏହି କମ୍ପୁଟରକୁ ସଂଯୋଗ " "କରିବା ପାଇଁ VNC ପ୍ରାରମ୍ଭ କରି ଗୋଟିଏ ଆଲେଖୀକ ଅନ୍ତରାପୃଷ୍ଠରେ ସ୍ଥାପନ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି କିମ୍ବା " "ଗୋଟିଏ ପାଠ୍ଯ ଧାରାରେ ସ୍ଥାପନ ପ୍ରକ୍ରିୟା ଜାରି ରଖିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../vnc.py:371 ../vnc.py:374 msgid "Use text mode" msgstr "ପାଠ୍ଯ ଧାରାକୁ ବ୍ଯବହାର କରନ୍ତୁ" #: ../vnc.py:372 msgid "Start VNC" msgstr "VNC କୁ ପ୍ରାରମ୍ଭ କରନ୍ତୁ" #: ../yuminstall.py:76 #, python-format msgid "%s MB" msgstr "%s ମେଗା-ବାଇଟ୍" #: ../yuminstall.py:79 #, python-format msgid "%s KB" msgstr "%s କିଲୋ-ବାଇଟ୍" #: ../yuminstall.py:82 #, python-format msgid "%s Byte" msgstr "%s ବାଇଟ୍" #: ../yuminstall.py:84 #, python-format msgid "%s Bytes" msgstr "%s ବାଇଟ୍ସ" #: ../yuminstall.py:126 msgid "Processing" msgstr "ପ୍ରକ୍ରିୟା" #: ../yuminstall.py:127 msgid "Preparing transaction from installation source..." msgstr "ସ୍ଥାପନ ଉତ୍ସରୁ ବିନିମୟ ପାଇଁ ପ୍ରସ୍ତୁତ କରୁଅଛି..." #: ../yuminstall.py:158 #, python-format msgid "Installing %s (%s)\n" msgstr "%s କୁ ସ୍ଥାପନ କରୁଅଛି (%s)\n" #: ../yuminstall.py:209 #, python-format msgid "%s of %s packages completed" msgstr "%s ପ୍ୟାକେଜ %s ପ୍ଯାକେଜ ମାନଙ୍କ ମଧ୍ଯରୁ ସମ୍ପୂର୍ଣ୍ଣ" #: ../yuminstall.py:219 msgid "Finishing upgrade" msgstr "ଉନ୍ନୟନ ପ୍ରକ୍ରିୟା ସମାପ୍ତ କରୁଅଛି" #: ../yuminstall.py:220 msgid "Finishing upgrade process. This may take a little while..." msgstr "ଉନ୍ନୟନ ପ୍ରକ୍ରିୟାକୁ ସମାପ୍ତ କରୁଅଛି. ଏହା କିଛି ସମୟ ନେଇପାରେ..." #: ../yuminstall.py:290 ../iw/task_gui.py:283 msgid "Error Setting Up Repository" msgstr "ସଂଗ୍ରହାଳୟକୁ ବିନ୍ୟାସ କରିବାରେ ତ୍ରୁଟି" #: ../yuminstall.py:291 ../iw/task_gui.py:284 #, python-format msgid "" "The following error occurred while setting up the installation repository:\n" "\n" "%s\n" "\n" "Please provide the correct information for installing %s." msgstr "" "ସ୍ଥାପତ୍ୟ ସଂଗ୍ରହାଳୟକୁ ବିନ୍ୟାସ କରିବା ସମୟରେ ନିମ୍ନଲିଖିତ ତ୍ରୁଟି ପରିଲକ୍ଷିତ ହେଲା:\n" "\n" "%s\n" "\n" "ଦୟାକରି ସ୍ଥାପନ କରିବା ପାଇଁ ସଠିକ ସୂଚନା ପ୍ରଦାନ କରନ୍ତୁ %s." #: ../yuminstall.py:348 msgid "Change Disc" msgstr "ଡିସ୍କ ପରିବର୍ତ୍ତନ କରନ୍ତୁ" #: ../yuminstall.py:349 #, python-format msgid "Please insert %s disc %d to continue." msgstr "ଆଗକୁ ବଢିବା ପାଇଁ ଦୟାକରି %s ଡିସ୍କ %d କୁ ଭର୍ତ୍ତି କରନ୍ତୁ।" #: ../yuminstall.py:360 msgid "Wrong Disc" msgstr "ଭୂଲ ଡିସ୍କ" #: ../yuminstall.py:361 #, python-format msgid "That's not the correct %s disc." msgstr "ତାହା ସଠିକ %s ଡିସ୍କ ନୁହେଁ।" #: ../yuminstall.py:367 msgid "Unable to access the disc." msgstr "ଡିସ୍କକୁ ଅଭିଗମ କରିବାରେ ଅସମର୍ଥ।" #: ../yuminstall.py:515 #, python-format msgid "Repository %r is missing name in configuration, using id" msgstr "ପରିଚୟ ବ୍ୟବହାର କରି, ବିନ୍ୟାସରେ ସଂଗ୍ରହାଳୟ %r ର ନାମ ନାହିଁ" #: ../yuminstall.py:634 ../yuminstall.py:636 msgid "Re_boot" msgstr "ପୁନର୍ଚାଳନ କରନ୍ତୁ (_b)" #: ../yuminstall.py:634 msgid "_Eject" msgstr "ବାହାର କରନ୍ତୁ (_E)" #: ../yuminstall.py:643 #, python-format msgid "" "The file %s cannot be opened. This is due to a missing file, a corrupt " "package or corrupt media. Please verify your installation source.\n" "\n" "If you exit, your system will be left in an inconsistent state that will " "likely require reinstallation.\n" "\n" msgstr "" "%s ଫାଇଲକୁ ଖୋଲିହେବ ନାହିଁ। ଏହା ସମ୍ଭବତଃ ଗୋଟିଏ ଅନୁପସ୍ଥିତ ଫାଇଲ, ଗୋଟିଏ ତୃଟିଯୁକ୍ତ ପ୍ଯାକେଜ କିମ୍ବା " "ତୃଟିଯୁକ୍ତ ସଞ୍ଚାର ମାଧ୍ଯମ ଯୋଗୁଁ ହୋଇଅଛି। ଦୟାକରି ଆପଣଙ୍କର ସ୍ଥାପନ ଉତ୍ସକୁ ଯାଞ୍ଚ କରନ୍ତୁ।\n" "\n" "ଯଦି ଆପଣ ପ୍ରସ୍ଥାନ କରନ୍ତି, ଆପଣଙ୍କ ତନ୍ତ୍ର ଗୋଟିଏ ଅପ୍ରିତୀକର ଅବସ୍ଥାକୁ ଚାଲିଯିବ ଯେଉଁଥି ପାଇଁ ଆପଣଙ୍କୁ ପୁନଃ " "ସ୍ଥାପନ କରିବାକୁ ପଡିବ।\n" "\n" #: ../yuminstall.py:683 msgid "Retrying" msgstr "ପୁନଃ ପ୍ରଚେଷ୍ଟା କରୁଅଛି" #: ../yuminstall.py:683 msgid "Retrying download..." msgstr "ଆହରଣ ପାଇଁ ପୁନଃ ପ୍ରଚେଷ୍ଟା କରୁଅଛି..." #: ../yuminstall.py:755 #, python-format msgid "There was an error running your transaction for the following reason: %s\n" msgstr "ନିମ୍ନଲିଖିତ କାରଣ ଯୋଗୁଁ ଆପଣଙ୍କ ତଥ୍ଯ ବିନିମୟ ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିଲକ୍ଷିତ ହେଲା: %s\n" #: ../yuminstall.py:790 ../yuminstall.py:791 msgid "file conflicts" msgstr "ଫାଇଲ ବିରୋଧ" #: ../yuminstall.py:792 msgid "older package(s)" msgstr "ପୁରୁଣା ପ୍ଯାକେଜ(ମାନ)" #: ../yuminstall.py:793 msgid "insufficient disk space" msgstr "ପର୍ଯ୍ଯାପ୍ତ ଡିସ୍କ ସ୍ଥାନ ନାହିଁ" #: ../yuminstall.py:794 msgid "insufficient disk inodes" msgstr "ପର୍ଯ୍ଯାପ୍ତ ଡିସ୍କ ଆଇ.ନୋଡ୍ସ ନାହିଁ" #: ../yuminstall.py:795 msgid "package conflicts" msgstr "ପ୍ଯାକେଜ ବିରୋଧ" #: ../yuminstall.py:796 msgid "package already installed" msgstr "ପ୍ଯାକେଜ ଟି ପୂର୍ବରୁ ସ୍ଥାପିତ ହୋଇ ସାରିଛି" #: ../yuminstall.py:797 msgid "required package" msgstr "ଜରୂରୀ ପ୍ଯାକେଜ" #: ../yuminstall.py:798 msgid "package for incorrect arch" msgstr "ଭୂଲ ସ୍ଥାପତ୍ଯ ପାଇଁ ପ୍ଯାକେଜ" #: ../yuminstall.py:799 msgid "package for incorrect os" msgstr "ଭୂଲ ପ୍ରଚାଳନ ତନ୍ତ୍ର ପାଇଁ ପ୍ଯାକେଜ" #: ../yuminstall.py:813 msgid "You need more space on the following file systems:\n" msgstr "ନିମ୍ନଲିଖିତ ଫାଇଲ ତନ୍ତ୍ର ରେ ଆପଣ ଅଧିକ ସ୍ଥାନ ଆବଶ୍ୟକ କରିବେ:\n" #: ../yuminstall.py:826 #, python-format msgid "" "There were file conflicts when checking the packages to be installed:\n" "%s\n" msgstr "" "ସ୍ଥାପନ କରାଯିବା ପ୍ଯାକେଜ ମାନଙ୍କୁ ଯାଞ୍ଚ କରାଯିବା ସମୟରେ ଫାଇଲ ମତାନୈକ୍ୟ ହେଉଛି:\n" "%s\n" #: ../yuminstall.py:829 #, python-format msgid "" "There was an error running your transaction for the following reason(s): %" "s.\n" msgstr "ନିମ୍ନଲିଖିତ କାରଣ(ଗୁଡିକ) ପାଇଁ ଆପଣଙ୍କ ତଥ୍ଯ ବିନିମୟ ଚାଲିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିଲକ୍ଷିତ ହେଲା: %s s.\n" #: ../yuminstall.py:839 ../yuminstall.py:844 msgid "Error Running Transaction" msgstr "ବିନିମୟ ଚାଲୁଥିବା ସମୟରେ ତୃଟି" #: ../yuminstall.py:992 msgid "" "Unable to read group information from repositories. This is a problem with " "the generation of your install tree." msgstr "" "ଭଣ୍ଡାରରୁ ସମୂହ ସୂଚନା ପଢିବାରେ ଅସମର୍ଥ। ଏହା ଆପଣଙ୍କ ସ୍ଥାପନ ବୃକ୍ଷର ଉତ୍ପତ୍ତ ସମୟରେ ଗୋଟିଏ ସମସ୍ଯା " "ଅଟେ।" #: ../yuminstall.py:1030 msgid "Retrieving installation information..." msgstr "ସ୍ଥାପନ ସୂଚନା କୁ ପୁନରୁଦ୍ଧାର କରୁଅଛି..." #: ../yuminstall.py:1032 #, python-format msgid "Retrieving installation information for %s..." msgstr "%s ପାଇଁ ସ୍ଥାପନ ସୂଚନା କୁ ପୁନରୁଦ୍ଧାର କରୁଅଛି..." #: ../yuminstall.py:1034 msgid "Installation Progress" msgstr "ସ୍ଥାପନ ପ୍ରକ୍ରିୟା" #: ../yuminstall.py:1047 ../textw/bootloader_text.py:277 #: ../textw/constants_text.py:64 ../textw/partition_text.py:1429 msgid "Edit" msgstr "ଅଦ୍ଯତନ କରନ୍ତୁ" #: ../yuminstall.py:1060 ../yuminstall.py:1289 #, python-format msgid "" "Unable to read package metadata. This may be due to a missing repodata " "directory. Please ensure that your install tree has been correctly " "generated.\n" "\n" "%s" msgstr "" "ପ୍ଯାକେଜ ଅଧିତଥ୍ଯକୁ ପଢିବାରେ ଅସମର୍ଥ। ଏହା ଗୋଟିଏ ଅନୁପସ୍ଥିତ repodata ଡିରେକ୍ଟୋରି ପାଇଁ ହୋଇଥାଏ " "ପାରେ। ଦୟାକରି ଏହା ନିଶ୍ଚିତ କରନ୍ତୁ ଯେ ଆପଣଙ୍କ ସ୍ଥାପନ ବୃକ୍ଷଟି ସଠିକ ଭାବରେ ସୃଷ୍ଟି କରାଯାଇଛି।\n" "\n" "%s" #: ../yuminstall.py:1111 ../iw/GroupSelector.py:503 msgid "Uncategorized" msgstr "ଅବର୍ଗୀକ୍ରୁତ" #: ../yuminstall.py:1312 #, python-format msgid "" "Your selected packages require %d MB of free space for installation, but you " "do not have enough available. You can change your selections or exit the " "installer." msgstr "" "ଆପଣଙ୍କ ଦ୍ବାରା ଚୟିତ ପ୍ଯାକେଜଟି ସ୍ଥାପନ ପାଇଁ %d ମେଗା-ବାଇଟ ଖାଲି ସ୍ଥାନ ଆବଶ୍ୟକ କରେ, କିନ୍ତୁ ଆପଣଙ୍କ " "ନିକଟରେ ଯଥେଷ୍ଟ ସ୍ଥାନ ନାହିଁ। ଆପଣ ଆପଣଙ୍କର ଚୟନକୁ ବଦଳାଇ ପାରିବେ କିମ୍ବା ବନ୍ଦ କରିପାରିବେ।" #: ../yuminstall.py:1331 msgid "Reboot?" msgstr "ପୁନର୍ଚାଳନ କରିବ କି?" #: ../yuminstall.py:1332 msgid "The system will be rebooted now." msgstr "ତନ୍ତ୍ର ଟି ବର୍ତମାନ ପୁନର୍ଚାଳିତ ହେବ।" #: ../yuminstall.py:1494 #, python-format msgid "" "You appear to be upgrading from a system which is too old to upgrade to this " "version of %s. Are you sure you wish to continue the upgrade process?" msgstr "" "ଆପଣ ଗୋଟିଏ ଏପରି ତନ୍ତ୍ରରୁ ଉନ୍ନୟନ କରୁଥିବା ପରି ଦୃଶ୍ଯମାନ ହେଉଛନ୍ତି ଯାହାକି %s ତନ୍ତ୍ରକୁ ଉନ୍ନୟନ କରିବା " "ପାଇଁ ଖୁବ ପୁରୁଣା ଅଟେ। ଆପଣ ନିଶ୍ଚିତ କି ଆପଣ ଏହି ଉନ୍ନୟନ ପ୍ରକ୍ରିୟାକୁ ଜାରି ରଖିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../yuminstall.py:1521 #, python-format msgid "" "The arch of the release of %s you are upgrading to appears to be %s which " "does not match your previously installed arch of %s. This is likely to not " "succeed. Are you sure you wish to continue the upgrade process?" msgstr "" "ଆପଣ ଉନ୍ନୟନ କରୁଥିବା %s ପ୍ରକାଶନର ମୁଖ୍ୟାଂଶ %s ପରି ଦୃଶ୍ଯମାନ ଯାହା ଆପଣଙ୍କର %s ର ପୂର୍ବ ସ୍ଥାପିତ " "ମୁଖ୍ୟାଂଶ ସହିତ ମେଳ ଖାଉନାହିଁ. ଏହା ସଫଳ ହୋଇ ନପାରେ। ଆପଣ ନିଶ୍ଚିତ କି ଆପଣ ଏହି ଉନ୍ନୟନ ପ୍ରକ୍ରିୟାକୁ " "ଜାରି ରଖିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../yuminstall.py:1571 msgid "Post Upgrade" msgstr "ପଶ୍ଚାତ ଉନ୍ନୟନ" #: ../yuminstall.py:1572 msgid "Performing post upgrade configuration..." msgstr "ଉନ୍ନୟନ ପରବର୍ତ୍ତୀ ବିନ୍ଯାସ କୁ ପରିବେଷଣ କରୁଅଛି..." #: ../yuminstall.py:1574 msgid "Post Install" msgstr "ପଶ୍ଚାତ୍ ସ୍ଥାପନ" #: ../yuminstall.py:1575 msgid "Performing post install configuration..." msgstr "ସ୍ଥାପନ ପରବର୍ତ୍ତୀ ବିନ୍ଯାସକୁ ପରିବେଷଣ କରୁଅଛି..." #: ../yuminstall.py:1799 msgid "Install Starting" msgstr "ସ୍ଥାପନ ପ୍ରକ୍ରିୟାକୁ ପ୍ରାରମ୍ଭ କରୁଅଛି" #: ../yuminstall.py:1800 msgid "Starting install process. This may take several minutes..." msgstr "ସ୍ଥାପନ ପ୍ରକ୍ରିୟାକୁ ପ୍ରାରମ୍ଭ କରୁଅଛି। ଏହି କିଛି ସମୟ ନେଇପାରେ..." #: ../yuminstall.py:1838 msgid "Dependency Check" msgstr "ନିର୍ଭରକ ଯାଞ୍ଚ" #: ../yuminstall.py:1839 msgid "Checking dependencies in packages selected for installation..." msgstr "ସ୍ଥାପନ ପାଇଁ ଚୟିତ ହୋଇଥିବା ପ୍ଯାକେଜ ମାନଙ୍କରେ ନିର୍ଭରକ ମାନଙ୍କୁ ଯାଞ୍ଚ କରୁଅଛି..." #: ../zfcp.py:52 msgid "You have not specified a device number or the number is invalid" msgstr "ଆପଣ ଗୋଟିଏ ଉପକରଣର ନମ୍ବର ଅଲ୍ଲେଖ କରି ନାହାଁନ୍ତି କିମ୍ବା ନମ୍ବର ଟି ଅବୈଧ ଅଟେ।" #: ../zfcp.py:54 msgid "You have not specified a worldwide port name or the name is invalid." msgstr "ଆପଣ ଗୋଟିଏ ବୈଷୟିକ ସଂଯୋଗିକୀ ନମ୍ବର କୁ ଉଲ୍ଲେଖ କରି ନାହାଁନ୍ତି କିମ୍ବା ନମ୍ବରଟି ଅବୈଧ ଅଟେ।" #: ../zfcp.py:56 msgid "You have not specified a FCP LUN or the number is invalid." msgstr "ଆପଣ ଗୋଟିଏ FCP LUN କୁ ଉଲ୍ଲେଖ କରି ନାହାଁନ୍ତି କିମ୍ବା ନମ୍ବର ଟି ଅବୈଧ ଅଟେ।" #: ../iw/GroupSelector.py:165 #, python-format msgid "Packages in %s" msgstr "%s ରେ ଥିବା ପ୍ଯାକେଜ ମାନ" #: ../iw/GroupSelector.py:442 #, python-format msgid "Optional packages selected: %d of %d" msgstr "ଇଚ୍ଛାଧୀନ ପ୍ଯାକେଜଗୁଡ଼ିକୁ ଚୟନ କରାଯାଇଛି : %d ର %d" #: ../iw/GroupSelector.py:443 #, python-format msgid "%s" msgstr "%s" #: ../iw/account_gui.py:52 msgid "Root _Password:" msgstr "ପ୍ରମୂଖ ଚାଳକ ର ପ୍ରବେଶ ସଙ୍କେତ (_P):" #: ../iw/account_gui.py:54 msgid "_Confirm:" msgstr "ନିଶ୍ଚିତ କରନ୍ତୁ (_C):" #: ../iw/account_gui.py:97 msgid "Caps Lock is on." msgstr "Caps Lock ଅନ ଅଛି।" #: ../iw/account_gui.py:107 ../iw/account_gui.py:115 ../iw/account_gui.py:122 #: ../iw/account_gui.py:143 ../textw/userauth_text.py:74 msgid "Error with Password" msgstr "ପ୍ରବେଶ ସଙ୍କେତ ଜନିତ ତୃଟି" #: ../iw/account_gui.py:108 msgid "" "You must enter your root password and confirm it by typing it a second time " "to continue." msgstr "" "ଆପଣ ପ୍ରମୂଖ ଚାଳକ ପାଇଁ ଗୋଟିଏ ପ୍ରବେଶ ସଙ୍କେତ କୁ ଭରଣ କରିବା ଉଚିତ ଏବଂ ଆଗକୁ ବଢିବା ପାଇଁ ଦ୍ବିତୀୟ ଥର " "ତାହାକୁ ଟାଇପ କରି ନିଶ୍ଚିତ କରନ୍ତୁ।" #: ../iw/account_gui.py:116 msgid "The passwords you entered were different. Please try again." msgstr "ଆପଣ ଭରଣ କରିଥିବା ପ୍ରବେଶ ସଙ୍କେତ ଗୁଡିକ ଅଲଗା ଅଟନ୍ତି। ଦୟାକରି ପୁନର୍ବାର ପ୍ରଚେଷ୍ଟା କରନ୍ତୁ।" #: ../iw/account_gui.py:123 msgid "The root password must be at least six characters long." msgstr "ପ୍ରମୂଖ ଚାଳକ ର ପ୍ରବେଶ ସଙ୍କେତ ଟି ଅତିକମ ରେ ୬ଟି ଅକ୍ଷର ବିଶିଷ୍ଟ ହେବା ଉଚିତ।" #: ../iw/account_gui.py:131 ../textw/userauth_text.py:81 msgid "Weak Password" msgstr "ଦୁର୍ବଳ ପ୍ରବେଶ ସଙ୍କେତ" #: ../iw/account_gui.py:132 ../textw/userauth_text.py:82 #, python-format msgid "" "Weak password provided: %s\n" "\n" "Would you like to continue with this password?" msgstr "" "ଦୁର୍ବଳ ପ୍ରବେଶ ସଙ୍କେତ ପ୍ରଦାନକାରୀ: %s\n" "\n" "ଆପଣ ଏହି ପ୍ରବେଶ ସଙ୍କେତ ନ ସହିତ ଆଗକୁ ବଢିବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି?" #: ../iw/account_gui.py:144 ../textw/userauth_text.py:75 msgid "Requested password contains non-ASCII characters, which are not allowed." msgstr "" "ଆପଣ ଭରଣ କରିଥିବା ପ୍ରବେଶ ସଙ୍କେତଟି ଆସ୍କି-ବିହୀନ ଅକ୍ଷର ମାନଙ୍କୁ ଧାରଣ କରିଅଛି, ଯାହାକି ସ୍ବୀକାର୍ଯ୍ଯ " "ନୁହେଁ।ବହାର ସ୍ବୀକୃତ ନୁହେଁ।" #: ../iw/autopart_type.py:97 msgid "" "No partitions are available to resize. Only physical partitions with " "specific filesystems can be resized." msgstr "" "ଆକାର ବଦଳାଇବା ପାଇଁ ବିଭାଜନ ଉପଲବ୍ଧ ନାହିଁ। ନିର୍ଦ୍ଦିଷ୍ଟ ଫାଇଲତନ୍ତ୍ର ସହିତ କେବଳ ଭୌତିକ ବିଭାଜନ ଗୁଡିକର " "ଆକାର ବଦଳା ଯାଇ ପାରିବ।" #: ../iw/autopart_type.py:183 msgid "Do you really want to boot from a disk which is not used for installation?" msgstr "କଣ ଆପଣ ପ୍ରକୃତରେ ଗୋଟିଏ ଡିସ୍କରୁ ବୁଟକରିବାକୁ ଚାହୁଁଛନ୍ତି ଯାହାକି ସ୍ଥାପନରେ ବ୍ୟବହାର ହୁଏନାହିଁ?" #: ../iw/autopart_type.py:261 msgid "Invalid Initiator Name" msgstr "ଅବୈଧ ପ୍ରାରମ୍ଭକଙ୍କ ନାମ:" #: ../iw/autopart_type.py:262 msgid "You must provide an initiator name." msgstr "ଆପଣ ଗୋଟିଏ ପ୍ରାରମ୍ଭକ ନାମ ଭରଣ କରିବା ଉଚିତ।" #: ../iw/autopart_type.py:284 ../iw/autopart_type.py:288 #: ../iw/autopart_type.py:294 ../iw/autopart_type.py:298 #: ../textw/partition_text.py:1711 ../textw/partition_text.py:1714 #: ../textw/partition_text.py:1719 ../textw/partition_text.py:1723 msgid "Missing value" msgstr "ଅନୁପସ୍ଥିତ ମୂଲ୍ୟ" #: ../iw/autopart_type.py:285 msgid "CHAP username is required if CHAP password is defined." msgstr "ଯଦି CHAP ପ୍ରବେଶସଂକେତକୁ ବ୍ୟାଖ୍ୟା କରାଯାଇଛି, ତେବେ CHAP ଚାଳକ ନାମ ଆବଶ୍ୟକ." #: ../iw/autopart_type.py:289 msgid "CHAP password is required if CHAP username is defined." msgstr "ଯଦି CHAP ଚାଳକ ନାମକୁ ବ୍ୟାଖ୍ୟା କରାଯାଇଛି, ତେବେ CHAP ପ୍ରବେଶସଂକେତ ଆବଶ୍ୟକ." #: ../iw/autopart_type.py:295 msgid "Reverse CHAP username is required if reverse CHAP password is defined." msgstr "ଯଦି ଓଲଟା CHAP ପ୍ରବେଶସଂକେତକୁ ବ୍ୟାଖ୍ୟା କରାଯାଇଛି, ତେବେ ଓଲଟା CHAP ଚାଳକ ନାମ ଆବଶ୍ୟକ." #: ../iw/autopart_type.py:299 msgid "Reverse CHAP password is required if reverse CHAP username is defined." msgstr "ଯଦି ଓଲଟା CHAP ଚାଳକ ନାମକୁ ବ୍ୟାଖ୍ୟା କରାଯାଇଛି, ତେବେ ଓଲଟା CHAP ପ୍ରବେଶସଂକେତ ଆବଶ୍ୟକ." #: ../iw/autopart_type.py:317 msgid "Error with Data" msgstr "ତଥ୍ଯ ସହିତ ତୃଟି" #: ../iw/autopart_type.py:440 ../textw/partition_text.py:1518 msgid "Remove all partitions on selected drives and create default layout" msgstr "ଚୟିତ ଡ୍ରାଇଭରୁ ସମସ୍ତ ବିଭାଜନକୁ ଅପସାରଣ କରନ୍ତୁ ଏବଂ ପୂର୍ବନିର୍ଦ୍ଧାରିତ ବିନ୍ଯାସ ସୃଷ୍ଟି କରନ୍ତୁ।" #: ../iw/autopart_type.py:441 ../textw/partition_text.py:1519 msgid "Remove Linux partitions on selected drives and create default layout" msgstr "ଚୟିତ ଡ୍ରାଇଭରୁ linux ବିଭାଜନକୁ ଅପସାରଣ କରନ୍ତୁ ଏବଂ ପୂର୍ବନିର୍ଦ୍ଧାରିତ ବିନ୍ଯାସ ସୃଷ୍ଟି କରନ୍ତୁ।" #: ../iw/autopart_type.py:442 msgid "Resize existing partition and create default layout in free space" msgstr "ସ୍ଥିତବାନ ବିଭାଜନର ଆକାର ବଦଳାନ୍ତୁ ଏବଂ ମୁକ୍ତ ସ୍ଥାନରେ ପୂର୍ବନିର୍ଦ୍ଧାରିତ ବିନ୍ଯାସ ସୃଷ୍ଟି କରନ୍ତୁ" #: ../iw/autopart_type.py:443 ../textw/partition_text.py:1520 msgid "Use free space on selected drives and create default layout" msgstr "ଚୟିତ ଡ୍ରାଇଭ ମାନଙ୍କରେ ଖାଲିସ୍ଥାନକୁ ବ୍ଯବହାର କରନ୍ତୁ ଏବଂ ପୂର୍ବନିର୍ଦ୍ଧାରିତ ବିନ୍ଯାସ ସୃଷ୍ଟି କରନ୍ତୁ।" #: ../iw/autopart_type.py:444 ../textw/partition_text.py:1521 msgid "Create custom layout" msgstr "ଇଚ୍ଛାରୂପଣ ବିନ୍ଯାସ ପ୍ରସ୍ତୁତ କରନ୍ତୁ।" #: ../iw/blpasswidget.py:47 msgid "_Use a boot loader password" msgstr "ଗୋଟିଏ ବୁଟ-ଲୋଡର ପ୍ରବେଶ ସଙ୍କେତକୁ ବ୍ଯବହାର କରନ୍ତୁ (_U)" #: ../iw/blpasswidget.py:48 msgid "" "A boot loader password prevents users from changing kernel options, " "increasing security." msgstr "" "ଗୋଟିଏ ବୁଟ-ଲୋଡର ପ୍ରବେଶ ସଙ୍କେତ କର୍ଣ୍ଣଲରେ ଥିବା ବିକଳ୍ପ ମାନଙ୍କୁ ପରିବର୍ତ୍ତନ କରିବା ପାଇଁ ସୁରକ୍ଷାରେ " "ଉନ୍ନତି କରି, ଚାଳକକୁ ନିଷେଧ କରିଥାଏ." #: ../iw/blpasswidget.py:79 msgid "Change _password" msgstr "ପ୍ରବେଶ ସଙ୍କେତ କୁ ବଦଳାନ୍ତୁ (_p)" #: ../iw/blpasswidget.py:102 msgid "Enter Boot Loader Password" msgstr "ବୁଟ-ଲୋଡର ପ୍ରବେଶ ସଙ୍କେତକୁ ଭରଣ କରନ୍ତୁ" #: ../iw/blpasswidget.py:108 msgid "" "Enter a boot loader password and then confirm it. (Note that your BIOS " "keymap may be different than the actual keymap you are used to.)" msgstr "" "ଗୋଟିଏ ବୁଟ ଧାରକ ପ୍ରବେଶ ସଙ୍କେତକୁ ଭରଣ କରନ୍ତୁ ଏବଂ ଏହାକୁ ନିଶ୍ଚିତ କରନ୍ତୁ। (ଏହା ଦୃଷ୍ଟି ରଖନ୍ତୁ ଯେ " "ଆପଣଙ୍କ BIOS କି-ମ୍ଯାପ ଆପଣ ବ୍ଯବହାର କରୁଥିବା ପ୍ରକୃତ କି-ମ୍ଯାପ ଠାରୁ ଭିନ୍ନ ହୋଇପାରେ।)" #: ../iw/blpasswidget.py:115 msgid "_Password:" msgstr "ନିଶ୍ଚିତ କରନ୍ତୁ (_P):" #: ../iw/blpasswidget.py:121 msgid "Con_firm:" msgstr "ନିଶ୍ଚିତ କରନ୍ତୁ (_f):" #: ../iw/blpasswidget.py:142 msgid "Passwords don't match" msgstr "ପ୍ରବେଶ ସଙ୍କେତ ଗୁଡିକ ମିଶୁ ନାହିଁ" #: ../iw/blpasswidget.py:143 ../textw/bootloader_text.py:443 msgid "Passwords do not match" msgstr "ପ୍ରବେଶ ସଙ୍କେତ ଗୁଡିକ ମିଶୁ ନାହିଁ" #: ../iw/blpasswidget.py:152 ../textw/bootloader_text.py:453 msgid "" "Your boot loader password is shorter than six characters. We recommend a " "longer boot loader password.\n" "\n" "Would you like to continue with this password?" msgstr "" "ଆପଣଙ୍କ ବୁଟ-ଲୋଡର ପ୍ରବେଶ ସଙ୍କେତଟି ୬ଟି ଅକ୍ଷରରୁ କମ ଅଟେ। ଗୋଟିଏ ଅଧିକ ଲମ୍ବ ବିଶିଷ୍ଟ ବୁଟ-ଲୋଡର ପ୍ରବେଶ " "ସଙ୍କେତ ଭରଣ କରିବା ପାଇଁ ଆମେ ପରାମର୍ଶ କରୁଅଛୁ।\n" "\n" "ଆପଣ ଏହି ପ୍ରବେଶ ସଙ୍କେତ ସହିତ ଆଗକୁ ବଢିବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି?" #: ../iw/bootloader_main_gui.py:37 ../textw/bootloader_text.py:46 #: ../textw/bootloader_text.py:111 ../textw/bootloader_text.py:168 #: ../textw/bootloader_text.py:286 ../textw/bootloader_text.py:395 msgid "Boot Loader Configuration" msgstr "ବୁଟ-ଲୋଡର ବିନ୍ଯାସ" #: ../iw/bootloader_main_gui.py:174 ../iw/bootloader_main_gui.py:179 #: ../iw/bootloader_main_gui.py:216 #, python-format msgid "_Install boot loader on /dev/%s." msgstr "ବୁଟ-ଲୋଡରକୁ /dev/%s ରେ ସ୍ଥାପନ କରନ୍ତୁ (_I)." #: ../iw/bootloader_main_gui.py:222 msgid "_Change device" msgstr "ଉପକରଣ ପରିବର୍ତ୍ତନ କରନ୍ତୁ (_C)" #: ../iw/congrats_gui.py:33 msgid "Congratulations" msgstr "ଅଭିନନ୍ଦନ" #: ../iw/congrats_gui.py:71 msgid "" "Please reboot the system to use the installed system.\n" "\n" msgstr "" "ସ୍ଥାପିତ ତନ୍ତ୍ରକୁ ବ୍ୟବହାର କରିବା ପାଇଁ ଦୟାକରି ପୁନଃ ଚାଳନ କରନ୍ତୁ.\n" "\n" #: ../iw/congrats_gui.py:74 msgid "" "Press the \"Reboot\" button to reboot your system.\n" "\n" msgstr "" "ଆପଣଙ୍କ ତନ୍ତ୍ରକୁ ପୁନର୍ଚାଳନ କରିବା ପାଇଁ \"ପୁନର୍ଚାଳନ କରନ୍ତୁ\" ବଟନକୁ ଦବାନ୍ତୁ।\n" "\n" #: ../iw/congrats_gui.py:78 #, python-format msgid "" "Congratulations, the installation is complete.\n" "\n" "%s%s" msgstr "" "ଅଭିନନ୍ଦନ, ସ୍ଥାପନ ପ୍ରକ୍ରିୟା ଟି ସମ୍ପୂର୍ଣ୍ଣ ହେଲା।\n" "\n" "%s%s" #: ../iw/examine_gui.py:37 msgid "Upgrade Examine" msgstr "ପରୀକ୍ଷଣ ର ଉନ୍ନୟନ କରନ୍ତୁ" #: ../iw/examine_gui.py:59 #, python-format msgid "_Install %s" msgstr "%s କୁ ସ୍ଥାପିତ କରନ୍ତୁ (_I)" #: ../iw/examine_gui.py:61 msgid "" "Choose this option to freshly install your system. Existing software and " "data may be overwritten depending on your configuration choices." msgstr "" "ଆପଣଙ୍କ ତନ୍ତ୍ରକୁ ନବୀନ ଭାବରେ ସ୍ଥାପନ କରିବା ପାଇଁ ଏହି ବିକଳ୍ପକୁ ଚୟନ କରନ୍ତୁ। ଏହା ଆପଣଙ୍କ ବିନ୍ଯାସ " "ପସନ୍ଦ ଉପରେ ନିର୍ଭର କରି ପ୍ରସ୍ଥାନ କରୁଥିବା ସଫଟୱେର ଏବଂ ତଥ୍ଯକୁ ନବଲିଖନ କରିଦେଇପାରେ।" #: ../iw/examine_gui.py:65 msgid "_Upgrade an existing installation" msgstr "ଗୋଟିଏ ଉପସ୍ଥିତ ସ୍ଥାପନ ର ଉନ୍ନୟନ କରନ୍ତୁ (_U)" #: ../iw/examine_gui.py:67 #, python-format msgid "" "Choose this option if you would like to upgrade your existing %s system. " "This option preserves the existing data on your drives." msgstr "" "ଆପଣ ଯଦି ଆପଣଙ୍କର ଅବସ୍ଥିତ %s ତନ୍ତ୍ରକୁ ଉନ୍ନୟନ କରିବା ପାଇଁ ଚାହୁଁଥିଲେ ଏହି ବିକଳ୍ପକୁ ଚୟନ କରନ୍ତୁ। ଏହି " "ବିକଳ୍ପ ଅବସ୍ଥିତ ତଥ୍ଯକୁ ଆପଣଙ୍କ ଡ୍ରାଇଭରେ ସଂଗୃହିତ କରିବ।" #: ../iw/examine_gui.py:116 msgid "The following installed system will be upgraded:" msgstr "ନିମ୍ନଲିଖିତ ସ୍ଥିପିତ ତନ୍ତ୍ର ର ଉନ୍ନୟନ କରାଯିବ:" #: ../iw/examine_gui.py:129 msgid "Unknown Linux system" msgstr "ଅଜଣା Linux ତନ୍ତ୍ର" #: ../iw/language_gui.py:33 ../textw/language_text.py:46 msgid "Language Selection" msgstr "ଭାଷା ଚୟନ" #: ../iw/language_gui.py:79 ../textw/language_text.py:47 ../loader/lang.c:376 msgid "What language would you like to use during the installation process?" msgstr "ଏହି ସ୍ଥାପନ ପ୍ରକ୍ରିୟା ସମୟରେ ଆପଣ କେଉଁ ଭାଷା ର ପ୍ରୟୋଗ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../iw/lvm_dialog_gui.py:124 ../iw/lvm_dialog_gui.py:171 #: ../iw/lvm_dialog_gui.py:182 ../iw/lvm_dialog_gui.py:222 #: ../iw/lvm_dialog_gui.py:296 ../iw/lvm_dialog_gui.py:626 #: ../iw/lvm_dialog_gui.py:700 ../iw/lvm_dialog_gui.py:918 #: ../textw/partition_text.py:1276 ../textw/partition_text.py:1295 msgid "Not enough space" msgstr "ଯଥେଷ୍ଟ ଖାଲି ସ୍ଥାନ ନାହିଁ" #: ../iw/lvm_dialog_gui.py:125 msgid "" "The physical extent size cannot be changed because otherwise the space " "required by the currently defined logical volumes will be increased to more " "than the available space." msgstr "" "ଭୌତିକ ପରିସୀମା ଆକାରକୁ ପରିବର୍ତ୍ତନ କରିହେବ ନାହିଁ କାରଣ ଅନ୍ଯଥା ବର୍ତ୍ତମାନ ପରିଭାଷିତ ତାର୍କିକ ଘନଫଳ " "ଦ୍ବାରା ଆବଶ୍ୟକୀୟ ସ୍ଥାନ ଉପଲବ୍ଧ ସ୍ଥାନ ଠାରୁ ଅଧିକ ହୋଇଯିବ।" #: ../iw/lvm_dialog_gui.py:134 msgid "Confirm Physical Extent Change" msgstr "ଭୌତିକ ବିସ୍ତାର ପରିବର୍ତନ କୁ ନିଶ୍ତିତ କରନ୍ତୁ" #: ../iw/lvm_dialog_gui.py:135 msgid "" "This change in the value of the physical extent will require the sizes of " "the current logical volume requests to be rounded up in size to an integer " "multiple of the physical extent.\n" "\n" "This change will take effect immediately." msgstr "" "ଭୌତିକ ପରିସୀମାର ମୂଲ୍ଯର ପରିବର୍ତ୍ତନ ବର୍ତ୍ତମାନ ଉପସ୍ଥିତ ତାର୍କିକ ଘନଫଳ ନିବେଦନର ଆକାର ଆବଶ୍ଯକ କରିଥାଏ " "ଯାହାକୁ ଭୌତିକ ପରିସୀମାର ଗୋଟିଏ ପୂର୍ଣ୍ଣାଙ୍କ ଗୁଣିତକ ଭାବରେ ପୂର୍ଣ୍ଣାବସ୍ଥାକୁ ଅଣାଯିବ।\n" "\n" "ଏହି ପରିବର୍ତ୍ତନ ତୁରନ୍ତ ପ୍ରଭାବିତ ହେବ।" #: ../iw/lvm_dialog_gui.py:144 ../iw/lvm_dialog_gui.py:204 msgid "C_ontinue" msgstr "ଆଗକୁ ବଢନ୍ତୁ (_o)" #: ../iw/lvm_dialog_gui.py:172 #, python-format msgid "" "The physical extent size cannot be changed because the value selected (%" "10.2f MB) is larger than the smallest physical volume (%10.2f MB) in the " "volume group." msgstr "" "ଭୌତିକ ପରିସୀମାର ଆକାରକୁ ବଦଳାଇ ହେବନାହିଁ କାରଣ ଚୟିତ ମୂଲ୍ଯ (%10.2f ମେଗା-ବାଇଟ) ଘନଫଳ ସମୂହରେ " "ଥିବା କ୍ଷୁଦ୍ରତମ ଭୌତିକ ଘନଫଳ (%10.2f ମେଗା-ବାଇଟ) ଠାରୁ ବଡ ଅଟେ।" #: ../iw/lvm_dialog_gui.py:183 #, python-format msgid "" "The physical extent size cannot be changed because the value selected (%" "10.2f MB) is too large compared to the size of the smallest physical volume " "(%10.2f MB) in the volume group." msgstr "" "ଭୌତିକ ପରିସୀମାର ଆକାରକୁ ବଦଳାଇ ହେବନାହିଁ କାରଣ ଚୟିତ ମୂଲ୍ଯ (%10.2f ମେଗା-ବାଇଟ) ଘନଫଳ ସମୂହରେ " "ଥିବା କ୍ଷୁଦ୍ରତମ ଭୌତିକ ଘନଫଳ (%10.2f ମେଗା-ବାଇଟ) ଠାରୁ ବହୁତ ବଡ ଅଟେ।" #: ../iw/lvm_dialog_gui.py:197 msgid "Too small" msgstr "ବହୁତ ଛୋଟ" #: ../iw/lvm_dialog_gui.py:198 msgid "" "This change in the value of the physical extent will waste substantial space " "on one or more of the physical volumes in the volume group." msgstr "" "ଭୌତିକ ପରିସୀମାର ମୂଲ୍ଯ ପରିବର୍ତ୍ତନ, ଘନଫଳ ସମୂହରେ ଥିବା ଏକ କିମ୍ବା ଏକାଧିକ ଭୌତିକ ଘନଫଳର ବୃହଦାକାର " "ସ୍ଥାନକୁ ନଷ୍ଟ କରିଦେବ।" #: ../iw/lvm_dialog_gui.py:223 #, python-format msgid "" "The physical extent size cannot be changed because the resulting maximum " "logical volume size (%10.2f MB) is smaller than one or more of the currently " "defined logical volumes." msgstr "" "ଭୌତିକ ପରିସୀମାର ଆକାରକୁ ବଦଳାଇ ହେବନାହିଁ କାରଣ ସର୍ବାଧିକ ପ୍ରାପ୍ତ ତାର୍କିକ ଘନଫଳର ଆକାର (%10.2f " "ମେଗା-ବାଇଟ) ବର୍ତ୍ତମାନ ପରିଭାଷିତ ଏକା କିମ୍ବା ଏକାଧିକ ତାର୍ତିକିକ ଘନଫଳ ଠାରୁ କ୍ଷୁଦ୍ରତର ଅଟେ।" #: ../iw/lvm_dialog_gui.py:297 msgid "" "You cannot remove this physical volume because otherwise the volume group " "will be too small to hold the currently defined logical volumes." msgstr "" "ଆପଣ ଭୌତିକ ଆୟତନକୁ ଅପସାରଣ କରିପାରିବ ନାହିଁ କାରଣ ଏପରି କଲେ ଆୟତନ ସମୂହ ବର୍ତ୍ତମାନ ପରିଭାଷିତ ତାର୍କିକ " "ଆୟତନ ସମୂହକୁ ଧାରଣ କରିବା ପାଇଁ ଛୋଟ ପଡିଯିବ।" #: ../iw/lvm_dialog_gui.py:377 ../textw/partition_text.py:1115 msgid "Make Logical Volume" msgstr "ତାର୍କିକ ଘନଫଳା କୁ ପ୍ରସ୍ତୁତ କରନ୍ତୁ" #: ../iw/lvm_dialog_gui.py:380 #, python-format msgid "Edit Logical Volume: %s" msgstr "ତାର୍କିକ ଘନଫଳକୁ ସମ୍ପାଦିତ କରନ୍ତୁ: %s" #: ../iw/lvm_dialog_gui.py:382 ../textw/partition_text.py:1113 msgid "Edit Logical Volume" msgstr "ତାର୍କିକ ଘନଫଳକୁ ସମ୍ପାଦିତ କରନ୍ତୁ" #: ../iw/lvm_dialog_gui.py:395 ../iw/partition_dialog_gui.py:300 #: ../iw/raid_dialog_gui.py:305 msgid "_Mount Point:" msgstr "ମାଉଣ୍ଟ ବିନ୍ଦୁ (_M):" #: ../iw/lvm_dialog_gui.py:403 ../iw/raid_dialog_gui.py:318 msgid "_File System Type:" msgstr "ଫାଇଲ ତନ୍ତ୍ର ର ପ୍ରକାର (_F):" #: ../iw/lvm_dialog_gui.py:413 ../iw/raid_dialog_gui.py:328 msgid "Original File System Type:" msgstr "ମୂଳ ଫାଇଲ ତନ୍ତ୍ର ର ପ୍ରକାର:" #: ../iw/lvm_dialog_gui.py:418 ../iw/raid_dialog_gui.py:333 msgid "Unknown" msgstr "ଅଜଣା" #: ../iw/lvm_dialog_gui.py:424 ../iw/partition_dialog_gui.py:350 #: ../iw/raid_dialog_gui.py:339 msgid "Original File System Label:" msgstr "ମୂଳ ଫାଇଲ ତନ୍ତ୍ର ସୂଚକ:" #: ../iw/lvm_dialog_gui.py:433 msgid "_Logical Volume Name:" msgstr "ତାର୍କିକ ଘନଫଳର ନାମ (_L):" #: ../iw/lvm_dialog_gui.py:441 ../textw/partition_text.py:306 msgid "Logical Volume Name:" msgstr "ତାର୍କିକ ଘନଫଳର ନାମ:" #: ../iw/lvm_dialog_gui.py:449 ../iw/partition_dialog_gui.py:362 msgid "_Size (MB):" msgstr "ଆକାର (ମେଗା-ବାଇଟ୍) (_S):" #: ../iw/lvm_dialog_gui.py:455 ../iw/partition_dialog_gui.py:379 #: ../textw/partition_text.py:321 ../textw/partition_text.py:398 #: ../textw/partition_text.py:481 ../textw/partition_text.py:589 msgid "Size (MB):" msgstr "ଆକାର (ମେଗା-ବାଇଟ୍):" #: ../iw/lvm_dialog_gui.py:470 #, python-format msgid "(Max size is %s MB)" msgstr "(ସର୍ବାଧିକ ଆକାର ଟି %s ମେଗା-ବାଇଟ୍)" #: ../iw/lvm_dialog_gui.py:479 ../iw/partition_dialog_gui.py:464 #: ../iw/partition_ui_helpers_gui.py:301 ../iw/raid_dialog_gui.py:313 msgid "_Encrypt" msgstr "ସଂଗୁପ୍ତ (_E)" #: ../iw/lvm_dialog_gui.py:544 ../textw/partition_text.py:1265 msgid "Illegal size" msgstr "ଅବୈଧ ଆକାର" #: ../iw/lvm_dialog_gui.py:545 ../textw/partition_text.py:1266 msgid "The requested size as entered is not a valid number greater than 0." msgstr "ଭରଣ କରା ଯାଇଥିବା ନିବେଦିତ ଆକାର ଟି ୦ରୁ ବଡ ଗୋଟିଏ ମାନ୍ଯ ସଂଖ୍ଯା ନୁହଁ।" #: ../iw/lvm_dialog_gui.py:580 msgid "Mount point in use" msgstr "ମାଉଣ୍ଟ ବିନ୍ଦୁ ବ୍ଯବହୃତ ହେଉଅଛି" #: ../iw/lvm_dialog_gui.py:581 #, python-format msgid "The mount point \"%s\" is in use. Please pick another." msgstr "\"%s\" ମାଉଣ୍ଟ ବିନ୍ଦୁଟି ପୂର୍ବରୁ ବ୍ଯବହୃତ ହେଉଅଛି, ଦୟାକରି ଅନ୍ଯ ଗୋଟିଏ ନାମ ବାଛନ୍ତୁ।" #: ../iw/lvm_dialog_gui.py:592 ../textw/partition_text.py:1236 msgid "Illegal Logical Volume Name" msgstr "ଅବୈଧ ତାର୍କିକ ଘନଫଳ ନାମ" #: ../iw/lvm_dialog_gui.py:611 ../textw/partition_text.py:1253 msgid "Illegal logical volume name" msgstr "ଅବୈଧ ତାର୍କିକ ଘନଫଳ ନାମ" #: ../iw/lvm_dialog_gui.py:612 ../textw/partition_text.py:1254 #, python-format msgid "The logical volume name \"%s\" is already in use. Please pick another." msgstr "\"%s\" ତାର୍କିକ ଘନଫଳ ନାମ ଟି ପୂର୍ବରୁ ବ୍ଯବହୃତ ହେଉଅଛି। ଦୟାକରି ଅନ୍ଯ ଗୋଟିଏ ନାମ ବାଛନ୍ତୁ।" #: ../iw/lvm_dialog_gui.py:627 #, python-format msgid "" "The current requested size (%10.2f MB) is larger than the maximum logical " "volume size (%10.2f MB). To increase this limit you can create more Physical " "Volumes from unpartitioned disk space and add them to this Volume Group." msgstr "" "ବର୍ତ୍ତମାନ ନିବେଦିତ ଆକାର (%10.2f ମେଗା-ବାଇଟ) ସର୍ବାଧିକ ତାର୍କିକ ଘନଫଳ ଆକାର (%10.2f ମେଗା-" "ବାଇଟ) ଠାରୁ ଅଧିକ ଅଟେ। ଏହି ସୀମାକୁ ବୃଦ୍ଧି କରିବା ପାଇଁ ଆପଣ ଅବିଭାଜିତ ଡିସ୍କ ସ୍ଥାନରୁ ଅଧିକ ଭୌତିକ ଘନଫଳ " "ସୃଷ୍ଟି କରିପାରିବେ ଏବଂ ଏହାକୁ ଘନଫଳ ସମୂହରେ ଯୋଗ କରିପାରିବେ।" #: ../iw/lvm_dialog_gui.py:677 ../iw/partition_dialog_gui.py:188 #: ../iw/partition_dialog_gui.py:200 ../iw/partition_dialog_gui.py:246 #: ../iw/raid_dialog_gui.py:232 ../textw/partition_text.py:889 #: ../textw/partition_text.py:910 ../textw/partition_text.py:1083 #: ../textw/partition_text.py:1314 msgid "Error With Request" msgstr "ନିବେଦନ ସହିତ ତୃଟି" #: ../iw/lvm_dialog_gui.py:701 ../iw/lvm_dialog_gui.py:919 #, python-format msgid "" "The logical volumes you have configured require %d MB, but the volume group " "only has %d MB. Please either make the volume group larger or make the " "logical volume(s) smaller." msgstr "" "ଆପଣ ବିନ୍ଯାସ କରିଥିବା ତାର୍କିକ ଘନଫଳ ଗୁଡିକ %d ମେଗା-ବାଇଟ ଆବଶ୍ୟକ କରନ୍ତି, କିନ୍ତୁ ଘନଫଳ ସମୂହରେ କେବଳ %" "d ମେଗା-ବାଇଟ ଅଛି। ଦୟାକରି ଘନଫଳ ସମୂହକୁ ବଡ କରନ୍ତୁ କିମ୍ବା ତାର୍କିକ ଘନଫଳକୁ (ମାନଙ୍କୁ) ଛୋଟ କରନ୍ତୁ।" #: ../iw/lvm_dialog_gui.py:759 msgid "No free slots" msgstr "କୌଣସି ଖାଲି ସ୍ଲଟ୍ ନାହିଁ" #: ../iw/lvm_dialog_gui.py:760 #, python-format msgid "You cannot create more than %s logical volumes per volume group." msgstr "ପ୍ରତି ଘନଫଳ ସମୂହରେ ଆପଣ %s ତାର୍କିକ ଘନଫଳରୁ ଅଧିକ ସୃଷ୍ଟି କରି ପାରିବେ ନାହିଁ।" #: ../iw/lvm_dialog_gui.py:766 msgid "No free space" msgstr "କୌଣସି ଖାଲି ସ୍ଥାନ ନାହିଁ" #: ../iw/lvm_dialog_gui.py:767 msgid "" "There is no room left in the volume group to create new logical volumes. To " "add a logical volume you must reduce the size of one or more of the " "currently existing logical volumes" msgstr "" "ଘନଫଳ ସମୂହରେ ନୂତନ ତାର୍କିକ ଘନଫଳ ସୃଷ୍ଟି କରିବା ପାଇଁ କୌଣସି ବଳକା କକ୍ଷ ନାହିଁ। ଗୋଟିଏ ତାର୍କିକ ଘନଫଳକୁ " "ଯୋଗ କରିବା ପାଇଁ ବର୍ତ୍ତମାନ ଅବସ୍ଥିତ ଏକ କିମ୍ବା ଏକାଧିକ ତାର୍କିକ ଘନଫଳ ମାନଙ୍କ ଆକାରକୁ ହ୍ରାସ କରିବା " "ଉଚିତ।" #: ../iw/lvm_dialog_gui.py:795 #, python-format msgid "Are you sure you want to delete the logical volume \"%s\"?" msgstr "ଆପଣ ନିଶ୍ଚିତ କି ଆପଣ \"%s\" ତାର୍କିକ ଘନଫଳକୁ ଅପସାରଣ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../iw/lvm_dialog_gui.py:930 msgid "Invalid Volume Group Name" msgstr "ଅବୈଧ ଘନଫଳ ସମୂହ ର ନାମ" #: ../iw/lvm_dialog_gui.py:941 msgid "Name in use" msgstr "ନାମ ଯାହାକି ବ୍ଯବହୃତ ହେଉଅଛି" #: ../iw/lvm_dialog_gui.py:942 #, python-format msgid "The volume group name \"%s\" is already in use. Please pick another." msgstr "\"%s\" ଘନଫଳ ସମୂହ ର ନାମ ଟି ପୂର୍ବରୁ ବ୍ଯବହୃତ ହେଉଅଛି। ଦୟାକରି ଅନ୍ଯ ଗୋଟିଏ ନାମ ବାଛନ୍ତୁ।" #: ../iw/lvm_dialog_gui.py:985 msgid "Not enough physical volumes" msgstr "ଯଥେଷ୍ଟ ଭୌତିକ ଆୟତନ ନାହିଁ" #: ../iw/lvm_dialog_gui.py:986 msgid "" "At least one unused physical volume partition is needed to create an LVM " "Volume Group.\n" "\n" "Create a partition or RAID array of type \"physical volume (LVM)\" and then " "select the \"LVM\" option again." msgstr "" "ଗୋଟିଏ LVM ଘନଫଳ ସମୂହ ସୃଷ୍ଟି କରିବା ପାଇଁ ଅତିକମରେ ଗୋଟିଏ ଅବ୍ଯବହୃତ ଭୌତିକ ଘନଫଳ ବିଭାଜନ ଆବଶ୍ୟକ।\n" "\n" "ଗୋଟିଏ ବିଭାଜନ କିମ୍ବା \"ଭୌତିକ ଘନଫଳ(LVM)\" ପ୍ରକାରର ରେଡ ସାରଣୀ ସୃଷ୍ଟି କରନ୍ତୁ ଏବଂ ତା'ପରେ " "ପୁନର୍ବାର \"LVM\" ବିକଳ୍ପକୁ ଚୟନ କରନ୍ତୁ।" #: ../iw/lvm_dialog_gui.py:997 msgid "Make LVM Volume Group" msgstr "LVM ଘନଫଳ ସମୂହ ପ୍ରସ୍ତୁତ କରନ୍ତୁ" #: ../iw/lvm_dialog_gui.py:1000 #, python-format msgid "Edit LVM Volume Group: %s" msgstr "LVM ଘନଫଳ ସମୂହ କୁ ସମ୍ପାଦିତ କରନ୍ତୁ: %s" #: ../iw/lvm_dialog_gui.py:1002 msgid "Edit LVM Volume Group" msgstr "LVM ଘନଫଳ ସମୂହ କୁ ସମ୍ପାଦିତ କରନ୍ତୁ" #: ../iw/lvm_dialog_gui.py:1018 msgid "_Volume Group Name:" msgstr "ଘନଫଳ ସମୂହ ର ନାମ (_V):" #: ../iw/lvm_dialog_gui.py:1026 msgid "Volume Group Name:" msgstr "ଘନଫଳ ସମୂହ ର ନାମ:" #: ../iw/lvm_dialog_gui.py:1034 msgid "_Physical Extent:" msgstr "ଭୌତିକ ବିସ୍ତାର (_P):" #: ../iw/lvm_dialog_gui.py:1049 msgid "Physical Volumes to _Use:" msgstr "ବ୍ଯବହାର କରିବା ପାଇଁ ଭୌତିକ ଆୟତନ (_U):" #: ../iw/lvm_dialog_gui.py:1055 msgid "Used Space:" msgstr "ବ୍ଯବହୃତ ସ୍ଥାନ:" #: ../iw/lvm_dialog_gui.py:1072 msgid "Free Space:" msgstr "ଖାଲି ସ୍ଥାନ:" #: ../iw/lvm_dialog_gui.py:1090 msgid "Total Space:" msgstr "ସମୁଦାୟ ସ୍ଥାନ:" #: ../iw/lvm_dialog_gui.py:1119 msgid "Logical Volume Name" msgstr "ତାର୍କିକ ଘନଫଳ ର ନାମ" #: ../iw/lvm_dialog_gui.py:1122 ../iw/partition_gui.py:371 #: ../iw/upgrade_swap_gui.py:142 ../textw/partition_text.py:1424 #: ../textw/upgrade_text.py:120 msgid "Mount Point" msgstr "ମାଉଣ୍ଟ ବିନ୍ଦୁ" #: ../iw/lvm_dialog_gui.py:1125 ../iw/partition_gui.py:376 msgid "Size (MB)" msgstr "ଆକାର (ମେଗା ବାଇଟ୍)" #: ../iw/lvm_dialog_gui.py:1139 ../iw/osbootwidget.py:96 msgid "_Add" msgstr "ଯୋଗ କରନ୍ତୁ (_A)" #: ../iw/lvm_dialog_gui.py:1142 ../iw/osbootwidget.py:100 #: ../iw/partition_gui.py:1383 msgid "_Edit" msgstr "ସମ୍ପାଦନ(_E)" #: ../iw/lvm_dialog_gui.py:1157 msgid "_Logical Volumes" msgstr "ତାର୍କିକ ଘନଫଳ (_L)" #: ../iw/netconfig_dialog.py:174 ../textw/netconfig_text.py:36 #, python-format msgid "" "An error occurred converting the value entered for \"%s\":\n" "%s" msgstr "" "\"%s\" ପାଇଁ ପ୍ରବେଶ କରା ଯାଇଥିବା ମୂଲ୍ଯ କୁ ରୂପାନ୍ତରିତ କରିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିଲିଖିତ ହେଲା:\n" "%s" #: ../iw/netconfig_dialog.py:176 ../iw/netconfig_dialog.py:185 #: ../textw/netconfig_text.py:35 ../textw/netconfig_text.py:40 msgid "Error With Data" msgstr "ତଥ୍ଯ ସହିତ ତୃଟି" #: ../iw/netconfig_dialog.py:184 #, python-format msgid "A value is required for the field %s." msgstr "%s କ୍ଷେତ୍ର ପାଇଁ ଗୋଟିଏ ମୂଲ୍ଯ ଆବଶ୍ୟକ।" #: ../iw/netconfig_dialog.py:205 msgid "Dynamic IP" msgstr "ଗତିଶୀଳ ଆଇ.ପି." #: ../iw/netconfig_dialog.py:206 #, python-format msgid "Sending request for IP information for %s..." msgstr "%s ପାଇଁ ଆଇ.ପି. ସୂଚନା ପାଇଁ ଅନୁରୋଧ ପଠାଉଛି..." #: ../iw/netconfig_dialog.py:222 ../iw/netconfig_dialog.py:225 #: ../textw/netconfig_text.py:213 ../textw/netconfig_text.py:216 msgid "IP Address" msgstr "ଆଇ.ପି. ଠିକଣା" #: ../iw/netconfig_dialog.py:232 ../textw/netconfig_text.py:223 msgid "IPv4 CIDR prefix must be between 0 and 32." msgstr "IPv6 CIDR ଉପସର୍ଗର ମୂଲ୍ଯ ୦ ଏବଂ ୩୨ ମଧ୍ଯରେ ରହିବା ଉଚିତ।" #: ../iw/netconfig_dialog.py:233 ../iw/netconfig_dialog.py:239 #: ../iw/netconfig_dialog.py:247 ../iw/netconfig_dialog.py:250 #: ../textw/netconfig_text.py:224 ../textw/netconfig_text.py:230 #: ../textw/netconfig_text.py:238 msgid "IPv4 Network Mask" msgstr "IPv4 ନେଟୱାର୍କ ମାସ୍କ" #: ../iw/netconfig_dialog.py:260 ../textw/netconfig_text.py:251 msgid "Gateway" msgstr "ଗେଟ-ୱେ" #: ../iw/netconfig_dialog.py:270 ../textw/netconfig_text.py:261 msgid "Nameserver" msgstr "ନାମ ସେବକ" #: ../iw/netconfig_dialog.py:279 msgid "Error configuring network device:" msgstr "ନେଟୱାର୍କ ଉପକରଣକୁ ବିନ୍ଯାସ କରିବା ସମୟରେ ତୃଟି:" #: ../iw/netconfig_dialog.py:284 msgid "Error configuring network device" msgstr "ନେଟୱାର୍କ ଉପକରଣକୁ ବିନ୍ଯାସ କରିବା ସମୟରେ ତୃଟି" #: ../iw/network_gui.py:61 ../iw/network_gui.py:67 msgid "Error with Hostname" msgstr "ଆଧାର ନାମ ସହିତ ତୃଟି" #: ../iw/network_gui.py:62 msgid "You must enter a valid hostname for this computer." msgstr "ଏହି କମ୍ପୁଟର ପାଇଁ ଆପଣଙ୍କୁ ଗୋଟିଏ ବୈଧ ଆଧାର ନାମ ଭରଣ କରିବାକୁ ହେବ." #: ../iw/network_gui.py:68 ../textw/network_text.py:83 #, python-format msgid "" "The hostname \"%s\" is not valid for the following reason:\n" "\n" "%s" msgstr "" "ନିମ୍ନଲିଖିତ କାରଣ ବଶତଃ \"%s\" ଆଧାର ନାମ ଟି ବୈଧ ନାହିଁ:\n" "\n" "%s" #: ../iw/osbootwidget.py:51 msgid "Boot loader operating system list" msgstr "ବୁଟ-ଲୋଡର ପ୍ରଚାଳନ ତନ୍ତ୍ର ତାଲିକା" #: ../iw/osbootwidget.py:67 ../textw/bootloader_text.py:262 msgid "Default" msgstr "ପୂର୍ବ ନିର୍ଦ୍ଧାରିତ" #: ../iw/osbootwidget.py:67 ../iw/partition_gui.py:370 msgid "Label" msgstr "ସୂଚକ" #: ../iw/osbootwidget.py:67 ../iw/partition_gui.py:369 #: ../textw/bootloader_text.py:196 ../textw/bootloader_text.py:262 #: ../textw/partition_text.py:1424 msgid "Device" msgstr "ଉପକରଣ" #: ../iw/osbootwidget.py:130 msgid "Image" msgstr "ପ୍ରତିଛବି" #: ../iw/osbootwidget.py:137 msgid "" "Enter a label for the boot loader menu to display. The device (or hard drive " "and partition number) is the device from which it boots." msgstr "" "ବୁଟ-ଲୋଡର ତାଲିକାକୁ ପ୍ରଦର୍ଶିତ କରିବା ପାଇଁ ଗୋଟିଏ ସୂଚକକୁ ଭରଣ କରନ୍ତୁ। ଉପକରଣଟି (କିମ୍ବା ହାର୍ଡ ଡ୍ରାଇଭ " "ଏବଂ ବିଭାଜନ ସଂଖ୍ଯା) ଏପରି ଉପକରଣ ଅଟେ ଯେଉଁଠାରୁ ଏହା ବୁଟ କରିଥାଏ।" #: ../iw/osbootwidget.py:145 msgid "_Label" msgstr "ସୂଚକ (_L)" #: ../iw/osbootwidget.py:153 msgid "_Device" msgstr "ଉପକରଣ (_D)" #: ../iw/osbootwidget.py:187 msgid "Default Boot _Target" msgstr "ପୂର୍ବ ନିର୍ଦ୍ଧାରିତ ବୁଟ ଲକ୍ଷ (_T)" #: ../iw/osbootwidget.py:216 msgid "You must specify a label for the entry" msgstr "ପ୍ରବେଶ କରିବା ପାଇଁ ଆପଣ ଗୋଟିଏ ସୂଚକ କୁ ଉଲ୍ଲେଖିତ କରିବା ଉଚିତ" #: ../iw/osbootwidget.py:225 msgid "Boot label contains illegal characters" msgstr "ବୁଟ ପ୍ରବେଶ ଟି ଅବୈଧ ଅକ୍ଷର ଧାରଣ କରିଅଛି" #: ../iw/osbootwidget.py:249 msgid "Duplicate Label" msgstr "ନକଲି ସୂଚକ" #: ../iw/osbootwidget.py:250 msgid "This label is already in use for another boot entry." msgstr "ଏହି ସୂଚକ ଟି ଅନ୍ଯ ଗୋଟିଏ ବୁଟ ପ୍ରବେଶ ପାଇଁ ପୂର୍ବରୁ ବ୍ଯବହୃତ ହେଉଅଛି।" #: ../iw/osbootwidget.py:263 msgid "Duplicate Device" msgstr "ନକଲି ଉପକରଣ" #: ../iw/osbootwidget.py:264 msgid "This device is already being used for another boot entry." msgstr "ଏହି ଉପକରଣଟି ଅନ୍ଯ ଗୋଟିଏ ବୁଟ ପ୍ରବେଶ ପାଇଁ ପୂର୍ବରୁ ବ୍ଯବହୃତ ହେଉଅଛି।" #: ../iw/osbootwidget.py:328 ../textw/bootloader_text.py:345 msgid "Cannot Delete" msgstr "ଉପସାରିତ କରି ପାରିବ ନାହିଁ" #: ../iw/osbootwidget.py:329 ../textw/bootloader_text.py:346 #, python-format msgid "" "This boot target cannot be deleted because it is for the %s system you are " "about to install." msgstr "" "ବୁଟ ଲକ୍ଷ୍ଯକୁ ଅପସାରଣ କରିହେଲା ନାହିଁ କାରଣ ଏହା ଆପଣ ସ୍ଥାପନ କରିବାକୁ ଯାଉଥିବା %s ତନ୍ତ୍ର ପାଇଁ ଉଦ୍ଦିଷ୍ଟ " "ଅଟେ।" #: ../iw/partition_dialog_gui.py:66 msgid "Additional Size Options" msgstr "ଅତିରିକ୍ତ ଆକାର ବିକଳ୍ପ" #: ../iw/partition_dialog_gui.py:71 msgid "_Fixed size" msgstr "ସ୍ଥିର ଆକାର (_F)" #: ../iw/partition_dialog_gui.py:73 msgid "Fill all space _up to (MB):" msgstr "(ମେଗା ବାଇଟ୍) ପର୍ଯ୍ଯନ୍ତ ସମସ୍ତ ଖାଲି ସ୍ଥାନ କୁ ପୂର୍ଣ୍ଣ କରନ୍ତୁ (_u):" #: ../iw/partition_dialog_gui.py:83 msgid "Fill to maximum _allowable size" msgstr "ସର୍ବାଧିକ ସ୍ବୀକାର୍ଯ୍ଯ ଆକାର କୁ ପୂର୍ଣ୍ଣ କରନ୍ତୁ (_a)" #: ../iw/partition_dialog_gui.py:189 msgid "The end cylinder must be greater than the start cylinder." msgstr "ଅନ୍ତିମ ସିଲିଣ୍ଡର ଟି ପ୍ରାରମ୍ଭିକ ସିଲିଣ୍ଡର ଠାରୁ ବ୍ରୁହତର ହେବା ଉଚିତ।" #: ../iw/partition_dialog_gui.py:277 ../textw/partition_text.py:713 msgid "Add Partition" msgstr "ପ୍ରତିଛବିକୁ ଯୋଗ କରନ୍ତୁ" #: ../iw/partition_dialog_gui.py:280 #, python-format msgid "Edit Partition: /dev/%s" msgstr "ପ୍ରତିଛବିକୁ ସମ୍ପାଦିତ କରନ୍ତୁ: /dev/%s" #: ../iw/partition_dialog_gui.py:282 msgid "Edit Partition" msgstr "ପ୍ରତିଛବିକୁ ସମ୍ପାଦିତ କରନ୍ତୁ" #: ../iw/partition_dialog_gui.py:309 msgid "File System _Type:" msgstr "ଫାଇଲ ତନ୍ତ୍ର ର ପ୍ରକାର (_T):" #: ../iw/partition_dialog_gui.py:326 msgid "Allowable _Drives:" msgstr "ସ୍ବୀକାର୍ଯ୍ଯ ଡ୍ରାଇଭ (_D):" #: ../iw/partition_dialog_gui.py:341 msgid "Drive:" msgstr "ଡ୍ରାଇଭ:" #: ../iw/partition_dialog_gui.py:385 msgid "_Start Cylinder:" msgstr "ପ୍ରାରମ୍ଭିକ ସିଲିଣ୍ଡର (_S):" #: ../iw/partition_dialog_gui.py:403 msgid "_End Cylinder:" msgstr "ଅନ୍ତିମ ସିଲିଣ୍ଡର (_E):" #: ../iw/partition_dialog_gui.py:451 msgid "Force to be a _primary partition" msgstr "ଗୋଟିଏ ପ୍ରାଥମିକ ଷ୍ଟେସନ ହେବା ପାଇଁ ବଳ ପ୍ରୟୋଗ କରନ୍ତୁ (_p)" #: ../iw/partition_gui.py:320 #, python-format msgid "Drive %s (Geom: %s/%s/%s) (Model: %s)" msgstr "%s କୁ ଚଳାନ୍ତୁ (Geom: %s/%s/%s) (ନମୁନା: %s)" #: ../iw/partition_gui.py:327 #, python-format msgid "Drive %s (%-0.f MB) (Model: %s)" msgstr "%s କୁ ଚଳାନ୍ତୁ (%-0.f ମୋଗା-ବାଇଟ) (ନମୁନା: %s)" #: ../iw/partition_gui.py:372 ../textw/partition_text.py:1424 msgid "Type" msgstr "ପ୍ରକାର" #: ../iw/partition_gui.py:377 ../textw/partition_text.py:1424 msgid "Start" msgstr "ପ୍ରାରମ୍ଭ" #: ../iw/partition_gui.py:378 ../textw/partition_text.py:1424 msgid "End" msgstr "ଶେଷ" #: ../iw/partition_gui.py:415 msgid "" "Mount Point/\n" "RAID/Volume" msgstr "" "ମାଉଣ୍ଟ ବିନ୍ଦୁ/\n" "RAID/ଘନଫଳ" #: ../iw/partition_gui.py:417 msgid "" "Size\n" "(MB)" msgstr "" "ଆକାର\n" "(ମେଗା ବାଇଟ୍)" #: ../iw/partition_gui.py:549 ../textw/partition_text.py:1418 msgid "Partitioning" msgstr "ବିଭାଜନ କରୁଅଛି" #: ../iw/partition_gui.py:640 msgid "The partitioning scheme you requested caused the following critical errors." msgstr "ଆପଣ ଅନୁରୋଧ କରିଥିବା ବିଭାଜନୀୟ ଯୋଜନା ଯୋଗୁଁ ନିମ୍ନଲିଖିତ ଗୁରୁତର ତୃଟି ଗୁଡିକ ଘଟିଲା।" #: ../iw/partition_gui.py:642 #, python-format msgid "You must correct these errors before you continue your installation of %s." msgstr "ଆପଣ ଆପଣଙ୍କ %s ର ସ୍ଥାପନକୁ ଜାରିରଖିବା ପୂର୍ବରୁ ଆପଣ ଏହି ତୃଟି ମାନଙ୍କୁ ସମାଧାନ କରିବା ଉଚିତ।" #: ../iw/partition_gui.py:648 msgid "Partitioning Errors" msgstr "ବିଭାଜନୀୟ ତୃଟି ମାନ" #: ../iw/partition_gui.py:654 msgid "The partitioning scheme you requested generated the following warnings." msgstr "ଆପଣ ଅନୁରୋଧ କରିଥିବା ବିଭାଜନୀୟ ଯୋଜନା ନିମ୍ନଲିଖିତ ଚେତାବନୀ ଦେଲା।" #: ../iw/partition_gui.py:656 msgid "Would you like to continue with your requested partitioning scheme?" msgstr "ଆପଣ ଆପଣଙ୍କ ବିଭାଜନୀୟ ଯୋଜନା ସହିତ ଆଗେଇବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି?" #: ../iw/partition_gui.py:661 msgid "Partitioning Warnings" msgstr "ବିଭାଜନୀୟ ଚେତାବନୀ" #: ../iw/partition_gui.py:683 msgid "Format Warnings" msgstr "ସଂରୂପ ଚେତାବନୀ" #: ../iw/partition_gui.py:688 msgid "_Format" msgstr "ଫର୍ମାଟ କରନ୍ତୁ (_F)" #: ../iw/partition_gui.py:725 msgid "LVM Volume Groups" msgstr "LVM ଘନଫଳ ସମୂହ" #: ../iw/partition_gui.py:766 msgid "RAID Devices" msgstr "RAID ଉପକରଣ ମାନ" #: ../iw/partition_gui.py:796 ../iw/partition_gui.py:933 #: ../textw/partition_text.py:115 ../textw/partition_text.py:179 msgid "None" msgstr "କିଛି ନାହିଁ" #: ../iw/partition_gui.py:818 ../loader/hdinstall.c:231 msgid "Hard Drives" msgstr "ହାର୍ଡ ଡ୍ରାଇଭ" #: ../iw/partition_gui.py:891 ../textw/partition_text.py:161 #: ../textw/partition_text.py:200 msgid "Free space" msgstr "ଖାଲି ସ୍ଥାନ" #: ../iw/partition_gui.py:893 ../textw/partition_text.py:163 msgid "Extended" msgstr "ବିସ୍ତାରିତ" #: ../iw/partition_gui.py:895 ../textw/partition_text.py:165 msgid "software RAID" msgstr "ସଫଟୱେର RAID" #: ../iw/partition_gui.py:935 msgid "Free" msgstr "ମୁକ୍ତ" #: ../iw/partition_gui.py:1028 ../textw/partition_text.py:248 #, python-format msgid "Could not allocate requested partitions: %s." msgstr "ନିବେଦିତ ବିଭାଜନ ମାନଙ୍କୁ ବାଣ୍ଟି ପାରିଲା ନାହିଁ: %s।" #: ../iw/partition_gui.py:1037 #, python-format msgid "Warning: %s." msgstr "ଚେତାବନୀ: %s।" #: ../iw/partition_gui.py:1219 ../iw/partition_gui.py:1233 msgid "Not supported" msgstr "ସମର୍ଥିତ ନୁହେଁ" #: ../iw/partition_gui.py:1220 msgid "LVM is NOT supported on this platform." msgstr "ଏହି ପ୍ଲାଟଫର୍ମ ରେ LVM ସମର୍ଥିତ ନୁହେଁ।" #: ../iw/partition_gui.py:1234 msgid "Software RAID is NOT supported on this platform." msgstr "ଏହି ପ୍ଲାଟଫର୍ମ ରେ ସଫଟୱେର RAID ସମର୍ଥିତ ନୁହେଁ।" #: ../iw/partition_gui.py:1241 msgid "No RAID minor device numbers available" msgstr "କୌଣସି RAID କ୍ଷୁଦ୍ର ଉପକରଣ ସଂଖ୍ଯା ଉପଲବ୍ଧ ନାହିଁ" #: ../iw/partition_gui.py:1242 msgid "" "A software RAID device cannot be created because all of the available RAID " "minor device numbers have been used." msgstr "" "ଗୋଟିଏ ସଫଟୱେର ରେଡ ଉପକରଣକୁ ସୃଷ୍ଟି କରିହେବ ନାହିଁ କାରଣ ସମସ୍ତ ଉପଲବ୍ଧ ରେଡ ନଗନ୍ଯ ଉପକରଣ ସଂଖ୍ଯା " "ମାନଙ୍କୁ ବ୍ଯବହାର କରିସାରିଛି।" #: ../iw/partition_gui.py:1256 msgid "RAID Options" msgstr "RAID ବିକଳ୍ପ" #: ../iw/partition_gui.py:1267 #, python-format msgid "" "Software RAID allows you to combine several disks into a larger RAID " "device. A RAID device can be configured to provide additional speed and " "reliability compared to using an individual drive. For more information on " "using RAID devices please consult the %s documentation.\n" "\n" "You currently have %s software RAID partition(s) free to use.\n" "\n" msgstr "" "ସଫଟୱେର ରେଡ ଏକାଧିକ ଡିସ୍କକୁ ଗୋଟିଏ ବୃହତର ରେଡ ଉପକରଣରେ ସମ୍ମିଳିତ କରିବା ପାଇଁ ଆପଣଙ୍କୁ ଅନୁମତି ପ୍ରଦାନ " "କରିଥାଏ। ଗୋଟିଏ ସ୍ବତନ୍ତ୍ର ଡ୍ରାଇଭ ର ବ୍ଯବହାର ତୁଳନାରେ ଅତିରିକ୍ତ ବେଗ ଏବଂ ବିଶ୍ବସନୀୟତା ପ୍ରଦାନ କରିବା " "ପାଇଁ ଗୋଟିଏ ରେଡ ଉପକରଣକୁ ବିନ୍ଯାସ କରିହେବ। ରେଡ ଉପକରଣର ବ୍ଯବହାର ସମ୍ବନ୍ଧିତ ଅଧିକ ସୂଚନା ପାଇଁ " "ଦୟାକରି %s ଦଲିଲକରଣରେ ଦେଖନ୍ତୁ।\n" "\n" "ଆପମଙ୍କ ନିକଟରେ ବ୍ଯବହାର କରିବା ପାଇଁ ବର୍ତ୍ତମାନ %s ସଫଟୱେର ବିଭାଜନ ମୁକ୍ତ ଅଛି।\n" "\n" #: ../iw/partition_gui.py:1278 msgid "" "To use RAID you must first create at least two partitions of type 'software " "RAID'. Then you can create a RAID device that can be formatted and " "mounted.\n" "\n" msgstr "" "ରେଡ ବ୍ଯବହାର କରିବା ପାଇଁ ଆପଣ ସର୍ବପ୍ରଥମେ ଅତିକମରେ 'ସଫଟୱେର ରେଡ' ପ୍ରକାରର ଦୁଇଟି ବିଭାଜନ ସୃଷ୍ଟି " "କରିବା ଉଚିତ। ତା'ପରେ ଆପଣ ଗୋଟିଏ ରେଡ ଉପକରଣ ସୃଷ୍ଟି କରିପାରିବେ ଯାହାକୁ ସଂରୂପଣ ଏବଂ ମାଉଣ୍ଟ " "କରିହେବ।\n" "\n" #: ../iw/partition_gui.py:1284 msgid "What do you want to do now?" msgstr "ଆପଣ ବର୍ତମାନ କଣ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../iw/partition_gui.py:1293 msgid "Create a software RAID _partition." msgstr "ଗୋଟିଏ ସଫଟୱେରର RAID ପ୍ରତିଛବିକୁ ସୃଷ୍ଟି କରନ୍ତୁ (_p)।" #: ../iw/partition_gui.py:1296 #, python-format msgid "Create a RAID _device [default=/dev/md%s]." msgstr "ଗୋଟିଏ RAID ଉପକରଣ [ପୂର୍ବ ନିର୍ଦ୍ଧାରିତ=/dev/md%s] କୁ ସୃଷ୍ଟି କରନ୍ତୁ (_d)।" #: ../iw/partition_gui.py:1300 #, python-format msgid "Clone a _drive to create a RAID device [default=/dev/md%s]." msgstr "" "ଗୋଟିଏ RAID ଉପକରଣ [ପୂର୍ବ ନିର୍ଦ୍ଧାରିତ=/dev/md%s] କୁ ସୃଷ୍ଟି କରିବା ପାଇଁ ଗୋଟିଏ ଡ୍ରାଇଭ କୁ କ୍ଲୋନ " "କରନ୍ତୁ (_d)।" #: ../iw/partition_gui.py:1339 msgid "Couldn't Create Drive Clone Editor" msgstr "ଡ୍ରାଇଭ କ୍ଲୋନ ସମ୍ପାଦକ କୁ ସୃଷ୍ଟି କରି ପାରିଲା ନାହିଁ।" #: ../iw/partition_gui.py:1340 msgid "The drive clone editor could not be created for some reason." msgstr "କିଛି କାରଣ ବଶତଃ ଡ୍ରାଇଭ କ୍ଲୋନ ସମ୍ପାଦକ କୁ ସୃଷ୍ଟି କରି ପାରିଲା ନାହିଁ।" #: ../iw/partition_gui.py:1382 msgid "Ne_w" msgstr "ନୂତନ (_w)" #: ../iw/partition_gui.py:1385 msgid "Re_set" msgstr "ପୁନଃସ୍ଥାପନ(_s)" #: ../iw/partition_gui.py:1386 msgid "R_AID" msgstr "R_AID" #: ../iw/partition_gui.py:1387 msgid "_LVM" msgstr "_LVM" #: ../iw/partition_gui.py:1428 msgid "Hide RAID device/LVM Volume _Group members" msgstr "RAID ଉପକରଣ/LVM ଘନଫଳ ସମୂହ ସଦସ୍ଯ ମାନଙ୍କୁ ଲୁଚାଇ ରଖନ୍ତୁ (_G)" #: ../iw/partition_ui_helpers_gui.py:102 ../iw/partition_ui_helpers_gui.py:123 #: ../iw/partition_ui_helpers_gui.py:125 ../textw/partition_text.py:271 #: ../textw/partition_text.py:273 ../textw/partition_text.py:275 #: ../textw/partition_text.py:300 msgid "" msgstr "<ପ୍ରଯୁଜ୍ଯ ନୁହେଁ>" #: ../iw/partition_ui_helpers_gui.py:285 msgid "_Format as:" msgstr "ଏଭଳି ଭାବରେ ଫର୍ମାଟ କରନ୍ତୁ (_F):" #: ../iw/partition_ui_helpers_gui.py:308 msgid "Mi_grate filesystem to:" msgstr "କୁ ଫାଇଲ ତନ୍ତ୍ର ଉତ୍ପ୍ରବାସିତ କରନ୍ତୁ (_g):" #: ../iw/partition_ui_helpers_gui.py:328 tmp/autopart.glade.h:9 msgid "_Resize" msgstr "ଆକାର ବଦଳାନ୍ତୁ (_R)" #: ../iw/partition_ui_helpers_gui.py:384 #, python-format msgid "" "Partitions of type '%s' must be constrained to a single drive. To do this, " "select the drive in the 'Allowable Drives' checklist." msgstr "" "ଗୋଟିଏ ଡ୍ରାଇଭରେ '%s' ପ୍ରକାରର ବିଭାଜନ କରିବା ପାଇଁ ଚାପ ପକାନ୍ତୁ। ଏପରି କରିବା ପାଇଁ, 'ସ୍ବୀକାର୍ଯ୍ଯ " "ଡ୍ରାଇଭ' ଯାଞ୍ଚସୂଚୀ ମଧ୍ଯରୁ ଡ୍ରାଇଭ ଚୟନ କରନ୍ତୁ।" #: ../iw/partmethod_gui.py:34 ../textw/partmethod_text.py:32 msgid "Disk Partitioning Setup" msgstr "ଡିସ୍କ ବିଭାଜନ ବ୍ଯବସ୍ଥା" #: ../iw/partmethod_gui.py:59 msgid "_Automatically partition" msgstr "ସ୍ବତଃ ବିଭାଜନ କରନ୍ତୁ (_A)" #: ../iw/partmethod_gui.py:62 msgid "Manually partition with _Disk Druid" msgstr "ଡିସ୍କ ଡୃଇଡ ସହିତ ହସ୍ତକୃତ ଭାବରେ ବିଭାଜନ କରନ୍ତୁ (_D)" #: ../iw/progress_gui.py:37 msgid "Installing Packages" msgstr "ପ୍ଯାକେଜ ମାନଙ୍କୁ ସ୍ଥାପିତ କରୁଅଛି" #: ../iw/raid_dialog_gui.py:272 msgid "" "At least two unused software RAID partitions are needed to create a RAID " "device.\n" "\n" "First create at least two partitions of type \"software RAID\", and then " "select the \"RAID\" option again." msgstr "" "ଗୋଟିଏ ରେଡ ଉପକରଣ ସୃଷ୍ଟି କରିବା ପାଇଁ ଅତିକମରେ ଦୁଇଟି ଅବ୍ଯବହୃତ ସଫଟୱେର ରେଡ ବିଭାଜନ ଆବଶ୍ୟକ।\n" "\n" "ପ୍ରଥମେ ଅତିକମରେ \"ସଫଟୱେର ପ୍ରକାରର\" ଦୁଇଟି ବିଭାଜନ ସୃଷ୍ଟି କରନ୍ତୁ, ଏବଂ ପରେ ପୁନର୍ବାର \"ରେଡ\" " "ବିକଳ୍ପକୁ ଚୟନ କରନ୍ତୁ।" #: ../iw/raid_dialog_gui.py:286 ../iw/raid_dialog_gui.py:719 #: ../textw/partition_text.py:945 msgid "Make RAID Device" msgstr "RAID ଉପକରଣକୁ ତିଆରି କରନ୍ତୁ" #: ../iw/raid_dialog_gui.py:289 #, python-format msgid "Edit RAID Device: /dev/md%s" msgstr "RAID ଉପକରଣକୁ ସମ୍ପାଦିତ କରନ୍ତୁ: /dev/md%s" #: ../iw/raid_dialog_gui.py:291 ../textw/partition_text.py:943 msgid "Edit RAID Device" msgstr "RAID ଉପକରଣକୁ ସମ୍ପାଦିତ କରନ୍ତୁ" #: ../iw/raid_dialog_gui.py:347 msgid "RAID _Device:" msgstr "RAID ଉପକରଣ (_D):" #: ../iw/raid_dialog_gui.py:365 msgid "RAID _Level:" msgstr "RAID ସ୍ତର (_L):" #: ../iw/raid_dialog_gui.py:406 msgid "_RAID Members:" msgstr "_RAID ସଦସ୍ଯ:" #: ../iw/raid_dialog_gui.py:423 msgid "Number of _spares:" msgstr "ଅତିରିକ୍ତ ମାନଙ୍କ ସଂଖ୍ଯା (_s):" #: ../iw/raid_dialog_gui.py:433 msgid "_Format partition?" msgstr "ପ୍ରତିଛବିକୁ ଫର୍ମାଟ କରନ୍ତୁ (_F)?" #: ../iw/raid_dialog_gui.py:520 msgid "" "The source drive has no partitions to be cloned. You must first define " "partitions of type 'software RAID' on this drive before it can be cloned." msgstr "" "ଉତ୍ସ ଡ୍ରାଇଭରେ କ୍ଲୋନ କରିବା ପାଇଁ କୌଣସି ବିଭାଜନ ନାହିଁ। ଏହାକୁ କ୍ଲୋନ କରାଯିବା ପୂର୍ବରୁ ଆପଣ ଏହି " "ତନ୍ତ୍ରରେ 'ସଫଟୱେର ରେଡ' ବିଭାଜନ ପ୍ରକାରକୁ ସର୍ବପ୍ରଥମେ ବ୍ଯାଖ୍ଯା କରିବା ଉଚିତ।" #: ../iw/raid_dialog_gui.py:524 ../iw/raid_dialog_gui.py:530 #: ../iw/raid_dialog_gui.py:542 ../iw/raid_dialog_gui.py:555 msgid "Source Drive Error" msgstr "ଉତ୍ସ ଡ୍ରାଇଭରେ ତୃଟି" #: ../iw/raid_dialog_gui.py:531 msgid "" "The source drive you selected has partitions which are not of type 'software " "RAID'.\n" "\n" "You must remove these partitions before this drive can be cloned. " msgstr "" "ଆପଣ ଚୟନ କରିଥିବା ଉତ୍ସ ଡ୍ରାଇଭରେ ବିଭାଜନ ମାନ ଅଛି ଯାହାକି 'ସଫଟୱେର ରେଡ' ର ପ୍ରକାର ନୁହଁନ୍ତି।\n" "\n" "ଡ୍ରାଇଭକୁ କ୍ଲୋନ କରିବା ପୂର୍ବରୁ ଆପଣ ଏହି ବିଭାଜନ ମାନଙ୍କୁ ଅପସାରଣ କରିବା ଉଚିତ। " #: ../iw/raid_dialog_gui.py:543 #, python-format msgid "" "The source drive you selected has partitions which are not constrained to " "the drive /dev/%s.\n" "\n" "You must remove these partitions or restrict them to this drive before this " "drive can be cloned. " msgstr "" "ଆପଣ ଚୟନ କରିଥିବା ଉତ୍ସ ଡ୍ରାଇଭରେ ବିଭାଜନ ମାନ ଅଛି ଯାହାକି /dev/%s ପାଇଁ ଉଦ୍ଦିଷ୍ଟ ନୁହେଁ।\n" "\n" "ଡ୍ରାଇଭକୁ କ୍ଲୋନ କରିବା ପୂର୍ବରୁ ଆପଣ ଏହି ଡ୍ରାଇଭରୁ ଏହି ବିଭାଜନ ମାନଙ୍କୁ ଅପସାରଣ କିମ୍ବା ନିଷେଧ କରାଯିବା " "ଉଚିତ।" #: ../iw/raid_dialog_gui.py:556 msgid "" "The source drive you selected has software RAID partition(s) which are " "members of an active software RAID device.\n" "\n" "You must remove these partitions before this drive can be cloned." msgstr "" "ଆପଣ ଚୟନ କରିଥିବା ଉତ୍ସ ଡ୍ରାଇଭରେ ସଫଟୱେର ରେଡ ବିଭାଜନ (ମାନ) ଅଛି ଯାହା ଗୋଟିଏ ସକ୍ରିୟ ସଫଟୱେର " "ରେଡ ଉପକରଣର ସଦସ୍ଯ ଅଟନ୍ତି।\n" "\n" "ଡ୍ରାଇଭକୁ କ୍ଲୋନ କରାଯିବା ପୂର୍ବରୁ ଆପଣ ଏହି ବିଭାଜନ ମାନଙ୍କୁ ଅପସାରଣ କରିବା ଉଚିତ।" #: ../iw/raid_dialog_gui.py:569 ../iw/raid_dialog_gui.py:575 #: ../iw/raid_dialog_gui.py:594 msgid "Target Drive Error" msgstr "ଲକ୍ଷସ୍ଥ ଡ୍ରାଇଭ ତୃଟି" #: ../iw/raid_dialog_gui.py:570 msgid "Please select the target drives for the clone operation." msgstr "ଦୟାକରି କ୍ଲୋନ ପ୍ରକ୍ରିୟା ପାଇଁ ଗୋଟିଏ ଲକ୍ଷସ୍ଥ ଡ୍ରାଇଭ ର ଚୟନ କରନ୍ତୁ।" #: ../iw/raid_dialog_gui.py:576 #, python-format msgid "The source drive /dev/%s cannot be selected as a target drive as well." msgstr "ଉତ୍ସ ଡ୍ରାଇଭ /dev/%s କୁ ଗୋଟିଏ ଲକ୍ଷ୍ଯ ଡ୍ରାଇଭ ଭାବରେ ମଧ୍ଯ ଚଯନ କରିହେବ ନାହିଁ।" #: ../iw/raid_dialog_gui.py:595 #, python-format msgid "" "The target drive /dev/%s has a partition which cannot be removed for the " "following reason:\n" "\n" "\"%s\"\n" "\n" "You must remove this partition before this drive can be a target." msgstr "" "ଲକ୍ଷ୍ଯ ଡ୍ରାଇଭ /dev/%s ର ଗୋଟିଏ ବିଭାଜନ ଅଛି ଯାହାକୁ ନିମ୍ନଲିଖିତ କାରଣ ବଶତଃ ଅପସାରଣ କରିହେବ ନାହିଁ:\n" "\n" "\"%s\"\n" "\n" "ଡ୍ରାଇଭକୁ ଲକ୍ଷ୍ଯ କରିବା ପୂର୍ବରୁ ଆପଣ ଏହି ବିଭାଜନକୁ ଅପସାରଣ କରିବା ଉଚିତ।" #: ../iw/raid_dialog_gui.py:656 msgid "Please select a source drive." msgstr "ଦୟାକରି ଗୋଟିଏ ଉତ୍ସ ଡ୍ରାଇଭ ର ଚୟନ କରନ୍ତୁ।" #: ../iw/raid_dialog_gui.py:676 #, python-format msgid "" "The drive /dev/%s will now be cloned to the following drives:\n" "\n" msgstr "" "/dev/%s ଡ୍ରାଇଭଟି ନିମ୍ନଲିଖିତ ଡ୍ରାଇଭରେ ବର୍ତ୍ତମାନ କ୍ଲୋନ କରାଯିବ:\n" "\n" #: ../iw/raid_dialog_gui.py:681 msgid "" "\n" "\n" "WARNING! ALL DATA ON THE TARGET DRIVES WILL BE DESTROYED." msgstr "" "\n" "\n" "ଚେତାବନୀ! ଲକ୍ଷ ଡ୍ରାଇଭ ରେ ସମସ୍ତ ତଥ୍ଯ ନଷ୍ଟ ହୋଇଯିବ।" #: ../iw/raid_dialog_gui.py:684 msgid "Final Warning" msgstr "ଅନ୍ତିମ ଚେତାବନୀ" #: ../iw/raid_dialog_gui.py:686 msgid "Clone Drives" msgstr "ଡ୍ରାଇଭ ମାନଙ୍କ ର କ୍ଲୋନ ପ୍ରସ୍ତୁତ କରନ୍ତୁ" #: ../iw/raid_dialog_gui.py:695 msgid "There was an error clearing the target drives. Cloning failed." msgstr "ଲକ୍ଷସ୍ଥ ଡ୍ରାଇଭ ମାନଙ୍କୁ ସଫା କରିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିଲିଖିତ ହେଲା। କ୍ଲୋନିଙ୍ଗ ବିଫଳ ହୋଇଗଲା।" #: ../iw/raid_dialog_gui.py:729 msgid "" "Clone Drive Tool\n" "\n" "This tool allows you to significantly reduce the amount of effort required " "to setup RAID arrays. This tool uses a source drive which has been prepared " "with the desired partitioning layout, and clones this layout onto other " "similar sized drives. Then a RAID device can be created.\n" "\n" "NOTE: The source drive must have partitions which are restricted to be on " "that drive only, and can only contain unused software RAID partitions. " "Other partition types are not allowed.\n" "\n" "EVERYTHING on the target drive(s) will be destroyed by this process." msgstr "" "କ୍ଲୋନ ଡ୍ରାଇଭ ଉପକରଣ\n" "\n" "ରେଡ ଆରେର ବ୍ଯବସ୍ଥାପନ ପାଇଁ ଆବଶ୍ୟକ ଉଦ୍ଯମକୁ ଉଲ୍ଲେଖନୀୟ ଭାବରେ ହ୍ରାସ କରିବା ପାଇଁ ଏହି ଉପକରଣଟି " "ଆପଣଙ୍କୁ ଅନୁମତି ପ୍ରଦାନ କରିଥାଏ। ଏହି ଉପକରଣ ଗୋଟିଏ ଉତ୍ସ ଡ୍ରାଇଭ ବ୍ଯବହାର କରିଥାଏ ଯାହାକୁ ଆବଶ୍ଯକ " "ବିଭାଜନୀୟ ବିନ୍ଯାସ ସହିତ ପ୍ରସ୍ତୁତ କରାଯାଇଛି, ଏବଂ ଏହି ବିନ୍ଯାସକୁ ଅନ୍ଯାନ୍ଯ ସମାନ ଆକାରର ଡ୍ରାଇଭ " "ମାନଙ୍କରେ କ୍ଲୋନ କରାଯାଇଛି। ତା'ପରେ ଗୋଟିଏ ରେଡ ଉପକରଣକୁ ସୃଷ୍ଟି କରିହେବ।\n" "\n" "ଟିପ୍ପଣୀ: ଉତ୍ସ ଡ୍ରାଇଭରେ ଏପରି ବିଭାଜନ ରହିବା ଉଚିତ ଯାହାକି କେବଳ ସେହି ଡ୍ରାଇଭ ପାଇଁ ଉଦ୍ଦିଷ୍ଟ, ଏବଂ " "କେବଳ ଅବ୍ଯବହୃତ ସଫଟୱେର ରେଡ ବିଭାଜନକୁ ଧାରଣ କରିପାରିବ। ଅନ୍ଯାନ୍ଯ ବିଭାଜନ ପ୍ରକାର ଗୁଡିକ ଗ୍ରହଣୀୟ " "ନୁହଁନ୍ତି। \n" "ଏହି ପ୍ରକ୍ରିୟା ଦ୍ବାରା ଲକ୍ଷ୍ଯ ଡ୍ରାଇଭରେ (ମାନଙ୍କରେ) ସବୁକିଛି ନଷ୍ଟ ହୋଇଯିବ।" #: ../iw/raid_dialog_gui.py:749 msgid "Source Drive:" msgstr "ଉତ୍ସ ଡ୍ରାଇଭ:" #: ../iw/raid_dialog_gui.py:757 msgid "Target Drive(s):" msgstr "ଲକ୍ଷସ୍ଥ ଡ୍ରାଇଭ(ମାନ):" #: ../iw/raid_dialog_gui.py:765 msgid "Drives" msgstr "ଡ୍ରାଇଭ" #: ../iw/task_gui.py:48 #, python-format msgid "" "Unable to read package metadata from repository. This may be due to a " "missing repodata directory. Please ensure that your repository has been " "correctly generated.\n" "\n" "%s" msgstr "" "ଭଣ୍ଡାରରୁ ପ୍ଯାକେଜ ଅଧିତଥ୍ଯକୁ ପଢିବାରେ ଅସମର୍ଥ। ଏହା ସମ୍ଭବତଃ ଅନୁପସ୍ଥିତ ରିପୋ-ଡାଟା ପାଇଁ " "ହୋଇଥାଇପାରେ। ଦୟାକରି ଏହା ନିଶ୍ଚିତ କରନ୍ତୁ ଯେ ଆପଣଙ୍କ ଭଣ୍ଡାରକୁ ସଠିକ ଭାବରେ ସୃଷ୍ଟି କରାଯାଇଛି।\n" "\n" "%s" #: ../iw/task_gui.py:146 #, python-format msgid "" "The repository %s has already been added. Please choose a different " "repository name and URL." msgstr "" "\"%s\" ଭଣ୍ଡାରକୁ ପୂର୍ବରୁ ଯୋଗ କରାଯାଇଛି। ଦୟାକରି ଗୋଟିଏ ଭିନ୍ନ ଭଣ୍ଡାର ନାମ ଏବଂ ୟୁ.ଆର.ଏଲ. ଚୟନ " "କରନ୍ତୁ।" #: ../iw/task_gui.py:159 msgid "Edit Repository" msgstr "ସଂଗ୍ରହାଳୟକୁ ସମ୍ପାଦନ କରନ୍ତୁ" #: ../iw/task_gui.py:221 msgid "Invalid Proxy URL" msgstr "ଅବୈଧ ଛାୟା URL" #: ../iw/task_gui.py:222 msgid "You must provide an HTTP, HTTPS, or FTP URL to a proxy." msgstr "ଆପଣ ଛାୟାକୁ ଗୋଟିଏ HTTP, HTTPS, କିମ୍ବା FTP URL ପ୍ରଦାନ କରିବା ଉଚିତ।" #: ../iw/task_gui.py:232 ../iw/task_gui.py:370 msgid "Invalid Repository URL" msgstr "ଅବୈଧ ଭଣ୍ଡାର URL" #: ../iw/task_gui.py:233 ../iw/task_gui.py:371 msgid "You must provide an HTTP, HTTPS, or FTP URL to a repository." msgstr "ଆପଣ ଭଣ୍ଡାରକୁ ଗୋଟିଏ HTTP, HTTPS, କିମ୍ବା FTP URL ପ୍ରଦାନ କରିବା ଉଚିତ।" #: ../iw/task_gui.py:255 ../iw/task_gui.py:380 msgid "No Media Found" msgstr "କୌଣସି ସଞ୍ଚାର ମାଧ୍ଯମ ମିଳିଲା ନାହିଁ" #: ../iw/task_gui.py:256 ../iw/task_gui.py:381 msgid "" "No installation media was found. Please insert a disc into your drive and " "try again." msgstr "" "କୌଣସି ସ୍ଥାପନ ସଞ୍ଚାର ମାଧ୍ଯମ ମିଳିଲା ନାହିଁ. ଦୟାକରି ଆପଣଙ୍କର ଡ୍ରାଇଭରେ ଗୋଟିଏ ଡିସ୍କ ଭର୍ତ୍ତିକରନ୍ତୁ ଏବଂ " "ପୁଣି ଚେଷ୍ଟାକରନ୍ତୁ." #: ../iw/task_gui.py:275 ../iw/task_gui.py:397 msgid "Please enter an NFS server and path." msgstr "ଦୟାକରି ଗୋଟିଏ NFS ସର୍ଭର ଏବଂ ପଥ ଭରଣ କରନ୍ତୁ." #: ../iw/task_gui.py:307 msgid "Invalid Repository Name" msgstr "ଅବୈଧ ଭଣ୍ଡାର ନାମ" #: ../iw/task_gui.py:308 msgid "You must provide a repository name." msgstr "ଆପଣ ଗୋଟିଏ ଭଣ୍ଡାର ନାମକୁ ପ୍ରଦାନ କରିବା ଉଚିତ।" #: ../iw/task_gui.py:432 tmp/addrepo.glade.h:3 msgid "Add Repository" msgstr "ସଂଗ୍ରହାଳୟକୁ ଯୋଗ କରନ୍ତୁ" #: ../iw/task_gui.py:437 msgid "No Software Repos Enabled" msgstr "କୌଣସି ସଫ୍ଟୱେର ସଂଗ୍ରହାଳୟକୁ ସକ୍ରିୟକରାଯାଇ ନାହିଁ" #: ../iw/task_gui.py:438 msgid "" "You must have at least one software repository enabled to continue " "installation." msgstr "" "ସ୍ଥାପନ କ୍ରିୟା ଚାଲୁରଖିବା ପାଇଁ ଆପଣଙ୍କ ପାଖରେ ଅତିକମରେ ଗୋଟିଏ ସଫ୍ଟୱେର ସଂଗ୍ରହାଳୟ ସକ୍ରିୟ ଥିବା " "ଆବଶ୍ୟକ." #: ../iw/timezone_gui.py:63 ../textw/timezone_text.py:96 msgid "Time Zone Selection" msgstr "ସମୟ ମଣ୍ଡଳ ର ଚୟନ" #: ../iw/upgrade_bootloader_gui.py:36 ../textw/upgrade_bootloader_text.py:135 msgid "Upgrade Boot Loader Configuration" msgstr "ବୁଟ-ଲୋଡର ବିନ୍ଯାସ ର ଉନ୍ନୟନ କରନ୍ତୁ" #: ../iw/upgrade_bootloader_gui.py:122 msgid "_Update boot loader configuration" msgstr "ବୁଟ-ଲୋଡର ବିନ୍ଯାସକୁ ଅଦ୍ଯତିତ କରନ୍ତୁ (_U)" #: ../iw/upgrade_bootloader_gui.py:123 msgid "This will update your current boot loader." msgstr "ଏହା ପ୍ରଚଳିତ ବୁଟ-ଲୋଡର କୁ ଅଦ୍ଯତିତ କରିବ।" #: ../iw/upgrade_bootloader_gui.py:127 ../textw/upgrade_bootloader_text.py:107 msgid "" "Due to system changes, your boot loader configuration can not be " "automatically updated." msgstr "ତନ୍ତ୍ରରେ କିଛି ପରିବର୍ତ୍ତନ ଯୋଗୁଁ, ଆପଣଙ୍କ ବୁଟ-ଲୋଡର ବିନ୍ଯାସକୁ ସ୍ବତଃ ଅଦ୍ଯତିତ କରିହେବ ନାହିଁ।" #: ../iw/upgrade_bootloader_gui.py:130 ../textw/upgrade_bootloader_text.py:111 msgid "" "The installer is unable to detect the boot loader currently in use on your " "system." msgstr "ଆପଣଙ୍କ ତନ୍ତ୍ରରେ ବର୍ତ୍ତମାନ ବ୍ଯବହୃତ ହେଉଥିବା ବୁଟ-ଲୋଡରକୁ ସ୍ଥାପକ ଖୋଜିବାରେ ଅସମର୍ଥ।" #: ../iw/upgrade_bootloader_gui.py:137 ../textw/upgrade_bootloader_text.py:120 #, python-format msgid "The installer has detected the %s boot loader currently installed on %s." msgstr "ସ୍ଥାପକ ଟି %s ବୁଟ-ଲୋଡର କୁ ଖୋଜି ପାରିଲା ଯାହାକି %s ରେ ବର୍ତମାନ ସ୍ଥାପିତ ହୋଇଅଛି।" #: ../iw/upgrade_bootloader_gui.py:141 msgid "This is the recommended option." msgstr "ଏହା ଗ୍ରହଣୀୟ ବିକଳ୍ପ ଅଟେ।" #: ../iw/upgrade_bootloader_gui.py:146 msgid "_Create new boot loader configuration" msgstr "ନୂତନ ବୁଟ-ଲୋଡର ବିନ୍ଯାସ କୁ ସୃଷ୍ଟି କରନ୍ତୁ (_C)" #: ../iw/upgrade_bootloader_gui.py:148 msgid "" "This option creates a new boot loader configuration. If you wish to switch " "boot loaders, you should choose this." msgstr "" "ଏହି ବିକଳ୍ପ ଗୋଟିଏ ନୂତନ ବୁଟ ଲୋଡର ବିନ୍ୟାସ ସୃଷ୍ଟି କରିଥାଏ। ଯଦି ଆପଣ ବୁଟ ଲୋଡର ମାନଙ୍କୁ ପରିବର୍ତ୍ତନ କରିବା " "ପାଇଁ ଚାହୁଁଛନ୍ତି, ତାହାହେଲେ ଆପଣ ଏହାକୁ ଚୟନ କରିବା ଉଚିତ।" #: ../iw/upgrade_bootloader_gui.py:155 msgid "_Skip boot loader updating" msgstr "ବୁଟ-ଲୋଡର ଅଦ୍ଯତନ କୁ ଛାଡି ଦିଅନ୍ତୁ (_S)" #: ../iw/upgrade_bootloader_gui.py:156 msgid "" "This option makes no changes to boot loader configuration. If you are using " "a third party boot loader, you should choose this." msgstr "" "ଏହି ବିକଳ୍ପ ଗୋଟିଏ ନୂତନ ବୁଟ ଲୋଡର ବିନ୍ୟାସ ସୃଷ୍ଟି କରିଥାଏ। ଯଦି ଆପଣ ଗୋଟିଏ ତୃତୀୟ ପକ୍ଷ ବୁଟ ଲୋଡର " "ବ୍ଯବହାର କରୁଛନ୍ତିିବା ପାଇଁ ଚାହୁଁଛନ୍ତି, ତାହାହେଲେ ଆପଣ ଏହାକୁ ଚୟନ କରିବା ଉଚିତ।" #: ../iw/upgrade_bootloader_gui.py:167 msgid "What would you like to do?" msgstr "ଆପଣ କଣ କରିବା ପାଇଁ ଚାହାଁନ୍ତି?" #: ../iw/upgrade_migratefs_gui.py:34 ../textw/upgrade_text.py:37 msgid "Migrate File Systems" msgstr "ଫାଇଲ ତନ୍ତ୍ରକୁ ଉତ୍ପ୍ରବାସିତ କରନ୍ତୁ" #: ../iw/upgrade_migratefs_gui.py:64 #, python-format msgid "" "This release of %s supports an updated file system, which has several " "benefits over the file system traditionally shipped in %s. This " "installation program can migrate formatted partitions without data loss.\n" "\n" "Which of these partitions would you like to migrate?" msgstr "" "%s ର ଏହି ସଂସ୍କରଣ ଅଦ୍ୟତିତ ଫାଇଲ ତନ୍ତ୍ରକୁ ସମର୍ଥ କରିଥାଏ, ଯାହାର %s ରେ ପାରମ୍ପରିକ ଭାବରେ " "ପଠାଯାଇଥିବା ଫାଇଲ ତନ୍ତ୍ର ଅପେକ୍ଷା ଅଧିକ ଉପଯୋଗୀତା ଅଛି। ଏହି ସ୍ଥାପନ ପ୍ରୋଗ୍ରାମ ସଂରୂପୀତ ବିଭାଜନ " "ମାନଙ୍କୁ ବିନା ତଥ୍ଯ ହାନିରେ ଉପ୍ରବାସିତ କରିପାରିବ।\n" "\n" "ଏହି ବିଭାଜନ ମାନଙ୍କ ମଧ୍ଯରୁ ଆପଣ କାହାକୁ ଉପ୍ରବାସନ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../iw/upgrade_swap_gui.py:35 msgid "Upgrade Swap Partition" msgstr "swap ବିଭାଜନ ର ଉନ୍ନୟନ କରନ୍ତୁ" #: ../iw/upgrade_swap_gui.py:95 ../textw/upgrade_text.py:103 #, python-format msgid "" "Recent kernels (2.4 or newer) need significantly more swap than older " "kernels, up to twice the amount of RAM on the system. You currently have %" "dMB of swap configured, but you may create additional swap space on one of " "your file systems now." msgstr "" "ପୁରାତନ କର୍ଣ୍ଣଲ ତୁଳନାରେ ଆଧୁନିକ (2.4 କିମ୍ବା ନବୀନତମ) କର୍ଣ୍ଣଲ ଉଲ୍ଲେଖନୀୟ ଭାବରେ ତନ୍ତ୍ରରେ ଥିବା " "RAM ର ଦୁଇଗୁଣ swap ସ୍ଥାନ ଆବଶ୍ୟକ କରିଥାଏ। ଆପଣଙ୍କ ନିକଟରେ ବର୍ତ୍ତମାନ %d ମେଗା-ବାଇଟ swap " "ବିନ୍ଯାସ କରାଯାଇଛି, କିନ୍ତୁ ଆପଣ ବର୍ତ୍ତମାନ ଆପମଙ୍କ ଫାଇଲ ତନ୍ତ୍ରରେ ଅତିରିକ୍ତ swap ସ୍ଥାନ ସୃଷ୍ଟି କରିପାରିବେ।" #: ../iw/upgrade_swap_gui.py:102 #, python-format msgid "" "\n" "\n" "The installer has detected %s MB of RAM.\n" msgstr "" "\n" "\n" "ସ୍ଥାପକ ଟି RAM ର %s ମେଗା ବାଇଟ୍ କୁ ଖୋଜି ପାରିଲା।\n" #: ../iw/upgrade_swap_gui.py:114 msgid "I _want to create a swap file" msgstr "ମୁଁ swap ଫାଇଲ ସୃଷ୍ଟି କରିବା ପାଇଁ ଚାହୁଁଅଛି (_w)" #: ../iw/upgrade_swap_gui.py:123 msgid "Select the _partition to put the swap file on:" msgstr "swap ଫାଇଲ କୁ ରଖିବା ପାଇଁ ବିଭାଜନ ର ଚୟନ କରନ୍ତୁ (_p):" #: ../iw/upgrade_swap_gui.py:142 ../textw/upgrade_text.py:121 msgid "Partition" msgstr "ବିଭାଜନ" #: ../iw/upgrade_swap_gui.py:142 msgid "Free Space (MB)" msgstr "ଖାଲି ସ୍ଥାନ (ମେଗା ବାଇଟ୍)" #: ../iw/upgrade_swap_gui.py:160 #, python-format msgid "" "A minimum swap file size of %d MB is recommended. Please enter a size for " "the swap file:" msgstr "" "swap ଫାଇଲର ଗୋଟିଏ ସର୍ବନିମ୍ନ %d ମେଗା-ବାଇଟ ପରାମର୍ଶିତ। ଦୟାକରି swap ଫାଇଲ ପାଇଁ ଗୋଟିଏ ଆକାର " "ଭରଣ କରନ୍ତୁ:" #: ../iw/upgrade_swap_gui.py:175 msgid "Swap file _size (MB):" msgstr "swap ଫାଇଲ ର ଆକାର (ମେଗା ବାଇଟ୍) (_s):" #: ../iw/upgrade_swap_gui.py:185 msgid "I _don't want to create a swap file" msgstr "ମୁଁ swap ଫାଇଲ ସୃଷ୍ଟି କରିବା ପାଇଁ ଚାହୁଁନାହିଁ (_d)" #: ../iw/upgrade_swap_gui.py:195 msgid "" "A swap file is strongly recommended. Failure to create one could cause the " "installer to abort abnormally. Are you sure you wish to continue?" msgstr "" "ଗୋଟିଏ swap ଫାଇଲ ବିଶେଷ ଭାବରେ ପରାମର୍ଶିତ ଅଟେ। ଏହାକୁ ସୃଷ୍ଟି କରିବାରେ ବିଫଳ ହେଲେ ସ୍ଥାପକଟି " "ଅପ୍ରତ୍ଯାଶିତ ଭାବରେ ବନ୍ଦ ହୋଇଯିବ। ଆପଣ ନିଶ୍ଚିତ କି ଆପଣ ଜାରି ରଖିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../iw/upgrade_swap_gui.py:203 ../textw/upgrade_text.py:187 msgid "The swap file must be between 1 and 2000 MB in size." msgstr "swap ଫାଇଲ ର ଆକାର ୧ ଏବଂ ୨୦୦୦ ମେଗା ବାଇଟ୍ ମଧ୍ଯରେ ରହିବା ଉଚିତ।" #: ../iw/upgrade_swap_gui.py:210 ../textw/upgrade_text.py:182 msgid "There is not enough space on the device you selected for the swap partition." msgstr "swap ବିଭାଜନ ପାଇଁ ଆପଣ ଚୟିତ କରିଥିବା ଉପକରଣରେ ଯଥେଷ୍ଟ ସ୍ଥାନ ନାହିଁ।" #: ../iw/zipl_gui.py:37 msgid "z/IPL Boot Loader Configuration" msgstr "z/IPL ବୁଟ-ଲୋଡର ବିନ୍ଯାସ" #: ../iw/zipl_gui.py:61 msgid "The z/IPL boot loader will be installed on your system." msgstr "z/IPL ବୁଟ-ଲୋଡର ଟି ଆପଣଙ୍କ ତନ୍ତ୍ରରେ ସ୍ଥାପିତ ହେବ।" #: ../iw/zipl_gui.py:63 msgid "" "The z/IPL Boot Loader will now be installed on your system.\n" "\n" "The root partition will be the one you selected previously in the partition " "setup.\n" "\n" "The kernel used to start the machine will be the one to be installed by " "default.\n" "\n" "If you wish to make changes later after the installation feel free to change " "the /etc/zipl.conf configuration file.\n" "\n" "You can now enter any additional kernel parameters which your machine or " "your setup may require." msgstr "" "z/IPL ବୁଟ-ଲୋଡରକୁ ବର୍ତ୍ତମାନ ଆପଣଙ୍କ ତନ୍ତ୍ରରେ ସ୍ଥାପନ କରାଯିବ।\n" "\n" "ବିଭାଜନ ବ୍ଯବସ୍ଥାପନରେ ପୂର୍ବ ଚୟିତ ବିଭାଜନଟି ରୁଟ ବିଭାଜନ ଭାବରେ କାର୍ଯ୍ଯ କରିବ।\n" "\n" "ତନ୍ତ୍ରକୁ ପ୍ରାରମ୍ଭ କରିବା ସମୟରେଇଁ ବ୍ଯବହୃତ କର୍ଣ୍ଣଲକୁ ପୂର୍ବନିର୍ଦ୍ଧାରିତ ଭାବରେ ସ୍ଥାପନ କରାଯିବ।\n" "\n" "ଯଦି ଆପଣ ସ୍ଥାପନ ପରେ ପରିବର୍ତ୍ତନ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି, ତାହାହେଲେ କୁଣ୍ଠା ନକରି /etc/zipl.conf " "ବିନ୍ଯାସ ଫାଇଲରେ ପରିବର୍ତ୍ତନ କରନ୍ତୁ।\n" "\n" " ଆପଣଙ୍କ ମେସିନ କିମ୍ବା ବ୍ଯବସ୍ଥାପନ ଆବଶ୍ୟକ କରୁଥିବା ଅତିରିକ୍ତ କର୍ଣ୍ଣଲ ପାରାମିଟରକୁ ଆପଣ ବର୍ତ୍ତମାନ ଭରଣ " "କରିପାରିବେn" #: ../iw/zipl_gui.py:90 ../textw/zipl_text.py:71 msgid "Kernel Parameters" msgstr "କର୍ଣ୍ଣଲ ପାରାମିଟର" #: ../iw/zipl_gui.py:93 ../iw/zipl_gui.py:96 msgid "Chandev Parameters" msgstr "ଚେନଡେଭ ପାରାମିଟର" #: ../textw/bootloader_text.py:32 msgid "Which boot loader would you like to use?" msgstr "ଆପଣ କେଉଁ ବୁଟ-ଲୋଡର କୁ ବ୍ଯବହାର କରିବା ପାଇଁ ଚାହିଁବେ?" #: ../textw/bootloader_text.py:42 msgid "Use GRUB Boot Loader" msgstr "GRUB ବୁଟ-ଲୋଡର କୁ ବ୍ଯବହାର କରନ୍ତୁ" #: ../textw/bootloader_text.py:43 msgid "No Boot Loader" msgstr "କୌଣସି ବୁଟ-ଲୋଡର ନାହିଁ" #: ../textw/bootloader_text.py:63 msgid "Skip Boot Loader" msgstr "ବୁଟ-ଲୋଡର କୁ ଛାଡି ଦିଅନ୍ତୁ" #: ../textw/bootloader_text.py:64 msgid "" "You have elected not to install any boot loader, which is not recommended " "unless you have an advanced need. Booting your system into Linux directly " "from the hard drive almost always requires a boot loader.\n" "\n" "Are you sure you want to skip boot loader installation?" msgstr "" "କୌଣସି ବୁଟ-ଲୋଡରକୁ ସ୍ଥାପନ ନ କରିବା ପାଇଁ ଆପଣ ଚୟନ କରିଛନ୍ତି, ଅତ୍ଯନ୍ତ ଆବଶ୍ଯକ ନ ହେବା ପର୍ଯ୍ଯନ୍ତ ଏହା " "ପରାମର୍ଶିତ ନୁହେଁ। ହାର୍ଡ ଡ୍ରାଇଭରୁ ସିଧାସଳଖ ଭାବରେ ଆପଣଙ୍କ ତନ୍ତ୍ରକୁ Linux ରେ ପୁନର୍ଚାଳନ କରିବା ପାଇଁ " "ପ୍ରାୟତଃ ସର୍ବଦା ଗୋଟିଏ ବୁଟ-ଲୋଡର ଆବଶ୍ୟକ।\n" "\n" "ଆପଣ ନିଶ୍ଚିତ କି ଆପଣ ବୁଟ-ଲୋଡର ସ୍ଥାପନକୁ ଆଗ୍ରହ୍ଯ କରିଦେବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../textw/bootloader_text.py:96 msgid "" "A few systems need to pass special options to the kernel at boot time to " "function properly. If you need to pass boot options to the kernel, enter " "them now. If you don't need any or aren't sure, leave this blank." msgstr "" "କିଛି ତନ୍ତ୍ର ବୁଟ ସମୟରେ ତନ୍ତ୍ରର ସଠିକ ଚାଳନା ପାଇଁ ବିଶେଷ ବିକଳ୍ପ ମାନଙ୍କୁ କର୍ଣ୍ଣଲକୁ ପଠାଇବା ଉଚିତ। ଯଦି " "ଆପଣ ବୁଟ ବିକଳ୍ପ ମାନଙ୍କୁ କର୍ଣ୍ଣଲକୁ ପଠାଇବା ପାଇଁ ଚାହୁଁଛନ୍ତି, ତାହାହେଲେ ସେଗୁଡିକୁ ବର୍ତ୍ତମାନ ଭରଣ କରନ୍ତୁ। " "ଯଦି ଆପଣ ଏହା ଆବଶ୍ୟକ କରୁନାହାଁନ୍ତି କିମ୍ବା ନିଶ୍ଚିତ ନୁହଁନ୍ତି, ତାହାହେଲେ ଏହିକୁ ଖାଲି ଛାଡନ୍ତୁ।" #: ../textw/bootloader_text.py:105 msgid "Force use of LBA32 (not normally required)" msgstr "LBA32 କୁ ବଳ ପୂର୍ବକ ବ୍ଯବହାର କରନ୍ତୁ (ସାଧାରଣତଃ ଆବଶ୍ୟକ ହୋଇ ନଥାଏ)" #: ../textw/bootloader_text.py:128 msgid "" "If LBA32 is not supported by your system's BIOS, forcing its use can prevent " "your machine from booting.\n" "\n" "Would you like to continue and force LBA32 mode?" msgstr "" "LBA32 ଆପଣଙ୍କ ତନ୍ତ୍ରର BIOS ଦ୍ବାରା ସମର୍ଥିତ ହୋଇ ନ ଥିଲେ, ଏହାର ବଳପୂର୍ବକ ବ୍ଯବହାର ଆପଣଙ୍କ ତନ୍ତ୍ରକୁ " "ବୁଟ ହେବାରୁ ଅଟକାଇ ପାରେ।\n" "\n" "ଆପଣ ଜାରି ରଖିବା ପାଇଁ ଚାହାଁନ୍ତି କି ଏବଂ LBA32 ଧାରାକୁ ବଳପ୍ରୟୋଗ କରି ଚଳାଇବା ପାଇଁ ଚାହାଁନ୍ତି କି?" #: ../textw/bootloader_text.py:169 msgid "Where do you want to install the boot loader?" msgstr "ଆପଣ କେଉଁଠାରେ ବୁଟ-ଲୋଡର କୁ ସ୍ଥାପିତ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../textw/bootloader_text.py:197 ../textw/bootloader_text.py:262 msgid "Boot label" msgstr "ବୁଟ ସୂଚକ" #: ../textw/bootloader_text.py:201 msgid "Clear" msgstr "ସଫା କରନ୍ତୁ" #: ../textw/bootloader_text.py:209 msgid "Edit Boot Label" msgstr "ବୁଟ ସୂଚକ ର ଅଦ୍ଯତନ କରନ୍ତୁ" #: ../textw/bootloader_text.py:227 ../textw/bootloader_text.py:232 msgid "Invalid Boot Label" msgstr "ଅବୈଧ ବୁଟ ସୂଚକ" #: ../textw/bootloader_text.py:228 msgid "Boot label may not be empty." msgstr "ବୁଟ ସୂଚକ ଟି ଖାଲି ହୋଇ ନପାରେ।" #: ../textw/bootloader_text.py:233 msgid "Boot label contains illegal characters." msgstr "ବୁଟ ସୂଚକ ଅବୈଧ ଅକ୍ଷର ମାନଙ୍କୁ ଧାରଣ କରିଅଛି।" #: ../textw/bootloader_text.py:281 #, python-format msgid "" "The boot manager %s uses can boot other operating systems as well. Please " "tell me what partitions you would like to be able to boot and what label you " "want to use for each of them." msgstr "" "%s ବୁଟ ପରିଚାଳକ ପ୍ରୟୋଗ ଅନ୍ଯ ପ୍ରଚାଳନ ତନ୍ତ୍ରମାନଙ୍କୁ ମଧ୍ଯ ବୁଟ କରିପାରିବ। ଦୟାକରି ମୋତେ କୁହନ୍ତୁ ଯେ " "ଆପଣ କେଉଁ ବିଭାଜନକୁ ବୁଟ କରିବାରେ ସମର୍ଥ ହୋଇପାରିବେ ଏବଂ ପ୍ରତ୍ଯେକ ପାଇଁ କେଉଁ ସୂଚକ ଆପଣ ବ୍ଯବହାର " "କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି।" #: ../textw/bootloader_text.py:294 msgid " select | select default | delete | next screen>" msgstr "" " ଚୟନ କରନ୍ତୁ | ପୂର୍ବ ନିର୍ଦ୍ଧାରିତ କୁ ଚୟନ କରନ୍ତୁ | ଅପସାରଣ କରନ୍ତୁ | " "ପରବର୍ତ୍ତୀ ପରଦା>" #: ../textw/bootloader_text.py:390 msgid "" "A boot loader password prevents users from passing arbitrary options to the " "kernel. For highest security, you should set a password, but a password is " "not necessary for more casual users." msgstr "" "ଗୋଟିଏ ବୁଟ-ଲୋଡର ପ୍ରବେଶ ସଙ୍କେତ ଚାଳକ ଦ୍ବାରା କର୍ଣ୍ଣଲକୁ ଅନିୟନ୍ତ୍ରିତ ବିକଳ୍ପ ପଠାଇବାରୁ ବାରଣ କରିଥାଏ। " "ସର୍ବୋତ୍ତମ ସୁରକ୍ଷା ପାଇଁ, ଆପଣ ଗୋଟିଏ ପ୍ରବେଶ ସଙ୍କେତ ବିନ୍ଯାସ କରିବା ଉଚିତ, କିନ୍ତୁ ସାଧାରଣ ଚାଳକ ପାଇଁ " "ଗୋଟିଏ ପ୍ରବେଶ ସଙ୍କେତ ଆବଶ୍ୟକ ନୁହେଁ।" #: ../textw/bootloader_text.py:400 msgid "Use a GRUB Password" msgstr "ଗୋଟିଏ GRUB ପ୍ରବେଶ ସଙ୍କେତ କୁ ବ୍ଯବହାର କରନ୍ତୁ" #: ../textw/bootloader_text.py:412 msgid "Boot Loader Password:" msgstr "ବୁଟ-ଲୋଡର ର ପ୍ରବେଶ ସଙ୍କେତ:" #: ../textw/bootloader_text.py:413 tmp/account.glade.h:1 msgid "Confirm:" msgstr "ନିଶ୍ଚିତ କରନ୍ତୁ:" #: ../textw/bootloader_text.py:442 msgid "Passwords Do Not Match" msgstr "ପ୍ରବେଶ ସଙ୍କେତ ଟି ମିଶୁନାହିଁ" #: ../textw/bootloader_text.py:447 msgid "Password Too Short" msgstr "ପ୍ରବେଶ ସଙ୍କେତ ଟି ବହୁତ ଛୋଟ ଅଟେ" #: ../textw/bootloader_text.py:448 msgid "Boot loader password is too short" msgstr "ବୁଟ-ଲୋଡର ପ୍ରବେଶ ସଙ୍କେତଟି ବହୁତ ଛୋଟ ଅଟେ" #: ../textw/complete_text.py:32 msgid "" "Press to end the installation process.\n" "\n" msgstr "" "ସ୍ଥାପନ ପ୍ରକ୍ରିୟାକୁ ସମାପ୍ତ କରିବା ପାଇଁ ଦବାନ୍ତୁ।\n" "\n" #: ../textw/complete_text.py:33 msgid " to exit" msgstr "ପ୍ରସ୍ଥାନ କରିବା ପାଇଁ " #: ../textw/complete_text.py:37 #, python-format msgid "" "Congratulations, your %s installation is complete.\n" "\n" "%s%s" msgstr "" "ଅଭିନନ୍ଦନ, ଆପଣଙ୍କ %s ସ୍ଥାପନ ପ୍ରକ୍ରିୟା ଟି ସମ୍ପୂର୍ଣ୍ଣ ହେଲା।\n" "\n" "%s%s" #: ../textw/complete_text.py:40 #, python-format msgid "" "For information on errata (updates and bug fixes), visit http://www.redhat." "com/errata/.\n" "\n" "Information on using your system is available in the %s manuals at http://" "www.redhat.com/docs/." msgstr "" "ଇରାଟା (ଅଦ୍ଯତନ ଏବଂ ଦୋଷ ସମାଧାନ) ସମ୍ବନ୍ଧୀତ ସୂଚନା ପାଇଁ, ଏହି ୟୁ.ଆର.ଏଲ. କୁ ଯାଆନ୍ତୁ http://" "www.redhat.com/errata/.\n" "\n" "ଆପଣଙ୍କ ତନ୍ତ୍ରର ବ୍ଯବହାର ସମ୍ବନ୍ଧୀତ ସୂଚନାକ ଏହି ୟୁ.ଆର.ଏଲ. ର %s ମେନ୍ଯୁଆଲରେ ଉପଲବ୍ଧ http://www." "redhat.com/docs/।" #: ../textw/complete_text.py:46 msgid "Complete" msgstr "ସମ୍ପୂର୍ଣ୍ଣ" #: ../textw/complete_text.py:47 msgid "Reboot" msgstr "ପୁନର୍ଚାଳନ କରନ୍ତୁ" #: ../textw/grpselect_text.py:71 msgid "Please select the package groups you would like to install." msgstr "ଦୟାକରି ଆପଣ ସ୍ଥାପନ କରିବା ପାଇଁ ଚାହୁଁଥିବା ପ୍ଯାକେଜ ସମୂହ ମାନଙ୍କୁ ଚୟନ କରନ୍ତୁ।" #: ../textw/grpselect_text.py:89 msgid ",<+>,<-> selection | Group Details | next screen" msgstr ",<+>,<-> ଚୟନ | ସମୂହ ବିବରଣୀ | ପରବର୍ତ୍ତୀ ପରଦା" #: ../textw/grpselect_text.py:101 msgid "No optional packages to select" msgstr "ଚୟନ କରିବା ପାଇଁ କୌଣସି ଇଚ୍ଛାଧୀନ ପ୍ଯାକେଜ ନାହିଁ" #: ../textw/grpselect_text.py:123 msgid "Package Group Details" msgstr "ପ୍ଯାକେଜ ସମୂହ ର ବିବରଣୀ" #: ../textw/keyboard_text.py:48 msgid "Keyboard Selection" msgstr "କି-ବୋର୍ଡ ଚୟନ" #: ../textw/keyboard_text.py:49 msgid "Which model keyboard is attached to this computer?" msgstr "ଏହି କମ୍ପୁଟର ସହିତ କେଉଁ ମୋଡେଲ ର କି-ବୋର୍ଡ ସଂଲଗ୍ନିତ ହୋଇଛି?" #: ../textw/netconfig_text.py:41 #, python-format msgid "A value is required for the field %s" msgstr "%s କ୍ଷେତ୍ର ପାଇଁ ଗୋଟିଏ ମୂଲ୍ଯ ଆବଶ୍ୟକ।" #: ../textw/netconfig_text.py:86 tmp/netconfig.glade.h:9 msgid "Enable network interface" msgstr "ନେଟୱାର୍କ ଅନ୍ତରାପୃଷ୍ଠକୁ ସକ୍ରିୟ କରନ୍ତୁ" #: ../textw/netconfig_text.py:89 tmp/netconfig.glade.h:10 msgid "" "This requires that you have an active network connection during the " "installation process. Please configure a network interface." msgstr "" "ଏଥିପାଇଁ ସ୍ଥାପନ ସମୟରେ ଗୋଟିଏ ସକ୍ରିୟ ନେଟୱାର୍କ ସଂଯୋଗ ଥିବା ଉଚିତ। ଦୟାକରି ଗୋଟିଏ ନେଟୱାର୍କ " "ଅନ୍ତରାପୃଷ୍ଠକୁ ବିନ୍ଯାସ କରନ୍ତୁ।" #: ../textw/netconfig_text.py:127 msgid "Use dynamic IP configuration (DHCP)" msgstr "ଗତିଶୀଳ IP ବିନ୍ଯାସ (DHCP) କୁ ବ୍ଯବହାର କରନ୍ତୁ" #: ../textw/netconfig_text.py:130 ../loader/net.c:493 msgid "Enable IPv4 support" msgstr "IPv4 ସହାୟତାକୁ ସକ୍ରିୟ କରନ୍ତୁ" #: ../textw/netconfig_text.py:137 msgid "IPv4 Address:" msgstr "IPv4 ଠିକଣା:" #: ../textw/netconfig_text.py:157 ../loader/net.c:850 msgid "Gateway:" msgstr "ଗେଟ-ୱେ:" #: ../textw/netconfig_text.py:160 msgid "Nameserver:" msgstr "ନାମ ସର୍ଭର:" #: ../textw/netconfig_text.py:189 msgid "Missing Device" msgstr "ଅନୁପସ୍ଥିତ ଉପକରଣ" #: ../textw/netconfig_text.py:190 msgid "You must select a network device" msgstr "ଆପଣ ଗୋଟିଏ ନେଟୱର୍କ ଉପକରଣକୁ ଚୟନ କରିବା ଉଚିତ" #: ../textw/netconfig_text.py:241 msgid "IPv4 Network Mask " msgstr "IPv4 ନେଟୱାର୍କ ମାସ୍କ" #: ../textw/netconfig_text.py:264 msgid "Configuring Network Interfaces" msgstr "ନେଟୱାର୍କ ଅନ୍ତରାପୃଷ୍ଠକୁ ବିନ୍ଯାସ କରନ୍ତୁ" #: ../textw/netconfig_text.py:264 msgid "Waiting for NetworkManager..." msgstr "ନେଟୱର୍କ ପରିଚାଳକଙ୍କୁ ଅପେକ୍ଷା କରିଅଛି..." #: ../textw/network_text.py:42 msgid "Hostname Configuration" msgstr "ଆଧାରନାମ ବିନ୍ଯାସ" #: ../textw/network_text.py:50 msgid "" "If your system is part of a larger network where hostnames are assigned by " "DHCP, select automatically via DHCP. Otherwise, select manually and enter a " "hostname for your system. If you do not, your system will be known as " "'localhost.'" msgstr "" "ଯଦି ଆପଣଙ୍କ ତନ୍ତ୍ରଟି ଗୋଟିଏ ବଡ ନେଟୱାର୍କର ଅଂଶ ଅଟେ ଯେଉଁଠାରେ DHCP ଦ୍ବାରା ଆଧାର ନାମ ନିରୂପଣ " "କରାଯାଇଛି, ତାହାହେଲେ DHCP ଦ୍ବାରା ସ୍ବତଃଚୟନ କରନ୍ତୁ। ଅନ୍ଯଥା, ହସ୍ତକୃତ ଭାବରେ ଚୟନ କରନ୍ତୁ ଏବଂ " "ଆପଣଙ୍କ ତନ୍ତ୍ର ପାଇଁ ଗୋଟିଏ ଆଧାର ନାମ ଭରଣ କରନ୍ତୁ। ଯଦି ଆପଣ ଏପରି ନ କରନ୍ତି, ତାହାହେଲେ ଆପଣଙ୍କ " "ତନ୍ତ୍ରଟି ଗୋଟିଏ 'localhost' ଭାବେ ପରିଚିତ ହେବ।" #: ../textw/network_text.py:75 ../textw/network_text.py:82 msgid "Invalid Hostname" msgstr "ଅବୈଧ ଆଧାରନାମ" #: ../textw/network_text.py:76 msgid "You have not specified a hostname." msgstr "ଆପଣ ଗୋଟିଏ ଆଧାରନାମ ଉଲ୍ଲେଖିତ କରି ନାହାଁନ୍ତି।" #: ../textw/partition_text.py:51 msgid "Must specify a value" msgstr "ଗୋଟିଏ ମୂଲ୍ୟ ଉଲ୍ଲେଖ କରିବା ଉଚିତ" #: ../textw/partition_text.py:54 msgid "Requested value is not an integer" msgstr "ନିବେଦିତ ମୂଲ୍ୟଟି ଗୋଟିଏ ପୂର୍ଣ୍ଣାଙ୍କ ନୁହେଁ" #: ../textw/partition_text.py:56 msgid "Requested value is too large" msgstr "ନିବେଦିତ ମୂଲ୍ୟଟି ବହୁତ ବଡ ଅଟେ" #: ../textw/partition_text.py:123 #, python-format msgid "RAID Device %s" msgstr "RAID ଉପକରଣ %s" #: ../textw/partition_text.py:251 #, python-format msgid "Warning: %s" msgstr "ଚେତାବନୀ: %s" #: ../textw/partition_text.py:252 msgid "Modify Partition" msgstr "ପ୍ରତିଛବିକୁ ରୂପାନ୍ତରିତ କରନ୍ତୁ" #: ../textw/partition_text.py:252 msgid "Add anyway" msgstr "ତଥାପି ଯୋଗ କରନ୍ତୁ" #: ../textw/partition_text.py:290 msgid "Mount Point:" msgstr "ମାଉଣ୍ଟ ବିନ୍ଦୁ:" #: ../textw/partition_text.py:342 msgid "File System type:" msgstr "ଫାଇଲ ତନ୍ତ୍ରର ପ୍ରକାର:" #: ../textw/partition_text.py:376 msgid "Allowable Drives:" msgstr "ସ୍ବୀକାର୍ଯ୍ଯ ଡ୍ରାଇଭ:" #: ../textw/partition_text.py:432 msgid "Fixed Size:" msgstr "ନିର୍ଦ୍ଦିଷ୍ଟ ଆକାର:" #: ../textw/partition_text.py:434 msgid "Fill maximum size of (MB):" msgstr "(ମେଗା ବାଇଟ) ର ସର୍ବାଧିକ ଆକାର କୁ ଭରଣ କରନ୍ତୁ:" #: ../textw/partition_text.py:438 msgid "Fill all available space:" msgstr "ସମସ୍ତ ଉପଲବ୍ଧ ସ୍ଥାନକୁ ପୂର୍ଣ୍ଣ କରନ୍ତୁ:" #: ../textw/partition_text.py:461 msgid "Start Cylinder:" msgstr "ପ୍ରାରମ୍ଭିକ ସିଲିଣ୍ଡର:" #: ../textw/partition_text.py:474 msgid "End Cylinder:" msgstr "ଅନ୍ତ ସିଲିଣ୍ଡର:" #: ../textw/partition_text.py:497 msgid "Volume Group:" msgstr "ଘନଫଳ ସମୂହ:" #: ../textw/partition_text.py:519 msgid "RAID Level:" msgstr "RAID ସ୍ତର:" #: ../textw/partition_text.py:537 msgid "RAID Members:" msgstr "RAID ସଦସ୍ଯ:" #: ../textw/partition_text.py:556 msgid "Number of spares?" msgstr "ଅତିରିକ୍ତ ମାନଙ୍କ ସଂଖ୍ଯା?" #: ../textw/partition_text.py:570 msgid "File System Type:" msgstr "ଫାଇଲ ତନ୍ତ୍ର ର ପ୍ରକାର:" #: ../textw/partition_text.py:583 msgid "File System Label:" msgstr "ଫାଇଲ ତନ୍ତ୍ର ର ସୂଚକ:" #: ../textw/partition_text.py:594 msgid "File System Option:" msgstr "ଫାଇଲ ତନ୍ତ୍ର ବିକଳ୍ପ:" #: ../textw/partition_text.py:597 ../textw/partition_text.py:804 #: ../textw/partition_text.py:1029 ../textw/partition_text.py:1199 #, python-format msgid "Format as %s" msgstr "%s ଭଳି ଭାବରେ ଫର୍ମାଟ କରନ୍ତୁ" #: ../textw/partition_text.py:599 ../textw/partition_text.py:806 #: ../textw/partition_text.py:1031 ../textw/partition_text.py:1201 #, python-format msgid "Migrate to %s" msgstr "%s କୁ ଉତ୍ପ୍ରବାସିତ କରନ୍ତୁ" #: ../textw/partition_text.py:601 ../textw/partition_text.py:808 #: ../textw/partition_text.py:1033 ../textw/partition_text.py:1203 msgid "Leave unchanged" msgstr "ଅପରିବର୍ତ୍ତିତ ଭାବରେ ଛାଡି ଦିଅନ୍ତୁ" #: ../textw/partition_text.py:614 ../textw/partition_text.py:784 #: ../textw/partition_text.py:1009 ../textw/partition_text.py:1179 msgid "File System Options" msgstr "ଫାଇଲ ତନ୍ତ୍ର ବିକଳ୍ପ" #: ../textw/partition_text.py:617 msgid "" "Please choose how you would like to prepare the file system on this " "partition." msgstr "ଏହି ବିଭାଜନରେ ଫାଇଲ ତନ୍ତ୍ରକୁ ପ୍ରସ୍ତୁତ କରିବାର ପ୍ରକ୍ରିୟାକୁ ଚୟନ କରନ୍ତୁ।" #: ../textw/partition_text.py:624 msgid "Leave unchanged (preserve data)" msgstr "ଅପରିବର୍ତିତ ଭାବରେ ଛାଡି ଦିଅନ୍ତୁ (ତଥ୍ଯ କୁ ସଂରକ୍ଷିତ କରନ୍ତୁ)" #: ../textw/partition_text.py:633 msgid "Format as:" msgstr "ଏଭଳି ଭାବରେ ଫର୍ମାଟ କରନ୍ତୁ:" #: ../textw/partition_text.py:653 msgid "Migrate to:" msgstr "ଏଠାକୁ ଉତ୍ପ୍ରବାସିତ କରନ୍ତୁ:" #: ../textw/partition_text.py:754 msgid "Force to be a primary partition" msgstr "ଗୋଟିଏ ପ୍ରାଥମିକ ବିଭାଜନ ହେବା ପାଇଁ ବଳ ପ୍ରୟୋଗ କରନ୍ତୁ" #: ../textw/partition_text.py:763 msgid "Not Supported" msgstr "ସହାୟକ ନୁହେଁ" #: ../textw/partition_text.py:764 msgid "You can only edit LVM Volume Groups in the graphical installer." msgstr "ଆଲେଖୀକ ସ୍ଥାପକରେ ଆପଣ କେବଳ LVM ଘନଫଳ ସମୂହ ମାନଙ୍କୁ ସମ୍ପାଦନ କରିପାରିବେ।" #: ../textw/partition_text.py:831 ../textw/partition_text.py:879 msgid "Invalid Entry for Partition Size" msgstr "ବିଭାଜନ ଆକାର ପାଇଁ ଅବୈଧ ଭରଣ" #: ../textw/partition_text.py:843 msgid "Invalid Entry for Maximum Size" msgstr "ସର୍ବାଧିକ ଆକାର ପାଇଁ ଅବୈଧ ଭରଣ" #: ../textw/partition_text.py:862 msgid "Invalid Entry for Starting Cylinder" msgstr "ପ୍ରାରମ୍ଭିକ ସିଲିଣ୍ଡର ପାଇଁ ଅବୈଧ ଭରଣ" #: ../textw/partition_text.py:871 msgid "Invalid Entry for End Cylinder" msgstr "ଅନ୍ତ ସିଲିଣ୍ଡର ପାଇଁ ଅବୈଧ ଭରଣ" #: ../textw/partition_text.py:982 msgid "No RAID partitions" msgstr "କୌଣସି RAID ବିଭାଜନ ନାହିଁ" #: ../textw/partition_text.py:983 msgid "At least two software RAID partitions are needed." msgstr "ଅତିକମ ରେ ଦୁଇଟି ସଫଟୱେର RAID ବିଭାଜନ ଆବଶ୍ୟକ।" #: ../textw/partition_text.py:995 ../textw/partition_text.py:1166 msgid "Format partition?" msgstr "ପ୍ରତିଛବିକୁ ଫର୍ମାଟ କରନ୍ତୁ?" #: ../textw/partition_text.py:1057 msgid "Invalid Entry for RAID Spares" msgstr "RAID ଅତିରିକ୍ତ ପାଇଁ ଅବୈଧ ଭରଣ" #: ../textw/partition_text.py:1072 msgid "Too many spares" msgstr "ଅତ୍ୟଧିକ ଅତିରିକ୍ତ" #: ../textw/partition_text.py:1073 msgid "You may not use any spares with a RAID0 array." msgstr "ଗୋଟିଏ RAID0 ଧାଡି ଆପଣ କୌଣସି ଅତିରିକ୍ତ ମାନଙ୍କୁ ବ୍ଯବହାର କରି ନ ପାରନ୍ତି।" #: ../textw/partition_text.py:1152 msgid "No Volume Groups" msgstr "ଘନଫଳ ସମୂହ ନାହିଁ" #: ../textw/partition_text.py:1153 msgid "No volume groups exist in which to create a logical volume" msgstr "ଗୋଟିଏ ତାର୍କିକ ଘନଫଳ ସୃଷ୍ଟି କରିବା ପାଇଁ କୌଣସି ଘନଫଳ ସମୂହ ଅବସ୍ଥିତ ନାହିଁ" #: ../textw/partition_text.py:1277 #, python-format msgid "" "The current requested size (%10.2f MB) is larger than the maximum logical " "volume size (%10.2f MB). " msgstr "" "ବର୍ତ୍ତମାନ ନିବେଦିତ ଆକାର (%10.2f ମେଗା-ବାଇଟ) ସର୍ବାଧିକ ତାର୍କିକ ଘନଫଳ ଆକାର (%10.2f ମେଗା-" "ବାଇଟ) ଠାରୁ ଅଧିକ ଅଟେ।" #: ../textw/partition_text.py:1296 #, python-format msgid "" "The current requested size (%10.2f MB) is larger than the available size in " "the volume group (%10.2f MB)." msgstr "" "ବର୍ତ୍ତମାନ ନିବେଦିତ ଆକାର (%10.2f ମେଗା-ବାଇଟ) ସର୍ବାଧିକ ଉପଲବ୍ଧ କ ଘନଫସମୂହର ଳ ଆକାର (%10.2f " "ମେଗା-ବାଇଟ) ଠାରୁ ଅଧିକ ଅଟେ। " #: ../textw/partition_text.py:1349 msgid "New Partition or Logical Volume?" msgstr "ନୂତନ ବିଭାଜନ କିମ୍ବା ତାର୍କିକ ଘନଫଳ" #: ../textw/partition_text.py:1350 msgid "Would you like to create a new partition or a new logical volume?" msgstr "ଆପଣ ଗୋଟିଏ ନୂତନ ବିଭାଜନ କିମ୍ବା ତାର୍କିକ ଘନଫଳ ସୃଷ୍ଟି କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି?" #: ../textw/partition_text.py:1352 msgid "partition" msgstr "ବିଭାଜନ" #: ../textw/partition_text.py:1352 msgid "logical volume" msgstr "ତାର୍କିକ ଘନଫଳ" #: ../textw/partition_text.py:1424 msgid "Size" msgstr "ଆକାର" #: ../textw/partition_text.py:1428 msgid "New" msgstr "ନୂତନ" #: ../textw/partition_text.py:1430 msgid "Delete" msgstr "କାଢନ୍ତୁ" #: ../textw/partition_text.py:1431 msgid "RAID" msgstr "ରେଡ୍" #: ../textw/partition_text.py:1434 msgid " F1-Help F2-New F3-Edit F4-Delete F5-Reset F12-OK " msgstr "" " F1-ସହାୟତା F2-ନୂତନ F3-ଅଦ୍ଯତନ କରନ୍ତୁ F4-ଅପସାରଣ କରନ୍ତୁ F5-ପୁନଃ ସ୍ଥାପନ " "କରନ୍ତୁ F12-ଠିକ ଅଛି " #: ../textw/partition_text.py:1466 msgid "No Root Partition" msgstr "ରୁଟ ବିଭାଜନ ନାହିଁ" #: ../textw/partition_text.py:1467 msgid "Installation requires a / partition." msgstr "ସ୍ଥାପନ ପଦ୍ଧତି ଗୋଟିଏ / ସମର୍ଥନ ଆବଶ୍ୟକ କରିଥାଏ।" #: ../textw/partition_text.py:1509 msgid "Partitioning Type" msgstr "ବିଭାଜନ ପ୍ରକାର" #: ../textw/partition_text.py:1511 msgid "" "Installation requires partitioning of your hard drive. The default layout " "is reasonable for most users. You can either choose to use this or create " "your own." msgstr "" "ସ୍ଥାପନ ପ୍ରକ୍ରିୟା ପାଇଁ ଆପଣଙ୍କ ତନ୍ତ୍ରର ବିଭାଜନ ଆବଶ୍ୟକ। ଅଧିକାଂଶ ଚାଳକ ମାନଙ୍କ ପାଇଁ ପୂର୍ବନିର୍ଦ୍ଧାରିତ " "ବିନ୍ୟାସ ଟି ଉପଯୁକ୍ତ ଅଟେ। ଆପଣ ଏହାକୁ ଚୟନ କରିବା ପାଇଁ ବାଛି ପାରନ୍ତି କିମ୍ବା ଆପଣଙ୍କ ନିଜସ୍ବ ବିଭାଜନ " "ସୃଷ୍ଟି କରିପାରନ୍ତି।" #: ../textw/partition_text.py:1535 msgid "Which drive(s) do you want to use for this installation?" msgstr "ଏହି ସ୍ଥାପନ ପାଇଁ ଆପଣ କେଉଁ ଡ୍ରାଇଭ (କୁ/ମାନଙ୍କୁ) ବ୍ଯବହାର କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../textw/partition_text.py:1550 msgid ",<+>,<-> selection | Add drive | next screen" msgstr ",<+>,<-> ଚୟନ | ଡ୍ରାଇଭ ଯୋଗକରନ୍ତୁ | ପରବର୍ତ୍ତୀ ପରଦା" #: ../textw/partition_text.py:1617 msgid "Review Partition Layout" msgstr "ବିଭାଜିତ ବିନ୍ଯାସ ର ସମୀକ୍ଷା କରନ୍ତୁ" #: ../textw/partition_text.py:1618 msgid "Review and modify partitioning layout?" msgstr "ବିଭାଜିତ ବିନ୍ଯାସ ର ସମୀକ୍ଷା ଏବଂ ରୂପାନ୍ତରଣ କରିବ କି?" #: ../textw/partition_text.py:1639 tmp/adddrive.glade.h:3 msgid "Advanced Storage Options" msgstr "ଉନ୍ନତ ଭଣ୍ଡାର ବିକଳ୍ପ" #: ../textw/partition_text.py:1640 tmp/adddrive.glade.h:5 msgid "How would you like to modify your drive configuration?" msgstr "ଆପଣ ଆପଣଙ୍କ ଡ୍ରାଇଭ ବିନ୍ଯାସକୁ ବଦଳାଇବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି?" #: ../textw/partition_text.py:1663 msgid "Add FCP Device" msgstr "FCP ଉପକରଣକୁ ଯୋଗ କରନ୍ତୁ" #: ../textw/partition_text.py:1664 tmp/zfcp-config.glade.h:5 msgid "" "zSeries machines can access industry-standard SCSI devices via Fibre Channel " "(FCP). You need to provide a 16 bit device number, a 64 bit World Wide Port " "Name (WWPN), and a 64 bit FCP LUN for each device." msgstr "" "zSeries ଉପକରଣ ଫାଇବର ଉପପଥ (FCP) ଦ୍ବାରା ଉଦ୍ଯୋଗୀକ ମାନର SCSCI ଉପକରଣକୁ ଅଭିଗମ କରିପାରିବ। " "ପ୍ରତ୍ଯେକ ଉପକରଣ ପାଇଁ ଆପଣ ଗୋଟିଏ ୧୬-ବିଟ ଉପକରଣ ସଂଖ୍ଯା, ଗୋଟିଏ ୬୪-ବିଟ ବିଶ୍ବବ୍ଯାପୀ ସଂଯୋଗିକୀ " "ସଂଖ୍ଯା (WWPN), ଗୋଟିଏ ୬୪-ବିଟ FCP LUN ପ୍ରଦାନ କରିବା ଉଚିତ।" #: ../textw/partition_text.py:1687 tmp/iscsi-config.glade.h:7 msgid "Configure iSCSI Parameters" msgstr "iSCSI ପାରାମିଟରକୁ ବିନ୍ଯାସ କରନ୍ତୁ" #: ../textw/partition_text.py:1688 tmp/iscsi-config.glade.h:8 msgid "" "To use iSCSI disks, you must provide the address of your iSCSI target and " "the iSCSI initiator name you've configured for your host." msgstr "" "iSCSI ଡିସ୍କକୁ ବ୍ଯବହାର କରିବା ପାଇଁ, ଆପଣ ଆପଣଙ୍କର ଆଧାରରେ ବିନ୍ଯାସ କରିଥିବା iSCSI ଲକ୍ଷ୍ଯର ଠିକଣା " "ଏବଂ iSCSI ପ୍ରାରମ୍ଭକଙ୍କ ନାମ ପ୍ରଦାନ କରିବା ଉଟିତ।" #: ../textw/partition_text.py:1689 msgid "Target IP Address" msgstr "ଲକ୍ଷ୍ଯସ୍ଥ ଆଇ.ପି. ଠିକଣା" #: ../textw/partition_text.py:1690 msgid "iSCSI Initiator Name" msgstr "iSCSI ପ୍ରାରମ୍ଭକଙ୍କ ନାମ" #: ../textw/partition_text.py:1691 msgid "CHAP username" msgstr "CHAP ଚାଳକ ନାମ" #: ../textw/partition_text.py:1692 msgid "CHAP password" msgstr "CHAP ପ୍ରବେଶ ସଙ୍କେତ" #: ../textw/partition_text.py:1693 msgid "Reverse CHAP username" msgstr "ଓଲଟା CHAP ଚାଳକ ନାମ" #: ../textw/partition_text.py:1694 msgid "Reverse CHAP password" msgstr "ଓଲଟା CHAP ପ୍ରବେଶ ସଙ୍କେତ" #: ../textw/partition_text.py:1712 msgid "Username is required when password is present." msgstr "ପ୍ରବେଶ ସଂକେତ ଉପସ୍ଥିତ ଥିବା ସମୟରେ ଚାଳକ ନାମ ଆବଶ୍ୟକ." #: ../textw/partition_text.py:1715 msgid "Password is required when username is present." msgstr "ଚାଳକ ନାମ ଉପସ୍ଥିତ ଥିବା ସମୟରେ ପ୍ରବେଶ ସଂକେତ ଆବଶ୍ୟକ." #: ../textw/partition_text.py:1720 msgid "Reverse username is required whenreverse password is present." msgstr "ଓଲଟା ପ୍ରବେଶ ସଂକେତ ଉପସ୍ଥିତ ଥିବା ସମୟରେ ଓଲଟା ଚାଳକ ନାମ ଆବଶ୍ୟକ." #: ../textw/partition_text.py:1724 msgid "Reverse password is required whenreverse username is present." msgstr "ଓଲଟା ଚାଳକ ନାମ ଉପସ୍ଥିତ ଥିବା ସମୟରେ ଓଲଟା ପ୍ରବେଶ ସଂକେତ ଆବଶ୍ୟକ." #: ../textw/partmethod_text.py:34 msgid "Autopartition" msgstr "ସ୍ବତଃବିଭାଜନ" #: ../textw/partmethod_text.py:35 msgid "Disk Druid" msgstr "ଡିସ୍କ ଡୃଇଡ" #: ../textw/progress_text.py:61 msgid "Package Installation" msgstr "ପ୍ଯାକେଜ ସ୍ଥାପନ" #: ../textw/task_text.py:42 msgid "Package selection" msgstr "ପ୍ଯାକେଜ ଚୟନ" #: ../textw/task_text.py:48 tmp/tasksel.glade.h:4 #, no-c-format, python-format msgid "" "The default installation of %s includes a set of software applicable for " "general internet usage. What additional tasks would you like your system to " "support?" msgstr "" "%s ର ପୂର୍ବନିର୍ଦ୍ଧାରିତ ସ୍ଥାପନ ସାଧାରଣ ଇଣ୍ଟରନେଟ ବ୍ଯବହାର ପାଇଁ ଉପଯୋଗୀ ସଫଟୱେର ମାନଙ୍କର ଗୋଟିଏ " "ସେଟକୁ ଅନ୍ତର୍ଭୂକ୍ତ କରିଥାଏ। ଆପଣଙ୍କ ତନ୍ତ୍ରର ସହାୟତା ପାଇଁ ଆପଣ କେଉଁ ଅତିରିକ୍ତ ସାଧନକୁ ସଂଲଗ୍ନିତ କରିବା " "ପାଇଁ ଚାହାଁନ୍ତି?" #: ../textw/task_text.py:63 msgid "Customize software selection" msgstr "ସଫଟ୍ଟୱେର ଚୟନ କୁ ଇଚ୍ଛାରୂପଣ କରନ୍ତୁ" #: ../textw/timezone_text.py:75 msgid "In which time zone are you located?" msgstr "ଆପଣ କେଉଁ ସମୟ ମଣ୍ଡଳରେ ଅବସ୍ଥିତ ଅଛନ୍ତି?" #: ../textw/timezone_text.py:93 msgid "System clock uses UTC" msgstr "ତନ୍ତ୍ରର ଘଡି UTC କୁ ବ୍ଯବହାର କରୁଅଛି" #: ../textw/upgrade_bootloader_text.py:115 #: ../textw/upgrade_bootloader_text.py:124 msgid "Update boot loader configuration" msgstr "ବୁଟ-ଲୋଡର ବିନ୍ଯାସ ର ଅଦ୍ଯତନ କରନ୍ତୁ" #: ../textw/upgrade_bootloader_text.py:127 msgid "Skip boot loader updating" msgstr "ବୁଟ-ଲୋଡର ଅଦ୍ଯତନ କୁ ଛାଡି ଦିଅନ୍ତୁ" #: ../textw/upgrade_bootloader_text.py:129 msgid "Create new boot loader configuration" msgstr "ନୂତନ ବୁଟ-ଲୋଡର ବିନ୍ଯାସ କୁ ସୃଷ୍ଟି କରନ୍ତୁ" #: ../textw/upgrade_text.py:39 #, python-format msgid "" "This release of %s supports the an updated file system, which has several " "benefits over the file system traditionally shipped in %s. This " "installation program can migrate formatted partitions without data loss.\n" "\n" "Which of these partitions would you like to migrate?" msgstr "" "%s ର ଏହି ସଂସ୍କରଣ ଅଦ୍ୟତିତ ଫାଇଲ ତନ୍ତ୍ରକୁ ସମର୍ଥ କରିଥାଏ, ଯାହାର %s ରେ ପାରମ୍ପରିକ ଭାବରେ " "ପଠାଯାଇଥିବା ଫାଇଲ ତନ୍ତ୍ର ଅପେକ୍ଷା ଅଧିକ ଉପଯୋଗୀତା ଅଛି। ଏହି ସ୍ଥାପନ ପ୍ରକ୍ରିୟା ସଂରୂପୀତ ବିଭାଜନ " "ମାନଙ୍କୁ ବିନା ତଥ୍ଯ ହାନିରେ ଉତ୍ପ୍ରବାସିତ କରିପାରିବ।\n" "\n" "ଏହି ବିଭାଜନ ମାନଙ୍କ ମଧ୍ଯରୁ ଆପଣ କାହାକୁ ଉତ୍ପ୍ରବାସନ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../textw/upgrade_text.py:121 msgid "Free Space" msgstr "ଖାଲି ସ୍ଥାନ" #: ../textw/upgrade_text.py:136 msgid "RAM detected (MB):" msgstr "RAM କୁ ଅନୁସନ୍ଧାନ କଲା (ମେଗା ବାଇଟ୍):" #: ../textw/upgrade_text.py:139 msgid "Suggested size (MB):" msgstr "ପ୍ରସ୍ତାବିତ ଆକାର (ମେଗା ବାଇଟ୍):" #: ../textw/upgrade_text.py:142 msgid "Swap file size (MB):" msgstr "swap ପ୍ରକ୍ରିୟା ର ଫାଇଲ ଆକାର (ମେଗା ବାଇଟ୍):" #: ../textw/upgrade_text.py:150 msgid "Add Swap" msgstr "swap ପ୍ରକ୍ରିୟାକୁ ଯୋଗ କରନ୍ତୁ" #: ../textw/upgrade_text.py:175 msgid "The value you entered is not a valid number." msgstr "ଆପଣ ଭରଣ କରିଥିବା ମୂଲ୍ଯ ଗୋଟିଏ ବୈଧ ନମ୍ବର ନୁହେଁ।" #: ../textw/upgrade_text.py:208 msgid "Reinstall System" msgstr "ତନ୍ତ୍ରକୁ ପୁନଃସ୍ଥାପନ କରନ୍ତୁ" #: ../textw/upgrade_text.py:222 msgid "System to Upgrade" msgstr "ତନ୍ତ୍ରକୁ ଉନ୍ନୟନ କରାଯିବ" #: ../textw/upgrade_text.py:223 msgid "" "There seem to be one or more existing Linux installations on your system.\n" "\n" "Please choose one to upgrade, or select 'Reinstall System' to freshly " "install your system." msgstr "" "ଆପଣଙ୍କ ତନ୍ତ୍ରରେ ଏକ କିମ୍ବା ଏକାଧିକ ପୂର୍ବରୁ ଅବସ୍ଥିତ LInux ସ୍ଥାପନ ଥିବା ପରି ଜଣାପଡୁଛି।\n" "\n" "ଦୟାକରି ଉନ୍ନୟନ କରିବା ପାଇଁ ଗୋଟିଏ ସ୍ଥାପନକୁ ଚୟନ କରନ୍ତୁ, କିମ୍ବା ପୁଣିଥରେ ଆପଣଙ୍କ ତନ୍ତ୍ରକୁ ସ୍ଥାପନ କରିବା " "ପାଇଁ 'ତନ୍ତ୍ରକୁ ପୁନଃସ୍ଥାପନ କରନ୍ତୁ' ବିକଳ୍ପକୁ ଚୟନ କରନ୍ତୁ।" #: ../textw/userauth_text.py:30 msgid "Root Password" msgstr "ପ୍ରମୂଖ ଚାଳକର ପ୍ରବେଶ ସଙ୍କେତ" #: ../textw/userauth_text.py:33 msgid "" "Pick a root password. You must type it twice to ensure you know it and do " "not make a typing mistake. " msgstr "" "ଗୋଟିଏ ରୁଟ (ପ୍ରମୂଖ ଚାଳକ) ପ୍ରବେଶ ସଙ୍କେତ ଚୟନ କରନ୍ତୁ। ତାହାକୁ ଦୁଇଥର ଟାଇପ କରି ଏହା ନିଶ୍ଚିତ କରନ୍ତୁ " "ଯେ ଆପଣ ତାହା ବିଷୟରେ ଜାଣିଛନ୍ତି ଏବଂ ଟାଇପ କରିବା ସମୟରେ କୌଣସି ଭୂଲ କରନ୍ତୁ ନାହିଁ।" #: ../textw/userauth_text.py:67 msgid "The root password must be at least 6 characters long." msgstr "ପ୍ରମୂଖ ଚାଳକ ର ପ୍ରବେଶ ସଙ୍କେତ ଟି ସର୍ବନିମ୍ନ ୬ ଅକ୍ଷର ବିଶିଷ୍ଟ ହୋଇଥିବା ଆବଶ୍ୟକ।" #: ../textw/welcome_text.py:28 #, python-format msgid "%s" msgstr "%s" #: ../textw/welcome_text.py:29 #, python-format msgid "" "Welcome to %s!\n" "\n" msgstr "" "%s କୁ ସ୍ବାଗତମ!\n" "\n" #: ../textw/zipl_text.py:35 msgid "" "The z/IPL Boot Loader will be installed on your system after installation is " "complete. You can now enter any additional kernel and chandev parameters " "which your machine or your setup require." msgstr "" "ସ୍ଥାପନ ପ୍ରକ୍ରିୟା ସମ୍ପନ୍ନ ହୋଇ ସାରିବା ପରେ z/IPL ବୁଟ-ଲୋଡର ଆପଣଙ୍କ ତନ୍ତ୍ରରେ ସ୍ଥାପନ କରାଯିବ। " "ଆପଣଙ୍କର ମେସିନ କିମ୍ବା ବ୍ଯବସ୍ଥାପନ ଆବଶ୍ୟକ କରୁଥିବା ଅତିରିକ୍ତ କର୍ଣ୍ଣଲ ଏବଂ chandev ପାରାମିଟର ମାନଙ୍କୁ " "ଆପଣ ବର୍ତ୍ତମାନ ଭରଣ କରିପାରିବେ।" #: ../textw/zipl_text.py:67 msgid "z/IPL Configuration" msgstr "z/IPL ବିନ୍ଯାସ" #: ../textw/zipl_text.py:75 ../textw/zipl_text.py:79 msgid "Chandev line " msgstr "Chandev ଲାଇନ" #: ../installclasses/fedora.py:38 msgid "_Fedora" msgstr "_Fedora" #: ../installclasses/fedora.py:39 ../installclasses/rhel.py:44 #, python-format msgid "" "The default installation of %s includes a set of software applicable for " "general internet usage. What additional tasks would you like your system to " "include support for?" msgstr "" "%s ର ପୂର୍ବନିର୍ଦ୍ଧାରିତ ସ୍ଥାପନ ସାଧାରଣ ଇଣ୍ଟରନେଟ ବ୍ଯବହାର ପାଇଁ ଉପଯୋଗୀ ସଫଟୱେର ମାନଙ୍କର ଗୋଟିଏ " "ସେଟକୁ ଅନ୍ତର୍ଭୂକ୍ତ କରିଥାଏ। ଆପଣଙ୍କ ତନ୍ତ୍ରର ସହାୟତା ପାଇଁ ଆପଣ କେଉଁ ଅତିରିକ୍ତ ସାଧନକୁ ସଂଲଗ୍ନିତ କରିବା " "ପାଇଁ ଚାହାଁନ୍ତି?" #: ../installclasses/fedora.py:48 msgid "Office and Productivity" msgstr "ଓଫିସ ଏବଂ ଉତ୍ପାଦିକା ଶକ୍ତି" #: ../installclasses/fedora.py:49 ../installclasses/rhel.py:56 #: ../installclasses/rhel.py:61 msgid "Software Development" msgstr "ସଫଟୱେର ବିକାଶ" #: ../installclasses/fedora.py:50 msgid "Web Server" msgstr "ୱେବ ସର୍ଭର" #: ../installclasses/rhel.py:43 msgid "Red Hat Enterprise Linux" msgstr "Red Hat Enterprise Linux" #: ../installclasses/rhel.py:53 msgid "Office" msgstr "କାର୍ଯ୍ଯାଳୟ" #: ../installclasses/rhel.py:54 msgid "Multimedia" msgstr "ବହୁମାଧ୍ଯମ" #: ../installclasses/rhel.py:60 msgid "Web server" msgstr "ୱେବ ସେବକ" #: ../installclasses/rhel.py:65 msgid "Virtualization" msgstr "ଆଭାସୀକରଣ" #: ../installclasses/rhel.py:66 msgid "Clustering" msgstr "ଏକତ୍ରିକରଣ" #: ../installclasses/rhel.py:67 msgid "Storage Clustering" msgstr "ଭଣ୍ଡାର ଏକତ୍ରିକରଣ" #: ../installclasses/rhel.py:71 msgid "Installation Number" msgstr "ସ୍ଥାପନ ସଂଖ୍ଯା" #: ../installclasses/rhel.py:72 msgid "" "To install the full set of supported packages included in your subscription, " "please enter your Installation Number" msgstr "" "ଆପଣଙ୍କ ସଦସ୍ଯତା ସହିତ ଅନ୍ତର୍ଭୂକ୍ତ ସମର୍ଥିତ ପ୍ଯାକେଜ ମାନଙ୍କର ସମ୍ପୂର୍ଣ୍ଣ ସେଟକୁ ସ୍ଥାପନ କରିବା ପାଇଁ, " "ଦୟାକରି ଆପଣଙ୍କ ସ୍ଥାପନ ସଂଖ୍ଯାକୁ ଭରଣ କରନ୍ତୁ" #: ../installclasses/rhel.py:75 msgid "" "If you're unable to locate the Installation Number, consult http://www." "redhat.com/apps/support/in.html.\n" "\n" "If you skip:\n" "* You may not get access to the full set of packages included in your " "subscription.\n" "* It may result in an unsupported/uncertified installation of Red Hat " "Enterprise Linux.\n" "* You will not get software and security updates for packages not included " "in your subscription." msgstr "" "ଯଦି ଆପଣ ସ୍ଥାପନ ସଂଖ୍ଯା ପାଉ ନାହାଁନ୍ତି, ତାହାହେଲେ http://www.redhat.com/apps/support/" "in.html ରେ ଯୋଗାଯୋଗ କରନ୍ତୁ।\n" "\n" "ଆପଣ ଏହାକୁ ଏଡାଇ ଦେଲେ:\n" "* ଆପଣ ସଦସ୍ଯତା ସହିତ ଅନ୍ତର୍ଭୂକ୍ତ ପ୍ଯାକେଜ ମାନଙ୍କର ସମ୍ପୂର୍ଣ୍ଣ ସେଟକୁ ଆପଣ ଅଭିଗମ କରି ନ ପାରନ୍ତି।\n" "* ଏହା Red Hat Enterprise Linux ର ଗୋଟିଏ ଅସମର୍ଥିତ/ଅପ୍ରମାଣିତ ସ୍ଥାପନ ସୃଷ୍ଟି କରିପାରେ।\n" "* ଆପଣ ଆପଣଙ୍କ ସଦସ୍ଯତା ସହିତ ଅନ୍ତର୍ଭୂକ୍ତ ହୋଇ ନ ଥିବା ସଫ୍ଟୱେର ଏବଂ ସୁରକ୍ଷା ଅଦ୍ଯତନ ମାନଙ୍କୁ ପାଇବେ " "ନାହିଁ।" #: ../loader/cdinstall.c:177 ../loader/cdinstall.c:198 #: ../loader/mediacheck.c:76 msgid "Media Check" msgstr "ସଞ୍ଚାରମାଧ୍ଯର ର ଯାଞ୍ଚ" #: ../loader/cdinstall.c:177 ../loader/cdinstall.c:180 #: ../loader/cdinstall.c:198 ../loader/cdinstall.c:206 ../loader/method.c:327 msgid "Test" msgstr "ପରୀକ୍ଷଣ" #: ../loader/cdinstall.c:177 ../loader/cdinstall.c:181 msgid "Eject Disc" msgstr "ଡିସ୍କ ବାହାର କରନ୍ତୁ" #: ../loader/cdinstall.c:178 #, c-format msgid "" "Choose \"%s\" to test the disc currently in the drive, or \"%s\" to eject " "the disc and insert another for testing." msgstr "" "ବର୍ତ୍ତମାନ ଡ୍ରାଇଭରେ ଥିବା ଡିସ୍କକୁ ପରୀକ୍ଷା କରିବା ପାଇଁ \"%s\" କୁ ଚୟନ କରନ୍ତୁ, କିମ୍ବା ଡିସ୍କ ବାହାର " "କରି ପରୀକ୍ଷଣ ପାଇଁ ଅନ୍ଯ ଗୋଟିଏ ଡିସ୍କକୁ ଭର୍ତ୍ତି କରିବା ପାଇଁ \"%s\" କୁ ଚୟନ କରନ୍ତୁ।" #: ../loader/cdinstall.c:199 #, c-format msgid "" "If you would like to test additional media, insert the next disc and press " "\"%s\". Testing each disc is not strictly required, however it is highly " "recommended. Minimally, the discs should be tested prior to using them for " "the first time. After they have been successfully tested, it is not required " "to retest each disc prior to using it again." msgstr "" "ଯଦି ଆପଣ ଗୋଟିଏ ଅତିରିକ୍ତ ମାଧ୍ଯମକୁ ଯାଞ୍ଚ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି, ତାହାହେଲେ ପରବର୍ତ୍ତୀ ଡିସ୍କକୁ ଭରଣ " "କରନ୍ତୁ ଏବଂ \"%s\" କୁ ଦବାନ୍ତୁ। ପ୍ରତ୍ଯେକ ଡିସ୍କର ପରୀକ୍ଷଣ ଅତ୍ଯନ୍ତ ଆବଶ୍ୟକ, ତାହାସତ୍ତ୍ବେ ଏହା ବିଶେଷ " "ଭାବରେ ପରାମର୍ଶିତ। ଅତିକମରେ, ଡିସ୍କ ଗୁଡିକୁ ପ୍ରଥମ ଥର ବ୍ଯବହାର କରିବା ପୂର୍ବରୁ ଯାଞ୍ଚ କରାଯିବା ଉଚିତ। " "ସେଗୁଡିକର ସଫଳ ପରୀକ୍ଷଣ ପରେ, ସେମାନଙ୍କୁ ପୁନର୍ବାର ବ୍ଯବହାର କରିବା ପୂର୍ବରୁ ସେଗୁଡିକର ପୁନଃପରୀକ୍ଷଣ " "ଆବଶ୍ୟକ ନୁହେଁ।" #: ../loader/cdinstall.c:220 #, c-format msgid "" "The %s disc was not found in any of your drives. Please insert the %s disc " "and press %s to retry." msgstr "" "ଆପଣଙ୍କ କୌଣସି CDROM ଡ୍ରାଇଭରେ %s ଡିସ୍କ ମିଳିଲା ନାହିଁ। ଦୟାକରି %s ଡିସ୍କକୁ ଭର୍ତ୍ତି କରନ୍ତୁ ଏବଂ " "ପୁନଃପ୍ରଚେଷ୍ଟା କରିବା ପାଇଁ %s କୁ ଦବାନ୍ତୁ।" #: ../loader/cdinstall.c:239 msgid "Disc Found" msgstr "ଡିସ୍କ ମିଳିଲା" #: ../loader/cdinstall.c:240 #, c-format msgid "" "To begin testing the media before installation press %s.\n" "\n" "Choose %s to skip the media test and start the installation." msgstr "" "ସ୍ଥାପନ ପୂର୍ବରୁ ମାଧ୍ଯମର ପରୀକ୍ଷଣ ପ୍ରକ୍ରିୟା ପ୍ରାରମ୍ଭ କରିବା ପାଇଁ %s କୁ ଦବାନ୍ତୁ।\n" "\n" "ମାଧ୍ଯମ ପରୀକ୍ଷଣକୁ ଏଡାଇ ସ୍ଥାପନ ପ୍ରକ୍ରିୟା ପ୍ରାରମ୍ଭ କରିବା ପାଇଁ %s କୁ ଚୟନ କରନ୍ତୁ।" #: ../loader/cdinstall.c:331 msgid "Scanning" msgstr "କ୍ରମବୀକ୍ଷଣ କରୁଅଛି" #: ../loader/cdinstall.c:331 ../loader/cdinstall.c:333 #, c-format msgid "Looking for installation images on CD device %s" msgstr "CD ଉପକରଣ %sରେ ସ୍ଥାପନ ପ୍ରତିଛବି ଖୋଜୁଅଛି" #: ../loader/cdinstall.c:428 #, c-format msgid "" "The %s disc was not found in any of your CDROM drives. Please insert the %s " "disc and press %s to retry." msgstr "" "ଆପଣଙ୍କ କୌଣସି CDROM ଡ୍ରାଇଭରେ %s ଡିସ୍କ ମିଳିଲା ନାହିଁ। ଦୟାକରି %s ଡିସ୍କକୁ ଭର୍ତ୍ତି କରନ୍ତୁ ଏବଂ " "ପୁନଃପ୍ରଚେଷ୍ଟା କରିବା ପାଇଁ %s କୁ ଦବାନ୍ତୁ।" #: ../loader/cdinstall.c:437 msgid "Disc Not Found" msgstr "ଡିସ୍କ ମିଳିଲା ନାହିଁ" #: ../loader/cdinstall.c:504 msgid "Cannot find kickstart file on CDROM." msgstr "CDROM ରେ କିକ୍-ଷ୍ଟାର୍ଟ ଫାଇଲ କୁ ପାଇ ପାରିବ ନାହିଁ।" #: ../loader/copy.c:51 ../loader/method.c:281 #, c-format msgid "Failed to read directory %s: %m" msgstr "%s ଡିରେକ୍ଟୋରିକୁ ପଢିବାରେ ଅସଫଳ: %m" #: ../loader/driverdisk.c:141 msgid "Loading" msgstr "ଧାରଣ କରୁଅଛି" #: ../loader/driverdisk.c:141 msgid "Reading driver disk..." msgstr "ଡ୍ରାଇଭର ଡିସ୍କକୁ ପଢୁଅଛି..." #: ../loader/driverdisk.c:240 ../loader/driverdisk.c:272 msgid "Driver Disk Source" msgstr "ଡ୍ରାଇଭର ଡିସ୍କ ଉତ୍ସ" #: ../loader/driverdisk.c:241 msgid "" "You have multiple devices which could serve as sources for a driver disk. " "Which would you like to use?" msgstr "" "ଆପଣଙ୍କ ନିକଟରେ ଏକାଧିକ ଉପକରଣ ଅଛି ଯାହାକି ଗୋଟିଏ ଡ୍ରାଇଭର ଡିସ୍କ ପାଇଁ ଉତ୍ସ ଭାବରେ କାର୍ଯ୍ଯ " "କରିପାରିବ। ଆପଣ କେଉଁ ଉପକରଣକୁ ବ୍ଯବହାର କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../loader/driverdisk.c:273 msgid "" "There are multiple partitions on this device which could contain the driver " "disk image. Which would you like to use?" msgstr "" "ଏହି ଉପକରଣରେ ଏକାଧିକ ବିଭାଜନ ଅଛି ଯାହାକି ଡ୍ରାଇଭର ଡିସ୍କ ପ୍ରତିଛବିକୁ ଧାରଣ କରି ଥାଇପାରେ। ଆପଣ କେଉଁ " "ଉପକରଣକୁ ବ୍ଯବହାର କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../loader/driverdisk.c:308 msgid "Failed to mount partition." msgstr "ବିଭାଜନକୁ ଆରୋହିତ କରିବାରେ ବିଫଳ" #: ../loader/driverdisk.c:313 msgid "Select driver disk image" msgstr "ଡ୍ରାଇଭର ଡିସ୍କ ପ୍ରତିଛବିକୁ ଚୟନ କରନ୍ତୁ" #: ../loader/driverdisk.c:314 msgid "Select the file which is your driver disk image." msgstr "ସେହି ଫାଇଲକୁ ଚୟନ କରନ୍ତୁ ଯାହାକି ଆପଣଙ୍କ ଡ୍ରାଇଭର ଡିସ୍କ ର ପ୍ରତିଛବି।" #: ../loader/driverdisk.c:343 msgid "Failed to load driver disk from file." msgstr "ଫାଇଲ ରୁ ଡ୍ରାଇଭର ଡିସ୍କକୁ ଧାରଣ କରିବାରେ ଅସଫଳ।" #: ../loader/driverdisk.c:355 #, c-format msgid "Insert your driver disk into /dev/%s and press \"OK\" to continue." msgstr "ଆପଣଙ୍କ ଡ୍ରାଇଭର ଡିସ୍କକୁ /dev/%s ରେ ଭର୍ତ୍ତି କରନ୍ତୁ ଏବଂ ଆଗକୁ ବଢିବା ପାଇଁ \"ଠିକ ଅଛି\" ବଟନକୁ ଦବାନ୍ତୁ।" #: ../loader/driverdisk.c:361 msgid "Insert Driver Disk" msgstr "ଡ୍ରାଇଭର ଡିସ୍କକୁ ଭର୍ତ୍ତି କରନ୍ତୁ" #: ../loader/driverdisk.c:374 msgid "Failed to mount driver disk." msgstr "ଡ୍ରାଇଭର ଡିସ୍କକୁ ମାଉଣ୍ଟ କରିବାରେ ବିଫଳ।" #: ../loader/driverdisk.c:382 #, c-format msgid "Driver disk is invalid for this release of %s." msgstr "%s ର ଏହି ସଂସ୍କରଣ ପାଇଁ ଡ୍ରାଇଭର ଡିସ୍କ ଅବୈଧ ଅଟେ।" #: ../loader/driverdisk.c:445 msgid "Manually choose" msgstr "ହସ୍ତକୃତ ଭାବରେ ଚୟନ କରନ୍ତୁ" #: ../loader/driverdisk.c:446 msgid "Load another disk" msgstr "ଆଉ ଗୋଟିଏ ଡିସ୍କକୁ ଧାରଣ କରନ୍ତୁ" #: ../loader/driverdisk.c:447 msgid "" "No devices of the appropriate type were found on this driver disk. Would " "you like to manually select the driver, continue anyway, or load another " "driver disk?" msgstr "" "ଏହି ଡ୍ରାଇଭର ଡିସ୍କରେ ଉପଯୁକ୍ତ ପ୍ରକାରର କୌଣସି ଉପକରଣ ନାହିଁ। ଆପଣ ହସ୍ତକୃତ ଭାବରେ ଡ୍ରାଇଭରକୁ ଚୟନ " "କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି, ତଥାପି ଆଗକୁ ବଢିବା ପାଇଁ ଚାହୁଁଛନ୍ତି, କିମ୍ବା ଅନ୍ଯ ଗୋଟିଏ ଡିସ୍କ ଧାରଣ କରିବା ପାଇଁ " "ଚାହୁଁଛନ୍ତି?" #: ../loader/driverdisk.c:485 msgid "Driver disk" msgstr "ଡ୍ରାଇଭର ଡିସ୍କ" #: ../loader/driverdisk.c:486 msgid "Do you have a driver disk?" msgstr "ଆପଣଙ୍କ ପାଖରେ ଗୋଟିଏ ଡ୍ରାଇଭର ଡିସ୍କ ଅଛି କି?" #: ../loader/driverdisk.c:495 msgid "More Driver Disks?" msgstr "ଅଧିକ ଡ୍ରାଇଭର ଡିସ୍କ?" #: ../loader/driverdisk.c:496 msgid "Do you wish to load any more driver disks?" msgstr "ଆପଣ ଆହୁରି ଅଧିକ ଡ୍ରାଇଭର ଡିସ୍କ ଭର୍ତ୍ତି କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି?" #: ../loader/driverdisk.c:541 ../loader/driverdisk.c:578 #: ../loader/hdinstall.c:384 ../loader/kickstart.c:132 #: ../loader/kickstart.c:142 ../loader/kickstart.c:185 #: ../loader/kickstart.c:532 ../loader/modules.c:335 ../loader/modules.c:347 #: ../loader/net.c:1414 ../loader/net.c:1437 ../loader/nfsinstall.c:331 #: ../loader/urlinstall.c:423 ../loader/urlinstall.c:432 #: ../loader/urlinstall.c:441 msgid "Kickstart Error" msgstr "କିକ-ଷ୍ଟାର୍ଟ ତୃଟି" #: ../loader/driverdisk.c:542 #, c-format msgid "Unknown driver disk kickstart source: %s" msgstr "ଅଜଣା ଡ୍ରାଇଭର ଡିସ୍କ କିକ-ଷ୍ଟାର୍ଟ ଉତ୍ସ: %s" #: ../loader/driverdisk.c:579 #, c-format msgid "" "The following invalid argument was specified for the kickstart driver disk " "command: %s:%s" msgstr "କିକ-ଷ୍ଟାର୍ଟ ଡ୍ରାଇଭର ଡିସ୍କ ନିର୍ଦ୍ଦେଶ ପାଇଁ ନିମ୍ନଲିଖିତ ଅବୈଧ ସ୍ବତନ୍ତ୍ରଚର ମାନ ଉଲ୍ଲେଖ କରାଯାଇଛି: %s:%s" #: ../loader/driverselect.c:67 #, c-format msgid "" "Please enter any parameters which you wish to pass to the %s module " "separated by spaces. If you don't know what parameters to supply, skip this " "screen by pressing the \"OK\" button." msgstr "" "ଦୟାକରି ସେହି ପାରାମିଟର ମାନଙ୍କୁ ଭରଣ କରନ୍ତୁ ଯାହାକୁ ଆପଣ ସ୍ଥାନ ଦ୍ବାରା ପୃଥକ ହୋଇଥିବା %s ଏକକାଂଶକୁ " "ପଠାଇବା ପାଇଁ ଚାହୁଁଛନ୍ତି। କେଉଁ ପାରାମିଟର ଯୋଗାଇବା ପାଇଁ ହେବ ଯଦି ଆପଣ ତାହା ଜାଣି ନାହାଁନ୍ତି, " "ତାହାହେଲେ \"ଠିକ ଅଛି\" ବଟନକୁ ଦବାଇ ଏହା ପରଦାକୁ ଏଡାଇ ଦିଅନ୍ତୁ।" #: ../loader/driverselect.c:91 msgid "Enter Module Parameters" msgstr "ଏକକାଂଶ ପାରାମିଟର କୁ ଭରଣ କରନ୍ତୁ" #: ../loader/driverselect.c:178 msgid "No drivers found" msgstr "କୌଣସି ଡ୍ରାଇଭର ମିଳିଲା ନାହିଁ" #: ../loader/driverselect.c:178 msgid "Load driver disk" msgstr "ଡ୍ରାଇଭର ଡିସ୍କକୁ ଧାରଣ କରନ୍ତୁ" #: ../loader/driverselect.c:179 msgid "" "No drivers were found to manually insert. Would you like to use a driver " "disk?" msgstr "" "ହସ୍ତକୃତ ଭାବରେ ଭର୍ତ୍ତି କରିବା ପାଇଁ କୌଣସି ଡ୍ରାଇଭର ମିଳିଲା ନାହିଁ। ଆପଣ ଗୋଟିଏ ଡ୍ରାଇଭର ଡିସ୍କକୁ ବ୍ଯବହାର " "କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି?" #: ../loader/driverselect.c:197 msgid "" "Please select the driver below which you wish to load. If it does not " "appear and you have a driver disk, press F2." msgstr "" "ଦୟାକରି ଆପଣ ଧାରଣ କରିବାକୁ ଚାହୁଁଥିବା ଡ୍ରାଇଭରକୁ ନିମ୍ନ ତାଲିକାରୁ ଚୟନ କରନ୍ତୁ। ଯଦି ଏହା ଦୃଶ୍ଯମାନ ନ ହୁଏ " "ଏବଂ ଆପଣଙ୍କ ନିକଟରେ ଗୋଟିଏ ଡ୍ରାଇଭର ଡିସ୍କ ଅଛି, ତାହାହେଲେ F2 ଦବାନ୍ତୁ।" #: ../loader/driverselect.c:206 msgid "Specify optional module arguments" msgstr "ବୈକଲ୍ପିକ ଏକକାଂଶ ତର୍କ କୁ ନିର୍ଦ୍ଦିଷ୍ଟ କରନ୍ତୁ" #: ../loader/driverselect.c:234 msgid "Select Device Driver to Load" msgstr "ଧାରଣ କରିବା ପାଇଁ ଉପକରଣ ଚାଳକ କୁ ଚୟନ କରନ୍ତୁ" #: ../loader/hdinstall.c:144 msgid "" "An error occured finding the installation image on your hard drive. Please " "check your images and try again." msgstr "" "ଆପଣଙ୍କ ହାର୍ଡ ଡ୍ରାଇଭରେ ସ୍ଥାପନ ପ୍ରତିଛବିକୁ ଖୋଜିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିଲିଖିତ ହେଲା. ଦୟାକରି ଆପଣଙ୍କ " "ପ୍ରତିଛବିକୁ ଯାଞ୍ଚ କରନ୍ତୁ ଏବଂ ପୁନର୍ବାର ପ୍ରଚେଷ୍ଟା କରନ୍ତୁ." #: ../loader/hdinstall.c:232 msgid "" "You don't seem to have any hard drives on your system! Would you like to " "configure additional devices?" msgstr "" "ଆପଣଙ୍କ ତନ୍ତ୍ରରେ କୌଣସି ହାର୍ଡ ଡ୍ରାଇଭ ଥିବାପରି ଜଣାପଡୁ ନାହିଁ! ଆପଣ ଅତିରିକ୍ତ ଉପକରଣ ମାନଙ୍କୁ ବିନ୍ଯାସ " "କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି?" #: ../loader/hdinstall.c:246 #, c-format msgid "" "What partition and directory on that partition holds the installation image " "for %s? If you don't see the disk drive you're using listed here, press F2 " "to configure additional devices." msgstr "" "ସେହି ବିଭାଜନରେ କେଉଁ ନିର୍ଦ୍ଦିଷ୍ଟ ବିଭାଜନ ଏବଂ ଡିରେକ୍ଟୋରି %s ପାଇଁ ସ୍ଥାପନ ପ୍ରତିଛବି ମାନଙ୍କୁ ଧାରଣ କରିଅଛି? " "ଏହି ତାଲିକାରେ ଆପଣ ବ୍ଯବହାର କରୁଥିବା ଡିସ୍କ ଡ୍ରାଇଭକୁ ଯଦି ଆପଣ ଦେଖୁ ନାହାଁନ୍ତି, ତାହାହେଲେ ଅତିରିକ୍ତ " "ଉପକରଣ ମାନଙ୍କୁ ବିନ୍ଯାସ କରିବା ପାଇଁ F2 ବଟନକୁ ଦବାନ୍ତୁ।" #: ../loader/hdinstall.c:273 msgid "Directory holding image:" msgstr "ପ୍ରତିଛବି ମାନଙ୍କୁ ଧାରଣ କରିଥିବା ଡିରେକ୍ଟୋରି:" #: ../loader/hdinstall.c:301 msgid "Select Partition" msgstr "ବିଭାଜନ ର ଚୟନ କରନ୍ତୁ" #: ../loader/hdinstall.c:353 #, c-format msgid "Device %s does not appear to contain an installation image." msgstr "%s ଉପକରଣଟି ସ୍ଥାପନ ପ୍ରତିଛବିକୁ ଧାରଣ କରିଥିବା ଭଳି ଜଣା ପଡୁନାହିଁ." #: ../loader/hdinstall.c:385 #, c-format msgid "Bad argument to HD kickstart method command %s: %s" msgstr "HD କିକ୍-ଷ୍ଟାର୍ଟ ବିଧି ନିର୍ଦ୍ଦେଶ %s ପାଇଁ ଖରାପ ସ୍ବତନ୍ତ୍ରଚର: %s" #: ../loader/hdinstall.c:455 ../loader/hdinstall.c:511 msgid "Cannot find kickstart file on hard drive." msgstr "ହାର୍ଡ ଡ୍ରାଇଭ ରେ କିକ୍-ଷ୍ଟାର୍ଟ ଫାଇଲ କୁ ପାଇ ପାରିବ ନାହିଁ।" #: ../loader/hdinstall.c:498 #, c-format msgid "Cannot find hard drive for BIOS disk %s" msgstr "%s BIOS ଡିସ୍କ ପାଇଁ ହାର୍ଡ ଡ୍ରାଇଭ ଖୋଜି ପାରିବ ନାହିଁ" #: ../loader/kbd.c:136 msgid "Keyboard Type" msgstr "କି-ବୋର୍ଡ ପ୍ରକାର" #: ../loader/kbd.c:137 msgid "What type of keyboard do you have?" msgstr "ଆପଣଙ୍କ ପାଖରେ କେଉଁ ପ୍ରକାର ର କି-ବୋର୍ଡ ଅଛି?" #: ../loader/kickstart.c:133 #, c-format msgid "Error opening kickstart file %s: %m" msgstr "%s କିକ୍-ଷ୍ଟାର୍ଟ ଫାଇଲ କୁ ଖୋଲିବାରେ ତୃଟି: %m" #: ../loader/kickstart.c:143 #, c-format msgid "Error reading contents of kickstart file %s: %m" msgstr "%s କିକ୍-ଷ୍ଟାର୍ଟ ଫାଇଲ ର ଅନ୍ତର୍ବସ୍ତୁ ପଢିବା ସମୟରେ ତୃଟି: %m" #: ../loader/kickstart.c:186 #, c-format msgid "Error in %s on line %d of kickstart file %s." msgstr "%s କିକ୍-ଷ୍ଟାର୍ଟ ଫାଇଲ ର %d ରେଖା ରେ %s ତୃଟି।" #: ../loader/kickstart.c:285 msgid "Cannot find ks.cfg on removable media." msgstr "ks.cfg କୁ ଅପସାରଣୀୟ ସଞ୍ଚାର ମାଧ୍ଯମ ପାଇବେ ନାହିଁ." #: ../loader/kickstart.c:380 msgid "" "Unable to download the kickstart file. Please modify the kickstart " "parameter below or press Cancel to proceed as an interactive installation." msgstr "" "କିକ-ଷ୍ଟାର୍ଟ ଫାଇଲକୁ ଆହରଣ କରିବାରେ ଅସମର୍ଥ। ଦୟାକରି ତଳେ ଥିବା କିକ-ଷ୍ଟାର୍ଟ ପାରାମିଟରକୁ ବଦଳାନ୍ତୁ " "କିମ୍ବା ଗୋଟିଏ ପାରସ୍ପରିକ କ୍ରିୟାକ୍ଷମ ସ୍ଥାପନ କରିବା ପାଇଁ ବାତିଲ କରନ୍ତୁ ବଟନକୁ ଦବାନ୍ତୁ।" #: ../loader/kickstart.c:389 msgid "Error downloading kickstart file" msgstr "କିକ-ଷ୍ଟାର୍ଟ ଫାଇଲ ଆହରଣ କରିବା ସମୟରେ ତୃଟି" #: ../loader/kickstart.c:533 #, c-format msgid "Bad argument to shutdown kickstart method command %s: %s" msgstr "କିକ୍-ଷ୍ଟାର୍ଟ ବିଧି ନିର୍ଦ୍ଦେଶ %s କୁ ବନ୍ଦ କରିବା ପାଇଁ ଖରାପ ସ୍ବତନ୍ତ୍ରଚର: %s" #: ../loader/lang.c:64 #, c-format msgid "Welcome to %s for %s - Rescue Mode" msgstr "%s ପାଇଁ %s କୁ ସ୍ବାଗତମ - ରକ୍ଷଣ ଧାରା" #: ../loader/lang.c:65 ../loader/loader.c:223 msgid " / between elements | selects | next screen " msgstr " / ତତ୍ବ ମାନଙ୍କ ମଧ୍ଯରେ | ଚୟନ କରନ୍ତୁ | ପରବର୍ତ୍ତୀ ପରଦା " #: ../loader/lang.c:375 msgid "Choose a Language" msgstr "ଗୋଟିଏ ଭାଷା ର ଚୟନ କରନ୍ତୁ" #: ../loader/loader.c:125 msgid "Local CD/DVD" msgstr "ସ୍ଥାନୀୟ ସି.ଡି./ଡି.ଭି.ଡି" #: ../loader/loader.c:126 msgid "Hard drive" msgstr "ହାର୍ଡ ଡ୍ରାଇଭ" #: ../loader/loader.c:127 msgid "NFS directory" msgstr "NFS ଡିରେକ୍ଟୋରି" #: ../loader/loader.c:429 ../loader/loader.c:468 msgid "Update Disk Source" msgstr "ଡିସ୍କ ଉତ୍ସକୁ ଅଦ୍ଯତନ କରନ୍ତୁ" #: ../loader/loader.c:430 msgid "" "You have multiple devices which could serve as sources for an update disk. " "Which would you like to use?" msgstr "" "ଆପଣଙ୍କ ନିକଟରେ ଏକାଧିକ ଉପକରଣ ଅଛି ଯାହାକି ଗୋଟିଏ ଅଦ୍ଯତିତ ଡିସ୍କ ପାଇଁ ଉତ୍ସ ଭାବରେ କାର୍ଯ୍ଯ କରିପାରେ। " "ଆପଣ କେଉଁ ଉପକରଣକୁ ବ୍ଯବହାର କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../loader/loader.c:469 msgid "" "There are multiple partitions on this device which could contain the update " "disk image. Which would you like to use?" msgstr "" "ଏହି ଉପକରଣରେ ଏକାଧିକ ବିଭାଜନ ଅଛି ଯାହାକି ଅଦ୍ୟତିତ ଡିସ୍କ ପ୍ରତିଛବିକୁ ଧାରଣ କରି ଥାଇପାରେ. ଆପଣ କେଉଁ " "ଉପକରଣକୁ ବ୍ଯବହାର କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../loader/loader.c:487 #, c-format msgid "Insert your updates disk into %s and press \"OK\" to continue." msgstr "ଆପଣଙ୍କ ଅଦ୍ଯତିତ ଡିସ୍କକୁ %s ରେ ଭର୍ତ୍ତି କରନ୍ତୁ ଏବଂ ଆଗକୁ ବଢିବା ପାଇଁ \"ଠିକ ଅଛି\" କୁ ଦବାନ୍ତୁ." #: ../loader/loader.c:493 msgid "Updates Disk" msgstr "ଡିସ୍କ ର ଅଦ୍ଯତନ କରୁଅଛି" #: ../loader/loader.c:510 msgid "Failed to mount updates disk" msgstr "ଅଦ୍ଯତିତ ଡିସ୍କକୁ ଆରୋହିତ କରିବାରେ ବିଫଳ" #: ../loader/loader.c:515 msgid "Updates" msgstr "ଅଦ୍ଯତନ" #: ../loader/loader.c:515 msgid "Reading anaconda updates..." msgstr "ଆନାକୋଣ୍ଡା ଅଦ୍ଯତନ ମାନଙ୍କୁ ପଢୁଛି..." #: ../loader/loader.c:551 msgid "" "Unable to download the updates image. Please modify the updates location " "below or press Cancel to proceed without updates.." msgstr "" "ଅଦ୍ୟତନର ପ୍ରତିଛବିଟ ଫାଇଲକୁ ଆହରଣ କରିବାରେ ଅସମର୍ଥ। ଦୟାକରି ତଳେ ଅଦ୍ୟତନ ଠିକଣାକୁ ପରିବର୍ତ୍ତନ କରନ୍ତୁ " "କିମ୍ବା ଅଦ୍ୟତନ ବିନା ଆଗକୁ ବଢ଼ିବା ପାଇଁ ବାତିଲକରନ୍ତୁକୁ ଦବାନ୍ତୁ.." #: ../loader/loader.c:560 msgid "Error downloading updates image" msgstr "ଅଦ୍ୟତିତ ପ୍ରତିଛବି ଫାଇଲ ଆହରଣ କରିବା ସମୟରେ ତୃଟି" #: ../loader/loader.c:1175 #, c-format msgid "You do not have enough RAM to install %s on this machine." msgstr "ଏହି ଉପକରଣରେ %s କୁ ସ୍ଥାପନ କରିବା ପାଇଁ ଯଥେଷ୍ଟ RAM ନାହିଁ।" #: ../loader/loader.c:1235 msgid "Media Detected" msgstr "ମାଧ୍ଯମ କୁ ଖୋଜି ପାରିଲା" #: ../loader/loader.c:1236 msgid "Local installation media detected..." msgstr "ସ୍ଥାନୀୟ ସ୍ଥାପନ ମାଧ୍ଯମ କୁ ଖୋଜି ପାରିଲା..." #: ../loader/loader.c:1357 msgid "Rescue Method" msgstr "ରକ୍ଷଣ ପ୍ରଣାଳୀ" #: ../loader/loader.c:1358 msgid "Installation Method" msgstr "ସ୍ଥାପନ ପ୍ରଣାଳୀ" #: ../loader/loader.c:1360 msgid "What type of media contains the rescue image?" msgstr "ରକ୍ଷଣ ପ୍ରତିଛବି ମାନଙ୍କୁ କେଉଁ ପ୍ରକାର ର ସଞ୍ଚାରମାଧ୍ଯମ ଧାରଣ କରିଛି?" #: ../loader/loader.c:1362 msgid "What type of media contains the installation image?" msgstr "କେଉଁ ପ୍ରକାରର ସଞ୍ଚାରମାଧ୍ଯମ ସ୍ଥାପନ ପ୍ରତିଛବି ମାନଙ୍କୁ ଧାରଣ କରିଛି?" #: ../loader/loader.c:1393 msgid "No driver found" msgstr "କୌଣସି ଚାଳକ ମିଳିଲା ନାହିଁ" #: ../loader/loader.c:1393 msgid "Select driver" msgstr "ଚାଳକ କୁ ଚୟନ କରନ୍ତୁ" #: ../loader/loader.c:1394 msgid "Use a driver disk" msgstr "ଗୋଟିଏ ଚାଳକ ଡିସ୍କକୁ ବ୍ଯବହାର କରନ୍ତୁ" #: ../loader/loader.c:1395 msgid "" "Unable to find any devices of the type needed for this installation type. " "Would you like to manually select your driver or use a driver disk?" msgstr "" "ଏହି ସ୍ଥାପନ ପ୍ରକ୍ରିୟା ପାଇଁ ଉପଯୁକ୍ତ ପ୍ରକାରର କୌଣସି ଉପକରଣକୁ ପାଇବାରେ ଅସମର୍ଥ। ଆପଣ ହସ୍ତକୃତ ଭାବରେ " "ଆପଣଙ୍କ ଡ୍ରାଇଭରକୁ ଚୟନ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି ଗୋଟିଏ ଡ୍ରାଇଭର ଡିସ୍କ ବ୍ଯବହାର କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: ../loader/loader.c:1679 msgid "The following devices have been found on your system." msgstr "ନିମ୍ନଲିଖିତ ଉପକରଣ ଗୁଡିକ ଆପଣଙ୍କ ତନ୍ତ୍ରରୁ ମିଳିଲା।" #: ../loader/loader.c:1681 msgid "" "No device drivers have been loaded for your system. Would you like to load " "any now?" msgstr "" "ଆପଣଙ୍କ ତନ୍ତ୍ର ପାଇଁ କୌଣସି ଉପକରଣ ଚାଳକ ସ୍ଥାପନ କରାଯାଇ ନାହିଁ। ଆପଣ କୌଣସି ଗୋଟିଏ ଚାଳକ କୁ ବର୍ତମାନ " "ଧାରଣ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି କି?" #: ../loader/loader.c:1685 msgid "Devices" msgstr "ଉପକରଣ ମାନ" #: ../loader/loader.c:1686 msgid "Done" msgstr "ସମ୍ପୂର୍ଣ୍ଣ" #: ../loader/loader.c:1687 msgid "Add Device" msgstr "ଉପକରଣକୁ ଯୋଗ କରନ୍ତୁ" #: ../loader/loader.c:1878 #, c-format msgid "loader has already been run. Starting shell.\n" msgstr "ଭାରକ କୁ ପୂର୍ବରୁ ଚଳାଯାଇଛି। ଆବରଣ କୁ ପ୍ରାରମ୍ଭ କରୁଅଛି।\n" #: ../loader/loader.c:2248 #, c-format msgid "Running anaconda %s, the %s rescue mode - please wait...\n" msgstr "ଆନାକୋଣ୍ଡା %s କୁ ଚଳାଉଛି, %s ରକ୍ଷଣ ଧାରା - ଦୟାକରି ଅପେକ୍ଷା କରନ୍ତୁ...\n" #: ../loader/loader.c:2250 #, c-format msgid "Running anaconda %s, the %s system installer - please wait...\n" msgstr "ଆନାକୋଣ୍ଡା %s କୁ ଚଳାଉଛି, %s ତନ୍ତ୍ର ସ୍ଥାପକ - ଦୟାକରି ଅପେକ୍ଷା କରନ୍ତୁ...\n" #: ../loader/mediacheck.c:62 #, c-format msgid "Unable to find install image %s" msgstr "%s ସ୍ଥାପନ ପ୍ରତିଛବିକୁ ଖୋଜିବା ରେ ଅସମର୍ଥ" #: ../loader/mediacheck.c:68 #, c-format msgid "Checking \"%s\"..." msgstr "\"%s\" କୁ ଯାଞ୍ଚ କରୁଅଛି ..." #: ../loader/mediacheck.c:70 #, c-format msgid "Checking media now..." msgstr "ସଞ୍ଚାରମାଧ୍ଯମ କୁ ବର୍ତମାନ ଯାଞ୍ଚ କରୁଅଛି..." #: ../loader/mediacheck.c:102 msgid "" "Unable to read the disc checksum from the primary volume descriptor. This " "probably means the disc was created without adding the checksum." msgstr "" "ପ୍ରାଥମିକ ଘନଫଳ ବର୍ଣ୍ଣନକରୁ ଡିସ୍କ ଚେକ-ଶମକୁ ପଢାବାରେ ଅସମର୍ଥ। ଏହାର ଅର୍ଥ ସମ୍ଭବତଃ ଏହା ଯେ ଡିସ୍କରେ " "ଚେକ-ଶମକୁ ଯୋଗ ନକରି ଏହାକୁ ସୃଷ୍ଟି କରାଯାଇଛି।" #: ../loader/mediacheck.c:109 msgid "" "The image which was just tested has errors. This could be due to a corrupt " "download or a bad disc. If applicable, please clean the disc and try " "again. If this test continues to fail you should not continue the install." msgstr "" "ଯେଉଁ ପ୍ରତିଛବିକୁ ବର୍ତ୍ତମାନ ପରୀକ୍ଷଣ କରାଗଲା ସେଥିରେ ତୃଟି ଅଛି। ଏହା ତୃଟିଯୁକ୍ତ ଡାଉନଲୋଡ କିମ୍ବା ଖରାପ " "ଡିସ୍କ ଯୋଗୁଁ ହୋଇ ଥାଇପାରେ। ଯଦି ପ୍ରୟୋଗ ଯୋଗ୍ଯ, ତାହାହେଲେ ଦୟାକରି ଡିସ୍କକୁ ସଫା କରନ୍ତୁ ଏବଂ ପୁନର୍ବାର " "ପ୍ରଚେଷ୍ଟା କରନ୍ତୁ। ଯଦି ଏହି ପରୀକ୍ଷଣ ବାରମ୍ବାର ବିଫଳ ହୁଏ, ତାହାହେଲେ ଆପଣ ସ୍ଥାପନ ପ୍ରକ୍ରିୟାକୁ ଜାରି " "ରଖିବା ଉଚିତ ନୁହେଁ।" #: ../loader/mediacheck.c:117 msgid "Success" msgstr "ସଫଳ" #: ../loader/mediacheck.c:118 msgid "" "The image which was just tested was successfully verified. It should be OK " "to install from this media. Note that not all media/drive errors can be " "detected by the media check." msgstr "" "ଏବେ ପରିକ୍ଷା କରାଯାଇଥିବା ପ୍ରତିଛବିଟି ସଫଳଭାବେ ଯାଞ୍ଚ କରା ସରିଛି। ଏହି ମାଧ୍ଯମରୁ ସ୍ଥାପନ କରିବା ଉଚିତ " "ହେବ। ଦୃଷ୍ଟି ଦିଅନ୍ତୁ ଯେ ମାଧ୍ଯମ ଯାଞ୍ଚ ଦ୍ୱାରା ସମସ୍ତ ମାଧ୍ଯମ/ଆଧାର ତୃଟି ଖୋଜି ହେବ ନାହିଁ।" #: ../loader/method.c:324 #, c-format msgid "" "Would you like to perform a checksum test of the ISO image:\n" "\n" " %s?" msgstr "" "ଆପଣ ISO ପ୍ରତିଛବିର ଗୋଟିଏ ଚେକ-ଶମ ପରୀକ୍ଷଣ ସମ୍ପାଦନ କରିବା ପାଇଁ ଚାହାଁନ୍ତି କି:\n" "\n" " %s?" #: ../loader/method.c:327 msgid "Checksum Test" msgstr "Checksum ପରୀକ୍ଷଣ" #: ../loader/modules.c:336 #, c-format msgid "Bad argument to device kickstart method command %s: %s" msgstr "%s ଉପକରଣ କିକ୍-ଷ୍ଟାର୍ଟ ପ୍ରକ୍ରିୟା ନିର୍ଦ୍ଦେଶ ପାଇଁ ଖରାପ ସ୍ବତନ୍ତ୍ରଚର: %s" #: ../loader/modules.c:348 msgid "A module name must be specified for the kickstart device command." msgstr "କିକ-ଷ୍ଟାର୍ଟ ଉପକରଣ ନିର୍ଦ୍ଦେଶ ପାଇଁ ଗୋଟିଏ ଏକକାଂଶ ନାମ ଉଲ୍ଲେଖ କରାଯିବା ଉଚିତ।" #: ../loader/net.c:108 msgid "Invalid Prefix" msgstr "ଅବୈଧ ଉପସର୍ଗ" #: ../loader/net.c:109 msgid "" "Prefix must be between 1 and 32 for IPv4 networks or between 1 and 128 for " "IPv6 networks" msgstr "" "IPv4 ନେଟୱାର୍କ ପାଇଁ ଉପସର୍ଗ ମୂଲ୍ଯ ୧ ଏବଂ ୩୨ ମଧ୍ଯରେ ହେବା ଉଚିତ କିମ୍ବା IPv6 ନେଟୱାର୍କ ପାଇଁ ୧ " "ଏବଂ ୧୨୮ ମଧ୍ଯରେ ହେବା ଉଚିତ।" #: ../loader/net.c:409 ../loader/net.c:463 msgid "Network Error" msgstr "ନେଟୱାର୍କ ତୃଟି" #: ../loader/net.c:410 ../loader/net.c:464 msgid "There was an error configuring your network interface." msgstr "ଆପଣଙ୍କ ନେଟୱାର୍କ ଅନ୍ତରାପୃଷ୍ଠକୁ ବିନ୍ଯାସ କରିବା ସମୟରେ ଗୋଟିଏ ତୃଟି ପରିଲିଖିତ ହେଲା।" #: ../loader/net.c:507 msgid "Enable IPv6 support" msgstr "IPv6 ସହାୟତାକୁ ସକ୍ରିୟ କରନ୍ତୁ" #: ../loader/net.c:547 msgid "Configure TCP/IP" msgstr "TCP/IP କୁ ବିନ୍ଯାସ କରନ୍ତୁ" #: ../loader/net.c:606 msgid "Missing Protocol" msgstr "ଅନୁପସ୍ଥିତ ପ୍ରୋଟୋକଲ" #: ../loader/net.c:607 msgid "You must select at least one protocol (IPv4 or IPv6)." msgstr "ଆପଣ ଅତିକମରେ ଗୋଟିଏ ପ୍ରୋଟୋକଲ (IPv4 କିମ୍ବା IPv6) ଚୟନ କରିବା ଉଚିତ।" #: ../loader/net.c:614 msgid "IPv4 Needed for NFS" msgstr "NFS ପାଇଁ IPv4 ଆବଶ୍ୟକ" #: ../loader/net.c:615 msgid "NFS installation method requires IPv4 support." msgstr "NFS ସ୍ଥାପନ ପ୍ରଣାଳୀ IPv4 ସମର୍ଥନ ଆବଶ୍ୟକ କରିଥାଏ।" #: ../loader/net.c:717 msgid "IPv4 address:" msgstr "IPv4 ଠିକଣା:" #: ../loader/net.c:729 ../loader/net.c:796 tmp/netconfig.glade.h:1 msgid "/" msgstr "/" #: ../loader/net.c:784 msgid "IPv6 address:" msgstr "IPv6 ଠିକଣା:" #: ../loader/net.c:858 msgid "Name Server:" msgstr "ନାମ ସେବକ:" #: ../loader/net.c:897 msgid "" "Enter the IPv4 and/or the IPv6 address and prefix (address / prefix). For " "IPv4, the dotted-quad netmask or the CIDR-style prefix are acceptable. The " "gateway and name server fields must be valid IPv4 or IPv6 addresses." msgstr "" "IPv4 ଏବଂ/କିମ୍ବା IPv6 ଠିକଣା ଏବଂ ଉପସର୍ଗ (ଠିକଣା / ଉପସର୍ଗ) ଭରଣ କରନ୍ତୁ। IPv4 ପାଇଁ, ବିନ୍ଦୁ " "ଦ୍ବାରା ବିଭାଜିତ ନେଟମାସ୍କ କିମ୍ବା CIDR ଶୈଳୀରେ ଥିବା ଉପସର୍ଗ ଗୁଡିକ ଗ୍ରହଣୀୟ। ଗେଟ-ୱେ ଏବଂ ନାମ " "ସେବକ କ୍ଷେତ୍ର ଗୁଡିକ ବୈଧ IPv4 କିମ୍ବା IPv6 ଠିକଣା ହୋଇଥିବା ଉଚିତ।" #: ../loader/net.c:917 msgid "Manual TCP/IP Configuration" msgstr "ହସ୍ତକୃତ TCP/IP ବିନ୍ଯାସ" #: ../loader/net.c:1040 ../loader/net.c:1047 msgid "Missing Information" msgstr "ଅନୁପସ୍ଥିତ ସୂଚନା" #: ../loader/net.c:1041 msgid "You must enter both a valid IPv4 address and a network mask or CIDR prefix." msgstr "ଆପଣ ଉଭୟ ଗୋଟିଏ ବୈଧ IPv4 ଠିକଣା ଏବଂ ଗୋଟିଏ ନେଟମାସ୍କ କିମ୍ବା CIDR ଉପସର୍ଗକୁ ଭରଣ କରିବା ଉଚିତ।" #: ../loader/net.c:1048 msgid "You must enter both a valid IPv6 address and a CIDR prefix." msgstr "ଆପଣ ଉଭୟ ଗୋଟିଏ ବୈଧ IPv6 ଠିକଣା ଏବଂ ଗୋଟିଏ CIDR ଉପସର୍ଗକୁ ଭରଣ କରିବା ଉଚିତ।" #: ../loader/net.c:1415 #, c-format msgid "Bad argument to kickstart network command %s: %s" msgstr "ନେଟୱାର୍କ ନିର୍ଦ୍ଦେଶ %s କୁ କିକ-ଷ୍ଟାର୍ଟ କରିବା ପାଇଁ ଖରାପ ସ୍ବତନ୍ତ୍ରଚର: %s" #: ../loader/net.c:1438 #, c-format msgid "Bad bootproto %s specified in network command" msgstr "ନେଟୱାର୍କ ନିର୍ଦ୍ଦେଶରେ ଖରାପ ବୁଟପ୍ରୋଟୋ %s କୁ ଉଲ୍ଲେକ କରାଯାଇଛି" #: ../loader/net.c:1509 msgid "Seconds:" msgstr "ସେକଣ୍ଡ:" #: ../loader/net.c:1623 msgid "Networking Device" msgstr "ନେଟୱାର୍କିଙ୍ଗ ଉପକରଣ" #: ../loader/net.c:1624 msgid "" "You have multiple network devices on this system. Which would you like to " "install through?" msgstr "" "ଆପଣଙ୍କ ପାଖରେ ଏହି ତନ୍ତ୍ରରେ ଏକାଧିକ ନେଟୱାର୍କ ଉପକରଣ ଅଛି। ଆପଣ କାହାକୁ ସ୍ଥାପନ କରିବା ପାଇଁ " "ଚାହୁଁଛନ୍ତି?" #: ../loader/net.c:1628 msgid "Identify" msgstr "ଚିହ୍ନନ୍ତୁ" #: ../loader/net.c:1637 msgid "You can identify the physical port for" msgstr "ପାଇଁ ଆପଣ ଭୌତିକ ସଂଯୋଗିକୀକୁ ଚିହ୍ନିପାରିବେ" #: ../loader/net.c:1639 msgid "" "by flashing the LED lights for a number of seconds. Enter a number between " "1 and 30 to set the duration to flash the LED port lights." msgstr "" "କିଛି ସେକଣ୍ଡ ପାଇଁ LED ଆଲୋକକୁ ଉଜ୍ଜଳିତ କରିବା ଦ୍ୱାରା. LED ସଂଯୋଗିକୀ ଆଲୋକର ଝଲକ ସମୟ ସେଟକରିବା " "ପାଇଁ 1 ରୁ 30 ମଧ୍ଯରୁ କୌଣସି ଏକ ସଂଖ୍ୟା ଭରଣ କରନ୍ତୁ " #: ../loader/net.c:1649 msgid "Identify NIC" msgstr "NIC କୁ ଚିହ୍ନନ୍ତୁ" #: ../loader/net.c:1662 msgid "Invalid Duration" msgstr "ଅବୈଧ ଅବଧି" #: ../loader/net.c:1663 msgid "You must enter the number of seconds as an integer between 1 and 30." msgstr "1 ଏବଂ 30 ମଧ୍ଯରେ ଥିବା ପୂର୍ଣ୍ଣସଂଖ୍ୟାକୁ ସେକଣ୍ଡ ଆକାରରେ ଆପଣଙ୍କୁ ଭରଣ କରିବା ଉଚିତ." #: ../loader/net.c:1675 #, c-format msgid "Flashing %s port lights for %d seconds..." msgstr "%s ସଂଯୋଗିକୀ ଆଲୋକକୁ %d ସେକଣ୍ଡ ପାଇଁ ଉଜ୍ଜଳିତ କରୁଅଛି..." #: ../loader/net.c:1841 ../loader/net.c:1845 #, c-format msgid "Waiting for NetworkManager to configure %s...\n" msgstr "%sକୁ ବିନ୍ୟାସ କରିବା ପାଇଁ ନେଟୱର୍କ ପରିଚାଳକଙ୍କୁ ଅପେକ୍ଷା କରୁଅଛି...\n" #: ../loader/nfsinstall.c:64 msgid "NFS server name:" msgstr "NFS ସେବକ ନାମ:" #: ../loader/nfsinstall.c:68 #, c-format msgid "%s directory:" msgstr "%s ଡିରେକ୍ଟୋରି:" #: ../loader/nfsinstall.c:79 #, c-format msgid "Please enter the server name and path to your %s installation image." msgstr "ଆପଣଙ୍କର %s ସ୍ଥାପନ ପ୍ରତିଛବିରେ ଦୟାକରି ସର୍ଭର ନାମ ଏବଂ ପଥ ଭରଣ କରନ୍ତୁ." #: ../loader/nfsinstall.c:86 msgid "NFS Setup" msgstr "NFS ବ୍ଯବସ୍ଥା" #: ../loader/nfsinstall.c:245 msgid "That directory could not be mounted from the server." msgstr "ଡିରେକ୍ଟୋରିକୁ ସେବକରୁ ଆହରଣ କରି ପାରିଲା ନାହିଁ।" #: ../loader/nfsinstall.c:256 #, c-format msgid "That directory does not seem to contain a %s installation image." msgstr "ସେହି ଡିରେକ୍ଟୋରିଟି %s ସ୍ଥାପନ ପ୍ରତିଛବି ଧାରଣ କରିଥିବା ପରି ଜଣାପଡୁ ନାହିଁ." #: ../loader/nfsinstall.c:332 #, c-format msgid "Bad argument to NFS kickstart method command %s: %s" msgstr "ଏନ.ଏଫ.ଏସ. କିକ-ଷ୍ଟାର୍ଟ ପଦ୍ଧତି ନିର୍ଦ୍ଦେଶ %s ପାଇଁ ଖରାପ ସ୍ବତନ୍ତ୍ରଚର: %s" #: ../loader/telnetd.c:89 ../loader/telnetd.c:128 msgid "Telnet" msgstr "ଟେଲନେଟ" #: ../loader/telnetd.c:89 msgid "Waiting for telnet connection..." msgstr "ଟେଲନେଟ ସଂଯୋଗ ପାଇଁ ଅପେକ୍ଷା କରୁଅଛି..." #: ../loader/telnetd.c:128 msgid "Running anaconda via telnet..." msgstr "ଟେଲନେଟ ଦ୍ବାରା ଆନାକୋଣ୍ଡା କୁ ଚଳାଉଛି..." #: ../loader/urlinstall.c:84 #, c-format msgid "Unable to retrieve %s://%s%s." msgstr "%s କୁ ପୁନରୁଦ୍ଧାର କରିବାରେ ଅସମର୍ଥ://%s/%s." #: ../loader/urlinstall.c:176 msgid "Unable to retrieve the install image." msgstr "ସ୍ଥାପନ ପ୍ରତିବମ୍ବ କୁ ପୁନରୁଦ୍ଧାର କରିବାରେ ଅସମର୍ଥ।" #: ../loader/urlinstall.c:424 #, c-format msgid "Bad argument to Url kickstart method command %s: %s" msgstr "%s Url କିକଷ୍ଟାର୍ଟ ପ୍ରଣାଳୀ ର ସନ୍ଦେଶ ପାଇଁ ଖରାପ ସ୍ବତନ୍ତ୍ରଚର: %s" #: ../loader/urlinstall.c:433 msgid "Must supply a --url argument to Url kickstart method." msgstr "Url କିକଷ୍ଟାର୍ଟ ପ୍ରଣାଳୀ କୁ ଗୋଟିଏ --url ସ୍ବତନ୍ତ୍ରଚର କୁ ଯୋଗାଇବା ଉଚିତ।" #: ../loader/urlinstall.c:442 #, c-format msgid "Unknown Url method %s" msgstr "ଅଜଣା Url ପ୍ରଣାଳୀ %s" #: ../loader/urls.c:235 ../loader/urls.c:237 ../loader/urls.c:240 msgid "Retrieving" msgstr "ପୁନରୁଦ୍ଧାର କରନ୍ତୁ" #: ../loader/urls.c:295 #, c-format msgid "Please enter the URL containing the %s installation image on your server." msgstr "ଦୟାକରି ଆପଣଙ୍କ ସର୍ଭରରେ %s ସ୍ଥାପନ ପ୍ରତିଛବି ଧାରଣ କରିଥିବା URLକୁ ଭରଣକରନ୍ତୁ." #: ../loader/urls.c:321 msgid "URL Setup" msgstr "URL ବ୍ଯବସ୍ଥା" #: ../loader/urls.c:329 msgid "You must enter a URL." msgstr "ଆପଣ ଗୋଟିଏ URLକୁ ଭରଣ କରିବା ଉଚିତ." #: ../loader/urls.c:335 msgid "URL must be either an ftp or http URL" msgstr "URL ନିଶ୍ଚିତ ରୂପେ ftp କିମ୍ୱା http URL ହୋଇଥିବା ଆବଶ୍ୟକ" #: ../loader/urls.c:346 msgid "Unknown Host" msgstr "ଅଜଣା ଆଧାର" #: ../loader/urls.c:347 #, c-format msgid "%s is not a valid hostname." msgstr "%s ଟି ଗୋଟିଏ ବୈଧ ଆଧର ନାମ ନୁହେଁ।" #: ../loader/windows.c:65 msgid "Loading SCSI driver" msgstr "SCSI ଡ୍ରାଇଭରକୁ ଧାରଣ କରୁଅଛି" #: ../loader/windows.c:66 #, c-format msgid "Loading %s driver..." msgstr "%s ଚାଳକ କୁ ଧାରଣ କରୁଅଛି..." #: tmp/GroupSelector.glade.h:1 msgid "" "Some packages associated with this group are not required to be installed " "but may provide additional functionality. Please choose the packages which " "you would like to have installed." msgstr "" "ଏହି ସମୁହ ସହିତ ନିହିତ କିଛି ପ୍ୟାକେଜଗୁଡିକ ସ୍ଥାପନ କରିବା ଆବଶ୍ୟକ ନାହିଁ କିନ୍ତୁ ଅତିରିକ୍ତ କାର୍ଯ୍ୟକାରିତା ପ୍ରଦାନ " "କରିପାରେ। ଦୟାକରି ଆପଣ ସ୍ଥାପନ କରିବାପାଇଁ ଇଚ୍ଛାକରୁଥିବା ପ୍ୟାକେଜଗୁଡିକୁ ଚୟନ କରନ୍ତୁ।" #: tmp/GroupSelector.glade.h:2 msgid "_Deselect" msgstr "ନାପସନ୍ଦ କରନ୍ତୁ (_D)" #: tmp/GroupSelector.glade.h:3 msgid "_Deselect all optional packages" msgstr "ସମସ୍ତ ଇଚ୍ଛାଧୀନ ପ୍ଯାକେଜ ମାନଙ୍କୁ ନାପସନ୍ଦ କରନ୍ତୁ (_D)" #: tmp/GroupSelector.glade.h:4 msgid "_Optional packages" msgstr "ଇଚ୍ଛାଧୀନ ପ୍ୟାକେଜଗୁଡ଼ିକ (_O)" #: tmp/GroupSelector.glade.h:5 msgid "_Select" msgstr "ଚୟନ କରନ୍ତୁ (_S)" #: tmp/GroupSelector.glade.h:6 msgid "_Select all optional packages" msgstr "ସମସ୍ତ ଇଚ୍ଛାଧୀନ ପ୍ୟାକେଜଗୁଡ଼ିକୁ ଚୟନ କରନ୍ତୁ (_S)" #: tmp/GroupSelector.glade.h:7 msgid "dialog1" msgstr "ସଂଳାପ1" #: tmp/account.glade.h:2 msgid "Root Password:" msgstr "ପ୍ରମୂଖ ଚାଳକର ପ୍ରବେଶ ସଙ୍କେତ:" #: tmp/account.glade.h:3 msgid "" "The root account is used for administering the system. Enter a password for " "the root user." msgstr "" "ଏହି ତନ୍ତ୍ରର ପ୍ରଶାସନିକ କାର୍ଯ୍ଯ ପାଇଁ ପ୍ରମୂଖ ଚାଳକ (ରୁଟ) ର ସୂଚନାକୁ ବ୍ଯବହାର କରାଯାଇଥାଏ। ପ୍ରମୂଖ " "ଚାଳକ ପାଇଁ ଗୋଟିଏ ପ୍ରବେଶ ସଙ୍କେତ ଭରଣ କରନ୍ତୁ" #: tmp/adddrive.glade.h:1 msgid "Add _ZFCP LUN" msgstr "_ZFCP LUN କୁ ଯୋଗ କରନ୍ତୁ" #: tmp/adddrive.glade.h:2 msgid "Add _iSCSI target" msgstr "_iSCSI ଲକ୍ଷ୍ଯକୁ ଯୋଗ କରନ୍ତୁ" #: tmp/adddrive.glade.h:4 msgid "Disable _dmraid device" msgstr "_dmraid ଉପକରଣକୁ ନିଷ୍କ୍ରିୟ କରନ୍ତୁ" #: tmp/adddrive.glade.h:6 msgid "_Add drive" msgstr "ଡ୍ରାଇଭ ଯୋଗ କରନ୍ତୁ (_A)" #: tmp/addrepo.glade.h:1 msgid "Repository _name:" msgstr "ସଂଗ୍ରହାଳୟ ନାମ (_n):" #: tmp/addrepo.glade.h:2 msgid "Repository _type:" msgstr "ସଂଗ୍ରହାଳୟ ପ୍ରକାର (_t):" #: tmp/addrepo.glade.h:4 msgid "Configure _proxy" msgstr "ଛାୟାକୁ ବିନ୍ଯାସ କରନ୍ତୁ (_p)" #: tmp/addrepo.glade.h:5 msgid "" "HTTP/FTP\n" "CD/DVD\n" "NFS\n" "Hard Drive" msgstr "" "HTTP/FTP\n" "CD/DVD\n" "NFS\n" "ହାର୍ଡ ଡ୍ରାଇଭ" #: tmp/addrepo.glade.h:9 msgid "Please provide the configuration information for this software repository." msgstr "ଏହି ସଫ୍ଟୱେର ସଂଗ୍ରହାଳୟ ପାଇଁ ଦୟାକରି ବିନ୍ୟାସ ସୂଚନା ପ୍ରଦାନକରନ୍ତୁ." #: tmp/addrepo.glade.h:10 msgid "Proxy U_RL" msgstr "ଛାୟା URL (_R)" #: tmp/addrepo.glade.h:11 msgid "Proxy pass_word" msgstr "ଛାୟା ପ୍ରବେଶ ସଙ୍କେତ (_w)" #: tmp/addrepo.glade.h:12 msgid "Proxy u_sername" msgstr "ଛାୟା ଚାଳକ ନାମ (_s)" #: tmp/addrepo.glade.h:13 msgid "Repository _URL" msgstr "ସଂଗ୍ରହାଳୟ URL (_U)" #: tmp/addrepo.glade.h:14 msgid "Select A Directory" msgstr "ଗୋଟିଏ ଡିରେକ୍ଟୋରୀ ଚୟନ କରନ୍ତୁ" #: tmp/addrepo.glade.h:15 msgid "URL is a _mirror list" msgstr "URL ଗୋଟିଏ ପ୍ରତିଛବି ତାଲିକା ଅଟେ" #: tmp/addrepo.glade.h:16 msgid "_Directory" msgstr "ଡିରେକ୍ଟୋରି (_D)" #: tmp/addrepo.glade.h:17 msgid "_Options" msgstr "ବିକଳ୍ପଗୁଡ଼ିକ (_O)" #: tmp/addrepo.glade.h:18 msgid "_Partition" msgstr "ବିଭାଜନ (_P)" #: tmp/addrepo.glade.h:19 msgid "_Path" msgstr "ପଥ (_P)" #: tmp/addrepo.glade.h:20 msgid "_Server" msgstr "ସର୍ଭର (_S)" #: tmp/anaconda.glade.h:1 msgid "Reboo_t" msgstr "ପୁନର୍ଚାଳନ କରନ୍ତୁ (_t)" #: tmp/anaconda.glade.h:3 msgid "_Next" msgstr "ଆଗକୁ (_N)" #: tmp/autopart.glade.h:1 msgid "Resize _target:" msgstr "ଲକ୍ଷ ସ୍ଥାନର ଆକାର ବଦଳାନ୍ତୁ (_t):" #: tmp/autopart.glade.h:2 msgid "" "Installation requires partitioning of your hard drive. By default, a " "partitioning layout is chosen which is reasonable for most users. You can " "either choose to use this or create your own." msgstr "" "ସ୍ଥାପନ ପ୍ରକ୍ରିୟା ପାଇଁ ଆପଣଙ୍କ ତନ୍ତ୍ରର ବିଭାଜନ ଆବଶ୍ୟକ। ପୂର୍ବନିର୍ଦ୍ଧାରିତ ଭାବରେ ଅଧିକାଂଶ ଚାଳକ " "ମାନଙ୍କ ପାଇଁ ଉଚିତ ବିଭାଜନ ବିନ୍ଯାସକୁ ଚୟନ କରନ୍ତୁ। ଆପଣ ଏହାକୁ ଚୟନ କରିବା ପାଇଁ ବାଛି ପାରନ୍ତି କିମ୍ବା " "ଆପଣଙ୍କ ନିଜସ୍ବ ବିଭାଜନ ସୃଷ୍ଟି କରିପାରନ୍ତି।" #: tmp/autopart.glade.h:3 msgid "Re_view and modify partitioning layout" msgstr "ବିଭାଜନକାରୀ ବିନ୍ଯାସ କୁ ସମୀକ୍ଷା ଏବଂ ରୂପାନ୍ତରିତ କରନ୍ତୁ (_v)" #: tmp/autopart.glade.h:4 msgid "What drive would you like to _boot this installation from?" msgstr "କେଉଁ ଡ୍ରାଇଭରୁ ଆପଣ ଏହି ସ୍ଥାପନ ପ୍ରକ୍ରିୟାକୁ ବୁଟ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି (_b)?" #: tmp/autopart.glade.h:5 msgid "Which Partition to resize" msgstr "କେଉଁ ବିଭାଜନର ଆକାର ବଦଳାଯିବ" #: tmp/autopart.glade.h:6 msgid "Which partition would you like to resize to make room for your installation?" msgstr "ଆପଣଙ୍କର ସ୍ଥାପନ ପାଇଁ ସ୍ଥାନ ନିରୁପଣ କରିବାକୁ କେଉଁ ବିଭାଜନର ଆକାର ବଦଳାଇବାକୁ ଚାହୁଁଛନ୍ତି?" #: tmp/autopart.glade.h:7 msgid "_Advanced storage configuration" msgstr "ଉନ୍ନତ ଭଣ୍ଡାର ବିନ୍ଯାସ (_A)" #: tmp/autopart.glade.h:8 msgid "_Encrypt system" msgstr "ତନ୍ତ୍ରକୁ ସଂଗୁପ୍ତ କରନ୍ତୁ (_E)" #: tmp/autopart.glade.h:10 msgid "_Select the drive(s) to use for this installation." msgstr "ଏହି ସ୍ଥାପନରେ ବ୍ଯବହାର୍ଯ୍ଯ ଡ୍ରାଇଭକୁ(ମାନଙ୍କୁ) ଚୟନ କରନ୍ତୁ (_S)।" #: tmp/blwhere.glade.h:1 msgid "/boot" msgstr "/boot" #: tmp/blwhere.glade.h:2 msgid "BIOS Drive Order" msgstr "BIOS ଡ୍ରାଇଭର କ୍ରମ" #: tmp/blwhere.glade.h:3 msgid "Boot loader device" msgstr "ବୁଟ-ଲୋଡର ଉପକରଣ" #: tmp/blwhere.glade.h:4 msgid "First BIOS drive:" msgstr "ପ୍ରଥମ BIOS ଡ୍ରାଇଭ:" #: tmp/blwhere.glade.h:5 msgid "Fourth BIOS drive:" msgstr "ଚତୁର୍ଥ BIOS ଡ୍ରାଇଭ:" #: tmp/blwhere.glade.h:6 msgid "MBR" msgstr "MBR" #: tmp/blwhere.glade.h:7 msgid "Second BIOS drive:" msgstr "ଦ୍ୱିତୀୟ BIOS ଡ୍ରାଇଭ:" #: tmp/blwhere.glade.h:8 msgid "Third BIOS drive:" msgstr "ତୃତୀୟ BIOS ଡ୍ରାଇଭ:" #: tmp/blwhere.glade.h:9 msgid "Where would you like to install the boot loader for your system?" msgstr "ଆପଣଙ୍କର ତନ୍ତ୍ର ପାଇଁ ଆପଣ କେଉଁଠାରେ ବୁଟ-ଲୋଡର କୁ ସ୍ଥାପିତ କରିବା ପାଇଁ ଚାହୁଁଛନ୍ତି?" #: tmp/detailed-dialog.glade.h:1 msgid "Info" msgstr "ସୂଚନା" #: tmp/detailed-dialog.glade.h:2 msgid "_Details" msgstr "ବିସ୍ତୃତ ବିବରଣୀ (_D)" #: tmp/exnSave.glade.h:1 msgid "Bug _description" msgstr "ତ୍ରୁଟି ବର୍ଣ୍ଣନା (_d)" #: tmp/exnSave.glade.h:2 msgid "Destination _file" msgstr "ଲକ୍ଷ୍ୟ ସ୍ଥଳ ଫାଇଲ (_f)" #: tmp/exnSave.glade.h:3 msgid "" "Local storage device\n" "Local disk\n" "Remote server (scp)" msgstr "" "ସ୍ଥାନୀୟ ସଂରକ୍ଷଣ ଉପକରଣ\n" "ସ୍ଥାନୀୟ ଡିସ୍କ\n" "ସୁଦୂର ସର୍ଭର (scp)" #: tmp/exnSave.glade.h:6 msgid "Please choose a destination for saving your traceback." msgstr "ଆପଣଙ୍କର ପଛଖୋଜାକୁ ସଂରକ୍ଷଣ କରିବା ପାଇଁ ଦୟାକରି ଗୋଟିଏ ଲକ୍ଷ୍ଯସ୍ଥଳ ଚୟନକରନ୍ତୁ" #: tmp/exnSave.glade.h:8 msgid "Select A File" msgstr "ଗୋଟିଏ ଫାଇଲ ଚୟନ କରନ୍ତୁ" #: tmp/exnSave.glade.h:9 msgid "_Host (host:port)" msgstr "ଆଧାର (ଆଧାର:ସଂଯୋଗିକୀ) (_H)" #: tmp/exnSave.glade.h:10 msgid "_Password" msgstr "ପ୍ରବେଶ ସଂକେତ (_P):" #: tmp/exnSave.glade.h:11 msgid "_User name" msgstr "ଚାଳକ ନାମ (_U)" #: tmp/instkey.glade.h:2 #, no-c-format msgid "%(instkey)s:" msgstr "%(instkey)s:" #: tmp/instkey.glade.h:4 #, no-c-format msgid "Please enter your %(instkey)s." msgstr "ଦୟାକରି ଆପଣଙ୍କ %(instkey)s କୁ ଭରଣ କରନ୍ତୁ।" #: tmp/iscsi-config.glade.h:1 msgid "CHAP _Password:" msgstr "CHAP ପ୍ରବେଶ ସଙ୍କେତ (_P):" #: tmp/iscsi-config.glade.h:2 msgid "CHAP _Username:" msgstr "CHAP ଚାଳକ ନାମ (_U):" #: tmp/iscsi-config.glade.h:3 msgid "Reverse CHAP P_assword:" msgstr "ଓଲଟା CHAP ପ୍ରବେଶ ସଙ୍କେତ (_a):" #: tmp/iscsi-config.glade.h:4 msgid "Reverse CHAP U_sername:" msgstr "ଓଲଟା CHAP ଚାଳକ ନାମ (_s):" #: tmp/iscsi-config.glade.h:5 msgid "_Target IP Address:" msgstr "ଲକ୍ଷସ୍ଥ ଆଇ.ପି. ଠିକଣା (_T):" #: tmp/iscsi-config.glade.h:6 msgid "iSCSI Initiator _Name:" msgstr "iSCSI ପ୍ରାରମ୍ଭକଙ୍କ ନାମ (_N):" #: tmp/iscsi-config.glade.h:9 msgid "_Add target" msgstr "ଲକ୍ଷ୍ଯ ଯୋଗ କରନ୍ତୁ (_A)" #: tmp/liveinst.desktop.in.h:1 msgid "Install" msgstr "ସ୍ଥାପନ କରନ୍ତୁ" #: tmp/liveinst.desktop.in.h:2 msgid "Install the live CD to your hard disk" msgstr "ଆପଣଙ୍କ ହାର୍ଡ ଡିସ୍କରେ ପ୍ରତ୍ଯେକ୍ଷ ସି.ଡି.କୁ ସ୍ଥାପନ କରନ୍ତୁ" #: tmp/liveinst.desktop.in.h:3 msgid "Install to Hard Drive" msgstr "ହାର୍ଡ ଡ୍ରାଇଭରେ ସ୍ଥାପନ କରନ୍ତୁ" #: tmp/lukspassphrase.glade.h:1 msgid "" "Also add this passphrase to all existing encrypted devices to streamline the " "boot process" msgstr "" "ବୁଟ ପ୍ରଣାଳୀକୁ ସରଳ କରିବା ପାଇଁ ସମସ୍ତ ସ୍ଥିତବାନ ସଂଗୁପ୍ତ ଉପକରଣଗୁଡ଼ିକ ପାଇଁ ଏହି " "ପ୍ରବେଶ ସଂକେତକୁ ଯୋଗକରନ୍ତୁ" #: tmp/lukspassphrase.glade.h:2 msgid "" "Choose a passphrase for this encrypted partition. You will be prompted for " "the passphrase during system boot." msgstr "" "ଏହି ସଂଗୁପ୍ତ ବିଭାଜନ ପାଇଁ ଗୋଟିଏ ପ୍ରବେଶ ସଂକେତ ଚୟନ କରନ୍ତୁ। ତନ୍ତ୍ର ବୁଟ ସମୟରେ ଆପଣଙ୍କୁ ସେହି ପ୍ରବେଶ " "ସଂକେତ ପଚରାଯିବ।" #: tmp/lukspassphrase.glade.h:3 msgid "Confirm passphrase:" msgstr "ପ୍ରବେଶ ସଙ୍କେତକୁ ନିଶ୍ଚିତ କରନ୍ତୁ:" #: tmp/lukspassphrase.glade.h:4 msgid "Enter passphrase for encrypted partition" msgstr "ସଂଗୁପ୍ତ ବିଭାଜନ ପାଇଁ ପ୍ରବେଶ ସଙ୍କେତ ଭରଣ କରନ୍ତୁ" #: tmp/lukspassphrase.glade.h:5 msgid "Enter passphrase:" msgstr "ପ୍ରବେଶ ସଙ୍କେତ ଭରଣ କରନ୍ତୁ:" #: tmp/netconfig.glade.h:2 msgid "Gateway:" msgstr "ଗେଟ-ୱେ:" #: tmp/netconfig.glade.h:3 msgid "IPv4 Address:" msgstr "IPv4 ଠିକଣା:" #: tmp/netconfig.glade.h:4 msgid "IPv6 Address:" msgstr "IPv6 ଠିକଣା:" #: tmp/netconfig.glade.h:5 msgid "Nameserver:" msgstr "ନାମ ସେବକ:" #: tmp/netconfig.glade.h:6 msgid "_Interface:" msgstr "ଅନ୍ତରାପୃଷ୍ଠ (_I):" #: tmp/netconfig.glade.h:7 msgid "Enable IPv_4 support" msgstr "IPv_4 ସହାୟତାକୁ ସକ୍ରିୟ କରନ୍ତୁ" #: tmp/netconfig.glade.h:8 msgid "Enable IPv_6 support" msgstr "IPv_6 ସହାୟତାକୁ ସକ୍ରିୟ କରନ୍ତୁ" #: tmp/netconfig.glade.h:11 msgid "Use _dynamic IP configuration (DHCP)" msgstr "ଗତିଶୀଳ ଆଇ.ପି. ବିନ୍ଯାସ (DHCP) କୁ ବ୍ଯବହାର କରନ୍ତୁ" #: tmp/network.glade.h:1 msgid "Hostname:" msgstr "ଆଧାର ନାମ:" #: tmp/network.glade.h:2 msgid "" "Please name this computer. The hostname identifies the computer on a " "network." msgstr "ଦୟାକରି ଏହି କମ୍ପୁଟରର ନାମକରଣ କରନ୍ତୁ. ଆଧାରନାମ ଏହି କମ୍ପୁଟରକୁ ନେଟୱର୍କରେ ଚିହ୍ନିପାରେ." #: tmp/tasksel.glade.h:1 msgid "Customize _later" msgstr "ପରେ ଇଚ୍ଛାରୂପଣ କରିବେ (_l)" #: tmp/tasksel.glade.h:2 msgid "" "Please select any additional repositories that you want to use for software " "installation." msgstr "ଦୟାକରି ସଫଟୱେର ସ୍ଥାପନରେ ବ୍ଯବହାର କରିବା ପାଇଁ ଚାହୁଁଥିବା ଯେ କୌଣସି ଅତିରିକ୍ତ ଭଣ୍ଡାରକୁ ଚୟନ କରନ୍ତୁ।" #: tmp/tasksel.glade.h:5 msgid "" "You can further customize the software selection now, or after install via " "the software management application." msgstr "" "ଅଧିକନ୍ତୁ ଆପଣ ବର୍ତ୍ତମାନ ସଫଟୱେର ଚୟନକୁ ଇଚ୍ଛାରୂପଣ କରିପାରିବେ, କିମ୍ବା ସ୍ଥାପନ ପରେ ସଫଟୱେର ପରିଚାଳନା " "ପ୍ରୟୋଗ ଦ୍ବାରା ସମ୍ପନ୍ନ କରିପାରିବେ।" #: tmp/tasksel.glade.h:6 msgid "_Add additional software repositories" msgstr "ଅତିରିକ୍ତ ସଫ୍ଟୱେର ସଂଗ୍ରହାଳୟକୁ ଯୋଗ କରନ୍ତୁ (_A)" #: tmp/tasksel.glade.h:7 msgid "_Customize now" msgstr "ବର୍ତମାନ ଇଚ୍ଛାରୂପଣ କରନ୍ତୁ (_C)" #: tmp/tasksel.glade.h:8 msgid "_Modify repository" msgstr "ସଂଗ୍ରହାଳୟକୁ ପରିବର୍ତ୍ତନ କରନ୍ତୁ (_M)" #: tmp/zfcp-config.glade.h:1 msgid "Device number:" msgstr "ଉପକରଣ ସଂଖ୍ଯା:" #: tmp/zfcp-config.glade.h:2 msgid "FCP LUN:" msgstr "FCP LUN:" #: tmp/zfcp-config.glade.h:3 msgid "WWPN:" msgstr "WWPN:" #: tmp/zfcp-config.glade.h:4 msgid "Add FCP device" msgstr "FCP ଉପକରଣକୁ ଯୋଗ କରନ୍ତୁ" #. generated from lang-table msgid "Afrikaans" msgstr "ଆଫ୍ରିକାନ" #. generated from lang-table msgid "Arabic" msgstr "ଆରବୀ" #. generated from lang-table msgid "Assamese" msgstr "ଆସାମୀ" #. generated from lang-table msgid "Bengali" msgstr "ବଙ୍ଗାଳୀ" #. generated from lang-table msgid "Bengali(India)" msgstr "ବଙ୍ଗାଳୀ (ଭାରତ)" #. generated from lang-table msgid "Bulgarian" msgstr "ବୁଲଗେରିୟାନ" #. generated from lang-table msgid "Catalan" msgstr "କାଟାଲାନ" #. generated from lang-table msgid "Chinese(Simplified)" msgstr "ଚାଇନିଜ (ସରଳୀକ୍ରୁତ))" #. generated from lang-table msgid "Chinese(Traditional)" msgstr "ଚାଇନିଜ (ପାରମ୍ପରିକ)" #. generated from lang-table msgid "Croatian" msgstr "କ୍ରୋଏଶିୟାନ" #. generated from lang-table msgid "Czech" msgstr "ଚେକ" #. generated from lang-table msgid "Danish" msgstr "ଡାନିଶ" #. generated from lang-table msgid "Dutch" msgstr "ଡୁଚ" #. generated from lang-table msgid "English" msgstr "ଇଂରାଜୀ" #. generated from lang-table msgid "Estonian" msgstr "ଇଷ୍ଟୋନିୟାନ" #. generated from lang-table msgid "Finnish" msgstr "ଫିନିଶ" #. generated from lang-table msgid "French" msgstr "ଫରାସୀ" #. generated from lang-table msgid "German" msgstr "ଜର୍ମାନ" #. generated from lang-table msgid "Greek" msgstr "ଗ୍ରୀକ" #. generated from lang-table msgid "Gujarati" msgstr "ଗୁଜୁରାଟୀ" #. generated from lang-table msgid "Hebrew" msgstr "ହର୍ବ୍ୟୁ" #. generated from lang-table msgid "Hindi" msgstr "ହିନ୍ଦୀ" #. generated from lang-table msgid "Hungarian" msgstr "ହଙ୍ଗାରିୟାନ" #. generated from lang-table msgid "Icelandic" msgstr "ଆଇସଲ୍ଯାଣ୍ଡିକ" #. generated from lang-table msgid "Iloko" msgstr "ଇଲୋକୋ" #. generated from lang-table msgid "Indonesian" msgstr "ଇଣ୍ଡୋନେଶିୟାନ" #. generated from lang-table msgid "Italian" msgstr "ଇଟାଲୀୟାନ" #. generated from lang-table msgid "Japanese" msgstr "ଜାପାନୀ" #. generated from lang-table msgid "Kannada" msgstr "କନ୍ନଡ" #. generated from lang-table msgid "Korean" msgstr "କୋରିୟାନ" #. generated from lang-table msgid "Macedonian" msgstr "ମେସୀଡୋନିୟାନ" #. generated from lang-table msgid "Malay" msgstr "ମାଳୟ" #. generated from lang-table msgid "Malayalam" msgstr "ମଲୟାଲମ" #. generated from lang-table msgid "Marathi" msgstr "ମରାଠୀ" #. generated from lang-table msgid "Norwegian(Bokmål)" msgstr "ନୋରୱେଜିୟାନ(ବକମଲ)" #. generated from lang-table msgid "Northern Sotho" msgstr "ଉତ୍ତରୀ ଶୋଥୋ" #. generated from lang-table msgid "Oriya" msgstr "ଓଡିଆ" #. generated from lang-table msgid "Persian" msgstr "ପାର୍ସି" #. generated from lang-table msgid "Polish" msgstr "ପୋଲିଶ" #. generated from lang-table msgid "Portuguese" msgstr "ପର୍ତୁଗୀଜ" #. generated from lang-table msgid "Portuguese(Brazilian)" msgstr "ପର୍ତୁଗୀଜ (ବ୍ରାଜିଲୀୟାନ)" #. generated from lang-table msgid "Punjabi" msgstr "ପଞ୍ଜାବୀ" #. generated from lang-table msgid "Romanian" msgstr "ରୋମାନୀୟାନ" #. generated from lang-table msgid "Russian" msgstr "ରୁଷି" #. generated from lang-table msgid "Serbian" msgstr "ସର୍ବିୟାନ" #. generated from lang-table msgid "Serbian(Latin)" msgstr "ସର୍ବିୟାନ (ଲାଟିନ)" #. generated from lang-table msgid "Sinhala" msgstr "ସିଙ୍ଘାଳୀ" #. generated from lang-table msgid "Slovak" msgstr "ସ୍ଲୋଭାକ" #. generated from lang-table msgid "Slovenian" msgstr "ସ୍ଲୋଭେନିୟାନ" #. generated from lang-table msgid "Spanish" msgstr "ସ୍ପାନିଶ" #. generated from lang-table msgid "Swedish" msgstr "ସ୍ବୀଡିଶ" #. generated from lang-table msgid "Tamil" msgstr "ତାମିଲ" #. generated from lang-table msgid "Telugu" msgstr "ତେଲୁଗୁ" #. generated from lang-table msgid "Turkish" msgstr "ତୁର୍କିଶ" #. generated from lang-table msgid "Ukrainian" msgstr "ୟୁକ୍ରେନିୟନ" #. generated from lang-table msgid "Vietnamese" msgstr "ଭିୟେତନାମୀ" #. generated from lang-table msgid "Welsh" msgstr "ୱେଲଶ୍" #. generated from lang-table msgid "Zulu" msgstr "ଜୁଲୁ"