#: ../gettext_rh.py:340
msgid ""
msgstr ""
"Project-Id-Version: install 7.1\n"
"POT-Creation-Date: 2002-07-09 10:57-0400\n"
"PO-Revision-Date: 2002-04-16 12:17-0400\n"
"Last-Translator: Trond Eivind Glomsrød <teg@redhat.com>\n"
"Language-Team: Norwegian <no@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=ISO-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Emacs 21.1\n"

#: ../anaconda:342
msgid ""
"You do not have enough RAM to use the graphical installer.  Starting text "
"mode."
msgstr ""
"Du har ikke nok RAM til å bruke grafisk installasjon på denne maskinen. "
"Starter tekstmodus."

#: ../anaconda:357 ../gui.py:102 ../rescue.py:36 ../rescue.py:143
#: ../rescue.py:166 ../rescue.py:176 ../rescue.py:192 ../rescue.py:198
#: ../text.py:314 ../text.py:438 ../xserver.py:53 ../textw/complete_text.py:54
#: ../textw/confirm_text.py:24 ../textw/confirm_text.py:36
#: ../textw/constants_text.py:36 ../textw/fdasd_text.py:32
#: ../textw/fdisk_text.py:41 ../textw/network_text.py:154
#: ../textw/silo_text.py:110 ../textw/silo_text.py:147
#: ../textw/silo_text.py:160 ../loader/cdrom.c:33 ../loader/devices.c:94
#: ../loader/devices.c:239 ../loader/devices.c:258 ../loader/devices.c:265
#: ../loader/devices.c:334 ../loader/devices.c:429 ../loader/kickstart.c:59
#: ../loader/kickstart.c:69 ../loader/kickstart.c:108 ../loader/lang.c:28
#: ../loader/lang.c:96 ../loader/lang.c:308 ../loader/lang.c:634
#: ../loader/loader.c:330 ../loader/loader.c:471 ../loader/loader.c:488
#: ../loader/loader.c:594 ../loader/loader.c:893 ../loader/loader.c:1094
#: ../loader/loader.c:1157 ../loader/loader.c:1254 ../loader/loader.c:1255
#: ../loader/loader.c:1294 ../loader/loader.c:1297 ../loader/loader.c:1368
#: ../loader/loader.c:1369 ../loader/loader.c:1465 ../loader/loader.c:1578
#: ../loader/loader.c:1583 ../loader/loader.c:1625 ../loader/loader.c:1664
#: ../loader/loader.c:1726 ../loader/loader.c:1974 ../loader/loader.c:2771
#: ../loader/loader.c:2801 ../loader/loader.c:2864 ../loader/loader.c:2879
#: ../loader/loader.c:3102 ../loader/loader.c:3134 ../loader/mediacheck.c:192
#: ../loader/mediacheck.c:248 ../loader/mediacheck.c:280
#: ../loader/modules.c:389 ../loader/modules.c:409 ../loader/modules.c:442
#: ../loader/net.c:186 ../loader/net.c:269 ../loader/net.c:355
#: ../loader/net.c:730 ../loader/net.c:763 ../loader/pcmcia.c:104
#: ../loader/pcmcia.c:114 ../loader/pcmcia.c:131 ../loader/telnetd.c:68
#: ../loader/urls.c:81 ../loader/urls.c:91 ../loader/urls.c:99
#: ../loader/urls.c:198 ../loader/urls.c:268 ../loader/urls.c:273
#: ../loader/urls.c:279 ../loader/urls.c:419
msgid "OK"
msgstr "OK"

#: ../anaconda:402
msgid "Probing for video card:   "
msgstr "Søker etter skjermkort:   "

#: ../anaconda:410
msgid "Unable to probe\n"
msgstr "Kunne ikke søke\n"

#: ../anaconda:412
msgid "Probing for monitor type: "
msgstr "Søker etter skjermtype: "

#: ../anaconda:423
msgid "Probing for mouse type:   "
msgstr "Søker etter mustype:   "

#: ../anaconda:427
msgid "Skipping mouse probe.\n"
msgstr "Hopper over søk etter mus.\n"

#: ../anaconda:434
#, c-format
msgid ""
"Graphical installation not available for %s installs.  Starting text mode."
msgstr ""
"Grafisk installasjon er ikke tilgjengelig for %s-installasjoner. Starter "
"tekstmodus."

#: ../anaconda:446
msgid ""
"No mouse was detected.  A mouse is required for graphical installation.  "
"Starting text mode."
msgstr ""
"Ingen mus funnet. Grafisk installasjon krever at du har en mus. Starter "
"tekstmodus."

#: ../anaconda:451
msgid "Using mouse type: "
msgstr "Bruker mustype: "

#: ../anaconda:455
msgid "DISPLAY variable not set. Starting text mode!"
msgstr ""

#: ../autopart.py:723
msgid "Could not allocate cylinder-based partitions as primary partitions"
msgstr ""
"Kunne ikke allokere sylinder-baserte partisjoner som primære partisjoner"

#: ../autopart.py:726
msgid "Could not allocate partitions as primary partitions"
msgstr "Kunne ikke allokere partisjoner som primære partisjoner"

#: ../autopart.py:729
msgid "Could not allocate cylinder-based partitions"
msgstr "Kunne ikke allokere sylinder-baserte partisjoner"

#: ../autopart.py:732
msgid "Could not allocate partitions"
msgstr "Kunne ikke allokere partisjoner"

#: ../autopart.py:791
#, python-format
msgid ""
"Boot partition %s may not meet booting constraints for your architecture.  "
"Creation of a boot disk is highly encouraged."
msgstr ""
"Oppstartspartisjon %s møter muligens ikke oppstartsbegrensningene for din "
"arkitektur. Det er sterkt anbefalt å opprette en oppstartsdiskett."

#: ../autopart.py:808
#, python-format
msgid ""
"Adding this partition would not leave enough disk space for already "
"allocated logical volumes in %s."
msgstr ""

#: ../autopart.py:952
msgid "Requested Partition Does Not Exist"
msgstr "Forespurt partisjon eksisterer ikke"

#: ../autopart.py:953
#, python-format
msgid ""
"Unable to locate partition %s to use for %s.\n"
"\n"
"Press OK to reboot your system."
msgstr ""
"Kan ikke finne partisjon %s som skal brukes til %s.\n"
"\n"
"Trykk OK for å starte systemet på nytt."

#: ../autopart.py:983 ../autopart.py:1022
msgid "Partition Request Sanity Check Errors"
msgstr "Feil under sjekk av partisjonsforespørsel"

#: ../autopart.py:984
#, python-format
msgid ""
"The following errors occurred with your partitioning:\n"
"\n"
"%s\n"
"\n"
"Press OK to reboot your system."
msgstr ""
"Følgende feil oppsto under partisjonering:\n"
"\n"
"%s\n"
"\n"
"Trykk OK for å starte systemet på nytt."

#: ../autopart.py:993
msgid "Warnings During Automatic Partitioning"
msgstr "Advarsler under automatisk partisjonering"

#: ../autopart.py:994
#, python-format
msgid ""
"Following warnings occurred during automatic partitioning:\n"
"\n"
"%s"
msgstr ""
"Følgende advarsler ble gitt under automatisk partisjonering:\n"
"\n"
"%s"

#: ../autopart.py:1006
msgid ""
"\n"
"\n"
"Press OK to reboot your system."
msgstr ""

#: ../autopart.py:1007 ../iw/partition_gui.py:939
#: ../textw/partition_text.py:198
msgid "Error Partitioning"
msgstr "Feil under partisjonering"

#: ../autopart.py:1008
#, python-format
msgid ""
"Could not allocate requested partitions: \n"
"\n"
"%s.%s"
msgstr ""
"Kunne ikke allokere forespurte partisjoner: \n"
"\n"
"%s.%s"

#: ../autopart.py:1023
#, python-format
msgid ""
"The following errors occurred with your partitioning:\n"
"\n"
"%s\n"
"\n"
"This can happen when there is not enough space on your disk drive(s) for "
"autopartitioning to succeed.  You may need to manually partition your drives "
"to complete the install.\n"
"\n"
"Press OK to continue."
msgstr ""

#: ../autopart.py:1100 ../bootloader.py:123 ../image.py:217
#: ../partedUtils.py:240 ../partedUtils.py:658 ../upgrade.py:259
#: ../upgrade.py:385 ../upgrade.py:404 ../iw/blpasswidget.py:152
#: ../iw/bootloader_advanced_gui.py:42 ../iw/bootloader_main_gui.py:88
#: ../iw/bootloader_old.py:51 ../iw/upgrade_swap_gui.py:201
#: ../iw/upgrade_swap_gui.py:209 ../iw/upgrade_swap_gui.py:216
#: ../textw/bootloader_text.py:134 ../textw/bootloader_text.py:449
#: ../textw/fdasd_text.py:84 ../textw/partition_text.py:202
#: ../textw/upgrade_text.py:175 ../loader/loader.c:3529
msgid "Warning"
msgstr "Advarsel"

#: ../autopart.py:1106
msgid ""
"Automatic Partitioning sets up your partitioning based on your installation "
"type. You also can customize the resulting partitions to meet your needs.\n"
"\n"
"The manual disk partitioning tool, Disk Druid, allows you to set up your "
"partitions in an interactive environment. You can set the filesystem types, "
"mount points, size and more in this easy to use, powerful interface.\n"
"\n"
"fdisk is the traditional, text-based partitioning tool offered by Red Hat. "
"Although it is not as easy to use, there are cases where fdisk is preferred."
msgstr ""
"Automatisk partisjonering setter opp dine partisjoner basert på din "
"installasjonstype. Du kan også tilpasse de resulterende partisjonene for å "
"møte dine behov.\n"
"Verktøyet for manuell partisjonering, Disk Druid, lar deg sette opp dine "
"partisjoner i et interaktivt miljø. Du kan sette filsystemtyper, "
"monteringspunkter, størrelse og mer i dette lettbrukte, kraftige "
"grensesnittet.\n"
"\n"
"fdisk er det tradisjonelle, tekstbaserte partisjoneringsverktøyet som tilbys "
"av Red Hat. Selv om dette kan være noe vanskeligere i bruk, finnes det "
"tilfeller hvor fdisk er å foretrekke."

#: ../autopart.py:1122
msgid ""
"Before automatic partitioning can be set up by the installation program, you "
"must choose how to use the space on hard drives."
msgstr ""
"Før automatisk partisjonering utføres av installasjonsprogrammet må du velge "
"hvordan plassen på harddiskene skal brukes."

#: ../autopart.py:1127
msgid "Remove all partitions on this system"
msgstr "Fjern alle partisjoner på dette systemet"

#: ../autopart.py:1128
msgid "Remove all Linux Partitions on this system"
msgstr "Fjern alle Linux-partisjoner på dette systemet"

#: ../autopart.py:1129
msgid "Keep all partitions and use existing free space"
msgstr "Behold alle partisjoner og bruk eksisterende ledig plass"

#: ../autopart.py:1131
#, python-format
msgid ""
"WARNING!!\tWARNING!!\n"
"\n"
"You have selected to remove all partitions (ALL DATA) on the following "
"drives:%s\n"
"Are you sure you want to do this?"
msgstr ""
"ADVARSEL!!\tADVARSEL!!\n"
"\n"
"Du har valgt å fjerne alle partisjoner (ALLE DATA) på følgende stasjoner:%s\n"
"\n"
"Er du sikker på at du vil gjøre dette?"

#: ../autopart.py:1136
#, python-format
msgid ""
"WARNING!!\tWARNING!!\n"
"\n"
"You have selected to remove all Linux partitions (and ALL DATA on them) on "
"the following drives:%s\n"
"Are you sure you want to do this?"
msgstr ""
"ADVARSEL!!\tADVARSEL!!\n"
"\n"
"Du har valgt å fjerne alle Linux-partisjoner (og ALLE DATA på dem) på "
"følgende stasjoner:%s\n"
"Er du sikker på at du ønsker å gjøre dette?"

#: ../bootloader.py:89
msgid "Bootloader"
msgstr "Oppstartslaster"

#: ../bootloader.py:89
msgid "Installing bootloader..."
msgstr "Installerer blader..."

#: ../bootloader.py:124
msgid ""
"No kernel packages were installed on your system.  Your boot loader "
"configuration will not be changed."
msgstr ""
"Ingen kjerne-pakker ble installert på systemet. "
"Oppstartslasterkonfigurasjonen vil ikke bli endret."

#: ../comps.py:514
msgid "Everything"
msgstr "Alt"

#: ../comps.py:696 ../comps.py:762 ../upgrade.py:584
msgid "no suggestion"
msgstr "ingen forslag"

#: ../exception.py:167 ../text.py:235
msgid "Exception Occurred"
msgstr "Uventet hendelse oppstod"

#: ../exception.py:234
msgid "Dump Written"
msgstr "Dump skrevet"

#: ../exception.py:235
msgid ""
"Your system's state has been successfully written to the floppy. Your system "
"will now be reset."
msgstr ""
"Systemets tilstand ble skrevet til disketten. Systemet vil nå bli startet på "
"nytt."

#: ../floppy.py:59
#, fuzzy
msgid "Insert a floppy disk"
msgstr "Kunne ikke montere disketten."

#: ../floppy.py:60
#, fuzzy
msgid ""
"Please remove any diskettes from the floppy drive, and insert the floppy "
"diskette that is to contain the boot disk.\n"
"\n"
"All data will be ERASED during creation of the boot disk."
msgstr ""
"Oppstartsdisketten lar deg starte ditt %s system fra en diskett.\n"
"\n"
"Vennligst fjern alle disketter fra diskettstasjonen og sett inn en tom "
"diskett. Alle data vil bli SLETTET under oppretting av oppstartsdisketten."

#: ../floppy.py:64
#, fuzzy
msgid "_Cancel"
msgstr "Avbryt"

#: ../floppy.py:64
#, fuzzy
msgid "_Make boot disk"
msgstr "Lag oppstartsdiskett"

#: ../floppy.py:76 ../floppy.py:105 ../fsset.py:549 ../fsset.py:1010
#: ../fsset.py:1029 ../fsset.py:1076 ../fsset.py:1087 ../fsset.py:1123
#: ../fsset.py:1173 ../fsset.py:1216 ../harddrive.py:184 ../image.py:76
#: ../image.py:162 ../packages.py:279 ../partedUtils.py:451
#: ../partIntfHelpers.py:144 ../partIntfHelpers.py:326 ../upgrade.py:312
#: ../upgrade.py:330 ../iw/osbootwidget.py:216 ../iw/osbootwidget.py:225
#: ../iw/raid_dialog_gui.py:611 ../iw/raid_dialog_gui.py:650
#: ../textw/fdasd_text.py:73 ../textw/partition_text.py:1048
#: ../textw/partition_text.py:1059 ../textw/upgrade_text.py:163
#: ../textw/upgrade_text.py:170 ../textw/upgrade_text.py:193
#: ../loader/devices.c:258 ../loader/devices.c:265 ../loader/devices.c:429
#: ../loader/lang.c:28 ../loader/lang.c:96 ../loader/loader.c:471
#: ../loader/loader.c:488 ../loader/loader.c:594 ../loader/loader.c:893
#: ../loader/loader.c:1157 ../loader/loader.c:1255 ../loader/loader.c:1369
#: ../loader/loader.c:1578 ../loader/loader.c:1583 ../loader/loader.c:1625
#: ../loader/loader.c:1726 ../loader/loader.c:2771 ../loader/loader.c:2801
#: ../loader/loader.c:2879 ../loader/loader.c:3102 ../loader/loader.c:3134
#: ../loader/mediacheck.c:192 ../loader/mediacheck.c:248
#: ../loader/modules.c:389 ../loader/modules.c:409 ../loader/pcmcia.c:114
#: ../loader/pcmcia.c:131 ../loader/telnetd.c:68 ../loader/urls.c:81
#: ../loader/urls.c:91 ../loader/urls.c:99 ../loader/urls.c:268
#: ../loader/urls.c:273
msgid "Error"
msgstr "Feil"

#: ../floppy.py:77 ../floppy.py:106
#, fuzzy
msgid ""
"An error occurred while making the boot disk. Please make sure that there is "
"a floppy in the first floppy drive."
msgstr ""
"En feil oppstod under oppretting av oppstartsdisketten. Forsikre deg om at "
"det står en formatert diskett i diskettstasjonen."

#: ../floppy.py:92
msgid "Creating"
msgstr "Oppretter"

#: ../floppy.py:92
msgid "Creating boot disk..."
msgstr "Oppretter oppstartsdiskett..."

#: ../fsset.py:172
msgid "Checking for Bad Blocks"
msgstr "Leter etter dårlige blokker"

#: ../fsset.py:173
#, python-format
msgid "Checking for bad blocks on /dev/%s..."
msgstr "Leter etter dårlige blokker på /dev/%s..."

#: ../fsset.py:550
#, python-format
msgid ""
"An error occurred migrating %s to ext3.  It is possible to continue without "
"migrating this filesystem if desired.\n"
"\n"
"Would you like to continue without migrating %s?"
msgstr ""
"En feil oppstod under migrering av %s til ext3. Det er mulig å fortsette "
"uten å migrere filsystemet.\n"
"\n"
"Ønsker du å fortsette uten å migrere %s?"

#: ../fsset.py:943
#, fuzzy
msgid "RAID Device"
msgstr "RAID-enhet %s"

#: ../fsset.py:946 ../iw/silo_gui.py:184 ../textw/silo_text.py:76
msgid "First sector of boot partition"
msgstr "Første sektor på oppstartspartisjonen"

#: ../fsset.py:947 ../iw/silo_gui.py:181 ../textw/silo_text.py:75
msgid "Master Boot Record (MBR)"
msgstr "Master Boot Record (MBR)"

#: ../fsset.py:1011
#, python-format
msgid ""
"An error occurred trying to initialize swap on device %s.  This problem is "
"serious, and the install cannot continue.\n"
"\n"
"Press Enter to reboot your system."
msgstr ""
"En feil oppsto under forsøk på å initiere swap på enhet %s. Dette problemet "
"er alvorlig, og installasjonen kan ikke fortsette.\n"
"\n"
"Trykk <Enter> for å starte systemet på nytt."

#: ../fsset.py:1030
#, python-format
msgid ""
"Error enabling swap device %s: %s\n"
"\n"
"This most likely means this swap partition has not been initialized.\n"
"\n"
"Press OK to reboot your system."
msgstr ""
"Feil under aktivering av swap-enhet %s: %s\n"
"\n"
"Dette betyr sannsynligvis at swap-partisjonen ikke er initiert.\n"
"\n"
"Trykk OK for å starte systemet på nytt."

#: ../fsset.py:1077
#, python-format
msgid ""
"Bad blocks have been detected on device /dev/%s. We do not recommend you use "
"this device.\n"
"\n"
"Press Enter to reboot your system"
msgstr ""

#: ../fsset.py:1088
#, python-format
msgid ""
"An error occurred searching for bad blocks on %s.  This problem is serious, "
"and the install cannot continue.\n"
"\n"
"Press Enter to reboot your system."
msgstr ""
"En feil oppsto under søk etter dårlige blokker på %s. Dette problemet er "
"alvorlig, og installasjonen kan ikke fortsette.\n"
"\n"
"Trykk <Enter> for å starte systemet på nytt."

#: ../fsset.py:1124
#, python-format
msgid ""
"An error occurred trying to format %s.  This problem is serious, and the "
"install cannot continue.\n"
"\n"
"Press Enter to reboot your system."
msgstr ""
"En feil oppsto under formatering av %s. Dette problemet er alvorlig, og "
"installasjonen kan ikke fortsette.\n"
"\n"
"Trykk <Enter> for å starte systemet på nytt."

#: ../fsset.py:1174
#, python-format
msgid ""
"An error occurred trying to migrate %s.  This problem is serious, and the "
"install cannot continue.\n"
"\n"
"Press Enter to reboot your system."
msgstr ""
"En feil oppsto under migrering av %s. Dette problemet er alvorlig, og "
"installasjonen kan ikke fortsette.\n"
"\n"
"Trykk <Enter> for å starte systemet på nytt."

#: ../fsset.py:1194 ../fsset.py:1203
msgid "Invalid mount point"
msgstr "Ugyldig monteringspunkt"

#: ../fsset.py:1195
#, python-format
msgid ""
"An error occurred when trying to create %s.  Some element of this path is "
"not a directory. This is a fatal error and the install cannot continue.\n"
"\n"
"Press Enter to reboot your system."
msgstr ""
"En feil oppsto under opprettelse av %s. Et element i denne stien er ikke en "
"katalog. Dette problemet er så alvorlig at installasjonen ikke kan "
"fortsette.\n"
"\n"
"Trykk <Enter> for å starte systemet på nytt."

#: ../fsset.py:1204
#, python-format
msgid ""
"An error occurred when trying to create %s: %s.  This is a fatal error and "
"the install cannot continue.\n"
"\n"
"Press Enter to reboot your system."
msgstr ""
"En feil oppsto under opprettelse av %s: %s. Dette problemet er alvorlig, og "
"installasjonen kan ikke fortsette.\n"
"\n"
"Trykk <Enter> for å starte systemet på nytt."

#: ../fsset.py:1217
#, python-format
msgid ""
"Error mounting device %s as %s: %s\n"
"\n"
"This most likely means this partition has not been formatted.\n"
"\n"
"Press OK to reboot your system."
msgstr ""
"Feil under montering av enhet %s som %s: %s\n"
"\n"
"Dette betyr sannsynligvis at partisjonen ikke er formatert.\n"
"\n"
"Trykk OK for å starte systemet på nytt."

#: ../fsset.py:1960
msgid "Formatting"
msgstr "Formaterer"

#: ../fsset.py:1961
#, python-format
msgid "Formatting %s filesystem..."
msgstr "Formaterer %s-filsystem..."

#: ../gui.py:99 ../text.py:311
msgid "Fix"
msgstr "Fiks"

#: ../gui.py:100 ../text.py:312 ../textw/bootdisk_text.py:22
#: ../textw/bootloader_text.py:78 ../textw/constants_text.py:48
#: ../textw/upgrade_text.py:255 ../loader/devices.c:232
#: ../loader/loader.c:1024 ../loader/loader.c:3529 ../loader/net.c:901
msgid "Yes"
msgstr "Ja"

#: ../gui.py:101 ../text.py:313 ../textw/bootdisk_text.py:22
#: ../textw/bootdisk_text.py:35 ../textw/bootloader_text.py:78
#: ../textw/constants_text.py:52 ../textw/upgrade_text.py:255
#: ../textw/upgrade_text.py:262 ../loader/devices.c:233
#: ../loader/loader.c:3529 ../loader/net.c:901
msgid "No"
msgstr "Nei"

#: ../gui.py:103 ../text.py:315 ../loader/net.c:274 ../loader/net.c:400
msgid "Retry"
msgstr "Prøv igjen"

#: ../gui.py:104 ../text.py:316
msgid "Ignore"
msgstr "Ignorer"

#: ../gui.py:105 ../gui.py:368 ../partIntfHelpers.py:226
#: ../partIntfHelpers.py:410 ../partIntfHelpers.py:521
#: ../partIntfHelpers.py:532 ../text.py:115 ../text.py:116 ../text.py:281
#: ../text.py:283 ../text.py:317 ../iw/bootloader_advanced_gui.py:50
#: ../iw/bootloader_main_gui.py:100 ../textw/bootloader_text.py:210
#: ../textw/constants_text.py:40 ../textw/silo_text.py:147
#: ../textw/silo_text.py:165 ../textw/userauth_text.py:76
#: ../loader/devices.c:240 ../loader/loader.c:2864 ../loader/modules.c:442
#: ../loader/pcmcia.c:104
msgid "Cancel"
msgstr "Avbryt"

#: ../gui.py:290 ../text.py:289
msgid ""
"An unhandled exception has occurred.  This is most likely a bug.  Please copy "
"the full text of this exception or save the crash dump to a floppy then file "
"a detailed bug report against anaconda at http://bugzilla.redhat.com/"
"bugzilla/"
msgstr ""
"Et uhåndtert unntak har oppstått. Dette er mest sannsynlig en feil. Kopier "
"hele teksten fra unntaksmeldingen og lagre informasjon om krasjet på en "
"diskett; send så inn en detaljert feilrapport for anaconda på https://"
"bugzilla.redhat.com/bugzilla/"

#: ../gui.py:441 ../text.py:279
msgid ""
"Please insert a floppy now. All contents of the disk will be erased, so "
"please choose your diskette carefully."
msgstr ""
"Sett inn en diskett: Alt innhold på disketten vil slettes, så vær forsiktig "
"når du velger diskett."

#: ../gui.py:506 ../gui.py:947
msgid "Online Help"
msgstr "Online hjelp"

#: ../gui.py:507 ../iw/language_gui.py:21 ../textw/language_text.py:39
msgid "Language Selection"
msgstr "Valg av språk"

#: ../gui.py:599
msgid "Release Notes"
msgstr "Kommentarer til denne utgaven"

#: ../gui.py:636
msgid "Unable to load file!"
msgstr "Kan ikke lese filen!"

#: ../gui.py:673
msgid "Release notes are missing.\n"
msgstr "Notis for denne utgaven mangler.\n"

#: ../gui.py:781 ../packages.py:965
#, fuzzy
msgid "_Back"
msgstr "Tilbake"

#: ../gui.py:783
#, fuzzy
msgid "_Next"
msgstr "Neste"

#: ../gui.py:785
#, fuzzy
msgid "_Release Notes"
msgstr "Kommentarer til denne utgaven"

#: ../gui.py:787
#, fuzzy
msgid "Show _Help"
msgstr "Vis hjelp"

#: ../gui.py:789
#, fuzzy
msgid "Hide _Help"
msgstr "Skjul hjelp"

#: ../gui.py:791
#, fuzzy
msgid "_Debug"
msgstr "Debug"

#: ../gui.py:847
#, python-format
msgid "%s Installer"
msgstr "%s installering"

#: ../gui.py:862
#, python-format
msgid "%s Installer on %s"
msgstr "%s installering på %s"

#: ../gui.py:901
msgid "Unable to load title bar"
msgstr "Kunne ikke laste tittellinjen"

#: ../gui.py:1002
msgid "Install Window"
msgstr "Installasjonsvindu"

#: ../harddrive.py:185
#, python-format
msgid "Missing CD #%d, which is required for the install."
msgstr "Mangler CD #%d, som kreves for å fullføre installasjonen."

#: ../image.py:73
msgid "Copying File"
msgstr "Kopierer fil"

#: ../image.py:74
msgid "Transferring install image to hard drive..."
msgstr "Overfører installasjonsbildet til harddisken..."

#: ../image.py:77
msgid ""
"An error occurred transferring the install image to your hard drive. You are "
"probably out of disk space."
msgstr ""
"En feil oppsto under overføring av installasjonsfilen til din harddisk. Du "
"har sannsynligvis sluppet opp for diskplass."

#: ../image.py:136
msgid "Change CDROM"
msgstr "Bytt CD-ROM"

#: ../image.py:137
#, python-format
msgid "Please insert disc %d to continue."
msgstr "Sett inn CD %d for å fortsette."

#: ../image.py:156
msgid "Wrong CDROM"
msgstr "Feil CD-ROM"

#: ../image.py:157
#, fuzzy, python-format
msgid "That's not the correct %s CDROM."
msgstr "Dette er ikke den korrekte Red Hat CD-ROMen."

#: ../image.py:163
msgid "The CDROM could not be mounted."
msgstr "Denne CD-ROMen kunne ikke monteres."

#: ../installclass.py:40
msgid "Install"
msgstr "Installer"

#: ../network.py:39
msgid "Hostname must start with a valid character in the range 'a-z' or 'A-Z'"
msgstr ""

#: ../network.py:44
msgid "Hostnames can only contain the characters 'a-z', 'A-Z', '-', or '.'"
msgstr ""

#: ../packages.py:39 ../iw/package_gui.py:34
msgid "Proceed with upgrade?"
msgstr "Gå videre med oppgradering?"

#: ../packages.py:40 ../iw/package_gui.py:35
msgid ""
"The filesystems of the Linux installation you have chosen to upgrade have "
"already been mounted. You cannot go back past this point. \n"
"\n"
msgstr ""
"Filsystemene på Linux-systemet du har valgt å oppgradere er allerede "
"montert.\n"
"Du kan ikke gå lengre tilbake enn dette.\n"
"\n"

#: ../packages.py:44 ../iw/package_gui.py:39
msgid "Would you like to continue with the upgrade?"
msgstr "Vil du fortsette med oppgradering?"

#: ../packages.py:113
msgid "Reading"
msgstr "Leser"

#: ../packages.py:113
msgid "Reading package information..."
msgstr "Leser pakkeinformasjon..."

#: ../packages.py:170
msgid "Dependency Check"
msgstr "Sjekk av avhengigheter"

#: ../packages.py:171
msgid "Checking dependencies in packages selected for installation..."
msgstr "Sjekker avhengigheter i pakker valgt for installasjon..."

#: ../packages.py:236 ../packages.py:544
msgid "Processing"
msgstr "Arbeider"

#: ../packages.py:237
msgid "Preparing to install..."
msgstr "Forbereder installasjon..."

#: ../packages.py:280
#, python-format
msgid ""
"The file %s cannot be opened. This is due to a missing file, a bad package, "
"or bad media. Press <return> to try again."
msgstr ""
"Filen %s kan ikke åpnes. Dette pga. en manglende fil, en dårlig pakke, eller "
"et dårlig media. Trykk <Enter> for å prøve igjen."

#: ../packages.py:303
msgid "Error Installing Package"
msgstr "Feil ved installering av pakke"

#: ../packages.py:304
#, fuzzy, python-format
msgid ""
"There was an error installing %s.  This can indicate media failure, lack of "
"disk space, and/or hardware problems.  This is a fatal error and your "
"install will be aborted.  Please verify your media and try "
msgstr ""
"Det oppstod en feil ved installering av %s. Dette kan tyde på feil ved "
"installeringsmediumet, mangel på diskplass og/eller hardwareproblem. Dette "
"er en alvorlig feil, og din installering vil avbrytes. Sjekk "
"installeringsmediumet og prøv på nytt.\n"
"\n"
"Trykk OK for å starte programmet på nytt."

#: ../packages.py:308
msgid ""
"your install again.\n"
"\n"
"Press the OK button to reboot your system."
msgstr ""

#: ../packages.py:545
msgid "Setting up RPM transaction..."
msgstr "Setter opp RPM-transaksjon..."

#: ../packages.py:582
#, python-format
msgid ""
"Upgrading %s packages\n"
"\n"
msgstr ""
"Oppgraderer %s pakker\n"
"\n"

#: ../packages.py:584
#, python-format
msgid ""
"Installing %s packages\n"
"\n"
msgstr ""
"Installerer %s pakker\n"
"\n"

#: ../packages.py:591
#, python-format
msgid "Upgrading %s-%s-%s.\n"
msgstr "Oppgraderer %s-%s-%s.\n"

#: ../packages.py:593
#, python-format
msgid "Installing %s-%s-%s.\n"
msgstr "Installerer %s-%s-%s.\n"

#: ../packages.py:609
#, python-format
msgid ""
"\n"
"\n"
"The following packages were automatically\n"
"selected to be installed:\n"
"%s\n"
"\n"
msgstr ""
"\n"
"\n"
"Følgende pakker ble automatisk valgt for\n"
"installering:\n"
"%s\n"
"\n"

#: ../packages.py:615
msgid "Install Starting"
msgstr "Starter installering"

#: ../packages.py:616
msgid "Starting install process, this may take several minutes..."
msgstr "Starter installeringsprosessen. Dette kan ta noen minutter..."

#: ../packages.py:661
msgid ""
"You don't appear to have enough disk space to install the packages you've "
"selected. You need more space on the following filesystems:\n"
"\n"
msgstr ""
"Det ser ikke ut til at du har nok diskplass til å installere pakkene du har "
"valgt. Du må ha mer plass på følgende filsystemer:\n"
"\n"

#: ../packages.py:665 ../packages.py:685 ../iw/lvm_dialog_gui.py:997
#: ../iw/partition_gui.py:347 ../iw/upgrade_swap_gui.py:149
#: ../textw/partition_text.py:1096 ../textw/upgrade_text.py:109
msgid "Mount Point"
msgstr "Monteringspunkt"

#: ../packages.py:666
msgid "Space Needed"
msgstr "Nødvendig plass"

#: ../packages.py:681
msgid ""
"You don't appear to have enough file nodes to install the packages you've "
"selected. You need more file nodes on the following filesystems:\n"
"\n"
msgstr ""
"Det ser ikke ut til at du har nok filnoder til å installere pakkene du har "
"valgt. Du må ha flere filnoder på følgende filsystemer:\n"

#: ../packages.py:686
msgid "Nodes Needed"
msgstr "Manglende noder"

#: ../packages.py:692
msgid "Disk Space"
msgstr "Diskplass"

#: ../packages.py:713
msgid ""
"\n"
"\n"
"The following packages were available in this version but NOT upgraded:\n"
msgstr ""
"\n"
"\n"
"Følgende pakker er tilgjengelige i denne versjonen men IKKE oppgradert:\n"

#: ../packages.py:730
msgid "Post Install"
msgstr "Etter-installasjon"

#: ../packages.py:731
msgid "Performing post install configuration..."
msgstr "Utfører etter-installasjons konfigurasjon..."

#: ../packages.py:945
msgid "Warning! This is a beta!"
msgstr ""

#: ../packages.py:946
msgid ""
"Thank you for downloading this Red Hat Beta release.\n"
"\n"
"This is not a final release and is not intended for use on production "
"systems.  The purpose of this release is to collect feedback from testers, "
"and it is not suitable for day to day usage.\n"
"\n"
"To report feedback, please visit:\n"
"\n"
"    http://bugzilla.redhat.com/bugzilla\n"
"\n"
"and file a report against 'Red Hat Public Beta'.\n"
msgstr ""

#: ../packages.py:959
#, fuzzy
msgid "_Exit"
msgstr "Avslutt"

#: ../packages.py:959
#, fuzzy
msgid "_Install BETA"
msgstr "Installer"

#: ../packages.py:962
#, fuzzy
msgid "Rebooting System"
msgstr "Oppgrader eksisterende system"

#: ../packages.py:963
msgid "Your system will now be rebooted..."
msgstr ""

#: ../packages.py:965
#, fuzzy
msgid "_Reboot"
msgstr "_Nullstill"

#: ../partedUtils.py:171
msgid "Foreign"
msgstr "Utenlandsk"

#: ../partedUtils.py:241
#, fuzzy, python-format
msgid ""
"The partition table on device /dev/%s is of an unexpected type %s for your "
"architecture.  To use this disk for installation of %s, it must be re-"
"initialized causing the loss of ALL DATA on this drive.\n"
"\n"
"Would you like to initialize this drive?"
msgstr ""
"Partisjonstabellen på enhet /dev/%s er av en uventet type for din "
"arkitektur. For å bruke denne disken for en installasjon av %s må den re-"
"initieres. Dette medfører tap av ALLE DATA på denne disken.\n"
"\n"
"Ønsker du å initiere denne stasjonen?"

#: ../partedUtils.py:452
#, python-format
msgid "Error mounting filesystem on %s: %s"
msgstr "Feil under montering av filsystem på %s: %s"

#: ../partedUtils.py:543
#, fuzzy
msgid "Initializing"
msgstr "Initierer CD-ROM..."

#: ../partedUtils.py:544
#, python-format
msgid "Please wait while formatting drive %s...\n"
msgstr ""

#: ../partedUtils.py:659
#, python-format
msgid ""
"The partition table on device %s was unreadable. To create new partitions it "
"must be initialized, causing the loss of ALL DATA on this drive.\n"
"\n"
"Would you like to initialize this drive?"
msgstr ""
"Partisjonstabellen på enhet %s kunne ikke leses. For å opprette nye "
"partisjoner må denne initieres. Dette medfører tap av ALLE DATA på denne "
"disken.\n"
"\n"
"Ønsker du å initiere denne stasjonen?"

#: ../partedUtils.py:769 ../textw/fdasd_text.py:100
msgid "No Drives Found"
msgstr "Ingen stasjoner funnet"

#: ../partedUtils.py:770
msgid ""
"An error has occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem."
msgstr ""
"En feil har oppstått - ingen gyldige enheter for oppretting av filsystemer "
"ble funnet. Sjekk maskinvaren din for å finne årsaken til problemet."

#: ../partIntfHelpers.py:35
#, fuzzy
msgid "Please enter a volume group name."
msgstr "Vennligst oppgi brukernavn"

#: ../partIntfHelpers.py:39
#, fuzzy
msgid "Volume Group Names must be less than 128 characters"
msgstr "Root-passordet må være minst 6 tegn langt."

#: ../partIntfHelpers.py:42
#, python-format
msgid "Error - the volume group name %s is not valid."
msgstr ""

#: ../partIntfHelpers.py:45
#, fuzzy
msgid "Error - the volume group name contains illegal characters  or spaces."
msgstr "Oppstartsnavnet inneholder ugyldige tegn."

#: ../partIntfHelpers.py:54
#, fuzzy
msgid "Please enter a logical volume name."
msgstr "Vennligst oppgi brukernavn"

#: ../partIntfHelpers.py:58
msgid "Logical Volume Names must be less than 128 characters"
msgstr ""

#: ../partIntfHelpers.py:62
#, python-format
msgid "Error - the logical volume name %s is not valid."
msgstr ""

#: ../partIntfHelpers.py:67
#, fuzzy
msgid "Error - the logical volume name contains illegal characters or spaces."
msgstr "Oppstartsnavnet inneholder ugyldige tegn."

#: ../partIntfHelpers.py:89
msgid ""
"The mount point is invalid.  Mount points must start with '/' and cannot end "
"with '/', and must contain printable characters and no spaces."
msgstr ""
"Monteringspunktet er ugyldig. Monteringspunkter må begynne med '/', kan ikke "
"slutte med '/', og må bare inneholde utskrivbare tegn."

#: ../partIntfHelpers.py:96
msgid "Please specify a mount point for this partition."
msgstr "Spesifiser et monteringspunkt for denne partisjonen."

#: ../partIntfHelpers.py:104
#, fuzzy, python-format
msgid ""
"You cannot %s this partition, as it is holding the datafor the hard drive "
"install."
msgstr ""
"Du kan ikke fjerne denne partisjonen siden den inneholder data for harddisk "
"installasjonen."

#: ../partIntfHelpers.py:110
#, fuzzy, python-format
msgid ""
"You cannot %%s this partition as it is part of the RAID device /dev/md%s."
msgstr ""
"Du kan ikke redigere denne partisjonen da den er en del av en RAID-enhet"

#: ../partIntfHelpers.py:113
#, fuzzy, python-format
msgid "You cannot %s this partition as it is part of a RAID device."
msgstr ""
"Du kan ikke redigere denne partisjonen da den er en del av en RAID-enhet"

#: ../partIntfHelpers.py:119
#, fuzzy, python-format
msgid ""
"You cannot %%s this partition, as it is part of the LVM volume group '%s'."
msgstr ""
"Du kan ikke fjerne denne partisjonen siden den er en del av en RAID-enhet."

#: ../partIntfHelpers.py:122
#, fuzzy, python-format
msgid "You cannot %s this partition, as it is part of a LVM volume group."
msgstr ""
"Du kan ikke fjerne denne partisjonen siden den er en del av en RAID-enhet."

#: ../partIntfHelpers.py:138 ../partIntfHelpers.py:152
#: ../partIntfHelpers.py:162 ../partIntfHelpers.py:179
#, fuzzy
msgid "Unable To Delete"
msgstr "Kan ikke fjerne"

#: ../partIntfHelpers.py:139
#, fuzzy
msgid "You must first select a partition to delete."
msgstr "Du må først velge en partisjon som skal fjernes."

#: ../partIntfHelpers.py:145 ../textw/partition_text.py:1060
msgid "DASD partitions can only be deleted with fdasd"
msgstr ""

#: ../partIntfHelpers.py:153
#, fuzzy
msgid "You cannot delete free space."
msgstr "Du kan ikke fjerne ledig plass."

#: ../partIntfHelpers.py:163
#, fuzzy, python-format
msgid ""
"You cannot delete this partition, as it is an extended partition which "
"contains %s"
msgstr ""
"Du kan ikke redigere denne partisjonen siden den er en utvidet partisjon som "
"inneholder %s"

#: ../partIntfHelpers.py:222 ../partIntfHelpers.py:520
#: ../iw/lvm_dialog_gui.py:679
msgid "Confirm Delete"
msgstr "Bekreft sletting"

#: ../partIntfHelpers.py:223
#, fuzzy, python-format
msgid "You are about to delete all partitions on the device '/dev/%s'."
msgstr ""
"Du er i ferd med å slette partisjonen /dev/%s.\n"
"\n"
"Er du sikker?"

#: ../partIntfHelpers.py:226 ../partIntfHelpers.py:521
#: ../iw/account_gui.py:427 ../iw/lvm_dialog_gui.py:682
#: ../iw/lvm_dialog_gui.py:1020 ../iw/osbootwidget.py:96
#: ../iw/partition_gui.py:1294 ../iw/partition_gui.py:1300
msgid "_Delete"
msgstr "_Slett"

#: ../partIntfHelpers.py:284
msgid "Notice"
msgstr ""

#: ../partIntfHelpers.py:285
#, fuzzy, python-format
msgid ""
"The following partitions were not deleted because they are in use:\n"
"\n"
"%s"
msgstr ""
"\n"
"\n"
"Følgende pakker ble automatisk valgt for\n"
"installering:\n"
"%s\n"
"\n"

#: ../partIntfHelpers.py:301 ../partIntfHelpers.py:314
#: ../partIntfHelpers.py:344 ../partIntfHelpers.py:355
msgid "Unable To Edit"
msgstr "Kan ikke redigere"

#: ../partIntfHelpers.py:302
msgid "You must select a partition to edit"
msgstr "Du må velge en partisjon for redigering"

#: ../partIntfHelpers.py:327
msgid "You must go back and use fdasd to inititalize this partition"
msgstr ""

#: ../partIntfHelpers.py:345
#, python-format
msgid ""
"You cannot edit this partition, as it is an extended partition which "
"contains %s"
msgstr ""
"Du kan ikke redigere denne partisjonen siden den er en utvidet partisjon som "
"inneholder %s"

#: ../partIntfHelpers.py:376
msgid "Format as Swap?"
msgstr "Formater som swap?"

#: ../partIntfHelpers.py:377
#, python-format
msgid ""
"/dev/%s has a partition type of 0x82 (Linux swap) but does not appear to be "
"formatted as a Linux swap partition.\n"
"\n"
"Would you like to format this partition as a swap partition?"
msgstr ""
"/dev/%s har partisjonstype 0x82 (Linux swap), men ser ikke ut til å være "
"formatert som en swappartisjon.\n"
"\n"
"Ønsker du å formatere denne partisjonen som en swappartisjon?"

#: ../partIntfHelpers.py:398
msgid ""
"You have chosen to use a pre-existing partition for this installation "
"without formatting it. Red Hat recommends that you format this partition to "
"make sure files from a previous operating system installation do not cause "
"problems with this installation of Linux. However, if this partition "
"contains files that you need to keep, such as a users home directories, then "
"you should continue without formatting this partition."
msgstr ""

#: ../partIntfHelpers.py:410
msgid "Format?"
msgstr "Formatere?"

#: ../partIntfHelpers.py:410
msgid "Do _Not Format"
msgstr ""

#: ../partIntfHelpers.py:418
msgid "Error with Partitioning"
msgstr "Feil under partisjonering"

#: ../partIntfHelpers.py:419
#, python-format
msgid ""
"The following critical errors exist with your requested partitioning scheme. "
"These errors must be corrected prior to continuing with your install of %s.\n"
"\n"
"%s"
msgstr ""
"Følgende kritiske feil oppsto for ditt forespurte partisjonsopplegg. Disse "
"feilene må rettes opp før du fortsetter med installasjonen av %s\n"
"\n"
"%s"

#: ../partIntfHelpers.py:433
msgid "Partitioning Warning"
msgstr "Advarsel fra partisjonering"

#: ../partIntfHelpers.py:434
#, python-format
msgid ""
"The following warnings exist with your requested partition scheme.\n"
"\n"
"%s\n"
"\n"
"Would you like to continue with your requested partitioning scheme?"
msgstr ""
"Følgende advarsler oppstod med ditt partisjoneringsopplegg.\n"
"\n"
"%s\n"
"\n"
"Vil du fortsette med det forespurte partisjoneringsopplegget?"

#: ../partIntfHelpers.py:448 ../iw/partition_gui.py:635
msgid ""
"The following pre-existing partitions have been selected to be formatted, "
"destroying all data."
msgstr ""
"Disse eksisterende partisjonene er merket for formatering, som vil ødelegge "
"alle data."

#: ../partIntfHelpers.py:451
msgid ""
"Select 'Yes' to continue and format these partitions, or 'No' to go back and "
"change these settings."
msgstr ""
"Velg 'Ja' for å fortsette med formatering av disse partisjonene, eller 'Nei' "
"for å tilbake og endre disse innstillingene."

#: ../partIntfHelpers.py:457
msgid "Format Warning"
msgstr "Formateringsadvarsel"

#: ../partIntfHelpers.py:505
#, python-format
msgid ""
"You are about to delete the volume group \"%s\".\n"
"\n"
"ALL logical volumes in this volume group will be lost!"
msgstr ""

#: ../partIntfHelpers.py:509
#, fuzzy, python-format
msgid "You are about to delete the logical volume \"%s\"."
msgstr ""
"Du er i ferd med å slette en RAID-enhet.\n"
"\n"
"Er du sikker?"

#: ../partIntfHelpers.py:512
#, fuzzy
msgid "You are about to delete a RAID device."
msgstr ""
"Du er i ferd med å slette en RAID-enhet.\n"
"\n"
"Er du sikker?"

#: ../partIntfHelpers.py:515
#, fuzzy, python-format
msgid "You are about to delete the /dev/%s partition."
msgstr ""
"Du er i ferd med å slette partisjonen /dev/%s.\n"
"\n"
"Er du sikker?"

#: ../partIntfHelpers.py:518
msgid "The partition you selected will be deleted."
msgstr ""

#: ../partIntfHelpers.py:528
msgid "Confirm Reset"
msgstr "Bekreft nullstilling"

#: ../partIntfHelpers.py:529
msgid ""
"Are you sure you want to reset the partition table to its original state?"
msgstr ""
"Er du sikker på at du vil nullstille partisjonstabellen til opprinnelig "
"tilstand?"

#: ../partIntfHelpers.py:532 ../iw/partition_gui.py:1295
msgid "_Reset"
msgstr "_Nullstill"

#: ../partitioning.py:83
msgid "Installation cannot continue."
msgstr "Installasjonen kan ikke fortsette."

#: ../partitioning.py:84
msgid ""
"The partitioning options you have chosen have already been activated. You "
"can no longer return to the disk editing screen. Would you like to continue "
"with the installation process?"
msgstr ""
"Partisjoneringsalternativene du har valgt er allerede aktivert. Du vil ikke "
"kunne gå tilbake til skjermen for redigering av disker. Vil du fortsette "
"installasjonsprosessen?"

#: ../partitioning.py:114
msgid "Low Memory"
msgstr "Lite minne"

#: ../partitioning.py:115
#, fuzzy
msgid ""
"As you don't have much memory in this machine, we need to turn on swap space "
"immediately. To do this we'll have to write your new partition table to the "
"disk immediately. Is that OK?"
msgstr ""
"Siden du ikke har mye minne på denne maskinen, må vi benytte et swap-område "
"med en gang. For å gjøre dette må vi skrive den nye partisjonstabellen til "
"disken nå. Er dette ok?"

#: ../partitions.py:737
#, python-format
msgid ""
"You have not defined a root partition (/), which is required for "
"installation of %s to continue."
msgstr ""
"Du har ikke definert en rot-partisjon (/). Dette må gjøres før "
"installasjonen av %s kan fortsette."

#: ../partitions.py:742
#, python-format
msgid ""
"Your root partition is less than 250 megabytes which is usually too small to "
"install %s."
msgstr ""
"Din rot-partisjon er mindre enn 250 megabyte og dette er vanligvis for lite "
"for å installere %s."

#: ../partitions.py:749
msgid ""
"You must create a /boot/efi partition of type FAT and a size of 50 megabytes."
msgstr "Du må lage en /boot/efi-partisjon av type FAT og med størrelse 50 MB."

#: ../partitions.py:757
#, python-format
msgid ""
"Your %s partition is less than %s megabytes which is lower than recommended "
"for a normal %s install."
msgstr ""
"Din %s-partisjon er mindre enn %s megabyte og dette er lavere enn anbefalt "
"for en vanlig installasjon av %s."

#: ../partitions.py:784 ../partRequests.py:617
msgid "Bootable partitions can only be on RAID1 devices."
msgstr "Oppstartbare partisjoner kan kun plasseres på RAID1-enheter."

#: ../partitions.py:790
#, fuzzy
msgid "Bootable partitions cannot be on a logical volume."
msgstr "Oppstartbare partisjoner kan kun plasseres på RAID1-enheter."

#: ../partitions.py:794
msgid ""
"You have not specified a swap partition.  Although not strictly required in "
"all cases, it will significantly improve performance for most installations."
msgstr ""
"Du har ikke spesifisert en swap-partisjon. Selv om det ikke er et strengt "
"krav om dette i alle tilfeller, så vil det øke ytelsen for de fleste "
"installasjoner."

#: ../partitions.py:801
#, python-format
msgid ""
"You have specified more than 32 swap devices.  The kernel for %s only "
"supports 32 swap devices."
msgstr ""
"Du har spesifisert mer en 32 swap-enheter. Kjernen for %s støtter kun 32 "
"swap-enheter."

#: ../partitions.py:812
#, python-format
msgid ""
"You have allocated less swap space (%dM) than available RAM (%dM) on your "
"system.  This could negatively impact performance."
msgstr ""
"Du har allokert mindre swap-område (%dM) enn tilgjengelig RAM (%dM) i ditt "
"system. Dette kan ha negativ innvirkning på ytelsen."

#: ../partitions.py:1013
msgid "the partition in use by the installer."
msgstr "partisjonen er i bruk av installasjonsprogrammet."

#: ../partitions.py:1016
msgid "a partition which is a member of a RAID array."
msgstr "en partisjon som er medlem av et RAID-array."

#: ../partitions.py:1019
#, fuzzy
msgid "a partition which is a member of a LVM Volume Group."
msgstr "en partisjon som er medlem av et RAID-array."

#: ../partRequests.py:214
msgid ""
"This mount point is invalid.  This directory must be on the / filesystem."
msgstr ""
"Monteringspunktet er ugyldig. Denne katalogen må være på \"/\" filsystemet."

#: ../partRequests.py:219
msgid "This mount point must be on a linux filesystem."
msgstr "Dette monteringspunktet må være på et linux-filsystem."

#: ../partRequests.py:234
#, fuzzy, python-format
msgid ""
"The mount point \"%s\" is already in use, please choose a different mount "
"point."
msgstr ""
"Monteringspunktet %s er allerede i bruk. Velg et annet monteringspunkt."

#: ../partRequests.py:248
#, fuzzy, python-format
msgid ""
"The size of the %s partition (%10.2f MB) exceeds the maximum size of %10.2f "
"MB."
msgstr ""
"Størrelsen på %s-partisjonen (størrelse = %s MB) overgår maksimal størrelse "
"på %s MB."

#: ../partRequests.py:436
#, python-format
msgid ""
"The size of the requested partition (size = %s MB) exceeds the maximum size "
"of %s MB."
msgstr ""
"Størrelsen på forespurt partisjon (størrelse = %s MB) overgår maksimal "
"størrelse på %s MB. "

#: ../partRequests.py:441
#, python-format
msgid "The size of the requested partition is negative! (size = %s MB)"
msgstr "Størrelsen på forespurt partisjon er negativ! (størrelse = %s MB)"

#: ../partRequests.py:445
msgid "Partitions can't start below the first cylinder."
msgstr "Partisjoner kan ikke starte under første sylinder."

#: ../partRequests.py:448
msgid "Partitions can't end on a negative cylinder."
msgstr "Partisjoner kan ikke slutte på en negativ sylinder."

#: ../partRequests.py:609
msgid "No members in RAID request, or not RAID level specified."
msgstr "Ingen medlemmer i RAID-forespørsel, eller ingen RAID-nivå oppgitt."

#: ../partRequests.py:621
#, python-format
msgid "A RAID device of type %s requires at least %s members."
msgstr "En RAID-enhet av type %s må ha minst %s medlemmer."

#: ../partRequests.py:627
#, python-format
msgid ""
"This RAID device can have a maximum of %s spares. To have more spares you "
"will need to add members to the RAID device."
msgstr ""
"Denne RAID-enheten kan ha maksimalt %s reservedisker. For å ha flere "
"reservedisker må du legge til medlemmer på RAID-enheten."

#: ../rescue.py:70 ../rescue.py:113 ../rescue.py:208
msgid "When finished please exit from the shell and your system will reboot."
msgstr "Når ferdig, avslutt skallet for å starte systemet på nytt."

#: ../rescue.py:97 ../rescue.py:161 ../rescue.py:169 ../rescue.py:187
msgid "Rescue"
msgstr "Redning"

#: ../rescue.py:98
#, fuzzy, python-format
msgid ""
"The rescue environment will now attempt to find your Red Hat Linux "
"installation and mount it under the directory %s.  You can then make any "
"changes required to your system.  If you want to proceed with this step "
"choose 'Continue'.  You can also choose to mount your filesystems read-only "
"instead of read-write by choosing 'Read-Only'.\n"
"\n"
"If for some reason this process fails you can choose 'Skip' and this step "
"will be skipped and you will go directly to a command shell.\n"
"\n"
msgstr ""
"Redningsmiljøet vil nå forsøke å finne din Red Hat Linux installasjon og "
"montere den under katalogen /mnt/sysimage. Du kan da utføre de nødvendige "
"endringer på systemet. Hvis du vil fortsette med denne oppgaven velg "
"'Fortsett'. Du kan også velge å montere filsystemet uten skrivemulighet (kun "
"lesbart).\n"
"\n"
"Hvis denne prosessen feiler av noen grunn kan du velge 'Hopp over' så vil "
"dette steget bli hoppet over og du vil gå direkte til et kommandoskall.\n"
"\n"

#: ../rescue.py:108 ../iw/partition_gui.py:546 ../loader/loader.c:1229
#: ../loader/loader.c:1237
msgid "Continue"
msgstr "Fortsett"

#: ../rescue.py:108 ../rescue.py:117
msgid "Read-Only"
msgstr "Kun lesbart"

#: ../rescue.py:108 ../rescue.py:110 ../textw/silo_text.py:36
#: ../textw/upgrade_text.py:121 ../loader/loader.c:914 ../loader/loader.c:1295
#: ../loader/loader.c:1297
msgid "Skip"
msgstr "Hopp over"

#: ../rescue.py:140
msgid "System to Rescue"
msgstr "System som skal reddes"

#: ../rescue.py:141 ../textw/upgrade_text.py:212
msgid "What partition holds the root partition of your installation?"
msgstr "Hvilken partisjon inneholder rotpartisjonen til din installasjon?"

#: ../rescue.py:143 ../rescue.py:147 ../iw/congrats_gui.py:28
msgid "Exit"
msgstr "Avslutt"

#: ../rescue.py:162
msgid ""
"Your system had dirty filesystems which you chose not to mount.  Press "
"return to get a shell from which you can fsck and mount your partitions.  "
"The system will reboot automatically when you exit from the shell."
msgstr ""
"Ditt system har filsystemer som ikke er tatt ned kontrollert og som du "
"valgte ikke å montere. Press <Enter> for å starte et skall der du kan kjøre "
"filsystemsjekk og montere dine partisjoner. Systemet vil starte på nytt når "
"du avslutter skallet."

#: ../rescue.py:170
#, fuzzy, python-format
msgid ""
"Your system has been mounted under %s.\n"
"\n"
"Press <return> to get a shell. If you would like to make your system the "
"root environment, run the command:\n"
"\n"
"\tchroot %s\n"
"\n"
"The system will reboot automatically when you exit from the shell."
msgstr ""
"Ditt system ble montert under /mnt/sysimage.\n"
"\n"
"Trykk <Enter> for å gå til skallet. Hvis du vil gjøre ditt system til rot-"
"miljøet, kjør kommandoen:\n"
"\n"
"chroot /mnt/sysimage\n"
"\n"
"Systemet vil starte på nytt når du avslutter skallet."

#: ../rescue.py:188
#, fuzzy, python-format
msgid ""
"An error occurred trying to mount some or all of your system. Some of it may "
"be mounted under %s.\n"
"\n"
"Press <return> to get a shell. The system will reboot automatically when you "
"exit from the shell."
msgstr ""
"En feil oppsto under forsøk på å montere deler av, eller hele systemet. "
"Deler kan være montert under /mnt/sysimage.\n"
"\n"
"Trykk <Enter> for å gå til et skall. Systemet vil starte på nytt når du "
"avslutter skallet."

#: ../rescue.py:194
msgid "Rescue Mode"
msgstr "Redningsmodus"

#: ../rescue.py:195
msgid ""
"You don't have any Linux partitions. Press return to get a shell. The system "
"will reboot automatically when you exit from the shell."
msgstr ""
"Du har ingen Linux-partisjoner. Trykk <Enter> for å gå til et skall. "
"Systemet vil starte på nytt når du avslutter skallet."

#: ../rescue.py:205
#, fuzzy, python-format
msgid "Your system is mounted under the %s directory."
msgstr "Systemet er montert under katalogen \"/mnt/sysimage\"."

#: ../text.py:191
msgid "Help not available"
msgstr "Hjelp ikke tilgjengelig"

#: ../text.py:192
msgid "No help is available for this step of the install."
msgstr "Ingen hjelp tilgjengelig for denne delen av installeringen."

#: ../text.py:278
msgid "Save Crash Dump"
msgstr "Lagre krasjdump"

#: ../text.py:297 ../text.py:300
msgid "Save"
msgstr "Lagre"

#: ../text.py:297 ../text.py:298
msgid "Debug"
msgstr "Debug"

#: ../text.py:332
#, python-format
msgid "%s (C) 2002 Red Hat, Inc."
msgstr "%s (C) 2002 Red Hat, Inc."

#: ../text.py:335
msgid ""
" <F1> for help | <Tab> between elements | <Space> selects | <F12> next screen"
msgstr ""
" <F1> for hjelp | <Tab> mellom elementer | <Mellomrom> velger | <F12> neste "
"skjerm"

#: ../text.py:337
msgid ""
"  <Tab>/<Alt-Tab> between elements   |  <Space> selects   |  <F12> next "
"screen"
msgstr ""
"  <Tab>/Alt-Tab> mellom elementer   | <Mellomrom> velger | <F12> neste "
"skjerm "

#: ../text.py:434
msgid "Cancelled"
msgstr "Avbrutt"

#: ../text.py:435
msgid "I can't go to the previous step from here. You will have to try again."
msgstr "Kan ikke gå tilbake til forrige steg herfra. Du må forsøke igjen."

#: ../upgrade.py:46
msgid "Searching"
msgstr "Søker"

#: ../upgrade.py:47
#, python-format
msgid "Searching for %s installations..."
msgstr "Leter etter installert %s..."

#: ../upgrade.py:88 ../upgrade.py:96
msgid "Dirty Filesystems"
msgstr "Filsystemer merket \"dirty\" (må gjennom filsystemsjekk)"

#: ../upgrade.py:89
#, fuzzy, python-format
msgid ""
"The following filesystems for your Linux system were not unmounted cleanly.  "
"Please boot your Linux installation, let the filesystems be checked and shut "
"down cleanly to upgrade.\n"
"%s"
msgstr ""
"Ett eller flere av filsystemene i ditt Linux-system ble ikke riktig "
"avmontert. Start opp din Linux-installasjon, la filsystemene gå gjennom "
"sjekk, og steng ned på riktig måte før du prøver å oppgradere."

#: ../upgrade.py:97
#, fuzzy, python-format
msgid ""
"The following filesystems for your Linux system were not unmounted cleanly.  "
"Would you like to mount them anyway?\n"
"%s"
msgstr ""
"Ett eller flere av filsystemene i ditt Linux-system ble ikke riktig "
"avmontert. Vil du montere dem likevel?"

#: ../upgrade.py:226 ../upgrade.py:232
msgid "Mount failed"
msgstr "Montering feilet"

#: ../upgrade.py:227
msgid ""
"One or more of the filesystems listed in the /etc/fstab on your Linux system "
"cannot be mounted. Please fix this problem and try to upgrade again."
msgstr ""
"Ett eller flere av filsystemene som er listet i /etc/fstab på ditt Linux-"
"system kan ikke monteres. Rett opp dette problemet og forsøk å oppgradere "
"igjen."

#: ../upgrade.py:233
msgid ""
"One or more of the filesystems listed in the /etc/fstab of your Linux system "
"are inconsistent and cannot be mounted.  Please fix this problem and try to "
"upgrade again."
msgstr ""
"Ett eller flere av filsystemene som er listet i /etc/fstab på ditt Linux-"
"system er inkonsistent kan ikke monteres. Rett opp dette problemet og forsøk "
"å oppgradere igjen."

#: ../upgrade.py:249
msgid ""
"The following files are absolute symbolic links, which we do not support "
"during an upgrade. Please change them to relative symbolic links and restart "
"the upgrade.\n"
"\n"
msgstr ""
"Følgende filer er absolutte symbolske lenker, noe som ikke støttes under "
"oppgradering. Du må endre dem til relative symbolske lenker og starte "
"oppgraderingen på nytt.\n"
"\n"

#: ../upgrade.py:260
#, python-format
msgid "%s not found"
msgstr "%s ikke funnet"

#: ../upgrade.py:282
msgid "Finding"
msgstr "Finner"

#: ../upgrade.py:283
msgid "Finding packages to upgrade..."
msgstr "Finner pakker som skal oppgraderes..."

#: ../upgrade.py:313
msgid "Rebuild of RPM database failed. You may be out of disk space?"
msgstr "Gjenoppbygging av RPM-databasen feilet. Ikke mer diskplass?"

#: ../upgrade.py:331
msgid "An error occurred when finding the packages to upgrade."
msgstr "En feil oppsto under søk etter pakker som skal oppgraderes."

#: ../upgrade.py:386
msgid ""
"This system appears to have third party packages installed that overlap with "
"packages included in Red Hat Linux. Because these packages overlap, "
"continuing the upgrade process may cause them to stop functioning properly "
"or may cause other system instability.  Do you wish to continue the upgrade "
"process?"
msgstr ""
"Dette systemet ser ut til å ha tredjeparts-pakker installert som overlapper "
"med pakker inkludert i Red Hat Linux. Da disse pakkene overlapper er det "
"mulig at du vil oppleve at disse ikke fungerer eller at systemet blir "
"ustabilt hvis du fortsetter med oppgraderingen. Vil du fortsette med "
"oppgraderingsprosessen?"

#: ../upgrade.py:405
msgid ""
"This system does not have an /etc/redhat-release file.  It is possible that "
"this is not a Red Hat Linux system. Continuing with the upgrade process may "
"leave the system in an unusable state.  Do you wish to continue the upgrade "
"process?"
msgstr ""
"Dette systemet har ikke filen /etc/redhat-release. Det er mulig at dette "
"ikke er et Red Hat Linux system. Hvis du fortsetter oppgraderingen kan du "
"risikere at systemet ender som ubrukelig. Vil du fortsette "
"oppgraderingsprosessen?"

#: ../xserver.py:46
msgid "Mouse Not Detected"
msgstr "Fant ikke mus"

#: ../xserver.py:47
msgid ""
"Your mouse was not automatically detected.  To proceed in the graphical "
"installation mode, please proceed to the next screen and provide your mouse "
"information. You may also use text mode installation which does not require "
"a mouse."
msgstr ""
"Musen din ble ikke funnet automatisk. For å fortsette i grafisk "
"installasjonsmodus, fortsett til neste skjerm og oppgi informasjon om din "
"mus. Du kan også bruke tekstmodus-installasjon som ikke er avhengig av mus."

#: ../xserver.py:53 ../xserver.py:54
msgid "Use text mode"
msgstr "Bruk tekstmodus"

#: ../xserver.py:120
msgid "Attempting to start native X server"
msgstr "Forsøker å starte \"native\" X-tjener"

#: ../xserver.py:127
#, fuzzy
msgid "Attempting to start VESA driver X server"
msgstr "Forsøker å starte \"native\" X-tjener"

#: ../xserver.py:140
msgid "Attempting to start VGA16 X server"
msgstr "Forsøker å starte VGA16 X-tjener"

#: ../xserver.py:193
msgid "Waiting for X server to start...log located in /tmp/X.log\n"
msgstr "Venter mens X starter... logg finnes i /tmp/X.log\n"

#: ../xserver.py:220
msgid " X server started successfully."
msgstr "X er startet"

#: ../iw/account_gui.py:27
msgid "Account Configuration"
msgstr "Konfigurasjon av konti"

#: ../iw/account_gui.py:59
msgid "Root password accepted."
msgstr "Root-passord godtatt."

#: ../iw/account_gui.py:64
msgid "Root password is too short."
msgstr "Root-passord er for kort."

#: ../iw/account_gui.py:66
msgid "Root passwords do not match."
msgstr "Root-passordene er ikke like."

#: ../iw/account_gui.py:86
msgid "User password accepted."
msgstr "Brukerpassord godtatt."

#: ../iw/account_gui.py:92
msgid "Root account can not be added here."
msgstr "Root-kontoen kan ikke legges til her."

#: ../iw/account_gui.py:95
#, fuzzy
msgid "System accounts can not be added here."
msgstr "Root-kontoen kan ikke legges til her."

#: ../iw/account_gui.py:97
msgid "Please enter user password."
msgstr "Vennligst skriv inn brukers passord."

#: ../iw/account_gui.py:99
msgid "User password is too short."
msgstr "Brukers passord er for kort."

#: ../iw/account_gui.py:101
msgid "User passwords do not match."
msgstr "Brukerpassordene er ikke like."

#: ../iw/account_gui.py:190
msgid "Add a New User"
msgstr "Legg til ny bruker"

#: ../iw/account_gui.py:199 ../textw/userauth_text.py:90
msgid "Edit User"
msgstr "Rediger bruker"

#: ../iw/account_gui.py:213
#, fuzzy
msgid "Add a User Account"
msgstr "Oppsett av brukerkonto"

#: ../iw/account_gui.py:230
#, fuzzy
msgid "User _Name:"
msgstr "Brukernavn:"

#: ../iw/account_gui.py:238 ../iw/blpasswidget.py:116
#, fuzzy
msgid "_Password:"
msgstr "Passord:"

#: ../iw/account_gui.py:247
#, fuzzy
msgid "Pass_word (confirm):"
msgstr "Passord (bekreft):"

#: ../iw/account_gui.py:256
#, fuzzy
msgid "_Full Name:"
msgstr "Fullt navn:"

#: ../iw/account_gui.py:264
msgid "Please enter user name"
msgstr "Vennligst oppgi brukernavn"

#: ../iw/account_gui.py:347
msgid "Enter the password for the root user (administrator) of this system."
msgstr "Oppgi passord for root-bruker (administrator) for dette systemet."

#: ../iw/account_gui.py:367
#, fuzzy
msgid "_Confirm: "
msgstr "Bekreft: "

#: ../iw/account_gui.py:409
msgid "Account Name"
msgstr "Kontonavn"

#: ../iw/account_gui.py:412 ../textw/userauth_text.py:101
#: ../textw/userauth_text.py:210
msgid "Full Name"
msgstr "Fullt navn"

#: ../iw/account_gui.py:422 ../iw/lvm_dialog_gui.py:1014
#: ../iw/osbootwidget.py:88
#, fuzzy
msgid "_Add"
msgstr "Legg til"

#: ../iw/account_gui.py:424 ../iw/lvm_dialog_gui.py:1017
#: ../iw/network_gui.py:456 ../iw/osbootwidget.py:92
#: ../iw/partition_gui.py:1293 ../iw/partition_gui.py:1299
msgid "_Edit"
msgstr "R_ediger"

#: ../iw/account_gui.py:448
msgid ""
"Additional accounts can be created for other users of this system. Such "
"accounts could be for a personal login account, or for other non-"
"administrative users who need to use this system. Use the <Add> button to "
"enter additional user accounts."
msgstr ""
"Flere kontoer kan opprettes for andre brukere av systemet. Slike kontoer kan "
"være for personlige innloggingskontoer eller for andre ikke-administrative "
"brukere som trenger tilgang til systemet. Bruk <Legg til>-knappen for å "
"opprette flere brukerkontoer."

#: ../iw/auth_gui.py:22 ../textw/userauth_text.py:325
msgid "Authentication Configuration"
msgstr "Konfigurasjon av autentisering"

#: ../iw/auth_gui.py:98
#, fuzzy
msgid "Enable _MD5 passwords"
msgstr "Bruk MD5-passord"

#: ../iw/auth_gui.py:99
#, fuzzy
msgid "Enable shado_w passwords"
msgstr "Bruk skyggepassord"

#: ../iw/auth_gui.py:102
#, fuzzy
msgid "Enable N_IS"
msgstr "Bruk NIS"

#: ../iw/auth_gui.py:103
#, fuzzy
msgid "Use _broadcast to find NIS server"
msgstr "Bruk kringkasting for å finne NIS-tjener"

#: ../iw/auth_gui.py:115
#, fuzzy
msgid "NIS _Domain: "
msgstr "NIS-domene: "

#: ../iw/auth_gui.py:118
#, fuzzy
msgid "NIS _Server: "
msgstr "NIS-tjener: "

#: ../iw/auth_gui.py:142
#, fuzzy
msgid "Enable _LDAP"
msgstr "Bruk LDAP"

#: ../iw/auth_gui.py:145
#, fuzzy
msgid "Use _TLS lookups"
msgstr "Bruk TLS-oppslag"

#: ../iw/auth_gui.py:146
#, fuzzy
msgid "LDAP _Server:"
msgstr "LDAP-tjener:"

#: ../iw/auth_gui.py:149
#, fuzzy
msgid "LDAP _Base DN:"
msgstr "LDAP basis DN:"

#: ../iw/auth_gui.py:177
#, fuzzy
msgid "Enable _Kerberos"
msgstr "Bruk Kerberos"

#: ../iw/auth_gui.py:181
#, fuzzy
msgid "R_ealm:"
msgstr "Område:"

#: ../iw/auth_gui.py:184
#, fuzzy
msgid "K_DC:"
msgstr "KDC:"

#: ../iw/auth_gui.py:187
#, fuzzy
msgid "_Admin Server:"
msgstr "Admin-tjener:"

#: ../iw/auth_gui.py:216
#, fuzzy
msgid "Enable SMB _Authentication"
msgstr "Aktiver SMB-autentisering"

#: ../iw/auth_gui.py:219
#, fuzzy
msgid "SMB _Server:"
msgstr "SMB-tjener:"

#: ../iw/auth_gui.py:222
#, fuzzy
msgid "SMB Work_group:"
msgstr "SMB-arbeidsgruppe:"

#: ../iw/auth_gui.py:250
msgid "NIS"
msgstr "NIS"

#: ../iw/auth_gui.py:251
msgid "LDAP"
msgstr "LDAP"

#: ../iw/auth_gui.py:252
msgid "Kerberos 5"
msgstr "Kerberos 5"

#: ../iw/auth_gui.py:253
msgid "SMB"
msgstr "SMB"

#: ../iw/blpasswidget.py:37 ../iw/blpasswidget.py:105
#: ../textw/bootloader_text.py:387
msgid ""
"A boot loader password prevents users from passing arbitrary options to the "
"kernel.  For highest security, we recommend setting a password, but this is "
"not necessary for more casual users."
msgstr ""
"Et passord for oppstartslasteren hindrer brukere i å gi tilfeldige flagg til "
"kjernen. For høyest mulig sikkerhet anbefaler vi å sette et passord, men "
"dette er ikke nødvendig for brukere med mindre krav til sikkerhet."

#: ../iw/blpasswidget.py:42
#, fuzzy
msgid "_Use a Boot Loader Password"
msgstr "Passord for oppstartslaster:"

#: ../iw/blpasswidget.py:76
#, fuzzy
msgid "Change _password"
msgstr "Vennligst oppgi passord"

#: ../iw/blpasswidget.py:99
#, fuzzy
msgid "Enter Boot Loader Password"
msgstr "Passord for oppstartslaster:"

#: ../iw/blpasswidget.py:122
#, fuzzy
msgid "Con_firm:"
msgstr "Bekreft:"

#: ../iw/blpasswidget.py:143
#, fuzzy
msgid "Passwords don't match"
msgstr "Passordene er ikke like"

#: ../iw/blpasswidget.py:144 ../textw/bootloader_text.py:440
msgid "Passwords do not match"
msgstr "Passordene er ikke like"

#: ../iw/blpasswidget.py:153 ../textw/bootloader_text.py:450
msgid ""
"Your boot loader password is less than six characters.  We recommend a "
"longer boot loader password.\n"
"\n"
"Would you like to continue with this password?"
msgstr ""
"Passordet for oppstartslasteren er kortere enn seks tegn. Vi anbefaler et "
"lengre passord for oppstartskasteren.\n"
"\n"
"Vil du fortsette med dette passordet?"

#: ../iw/bootdisk_gui.py:23
msgid "Boot Disk Creation"
msgstr "Oppretting av oppstartsdiskett"

#: ../iw/bootdisk_gui.py:54 ../textw/bootdisk_text.py:24
#, python-format
msgid ""
"The boot disk allows you to boot your %s system from a floppy diskette.  A "
"boot disk allows you to boot your system if your bootloader configuration "
"stops working.\n"
"\n"
"It is highly recommended you create a boot disk.\n"
"\n"
"Would you like to create a boot disk?"
msgstr ""

#: ../iw/bootdisk_gui.py:69
msgid "_Yes, I would like to create a boot disk"
msgstr ""

#: ../iw/bootdisk_gui.py:72
#, fuzzy
msgid "No, I _do not want to create a boot disk"
msgstr "Jeg ønsker ikke å lage en swapfil."

#: ../iw/bootloader_advanced_gui.py:27
#, fuzzy
msgid "Advanced Boot Loader Configuration"
msgstr "Konfigurasjon av oppstartslaster"

#: ../iw/bootloader_advanced_gui.py:43 ../iw/bootloader_old.py:52
#: ../textw/bootloader_text.py:135
msgid ""
"Forcing the use of LBA32 for your bootloader when not supported by the BIOS "
"can cause your machine to be unable to boot.  We highly recommend you create "
"a boot disk when asked later in the install process.\n"
"\n"
"Would you like to continue and force LBA32 mode?"
msgstr ""
"Tvungen bruk av LBA32 for din oppstartslaster uten at BIOS støtter dette kan "
"forårsake at maskinen ikke kan starte. Vi anbefaler på det sterkeste at du "
"oppretter en oppstartsdiskett når du blir spurt senere i installasjonen.\n"
"\n"
"Vil du fortsette med tvungen bruk av LBA32-modus?"

#: ../iw/bootloader_advanced_gui.py:51
msgid "Force LBA32"
msgstr ""

#: ../iw/bootloader_advanced_gui.py:72
#, fuzzy
msgid "_Force LBA32 (Not normally required)"
msgstr "Tvungen bruk av LBA32 (ikke vanligvis nødvendig)"

#: ../iw/bootloader_advanced_gui.py:76
#, fuzzy
msgid "_General kernel parameters"
msgstr "Parametere for kjerne"

#: ../iw/bootloader_main_gui.py:29 ../iw/bootloader_old.py:22
#: ../textw/bootloader_text.py:50 ../textw/bootloader_text.py:118
#: ../textw/bootloader_text.py:175 ../textw/bootloader_text.py:300
#: ../textw/bootloader_text.py:392
msgid "Boot Loader Configuration"
msgstr "Konfigurasjon av oppstartslaster"

#: ../iw/bootloader_main_gui.py:71
#, fuzzy
msgid "Change Boot Loader"
msgstr "Ingen oppstartslaster"

#: ../iw/bootloader_main_gui.py:89
msgid ""
"You have selected not to install a boot loader on your system.  You will "
"have to create a boot disk to boot your system with this option.\n"
"\n"
"Would you like to continue and not install a boot loader?"
msgstr ""

#: ../iw/bootloader_main_gui.py:101
#, fuzzy
msgid "C_ontinue with no boot loader"
msgstr "Ikke installer oppstartslaster"

#: ../iw/bootloader_main_gui.py:126 ../iw/bootloader_old.py:346
msgid ""
"Please select the boot loader that the computer will use.  GRUB is the "
"default boot loader. However, if you do not wish to overwrite your current "
"boot loader, select \"Do not install a boot loader.\"  "
msgstr ""
"Vennligst velg oppstartslaster som datamaskinen skal bruke. GRUB er forvalgt "
"oppstartslaster. Hvis du ikke vil overskrive din nåværende oppstartslaster, "
"velger du \"Ikke installer en oppstartslaster.\""

#: ../iw/bootloader_main_gui.py:134
#, fuzzy
msgid "Use _GRUB as the boot loader"
msgstr "Bruk GRUB som oppstartslaster"

#: ../iw/bootloader_main_gui.py:137
#, fuzzy
msgid "Use _LILO as the boot loader"
msgstr "Bruk LILO som oppstartslaster"

#: ../iw/bootloader_main_gui.py:138
#, fuzzy
msgid "_Do not install a boot loader"
msgstr "Ikke installer oppstartslaster"

#: ../iw/bootloader_main_gui.py:160
#, fuzzy, python-format
msgid "The %s boot loader will be installed on /dev/%s."
msgstr ""
"Installeringsprogrammet har detektert at oppstartslasteren %s er installert "
"på %s."

#: ../iw/bootloader_main_gui.py:165
msgid "No boot loader will be installed."
msgstr ""

#: ../iw/bootloader_main_gui.py:217
#, fuzzy
msgid "_Change boot loader"
msgstr "Installerer blader..."

#: ../iw/bootloader_main_gui.py:245
#, fuzzy
msgid "Configure advanced boot loader _options"
msgstr "Konfigurasjon av oppstartslaster"

#: ../iw/bootloader_old.py:238 ../iw/bootloader_old.py:433
#: ../iw/silo_gui.py:135 ../iw/silo_gui.py:286 ../iw/upgrade_swap_gui.py:149
#: ../textw/upgrade_text.py:110
msgid "Partition"
msgstr "Partisjon"

#: ../iw/bootloader_old.py:241 ../iw/bootloader_old.py:434
#: ../iw/partition_gui.py:348 ../iw/silo_gui.py:140 ../iw/silo_gui.py:287
#: ../textw/partition_text.py:1096
msgid "Type"
msgstr "Type"

#: ../iw/bootloader_old.py:305 ../iw/bootlocwidget.py:39
msgid "Install Boot Loader record on:"
msgstr "Installer oppstartslaster på:"

#: ../iw/bootloader_old.py:326 ../iw/zipl_gui.py:102 ../textw/zipl_text.py:54
msgid "Kernel Parameters"
msgstr "Kjerneparametere"

#: ../iw/bootloader_old.py:337 ../textw/bootloader_text.py:112
msgid "Force use of LBA32 (not normally required)"
msgstr "Tvungen bruk av LBA32 (ikke vanligvis nødvendig)"

#: ../iw/bootloader_old.py:354 ../iw/silo_gui.py:263
#: ../textw/bootloader_text.py:275 ../textw/silo_text.py:207
#: ../textw/xconfig_text.py:431 ../textw/xconfig_text.py:438
#: ../textw/xconfig_text.py:538 ../textw/xconfig_text.py:539
#: ../textw/xconfig_text.py:558 ../textw/xconfig_text.py:559
msgid "Default"
msgstr "Standard"

#: ../iw/bootloader_old.py:354 ../iw/network_gui.py:367
#: ../iw/partition_gui.py:346 ../iw/silo_gui.py:263
#: ../textw/bootloader_text.py:204 ../textw/bootloader_text.py:275
#: ../textw/mouse_text.py:38 ../textw/partition_text.py:1096
#: ../textw/silo_text.py:142 ../textw/silo_text.py:207
msgid "Device"
msgstr "Enhet"

#: ../iw/bootloader_old.py:355 ../iw/silo_gui.py:263 ../textw/silo_text.py:207
msgid "Partition type"
msgstr "Partisjonstype"

#: ../iw/bootloader_old.py:355 ../iw/bootloader_old.py:444
#: ../iw/silo_gui.py:263 ../iw/silo_gui.py:298 ../textw/bootloader_text.py:205
#: ../textw/bootloader_text.py:275 ../textw/silo_text.py:143
#: ../textw/silo_text.py:207
msgid "Boot label"
msgstr "Oppstartsnavn"

#: ../iw/bootloader_old.py:359
msgid "Use GRUB as the boot loader"
msgstr "Bruk GRUB som oppstartslaster"

#: ../iw/bootloader_old.py:360
msgid "Use LILO as the boot loader"
msgstr "Bruk LILO som oppstartslaster"

#: ../iw/bootloader_old.py:361
msgid "Do not install a boot loader"
msgstr "Ikke installer oppstartslaster"

#: ../iw/bootloader_old.py:441 ../iw/silo_gui.py:294
msgid "Default boot image"
msgstr "Sett standard oppstartsfil"

#: ../iw/bootlocwidget.py:70
msgid "_Change Drive Order"
msgstr ""

#: ../iw/bootlocwidget.py:84
msgid "Unable to Change Drive Order for LILO"
msgstr ""

#: ../iw/bootlocwidget.py:85
msgid "We do not support changing the drive order for use with LILO."
msgstr ""

#: ../iw/bootlocwidget.py:92
msgid "Edit Drive Order"
msgstr ""

#: ../iw/bootlocwidget.py:97
msgid ""
"Please arrange your drives in the order in which they are handled by your "
"BIOS.  This is usually only useful if you have multiple SCSI adaptors or "
"both SCSI and IDE and wish to boot from the SCSI device.\n"
"\n"
"This does change where we think the master boot record is."
msgstr ""

#: ../iw/confirm_gui.py:55
msgid "About to Install"
msgstr "I ferd med å installere"

#: ../iw/confirm_gui.py:60
#, python-format
msgid "Click next to begin installation of %s."
msgstr "Klikk neste for å starte installasjonen av %s."

#: ../iw/confirm_gui.py:61
#, fuzzy
msgid ""
"A complete log of your installation will be in /root/install.log after "
"rebooting your system. You may want to keep this file for later reference. A "
"kickstart file representing the choices you have made will be in /root/"
"anaconda-ks.cfg."
msgstr ""
"En komplett logg av installasjonen vil befinne seg i /tmp/install.log etter "
"omstart av systemet. Du vil kanskje beholde denne filen som et "
"referansepunkt til senere. En kickstart-fil som representerer valgene du "
"gjorde vil være i /root/anaconda-ks.cfg."

#: ../iw/confirm_gui.py:68
msgid "About to Upgrade"
msgstr "I ferd med å oppgradere"

#: ../iw/confirm_gui.py:73
#, python-format
msgid "Click next to begin upgrade of %s."
msgstr "Klikk neste for å starte oppgradering av %s."

#: ../iw/confirm_gui.py:74 ../textw/confirm_text.py:33
#, fuzzy
msgid ""
"A complete log of your upgrade will be in /root/upgrade.log after rebooting "
"your system. You may want to keep this file for later reference."
msgstr ""
"En komplett logg av oppgraderingen vil befinne seg i /tmp/upgrade.log etter "
"omstart av systemet. Du vil kanskje beholde denne filen som referansepunkt "
"til senere."

#: ../iw/congrats_gui.py:22
msgid "Congratulations"
msgstr "Gratulerer"

#: ../iw/congrats_gui.py:47 ../textw/complete_text.py:28
#, python-format
msgid ""
"If you created a boot disk to use to boot your %s system, insert it before "
"you press <Enter> to reboot.\n"
"\n"
msgstr ""
"Hvis du laget en oppstartsdiskett for oppstart av ditt %s-system, sett den i "
"diskettstasjonen før du trykker <Enter> for omstart.\n"
"\n"

#: ../iw/congrats_gui.py:55
#, python-format
msgid ""
"Congratulations, your %s installation is complete.\n"
"\n"
"Remove any floppy diskettes you used during the installation process and "
"press <Enter> to reboot your system. \n"
"\n"
"%sFor information on errata (updates and bug fixes), visit http://www.redhat."
"com/errata.\n"
"\n"
"Information on using and configuring your system is available in the %s "
"manuals at http://www.redhat.com/docs."
msgstr ""
"Gratulerer, din installering av %s er fullført.\n"
"\n"
"Fjern disketter du har brukt under installeringsprosessen og trykk <Enter> "
"for å starte systemet på nytt.\n"
"\n"
"%sFor informasjon om errata (oppdateringer og feilrettinger), besøk http://"
"www.redhat.com/errata.\n"
"\n"
"Informasjon om bruk og konfigurasjon av systemet er tilgjengelig i "
"brukerhåndbøkene for %s, som finnes på http://www.redhat.com/docs."

#: ../iw/dependencies_gui.py:21
msgid "Unresolved Dependencies"
msgstr "Uløste avhengigheter"

#: ../iw/dependencies_gui.py:34 ../iw/package_gui.py:254
#: ../iw/package_gui.py:493 ../textw/packages_text.py:24
#: ../textw/packages_text.py:273
#, python-format
msgid "Total install size: %s"
msgstr "Total størrelse for installasjon: %s"

#: ../iw/dependencies_gui.py:74 ../iw/progress_gui.py:209
#: ../textw/packages_text.py:304
msgid "Package"
msgstr "Pakke"

#: ../iw/dependencies_gui.py:76 ../textw/packages_text.py:304
msgid "Requirement"
msgstr "Avhengighet"

#: ../iw/dependencies_gui.py:90
#, fuzzy
msgid "_Install packages to satisfy dependencies"
msgstr "Installer pakker for å tilfredsstille avhengigheter"

#: ../iw/dependencies_gui.py:93
#, fuzzy
msgid "_Do not install packages that have dependencies"
msgstr "Ikke installer pakker som har avhengigheter"

#: ../iw/dependencies_gui.py:97
#, fuzzy
msgid "I_gnore package dependencies"
msgstr "Ignorer pakkeavhengigheter"

#: ../iw/driveorderwidget.py:44
#, fuzzy
msgid "Drive"
msgstr "Stasjon:"

#: ../iw/driveorderwidget.py:44 ../iw/progress_gui.py:210
#: ../iw/progress_gui.py:273 ../textw/partition_text.py:1096
msgid "Size"
msgstr "Størrelse"

#: ../iw/driveorderwidget.py:44
msgid "Model"
msgstr "Modell"

#: ../iw/examine_gui.py:24
msgid "Upgrade Examine"
msgstr "Sjekk oppgradering"

#: ../iw/examine_gui.py:51
msgid ""
"You don't have any Linux partitions.\n"
"You can't upgrade this sytem!"
msgstr ""
"Du har ingen Linux-partisjoner.\n"
"Du kan ikke oppgradere dette systemet!"

#: ../iw/examine_gui.py:61
msgid "Please select the device containing the root filesystem: "
msgstr "Vennligst velg enheten som inneholder rotfilsystemet: "

#: ../iw/examine_gui.py:89 ../textw/upgrade_text.py:226
#, python-format
msgid "Upgrading the %s installation on partition /dev/%s"
msgstr "Oppgraderer %s-systemet på partisjonen /dev/%s"

#: ../iw/examine_gui.py:95
#, fuzzy
msgid "_Customize packages to be upgraded"
msgstr "Velg pakker som skal oppgraderes"

#: ../iw/fdasd_gui.py:27
msgid "fdasd"
msgstr ""

#: ../iw/fdasd_gui.py:28
#, fuzzy
msgid "Select drive to run fdasd on"
msgstr "Velg disk som fdisk skal kjøres på"

#: ../iw/fdisk_gui.py:26 ../textw/partmethod_text.py:28
msgid "fdisk"
msgstr "fdisk"

#: ../iw/fdisk_gui.py:100
msgid "Select drive to run fdisk on"
msgstr "Velg disk som fdisk skal kjøres på"

#: ../iw/firewall_gui.py:23 ../textw/firewall_text.py:26
msgid "Firewall Configuration"
msgstr "Brannvegg-konfigurasjon"

#: ../iw/firewall_gui.py:124
#, python-format
msgid ""
"Invalid port given: %s.  The proper format is 'port:protocol', where port is "
"between 1 and 65535, and port is either 'tcp' or 'udp'.\n"
"\n"
"For example, '1234:udp'"
msgstr ""

#: ../iw/firewall_gui.py:128
#, fuzzy
msgid "Warning: Bad Token"
msgstr "Advarsel: "

#: ../iw/firewall_gui.py:180
msgid "Please choose your security level:  "
msgstr "Vennligst velg sikkerhetsnivå:  "

#: ../iw/firewall_gui.py:189
#, fuzzy
msgid "Hi_gh"
msgstr "Høyt"

#: ../iw/firewall_gui.py:190
#, fuzzy
msgid "_Medium"
msgstr "Middels"

#: ../iw/firewall_gui.py:191
#, fuzzy
msgid "N_o firewall"
msgstr "Ingen brannvegg"

#: ../iw/firewall_gui.py:207
#, fuzzy
msgid "Use _default firewall rules"
msgstr "Bruk standard regelsett for brannvegg"

#: ../iw/firewall_gui.py:208
#, fuzzy
msgid "_Customize"
msgstr "Tilpass"

#: ../iw/firewall_gui.py:221
#, fuzzy
msgid "_Trusted devices:"
msgstr "Enheter vi stoler på:"

#: ../iw/firewall_gui.py:246
#, fuzzy
msgid "_Allow incoming:"
msgstr "Tillat innkommende:"

#: ../iw/firewall_gui.py:270
#, fuzzy
msgid "Other _ports:"
msgstr "Andre porter:"

#: ../iw/installpath_gui.py:35 ../textw/installpath_text.py:42
msgid "Installation Type"
msgstr "Installasjonstype"

#: ../iw/ipwidget.py:104
#, fuzzy
msgid "IP Address is missing"
msgstr "IP-adresse"

#: ../iw/ipwidget.py:109
msgid "IP Addresses must contain numbers between 1 and 255"
msgstr ""

#: ../iw/ipwidget.py:114 ../iw/ipwidget.py:116
msgid "IP Addresses must contain numbers between 0 and 255"
msgstr ""

#: ../iw/language_gui.py:59 ../textw/language_text.py:40 ../loader/lang.c:306
msgid "What language would you like to use during the installation process?"
msgstr "Hvilket språk ønsker du å bruke under installeringen?"

#: ../iw/language_support_gui.py:22
msgid "Additional Language Support"
msgstr "Støtte for flere språk"

#: ../iw/language_support_gui.py:147
#, fuzzy
msgid "_Choose the default language for this system:   "
msgstr "Velg standard språk for dette systemet:   "

#: ../iw/language_support_gui.py:157
#, fuzzy
msgid "Choose _additional languages you would like to use on this system:"
msgstr "Velg tilleggsspråk du ønsker å bruke på dette systemet:"

#: ../iw/language_support_gui.py:206
#, fuzzy
msgid "_Select all"
msgstr "Velg alle"

#: ../iw/language_support_gui.py:212
#, fuzzy
msgid "Select _Default Only"
msgstr "Velg som standard"

#: ../iw/language_support_gui.py:218
#, fuzzy
msgid "Rese_t"
msgstr "Nullstill"

#: ../iw/lvm_dialog_gui.py:104 ../iw/lvm_dialog_gui.py:150
#: ../iw/lvm_dialog_gui.py:184 ../iw/lvm_dialog_gui.py:257
#: ../iw/lvm_dialog_gui.py:545 ../iw/lvm_dialog_gui.py:593
#: ../iw/lvm_dialog_gui.py:787
msgid "Not enough space"
msgstr ""

#: ../iw/lvm_dialog_gui.py:105
msgid ""
"The physical extent size cannot be changed because otherwise the space "
"required by the currently defined logical volumes will be increased to more "
"than the available space."
msgstr ""

#: ../iw/lvm_dialog_gui.py:114
msgid "Confirm Physical Extent Change"
msgstr ""

#: ../iw/lvm_dialog_gui.py:115
msgid ""
"This change in the value of the physical extent will require the sizes of "
"the current logical volume requests to be rounded up in size to an integer "
"multiple of the physical extent.\n"
"\n"
"This change will take affect immediately."
msgstr ""

#: ../iw/lvm_dialog_gui.py:124 ../iw/lvm_dialog_gui.py:167
#: ../iw/network_gui.py:157 ../iw/network_gui.py:161 ../iw/network_gui.py:182
#, fuzzy
msgid "C_ontinue"
msgstr "Fortsett"

#: ../iw/lvm_dialog_gui.py:151
#, python-format
msgid ""
"The physical extent size cannot be changed because the value selected (%"
"10.2f MB) is larger than the smallest physical volume (%10.2f MB) in the "
"volume group."
msgstr ""

#: ../iw/lvm_dialog_gui.py:160
msgid "Too small"
msgstr ""

#: ../iw/lvm_dialog_gui.py:161
msgid ""
"This change in the value of the physical extent will waste substantial space "
"on one or more of the phyical volumes in the volume group."
msgstr ""

#: ../iw/lvm_dialog_gui.py:185
#, python-format
msgid ""
"The physical extent size cannot be changed because the resulting maximum "
"logical volume size (%10.2f MB) is smaller than one or more of the currently "
"defined logical volumes."
msgstr ""

#: ../iw/lvm_dialog_gui.py:258
msgid ""
"You cannot remove this physical volume because otherwise the volume group "
"will be too small to hold the currently defined logical volumes."
msgstr ""

#: ../iw/lvm_dialog_gui.py:329
msgid "Make Logical Volume"
msgstr ""

#: ../iw/lvm_dialog_gui.py:331
msgid "Edit Logical Volume"
msgstr ""

#: ../iw/lvm_dialog_gui.py:344 ../iw/partition_dialog_gui.py:279
#: ../iw/raid_dialog_gui.py:292
#, fuzzy
msgid "_Mount Point:"
msgstr "Monteringspunkt:"

#: ../iw/lvm_dialog_gui.py:352
#, fuzzy
msgid "_Filesystem Type:"
msgstr "Filsystemtype:"

#: ../iw/lvm_dialog_gui.py:360 ../iw/partition_dialog_gui.py:297
msgid "Original Filesystem Type:"
msgstr "Opprinnelig filsystemtype:"

#: ../iw/lvm_dialog_gui.py:365 ../iw/partition_dialog_gui.py:308
#: ../iw/raid_dialog_gui.py:313
msgid "Unknown"
msgstr "Ukjent"

#: ../iw/lvm_dialog_gui.py:371
msgid "_Logical Volume Name:"
msgstr ""

#: ../iw/lvm_dialog_gui.py:379
msgid "Logical Volume Name:"
msgstr ""

#: ../iw/lvm_dialog_gui.py:387 ../iw/partition_dialog_gui.py:354
#, fuzzy
msgid "_Size (MB):"
msgstr "Størrelse (MB):"

#: ../iw/lvm_dialog_gui.py:393 ../iw/partition_dialog_gui.py:371
#: ../iw/partition_dialog_gui.py:414 ../textw/partition_text.py:317
#: ../textw/partition_text.py:400 ../textw/partition_text.py:484
msgid "Size (MB):"
msgstr "Størrelse (MB):"

#: ../iw/lvm_dialog_gui.py:405
#, python-format
msgid "(Max size is %s MB)"
msgstr ""

#: ../iw/lvm_dialog_gui.py:466
#, fuzzy
msgid "Illegal size"
msgstr "Total størrelse"

#: ../iw/lvm_dialog_gui.py:467
#, fuzzy
msgid "The requested size as entered is not a valid number greater than 0."
msgstr "Størrelsen du oppgav er ikke et gyldig tall."

#: ../iw/lvm_dialog_gui.py:500
#, fuzzy
msgid "Mount point in use"
msgstr "Monteringspunkt"

#: ../iw/lvm_dialog_gui.py:501
#, fuzzy, python-format
msgid "The mount point \"%s\" is in use, please pick another."
msgstr ""
"Monteringspunktet %s er allerede i bruk. Velg et annet monteringspunkt."

#: ../iw/lvm_dialog_gui.py:512
msgid "Illegal Logical Volume Name"
msgstr ""

#: ../iw/lvm_dialog_gui.py:531
msgid "Illegal logical volume name"
msgstr ""

#: ../iw/lvm_dialog_gui.py:532
#, python-format
msgid "The logical volume name \"%s\" is already in use. Please pick another."
msgstr ""

#: ../iw/lvm_dialog_gui.py:546
#, python-format
msgid ""
"The current requested size (%10.2f MB) is larger than maximum logical volume "
"size (%10.2f MB) To increase this limit you can increase the Physical Extent "
"size for this Volume Group."
msgstr ""

#: ../iw/lvm_dialog_gui.py:570 ../iw/partition_dialog_gui.py:170
#: ../iw/partition_dialog_gui.py:182 ../iw/partition_dialog_gui.py:230
#: ../iw/raid_dialog_gui.py:222 ../textw/partition_text.py:813
#: ../textw/partition_text.py:835 ../textw/partition_text.py:1006
msgid "Error With Request"
msgstr "Feil med forespørsel"

#: ../iw/lvm_dialog_gui.py:594 ../iw/lvm_dialog_gui.py:788
#, python-format
msgid ""
"The logical volumes you have configured require %g MB, but the volume group "
"only has %g MB.  Please either make the volume group larger or make the "
"logical volume(s) smaller."
msgstr ""

#: ../iw/lvm_dialog_gui.py:644
msgid "No free slots"
msgstr ""

#: ../iw/lvm_dialog_gui.py:645
#, python-format
msgid "You cannot create more than %s logical volumes per volume group."
msgstr ""

#: ../iw/lvm_dialog_gui.py:651
#, fuzzy
msgid "No free space"
msgstr "Ledig plass"

#: ../iw/lvm_dialog_gui.py:652
msgid ""
"There is no room left in the volume group to create new logical volumes. To "
"add a logical volume you will need to reduce the size of one or more of the "
"currently existing logical volumes"
msgstr ""

#: ../iw/lvm_dialog_gui.py:680
#, fuzzy, python-format
msgid "Are you sure you want to Delete the logical volume \"%s\"?"
msgstr "Er du sikker på at du vil slette denne partisjonen?"

#: ../iw/lvm_dialog_gui.py:799
#, fuzzy
msgid "Invalid Volume Group Name"
msgstr "Ugyldig oppstartsnavn"

#: ../iw/lvm_dialog_gui.py:812
msgid "Name in use"
msgstr ""

#: ../iw/lvm_dialog_gui.py:813
#, fuzzy, python-format
msgid "The volume group name \"%s\" is already in use. Please pick another."
msgstr ""
"Monteringspunktet %s er allerede i bruk. Velg et annet monteringspunkt."

#: ../iw/lvm_dialog_gui.py:857
msgid "Not enough physical volumes"
msgstr ""

#: ../iw/lvm_dialog_gui.py:858
msgid ""
"At least one unused physical volume partition is needed to create a LVM "
"Volume Group.\n"
"\n"
"First create a partition or raid array of type \"physical volume (LVM)\" and "
"then select the \"LVM\" option again."
msgstr ""

#: ../iw/lvm_dialog_gui.py:869
#, fuzzy
msgid "Make LVM Device"
msgstr "Lag RAID-enhet"

#: ../iw/lvm_dialog_gui.py:871
#, fuzzy
msgid "Edit LVM Device"
msgstr "Legg til enhet"

#: ../iw/lvm_dialog_gui.py:887
msgid "_Volume Group Name:"
msgstr ""

#: ../iw/lvm_dialog_gui.py:895
msgid "Volume Group Name:"
msgstr ""

#: ../iw/lvm_dialog_gui.py:904
msgid "_Physical Extent:"
msgstr ""

#: ../iw/lvm_dialog_gui.py:911
msgid "Physical Extent:"
msgstr ""

#: ../iw/lvm_dialog_gui.py:924
msgid "Physical Volumes to _Use:"
msgstr ""

#: ../iw/lvm_dialog_gui.py:930
#, fuzzy
msgid "Used Space:"
msgstr "Diskplass"

#: ../iw/lvm_dialog_gui.py:947
#, fuzzy
msgid "Free Space:"
msgstr "Fri diskplass"

#: ../iw/lvm_dialog_gui.py:965
#, fuzzy
msgid "Total Space:"
msgstr "Total størrelse: "

#: ../iw/lvm_dialog_gui.py:994
msgid "Logical Volume Name"
msgstr ""

#: ../iw/lvm_dialog_gui.py:1000 ../iw/partition_gui.py:352
msgid "Size (MB)"
msgstr "Størrelse (MB)"

#: ../iw/lvm_dialog_gui.py:1031
msgid "Logical Volumes"
msgstr ""

#: ../iw/mouse_gui.py:24
msgid "Mouse Configuration"
msgstr "Konfigurasjon av mus"

#: ../iw/mouse_gui.py:78 ../textw/mouse_text.py:20
msgid "/dev/ttyS0 (COM1 under DOS)"
msgstr "/dev/ttyS0 (COM1 i DOS)"

#: ../iw/mouse_gui.py:79 ../textw/mouse_text.py:21
msgid "/dev/ttyS1 (COM2 under DOS)"
msgstr "/dev/ttyS1 (COM2 i DOS)"

#: ../iw/mouse_gui.py:80 ../textw/mouse_text.py:22
msgid "/dev/ttyS2 (COM3 under DOS)"
msgstr "/dev/ttyS2 (COM3 i DOS)"

#: ../iw/mouse_gui.py:81 ../textw/mouse_text.py:23
msgid "/dev/ttyS3 (COM4 under DOS)"
msgstr "/dev/ttyS3 (COM4 i DOS)"

#: ../iw/mouse_gui.py:91 ../iw/osbootwidget.py:152
#, fuzzy
msgid "_Device"
msgstr "Enhet"

#: ../iw/mouse_gui.py:220
#, fuzzy
msgid "_Emulate 3 Buttons"
msgstr "Emuler 3 knapper"

#: ../iw/mouse_gui.py:234
#, fuzzy
msgid "Which _model mouse is attached to the computer?"
msgstr "Hvilken mustype er koblet til denne datamaskinen?"

#: ../iw/network_gui.py:26 ../iw/network_gui.py:534
msgid "Gateway"
msgstr "Gateway"

#: ../iw/network_gui.py:26 ../iw/network_gui.py:536
msgid "Primary DNS"
msgstr "Primær DNS"

#: ../iw/network_gui.py:27 ../iw/network_gui.py:538
msgid "Secondary DNS"
msgstr "Sekundær DNS"

#: ../iw/network_gui.py:27 ../iw/network_gui.py:540
msgid "Tertiary DNS"
msgstr "Tertiær DNS"

#: ../iw/network_gui.py:29
#, fuzzy
msgid "_Gateway"
msgstr "Gateway"

#: ../iw/network_gui.py:29
#, fuzzy
msgid "_Primary DNS"
msgstr "Primær DNS"

#: ../iw/network_gui.py:30
#, fuzzy
msgid "_Secondary DNS"
msgstr "Sekundær DNS"

#: ../iw/network_gui.py:30
#, fuzzy
msgid "_Tertiary DNS"
msgstr "Tertiær DNS"

#: ../iw/network_gui.py:34
msgid "Network Configuration"
msgstr "Nettverkskonfigurasjon"

#: ../iw/network_gui.py:156 ../iw/network_gui.py:160 ../iw/network_gui.py:164
#: ../iw/network_gui.py:168 ../iw/network_gui.py:173 ../iw/network_gui.py:177
#: ../iw/network_gui.py:182
#, fuzzy
msgid "Error With Data"
msgstr "Feil med forespørsel"

#: ../iw/network_gui.py:157
msgid ""
"You have not specified a hostname.  Depending on your network environment "
"this may cause problems later."
msgstr ""

#: ../iw/network_gui.py:161
#, python-format
msgid ""
"You have not specified the field \"%s\".  Depending on your network "
"environment this may cause problems later."
msgstr ""

#: ../iw/network_gui.py:165
#, python-format
msgid ""
"The hostname \"%s\" is not valid for the following reason:\n"
"\n"
"%s"
msgstr ""

#: ../iw/network_gui.py:169
#, python-format
msgid ""
"An error occurred converting  the value entered for \"%s\":\n"
"\n"
"%s"
msgstr ""

#: ../iw/network_gui.py:174
#, python-format
msgid "A value is required for the field \"%s\"."
msgstr ""

#: ../iw/network_gui.py:178
#, fuzzy
msgid "The IP information you have entered is invalid."
msgstr "Størrelsen du oppgav er ikke et gyldig tall."

#: ../iw/network_gui.py:182
msgid ""
"You have no active network devices.  Your system will not be able to "
"commuciate over a network by default without at least one device active."
msgstr ""

#: ../iw/network_gui.py:201
#, python-format
msgid "Edit Interface %s"
msgstr ""

#: ../iw/network_gui.py:211
#, fuzzy
msgid "Configure using _DHCP"
msgstr "Konfigurer ved bruk av DHCP"

#: ../iw/network_gui.py:217
#, fuzzy
msgid "_Activate on boot"
msgstr "Aktiver ved oppstart"

#: ../iw/network_gui.py:226
#, fuzzy
msgid "_IP Address"
msgstr "IP-adresse"

#: ../iw/network_gui.py:227
#, fuzzy
msgid "Net_mask"
msgstr "Nettmaske"

#: ../iw/network_gui.py:230
msgid "Point to Point (IP)"
msgstr ""

#: ../iw/network_gui.py:253
#, fuzzy, python-format
msgid "Configure %s"
msgstr "Konfigurer TCP/IP"

#: ../iw/network_gui.py:365
#, fuzzy
msgid "Active on Boot"
msgstr "Aktiver ved oppstart"

#: ../iw/network_gui.py:369
#, fuzzy
msgid "IP/Netmask"
msgstr "Nettmaske"

#: ../iw/network_gui.py:392 ../iw/network_gui.py:491
#: ../textw/network_text.py:224 ../loader/net.c:622 ../loader/net.c:817
msgid "Hostname"
msgstr "Vertsnavn"

#: ../iw/network_gui.py:397
#, fuzzy
msgid "Set hostname"
msgstr "Vertsnavn"

#: ../iw/network_gui.py:462
#, fuzzy
msgid "Network Devices"
msgstr "Nettverksenhet: %s"

#: ../iw/network_gui.py:471
msgid "I would like the hostname to be set:"
msgstr ""

#: ../iw/network_gui.py:475
msgid "_automatically via DHCP"
msgstr ""

#: ../iw/network_gui.py:481
msgid "_manually"
msgstr ""

#: ../iw/network_gui.py:544
#, fuzzy
msgid "Miscellaneous Settings"
msgstr "Forskjellig"

#: ../iw/osbootwidget.py:41
msgid ""
"You can configure the boot loader to boot other operating systems.  "
"Additional operating systems can be added to the below list to choose "
"between them on boot."
msgstr ""

#: ../iw/osbootwidget.py:125
msgid "Image"
msgstr ""

#: ../iw/osbootwidget.py:132
msgid ""
"The label is what is displayed in the boot loader to choose to boot this "
"operating system.  The device is the device which it boots from."
msgstr ""

#: ../iw/osbootwidget.py:144
msgid "_Label"
msgstr ""

#: ../iw/osbootwidget.py:188
#, fuzzy
msgid "Default Boot _Target"
msgstr "Sett standard oppstartsfil"

#: ../iw/osbootwidget.py:217
#, fuzzy
msgid "You must specify a label for the entry"
msgstr "Du må velge en partisjon for redigering"

#: ../iw/osbootwidget.py:226
#, fuzzy
msgid "Boot label contains illegal characters"
msgstr "Oppstartsnavnet inneholder ugyldige tegn."

#: ../iw/osbootwidget.py:250
msgid "Duplicate Label"
msgstr ""

#: ../iw/osbootwidget.py:251
#, fuzzy
msgid "This label is already in use for another boot entry."
msgstr "Denne brukeren eksisterer allerede. Velg en annen."

#: ../iw/osbootwidget.py:264
#, fuzzy
msgid "Duplicate Device"
msgstr "Enheter vi stoler på:"

#: ../iw/osbootwidget.py:265
#, fuzzy
msgid "This device is already being used for another boot entry."
msgstr "Denne brukeren eksisterer allerede. Velg en annen."

#: ../iw/osbootwidget.py:329
#, fuzzy
msgid "Cannot Delete"
msgstr "Bekreft sletting"

#: ../iw/osbootwidget.py:330
msgid ""
"This boot target cannot be deleted because it is for the Red Hat Linux "
"system you are about to install."
msgstr ""

#: ../iw/package_gui.py:45 ../textw/packages_text.py:240
msgid "Individual Package Selection"
msgstr "Individuelt pakkevalg"

#: ../iw/package_gui.py:73
#, fuzzy
msgid "All Packages"
msgstr "Pakker"

#: ../iw/package_gui.py:187
#, python-format
msgid ""
"Package: %s\n"
"Version: %s\n"
msgstr ""

#: ../iw/package_gui.py:358
#, fuzzy
msgid "_Tree View"
msgstr "Trevisning"

#: ../iw/package_gui.py:360
#, fuzzy
msgid "_Flat View"
msgstr "Flat visning"

#: ../iw/package_gui.py:375
#, fuzzy
msgid "_Package"
msgstr "Pakke"

#: ../iw/package_gui.py:377
#, fuzzy
msgid "_Size (MB)"
msgstr "Størrelse (MB)"

#: ../iw/package_gui.py:428
msgid "Total size: "
msgstr "Total størrelse: "

#: ../iw/package_gui.py:431
#, fuzzy
msgid "Select _all in group"
msgstr "Velg alle i gruppen"

#: ../iw/package_gui.py:435
#, fuzzy
msgid "_Unselect all in group"
msgstr "Velg bort alle i gruppen"

#: ../iw/package_gui.py:472 ../textw/packages_text.py:60
msgid "Package Group Selection"
msgstr "Valg av pakkegruppe"

#: ../iw/package_gui.py:584
#, fuzzy
msgid "_Select individual packages"
msgstr "Velg individuelle pakker"

#: ../iw/partition_dialog_gui.py:55
msgid "Additional Size Options"
msgstr "Flere alternativer for størrelse"

#: ../iw/partition_dialog_gui.py:60
#, fuzzy
msgid "_Fixed size"
msgstr "Fast størrelse"

#: ../iw/partition_dialog_gui.py:62
#, fuzzy
msgid "Fill all space _up to (MB):"
msgstr "Fyll all plass opp til (MB):"

#: ../iw/partition_dialog_gui.py:72
#, fuzzy
msgid "Fill to maximum _allowable size"
msgstr "Fyll opp til maksimal tillatt størrelse"

#: ../iw/partition_dialog_gui.py:171
msgid "The end cylinder must be greater than the start cylinder."
msgstr ""

#: ../iw/partition_dialog_gui.py:259 ../textw/partition_text.py:626
msgid "Add Partition"
msgstr "Legg til partisjon"

#: ../iw/partition_dialog_gui.py:261
#, fuzzy
msgid "Edit Partition"
msgstr "Legg til partisjon"

#: ../iw/partition_dialog_gui.py:288 ../iw/raid_dialog_gui.py:300
#, fuzzy
msgid "Filesystem _Type:"
msgstr "Filsystemtype:"

#: ../iw/partition_dialog_gui.py:320
#, fuzzy
msgid "Allowable _Drives:"
msgstr "Tillatte stasjoner:"

#: ../iw/partition_dialog_gui.py:333
msgid "Drive:"
msgstr "Stasjon:"

#: ../iw/partition_dialog_gui.py:342
msgid "Original Filesystem Label:"
msgstr "Opprinnelig etikett for filsystem:"

#: ../iw/partition_dialog_gui.py:377
#, fuzzy
msgid "_Start Cylinder:"
msgstr "Startsylinder:"

#: ../iw/partition_dialog_gui.py:395
#, fuzzy
msgid "_End Cylinder:"
msgstr "Sluttsylinder:"

#: ../iw/partition_dialog_gui.py:446
#, fuzzy
msgid "Force to be a _primary partition"
msgstr "Tving til å være en primærpartisjon"

#: ../iw/partition_dialog_gui.py:454
#, fuzzy
msgid "Check for _bad blocks"
msgstr "Sjekk etter dårlige blokker"

#: ../iw/partition_gui.py:351
msgid "Format"
msgstr "Formater"

#: ../iw/partition_gui.py:353 ../textw/partition_text.py:1096
msgid "Start"
msgstr "Start"

#: ../iw/partition_gui.py:354 ../textw/partition_text.py:1096
msgid "End"
msgstr "Slutt"

#: ../iw/partition_gui.py:391
#, fuzzy
msgid ""
"Mount Point/\n"
"RAID/Volume"
msgstr "Monteringspunkt"

#: ../iw/partition_gui.py:393
#, fuzzy
msgid ""
"Size\n"
"(MB)"
msgstr "Størrelse (MB)"

#: ../iw/partition_gui.py:520 ../textw/fdasd_text.py:50
#: ../textw/fdisk_text.py:39
msgid "Disk Setup"
msgstr "Diskoppsett"

#: ../iw/partition_gui.py:603
msgid ""
"The following critical errors exist with your requested partitioning scheme."
msgstr "Følgende kritiske feil oppsto for ditt forespurte partisjonsopplegg."

#: ../iw/partition_gui.py:606
#, python-format
msgid ""
"These errors must be corrected prior to continuing with your install of %s."
msgstr ""
"Disse feilene må rettes opp før du fortsetter med installasjonen av %s."

#: ../iw/partition_gui.py:612
msgid "Partitioning Errors"
msgstr "Feil under partisjonering"

#: ../iw/partition_gui.py:618
msgid "The following warnings exist with your requested partition scheme."
msgstr "Følgende advarsler oppsto med ditt partisjoneringsopplegg."

#: ../iw/partition_gui.py:620
msgid "Would you like to continue with your requested partitioning scheme?"
msgstr "Vil du fortsette med ditt forespurte partisjonsopplegg?"

#: ../iw/partition_gui.py:625
msgid "Partitioning Warnings"
msgstr "Advarsler fra partisjonering"

#: ../iw/partition_gui.py:647
msgid "Format Warnings"
msgstr "Formateringsadvarsler"

#: ../iw/partition_gui.py:652
#, fuzzy
msgid "_Format"
msgstr "Formater"

#: ../iw/partition_gui.py:687
msgid "LVM Volume Groups"
msgstr ""

#: ../iw/partition_gui.py:722
#, fuzzy
msgid "RAID Devices"
msgstr "RAID-enhet %s"

#: ../iw/partition_gui.py:750 ../iw/partition_gui.py:864
#: ../textw/partition_text.py:93 ../textw/partition_text.py:151
msgid "None"
msgstr "Ingen"

#: ../iw/partition_gui.py:768 ../loader/loader.c:1024
msgid "Hard Drives"
msgstr "Harddisker"

#: ../iw/partition_gui.py:830 ../textw/partition_text.py:133
#: ../textw/partition_text.py:172
msgid "Free space"
msgstr "Ledig plass"

#: ../iw/partition_gui.py:832 ../textw/partition_text.py:135
msgid "Extended"
msgstr "Utvidet"

#: ../iw/partition_gui.py:834 ../textw/partition_text.py:137
msgid "software RAID"
msgstr "programvare RAID"

#: ../iw/partition_gui.py:866
msgid "Free"
msgstr "Ledig"

#: ../iw/partition_gui.py:940 ../textw/partition_text.py:199
#, python-format
msgid "Could not allocate requested partitions: %s."
msgstr "Kunne ikke allokere forespurte partisjoner: %s."

#: ../iw/partition_gui.py:949
#, python-format
msgid "Warning: %s."
msgstr "Advarsel: %s."

#: ../iw/partition_gui.py:951
#, fuzzy
msgid "_Modify Partition"
msgstr "Rediger partisjon"

#: ../iw/partition_gui.py:953
#, fuzzy
msgid "_Continue"
msgstr "Fortsett"

#: ../iw/partition_gui.py:1128 ../iw/partition_gui.py:1142
#, fuzzy
msgid "Not supported"
msgstr "Støtte for nettverk"

#: ../iw/partition_gui.py:1129
msgid "LVM is NOT supported on this platform."
msgstr ""

#: ../iw/partition_gui.py:1143
msgid "Software RAID is NOT supported on this platform."
msgstr ""

#: ../iw/partition_gui.py:1150
#, fuzzy
msgid "No RAID minors available"
msgstr "Hjelp ikke tilgjengelig"

#: ../iw/partition_gui.py:1151
msgid ""
"A software RAID device cannot be created because all of the available minors "
"have been used."
msgstr ""

#: ../iw/partition_gui.py:1164
#, fuzzy
msgid "RAID Options"
msgstr "Ingen RAID-partisjoner"

#: ../iw/partition_gui.py:1175
#, python-format
msgid ""
"Software RAID allows you to combine several disks into a larger RAID "
"device.  A RAID device can be configured to provide additional speed and "
"reliability compared to using an individual drive.  For more information on "
"using RAID devices please consult the %s documentation.\n"
"\n"
"You currently have %s software RAID partition(s) free to use.\n"
"\n"
msgstr ""

#: ../iw/partition_gui.py:1186
msgid ""
"To use RAID you must first create at least two partitions of type 'software "
"RAID'.  Then you can create a RAID device which can be formatted and "
"mounted.\n"
"\n"
msgstr ""

#: ../iw/partition_gui.py:1192
#, fuzzy
msgid "What do you want to do now?"
msgstr "Hva vil du gjøre?"

#: ../iw/partition_gui.py:1201
#, fuzzy
msgid "Create a software RAID _partition."
msgstr "Minst to partisjoner med programvare-RAID kreves."

#: ../iw/partition_gui.py:1204
#, python-format
msgid "Create a RAID _device [default=/dev/md%s]."
msgstr ""

#: ../iw/partition_gui.py:1208
#, python-format
msgid "Clone a _drive to create a RAID device [default=/dev/md%s]."
msgstr ""

#: ../iw/partition_gui.py:1247
msgid "Couldn't Create Drive Clone Editor"
msgstr ""

#: ../iw/partition_gui.py:1248
#, fuzzy
msgid "The drive clone editor could not be created for some reason."
msgstr "Kunne ikke montere denne katalogen fra den oppgitte tjeneren"

#: ../iw/partition_gui.py:1296
msgid "Make _RAID"
msgstr "Lag _RAID"

#: ../iw/partition_gui.py:1298
#, fuzzy
msgid "Ne_w"
msgstr "Ny"

#: ../iw/partition_gui.py:1301
#, fuzzy
msgid "Re_set"
msgstr "Nullstill"

#: ../iw/partition_gui.py:1302
#, fuzzy
msgid "R_AID"
msgstr "RAID"

#: ../iw/partition_gui.py:1303
msgid "_LVM"
msgstr ""

#: ../iw/partition_gui.py:1342
msgid "Hide RAID device/LVM Volume _Group members"
msgstr ""

#: ../iw/partition_gui.py:1357 ../textw/partition_text.py:1187
msgid "Automatic Partitioning"
msgstr "Automatisk partisjonering"

#: ../iw/partition_gui.py:1386
#, python-format
msgid "You need to select at least one drive to have %s installed onto."
msgstr "Du må velge minst en disk for installasjon av %s."

#: ../iw/partition_gui.py:1428
msgid "I want to have automatic partitioning:"
msgstr "Jeg vil bruke automatisk partisjonering:"

#: ../iw/partition_gui.py:1459 ../textw/partition_text.py:1210
msgid "Which drive(s) do you want to use for this installation?"
msgstr "Hvilke stasjoner vil du bruke for denne installasjonen?"

#: ../iw/partition_gui.py:1483
#, fuzzy
msgid ""
"Re_view (allows you to see and change the automatic partitioning results)"
msgstr ""
"Revider (lar deg se og endre på resultatet av automatisk partisjonering)"

#: ../iw/partition_ui_helpers_gui.py:87 ../iw/partition_ui_helpers_gui.py:108
#: ../iw/partition_ui_helpers_gui.py:110 ../textw/partition_text.py:221
#: ../textw/partition_text.py:223 ../textw/partition_text.py:225
#: ../textw/partition_text.py:250
msgid "<Not Applicable>"
msgstr "<Ikke brukbar>"

#: ../iw/partition_ui_helpers_gui.py:241
msgid "How would you like to prepare the filesystem on this partition?"
msgstr "Hvordan ønsker du å forberede filsystemet på denne partisjonen?"

#: ../iw/partition_ui_helpers_gui.py:249
#, fuzzy
msgid "Leave _unchanged (preserve data)"
msgstr "La den være (ta vare på data)"

#: ../iw/partition_ui_helpers_gui.py:255
#, fuzzy
msgid "_Format partition as:"
msgstr "Formater partisjon som:"

#: ../iw/partition_ui_helpers_gui.py:278
#, fuzzy
msgid "Mi_grate partition to:"
msgstr "Migrer partisjon til:"

#: ../iw/partition_ui_helpers_gui.py:301
#, fuzzy
msgid "Check for _bad blocks?"
msgstr "Sjekk etter dårlige blokker?"

#: ../iw/partition_ui_helpers_gui.py:335
#, python-format
msgid ""
"Partitions of type '%s' must be constrained to a single drive.  This is done "
"by selecting the drive in the 'Allowed Drives' checklist."
msgstr ""

#: ../iw/partmethod_gui.py:25 ../textw/partmethod_text.py:24
msgid "Disk Partitioning Setup"
msgstr "Oppsett av diskpartisjoner"

#: ../iw/partmethod_gui.py:58
#, fuzzy
msgid "Have the installer _automatically partition for you"
msgstr "La installasjonsprogrammet partisjonere automatisk for deg"

#: ../iw/partmethod_gui.py:61
#, fuzzy
msgid "Manually partition with _Disk Druid"
msgstr "Partisjoner manuelt med Disk Druid"

#: ../iw/partmethod_gui.py:64
#, fuzzy
msgid "Manually partition with _fdisk [experts only]"
msgstr "Partisjoner manuelt med fdisk [kun eksperter]"

#: ../iw/progress_gui.py:29
msgid "Installing Packages"
msgstr "Installerer pakker"

#: ../iw/progress_gui.py:91 ../iw/progress_gui.py:261
msgid "Completed"
msgstr "Ferdig"

#: ../iw/progress_gui.py:97 ../iw/progress_gui.py:260
msgid "Total"
msgstr "Total"

#: ../iw/progress_gui.py:103 ../iw/progress_gui.py:262
msgid "Remaining"
msgstr "Gjenstår"

#: ../iw/progress_gui.py:136
#, python-format
msgid "%s KBytes"
msgstr "%s kB"

#: ../iw/progress_gui.py:211
msgid "Summary"
msgstr "Sammendrag"

#: ../iw/progress_gui.py:241
msgid "Package Progress: "
msgstr "Pakke for pakker: "

#: ../iw/progress_gui.py:246
msgid "Total Progress:   "
msgstr "Fremgang totalt:  "

#: ../iw/progress_gui.py:273
msgid "Status"
msgstr "Status"

#: ../iw/progress_gui.py:273
msgid "Packages"
msgstr "Pakker"

#: ../iw/progress_gui.py:273
msgid "Time"
msgstr "Tid"

#: ../iw/raid_dialog_gui.py:262
msgid ""
"At least two unused software RAID partitions are needed to create a RAID "
"device.\n"
"\n"
"First create at least two partitions of type \"software RAID\", and then "
"select the \"RAID\" option again."
msgstr ""

#: ../iw/raid_dialog_gui.py:276 ../iw/raid_dialog_gui.py:675
#: ../textw/partition_text.py:871
msgid "Make RAID Device"
msgstr "Lag RAID-enhet"

#: ../iw/raid_dialog_gui.py:278 ../textw/partition_text.py:869
#, fuzzy
msgid "Edit RAID Device"
msgstr "Lag RAID-enhet"

#: ../iw/raid_dialog_gui.py:319
#, fuzzy
msgid "RAID _Device:"
msgstr "RAID-enhet %s"

#: ../iw/raid_dialog_gui.py:337
#, fuzzy
msgid "RAID _Level:"
msgstr "RAID-nivå:"

#: ../iw/raid_dialog_gui.py:379
#, fuzzy
msgid "_RAID Members:"
msgstr "RAID-medlemmer:"

#: ../iw/raid_dialog_gui.py:396
#, fuzzy
msgid "Number of _spares:"
msgstr "Antall reservedisker:"

#: ../iw/raid_dialog_gui.py:406
#, fuzzy
msgid "_Format partition?"
msgstr "Formater partisjon?"

#: ../iw/raid_dialog_gui.py:478
msgid ""
"The source drive has no partitions to be cloned.  You must first defined "
"partitions of type 'software RAID' on this drive before it can be cloned."
msgstr ""

#: ../iw/raid_dialog_gui.py:482 ../iw/raid_dialog_gui.py:488
#: ../iw/raid_dialog_gui.py:500 ../iw/raid_dialog_gui.py:513
msgid "Source Drive Error"
msgstr ""

#: ../iw/raid_dialog_gui.py:489
msgid ""
"The source drive selected has partitions on it which are not of type "
"'software RAID'.\n"
"\n"
"These partitions will have to removed before this drive can be cloned. "
msgstr ""

#: ../iw/raid_dialog_gui.py:501
#, python-format
msgid ""
"The source drive selected has partitions which are not constrained to the "
"drive /dev/%s.\n"
"\n"
"These partitions will have to removed or restricted to this drive before "
"this drive can be cloned. "
msgstr ""

#: ../iw/raid_dialog_gui.py:514
msgid ""
"The source drive selected has software RAID partition(s) which are members "
"of an active software RAID device.\n"
"\n"
"These partitions will have to removed before this drive can be cloned."
msgstr ""

#: ../iw/raid_dialog_gui.py:527 ../iw/raid_dialog_gui.py:533
#: ../iw/raid_dialog_gui.py:546
msgid "Target Drive Error"
msgstr ""

#: ../iw/raid_dialog_gui.py:528
#, fuzzy
msgid "Please select the target drives for the clone operation."
msgstr "Vennligst velg skjermen som er koblet til ditt system."

#: ../iw/raid_dialog_gui.py:534
#, python-format
msgid "The source drive /dev/%s cannot be selected as a target drive as well."
msgstr ""

#: ../iw/raid_dialog_gui.py:547
#, python-format
msgid ""
"The target drive /dev/%s has a partition which cannot be removed for the "
"following reason:\n"
"\n"
"\"%s\"\n"
"\n"
"This partition must be removed before this drive can be a target."
msgstr ""

#: ../iw/raid_dialog_gui.py:554
#, fuzzy
msgid "delete"
msgstr "Slett"

#: ../iw/raid_dialog_gui.py:612
#, fuzzy
msgid "Please select a source drive."
msgstr "Vennligst sett inn %s-driverdisketten nå."

#: ../iw/raid_dialog_gui.py:632
#, python-format
msgid ""
"The drive /dev/%s will now be cloned to the following drives:\n"
"\n"
msgstr ""

#: ../iw/raid_dialog_gui.py:637
msgid ""
"\n"
"\n"
"WARNING! ALL DATA ON THE TARGET DRIVES WILL BE DESTROYED."
msgstr ""

#: ../iw/raid_dialog_gui.py:640
#, fuzzy
msgid "Final Warning"
msgstr "Formateringsadvarsel"

#: ../iw/raid_dialog_gui.py:642
#, fuzzy
msgid "Clone Drives"
msgstr "Tillatte stasjoner:"

#: ../iw/raid_dialog_gui.py:651
msgid "There was an error clearing the target drives.  Cloning failed."
msgstr ""

#: ../iw/raid_dialog_gui.py:685
msgid ""
"Clone Drive Tool\n"
"\n"
"This tool allows you to significantly reduce the amount of effort required "
"to setup RAID arrays.  The idea is to take a source drive which has been "
"prepared with the desired partitioning layout, and clone this layout onto "
"other similar sized drives.  Then a RAID device can be created.\n"
"\n"
"NOTE: The source drive must have partitions which are restricted to be on "
"that drive only, and can only contain unused software RAID partitions.  "
"Other partition types are not allowed.\n"
"\n"
"EVERYTHING on the target drive(s) will be destroyed by this process."
msgstr ""

#: ../iw/raid_dialog_gui.py:705
#, fuzzy
msgid "Source Drive:"
msgstr "Stasjon:"

#: ../iw/raid_dialog_gui.py:713
#, fuzzy
msgid "Target Drive(s):"
msgstr "Harddisker"

#: ../iw/raid_dialog_gui.py:721
#, fuzzy
msgid "Drives"
msgstr "Stasjon:"

#: ../iw/silo_gui.py:28
msgid "Silo Configuration"
msgstr "Silo-konfigurasjon"

#: ../iw/silo_gui.py:172
msgid "Install SILO boot record on:"
msgstr "Installer SILO oppstartssektor på:"

#: ../iw/silo_gui.py:189
msgid "Create PROM alias"
msgstr "Opprett PROM-alias"

#: ../iw/silo_gui.py:212
msgid "Set default PROM boot device to linux"
msgstr "Sett standard PROM oppstartsenhet til linux"

#: ../iw/silo_gui.py:216
msgid "Kernel parameters"
msgstr "Parametere for kjerne"

#: ../iw/silo_gui.py:234
msgid "Create boot disk"
msgstr "Lag oppstartsdiskett"

#: ../iw/silo_gui.py:244
msgid "Do not install SILO"
msgstr "Ikke installer SILO"

#: ../iw/timezone_gui.py:26 ../textw/timezone_text.py:95
msgid "Time Zone Selection"
msgstr "Valg av tidssone"

#: ../iw/timezone_gui.py:146 ../iw/timezone_gui.py:147
#, fuzzy
msgid "System clock uses _UTC"
msgstr "Systemklokken bruker UTC"

#: ../iw/timezone_gui.py:170
msgid "Location"
msgstr "Plassering"

#: ../iw/timezone_gui.py:218
#, fuzzy
msgid "Use _Daylight Saving Time (US only)"
msgstr "Bruk \"Daylight Savings Time\" (kun USA)"

#: ../iw/timezone_gui.py:231
msgid "UTC Offset"
msgstr "Forskyvning fra UTC"

#: ../iw/timezone_map_gui.py:108
#, fuzzy
msgid "_Location"
msgstr "Plassering"

#: ../iw/timezone_map_gui.py:110
msgid "Description"
msgstr ""

#: ../iw/upgrade_bootloader_gui.py:27 ../textw/upgrade_bootloader_text.py:72
msgid "Upgrade Boot Loader Configuration"
msgstr "Konfigurasjon av oppstartslaster under oppgradering"

#: ../iw/upgrade_bootloader_gui.py:68
#, fuzzy
msgid "_Update boot loader configuration"
msgstr "Oppdater konfigurasjon av oppstartslaster"

#: ../iw/upgrade_bootloader_gui.py:69
msgid "This will update your current boot loader."
msgstr "Dette vil oppdatere din nåværende oppstartslaster."

#: ../iw/upgrade_bootloader_gui.py:72 ../textw/upgrade_bootloader_text.py:49
#, python-format
msgid ""
"The installer has detected the %s boot loader currently installed on %s."
msgstr ""
"Installeringsprogrammet har detektert at oppstartslasteren %s er installert "
"på %s."

#: ../iw/upgrade_bootloader_gui.py:76
msgid "This is the recommended option."
msgstr "Dette er det anbefalte alternativet."

#: ../iw/upgrade_bootloader_gui.py:80 ../textw/upgrade_bootloader_text.py:57
msgid ""
"The installer is unable to detect the boot loader currently in use on your "
"system."
msgstr ""
"Installeringsprogrammet klarte ikke å finne en oppstartslaster på ditt "
"nåværende system."

#: ../iw/upgrade_bootloader_gui.py:89
#, fuzzy
msgid "_Create new boot loader configuration"
msgstr "Lag ny konfigurasjon for oppstartslaster"

#: ../iw/upgrade_bootloader_gui.py:91
msgid ""
"This will let you create a new boot loader configuration.  If you wish to "
"switch boot loaders, you should choose this."
msgstr ""
"Dette vil la deg lage en ny konfigurering for din oppstartslaster. Hvis du "
"ønsker å bytte oppstartslaster bør du velge dette."

#: ../iw/upgrade_bootloader_gui.py:98
#, fuzzy
msgid "_Skip boot loader updating"
msgstr "Hopp over oppdatering av oppstartslaster"

#: ../iw/upgrade_bootloader_gui.py:99
msgid ""
"This will make no changes to boot loader configuration.  If you are using a "
"third party boot loader, you should choose this."
msgstr ""
"Dette vil ikke endre din oppstartslasterkonfigurasjon. Hvis du bruker en "
"tredjeparts oppstartslaster bør du velge dette."

#: ../iw/upgrade_bootloader_gui.py:111
msgid "What would you like to do?"
msgstr "Hva vil du gjøre?"

#: ../iw/upgrade_migratefs_gui.py:30 ../textw/upgrade_text.py:32
msgid "Migrate Filesystems"
msgstr "Migrer filsystemer"

#: ../iw/upgrade_migratefs_gui.py:55 ../textw/upgrade_text.py:34
#, python-format
msgid ""
"This release of %s supports the ext3 journalling filesystem.  It has several "
"benefits over the ext2 filesystem traditionally shipped in %s.  It is "
"possible to migrate the ext2 formatted partitions to ext3 without data "
"loss.\n"
"\n"
"Which of these partitions would you like to migrate?"
msgstr ""
"Denne utgaven av %s støtter det journalførende ext3-filsystemet. Det har "
"flere fordeler over ext2-filsystemet som tradisjonelt har vært brukt i %s. "
"Det er mulig å migrere ext2-formaterte partisjoner til ext3 uten tap av "
"data.\n"
"\n"
"Hvilke av disse partisjonene vil du migrere?"

#: ../iw/upgrade_swap_gui.py:31
msgid "Upgrade Swap Partition"
msgstr "Swap for oppgradering"

#: ../iw/upgrade_swap_gui.py:102
#, python-format
msgid ""
"The 2.4 kernel needs significantly more swap than older kernels, as much as "
"twice as much swap space as RAM on the system.  You currently have %dMB of "
"swap configured, but you may create additional swap space on one of your "
"file systems now."
msgstr ""
"2.4-kjernen trenger vesentlig mer swap enn eldre kjerner, så mye som\n"
"det dobbelte av systemets RAM. Du har nå %d MB av swap konfigurert,\n"
"men du kan opprette mer swap på et av dine filsystemer nå."

#: ../iw/upgrade_swap_gui.py:109
#, python-format
msgid ""
"\n"
"\n"
"The installer has detected %s MB of RAM.\n"
msgstr ""
"\n"
"\n"
"Installasjonsprogrammet har funnet %s MB med RAM.\n"

#: ../iw/upgrade_swap_gui.py:121
#, fuzzy
msgid "I _want to create a swap file"
msgstr "Jeg ønsker å lage en swapfil."

#: ../iw/upgrade_swap_gui.py:130
#, fuzzy
msgid "Select the _partition to put the swap file on:"
msgstr "Velg partisjonen å legge swapfilen på:"

#: ../iw/upgrade_swap_gui.py:149
msgid "Free Space (MB)"
msgstr "Fri diskplass (MB)"

#: ../iw/upgrade_swap_gui.py:167
#, python-format
msgid ""
"It is recommended that your swap file be at least %d MB.  Please enter a "
"size for the swap file:"
msgstr ""
"Det anbefales at swapfilen er minst %d MB. Oppgi en størrelse for swapfilen:"

#: ../iw/upgrade_swap_gui.py:182
#, fuzzy
msgid "Swap file _size (MB):"
msgstr "Størrelse på swapfil(MB):"

#: ../iw/upgrade_swap_gui.py:192
#, fuzzy
msgid "I _don't want to create a swap file"
msgstr "Jeg ønsker ikke å lage en swapfil."

#: ../iw/upgrade_swap_gui.py:202
msgid ""
"It is stongly recommended that you create a swap file.  Failure to do so "
"could cause the installer to abort abnormally.  Are you sure that you wish "
"to continue?"
msgstr ""
"Det anbefales sterkt at du lager en swapfil. Hvis dette ikke gjøres, kan\n"
"installeringsprogrammet blitt utsatt for feil under installeringen. Er du "
"sikker\n"
"på at du vil fortsette?"

#: ../iw/upgrade_swap_gui.py:210 ../textw/upgrade_text.py:176
msgid "The swap file must be between 1 and 2000 MB in size."
msgstr "Størrelsen på swapfilen må være mellom 1 og 2000 MB."

#: ../iw/upgrade_swap_gui.py:217 ../textw/upgrade_text.py:171
msgid ""
"There is not enough space on the device you selected for the swap partition."
msgstr "Det er ikke nok plass på enheten du oppga for swapområdet."

#: ../iw/welcome_gui.py:20
msgid "Welcome"
msgstr "Velkommen"

#: ../iw/xconfig_gui.py:33 ../textw/xconfig_text.py:24
msgid "DDC Probed Monitor"
msgstr "DDC-monitor"

#: ../iw/xconfig_gui.py:34 ../textw/xconfig_text.py:25
msgid "Unprobed Monitor"
msgstr "Ikke-gjenkjent monitor"

#: ../iw/xconfig_gui.py:40
msgid "Customize Graphics Configuration"
msgstr "Tilpass konfigurasjon av X"

#: ../iw/xconfig_gui.py:207
#, fuzzy
msgid "_Color Depth:"
msgstr "Fargedybde:"

#: ../iw/xconfig_gui.py:213 ../textw/xconfig_text.py:109
msgid "256 Colors (8 Bit)"
msgstr "256 farger (8 bit)"

#: ../iw/xconfig_gui.py:213 ../textw/xconfig_text.py:109
msgid "High Color (16 Bit)"
msgstr "Tusener av farger (16 bit)"

#: ../iw/xconfig_gui.py:213 ../textw/xconfig_text.py:109
msgid "True Color (24 Bit)"
msgstr "Millioner av farger (24 bit)"

#: ../iw/xconfig_gui.py:223
#, fuzzy
msgid "_Screen Resolution:"
msgstr "Skjermoppløsning:"

#: ../iw/xconfig_gui.py:310
#, fuzzy
msgid "   _Test Setting   "
msgstr "   Test Innstillinger  "

#: ../iw/xconfig_gui.py:333
msgid "Please choose your default desktop environment:"
msgstr "Vennligst velg ditt standard skrivebordsmiljø:"

#: ../iw/xconfig_gui.py:335
msgid "Your desktop environment is:"
msgstr "Ditt skrivebordsmiljø er:"

#: ../iw/xconfig_gui.py:350
#, fuzzy
msgid "GNO_ME"
msgstr "GNOME"

#: ../iw/xconfig_gui.py:352
#, fuzzy
msgid "_KDE"
msgstr "KDE"

#: ../iw/xconfig_gui.py:381
msgid "Please choose your login type:"
msgstr "Vennligst velg påloggingstype:"

#: ../iw/xconfig_gui.py:388
#, fuzzy
msgid "T_ext"
msgstr "Tekst"

#: ../iw/xconfig_gui.py:389
#, fuzzy
msgid "_Graphical"
msgstr "Grafisk"

#: ../iw/xconfig_gui.py:406 ../textw/xconfig_text.py:434
msgid "Monitor Configuration"
msgstr "Skjermkonfigurasjon"

#: ../iw/xconfig_gui.py:644
msgid "Generic"
msgstr "Vanlig"

#: ../iw/xconfig_gui.py:691 ../iw/xconfig_gui.py:1044
#, fuzzy
msgid "Restore _original values"
msgstr "Gjenopprett originale verdier"

#: ../iw/xconfig_gui.py:699
#, fuzzy
msgid "Hori_zontal Sync:"
msgstr "Horisontal synkronisering:"

#: ../iw/xconfig_gui.py:702
#, fuzzy
msgid "_Vertical Sync:"
msgstr "Vertikal synkronisering:"

#: ../iw/xconfig_gui.py:709
msgid "kHz"
msgstr "kHz"

#: ../iw/xconfig_gui.py:712
msgid "Hz"
msgstr "Hz"

#: ../iw/xconfig_gui.py:730
msgid "Graphical Interface (X) Configuration"
msgstr "Konfigurasjon av grafisk grensesnitt (X)"

#: ../iw/xconfig_gui.py:755
#, fuzzy
msgid "Unknown video card"
msgstr "Ukjent kort"

#: ../iw/xconfig_gui.py:756
#, python-format
msgid ""
"An error has occurred selecting the video card %s. Please report this error "
"to bugzilla.redhat.com."
msgstr ""

#: ../iw/xconfig_gui.py:780 ../textw/xconfig_text.py:666
msgid "Unspecified video card"
msgstr "Ikke-spesifisert skjermkort"

#: ../iw/xconfig_gui.py:781 ../textw/xconfig_text.py:667
msgid ""
"You need to pick a video card before X configuration can continue.  If you "
"want to skip X configuration entirely choose the 'Skip X Configuration' "
"button."
msgstr ""
"Du må velge et skjermkort før X-konfigurasjonen kan fortsette. Hvis du "
"ønsker å hoppe over X-konfigurasjonen velg 'Hopp over konfigurasjon av X'-"
"knappen."

#: ../iw/xconfig_gui.py:917
msgid ""
"Your video ram size can not be autodetected.  Choose your video ram size "
"from the choices below:"
msgstr ""
"Mengden videominne kunne ikke finnes av autosøk. Velg mengden videoram fra "
"listen under:"

#: ../iw/xconfig_gui.py:925
msgid ""
"In most cases your video hardware can be probed to automatically determine "
"the best settings for your display."
msgstr ""
"I de fleste tilfeller kan grafikk-maskinvaren finnes automatisk for å "
"bestemme de beste innstillingene for din skjerm."

#: ../iw/xconfig_gui.py:931
msgid ""
"If the probed settings do not match your hardware, select the correct "
"hardware settings below:"
msgstr ""
"Hvis innstillingene fra autosøk ikke er riktig for din maskinvare, velg de "
"riktige innstillingene for maskinvaren under:"

#: ../iw/xconfig_gui.py:1022
#, fuzzy
msgid "_Video card RAM: "
msgstr "Minne på skjermkort: "

#: ../iw/xconfig_gui.py:1048
#, fuzzy
msgid "_Skip X Configuration"
msgstr "Hopp over konfigurasjon av X"

#: ../iw/zipl_gui.py:33
#, fuzzy
msgid "z/IPL Boot Loader Configuration"
msgstr "Konfigurasjon av oppstartslaster"

#: ../iw/zipl_gui.py:75 ../textw/zipl_text.py:22
msgid ""
"The z/IPL Boot Loader will now be installed on your system.\n"
"\n"
"The root partition will be the one you selected previously in the partition "
"setup.\n"
"\n"
"The kernel used to start the machine will be the one to be installed by "
"default.\n"
"\n"
"If you wish to make changes later after the installation feel free to change "
"the /etc/zipl.conf configuration file.\n"
"\n"
"You can now enter any additional kernel parameters which your machine or "
"your setup may require."
msgstr ""

#: ../textw/bootdisk_text.py:31
msgid "Boot Disk"
msgstr "Oppstartsdiskett"

#: ../textw/bootloader_text.py:29
msgid "Which boot loader would you like to use?"
msgstr "Hvilken oppstartslaster ønsker du å bruke?"

#: ../textw/bootloader_text.py:45
msgid "Use GRUB Boot Loader"
msgstr "Bruk GRUB oppstartslaster"

#: ../textw/bootloader_text.py:46
msgid "Use LILO Boot Loader"
msgstr "Bruk LILO oppstartslaster"

#: ../textw/bootloader_text.py:47
msgid "No Boot Loader"
msgstr "Ingen oppstartslaster"

#: ../textw/bootloader_text.py:68
msgid "Skip Boot Loader"
msgstr "Hopp over oppstartslaster"

#: ../textw/bootloader_text.py:69
msgid ""
"You have elected to not install any boot loader. It is strongly recommended "
"that you install a boot loader unless you have an advanced need.  A boot "
"loader is almost always required in order to reboot your system into Linux "
"directly from the hard drive.\n"
"\n"
"Are you sure you want to skip boot loader installation?"
msgstr ""
"Du har valgt å ikke installere en oppstartslaster. Det anbefales at du "
"installerer en oppstartslaster med mindre du har et avansert behov. En "
"oppstartslaster er nesten alltid nødvendig for å starte systemet med Linux "
"direkte fra harddisken.\n"
"\n"
"Er du sikker på at du vil hoppe over installasjon av oppstartslaster?"

#: ../textw/bootloader_text.py:103 ../textw/silo_text.py:25
msgid ""
"A few systems will need to pass special options to the kernel at boot time "
"for the system to function properly. If you need to pass boot options to the "
"kernel, enter them now. If you don't need any or aren't sure, leave this "
"blank."
msgstr ""
"For noen få systemer kan det være nødvendig å gi spesielle flagg til kjernen "
"ved oppstart for at systemet skal fungere ordentlig. Hvis du trenger å gi "
"oppstartsflagg til kjernen, skriv dem inn nå. Hvis du ikke trenger dette, "
"eller ikke er sikker, kan du la dette stå tomt."

#: ../textw/bootloader_text.py:176
msgid "Where do you want to install the boot loader?"
msgstr "Hvor vil du installere oppstartslasteren?"

#: ../textw/bootloader_text.py:209 ../textw/silo_text.py:147
#: ../textw/silo_text.py:168
msgid "Clear"
msgstr "Slett"

#: ../textw/bootloader_text.py:217
msgid "Edit Boot Label Please"
msgstr "Vennligst rediger oppstartsnavn"

#: ../textw/bootloader_text.py:235 ../textw/bootloader_text.py:240
msgid "Invalid Boot Label"
msgstr "Ugyldig oppstartsnavn"

#: ../textw/bootloader_text.py:236
msgid "Boot label may not be empty."
msgstr "Oppstartsnavnet kan ikke være tomt."

#: ../textw/bootloader_text.py:241
msgid "Boot label contains illegal characters."
msgstr "Oppstartsnavnet inneholder ugyldige tegn."

#: ../textw/bootloader_text.py:291 ../textw/fdisk_text.py:41
#: ../textw/partition_text.py:1101 ../textw/partition_text.py:1108
#: ../textw/silo_text.py:216 ../textw/silo_text.py:238
#: ../textw/userauth_text.py:225
msgid "Edit"
msgstr "Rediger"

#: ../textw/bootloader_text.py:295 ../textw/silo_text.py:219
msgid ""
"The boot manager Red Hat uses can boot other operating systems as well. You "
"need to tell me what partitions you would like to be able to boot and what "
"label you want to use for each of them."
msgstr ""
"Oppstartslasteren som brukes av Red Hat kan starte andre operativsystemer "
"også. Du må fortelle hvilke partisjoner du ønsker å starte andre systemer "
"fra og hvilket navn du vil gi hvert av dem."

#: ../textw/bootloader_text.py:308
msgid ""
" <Space> selects button | <F2> select default boot entry | <F12> next screen>"
msgstr ""
"<Mellomrom> velger knapp | <F2> velger oppstartsalternativ | <F12> neste "
"skjerm"

#: ../textw/bootloader_text.py:397
msgid "Use a GRUB Password"
msgstr "Bruk passord for GRUB"

#: ../textw/bootloader_text.py:409
msgid "Boot Loader Password:"
msgstr "Passord for oppstartslaster:"

#: ../textw/bootloader_text.py:410
msgid "Confirm:"
msgstr "Bekreft:"

#: ../textw/bootloader_text.py:439
msgid "Passwords Do Not Match"
msgstr "Passordene er ikke like"

#: ../textw/bootloader_text.py:444
msgid "Password Too Short"
msgstr "Passordet er for kort"

#: ../textw/bootloader_text.py:445
msgid "Boot loader password is too short"
msgstr "Passordet for oppstartslasteren er for kort"

#: ../textw/complete_text.py:24
msgid "<Enter> to reboot"
msgstr "<Enter> for å starte på nytt"

#: ../textw/complete_text.py:37
msgid ""
"Remove any floppy diskettes you used during the installation process and "
"press <Enter> to reboot your system.\n"
"\n"
msgstr ""

#: ../textw/complete_text.py:43
msgid "Complete"
msgstr "Ferdig"

#: ../textw/complete_text.py:44
#, fuzzy, python-format
msgid ""
"Congratulations, your %s installation is complete.\n"
"\n"
"%s%sFor information on errata (updates and bug fixes), visit http://www."
"redhat.com/errata.\n"
"\n"
"Information on using your system is available in the %s manuals at http://"
"www.redhat.com/docs."
msgstr ""
"Gratulerer, konfigurasjonen er fullført.\n"
"\n"
"For informasjon om errata (oppdateringer og feilrettinger), besøk http://www."
"redhat.com/errata.\n"
"\n"
"Informasjon om bruk av systemet er tilgjengelig brukerhåndbøkene for %s på "
"http://www.redhat.com/docs."

#: ../textw/confirm_text.py:20
msgid "Installation to begin"
msgstr "Installeringen startes"

#: ../textw/confirm_text.py:21
#, fuzzy
msgid ""
"A complete log of your installation will be in /root/install.log after "
"rebooting your system. You may want to keep this file for later reference."
msgstr ""
"En komplett logg av installeringen vil befinne seg i /tmp/install.log etter "
"omstart av systemet. Du vil kanskje beholde denne filen som et "
"referansepunkt til senere."

#: ../textw/confirm_text.py:24 ../textw/confirm_text.py:26
#: ../textw/confirm_text.py:36 ../textw/confirm_text.py:38
#: ../textw/constants_text.py:44 ../textw/silo_text.py:110
#: ../textw/userauth_text.py:190 ../loader/cdrom.c:33 ../loader/devices.c:95
#: ../loader/devices.c:240 ../loader/devices.c:334 ../loader/lang.c:634
#: ../loader/loader.c:330 ../loader/loader.c:1024 ../loader/loader.c:1094
#: ../loader/loader.c:1369 ../loader/loader.c:1465 ../loader/loader.c:1974
#: ../loader/net.c:186 ../loader/net.c:269 ../loader/net.c:355
#: ../loader/urls.c:198 ../loader/urls.c:419
msgid "Back"
msgstr "Tilbake"

#: ../textw/confirm_text.py:32
msgid "Upgrade to begin"
msgstr "Oppgraderingen startes"

#: ../textw/fdasd_text.py:31
#, fuzzy
msgid "Choose a disk to run fdasd or dasdfmt on"
msgstr "Velg en disk som fdisk skal kjøres på"

#: ../textw/fdasd_text.py:32
#, fuzzy
msgid "Edit Partitions"
msgstr "Legg til partisjon"

#: ../textw/fdasd_text.py:33
#, fuzzy
msgid "Format DASD"
msgstr "Formater"

#: ../textw/fdasd_text.py:74
#, fuzzy, python-format
msgid "An error occurred while running %s on drive %s."
msgstr "En feil oppsto under søk etter pakker som skal oppgraderes."

#: ../textw/fdasd_text.py:85
#, python-format
msgid ""
"Running dasdfmt means the loss of \n"
"ALL DATA on drive %s.\n"
"\n"
"Do you really want this?"
msgstr ""

#: ../textw/fdasd_text.py:101
#, fuzzy
msgid ""
"An error has occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem or use "
"dasdfmt.\n"
"\n"
"Back to the fdasd screen?"
msgstr ""
"En feil har oppstått - ingen gyldige enheter for oppretting av filsystemer "
"ble funnet. Sjekk maskinvaren din for å finne årsaken til problemet."

#: ../textw/fdisk_text.py:40
msgid "Choose a disk to run fdisk on"
msgstr "Velg en disk som fdisk skal kjøres på"

#: ../textw/firewall_text.py:24
msgid "Customize"
msgstr "Tilpass"

#: ../textw/firewall_text.py:28
msgid ""
"A firewall protects against unauthorized network intrusions. High security "
"blocks all incoming accesses. Medium blocks access to system services (such "
"as telnet or printing), but allows other connections. No firewall allows all "
"connections and is not recommended. "
msgstr ""
"En brannvegg beskytter mot innbrudd på nettverket. Høy sikkerhet blokkerer "
"all innkommende trafikk. Medium blokkerer tilgang til systemtjenester (slik "
"som telnet og utskrift), men tillater andre tilkoblinger. Ingen brannvegg "
"tillater alle tilkoblinger og er ikke anbefalt."

#: ../textw/firewall_text.py:44
msgid "Security Level:"
msgstr "Sikkerhetsnivå:"

#: ../textw/firewall_text.py:48
msgid "High"
msgstr "Høyt"

#: ../textw/firewall_text.py:51
msgid "Medium"
msgstr "Middels"

#: ../textw/firewall_text.py:54
msgid "No firewall"
msgstr "Ingen brannvegg"

#: ../textw/firewall_text.py:73
msgid "Trusted Devices:"
msgstr "Enheter vi stoler på:"

#: ../textw/firewall_text.py:85
msgid "Allow incoming:"
msgstr "Tillat innkommende:"

#: ../textw/firewall_text.py:90
msgid "DHCP"
msgstr "DHCP"

#: ../textw/firewall_text.py:92
msgid "SSH"
msgstr "SSH"

#: ../textw/firewall_text.py:94 ../loader/telnetd.c:64 ../loader/telnetd.c:106
msgid "Telnet"
msgstr "Telnet"

#: ../textw/firewall_text.py:96
msgid "WWW (HTTP)"
msgstr "WWW (HTTP)"

#: ../textw/firewall_text.py:98
msgid "Mail (SMTP)"
msgstr "E-post (SMTP)"

#: ../textw/firewall_text.py:100 ../loader/loader.c:1664
msgid "FTP"
msgstr "FTP"

#: ../textw/firewall_text.py:104
msgid "Other ports"
msgstr "Andre porter"

#: ../textw/firewall_text.py:130 ../textw/firewall_text.py:193
#: ../textw/language_text.py:153
msgid "Invalid Choice"
msgstr "Ugyldig valg"

#: ../textw/firewall_text.py:131
msgid "You cannot customize a disabled firewall."
msgstr "Du kan ikke tilpasse en deaktivert brannvegg."

#: ../textw/firewall_text.py:136
msgid "Firewall Configuration - Customize"
msgstr "Konfigurasjon av brannvegg - Tilpass"

#: ../textw/firewall_text.py:138
msgid ""
"You can customize your firewall in two ways. First, you can select to allow "
"all traffic from certain network interfaces. Second, you can allow certain "
"protocols explicitly through the firewall. In a comma separated list, "
"specify additional ports in the form 'service:protocol' such as 'imap:tcp'. "
msgstr ""
"Du kan tilpasse din brannvegg på to måter. Du kan velge å tillate all "
"trafikk fra enkelte nettverksgrensesnitt. Videre kan du tillate visse "
"protokoller eksplisitt gjennom brannveggen. Du kan spesifisere flere porter "
"på formen 'tjeneste:protokoll' i en komma-separert liste, f.eks. 'imap:tcp'."

#: ../textw/firewall_text.py:194
#, python-format
msgid "Warning: %s is not a valid port."
msgstr "Advarsel: %s er ikke en gyldig port."

#: ../textw/installpath_text.py:43
msgid "What type of system would you like to install?"
msgstr "Hvilken installeringstype ønsker du?"

#: ../textw/keyboard_text.py:36
msgid "Keyboard Selection"
msgstr "Tastaturvalg"

#: ../textw/keyboard_text.py:37
msgid "Which model keyboard is attached to this computer?"
msgstr "Hvilken type tastatur brukes på denne datamaskinen?"

#: ../textw/language_text.py:116
msgid "Select All"
msgstr "Velg alle"

#: ../textw/language_text.py:116
msgid "Reset"
msgstr "Nullstill"

#: ../textw/language_text.py:118
msgid "Choose additional languages that you would like to use on this system:"
msgstr "Velg tilleggsspråk du ønsker å bruke på dette systemet:"

#: ../textw/language_text.py:122
msgid "Language Support"
msgstr "Språkstøtte"

#: ../textw/language_text.py:154
msgid "You must select at least one language to install."
msgstr "Du må velge minst ett språk for installasjon."

#: ../textw/language_text.py:182
msgid "Default Language"
msgstr "Standardspråk"

#: ../textw/language_text.py:183
msgid "Choose the default language for this system: "
msgstr "Velg standardspråk for dette systemet: "

#: ../textw/mouse_text.py:39
msgid "What device is your mouse located on?"
msgstr "Hvilken enhet er musen plassert på?"

#: ../textw/mouse_text.py:71
msgid "Which model mouse is attached to this computer?"
msgstr "Hvilken mustype brukes på denne datamaskinen?"

#: ../textw/mouse_text.py:82
msgid "Emulate 3 Buttons?"
msgstr "Emuler 3 knapper?"

#: ../textw/mouse_text.py:85
msgid "Mouse Selection"
msgstr "Musvalg"

#: ../textw/network_text.py:67
#, python-format
msgid "Network Device: %s"
msgstr "Nettverksenhet: %s"

#: ../textw/network_text.py:70
msgid "Use bootp/dhcp"
msgstr "Bruk bootp/dhcp"

#: ../textw/network_text.py:73
msgid "Activate on boot"
msgstr "Aktiver ved oppstart"

#: ../textw/network_text.py:83 ../loader/net.c:305
msgid "IP address:"
msgstr "IP-adresse:"

#: ../textw/network_text.py:84 ../loader/net.c:308
msgid "Netmask:"
msgstr "Nettmaske:"

#: ../textw/network_text.py:85 ../loader/net.c:311
msgid "Default gateway (IP):"
msgstr "Standard gateway (IP):"

#: ../textw/network_text.py:87 ../loader/net.c:314
msgid "Primary nameserver:"
msgstr "Primær navnetjener:"

#: ../textw/network_text.py:89
msgid "Secondary nameserver:"
msgstr "Sekundær navnetjener:"

#: ../textw/network_text.py:91
msgid "Tertiary nameserver:"
msgstr "Tertiær navnetjener:"

#: ../textw/network_text.py:94
#, fuzzy
msgid "Point to Point (IP):"
msgstr "Monteringspunkt:"

#: ../textw/network_text.py:129
#, python-format
msgid "Network Configuration for %s"
msgstr "Nettverkskonfigurasjon for %s"

#: ../textw/network_text.py:152
msgid "Invalid information"
msgstr "Ugyldig informasjon"

#: ../textw/network_text.py:153
msgid "You must enter valid IP information to continue"
msgstr "Du må skrive inn gyldig IP-informasjon for å fortsette"

#: ../textw/network_text.py:220
msgid "Hostname Configuration"
msgstr "Konfigurasjon av vertsnavn"

#: ../textw/network_text.py:221
msgid ""
"The hostname is the name of your computer.  If your computer is attached to "
"a network, this may be assigned by your network administrator."
msgstr ""
"Vertsnavnet er navnet på din datamaskin.  Hvis datamaskinen er tilknyttet et "
"nettverk, er det mulig at dette oppgis av din nettverksadministrator."

#: ../textw/packages_text.py:53
msgid "Select individual packages"
msgstr "Velg individuelle pakker"

#: ../textw/packages_text.py:94
msgid "Package :"
msgstr "Pakke     :"

#: ../textw/packages_text.py:99
msgid "Size    :"
msgstr "Størr.   :"

#: ../textw/packages_text.py:100
#, python-format
msgid "%.1f KBytes"
msgstr "%.1f kB"

#: ../textw/packages_text.py:119
msgid "Total size"
msgstr "Total størrelse"

#: ../textw/packages_text.py:248
msgid ""
"   <Space>,<+>,<-> selection   |   <F1> help   |   <F2> package description"
msgstr ""
"   <Mellomrom>,<+>,<-> valg    |   <F1 hjelp   |   <F2> pakkebeskrivelse"

#: ../textw/packages_text.py:296
msgid "Package Dependencies"
msgstr "Pakkeavhengigheter"

#: ../textw/packages_text.py:298
msgid ""
"Some of the packages you have selected to install require packages you have "
"not selected. If you just select OK all of those required packages will be "
"installed."
msgstr ""
"Noen av pakkene du har valgt å installere trenger pakker som ikke er valgt. "
"Hvis du velger Ok vil alle de nødvendige pakkene bli installert."

#: ../textw/packages_text.py:319
msgid "Install packages to satisfy dependencies"
msgstr "Installer pakker for å tilfredsstille avhengigheter"

#: ../textw/packages_text.py:320
msgid "Do not install packages that have dependencies"
msgstr "Ikke installer pakker som har avhengigheter"

#: ../textw/packages_text.py:321
msgid "Ignore package dependencies"
msgstr "Ignorer pakkeavhengigheter"

#: ../textw/partition_text.py:39
msgid "Must specify a value"
msgstr "Verdi må spesifiseres"

#: ../textw/partition_text.py:42
msgid "Requested value is not an integer"
msgstr "Forespurt verdi er ikke et heltall"

#: ../textw/partition_text.py:44
msgid "Requested value is too large"
msgstr "Forespurt verdi er for stor"

#: ../textw/partition_text.py:98
#, python-format
msgid "RAID Device %s"
msgstr "RAID-enhet %s"

#: ../textw/partition_text.py:202
#, python-format
msgid "Warning: %s"
msgstr "Advarsel: %s"

#: ../textw/partition_text.py:203
msgid "Modify Partition"
msgstr "Rediger partisjon"

#: ../textw/partition_text.py:203
msgid "Add anyway"
msgstr "Legg til likevel"

#: ../textw/partition_text.py:240
msgid "Mount Point:"
msgstr "Monteringspunkt:"

#: ../textw/partition_text.py:261
msgid "Filesystem type:"
msgstr "Filsystemtype:"

#: ../textw/partition_text.py:295
msgid "Allowable Drives:"
msgstr "Tillatte stasjoner:"

#: ../textw/partition_text.py:351
msgid "Fixed Size:"
msgstr "Fast størrelse:"

#: ../textw/partition_text.py:353
msgid "Fill maximum size of (MB):"
msgstr "Fyll maksimal størrelse på (MB):"

#: ../textw/partition_text.py:357
msgid "Fill all available space:"
msgstr "Fyll all tilgjengelig plass:"

#: ../textw/partition_text.py:380
msgid "Start Cylinder:"
msgstr "Startsylinder:"

#: ../textw/partition_text.py:393
msgid "End Cylinder:"
msgstr "Sluttsylinder:"

#: ../textw/partition_text.py:417
msgid "RAID Level:"
msgstr "RAID-nivå:"

#: ../textw/partition_text.py:435
msgid "RAID Members:"
msgstr "RAID-medlemmer:"

#: ../textw/partition_text.py:454
msgid "Number of spares?"
msgstr "Antall reservedisker?"

#: ../textw/partition_text.py:468
msgid "Filesystem Type:"
msgstr "Filsystemtype:"

#: ../textw/partition_text.py:478
msgid "Filesystem Label:"
msgstr "Etikett for filsystem:"

#: ../textw/partition_text.py:489
msgid "Filesystem Option:"
msgstr "Alternativer for filsystem:"

#: ../textw/partition_text.py:492 ../textw/partition_text.py:725
#: ../textw/partition_text.py:953
#, python-format
msgid "Format as %s"
msgstr "Formater som %s"

#: ../textw/partition_text.py:494 ../textw/partition_text.py:727
#: ../textw/partition_text.py:955
#, python-format
msgid "Migrate to %s"
msgstr "Migrer til %s"

#: ../textw/partition_text.py:496 ../textw/partition_text.py:729
#: ../textw/partition_text.py:957
msgid "Leave unchanged"
msgstr "La være"

#: ../textw/partition_text.py:512 ../textw/partition_text.py:701
#: ../textw/partition_text.py:933
msgid "Filesystem Options"
msgstr "Alternativer for filsystem"

#: ../textw/partition_text.py:515
msgid ""
"Please choose how you would like to prepare the filesystem on this partition."
msgstr ""
"Vennligst velg hvordan du ønsker å forberede filsystemet på denne "
"partisjonen."

#: ../textw/partition_text.py:523 ../textw/partition_text.py:671
msgid "Check for bad blocks"
msgstr "Sjekk etter dårlige blokker"

#: ../textw/partition_text.py:527
msgid "Leave unchanged (preserve data)"
msgstr "La den være (ta vare på data)"

#: ../textw/partition_text.py:536
msgid "Format as:"
msgstr "Formater som:"

#: ../textw/partition_text.py:556
msgid "Migrate to:"
msgstr "Migrer til:"

#: ../textw/partition_text.py:668
msgid "Force to be a primary partition"
msgstr "Tving til å være en primærpartisjon"

#: ../textw/partition_text.py:679
#, fuzzy
msgid "Not Supported"
msgstr "Støtte for nettverk"

#: ../textw/partition_text.py:680
msgid "LVM Volume Groups can only be editted in the graphical installer."
msgstr ""

#: ../textw/partition_text.py:754 ../textw/partition_text.py:803
msgid "Invalid Entry for Partition Size"
msgstr "Ugyldig verdi for partisjonsstørrelse"

#: ../textw/partition_text.py:766
msgid "Invalid Entry for Maximum Size"
msgstr "Ugyldig oppføring for maksimum størrelse"

#: ../textw/partition_text.py:785
msgid "Invalid Entry for Starting Cylinder"
msgstr "Ugyldig verdi for startsylinder"

#: ../textw/partition_text.py:795
msgid "Invalid Entry for End Cylinder"
msgstr "Ugyldig verdi for sluttsylinder"

#: ../textw/partition_text.py:906
msgid "No RAID partitions"
msgstr "Ingen RAID-partisjoner"

#: ../textw/partition_text.py:907
msgid "At least two software RAID partitions are needed."
msgstr "Minst to partisjoner med programvare-RAID kreves."

#: ../textw/partition_text.py:919
msgid "Format partition?"
msgstr "Formater partisjon?"

#: ../textw/partition_text.py:981
msgid "Invalid Entry for RAID Spares"
msgstr "Ugyldig verdi for RAID-reservedisker"

#: ../textw/partition_text.py:994
msgid "Too many spares"
msgstr "For mange reservedisker"

#: ../textw/partition_text.py:995
msgid "The maximum number of spares with a RAID0 array is 0."
msgstr "Maksimalt antall reservedisker med for en RAID0-array er 0."

#: ../textw/partition_text.py:1049
msgid "You must go back and use fdasd to initialize this partition"
msgstr ""

#: ../textw/partition_text.py:1090
msgid "Partitioning"
msgstr "Partisjonering"

#: ../textw/partition_text.py:1102 ../textw/partition_text.py:1109
#: ../textw/userauth_text.py:224
msgid "Delete"
msgstr "Slett"

#: ../textw/partition_text.py:1103 ../textw/partition_text.py:1110
msgid "RAID"
msgstr "RAID"

#: ../textw/partition_text.py:1105
#, fuzzy
msgid ""
"    F1-Help                 F3-Edit   F4-Delete    F5-Reset    F12-OK        "
msgstr ""
"    F1-Hjelp    F2-Ny     F3-Rediger F4-Slett    F5-Nullstill F12-OK       "

#: ../textw/partition_text.py:1107
msgid "New"
msgstr "Ny"

#: ../textw/partition_text.py:1113
msgid ""
"    F1-Help     F2-New      F3-Edit   F4-Delete    F5-Reset    F12-OK        "
msgstr ""
"    F1-Hjelp    F2-Ny     F3-Rediger F4-Slett    F5-Nullstill F12-OK       "

#: ../textw/partition_text.py:1142
msgid "No Root Partition"
msgstr "Ingen rotpartisjon"

#: ../textw/partition_text.py:1143
msgid "Must have a / partition to install on."
msgstr "Må ha en \"/\"-partisjon å installere på."

#: ../textw/partmethod_text.py:26
msgid "Autopartition"
msgstr "Autopartisjonering"

#: ../textw/partmethod_text.py:27
msgid "Disk Druid"
msgstr "Disk Druid"

#: ../textw/progress_text.py:79
msgid "Package Installation"
msgstr "Pakkeinstallasjon"

#: ../textw/progress_text.py:81
msgid " Name   : "
msgstr " Navn  : "

#: ../textw/progress_text.py:82
msgid " Size   : "
msgstr " Størr. : "

#: ../textw/progress_text.py:83
msgid " Summary: "
msgstr " Sammendrag: "

#: ../textw/progress_text.py:109
msgid "    Packages"
msgstr "      Pakker"

#: ../textw/progress_text.py:110
msgid "       Bytes"
msgstr "       Bytes"

#: ../textw/progress_text.py:111
msgid "        Time"
msgstr "         Tid"

#: ../textw/progress_text.py:113
msgid "Total    :"
msgstr "Total   :"

#: ../textw/progress_text.py:120
msgid "Completed:   "
msgstr "Ferdig  :"

#: ../textw/progress_text.py:130
msgid "Remaining:  "
msgstr "Gjenstår:   "

#: ../textw/silo_text.py:39 ../textw/silo_text.py:112
#: ../textw/silo_text.py:224
msgid "SILO Configuration"
msgstr "SILO-konfigurasjon"

#: ../textw/silo_text.py:77
msgid "Create PROM alias `linux'"
msgstr "Lag PROM-alias `linux'"

#: ../textw/silo_text.py:78
msgid "Set default PROM boot device"
msgstr "Sett standard PROM oppstartsenhet"

#: ../textw/silo_text.py:114
msgid "Where do you want to install the bootloader?"
msgstr "Hvor vil du installere oppstartslasteren?"

#: ../textw/silo_text.py:155
msgid "Edit Boot Label"
msgstr "Rediger oppstartsnavn"

#: ../textw/timezone_text.py:77
msgid "What time zone are you located in?"
msgstr "Hvilken tidssone befinner du deg i?"

#: ../textw/timezone_text.py:92
msgid "Hardware clock set to GMT?"
msgstr "Maskinvareklokken satt til GMT?"

#: ../textw/upgrade_bootloader_text.py:53
#: ../textw/upgrade_bootloader_text.py:60
msgid "Update boot loader configuration"
msgstr "Oppdater konfigurasjon av oppstartslaster"

#: ../textw/upgrade_bootloader_text.py:64
msgid "Skip boot loader updating"
msgstr "Hopp over oppdatering av oppstartslaster"

#: ../textw/upgrade_bootloader_text.py:66
msgid "Create new boot loader configuration"
msgstr "Lag ny konfigurasjon for oppstartslaster"

#: ../textw/upgrade_text.py:92
#, python-format
msgid ""
"The 2.4 kernel needs significantly more swap than older kernels, as much as "
"twice as much swap space as RAM on the system. You currently have %dMB of "
"swap configured, but you may create additional swap space on one of your "
"file systems now."
msgstr ""
"2.4-kjernen trenger vesentlig mer swap enn eldre kjerner, så mye som\n"
"det dobbelte av systemets RAM er anbefalt. Du har nå %d MB av swap "
"konfigurert,\n"
"men du kan opprette mer swap på et av dine filsystemer nå."

#: ../textw/upgrade_text.py:110
msgid "Free Space"
msgstr "Fri diskplass"

#: ../textw/upgrade_text.py:125
msgid "RAM detected (MB):"
msgstr "Gjenkjent RAM (MB):"

#: ../textw/upgrade_text.py:128
msgid "Suggested size (MB):"
msgstr "Anbefalt størrelse(MB):"

#: ../textw/upgrade_text.py:131
msgid "Swap file size (MB):"
msgstr "Størrelse på swapfil(MB):"

#: ../textw/upgrade_text.py:139
msgid "Add Swap"
msgstr "Legg til swap"

#: ../textw/upgrade_text.py:164
msgid "The value you entered is not a valid number."
msgstr "Størrelsen du oppgav er ikke et gyldig tall."

#: ../textw/upgrade_text.py:194
msgid "You don't have any Linux partitions. You can't upgrade this system!"
msgstr "Du har ingen Linux-partisjoner. Du kan ikke oppgradere dette systemet!"

#: ../textw/upgrade_text.py:211
msgid "System to Upgrade"
msgstr "System som skal oppgraderes"

#: ../textw/upgrade_text.py:225
msgid "Upgrade Partition"
msgstr "Oppgrader partisjon"

#: ../textw/upgrade_text.py:247
msgid "Customize Packages to Upgrade"
msgstr "Tilpass pakker som skal oppgraderes"

#: ../textw/upgrade_text.py:248
msgid ""
"The packages you have installed, and any other packages which are needed to "
"satisfy their dependencies, have been selected for installation. Would you "
"like to customize the set of packages that will be upgraded?"
msgstr ""
"Pakkene du har installert, og eventuelle andre pakker som er nødvendige for "
"å tilfredsstille deres avhengigheter, er valgt for installering. Ønsker du å "
"endre pakkesettet som skal oppgraderes?"

#: ../textw/userauth_text.py:22
msgid "Root Password"
msgstr "Root-passord"

#: ../textw/userauth_text.py:24
msgid ""
"Pick a root password. You must type it twice to ensure you know what it is "
"and didn't make a mistake in typing. Remember that the root password is a "
"critical part of system security!"
msgstr ""
"Velg et root-passord. Du må skrive det inn to ganger for å være sikker på at "
"du vet hva det er og at du ikke gjorde en skrivefeil. Husk at root-passordet "
"er kritisk for systemsikkerheten!"

#: ../textw/userauth_text.py:37 ../loader/urls.c:389
msgid "Password:"
msgstr "Passord:"

#: ../textw/userauth_text.py:38
msgid "Password (confirm):"
msgstr "Passord (bekreft):"

#: ../textw/userauth_text.py:54 ../textw/userauth_text.py:126
msgid "Password Length"
msgstr "Passordlengde"

#: ../textw/userauth_text.py:55
msgid "The root password must be at least 6 characters long."
msgstr "Root-passordet må være minst 6 tegn langt."

#: ../textw/userauth_text.py:59 ../textw/userauth_text.py:134
msgid "Password Mismatch"
msgstr "Passordene er ikke like"

#: ../textw/userauth_text.py:60 ../textw/userauth_text.py:135
msgid "The passwords you entered were different. Please try again."
msgstr "Passordene du skrev inn var forskjellige. Vennligst forsøk igjen."

#: ../textw/userauth_text.py:93
msgid "Add User"
msgstr "Legg til bruker"

#: ../textw/userauth_text.py:98
msgid "User Name"
msgstr "Brukernavn"

#: ../textw/userauth_text.py:99
msgid "Password"
msgstr "Passord"

#: ../textw/userauth_text.py:100
msgid "Password (confirm)"
msgstr "Passord (bekreft)"

#: ../textw/userauth_text.py:113
#, fuzzy
msgid "Bad User Name"
msgstr "Brukernavn"

#: ../textw/userauth_text.py:114
#, fuzzy
msgid "User names must contain only characters A-Z, a-z, and 0-9."
msgstr ""
"Bruker-IDer må være mindre enn 8 tegn og kan kun inneholde tegnene A-Z, a-z "
"og 0-9."

#: ../textw/userauth_text.py:121
#, fuzzy
msgid "Missing User Name"
msgstr "Manglende bruker-ID"

#: ../textw/userauth_text.py:122
#, fuzzy
msgid "You must provide a user name"
msgstr "Du må oppgi en bruker-ID"

#: ../textw/userauth_text.py:127
msgid "The password must be at least 6 characters long."
msgstr "Passordet må bestå av minst 6 tegn."

#: ../textw/userauth_text.py:143 ../textw/userauth_text.py:150
#: ../textw/userauth_text.py:158
msgid "User Exists"
msgstr "Brukeren eksisterer"

#: ../textw/userauth_text.py:144
msgid ""
"The root user is already configured. You don't need to add this user here."
msgstr ""
"Root-brukeren er allerede konfigurert. Du trenger ikke å legge til denne "
"brukeren her."

#: ../textw/userauth_text.py:151
#, fuzzy
msgid ""
"This system user is already configured. You don't need to add this user here."
msgstr ""
"Root-brukeren er allerede konfigurert. Du trenger ikke å legge til denne "
"brukeren her."

#: ../textw/userauth_text.py:159
msgid "This user id already exists.  Choose another."
msgstr "Denne brukeren eksisterer allerede. Velg en annen."

#: ../textw/userauth_text.py:186
msgid ""
"You should use a normal user account for most activities on your system. By "
"not using the root account casually, you'll reduce the chance of disrupting "
"your system's configuration."
msgstr ""
"Du bør bruke en vanlig brukerkonto for de fleste aktivitetene på systemet "
"ditt. Ved å ikke bruke root-kontoen reduserer du sjansene for å ødelegge "
"systemets konfigurasjon."

#: ../textw/userauth_text.py:197
msgid "User Account Setup"
msgstr "Oppsett av brukerkonto"

#: ../textw/userauth_text.py:199
#, fuzzy
msgid ""
"What other user accounts would you like to have on the system? You should "
"have at least one non-root account for normal work, but multi-user systems "
"can have any number of accounts set up."
msgstr ""
"Hvilken brukerkonto ønsker du å ha på systemet? Du bør ha minst en konto ved "
"siden av root for vanlig arbeid, men flerbrukersystemer kan ha mange kontoer "
"satt opp."

#: ../textw/userauth_text.py:210
msgid "User name"
msgstr "Brukernavn"

#: ../textw/userauth_text.py:224
msgid "Add"
msgstr "Legg til"

#: ../textw/userauth_text.py:237
msgid "Enter the information for the user."
msgstr "Skriv inn informasjon om brukeren."

#: ../textw/userauth_text.py:255
msgid "Change the information for this user."
msgstr "Endre informasjonen om denne brukeren."

#: ../textw/userauth_text.py:327
msgid "Use Shadow Passwords"
msgstr "Bruk skyggepassord"

#: ../textw/userauth_text.py:329
msgid "Enable MD5 Passwords"
msgstr "Bruk MD5-passord"

#: ../textw/userauth_text.py:334
msgid "Enable NIS"
msgstr "Bruk NIS"

#: ../textw/userauth_text.py:340
msgid "NIS Domain:"
msgstr "NIS-domene:"

#: ../textw/userauth_text.py:342
msgid "NIS Server:"
msgstr "NIS-tjener:"

#: ../textw/userauth_text.py:344
msgid "or use:"
msgstr "eller bruk:"

#: ../textw/userauth_text.py:347
msgid "Request server via broadcast"
msgstr "Forespør tjener via kringkasting"

#: ../textw/userauth_text.py:368
msgid "Enable LDAP"
msgstr "Bruk LDAP"

#: ../textw/userauth_text.py:374
msgid "LDAP Server:"
msgstr "LDAP-tjener:"

#: ../textw/userauth_text.py:376
msgid "LDAP Base DN:"
msgstr "LDAP basis DN:"

#: ../textw/userauth_text.py:386
msgid "Use TLS connections"
msgstr "Bruk TLS-tilkoblinger"

#: ../textw/userauth_text.py:397
msgid "Enable Kerberos"
msgstr "Bruk Kerberos"

#: ../textw/userauth_text.py:404
msgid "Realm:"
msgstr "Område:"

#: ../textw/userauth_text.py:406
msgid "KDC:"
msgstr "KDC:"

#: ../textw/userauth_text.py:408
msgid "Admin Server:"
msgstr "Admin-tjener:"

#: ../textw/welcome_text.py:22
#, python-format
msgid "%s"
msgstr "%s"

#: ../textw/welcome_text.py:23
#, python-format
msgid ""
"Welcome to %s!\n"
"\n"
"This installation process is outlined in detail in the Official %s "
"Installation Guide available from Red Hat, Inc. If you have access to this "
"manual, you should read the installation section before continuing.\n"
"\n"
"If you have purchased Official %s, be sure to register your purchase through "
"our web site, http://www.redhat.com/."
msgstr ""
"Velkommen til %s!\n"
"\n"
"Denne installasjonsprosessen er beskrevet i detalj i installeringsguiden\n"
"for %s som er tilgjengelig fra Red Hat, Inc. Hvis du har tilgang til denne\n"
"håndboken bør du lese delen om installering før du fortsetter.\n"
"\n"
"Hvis du har kjøpt Official %s bør du registrere kjøpet gjennom vårt "
"nettsted, http://www.redhat.com/."

#: ../textw/xconfig_text.py:31
msgid "Color Depth"
msgstr "Fargedybde"

#: ../textw/xconfig_text.py:32
msgid "Please select the color depth you would like to use:"
msgstr "Vennligst velg fargedybden du ønsker å bruke:"

#: ../textw/xconfig_text.py:50
msgid "Resolution"
msgstr "Oppløsning"

#: ../textw/xconfig_text.py:51
msgid "Please select the resolution you would like to use:"
msgstr "Vennligst velg oppløsningen du ønsker å bruke:"

#: ../textw/xconfig_text.py:180 ../textw/xconfig_text.py:189
#: ../loader/loader.c:914 ../loader/loader.c:1208 ../loader/loader.c:1211
#: ../loader/loader.c:1229 ../loader/loader.c:1237
msgid "Test"
msgstr "Test"

#: ../textw/xconfig_text.py:183
msgid "X Customization"
msgstr "Tilpassing av X"

#: ../textw/xconfig_text.py:186
#, python-format
msgid ""
"Select the color depth and video mode you want to use for your system. Use "
"the '%s' button to test the video mode."
msgstr ""
"Velg fargedybden og grafikkmodus du ønsker å bruke for ditt system. Bruk '%"
"s'-knappen for å teste grafikkmodus."

#: ../textw/xconfig_text.py:192
msgid "Color Depth:"
msgstr "Fargedybde:"

#: ../textw/xconfig_text.py:196 ../textw/xconfig_text.py:203
#: ../textw/xconfig_text.py:445 ../textw/xconfig_text.py:456
#: ../textw/xconfig_text.py:643 ../textw/xconfig_text.py:650
msgid "Change"
msgstr "Endre"

#: ../textw/xconfig_text.py:199
msgid "Resolution:"
msgstr "Oppløsning:"

#: ../textw/xconfig_text.py:209
msgid "Default Desktop:"
msgstr "Standard skrivebord:"

#: ../textw/xconfig_text.py:213 ../textw/xconfig_text.py:222
msgid "GNOME"
msgstr "GNOME"

#: ../textw/xconfig_text.py:215 ../textw/xconfig_text.py:224
msgid "KDE"
msgstr "KDE"

#: ../textw/xconfig_text.py:229
msgid "Default Login:"
msgstr "Standard pålogging:"

#: ../textw/xconfig_text.py:231
msgid "Graphical"
msgstr "Grafisk"

#: ../textw/xconfig_text.py:233
msgid "Text"
msgstr "Tekst"

#: ../textw/xconfig_text.py:280
msgid "Monitor"
msgstr "Skjerm"

#: ../textw/xconfig_text.py:281
msgid "Please select the monitor attached to your system."
msgstr "Vennligst velg skjermen som er koblet til ditt system."

#: ../textw/xconfig_text.py:305
msgid "Monitor Sync Rates"
msgstr "Synkroniseringsrater for skjerm"

#: ../textw/xconfig_text.py:310
msgid ""
"Please enter the sync rates for your monitor. \n"
"\n"
"NOTE - it is not usually necessary to edit sync rates manually, and care "
"should be taken to make sure the values entered are accurate."
msgstr ""
"Vennligst skriv inn synkroniseringsfrekvenser for din skjerm.\n"
"\n"
"MERK - det er ikke vanligvis nødvendig p redigere synkroniseringsfrekvenser "
"manuelt, og man bør forsikre seg om at verdiene som oppgis er korrekt."

#: ../textw/xconfig_text.py:315
msgid "HSync Rate: "
msgstr "HSync frekvens: "

#: ../textw/xconfig_text.py:320
msgid "VSync Rate: "
msgstr "VSync frekvens: "

#: ../textw/xconfig_text.py:344
msgid "horizontal"
msgstr "horisontal"

#: ../textw/xconfig_text.py:347
msgid "vertical"
msgstr "vertikal"

#: ../textw/xconfig_text.py:356
msgid "Invalid Sync Rates"
msgstr "Ugyldig synkroniseringsfrekvens"

#: ../textw/xconfig_text.py:357
#, python-format
msgid ""
"The %s sync rate is invalid:\n"
"\n"
"      %s\n"
"\n"
"A valid sync rate can be of the form:\n"
"\n"
"      31.5                   a single number\n"
"    50.1-90.2                a range of numbers\n"
"31.5,35.0,39.3-40.0          a list of numbers/ranges\n"
msgstr ""
"%s-synkroniseringsfrekvenser er ugyldig:\n"
"\n"
"      %s\n"
"\n"
"En gyldig synkroniseringsfrekvens skal være på formen:\n"
"\n"
"      31.5                   ett enkelt tall\n"
"    50.1-90.2                et tallområde\n"
"31.5,35.0,39.3-40.0          en liste med tall/områder\n"

#: ../textw/xconfig_text.py:437
#, python-format
msgid ""
"Select the monitor for your system.  Use the '%s' button to reset to the "
"probed values."
msgstr ""
"Velg skjermen for ditt system. Bruk '%s'-knappen for å gå tilbake til "
"verdiene fra autosøk."

#: ../textw/xconfig_text.py:441
msgid "Monitor:"
msgstr "Skjerm:"

#: ../textw/xconfig_text.py:448
msgid "HSync Rate:"
msgstr "Hsync frekvens:"

#: ../textw/xconfig_text.py:458
msgid "VSync Rate:"
msgstr "VSync frekvens:"

#: ../textw/xconfig_text.py:534
msgid "Video Card"
msgstr "Skjermkort"

#: ../textw/xconfig_text.py:535
#, python-format
msgid ""
"Please select the video card present in your system.  Choose '%s' to reset "
"the selection to the card the installer detected in your system."
msgstr ""
"Vennligst velg skjermkort for ditt system. Velg '%s' for å gå tilbake til "
"valget installasjonsprogrammet fant for ditt system."

#: ../textw/xconfig_text.py:553
msgid "Video RAM"
msgstr "Video-RAM"

#: ../textw/xconfig_text.py:554
#, python-format
msgid ""
"Please select the amount of video RAM present on your video card. Choose '%"
"s' to reset the selection to the amount the installer detected on your card."
msgstr ""
"Vennligst velg mengden video-RAM som finnes på ditt skjermkort. Velg '%s' "
"for å gå tilbake til mengden installasjonsprogrammet fant på ditt kort."

#: ../textw/xconfig_text.py:624
msgid "Skip X Configuration"
msgstr "Hopp over konfigurasjon av X"

#: ../textw/xconfig_text.py:627
msgid "Video Card Configuration"
msgstr "Konfigurasjon av skjermkort"

#: ../textw/xconfig_text.py:630
msgid "Select the video card and video RAM for your system."
msgstr "Velg skjermkort og video-RAM for ditt system."

#: ../textw/xconfig_text.py:633
msgid "Video Card:"
msgstr "Skjermkort:"

#: ../textw/xconfig_text.py:638
msgid "Unknown card"
msgstr "Ukjent kort"

#: ../textw/xconfig_text.py:646
msgid "Video RAM:"
msgstr "Video-RAM:"

#: ../textw/zipl_text.py:50
#, fuzzy
msgid "z/IPL Configuration"
msgstr "SILO-konfigurasjon"

#: ../installclasses/custom.py:10
msgid "Custom"
msgstr "Tilpasset"

#: ../installclasses/laptop.py:7
msgid "Laptop"
msgstr "Bærbar"

#: ../installclasses/server.py:10
msgid "Server"
msgstr "Tjener"

#: ../installclasses/upgradeclass.py:8
msgid "Upgrade Existing System"
msgstr "Oppgrader eksisterende system"

#: ../installclasses/upgradeclass.py:12
msgid "Upgrade"
msgstr "Oppgrader"

#: ../installclasses/workstation.py:10
msgid "Workstation"
msgstr "Arbeidsstasjon"

#: ../loader/cdrom.c:31
msgid "CDROM type"
msgstr "CD-ROM-type"

#: ../loader/cdrom.c:31
msgid "What type of CDROM do you have?"
msgstr "Hvilken type CD-ROM har du?"

#: ../loader/cdrom.c:88
msgid "Initializing CDROM..."
msgstr "Initierer CD-ROM..."

#: ../loader/devices.c:79
msgid "Miscellaneous"
msgstr "Forskjellig"

#: ../loader/devices.c:88
msgid ""
"This module can take parameters which affects its operation. If you don't "
"know what parameters to supply, just skip this screen by pressing the \"OK\" "
"button now."
msgstr ""
"Denne modulen kan ta parametere som har innvirkning på måten den virker. "
"Hvis du ikke vet hvilke parametere du skal oppgi, kan du hoppe over denne "
"skjermen ved å trykke \"OK\"-knappen nå."

#: ../loader/devices.c:93
msgid "Module Parameters"
msgstr "Parametere for moduler"

#: ../loader/devices.c:232 ../loader/devices.c:239 ../loader/devices.c:357
#: ../loader/loader.c:328 ../loader/loader.c:389 ../loader/loader.c:405
msgid "Devices"
msgstr "Enheter"

#: ../loader/devices.c:234
msgid "Do you have a driver disk?"
msgstr "Har du en driverdisk?"

#: ../loader/devices.c:241
msgid "Insert your driver disk and press \"OK\" to continue."
msgstr "Sett inn driverdisketten og trykk \"OK\" for å fortsette."

#: ../loader/devices.c:259
msgid "Failed to mount driver disk."
msgstr "Kunne ikke montere driverdisketten."

#: ../loader/devices.c:266
#, c-format
msgid ""
"The floppy disk you inserted is not a valid driver disk for this release of %"
"s."
msgstr ""
"Disketten du satte inn er ikke en gyldig driverdiskett for denne utgaven av %"
"s."

#: ../loader/devices.c:326
msgid ""
"Which driver should I try?. If the driver you need does not appear in this "
"list, and you have a separate driver disk, please press F2."
msgstr ""
"Hvilken driver skal jeg forsøke? Hvis driveren du trenger ikke finnes på "
"denne listen, og du har en separat driverdiskett, vennligst trykk F2."

#: ../loader/devices.c:335
msgid "Specify module parameters"
msgstr "Spesifiser parametere for modul"

#: ../loader/devices.c:429
#, c-format
msgid "Failed to insert %s module."
msgstr "Klarte ikke å laste %s-modul."

#: ../loader/kickstart.c:59 ../loader/kickstart.c:69 ../loader/kickstart.c:108
msgid "Kickstart Error"
msgstr "Kickstart-feil"

#: ../loader/kickstart.c:60
#, c-format
msgid "Error opening: kickstart file %s: %s"
msgstr "Feil under åpning: kickstart-fil %s: %s"

#: ../loader/kickstart.c:70
#, c-format
msgid "Error reading contents of kickstart file %s: %s"
msgstr "Feil under lesing av innholdet i kickstart-fil %s: %s"

#: ../loader/kickstart.c:109
#, c-format
msgid "Error on line %d of kickstart file %s."
msgstr "Feil på linje %d i kickstart-fil %s."

#: ../loader/lang.c:41 ../loader/loader.c:199
#, c-format
msgid "Welcome to %s"
msgstr "Velkommen til %s"

#: ../loader/lang.c:42 ../loader/loader.c:205
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"  <Tab>/Alt-Tab> mellom elementer  | <Mellomrom> velger | <F12> neste skjerm "

#: ../loader/lang.c:305
msgid "Choose a Language"
msgstr "Velg et språk"

#: ../loader/lang.c:632
msgid "Keyboard Type"
msgstr "Tastaturtype"

#: ../loader/lang.c:633
msgid "What type of keyboard do you have?"
msgstr "Hvilken type tastatur har du?"

#: ../loader/loader.c:135
msgid "Local CDROM"
msgstr "Lokal CD-ROM"

#: ../loader/loader.c:138
msgid "NFS image"
msgstr "NFS-bilde"

#: ../loader/loader.c:143
msgid "Hard drive"
msgstr "Harddisk"

#: ../loader/loader.c:315
msgid "SCSI"
msgstr "SCSI"

#: ../loader/loader.c:315
msgid "Network"
msgstr "Nettverk"

#: ../loader/loader.c:329
msgid "What kind of device would you like to add"
msgstr "Hvilken enhet ønsker du å legge til?"

#: ../loader/loader.c:378
msgid "The following devices have been found on your system:"
msgstr "Følgende typer enheter er funnet på ditt system:"

#: ../loader/loader.c:380 ../loader/loader.c:405
msgid "Done"
msgstr "Ferdig"

#: ../loader/loader.c:380 ../loader/loader.c:405
msgid "Add Device"
msgstr "Legg til enhet"

#: ../loader/loader.c:406
msgid ""
"No special device drivers have been loaded for your system. Would you like "
"to load any now?"
msgstr ""
"Ingen spesielle enhetsdrivere er lastet for ditt system. Ønsker du å gjøre "
"dette nå?"

#: ../loader/loader.c:489 ../loader/loader.c:894 ../loader/loader.c:2802
#, c-format
msgid "Failed to read directory %s: %s"
msgstr "Kunne ikke lese katalog %s: %s"

#: ../loader/loader.c:595
msgid ""
"An error occurred reading the install from the ISO images. Please check your "
"ISO images and try again."
msgstr ""
"En feil oppstod ved lesing fra ISO-filene. Sjekk ISO-filene og prøv på nytt."

#: ../loader/loader.c:911
#, c-format
msgid ""
"Would you like to perform a checksum test of the ISO image:\n"
"\n"
"   %s?"
msgstr ""
"Ønsker du å teste sjekksummen av ISO-filen:\n"
"\n"
"   %s?"

#: ../loader/loader.c:914
msgid "Checksum Test"
msgstr "Test av sjekksum:"

#: ../loader/loader.c:1025
msgid ""
"You don't seem to have any hard drives on your system! Would you like to "
"configure additional devices?"
msgstr ""
"Det ser ikke ut som om du har noen harddisker på systemet ditt! Ønsker du å "
"konfigurere noen tilleggsenheter?"

#: ../loader/loader.c:1070
#, c-format
msgid ""
"What partition and directory on that partition hold the CD (iso9660) images "
"for %s? If you don't see the disk drive you're using listed here, press F2 "
"to configure additional devices."
msgstr ""
"Hvilken partisjon og hvilken katalog på denne partisjonen inneholder CD-"
"filene (iso9660) for %s? Hvis du ikke ser disken du bruker på denne listen, "
"trykk F2 for å konfigurere tilleggsenheter."

#: ../loader/loader.c:1086
msgid "Directory holding images:"
msgstr "Katalog som inneholder bilder:"

#: ../loader/loader.c:1106
msgid "Select Partition"
msgstr "Velg partisjon"

#: ../loader/loader.c:1158
#, c-format
msgid "Device %s does not appear to contain Red Hat CDROM images."
msgstr "Enheten %s ser ikke ut til å inneholde et Red Hat CDROM-bilde."

#: ../loader/loader.c:1208 ../loader/loader.c:1229 ../loader/mediacheck.c:209
msgid "Media Check"
msgstr "Mediasjekk"

#: ../loader/loader.c:1208 ../loader/loader.c:1212
msgid "Eject CD"
msgstr "Løs ut CD"

#: ../loader/loader.c:1209
#, c-format
msgid ""
"Choose \"%s\" to test the CD currently in the drive, or \"%s\" to eject the "
"CD and insert another for testing."
msgstr ""
"Velg \"%s\" for å teste CDen som er i CD-stasjonen, eller \"%s\" for å bytte "
"CD."

#: ../loader/loader.c:1230
#, c-format
msgid ""
"If you would like to test additional media, insert the next CD and press \"%s"
"\". You do not have to test all CDs, although it is recommended you do so at "
"least once.\n"
"\n"
"To begin the installation process insert CD #1 into the drive and press \"%s"
"\"."
msgstr ""
"Hvis du ønsker å teste flere installeringsmedia, sett inn neste CD og trykk "
"\"%s\". Du trenger ikke teste alle CDene, selv om det er anbefalt at du gjør "
"dette ihvertfall første gangen du bruker dem.\n"
"\n"
"For å fortsette installeringsprosessen sett inn CD #1 i CD-ROM-stasjonen og "
"trykk \"%s\"."

#: ../loader/loader.c:1251 ../loader/loader.c:1365
#, c-format
msgid ""
"The %s CD was not found in any of your CDROM drives. Please insert the %s CD "
"and press %s to retry."
msgstr ""
"%s CDen ble ikke funnet i noen av dine CD-ROM-stasjoner. Sett inn %s CDen og "
"press %s for å forsøke på nytt"

#: ../loader/loader.c:1294
msgid "CD Found"
msgstr "CD funnet"

#: ../loader/loader.c:1296
#, c-format
msgid ""
"To begin testing the CD media before installation press %s.\n"
"\n"
"Choose %s to skip the media test and start the installation."
msgstr ""
"For å starte testing av CDer før installeringen trykk %s.\n"
"\n"
"Velg %s for å hoppe over denne testen og starte installeringen."

#: ../loader/loader.c:1461
msgid "Networking Device"
msgstr "Nettverksenhet"

#: ../loader/loader.c:1462
msgid ""
"You have multiple network devices on this system. Which would you like to "
"install through?"
msgstr ""
"Du har flere nettverksenheter på dette systemet. Hvilken enhet skal du bruke "
"for installasjonen?"

#: ../loader/loader.c:1579
msgid "That directory does not seem to contain a Red Hat installation tree."
msgstr "Den katalogen ser ikke ut til å inneholde et Red Hat installasjonstre."

#: ../loader/loader.c:1584
msgid "That directory could not be mounted from the server"
msgstr "Kunne ikke montere denne katalogen fra den oppgitte tjeneren"

#: ../loader/loader.c:1626
#, c-format
msgid "File %s/%s not found on server."
msgstr "Filen %s/%s ble ikke funnet på tjeneren."

#: ../loader/loader.c:1664
msgid "HTTP"
msgstr "HTTP"

#: ../loader/loader.c:1665
msgid "Unable to retrieve the first install image"
msgstr "Kunne ikke finne første installasjonsbilde"

#: ../loader/loader.c:1726
msgid "FTP and HTTP installs require 20MB or more of system memory."
msgstr "FTP og HTTP-installasjoner krever 20MB eller mer systemminne."

#: ../loader/loader.c:1966
msgid "Rescue Method"
msgstr "Redningsmetode"

#: ../loader/loader.c:1967
msgid "Installation Method"
msgstr "Installasjonsmetode"

#: ../loader/loader.c:1969
msgid "What type of media contains the rescue image?"
msgstr "Hvilken type media inneholder redningsbildet?"

#: ../loader/loader.c:1971
msgid "What type of media contains the packages to be installed?"
msgstr "Hvilken type media inneholder pakkene som skal installeres?"

#: ../loader/loader.c:2772
msgid "Cannot find ks.cfg on boot floppy."
msgstr "Kan ikke finne ks.cfg på oppstartsdisketten."

#: ../loader/loader.c:2864
msgid "Updates Disk"
msgstr "Oppdateringsdiskett"

#: ../loader/loader.c:2865
msgid "Insert your updates disk and press \"OK\" to continue."
msgstr "Sett inn oppdateringsdisketten og trykk \"OK\" for å fortsette."

#: ../loader/loader.c:2870
#, c-format
msgid ""
"The floppy disk you inserted is not a valid update disk for this release of %"
"s."
msgstr ""
"Disketten du satte inn er ikke en gyldig oppdateringsdiskett for denne "
"utgaven av %s."

#: ../loader/loader.c:2880
msgid "Failed to mount floppy disk."
msgstr "Kunne ikke montere disketten."

#: ../loader/loader.c:2885
msgid "Updates"
msgstr "Oppdateringer"

#: ../loader/loader.c:2885
msgid "Reading anaconda updates..."
msgstr "Leser anaconda-oppdateringer..."

#: ../loader/loader.c:3099
#, c-format
msgid "You do not have enough RAM to install %s on this machine."
msgstr "Du har ikke nok RAM til å installere %s på denne maskinen."

#: ../loader/loader.c:3135
msgid ""
"The second stage of the install which you have selected does not match the "
"boot disk which you are using.  This shouldn't happen, and I'm rebooting "
"your system now."
msgstr ""
"Andre del av installeringsprogrammet er ikke det samme som delen på "
"oppstartsdisketten du bruker. Dette skal ikke skje, og systemet vil nå "
"starte på nytt."

#: ../loader/loader.c:3530
msgid ""
"No hard drives have been found. You probably need to manually choose device "
"drivers for the installation to succeed. Would you like to select drivers "
"now?"
msgstr ""
"Ingen harddisker er funnet. Du er sannsynligvis nødt til å velge en driver "
"for å kunne fortsette installeringen. Hvis du velge driver nå?"

#: ../loader/loader.c:3702
msgid "Running anaconda - please wait...\n"
msgstr "Kjører anaconda - snart tilbake...\n"

#: ../loader/mediacheck.c:193
msgid ""
"Unable to read the disc checksum from the primary volume descriptor.  This "
"probably means the disc was created without adding the checksum."
msgstr ""
"Klarte ikke å lese CDens sjekksum fra primær volum-beskrivelse. Dette betyr "
"sannsynligvis at at CDen ble laget uten å legge til sjekksum."

#: ../loader/mediacheck.c:201
#, c-format
msgid "Checking \"%s\"..."
msgstr "Kontrollerer %s..."

#: ../loader/mediacheck.c:203
msgid "Checking media now..."
msgstr "Sjekker medium nå..."

#: ../loader/mediacheck.c:248
#, c-format
msgid "Unable to find install image %s"
msgstr "Fant ikke installasjonsbilde %s"

#: ../loader/mediacheck.c:261
msgid ""
"FAIL.\n"
"\n"
"It is not recommended to use this media."
msgstr ""
"FEIL.\n"
"\n"
"Det anbefales å ikke bruke dette mediet."

#: ../loader/mediacheck.c:263
msgid ""
"PASS.\n"
"\n"
"It is OK to install from this media."
msgstr ""
"OK.\n"
"\n"
"Det er ok å installere fra dette mediet."

#: ../loader/mediacheck.c:265
msgid ""
"NA.\n"
"\n"
"No checksum information available, unable to verify media."
msgstr ""
"N/A.\n"
"\n"
"Ingen sjekksum tilgjengelig, kunne ikke kontrollere medium."

#: ../loader/mediacheck.c:267
msgid "Media Check Result"
msgstr "Resultat av mediasjekk"

#: ../loader/mediacheck.c:271
#, c-format
msgid ""
"of the image:\n"
"\n"
"%s\n"
"\n"
msgstr ""
"av filen:\n"
"\n"
"%s\n"
"\n"

#: ../loader/mediacheck.c:275
#, c-format
msgid "The media check %sis complete, and the result is: %s\n"
msgstr "Mediasjekken av %s er ferdig, og resultatet er: %s\n"

#: ../loader/modules.c:390
#, c-format
msgid "Failed to mount driver disk: %s."
msgstr "Montering av driverdisketten feilet: %s."

#: ../loader/modules.c:410
msgid "The wrong diskette was inserted."
msgstr "Feil diskett ble satt inn."

#: ../loader/modules.c:423
msgid "Loading"
msgstr "Laster"

#: ../loader/modules.c:423 ../loader/windows.c:47
#, c-format
msgid "Loading %s driver..."
msgstr "Laster driver %s..."

#: ../loader/modules.c:442
msgid "Driver Disk"
msgstr "Driverdisk"

#: ../loader/modules.c:443
#, c-format
msgid "Please insert the %s driver disk now."
msgstr "Vennligst sett inn %s-driverdisketten nå."

#: ../loader/net.c:62
#, c-format
msgid ""
"Please enter the following information:\n"
"\n"
"    o the name or IP number of your %s server\n"
"    o the directory on that server containing\n"
"      %s for your architecture\n"
msgstr ""
"Skriv inn følgende informasjon:\n"
"\n"
"    o navnet eller IP-adressen til din %s-tjener\n"
"    o katalogen på den tjeneren som inneholder\n"
"      %s for din arkitektur\n"

#: ../loader/net.c:176
msgid "NFS server name:"
msgstr "Navn på NFS-tjener:"

#: ../loader/net.c:179 ../loader/urls.c:226
msgid "Red Hat directory:"
msgstr "Red Hat-katalog:"

#: ../loader/net.c:185
msgid "NFS Setup"
msgstr "NFS-oppsett"

#: ../loader/net.c:259
msgid "Nameserver IP"
msgstr "Navnetjeners IP-adresse"

#: ../loader/net.c:263 ../loader/net.c:813
msgid "Nameserver"
msgstr "Navnetjener"

#: ../loader/net.c:264
msgid ""
"Your dynamic IP request returned IP configuration information, but it did "
"not include a DNS nameserver. If you know what your nameserver is, please "
"enter it now. If you don't have this information, you can leave this field "
"blank and the install will continue."
msgstr ""
"Din forespørsel om dynamisk IP returnerte informasjon om IP-konfigurasjon, "
"men den inkluderte ikke en DNS-navnetjener. Hvis du har informasjon om din "
"navnetjener, skriv den inn nå. Hvis du ikke har denne informasjonen kan du "
"la dette feltet stå tomt og installasjonen vil fortsette."

#: ../loader/net.c:274
msgid "Invalid IP Information"
msgstr "Ugyldig IP-informasjon"

#: ../loader/net.c:275
msgid "You entered an invalid IP address."
msgstr "Du skrev inn en ugyldig IP-adresse."

#: ../loader/net.c:299
msgid ""
"Please enter the IP configuration for this machine. Each item should be "
"entered as an IP address in dotted-decimal notation (for example, 1.2.3.4)."
msgstr ""
"Vær snill og skriv inn IP-konfigurasjonen for denne maskinen. Hver oppføring "
"skal skrives inn som en IP-adresse i punktdelt desimal notasjon (f.eks, "
"1.2.3.4)."

#: ../loader/net.c:341
msgid "Use dynamic IP configuration (BOOTP/DHCP)"
msgstr "Bruk dynamisk konfigurasjon av IP (BOOTP/DHCP)"

#: ../loader/net.c:369
msgid "Configure TCP/IP"
msgstr "Konfigurer TCP/IP"

#: ../loader/net.c:400
msgid "Missing Information"
msgstr "Manglende informasjon"

#: ../loader/net.c:401
msgid "You must enter both a valid IP address and a netmask."
msgstr "Du må skrive inn både en gyldig IP-adresse og en nettmaske."

#: ../loader/net.c:409 ../loader/net.c:746
msgid "Dynamic IP"
msgstr "Dynamisk IP"

#: ../loader/net.c:410 ../loader/net.c:747
msgid "Sending request for IP information..."
msgstr "Sender forespørsel om IP-informasjon..."

#: ../loader/net.c:623
msgid "Determining host name and domain..."
msgstr "Undersøker vertsnavn og domene..."

#: ../loader/net.c:730 ../loader/net.c:763
msgid "kickstart"
msgstr "kickstart"

#: ../loader/net.c:731
#, c-format
msgid "bad argument to kickstart network command %s: %s"
msgstr "ugyldig argument til nettverks-kommando for kickstart %s: %s"

#: ../loader/net.c:764
#, c-format
msgid "Bad bootproto %s specified in network command"
msgstr "Ugyldig bootproto %s spesifisert i nettverkskommandoen"

#: ../loader/net.c:807
msgid "Boot protocol to use"
msgstr "Oppstartsprotokoll som skal brukes"

#: ../loader/net.c:809
msgid "Network gateway"
msgstr "Nettverkets gateway"

#: ../loader/net.c:811
msgid "IP address"
msgstr "IP-adresse"

#: ../loader/net.c:815
msgid "Netmask"
msgstr "Nettmaske"

#: ../loader/net.c:820
msgid "Domain name"
msgstr "Domenenavn"

#: ../loader/net.c:823
msgid "Network device"
msgstr "Nettverksenhet"

#: ../loader/net.c:826
#, fuzzy
msgid "No DNS lookups"
msgstr "Bruk TLS-oppslag"

#: ../loader/net.c:898
msgid ""
" <Tab>/<Alt-Tab> between elements   |   <Space> selects  |   <F12> next "
"screen"
msgstr ""
"  <Tab>/Alt-Tab> mellom elementer   | <Mellomrom> velger | <F12> neste "
"skjerm "

#: ../loader/net.c:899
#, c-format
msgid "netconfig %s  (C) 1999 Red Hat, Inc."
msgstr "netconfig %s  (C) 1999 Red Hat, Inc."

#: ../loader/net.c:901
msgid "Network configuration"
msgstr "Nettverkskonfigurasjon"

#: ../loader/net.c:902
msgid "Would you like to set up networking?"
msgstr "Vil du sette opp nettverk?"

#: ../loader/pcmcia.c:35
msgid "PC Card"
msgstr "PC-kort"

#: ../loader/pcmcia.c:36
msgid "Initializing PC Card Devices..."
msgstr "Initierer enheter på PC-kort..."

#: ../loader/pcmcia.c:104
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../loader/pcmcia.c:105
msgid "Please insert your PCMCIA driver disk into your floppy drive now."
msgstr "Vennligst sett inn PCMCIA-driverdisketten i diskettstasjonen nå."

#: ../loader/pcmcia.c:114
msgid "Failed to mount disk."
msgstr "Kunne ikke montere disken."

#: ../loader/pcmcia.c:132
msgid "That floppy does not look like a Red Hat PCMCIA driver disk."
msgstr "Den disketten ser ikke ut til å være en PCMCIA driverdisk."

#: ../loader/telnetd.c:64
msgid "Waiting for telnet connection..."
msgstr "Venter på telnet-forbindelse..."

#: ../loader/telnetd.c:106
msgid "Running anaconda via telnet..."
msgstr "Kjører anaconda via telnet..."

#: ../loader/urls.c:82
#, c-format
msgid "Failed to log into %s: %s"
msgstr "Klarte ikke logge inn på %s: %s"

#: ../loader/urls.c:92 ../loader/urls.c:100
#, c-format
msgid "Failed to retrieve %s: %s"
msgstr "Klarte ikke å hente %s: %s"

#: ../loader/urls.c:105
msgid "Retrieving"
msgstr "Henter"

#: ../loader/urls.c:222
msgid "FTP site name:"
msgstr "Navn på FTP-område:"

#: ../loader/urls.c:223
msgid "Web site name:"
msgstr "Navn på WWW-område:"

#: ../loader/urls.c:241
msgid "Use non-anonymous ftp"
msgstr "Bruk ikke-anonym ftp"

#: ../loader/urls.c:246
msgid "Use proxy server"
msgstr "Bruk proxytjener"

#: ../loader/urls.c:258
msgid "FTP Setup"
msgstr "FTP-oppsett"

#: ../loader/urls.c:259
msgid "HTTP Setup"
msgstr "HTTP-oppsett"

#: ../loader/urls.c:269
msgid "You must enter a server name."
msgstr "Du må skrive inn et tjenernavn."

#: ../loader/urls.c:274
msgid "You must enter a directory."
msgstr "Du må skrive inn en katalog."

#: ../loader/urls.c:279
msgid "Unknown Host"
msgstr "Ukjent vert"

#: ../loader/urls.c:280
#, c-format
msgid "%s is not a valid hostname."
msgstr "%s er ikke et gyldig vertsnavn."

#: ../loader/urls.c:360
msgid ""
"If you are using non anonymous ftp, enter the account name and password you "
"wish to use below."
msgstr ""
"Hvis du bruker ikke-anonym ftp, skriv inn kontonavnet og passordet du ønsker "
"å bruke under. Hvis du bruker en FTP-proxy, skriv inn navnet til FTP-"
"proxytjeneren som skal brukes."

#: ../loader/urls.c:365
msgid ""
"If you are using a HTTP proxy server enter the name of the HTTP proxy server "
"to use."
msgstr ""
"Hvis du bruker en HTTP-proxytjener, skriv inn navnet til HTTP-proxytjeneren "
"som skal brukes."

#: ../loader/urls.c:386
msgid "Account name:"
msgstr "Kontonavn:"

#: ../loader/urls.c:395
msgid "FTP Proxy:"
msgstr "FTP-proxy:"

#: ../loader/urls.c:396
msgid "HTTP Proxy:"
msgstr "HTTP-proxy:"

#: ../loader/urls.c:400
msgid "FTP Proxy Port:"
msgstr "FTP-proxy-port:"

#: ../loader/urls.c:401
msgid "HTTP Proxy Port:"
msgstr "HTTP-proxy-port:"

#: ../loader/windows.c:46
msgid "Loading SCSI driver"
msgstr "Laster SCSI-driver..."

msgid "Base"
msgstr "Basis"

msgid "Printing Support"
msgstr "Støtte for utskrift"

msgid "Classic X Window System"
msgstr "Klassisk X-vindussystem"

msgid "X Window System"
msgstr "X vindussystem"

msgid "Laptop Support"
msgstr "Støtte for bærbare"

msgid "Sound and Multimedia Support"
msgstr "Lyd- og multimediastøtte"

msgid "Network Support"
msgstr "Støtte for nettverk"

msgid "Dialup Support"
msgstr "Støtte for ekstern pålogging"

# ../comps/comps-master:577
msgid "Messaging and Web Tools"
msgstr "Meldinger og web-verktøy"

msgid "Graphics and Image Manipulation"
msgstr "Grafikk- og bildemanipulasjon"

msgid "News Server"
msgstr "Nyhetstjener"

msgid "NFS File Server"
msgstr "NFS filtjener"

msgid "Windows File Server"
msgstr "Windows tiltjener"

msgid "Anonymous FTP Server"
msgstr "Anonym FTP-tjener"

msgid "SQL Database Server"
msgstr "SQL databasetjener"

msgid "Web Server"
msgstr "Web-tjener"

msgid "Router / Firewall"
msgstr "Ruter / brannvegg"

msgid "DNS Name Server"
msgstr "DNS navnetjener"

msgid "Network Managed Workstation"
msgstr "Nettverksadministrert arbeidsstasjon"

msgid "Authoring and Publishing"
msgstr "Skriving og publisering"

msgid "Emacs"
msgstr "Emacs"

msgid "Utilities"
msgstr "Verktøy"

msgid "Legacy Application Support"
msgstr "Støtte for eldre applikasjoner"

msgid "Software Development"
msgstr "Programvareutvikling"

msgid "Kernel Development"
msgstr "Kjerneutvikling"

# ../comps/comps-master:1055
msgid "Windows Compatibility / Interoperability"
msgstr "Windows kompatibilitet / interoperabilitet"

# ../comps/comps-master:1073
msgid "Games and Entertainment"
msgstr "Spill og underholdning"

#. generated from zone.tab
msgid "Acre"
msgstr "Acre"

#. generated from zone.tab
msgid "Alagoas, Sergipe"
msgstr "Alagoas, Sergipe"

#. generated from zone.tab
msgid "Alaska Time"
msgstr "Alaska-tid"

#. generated from zone.tab
msgid "Alaska Time - Alaska panhandle"
msgstr "Alaska-tid - \"Alaska panhandle\""

#. generated from zone.tab
msgid "Alaska Time - Alaska panhandle neck"
msgstr "Alaska-tid - \"Alaska panhandle neck\""

#. generated from zone.tab
msgid "Alaska Time - west Alaska"
msgstr "Alaska-tid - vest-Alaska"

#. generated from zone.tab
msgid "Aleutian Islands"
msgstr "de Aleutiske øyer"

#. generated from zone.tab
msgid "Amapa, E Para"
msgstr "Amapa, østre Para"

#. generated from zone.tab
msgid "Amundsen-Scott Station, South Pole"
msgstr "Amundsen-Scott-basen, Sydpolen"

#. generated from zone.tab
msgid "Aqtobe (Aktobe)"
msgstr "Aqtobe (Aktobe)"

#. generated from zone.tab
msgid "Atlantic islands"
msgstr "Atlanterhavsøyene"

#. generated from zone.tab
msgid "Atlantic Time - E Labrador"
msgstr "\"Atlantic Time\" - østre Labrador"

#. generated from zone.tab
msgid ""
"Atlantic Time - Nova Scotia (most places), NB, W Labrador, E Quebec & PEI"
msgstr ""
"\"Atlantic Time\" - de fleste steder i Nova Scotia, NB, vest-Labrador, øst-"
"Quebec og PEI"

#. generated from zone.tab
msgid "Atlantic Time - Nova Scotia - places that did not observe DST 1966-1971"
msgstr ""
"\"Atlantisk Tid\" - steder i Nova Scotia som ikke hadde sommertid i 1966-1971"

#. generated from zone.tab
msgid "Atyrau (Atirau, Gur'yev), Mangghystau (Mankistau)"
msgstr "Atyrau (Atirau, Gur'yev), Mangghystau (Mankistau)"

#. generated from zone.tab
msgid "Azores"
msgstr "Azorene"

#. generated from zone.tab
msgid "Bayan-Olgiy, Govi-Altai, Hovd, Uvs, Zavkhan"
msgstr "Bayan-Olgiy, Govi-Altai, Hovd, Uvs, Zavkhan"

#. generated from zone.tab
msgid "Canary Islands"
msgstr "Kanariøyene"

#. generated from zone.tab
msgid "Casey Station, Bailey Peninsula"
msgstr "Casey-stasjonen, Bailey-halvøyen"

#. generated from zone.tab
msgid "Catamarca (CT)"
msgstr "Catamarca (CT)"

#. generated from zone.tab
msgid "central China - Gansu, Guizhou, Sichuan, Yunnan, etc."
msgstr "midt-Kina - Gansu, Guizhou, Sichuan, Yunnan, etc."

#. generated from zone.tab
msgid "central Crimea"
msgstr "sentrale Krim"

#. generated from zone.tab
msgid "Central Standard Time - Saskatchewan - midwest"
msgstr "\"Central Standard Time\" - Saskatchewan - midtvesten"

#. generated from zone.tab
msgid "Central Standard Time - Saskatchewan - most locations"
msgstr "Central Standard Time - de fleste steder i Saskatchewan"

#. generated from zone.tab
msgid "Central Time"
msgstr "\"Central Time\""

#. generated from zone.tab
msgid "Central Time - Campeche, Yucatan"
msgstr "\"Central Time\" - Campeche, Yucatan"

#. generated from zone.tab
msgid "Central Time - Coahuila, Durango, Nuevo Leon, Tamaulipas"
msgstr "\"Central Time\" - Coahuila, Durango, Nuevo Leon, Tamaulipas"

#. generated from zone.tab
msgid "Central Time - Manitoba & west Ontario"
msgstr "\"Central Time\" - Manitoba og vest-Ontario"

#. generated from zone.tab
msgid "Central Time - Michigan - Wisconsin border"
msgstr "\"Central Time\" - Michigan - grensen mot Wisconsin"

#. generated from zone.tab
msgid "Central Time - most locations"
msgstr "De fleste steder med \"Central Time\""

#. generated from zone.tab
msgid "Central Time - North Dakota - Oliver County"
msgstr "\"Central Time\" - Nord-Dakota, Oliver County"

#. generated from zone.tab
msgid "Central Time - Quintana Roo"
msgstr "\"Central Time\" - Quintana Roo"

#. generated from zone.tab
msgid "Central Time - Rainy River & Fort Frances, Ontario"
msgstr "\"Central Time\" - Rainy River og Fort Frances, Ontario"

#. generated from zone.tab
msgid "Central Time - west Nunavut"
msgstr "\"Central Time\" - vest-Nunavut"

#. generated from zone.tab
msgid "Ceuta & Melilla"
msgstr "Ceuta og Melilla"

#. generated from zone.tab
msgid "Chatham Islands"
msgstr "Chatham-øyene"

#. generated from zone.tab
msgid "Davis Station, Vestfold Hills"
msgstr "Davis-stasjonen, Vestfold-høydene"

#. generated from zone.tab
msgid "Dornod, Sukhbaatar"
msgstr "Dornod, Sukhbaatar"

#. generated from zone.tab
msgid "Dumont-d'Urville Base, Terre Adelie"
msgstr "Dumont-d'Urville-basen, Terre Adelie"

#. generated from zone.tab
msgid "E Amazonas"
msgstr "Østre Amazonas"

#. generated from zone.tab
msgid "E Argentina (BA, DF, SC, TF)"
msgstr "Østre Argentina (BA, DF, SC, TF)"

#. generated from zone.tab
msgid "east China - Beijing, Guangdong, Shanghai, etc."
msgstr "øst-Kina - Beijing, Guangdong, Shanghai, etc."

#. generated from zone.tab
msgid "east coast, north of Scoresbysund"
msgstr "østkysten, nord for Scoresbysund"

#. generated from zone.tab
msgid "east Dem. Rep. of Congo"
msgstr "østre Kongo"

#. generated from zone.tab
msgid "Easter Island & Sala y Gomez"
msgstr "Påskeøyene & Sala y Gomez"

#. generated from zone.tab
msgid "Eastern Standard Time - central Nunavut"
msgstr "\"Eastern Standard Time\" - midt-Nunavut."

#. generated from zone.tab
msgid "Eastern Standard Time - east Nunavut"
msgstr "\"Eastern Standard Time\" - østre-Nunavut"

#. generated from zone.tab
msgid "Eastern Standard Time - Indiana - Crawford County"
msgstr "\"Eastern Standard Time\" - Indiana - Crawford County"

#. generated from zone.tab
msgid "Eastern Standard Time - Indiana - most locations"
msgstr "\"Eastern Standard Time\" - de fleste steder i Indiana"

#. generated from zone.tab
msgid "Eastern Standard Time - Indiana - Starke County"
msgstr "\"Eastern Standard Time\" - Indiana - Starke County"

#. generated from zone.tab
msgid "Eastern Standard Time - Indiana - Switzerland County"
msgstr "\"Eastern Standard Time\" - Indiana - Switzerland County"

#. generated from zone.tab
msgid "Eastern Standard Time - Pangnirtung, Nunavut"
msgstr "\"Eastern Standard Time\" - Pangnirtung, Nunavut"

#. generated from zone.tab
msgid "Eastern Time"
msgstr "\"Eastern Time\" (USAs østkyst)"

#. generated from zone.tab
msgid "Eastern Time - Kentucky - Louisville area"
msgstr "\"Eastern Time\" - Kentucky - Louisville-området"

#. generated from zone.tab
msgid "Eastern Time - Kentucky - Wayne County"
msgstr "\"Eastern Time\" - Kentucky - Wayne County"

#. generated from zone.tab
msgid "Eastern Time - Michigan - most locations"
msgstr "\"Eastern Time\" - de fleste steder i Michigan."

#. generated from zone.tab
msgid "Eastern Time - Ontario & Quebec - most locations"
msgstr "\"Eastern Time\" - de fleste steder i Ontario og Quebec"

#. generated from zone.tab
msgid ""
"Eastern Time - Ontario & Quebec - places that did not observe DST 1967-1973"
msgstr ""
"\"Eastern Time\" - steder i Ontario og Quebec som ikke hadde sommertid i "
"1967-1973"

#. generated from zone.tab
msgid "Eastern Time - Thunder Bay, Ontario"
msgstr "\"Eastern Time\" - Thunder Bay, Ontario"

#. generated from zone.tab
msgid "east & south Borneo, Celebes, Bali, Nusa Tengarra, west Timor"
msgstr "Øst- og syd-Borneo, Celebes, Bali, Nusa Tengarra, vest-Timor"

#. generated from zone.tab
msgid "east Uzbekistan"
msgstr "øst-Uzbekistan"

#. generated from zone.tab
msgid "Galapagos Islands"
msgstr "Galapagos-øyene"

#. generated from zone.tab
msgid "Gambier Islands"
msgstr "Gambier-øyene"

#. generated from zone.tab
msgid "Gilbert Islands"
msgstr "Gilbert-øyene"

#. generated from zone.tab
msgid "Great Britain"
msgstr "Storbritannia"

#. generated from zone.tab
msgid "Hawaii"
msgstr "Hawaii"

#. generated from zone.tab
msgid "Heilongjiang"
msgstr "Heilongjiang"

#. generated from zone.tab
msgid "Irian Jaya & the Moluccas"
msgstr "Irian Jaya og Molukkene"

#. generated from zone.tab
msgid "Jan Mayen"
msgstr "Jan Mayen"

#. generated from zone.tab
msgid "Java & Sumatra"
msgstr "Java og Sumatra"

#. generated from zone.tab
msgid "Johnston Atoll"
msgstr "Johnston-atollet"

#. generated from zone.tab
msgid "Jujuy (JY)"
msgstr "Jujuy (JY)"

#. generated from zone.tab
msgid "Kosrae"
msgstr "Kosrae"

#. generated from zone.tab
msgid "Kwajalein"
msgstr "Kwajalein"

#. generated from zone.tab
msgid "Line Islands"
msgstr "Line Islands"

#. generated from zone.tab
msgid "Lord Howe Island"
msgstr "Lord Howe-øya"

#. generated from zone.tab
msgid "Madeira Islands"
msgstr "Madeira"

#. generated from zone.tab
msgid "Marquesas Islands"
msgstr "Marquesas-øyene"

#. generated from zone.tab
msgid "Mato Grosso, Mato Grosso do Sul"
msgstr "Mato Grosso, Mato Grosso do Sul"

#. generated from zone.tab
msgid "Mawson Station, Holme Bay"
msgstr "Mawson-stasjonen, Holme-bukta"

#. generated from zone.tab
msgid "McMurdo Station, Ross Island"
msgstr "McMurdo-stasjonen, Ross Island"

#. generated from zone.tab
msgid "Mendoza (MZ)"
msgstr "Mendoza (MZ)"

#. generated from zone.tab
msgid "Midway Islands"
msgstr "Midway-øyene"

#. generated from zone.tab
msgid "Moscow+00 - west Russia"
msgstr "Moskva+00 - vest-Russland"

#. generated from zone.tab
msgid "Moscow+01 - Caspian Sea"
msgstr "Moskva+01 - det kaspiske hav"

#. generated from zone.tab
msgid "Moscow-01 - Kaliningrad"
msgstr "Moskva-01 - Kaliningrad"

#. generated from zone.tab
msgid "Moscow+02 - Urals"
msgstr "Moskva+02 - Uralfjellene"

#. generated from zone.tab
msgid "Moscow+03 - Novosibirsk"
msgstr "Moskva+03 - Novosibirsk"

#. generated from zone.tab
msgid "Moscow+03 - west Siberia"
msgstr "Moskva+03 - vest-Sibir"

#. generated from zone.tab
msgid "Moscow+04 - Yenisei River"
msgstr "Moskva+04 - Yenisei-elven"

#. generated from zone.tab
msgid "Moscow+05 - Lake Baikal"
msgstr "Moskva+05 - Baikal-sjøen"

#. generated from zone.tab
msgid "Moscow+06 - Lena River"
msgstr "Moskva+06 - Lena-elven"

#. generated from zone.tab
msgid "Moscow+07 - Amur River"
msgstr "Moskva+07 - Amur-elven"

#. generated from zone.tab
msgid "Moscow+07 - Sakhalin Island"
msgstr "Moskva+07 - Sakhalin"

#. generated from zone.tab
msgid "Moscow+08 - Magadan"
msgstr "Moskva+08 - Magadan"

#. generated from zone.tab
msgid "Moscow+09 - Kamchatka"
msgstr "Moskva+10 - Kamchatka"

#. generated from zone.tab
msgid "Moscow+10 - Bering Sea"
msgstr "Moskva+10 - Beringstredet"

#. generated from zone.tab
msgid "most locations (CB,CC,CH,CN,ER,FM,LP,LR,MN,NQ,RN,SA,SE,SF,SJ,SL,TM)"
msgstr ""

#. generated from zone.tab
msgid "Mountain Standard Time - Arizona"
msgstr "\"Mountain Standard Time\" - Arizona"

#. generated from zone.tab
msgid ""
"Mountain Standard Time - Dawson Creek & Fort Saint John, British Columbia"
msgstr ""
"\"Mountain Standard Time: - Dawson Creek, Fort Saint John, britisk Columbia"

#. generated from zone.tab
msgid "Mountain Standard Time - Sonora"
msgstr "\"Mountain Standard Time\" - Sonora"

#. generated from zone.tab
msgid "Mountain Time"
msgstr "\"Mountain Time\""

#. generated from zone.tab
msgid "Mountain Time - Alberta, east British Columbia & west Saskatchewan"
msgstr ""
"\"Mountain Time\" - Alberta, østre britisk Columbia og vest-Saskatchewan"

#. generated from zone.tab
msgid "Mountain Time - central Northwest Territories"
msgstr "\"Mountain Time\" - midt-\"Northwest Territories\""

#. generated from zone.tab
msgid "Mountain Time - Chihuahua"
msgstr "\"Mountain Time\" - Chihuahua"

#. generated from zone.tab
msgid "Mountain Time - Navajo"
msgstr "\"Mountain Time\" - Navajo"

#. generated from zone.tab
msgid "Mountain Time - S Baja, Nayarit, Sinaloa"
msgstr "\"Mountain Time\" - S Baja, Nayarit, Sinaloa"

#. generated from zone.tab
msgid "Mountain Time - south Idaho & east Oregon"
msgstr "\"Mountain Time\" - sør-Idaho og øst-Oregon"

#. generated from zone.tab
msgid "Mountain Time - west Northwest Territories"
msgstr "\"Mountain Time\" - vest-\"Northwest Territories\""

#. generated from zone.tab
msgid "NE Brazil (MA, PI, CE, RN, PR)"
msgstr "Nordøstre Brasil (MA, PI, CE, RN, PR)"

#. generated from zone.tab
msgid "Newfoundland Island"
msgstr "Newfoundland"

#. generated from zone.tab
msgid "New South Wales - most locations"
msgstr "De fleste steder i New South Wales"

#. generated from zone.tab
msgid "New South Wales - Yancowinna"
msgstr "New South Wales - Yancowinna"

#. generated from zone.tab
msgid "northeast Mali"
msgstr "nordøstre Mali"

#. generated from zone.tab
msgid "Northern Ireland"
msgstr "Nord-Irland"

#. generated from zone.tab
msgid "Northern Territory"
msgstr "Nordterritoriet"

#. generated from zone.tab
msgid "Pacific Time - north Yukon"
msgstr "\"Pacific Time\" - nord-Yukon"

#. generated from zone.tab
msgid "Pacific Time - south Yukon"
msgstr "\"Pacific Time\" - sør-Yukon"

#. generated from zone.tab
msgid "Pacific Time - west British Columbia"
msgstr "\"Pacific Time\" - vestre Britisk Columbia"

#. generated from zone.tab
msgid "Palmer Station, Anvers Island"
msgstr "Palmer Station, Anvers-øya"

#. generated from zone.tab
msgid "peninsular Malaysia"
msgstr "Malaysia"

#. generated from zone.tab
msgid "Pernambuco"
msgstr "Pernambuco"

#. generated from zone.tab
msgid "Phoenix Islands"
msgstr "Phoenix-øyene"

#. generated from zone.tab
msgid "Ponape (Pohnpei)"
msgstr "Ponape (Pohnpei)"

#. generated from zone.tab
msgid "Queensland - Holiday Islands"
msgstr "Queensland - Holiday Islands"

#. generated from zone.tab
msgid "Queensland - most locations"
msgstr "De fleste steder i Queensland"

#. generated from zone.tab
msgid "Qyzylorda (Kyzylorda, Kzyl-Orda)"
msgstr "Qyzylorda (Kyzylorda, Kzyl-Orda)"

#. generated from zone.tab
msgid "Roraima"
msgstr "Roraima"

#. generated from zone.tab
msgid "Ruthenia"
msgstr "Ruthenia"

#. generated from zone.tab
msgid "Sabah & Sarawak"
msgstr "Sabah og Sarawak"

#. generated from zone.tab
msgid "Scoresbysund / Ittoqqortoormiit"
msgstr "Scoresbysund / Ittoqqortoormiit"

#. generated from zone.tab
msgid "Society Islands"
msgstr "Society Islands"

#. generated from zone.tab
msgid "South Australia"
msgstr "Syd-Australia"

#. generated from zone.tab
msgid "southwest Mali"
msgstr "sydvest-Mali"

#. generated from zone.tab
msgid "southwest Xinjiang Uyghur"
msgstr "sydvest Xinjian Uyghur"

#. generated from zone.tab
msgid "S & SE Brazil (BA, GO, DF, MG, ES, RJ, SP, PR, SC, RS)"
msgstr "Syd- og Sydøst-Brasil (BA, GO, DF, MG, ES, RJ, SP, PR, SC, RS)"

#. generated from zone.tab
msgid "Svalbard"
msgstr "Svalbard"

#. generated from zone.tab
msgid "Syowa Station, E Ongul I"
msgstr "Syowa Station, østre Ongul I"

#. generated from zone.tab
msgid "Tasmania"
msgstr "Tasmania"

#. generated from zone.tab
msgid "Thule / Pituffik"
msgstr "Thule / Pituffik"

#. generated from zone.tab
msgid "Tibet & most of Xinjiang Uyghur"
msgstr "Tibet og det meste av Xinjiang Uyghur"

#. generated from zone.tab
msgid "Tocantins"
msgstr "Tocantins"

#. generated from zone.tab
msgid "Truk (Chuuk)"
msgstr "Truk (Chuuk)"

#. generated from zone.tab
msgid "Victoria"
msgstr "Victoria"

#. generated from zone.tab
msgid "Vostok Station, S Magnetic Pole"
msgstr "Vostok-stasjonen, den sydlige magnetiske pol"

#. generated from zone.tab
msgid "Wake Island"
msgstr "Wake Island"

#. generated from zone.tab
msgid "W Amazonas"
msgstr "vestre Amazonas"

#. generated from zone.tab
msgid "west & central Borneo"
msgstr "Vest- og sentral-Borneo"

#. generated from zone.tab
msgid "west Dem. Rep. of Congo"
msgstr "vest-Kongo"

#. generated from zone.tab
msgid "Western Australia"
msgstr "Vest-Australia"

#. generated from zone.tab
msgid "West Kazakhstan"
msgstr "Vest-Kazakhstan"

#. generated from zone.tab
msgid "west Uzbekistan"
msgstr "vest-Uzbekistan"

#. generated from zone.tab
msgid "W Para, Rondonia"
msgstr "Vest-Para, Rondonia"

#. generated from zone.tab
msgid "Yap"
msgstr "Yap"

#. generated from zone.tab
msgid "Zaporozh'ye, E Lugansk"
msgstr "Zaporozh'ye, østre Lugansk"

#. generated from lang-table
msgid "Chinese(Simplified)"
msgstr "Kinesisk(forenklet)"

#. generated from lang-table
msgid "Chinese(Traditional)"
msgstr "Kinesisk(tradisjonell)"

#. generated from lang-table
msgid "Czech"
msgstr "Tsjekkisk"

#. generated from lang-table
msgid "Danish"
msgstr "Dansk"

#. generated from lang-table
msgid "English"
msgstr "Engelsk"

#. generated from lang-table
msgid "French"
msgstr "Fransk"

#. generated from lang-table
msgid "German"
msgstr "Tysk"

#. generated from lang-table
msgid "Icelandic"
msgstr "Islandsk"

#. generated from lang-table
msgid "Italian"
msgstr "Italiensk"

#. generated from lang-table
msgid "Japanese"
msgstr "Japansk"

#. generated from lang-table
msgid "Korean"
msgstr "Koreansk"

#. generated from lang-table
msgid "Norwegian"
msgstr "Norsk"

#. generated from lang-table
msgid "Portuguese"
msgstr "Portugisisk:"

#. generated from lang-table
#, fuzzy
msgid "Romanian"
msgstr "Gjenstår"

#. generated from lang-table
msgid "Russian"
msgstr "Russisk"

#. generated from lang-table
msgid "Slovenian"
msgstr "Slovensk"

#. generated from lang-table
msgid "Spanish"
msgstr "Spansk"

#. generated from lang-table
msgid "Swedish"
msgstr "Svensk"

#. generated from lang-table
msgid "Ukrainian"
msgstr "Ukrainsk"

#~ msgid "Close"
#~ msgstr "Lukk"

#~ msgid "Unable to probe"
#~ msgstr "Kunne ikke søke"

#~ msgid ""
#~ "You cannot remove this partition, as it is an extended partition which "
#~ "contains %s"
#~ msgstr ""
#~ "Du kan ikke fjerne denne partisjonen siden den er en utvidet partisjon "
#~ "som inneholder %s"

#~ msgid "Unable to Edit"
#~ msgstr "Kan ikke redigere"

#~ msgid ""
#~ "You have chosen to format a pre-existing partition.  This will destroy "
#~ "all data that was previously on it.\n"
#~ "\n"
#~ "Are you sure you want to do this?"
#~ msgstr ""
#~ "Du har valgt å formatere en eksisterende partisjon. Dette vil ødelegge "
#~ "alle data som er på den.\n"
#~ "\n"
#~ "Er du sikker på at du vil gjøre dette?"

#~ msgid ""
#~ "You have chosen not to format a pre-existing partition which is being "
#~ "mounted under a system directory.  Unless you have particular needs to "
#~ "preserve data on this partition, it is highly recommended you format this "
#~ "partition to guarantee the data formerly on the partition does not "
#~ "corrupt your new installation.\n"
#~ "\n"
#~ "Are you sure you want to do this?"
#~ msgstr ""
#~ "Du har valgt å ikke formatere en eksisterende partisjon som skal monteres "
#~ "som en systemkatalog. Med mindre du har spesielle behov for å bevare data "
#~ "på denne partisjonen anbefales det på det sterkeste at du formaterer "
#~ "denne partisjonen for å sikre at tidligere data ikke gjør den nye "
#~ "installasjonen korrupt.\n"
#~ "\n"
#~ "Er du sikker på at du ikke ønsker å formatere?"

#~ msgid "Unknown Card"
#~ msgstr "Ukjent kort"

#~ msgid "Video Ram"
#~ msgstr "Minne på skjermkort"

#~ msgid "X server"
#~ msgstr "X-tjener"

#~ msgid "Unable to detect video card"
#~ msgstr "Kunne ikke finne skjermkort"

#~ msgid "Attempting to start framebuffer based X server"
#~ msgstr "Forsøker å starte framebuffer-basert X-tjener"

#~ msgid "Root Password: "
#~ msgstr "Root-passord: "

#~ msgid ""
#~ "\n"
#~ "\n"
#~ "A boot disk is REQUIRED to boot a partitionless install."
#~ msgstr ""
#~ "\n"
#~ "\n"
#~ "En oppstartsdiskett er PÅKREVET for å starte en partisjonsløs "
#~ "installasjon."

#~ msgid "Skip boot disk creation"
#~ msgstr "Hopp over oppstartsdiskett"

#~ msgid "Boot Loader Password Configuration"
#~ msgstr "Passord for oppstartslaster"

#~ msgid "Password accepted."
#~ msgstr "Passordet er godtatt."

#~ msgid "Password is too short."
#~ msgstr "Passordet er for kort."

#~ msgid "Passwords do not match."
#~ msgstr "Passordene er ikke like."

#~ msgid "Use a GRUB Password?"
#~ msgstr "Bruk passord for GRUB?"

#~ msgid ""
#~ "Congratulations, configuration is complete.\n"
#~ "\n"
#~ "For information on errata (updates and bug fixes), visit http://www."
#~ "redhat.com/errata.\n"
#~ "\n"
#~ "Information on using and configuring your system is available in the %s "
#~ "manuals at http://www.redhat.com/docs."
#~ msgstr ""
#~ "Gratulerer, konfigurasjonen er ferdig.\n"
#~ "\n"
#~ "For informasjon om errata (oppdateringer og feilrettinger), besøk http://"
#~ "www.redhat.com/errata.\n"
#~ "\n"
#~ "Informasjon om bruk og konfigurasjon av systemet er tilgjengelig i "
#~ "brukerhåndbøkene for %s, og er tilgjengelige på http://www.redhat.com/"
#~ "docs."

#~ msgid " is an invalid port."
#~ msgstr " er en ugyldig port."

#~ msgid "The format is 'port:protocol'.  For example, '1234:udp'"
#~ msgstr "Formatet er 'port:protokoll'. For eksempel '1234:udp'"

#~ msgid "Choose partitions to Format"
#~ msgstr "Velg partisjoner som skal formateres"

#~ msgid "Keyboard Configuration"
#~ msgstr "Konfigurasjon av tastatur"

#~ msgid "Which model keyboard is attached to the computer?"
#~ msgstr "Hvilken type tastatur er koblet til denne datamaskinen?"

#~ msgid "Layout"
#~ msgstr "Utforming"

#~ msgid "Dead Keys"
#~ msgstr "Døde taster"

#~ msgid "Enable dead keys"
#~ msgstr "Bruk døde taster"

#~ msgid "Disable dead keys"
#~ msgstr "Ikke bruk døde taster"

#~ msgid "Test your selection here:"
#~ msgstr "Test ditt valg her:"

#~ msgid "Currently installed languages:"
#~ msgstr "Støtte er installert for følgende språk:"

#~ msgid "Port"
#~ msgstr "Port"

#~ msgid "Broadcast"
#~ msgstr "Kringkast"

#~ msgid "Total install size: "
#~ msgstr "Total størrelse for installasjon: "

#~ msgid "_New"
#~ msgstr "_Ny"

#~ msgid "View:"
#~ msgstr "Vis:"

#~ msgid "%s  %s"
#~ msgstr "%s  %s"

#~ msgid "Exiting anaconda now"
#~ msgstr "Avslutter anaconda nå"

#~ msgid "Would you like to configure your system?"
#~ msgstr "Vil du konfigurere systemet ditt?"

#~ msgid "Unknown server"
#~ msgstr "Ukjent vert"

#~ msgid ""
#~ "This video card has no suitable X server in the database.  You will need "
#~ "to choose a different card or choose the 'Skip X Configuration' button."
#~ msgstr ""
#~ "Dette grafikkorter har ingen driver for X i databasen. Du kan velge et "
#~ "annet grafikkort eller\n"
#~ "'Hopp over konfigurasjon av X'."

#~ msgid "Other"
#~ msgstr "Andre"

#~ msgid ""
#~ "A custom boot disk provides a way of booting into your Linux system "
#~ "without depending on the normal boot loader. This is useful if you don't "
#~ "want to install lilo on your system, another operating system removes "
#~ "lilo, or lilo doesn't work with your hardware configuration. A custom "
#~ "boot disk can also be used with the Red Hat rescue image, making it much "
#~ "easier to recover from severe system failures.\n"
#~ "\n"
#~ "Would you like to create a boot disk for your system?"
#~ msgstr ""
#~ "En egendefinert oppstartsdiskett gir deg en måte å starte opp ditt Linux "
#~ "system uten å være avhengig av oppstartslasteren. Dette er nyttig hvis du "
#~ "ikke ønsker å installere lilo på systemet, et annet operativsystem "
#~ "fjerner lilo, eller hvis lilo ikke virker med din "
#~ "maskinvarekonfigurasjon. En egendefinert oppstartsdiskett kan også brukes "
#~ "med Red Hats redningsdisk, og gjør det mye lettere å rette opp alvorlige "
#~ "systemfeil.\n"
#~ "\n"
#~ "Ønsker du å lage en oppstartsdiskett for ditt system?"

#~ msgid ""
#~ "Congratulations, your %s installation is complete.\n"
#~ "\n"
#~ "Remove any floppy diskettes you used during the installation process and "
#~ "press <Enter> to reboot your system. \n"
#~ "\n"
#~ "%sFor information on errata (updates and bug fixes), visit http://www."
#~ "redhat.com/errata.\n"
#~ "\n"
#~ "Information on using your system is available in the Red Hat Linux "
#~ "manuals at http://www.redhat.com/docs."
#~ msgstr ""
#~ "Gratulerer, din installering av %s er fullført.\n"
#~ "\n"
#~ "Fjern alle disketter du brukte under installasjonen og trykk <Enter> for "
#~ "å starte på nytt.\n"
#~ "\n"
#~ "%sFor informasjon om errata (oppdateringer og feilrettinger), besøk "
#~ "http://www.redhat.com/errata.\n"
#~ "\n"
#~ "Informasjon om bruk av systemet er tilgjengelig i brukerhåndbøkene for "
#~ "Red Hat Linux som finnes på http://www.redhat.com/docs."

#~ msgid "<Enter> to continue"
#~ msgstr "<Enter> for å fortsette"

#~ msgid ""
#~ "Congratulations, package installation is complete.\n"
#~ "\n"
#~ "Press return to continue.\n"
#~ "\n"
#~ "Information on configuring and using your Red Hat Linux system is "
#~ "contained in the %s manuals."
#~ msgstr ""
#~ "Gratulerer, pakkeinstallasjonen er fullført.\n"
#~ "\n"
#~ "Trykk <Enter> for å fortsette.\n"
#~ "\n"
#~ "Informasjon om konfigurasjon og bruk av ditt Red Hat Linux system finnes "
#~ "i brukerhåndbøkene for %s."

#~ msgid "<Enter> to exit"
#~ msgstr "<Enter> for å avslutte"

#~ msgid "Bad User ID"
#~ msgstr "Ugyldig bruker-ID"

#~ msgid ""
#~ "Welcome to %s!\n"
#~ "\n"
#~ "You have entered reconfiguration mode, which will allow you to configure "
#~ "site-specific options of your computer.\n"
#~ "\n"
#~ "To exit without changing your setup select the Cancel button below."
#~ msgstr ""
#~ "Velkommen til %s!\n"
#~ "\n"
#~ "Du har gått til rekonfigurasjonsmodus, som lar deg konfigurere steds-"
#~ "spesifikke alternativer for din maskin.\n"
#~ "\n"
#~ "For å avslutte uten å endre oppsettet velg Avbryt-knappen under."

#~ msgid "You cannot go back from this step."
#~ msgstr "Du kan ikke gå tilbake fra dette steget."

#~ msgid "Other CDROM"
#~ msgstr "Annen CD-ROM"

#~ msgid ""
#~ "Please enter the following information:\n"
#~ "\n"
#~ "    o the name or IP number of your NFS server\n"
#~ "    o the directory on that server containing\n"
#~ "      %s for your architecture"
#~ msgstr ""
#~ "Skriv inn følgende informasjon:\n"
#~ "\n"
#~ "    o navnet eller IP-adressen til din NFS-tjener\n"
#~ "    o katalogen på tjeneren som inneholder \n"
#~ "      %s for din arkitektur."

#~ msgid "Map Image to display"
#~ msgstr "Kart som skal vises"

#~ msgid "Width of map (in pixels)"
#~ msgstr "Bredde på kart (i piksler)"

#~ msgid "Enable antialias"
#~ msgstr "Slå på antialias"

#~ msgid "World"
#~ msgstr "Verden"

#~ msgid "North America"
#~ msgstr "Nord-Amerika"

#~ msgid "South America"
#~ msgstr "Sør-Amerika"

#~ msgid "Indian Rim"
#~ msgstr "Indiske hav"

#~ msgid "Europe"
#~ msgstr "Europa"

#~ msgid "Africa"
#~ msgstr "Afrika"

#~ msgid "Asia"
#~ msgstr "Asia"

#~ msgid "Cannot load timezone data"
#~ msgstr "Kan ikke lese inn tidssonedata"

#~ msgid "gglobe-canvas"
#~ msgstr "gglobe-canvas"

#~ msgid "View: "
#~ msgstr "Vis:"

#~ msgid "NE Argentina (SF, ER, CN, MN, CC, FM, LP, CH)"
#~ msgstr "Nordøstre Argentina (SF, ER, CN, MN, CC, FM, LP, CH)"

#~ msgid "W Argentina (CB, SA, TM, LR, SJ, SL, NQ, RN)"
#~ msgstr "Vest-Argentina (CB, SA, TM, LR, SJ, SL, NQ, RN)"

#~ msgid ""
#~ "Chinese(Simplified)    zh_CN.GB2312    None    None            zh_CN."
#~ "GB2312            us              Asia/Shanghai"
#~ msgstr ""
#~ "Kinesisk(forenklet)    zh_CN.GB2312    None    None            zh_CN."
#~ "GB2312            us              Asia/Shanghai"

#~ msgid ""
#~ "Chinese(Traditional)   zh_TW.Big5      None    None            zh_TW."
#~ "Big5              us              Asia/Taipei"
#~ msgstr ""
#~ "Kinesisk(Tradisjonell)   zh_TW.Big5      None    None            zh_TW."
#~ "Big5              us              Asia/Taipei"

#~ msgid "Portuguese(Brasilian) pt"
#~ msgstr "Portugisisk(Brasil)"

#~ msgid "China coast"
#~ msgstr "Kina-kysten"

#~ msgid "China mountains"
#~ msgstr "Kina - fjellområdene"

#~ msgid "Eastern Turkestan"
#~ msgstr "Østre Turkmenistan"

#~ msgid "central Kazakhstan"
#~ msgstr "midt-Kazakhstan"

#~ msgid "east Greenland"
#~ msgstr "øst-Grønland"

#~ msgid "north Manchuria"
#~ msgstr "nord-Mandsjuria"

#~ msgid "northwest Greenland"
#~ msgstr "nordvestre Grønland"

#~ msgid "southwest Greenland"
#~ msgstr "sydvest-Grønland"

#~ msgid "west Kazakhstan"
#~ msgstr "vest-Kazakhstan"

#~ msgid "What language should be used during the installation process?"
#~ msgstr "Hvilket språk skal brukes under installasjonen?"

#, fuzzy
#~ msgid "Welcome to "
#~ msgstr "Velkommen"

#, fuzzy
#~ msgid ""
#~ "? If you don't see the disk drive you're using listed here, press F2 to "
#~ "configure additional devices."
#~ msgstr ""
#~ "Det ser ikke ut som om du har noen harddisker på systemet ditt! Ønsker du "
#~ "å konfigurere noen tilleggsenheter?"

#, fuzzy
#~ msgid ""
#~ "Please enter the following information:\n"
#~ "\n"
#~ "    o the name or IP number of your FTP server\n"
#~ "    o the directory on that server containing\n"
#~ "      "
#~ msgstr ""
#~ "Skriv inn følgende informasjon:\n"
#~ "\n"
#~ "    o navnet eller IP-adressen til din FTP-tjener\n"
#~ "    o katalogen på tjeneren som inneholder\n"
#~ "      Red Hat Linux  for din arkitektur\n"

#~ msgid "Red Hat Linux Installer"
#~ msgstr "Red Hat Linux installasjon"

#~ msgid "Password (again):"
#~ msgstr "Passord (igjen):"

#~ msgid "User ID"
#~ msgstr "Bruker-ID:"

#~ msgid "Red Hat Linux"
#~ msgstr "Red Hat Linux"

#~ msgid "Welcome to Red Hat Linux"
#~ msgstr "Velkommen til Red Hat Linux"