# translation of hi.po to Hindi # This file is distributed under the same license as the PACKAGE package. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER. # Rajesh Ranjan , 2004, 2005, 2006. # msgid "" msgstr "" "Project-Id-Version: hi\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2006-05-16 17:57-0400\n" "PO-Revision-Date: 2006-06-19 10:13+0530\n" "Last-Translator: Rajesh Ranjan \n" "Language-Team: Hindi \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.9.1\n" "Plural-Forms: nplurals=2; plural=(n!=1);\n\n" "\n" "\n" "\n" "\n" #: ../anaconda:255 msgid "Unknown Error" msgstr "अनजान त्रुटि" #: ../anaconda:258 #, c-format msgid "Error pulling second part of kickstart config: %s!" msgstr "किकस्टार्ट config के दूसरे भाग चलाने में त्रुटि: %s!" #: ../anaconda:411 msgid "Press for a shell" msgstr "एक शैल के लिये दबायें" #: ../anaconda:442 ../gui.py:244 ../rescue.py:46 ../rescue.py:241 #: ../rescue.py:322 ../rescue.py:350 ../rescue.py:360 ../rescue.py:441 #: ../rescue.py:447 ../text.py:386 ../text.py:532 ../vnc.py:140 #: ../textw/confirm_text.py:26 ../textw/confirm_text.py:54 #: ../textw/constants_text.py:36 ../textw/iscsi_text.py:73 #: ../textw/network_text.py:31 ../textw/network_text.py:177 #: ../textw/network_text.py:408 ../textw/network_text.py:416 #: ../loader2/cdinstall.c:136 ../loader2/cdinstall.c:137 #: ../loader2/cdinstall.c:256 ../loader2/cdinstall.c:259 #: ../loader2/cdinstall.c:376 ../loader2/cdinstall.c:381 #: ../loader2/cdinstall.c:386 ../loader2/cdinstall.c:450 #: ../loader2/dirbrowser.c:139 ../loader2/driverdisk.c:269 #: ../loader2/driverdisk.c:300 ../loader2/driverdisk.c:334 #: ../loader2/driverdisk.c:372 ../loader2/driverdisk.c:386 #: ../loader2/driverdisk.c:400 ../loader2/driverdisk.c:579 #: ../loader2/driverdisk.c:617 ../loader2/driverselect.c:70 #: ../loader2/driverselect.c:208 ../loader2/hdinstall.c:104 #: ../loader2/hdinstall.c:155 ../loader2/hdinstall.c:214 #: ../loader2/hdinstall.c:381 ../loader2/hdinstall.c:432 #: ../loader2/hdinstall.c:467 ../loader2/hdinstall.c:536 #: ../loader2/hdinstall.c:579 ../loader2/hdinstall.c:592 ../loader2/kbd.c:128 #: ../loader2/kickstart.c:121 ../loader2/kickstart.c:131 #: ../loader2/kickstart.c:174 ../loader2/kickstart.c:273 #: ../loader2/kickstart.c:409 ../loader2/lang.c:101 ../loader2/lang.c:364 #: ../loader2/loader.c:329 ../loader2/loader.c:342 ../loader2/loader.c:353 #: ../loader2/loader.c:760 ../loader2/loader.c:926 ../loader2/mediacheck.c:329 #: ../loader2/mediacheck.c:387 ../loader2/mediacheck.c:432 #: ../loader2/method.c:153 ../loader2/method.c:372 ../loader2/method.c:457 #: ../loader2/modules.c:964 ../loader2/net.c:251 ../loader2/net.c:289 #: ../loader2/net.c:562 ../loader2/net.c:925 ../loader2/net.c:948 #: ../loader2/net.c:1109 ../loader2/nfsinstall.c:54 #: ../loader2/nfsinstall.c:127 ../loader2/nfsinstall.c:214 #: ../loader2/nfsinstall.c:223 ../loader2/nfsinstall.c:262 #: ../loader2/telnetd.c:84 ../loader2/urlinstall.c:72 #: ../loader2/urlinstall.c:144 ../loader2/urlinstall.c:157 #: ../loader2/urlinstall.c:450 ../loader2/urlinstall.c:459 #: ../loader2/urlinstall.c:470 ../loader2/urls.c:181 ../loader2/urls.c:191 #: ../loader2/urls.c:200 ../loader2/urls.c:266 ../loader2/urls.c:331 #: ../loader2/urls.c:336 ../loader2/urls.c:342 ../loader2/urls.c:456 msgid "OK" msgstr "ठीक" #: ../anaconda:449 msgid "" "You do not have enough RAM to use the graphical installer. Starting text " "mode." msgstr "" "आपके पास आलेखी अधिष्ठापक का उपयोग करने के लिए पर्याप्त RAM नहीं है. पाठयांश प्रकार " "प्रारंभ कर रहा है." #: ../anaconda:473 msgid "No video hardware found, assuming headless" msgstr "कोई वीडियो हार्डवेयर नहीं मिला, शीर्षहीन मान रहा है" #: ../anaconda:484 ../anaconda:880 msgid "Unable to instantiate a X hardware state object." msgstr "एक X हार्डवेयर स्थिति वस्तु के प्रारंभिकीकरण में असमर्थ. " #: ../anaconda:509 msgid "Starting graphical installation..." msgstr "आलेखी अधिष्ठापन आरंभ कर रहा है..." #: ../anaconda:758 msgid "Install class forcing text mode installation" msgstr "अधिष्ठापन वर्ग पाठ प्रकार अधिष्ठापन के लिये दबाव डाल रहा है." #: ../anaconda:784 msgid "Graphical installation not available... Starting text mode." msgstr "आलेखी अधिष्ठापन उपलब्ध नहीं है... पाठ प्रकार प्रारंभ कर रहा है." #: ../anaconda:792 msgid "DISPLAY variable not set. Starting text mode!" msgstr "प्रदर्शक मोड चर सेट नहीं है. पाठ मोड शुरू कर रहा है!" #: ../anaconda:847 msgid "Unknown install method" msgstr "अज्ञात अधिष्ठापन विधि" #: ../anaconda:848 msgid "You have specified an install method which isn't supported by anaconda." msgstr "जिस अधिष्ठापन विधि को आपने निर्दिष्ट किया है, वो एनाकोंडा के द्वारा समर्थित नहीं है." #: ../anaconda:850 #, c-format msgid "unknown install method: %s" msgstr "अनजान अधिष्ठापन विधि: %s" #: ../autopart.py:968 msgid "Could not allocate cylinder-based partitions as primary partitions" msgstr "सिलेण्डर-आधारित विभाजनों को प्राथमिक विभाजनों की तरह बाँट नहीं सकता" #: ../autopart.py:971 msgid "Could not allocate partitions as primary partitions" msgstr "विभाजनों को प्राथमिक विभाजनों की तरह बाँट नहीं सकता" #: ../autopart.py:974 msgid "Could not allocate cylinder-based partitions" msgstr "सिलेण्डर-आधारित विभाजन दे नहीं सकता" #: ../autopart.py:977 msgid "Could not allocate partitions" msgstr "विभाजनों को बाँट नहीं सकता" #: ../autopart.py:1039 #, python-format msgid "" "Boot partition %s doesn't belong to a BSD disk label. SRM won't be able to " "boot from this partition. Use a partition belonging to a BSD disk label or " "change this device disk label to BSD." msgstr "" "%s बूट विभाजन BSD डिस्क लेबल से संबंध नहीं रखती है. SRM इस विभाजन से बूट नहीं कर सकेगा. " "BSD डिस्क लेबल संबंधी विभाजन का प्रयोग करें या इस युक्ति डिस्क लेबल को BSD में बदलें." #: ../autopart.py:1041 #, python-format msgid "" "Boot partition %s doesn't belong to a disk with enough free space at its " "beginning for the bootloader to live on. Make sure that there's at least 5MB " "of free space at the beginning of the disk that contains /boot" msgstr "" "%s बूट विभाजन उस डिस्क से संबंध नहीं रखता जिसके प्रारंभ में बूटलोडर को उपस्थित रहने के लिए " "मुक्त स्थान है. यह निश्चित करें कि /boot को समाहित करने वाले डिस्क के प्रारंभ में कम से कम " "5MB मुक्त स्थान है." #: ../autopart.py:1043 #, python-format msgid "" "Boot partition %s isn't a VFAT partition. EFI won't be able to boot from " "this partition." msgstr "%s बूट विभाजन एक VFAT विभाजन नहीं है. EFI इस विभाजन से बूट नहीं कर सकता." #: ../autopart.py:1045 msgid "" "Boot partition isn't located early enough on the disk. OpenFirmware won't " "be able to boot this installation." msgstr "" "बूट विभाजन डिस्क में काफी पहले से स्थित नहीं है. ओपनफर्मवेयर इस अधिष्ठापन को बूट नहीं कर " "सकता." #: ../autopart.py:1052 #, python-format msgid "Boot partition %s may not meet booting constraints for your architecture." msgstr "आपके आर्किटेक्चर के लिए %s बूट विभाजन बूटिंग निर्धारक से मिल नहीं सकती." #: ../autopart.py:1078 #, python-format msgid "" "Adding this partition would not leave enough disk space for already " "allocated logical volumes in %s." msgstr "" "इस विभाजन को जोड़ने से %s में पहले से बाँटे गए लॉजिकल वॉल्यूमों के लिए पर्याप्त डिस्क स्थान " "नहीं छोडेगा." #: ../autopart.py:1268 msgid "Requested Partition Does Not Exist" msgstr "आग्रह किया गया विभाजन उपस्थित नहीं है" #: ../autopart.py:1269 #, python-format msgid "" "Unable to locate partition %s to use for %s.\n" "\n" "Press 'OK' to reboot your system." msgstr "" "%s के उपयोग के लिए %s विभाजन को खोजने में असमर्थ.\n" "\n" "अपने सिस्टम को रीबूट करने के लिए 'ठीक' दबाएं." #: ../autopart.py:1296 msgid "Requested Raid Device Does Not Exist" msgstr "आग्रह किया गया Raid युक्ति उपस्थित नहीं है." #: ../autopart.py:1297 #, python-format msgid "" "Unable to locate raid device %s to use for %s.\n" "\n" "Press 'OK' to reboot your system." msgstr "" "%s के उपयोग के लिए %s raid युक्ति को खोजने में असमर्थ.\n" "\n" "अपने सिस्टम को रीबूट करने के लिए 'ठीक' दबाएं." #: ../autopart.py:1328 msgid "Requested Volume Group Does Not Exist" msgstr "निवेदित वॉल्यूम ग्रूप उपस्थित नहीं है" #: ../autopart.py:1329 #, python-format msgid "" "Unable to locate volume group %s to use for %s.\n" "\n" "Press 'OK' to reboot your system." msgstr "" "%s के उपयोग के लिए %s वॉल्यूम ग्रूप को खोजने में असमर्थ.\n" "\n" "अपने सिस्टम को रीबूट करने के लिए 'ठीक' दबाएं." #: ../autopart.py:1366 msgid "Requested Logical Volume Does Not Exist" msgstr "निवेदित लॉजिकल वॉल्यूम समूह उपस्थित नहीं है" #: ../autopart.py:1367 #, python-format msgid "" "Unable to locate logical volume %s to use for %s.\n" "\n" "Press 'OK' to reboot your system." msgstr "" "%s लॉजिकल वॉल्यूम समूह को खोजने में असमर्थ, %s के उपयोग के लिए.\n" "\n" "आपके सिस्टम को रीबूट करने के लिए 'ठीक' दबाएं." #: ../autopart.py:1481 ../autopart.py:1529 msgid "Automatic Partitioning Errors" msgstr "स्वतः विभाजन त्रुटि " #: ../autopart.py:1482 #, python-format msgid "" "The following errors occurred with your partitioning:\n" "\n" "%s\n" "\n" "Press 'OK' to reboot your system." msgstr "" "आपके विभाजन में नीचे दिया गया त्रुटि घटित हुआ:\n" "\n" "%s\n" "\n" "अपने सिस्टम को रिबूट करने के लिए 'ठीक' दबाएं." #: ../autopart.py:1492 msgid "Warnings During Automatic Partitioning" msgstr "स्वतः विभाजन के समय चेतावनी" #: ../autopart.py:1493 #, python-format msgid "" "Following warnings occurred during automatic partitioning:\n" "\n" "%s" msgstr "" "स्वतः विभाजन के समय निम्नलिखित चेतावनियाँ आयी:\n" "\n" "%s" #: ../autopart.py:1506 ../autopart.py:1523 msgid "" "\n" "\n" "Press 'OK' to reboot your system." msgstr "" "\n" "\n" "अपने सिस्टम को रीबूट करने के लिए 'ठीक' दबाएं." #: ../autopart.py:1507 ../iw/partition_gui.py:997 #: ../textw/partition_text.py:227 msgid "Error Partitioning" msgstr "विभाजन त्रुटि" #: ../autopart.py:1508 #, python-format msgid "" "Could not allocate requested partitions: \n" "\n" "%s.%s" msgstr "" "निवेदित विभाजनों को बांट नहीं सकता था: \n" "\n" "%s.%s" #: ../autopart.py:1525 msgid "" "\n" "\n" "You can choose a different automatic partitioning option, or click 'Back' to " "select manual partitioning.\n" "\n" "Press 'OK' to continue." msgstr "" "\n" "\n" "आप एक अलग स्वतः विभाजन विकल्प चुन सकते हैं, या 'पीछे' को दबा कर दस्ती रूप से विभाजन " "चुनें.\n" "\n" "जारी रखने के लिए 'ठीक' दबाएँ." #: ../autopart.py:1530 #, python-format msgid "" "The following errors occurred with your partitioning:\n" "\n" "%s\n" "\n" "This can happen if there is not enough space on your hard drive(s) for the " "installation.%s" msgstr "" "आपके विभाजन में निम्नलिखित त्रुटि आयी:\n" "\n" "%s\n" "\n" "यह तब हो सकता है जब अधिष्ठापन के लिए आपके हार्ड ड्राइव पर पर्याप्त स्थान न हो.%s" #: ../autopart.py:1541 msgid "Unrecoverable Error" msgstr "अप्राप्य त्रुटि" #: ../autopart.py:1542 msgid "Your system will now be rebooted." msgstr "आपके सिस्टम को अब रीबूट किया जाएगा." #: ../autopart.py:1689 ../bootloader.py:191 ../image.py:417 #: ../partedUtils.py:305 ../partedUtils.py:335 ../partedUtils.py:910 #: ../partedUtils.py:967 ../upgrade.py:344 ../yuminstall.py:163 #: ../yuminstall.py:986 ../iw/blpasswidget.py:145 #: ../iw/bootloader_advanced_gui.py:41 ../iw/upgrade_swap_gui.py:188 #: ../iw/upgrade_swap_gui.py:196 ../iw/upgrade_swap_gui.py:203 #: ../iw/zfcp_gui.py:247 ../textw/bootloader_text.py:124 #: ../textw/bootloader_text.py:449 ../textw/partition_text.py:231 #: ../textw/upgrade_text.py:174 ../loader2/loader.c:396 msgid "Warning" msgstr "चेतावनी" #: ../autopart.py:1695 msgid "" "Automatic Partitioning sets partitions based on the selected installation " "type. You also can customize the partitions once they have been created.\n" "\n" "The manual disk partitioning tool, Disk Druid, allows you to create " "partitions in an interactive environment. You can set the file system types, " "mount points, partition sizes, and more." msgstr "" "स्वतः विभाजन चयनित अधिष्ठापन प्रकार पर आधारित विभाजनों को व्यवस्थित करता है. निर्मित " "हो जाने पर आप विभाजनों को पसंदीदा कर सकते हैं.\n" "\n" "दस्ती डिस्क विभाजन उपकरण, डिस्क ड्रूयिड, आपको एक अंतःक्रियात्मक वातावरण में विभाजन " "बनाने की अनुमति देता है. आप फाइल सिस्टम प्रकारों, आरोह बिंदु, विभाजन आकारों और कई को " "व्यवस्थित कर सकते हैं." #: ../autopart.py:1706 msgid "" "Before automatic partitioning can be set up by the installation program, you " "must choose how to use the space on your hard drives." msgstr "" "स्वतः विभाजन को अधिष्ठापन कार्यक्रम के द्वारा जमाये जाने से पहले, आपको जरूर चुनना चाहिए " "कि आपके हार्ड ड्राइव पर स्थान का कैसे प्रयोग होता है." #: ../autopart.py:1711 msgid "Remove all partitions on this system" msgstr "इस सिस्टम पर सभी विभाजनों को हटाएँ" #: ../autopart.py:1712 msgid "Remove all Linux partitions on this system" msgstr "इस सिस्टम पर सभी Linux विभाजनों को हटाएँ" #: ../autopart.py:1713 msgid "Keep all partitions and use existing free space" msgstr "सभी विभाजनों को रखें और उपस्थित मुक्त स्थान का प्रयोग करें" #: ../autopart.py:1715 #, python-format msgid "" "You have chosen to remove all partitions (ALL DATA) on the following drives:%" "s\n" "Are you sure you want to do this?" msgstr "" "निम्नांकित चालनों पर आपने सभी विभाजनों (सारे आंकड़ों) को हटाने के लिए चयनित किया है:%s " "s\n" "क्या आप यह करने के लिए निश्चित हैं?" #: ../autopart.py:1719 #, python-format msgid "" "You have chosen to remove all Linux partitions (and ALL DATA on them) on the " "following drives:%s\n" "Are you sure you want to do this?" msgstr "" "निम्नांकित चालनों पर आपने सभी Linux विभाजनों (और उनपर सब आंकड़ा) को हटाना चयनित " "किया है:%s\n" "क्या आप यह करने के लिए निश्चित हैं?" #: ../backend.py:97 #, python-format msgid "Upgrading %s-%s-%s.%s.\n" msgstr "%s-%s-%s.%s. का उन्नयन कर रहा है\n" #: ../backend.py:99 #, python-format msgid "Installing %s-%s-%s.%s.\n" msgstr "%s-%s-%s.%s का अधिष्ठापन कर रहा है\n" #: ../bootloader.py:123 msgid "Bootloader" msgstr "बूटलोडर" #: ../bootloader.py:123 msgid "Installing bootloader..." msgstr "बूट लोडर अधिष्ठापित कर रहा है..." #: ../bootloader.py:192 msgid "" "No kernel packages were installed on your system. Your boot loader " "configuration will not be changed." msgstr "" "आपके सिस्टम पर कोई कर्नल संकुल अधिष्ठापित नहीं था. आपका बूटलोडर विन्यास बदला नहीं " "जाएगा." #: ../cmdline.py:44 msgid "Completed" msgstr "समाप्त" #: ../cmdline.py:52 msgid "In progress... " msgstr "प्रगति में..." #: ../cmdline.py:73 msgid "Can't have a question in command line mode!" msgstr "कमांड लाइन प्रकार में कोई प्रश्न नहीं रख सकता था!" #: ../cmdline.py:92 msgid "Parted exceptions can't be handled in command line mode!" msgstr "कमांड लाइन प्रकार में विभाजित अपवादों को संभाला नहीं जा सकता!" #: ../cmdline.py:137 #, python-format msgid "Done [%d/%d]" msgstr "[%d/%d] संपन्न" #: ../cmdline.py:143 #, python-format msgid "Installing %s-%s-%s... " msgstr "%s-%s-%s का अधिष्ठापन हो रहा है... " #: ../constants.py:60 #, python-format msgid "" "An unhandled exception has occurred. This is most likely a bug. Please " "save a copy of the detailed exception and file a bug report against anaconda " "at %s" msgstr "" "एक अनियंत्रित अपवाद घटित हुआ. ज्यादा संभावना यह एक दोष है. कृपया इस अपवाद के पूरे पाठ " "को प्रतिलिपि करें और एनाकोंडा में एक विस्तारित दोष (बग) सूचना %s पर भेजें." #: ../exception.py:391 ../exception.py:408 msgid "Dump Written" msgstr "संनिक्षेप लिखा गया" #: ../exception.py:392 msgid "" "Your system's state has been successfully written to the floppy. Your system " "will now be rebooted." msgstr "" "आपके सिस्टम की स्थिति सफलता पूर्वक फ्लॉपी पर लिखी जा चुकी है. आपका सिस्टम अब पुनःआरंभ " "होगा." #: ../exception.py:395 ../exception.py:412 ../fsset.py:2427 ../gui.py:806 #: ../gui.py:977 ../harddrive.py:70 ../image.py:93 ../image.py:427 #: ../image.py:490 ../packages.py:379 ../yuminstall.py:174 #: ../iw/confirm_gui.py:32 ../textw/confirm_text.py:38 #: ../textw/confirm_text.py:66 msgid "_Reboot" msgstr "रीबूट करें (_R)" #: ../exception.py:400 ../exception.py:417 msgid "Dump Not Written" msgstr "संनिक्षेप नहीं लिखा गया" #: ../exception.py:401 msgid "There was a problem writing the system state to the floppy." msgstr "फ्लॉपी में सिस्टम स्थिति को लिखने में समस्या थी." #: ../exception.py:409 msgid "" "Your system's state has been successfully written to the remote host. Your " "system will now be rebooted." msgstr "आपके सिस्टम की स्थिति सफलता पूर्वक दूरस्थ मेजबान पर लिखी जा चुकी है. आपका सिस्टम अब पुनः बूट किया जायेगा." #: ../exception.py:418 msgid "There was a problem writing the system state to the remote host." msgstr "दूरस्थ मेजबान में सिस्टम स्थिति लिखने में समस्या थी." #: ../fsset.py:216 msgid "Checking for Bad Blocks" msgstr "बुरे खण्डों के लिए जांच रहा है" #: ../fsset.py:217 #, python-format msgid "Checking for bad blocks on /dev/%s..." msgstr "/dev/%s पर बुरे खण्डों के लिए जांच रहा है..." #: ../fsset.py:644 ../fsset.py:1438 ../fsset.py:1469 ../fsset.py:1530 #: ../fsset.py:1541 ../fsset.py:1594 ../fsset.py:1605 ../fsset.py:1640 #: ../fsset.py:1690 ../fsset.py:1734 ../fsset.py:1753 ../image.py:134 #: ../image.py:167 ../image.py:297 ../partedUtils.py:721 #: ../partIntfHelpers.py:403 ../yuminstall.py:147 ../yuminstall.py:614 #: ../yuminstall.py:674 ../yuminstall.py:847 ../iw/osbootwidget.py:216 #: ../iw/osbootwidget.py:225 ../iw/raid_dialog_gui.py:605 #: ../iw/raid_dialog_gui.py:644 ../textw/upgrade_text.py:162 #: ../textw/upgrade_text.py:169 ../loader2/cdinstall.c:137 #: ../loader2/cdinstall.c:450 ../loader2/driverdisk.c:334 #: ../loader2/driverdisk.c:372 ../loader2/driverdisk.c:400 #: ../loader2/driverdisk.c:472 ../loader2/hdinstall.c:104 #: ../loader2/hdinstall.c:155 ../loader2/hdinstall.c:214 #: ../loader2/hdinstall.c:432 ../loader2/hdinstall.c:536 #: ../loader2/hdinstall.c:579 ../loader2/hdinstall.c:592 #: ../loader2/kickstart.c:273 ../loader2/lang.c:101 ../loader2/loader.c:353 #: ../loader2/loader.c:760 ../loader2/mediacheck.c:329 #: ../loader2/mediacheck.c:387 ../loader2/method.c:153 ../loader2/method.c:372 #: ../loader2/method.c:457 ../loader2/nfsinstall.c:127 #: ../loader2/nfsinstall.c:214 ../loader2/nfsinstall.c:223 #: ../loader2/telnetd.c:84 ../loader2/urlinstall.c:72 #: ../loader2/urlinstall.c:144 ../loader2/urlinstall.c:157 #: ../loader2/urls.c:181 ../loader2/urls.c:191 ../loader2/urls.c:200 #: ../loader2/urls.c:331 ../loader2/urls.c:336 msgid "Error" msgstr "त्रुटि" #: ../fsset.py:645 #, python-format msgid "" "An error occurred migrating %s to ext3. It is possible to continue without " "migrating this file system if desired.\n" "\n" "Would you like to continue without migrating %s?" msgstr "" "%s के ext3 में उत्प्रवासन करते समय एक त्रुटि सामने आई. यदि चाहें तो इस फाइल सिस्टम के " "उत्प्रवासन के बिना इसे जारी रखना संभव है.\n" "\n" "क्या आप %s में बिना उत्प्रवासन किए जारी रखना चाहते हैं?" #: ../fsset.py:1346 msgid "RAID Device" msgstr "RAID युक्ति" #: ../fsset.py:1350 ../fsset.py:1356 msgid "Apple Bootstrap" msgstr "एप्पल बूटस्ट्रेप" #: ../fsset.py:1361 ../partitions.py:869 msgid "PPC PReP Boot" msgstr "PPC PReP बूट" #: ../fsset.py:1364 msgid "First sector of boot partition" msgstr "बूट विभाजन का प्रथम खण्ड" #: ../fsset.py:1365 msgid "Master Boot Record (MBR)" msgstr "मास्टर बूट रिकार्ड (MBR)" #: ../fsset.py:1439 #, python-format msgid "" "An error occurred trying to initialize swap on device %s. This problem is " "serious, and the install cannot continue.\n" "\n" "Press to reboot your system." msgstr "" "%s युक्ति पर स्वैप का प्रारंभिकीकरण करते समय एक त्रुटि घटित हुआ. यह समस्या गंभीर है और " "अधिष्ठापन जारी नहीं हो सकता है.\n" "\n" "अपने सिस्टम को रिबूट करने के लिए दबायें." #: ../fsset.py:1468 ../rescue.py:287 ../rescue.py:289 #: ../textw/upgrade_text.py:120 ../loader2/cdinstall.c:257 #: ../loader2/cdinstall.c:259 ../loader2/method.c:419 msgid "Skip" msgstr "छोड़ें" #: ../fsset.py:1468 ../upgrade.py:57 ../textw/complete_text.py:47 msgid "Reboot" msgstr "रीबूट" #: ../fsset.py:1489 #, python-format msgid "" "The swap device:\n" "\n" " /dev/%s\n" "\n" "is a version 0 Linux swap partition. If you want to use this device, you " "must reformat as a version 1 Linux swap partition. If you skip it, the " "installer will ignore it during the installation." msgstr "" "स्वैप युक्ति:\n" "\n" " /dev/%s\n" "\n" "0 Linux स्वैप विभाजन का संस्करण है. अगर आप इस युक्ति का प्रयोग करना चाहते हैं, आपको जरूर एक संस्करण 1 Linux स्वैप विभाजन को फिर संरूपित करना चाहिये. अगर आफ इसे छोड़ते हैं, अधिष्ठापक इसे अधिष्ठापन के दौरान अनदेखा करेगा." #: ../fsset.py:1496 msgid "Reformat" msgstr "फिर संरूपित करें" #: ../fsset.py:1500 #, python-format msgid "" "The swap device:\n" "\n" " /dev/%s\n" "\n" "in your /etc/fstab file is currently in use as a software suspend partition, " "which means your system is hibernating. To perform an upgrade, please shut " "down your system rather than hibernating it." msgstr "" "स्वैप युक्ति:\n" "\n" " /dev/%s\n" "\n" "आपके /etc/fstab फाइल में अभी सॉफ्टवेयर स्थगन विभाजन के रूप में प्रयोग में है, " "जिसका मतलब है कि आपका सिस्टम सुप्तावस्था में है. उन्नयन करने के लिये, अपने सिस्टम को बजाय सुप्तावस्था में ले जाने के इसे बंद कीजिये." #: ../fsset.py:1508 #, python-format msgid "" "The swap device:\n" "\n" " /dev/%s\n" "\n" "in your /etc/fstab file is currently in use as a software suspend partition, " "which means your system is hibernating. If you are performing a new install, " "make sure the installer is set to to format all swap partitions." msgstr "" "स्वैप युक्ति:\n" "\n" " /dev/%s\n" "\n" "आपके /etc/fstab फाइल में अभी सॉफ्टवेयर स्थगन विभाजन के रूप में प्रयोग में है, " "जिसका मतलब है कि आपका सिस्टम सुप्तावस्था में है. अगर आप नया अधिष्ठापन कर रहे हैं, सुनिश्चित कीजिये कि अधिष्ठापक सारे स्वैप विभाजन के संरूपन के लिये सेट किया हुआ है." #: ../fsset.py:1518 msgid "" "\n" "\n" "Choose Skip if you want the installer to ignore this partition during the " "upgrade. Choose Format to reformat the partition as swap space. Choose " "Reboot to restart the system." msgstr "" "\n" "\n" "छोड़ें चुनें अगर आप अधिष्ठापक को उन्नयन के दौरान इस विभाजन को अनदेखा करना चाहते हैं. स्वैप स्थान के रूप में विभाजन संरूपित करने के लिये संरूपित करें चुनें." #: ../fsset.py:1524 ../iw/partition_gui.py:368 msgid "Format" msgstr "संरूपित करें" #: ../fsset.py:1531 #, python-format msgid "" "Error enabling swap device %s: %s\n" "\n" "The /etc/fstab on your upgrade partition does not reference a valid swap " "partition.\n" "\n" "Press OK to reboot your system." msgstr "" "%s स्वैप युक्ति को सक्रिय करने में त्रुटि: %s\n" "\n" "आपके उन्नत विभाजन पर /etc/fstab एक मान्य स्वैप विभाजन का संदर्भ नहीं लेता है.\n" "\n" "अपने सिस्टम को रीबूट करने के लिए 'ठीक' दबाएँ." #: ../fsset.py:1542 #, python-format msgid "" "Error enabling swap device %s: %s\n" "\n" "This most likely means this swap partition has not been initialized.\n" "\n" "Press OK to reboot your system." msgstr "" "%s स्वैप युक्ति को सक्रिय करने में त्रुटि: %s\n" "\n" "इसका सर्वाधिक संभाव्य अर्थ यह हो सकता है कि इस स्वैप विभाजन का प्रारंभिकीकरण नहीं किया " "गया था.\n" "\n" "अपने सिस्टम को रीबूट करने के लिए 'ठीक' दबाएँ." #: ../fsset.py:1595 #, python-format msgid "" "Bad blocks have been detected on device /dev/%s. We do not recommend you use " "this device.\n" "\n" "Press to reboot your system" msgstr "" "/dev/%s युक्ति पर बुरे खंड मिले हैं. हम अनुशंसा नहीं करते कि आप इस युक्ति का प्रयोग करें.\n" "\n" "अपने सिस्टम को रीबूट करने के लिए दबाएँ." #: ../fsset.py:1606 #, python-format msgid "" "An error occurred searching for bad blocks on %s. This problem is serious, " "and the install cannot continue.\n" "\n" "Press to reboot your system." msgstr "" "%s पर बुरे खंडों के लिए खोज करते समय एक त्रुटि घटित हुआ. यह समस्या गंभीर है, और अधिष्ठापन " "जारी नहीं हो सकता है.\n" "\n" "अपने सिस्टम को रीबूट करने के लिए दबाएँ." #: ../fsset.py:1641 #, python-format msgid "" "An error occurred trying to format %s. This problem is serious, and the " "install cannot continue.\n" "\n" "Press to reboot your system." msgstr "" "%s को संरूपित करने का प्रयास करते समय एक त्रुटि घटित हुआ. यह समस्या गंभीर है, और " "अधिष्ठापन जारी नहीं हो सकता.\n" "\n" "आपके सिस्टम को रीबूट करने के लिए दबाएँ." #: ../fsset.py:1691 #, python-format msgid "" "An error occurred trying to migrate %s. This problem is serious, and the " "install cannot continue.\n" "\n" "Press to reboot your system." msgstr "" "%s के उत्प्रवासन का प्रयास करते समय एक त्रुटि घटित हुआ. यह समस्या गंभीर है, और अधिष्ठापन " "जारी नहीं हो सकता है.\n" "\n" "अपने सिस्टम को रीबूट करने के लिए दबाएँ." #: ../fsset.py:1712 ../fsset.py:1721 msgid "Invalid mount point" msgstr "अमान्य आरोह बिंदु" #: ../fsset.py:1713 #, python-format msgid "" "An error occurred when trying to create %s. Some element of this path is " "not a directory. This is a fatal error and the install cannot continue.\n" "\n" "Press to reboot your system." msgstr "" "%s बनाने का प्रयास करते समय एक त्रुटि घटित हुआ. इस पथ का कुछ तत्व एक निर्देशिका नहीं है. " "यह एक घातक त्रुटि है और अधिष्ठापन जारी नहीं हो सकता है.\n" "\n" "अपने सिस्टम को रीबूट करने के लिए दबाएँ." #: ../fsset.py:1722 #, python-format msgid "" "An error occurred when trying to create %s: %s. This is a fatal error and " "the install cannot continue.\n" "\n" "Press to reboot your system." msgstr "" "%s को बनाने का प्रयास करते समय एक त्रुटि घटित हुआ: %s. यह एक घातक त्रुटि है अधिष्ठापन " "जारी नहीं हो सकता है. \n" "\n" "अपने सिस्टम को रीबूट करने के लिए दबाएं." #: ../fsset.py:1735 #, python-format msgid "" "Error mounting device %s as %s: %s\n" "\n" "This most likely means this partition has not been formatted.\n" "\n" "Press OK to reboot your system." msgstr "" "%s युक्ति को %s रूप में आरोहण करने में त्रुटि: %s\n" "\n" "इसका सर्वाधिक संभाव्य अर्थ यह हो सकता है कि विभाजन को संरूपित नहीं किया था.\n" "\n" "अपने सिस्टम को रिबूट करने के लिए 'ठीक' दबाएं." #: ../fsset.py:1754 msgid "" "Error finding / entry.\n" "\n" "This is most likely means that your fstab is incorrect.\n" "\n" "Press OK to reboot your system." msgstr "" "/ प्रविष्टि पाने में त्रुटि.\n" "\n" "इसका सर्वाधिक संभाव्य अर्थ यह हो सकता है कि आपका fstab सही नहीं है.\n" "\n" "आपके सिस्टम को रिबूट करने के लिए 'ठीक' दबाएं." #: ../fsset.py:2419 msgid "Duplicate Labels" msgstr "नकल लेबल" #: ../fsset.py:2420 #, python-format msgid "" "Multiple devices on your system are labelled %s. Labels across devices must " "be unique for your system to function properly.\n" "\n" "Please fix this problem and restart the installation process." msgstr "" "आपके सिस्टम पर बहु युक्तियों को %s लेबल दिया गया है. आपके सिस्टम को ठीक तरह से कार्य करने " "के लिए युक्तियों का लेबल अद्वितीय होना जरुरी है.\n" "\n" "कृपया इस समस्या को ठीक करें और अधिष्ठापन प्रक्रिया को पुनः प्रारंभ करें." #: ../fsset.py:2680 msgid "Formatting" msgstr "संरूपित कर रहा है" #: ../fsset.py:2681 #, python-format msgid "Formatting %s file system..." msgstr "%s फाइल सिस्टम को संरूपित कर रहा है..." #: ../gui.py:110 msgid "An error occurred copying the screenshots over." msgstr "स्क्रीनशॉट कॉपी करने में एक त्रुटि घटित हुआ. " #: ../gui.py:122 msgid "Screenshots Copied" msgstr "स्क्रीनशीट कॉपी की गई" #: ../gui.py:123 msgid "" "The screenshots have been saved into the directory:\n" "\n" "\t/root/anaconda-screenshots/\n" "\n" "You can access these when you reboot and login as root." msgstr "" "इस निर्देशिका में स्क्रीनशॉटों को सुरक्षित किया गया है:\n" "\n" "\t/root/anaconda-screenshots/\n" "\n" "रीबूट करके और रूट से लागिन करने से आप इसका अभिगम कर सकते हैं." #: ../gui.py:167 msgid "Saving Screenshot" msgstr "स्क्रीनशॉट सहेज रहा है" #: ../gui.py:168 #, python-format msgid "A screenshot named '%s' has been saved." msgstr "'%s' नामक स्क्रीनशॉट को सुरक्षित किया गया. " #: ../gui.py:171 msgid "Error Saving Screenshot" msgstr "स्क्रीनशॉट को सुरक्षित करने में त्रुटि" #: ../gui.py:172 msgid "" "An error occurred while saving the screenshot. If this occurred during " "package installation, you may need to try several times for it to succeed." msgstr "" "स्क्रीनशॉट को सुरक्षित करते समय एक त्रुटि घटित हुआ. यदि संकुल अधिष्ठापन के समय यह घटित " "हुआ है तो इसकी सफलता के लिए आपको कई बार प्रयास करना जरुरी हैं." #: ../gui.py:241 ../text.py:383 msgid "Fix" msgstr "सही" #: ../gui.py:242 ../rescue.py:193 ../text.py:384 ../upgrade.py:57 #: ../textw/bootloader_text.py:69 ../textw/constants_text.py:48 #: ../loader2/driverdisk.c:515 ../loader2/driverdisk.c:526 #: ../loader2/hdinstall.c:327 ../loader2/loader.c:396 msgid "Yes" msgstr "हां" #: ../gui.py:243 ../rescue.py:193 ../rescue.py:195 ../text.py:385 #: ../textw/bootloader_text.py:69 ../textw/constants_text.py:52 #: ../loader2/driverdisk.c:515 ../loader2/driverdisk.c:526 #: ../loader2/loader.c:396 msgid "No" msgstr "नहीं" #: ../gui.py:245 ../text.py:387 ../loader2/net.c:294 ../loader2/net.c:613 msgid "Retry" msgstr "पुनःप्रयास करें" #: ../gui.py:246 ../text.py:388 msgid "Ignore" msgstr "छोड़ें" #: ../gui.py:247 ../gui.py:711 ../partIntfHelpers.py:233 #: ../partIntfHelpers.py:526 ../text.py:103 ../text.py:104 ../text.py:360 #: ../text.py:362 ../text.py:389 ../iw/bootloader_advanced_gui.py:47 #: ../textw/bootloader_text.py:199 ../textw/constants_text.py:40 #: ../loader2/dirbrowser.c:139 ../loader2/driverdisk.c:270 #: ../loader2/loader.c:342 msgid "Cancel" msgstr "रद्द करें" #: ../gui.py:801 ../text.py:346 #, python-format msgid "" "The following error was found while parsing your kickstart configuration:\n" "\n" "%s" msgstr "" "किकस्टार्ट विन्यास का विश्लेषण करने के दौरान निम्नलिखित त्रुटियां पाई गई:\n" "\n" "%s" #: ../gui.py:803 ../text.py:348 msgid "Error Parsing Kickstart Config" msgstr "किकस्टार्ट विन्यास विश्लेषण करने में त्रुटि" #: ../gui.py:811 ../text.py:358 msgid "" "Please insert a floppy now. All contents of the disk will be erased, so " "please choose your diskette carefully." msgstr "" "कृपया अब एक फ्लापी डालें. डिस्क की सभी सामग्री मिट चुकी हैं, इसलिए अपना डिस्केट " "सावधानीपूर्वक चुनें." #: ../gui.py:872 msgid "default:LTR" msgstr "default:LTR" #: ../gui.py:964 msgid "Error!" msgstr "त्रुटि!" #: ../gui.py:965 #, python-format msgid "" "An error occurred when attempting to load an installer interface component.\n" "\n" "className = %s" msgstr "" "एक अधिष्ठापक अंतरफलक घटक को भारित करने का प्रयास करते समय एक त्रुटि घटित हुआ.\n" "\n" "वर्गनाम = %s" #: ../gui.py:969 ../gui.py:974 ../packages.py:371 ../packages.py:376 #: ../yuminstall.py:680 msgid "_Exit" msgstr "निकास (_E)" #: ../gui.py:970 ../yuminstall.py:161 msgid "_Retry" msgstr "पुनःप्रयास करें (_R)" #: ../gui.py:973 ../packages.py:375 msgid "The installer will now exit..." msgstr "अधिष्ठापक अब बाहर निकल जायेगा..." #: ../gui.py:976 ../packages.py:378 msgid "Your system will now be rebooted..." msgstr "आपका सिस्टम अब रीबूट हो जाएगा..." #: ../gui.py:979 ../packages.py:380 msgid "Rebooting System" msgstr "सिस्टम को रीबूट कर रहा है" #: ../gui.py:1044 #, python-format msgid "%s Installer" msgstr "%s अधिष्ठापक" #: ../gui.py:1050 msgid "Unable to load title bar" msgstr "शीर्षक पट्टी भारित करने में असमर्थ" #: ../gui.py:1103 msgid "Install Window" msgstr "विंडो अधिष्ठापन" #: ../harddrive.py:61 ../image.py:480 msgid "Missing ISO 9660 Image" msgstr "गुम ISO 9660 चित्र" #: ../harddrive.py:62 #, python-format msgid "" "The installer has tried to mount image #%s, but cannot find it on the hard " "drive.\n" "\n" "Please copy this image to the drive and click Retry. Click Reboot to abort " "the installation." msgstr "" "अधिष्ठापक ने #%s चित्र को आरोहित करने का प्रयास किया है, लेकिन इसे ड्राइव पर नहीं पा " "सकता है.\n" "\n" "ड्राइव पर पर इस चित्र को कॉपी करें और फिर कोशिश करें को क्लिक करें. अधिष्ठापन रोकने के लिये रिबूट क्लिक करें." #: ../harddrive.py:71 ../image.py:491 msgid "Re_try" msgstr "पुनःप्रयास करें (_t)" #: ../image.py:84 msgid "Required Install Media" msgstr "जरूरी अधिष्ठापन मीडिया" #: ../image.py:85 #, python-format msgid "" "The software you have selected to install will require the following CDs:\n" "\n" "%s\n" "Please have these ready before proceeding with the installation. If you " "need to abort the installation and reboot please select \"Reboot\"." msgstr "" "आपने जिस सॉफ्टवेयर को अधिष्ठापित करने के लिए चुना है, उसके लिए निम्नलिखित सीडी की जरूरत " "होगी:\n" "\n" "%s\n" "अधिष्ठापन आरंभ करने के पहले कृपया इन्हें तैयार रखें. अगर आपको अधिष्ठापन को स्थगित करके " "रिबूट करने की जरूरत है तो कृपया चुनें \"रिबूट\"." #: ../image.py:93 ../packages.py:376 ../packages.py:379 ../yuminstall.py:854 #: ../iw/confirm_gui.py:32 ../textw/confirm_text.py:38 #: ../textw/confirm_text.py:66 msgid "_Back" msgstr "पीछे (_B)" #: ../image.py:93 ../image.py:428 ../kickstart.py:916 ../kickstart.py:945 #: ../iw/partition_gui.py:1011 msgid "_Continue" msgstr "जारी रखें (_C)" #: ../image.py:135 #, python-format msgid "" "An error occurred unmounting the CD. Please make sure you're not accessing %" "s from the shell on tty2 and then click OK to retry." msgstr "" "CD का विरोहण करते समय एक त्रुटि घटित हुआ. कृपया निश्चित करें कि आप tty2 के शैल से %s का " "अभिगम नहीं कर रहे हैं और पुनःप्रयास के लिए 'ठीक' दबाएँ." #: ../image.py:157 msgid "Copying File" msgstr "फाइल कॉपी कर रहा है" #: ../image.py:158 msgid "Transferring install image to hard drive..." msgstr "अधिष्ठापन बिंव हार्ड ड्राइव पर स्थानांतरित कर रहा है..." #: ../image.py:168 msgid "" "An error occurred transferring the install image to your hard drive. You are " "probably out of disk space." msgstr "" "आपके हार्ड ड्राइव से अधिष्ठापन बिंव को स्थानांतरित करने में एक त्रुटि घटित हुआ. यह हो सकता " "है कि आपके डिस्क में पर्याप्त स्थान नहीं हैं. " #: ../image.py:255 msgid "Change CDROM" msgstr "CDROM बदलें" #: ../image.py:256 #, python-format msgid "Please insert %s disc %d to continue." msgstr "कृपया जारी रखने के लिए %s disc %d डालें." #: ../image.py:291 msgid "Wrong CDROM" msgstr "गलत CDROM " #: ../image.py:292 #, python-format msgid "That's not the correct %s CDROM." msgstr "वह सही %s CDROM नहीं है." #: ../image.py:298 msgid "Unable to access the CDROM." msgstr "CDROM चलाने में असमर्थ" #: ../image.py:481 #, python-format msgid "" "The installer has tried to mount image #%s, but cannot find it on the " "server.\n" "\n" "Please copy this image to the remote server's share path and click Retry. " "Click Reboot to abort the installation." msgstr "" "अधिष्ठापक ने #%s चित्र को आरोहित करने का प्रयास किया है, लेकिन इसे सर्वर पर नहीं पा " "सकता है.\n" "\n" "दूरस्थ सर्वर के शेयर पथ पर इस चित्र को कॉपी करें और फिर कोशिश करें को क्लिक करें. " "अधिष्ठापन रोकने के लिये रिबूट क्लिक करें." #: ../installclass.py:57 msgid "Install on System" msgstr "सिस्टम पर अधिष्ठापित करें" #: ../kickstart.py:74 msgid "Scriptlet Failure" msgstr "स्क्रिप्टलेट विफलता" #: ../kickstart.py:75 #, python-format msgid "" "There was an error running the scriptlet. You may examine the output in %" "s. This is a fatal error and your install will be aborted.\n" "\n" "Press the OK button to reboot your system." msgstr "" "स्क्रिप्टलेट को चलाने में त्रुटि था. आप आउटपुट को %s में जांच सकते हैं. यह गंभीर त्रुटि है और " "आपका अधिष्ठापन खत्म कर दिया जायेगा.\n" "\n" "अपने सिस्टम को रिबूट करने के लिये ठीक बटन दबायें." #: ../kickstart.py:751 ../kickstart.py:769 msgid "Running..." msgstr "चल रहा है..." #: ../kickstart.py:752 msgid "Running pre-install scripts" msgstr "पूर्व अधिष्ठापित स्क्रिप्ट चला रहा है" #: ../kickstart.py:770 msgid "Running post-install scripts" msgstr "उत्तर अधिष्ठापित स्क्रिप्ट चला रहा है" #: ../kickstart.py:908 msgid "Missing Package" msgstr "नहीं मिल रहा संकुल" #: ../kickstart.py:909 #, python-format msgid "" "You have specified that the package '%s' should be installed. This package " "does not exist. Would you like to continue or abort your installation?" msgstr "आपने निर्दिष्ट किया है कि संकुल '%s' अधिष्ठापित किया जाना चाहिये. यह समूह मौजूद नहीं है. क्या आप अपने अधिष्ठापन के साथ जारी रखना चाहेंगे या फिर रोक देना चाहेंगे?" #: ../kickstart.py:915 ../kickstart.py:944 msgid "_Abort" msgstr "स्थगित करें (_A)" #: ../kickstart.py:936 msgid "Missing Group" msgstr "गुम समूह" #: ../kickstart.py:937 #, python-format msgid "" "You have specified that the group '%s' should be installed. This group does " "not exist. Would you like to continue or abort your installation?" msgstr "आपने निर्दिष्ट किया है कि समूह '%s' अधिष्ठापित किया जाना चाहिये. यह समूह मौजूद नहीं है. क्या आप अपने अधिष्ठापन के साथ जारी रखना चाहेंगे या फिर रोक देना चाहेंगे?" #: ../network.py:46 msgid "Hostname must be 64 or less characters in length." msgstr "मेजबाननाम 64 या इससे कम संप्रतीकों का होना चाहिए." #: ../network.py:49 msgid "Hostname must start with a valid character in the range 'a-z' or 'A-Z'" msgstr "मेजबाननाम को 'a-z' या 'A-Z' सीमा में एक उचित संप्रतीक से अवश्य प्रारंभ होना चाहिए" #: ../network.py:54 msgid "Hostnames can only contain the characters 'a-z', 'A-Z', '-', or '.'" msgstr "मेजबाननाम में केवल 'a-z', 'A-Z', '-', या '.' संप्रतीक हो सकता है" #: ../packages.py:357 msgid "Warning! This is pre-release software!" msgstr "चेतावनी! यह विमोचन के पहले का सॉफ्टवेयर (बीटा) है!" #: ../packages.py:358 #, python-format msgid "" "Thank you for downloading this pre-release of %s.\n" "\n" "This is not a final release and is not intended for use on production " "systems. The purpose of this release is to collect feedback from testers, " "and it is not suitable for day to day usage.\n" "\n" "To report feedback, please visit:\n" "\n" " %s\n" "\n" "and file a report against '%s'.\n" msgstr "" "इस %s बीटा के डाउनलोडिंग के लिए धन्यवाद.\n" "\n" "यह अंतिम विमोचन नहीं है और ना ही उत्पादन सिस्टमों के प्रयोग करने के इरादे से लाया गया है. " "इसका उद्देश्य जाँचकर्ताओं से प्रतिक्रिया इकट्ठा करना है और यह दैनन्दिन प्रयोग के लिए ठीक " "नहीं.है.\n" "प्रतिक्रिया देने के लिए, कृपया जायें:\n" "\n" " %s\n" "\n" "और '%s' मार्फत रिपोर्ट दर्ज करें.\n" #: ../packages.py:371 msgid "_Install anyway" msgstr "किसी तरह अधिष्ठापित करें (_I)" #: ../partedUtils.py:206 ../textw/partition_text.py:558 msgid "Foreign" msgstr "विदेश" #: ../partedUtils.py:306 #, python-format msgid "" "The device %s is LDL formatted instead of CDL formatted. LDL formatted " "DASDs are not supported for usage during an install of %s. If you wish to " "use this disk for installation, it must be re-initialized causing the loss " "of ALL DATA on this drive.\n" "\n" "Would you like to reformat this DASD using CDL format?" msgstr "" "युक्ति %s CDL संरुपित के स्थान पर LDL संरुपित है. %s के अधिष्ठापन के समय प्रयोग के लिए LDL " "संरुपित DASDs सहायक नहीं है. यदि आप अधिष्ठापन के लिए इस डिस्क का प्रयोग करना चाहें, इस " "चालन पर सारे आंकड़े को नष्ट करके इसे पुनःप्रारंभिकीकरण करना पड़ेगा.\n" "\n" "क्या आप CDL संरुप के प्रयोग से इस DASD का पुनःसंरुपण करना चाहेंगे?" #: ../partedUtils.py:336 #, python-format msgid "" "/dev/%s currently has a %s partition layout. To use this disk for the " "installation of %s, it must be re-initialized, causing the loss of ALL DATA " "on this drive.\n" "\n" "Would you like to format this drive?" msgstr "" "वर्तमान में /dev/%s के पास एक %s विभाजन ढ़ांचा है. %s के अधिष्ठापन के लिए इस डिस्क के " "प्रयोग हेतु, इसे पुनर्प्रारंभिकीकृत करना पड़ेगा, जिससे इस चालन के सभी आंकड़े नष्ट हो जाते हैं.\n" "\n" "क्या आप इस चालन का संरूपित करना चाहेंगे?" #: ../partedUtils.py:345 msgid "_Ignore drive" msgstr "चालन को अनदेखा करें (_I)" #: ../partedUtils.py:346 msgid "_Format drive" msgstr "चालन संरूपित करें (_F)" #: ../partedUtils.py:722 #, python-format msgid "Error mounting file system on %s: %s" msgstr "%s पर फाइल सिस्टम आरोहण करने में त्रुटि: %s" #: ../partedUtils.py:808 msgid "Initializing" msgstr "प्रारंभिकीकरण कर रहा है" #: ../partedUtils.py:809 #, python-format msgid "Please wait while formatting drive %s...\n" msgstr "कृपया %s चालन को संरूपित करते समय प्रतीक्षा करें...\n" #: ../partedUtils.py:911 #, python-format msgid "" "The partition table on device %s (%s) was unreadable. To create new " "partitions it must be initialized, causing the loss of ALL DATA on this " "drive.\n" "\n" "This operation will override any previous installation choices about which " "drives to ignore.\n" "\n" "Would you like to initialize this drive, erasing ALL DATA?" msgstr "" "%s (%s) उपकरण पर विभाजन तालिका अपठनीय था. नए विभाजनों को बनाने के लिए इसका " "प्रारंभिकीकरण करना आवश्यक है परिणामतः इस चालन के सारे आकड़े को नष्ट हो जाते हैं.\n" "\n" "यह संक्रिया किसी भी पुराने अधिष्ठापन चयनों को अध्यारोहित कर देगा जिसमें त्यागने योग्य " "चालन है.\n" "\n" "सभी आकड़े को मिटाकर क्या आप इस चालन का प्रारंभिकीकरण करना चाहेंगे?" #: ../partedUtils.py:968 #, python-format msgid "" "The partition table on device %s was unreadable. To create new partitions it " "must be initialized, causing the loss of ALL DATA on this drive.\n" "\n" "This operation will override any previous installation choices about which " "drives to ignore.\n" "\n" "Would you like to initialize this drive, erasing ALL DATA?" msgstr "" "%s युक्ति पर विभाजन तालिका पढ़ने में असमर्थ. नए विभाजनों को बनाने के लिए, इस चालन पर " "सारे आकड़े को नष्ठ करके, उनका प्रारंभिकीकरण होना आवश्यक है.\n" "\n" "यह संक्रिया किसी भी पुराने अधिष्ठापन चुनावों, जिसमें त्यागने योग्य चालन हैं, को अध्यारोहित " "कर देगा.\n" "\n" "सभी आकड़े को मिटाकर क्या आप इस चालन को अधिष्ठापित करना चाहेंगे?" #: ../partedUtils.py:1086 msgid "No Drives Found" msgstr "कोई भी चालन नहीं मिला" #: ../partedUtils.py:1087 msgid "" "An error has occurred - no valid devices were found on which to create new " "file systems. Please check your hardware for the cause of this problem." msgstr "" "एक त्रुटि घटित हुआ है - नए फाइल सिस्टमों को निर्मित करने के लिए उचित युक्तियां नहीं मिली. " "कृपया इस समस्या के कारण के लिए अपने हार्डवेयर को जांचें." #: ../partIntfHelpers.py:35 msgid "Please enter a volume group name." msgstr "कृपया एक वॉल्यूम ग्रूप नाम दाखिल करें." #: ../partIntfHelpers.py:39 msgid "Volume Group Names must be less than 128 characters" msgstr "वॉल्यूम ग्रूप नामों को 128 संप्रतीकों से कम होना जरुरी है." #: ../partIntfHelpers.py:42 #, python-format msgid "Error - the volume group name %s is not valid." msgstr "त्रुटि - %s वॉल्यूम ग्रूप नाम उचित नहीं है." #: ../partIntfHelpers.py:47 msgid "" "Error - the volume group name contains illegal characters or spaces. " "Acceptable characters are letters, digits, '.' or '_'." msgstr "" "त्रुटि - वॉल्यूम ग्रूप नाम में अवैध संप्रतीक या स्थान समाहित हैं. स्वीकार्य संप्रतीकों में अक्षर, " "अंक, '.' या '_' है." #: ../partIntfHelpers.py:57 msgid "Please enter a logical volume name." msgstr "कृपया एक लॉजिकल वॉल्यूम नाम दाखिल करें." #: ../partIntfHelpers.py:61 msgid "Logical Volume Names must be less than 128 characters" msgstr "लॉजिकल वॉल्यूम नामों को 128 संप्रतीकों से कम होना जरुरी है." #: ../partIntfHelpers.py:65 #, python-format msgid "Error - the logical volume name %s is not valid." msgstr "त्रुटि - %s लॉजिकल वॉल्यूम नाम उचित नहीं है." #: ../partIntfHelpers.py:71 msgid "" "Error - the logical volume name contains illegal characters or spaces. " "Acceptable characters are letters, digits, '.' or '_'." msgstr "" "त्रुटि - वॉल्यूम ग्रूप नाम में अवैध संप्रतीक या स्थान समाहित हैं. स्वीकार्य संप्रतीकों में अक्षर, " "अंक, '.' या '_' है." #: ../partIntfHelpers.py:95 #, python-format msgid "" "The mount point %s is invalid. Mount points must start with '/' and cannot " "end with '/', and must contain printable characters and no spaces." msgstr "" "आरोह बिंदु %s अमान्य है. आरोह बिंदु को '/' से शुरु होना ज़रूरी है और '/' से अंत नहीं हो " "सकता और मुद्रण योग्य संप्रतीक समाहित होना ज़रूरी है और खाली स्थान नहीं होना चाहिए." #: ../partIntfHelpers.py:102 msgid "Please specify a mount point for this partition." msgstr "कृपया इस विभाजन के लिए एक आरोह बिंदु निर्दिष्ट करें." #: ../partIntfHelpers.py:110 msgid "This partition is holding the data for the hard drive install." msgstr "हार्ड ड्राइव अधिष्ठापन के लिए यह विभाजन आंकड़ा रखे हुये है." #: ../partIntfHelpers.py:116 #, python-format msgid "This partition is part of the RAID device /dev/md%s." msgstr "यह विभाजन /dev/md%s RAID युक्ति का भाग है." #: ../partIntfHelpers.py:119 msgid "This partition is part of a RAID device." msgstr "यह विभाजन एक RAID युक्ति का भाग है." #: ../partIntfHelpers.py:124 #, python-format msgid "This partition is part of the LVM volume group '%s'." msgstr "यह विभाजन %s LVM वॉल्यूम ग्रूप का भाग है." #: ../partIntfHelpers.py:127 msgid "This partition is part of a LVM volume group." msgstr "यह विभाजन एक LVM वॉल्यूम ग्रूप का भाग है." #: ../partIntfHelpers.py:142 ../partIntfHelpers.py:150 #: ../partIntfHelpers.py:157 ../partIntfHelpers.py:167 #: ../partIntfHelpers.py:184 msgid "Unable To Delete" msgstr "मिटाने में असमर्थ" #: ../partIntfHelpers.py:143 msgid "You must first select a partition to delete." msgstr "मिटाने से पहले आपको एक विभाजन जरूर चुनना है." #: ../partIntfHelpers.py:151 msgid "You cannot delete free space." msgstr "आप मुक्त स्थान को मिटा नहीं सकते." #: ../partIntfHelpers.py:158 msgid "You cannot delete a partition of a LDL formatted DASD." msgstr "एक LDL संरुपित DASD के एक विभाजन को आप मिटा नहीं सकते." #: ../partIntfHelpers.py:168 #, python-format msgid "" "You cannot delete this partition, as it is an extended partition which " "contains %s" msgstr "आप यह विभाजन मिटा नहीं सकते, यह एक विस्तारित विभाजन है जिसमें %s समाहित है" #: ../partIntfHelpers.py:185 msgid "" "You cannot delete this partition:\n" "\n" msgstr "" "आप यह विभाजन मिटा नहीं सकते:\n" "\n" #: ../partIntfHelpers.py:229 ../partIntfHelpers.py:525 #: ../iw/lvm_dialog_gui.py:746 msgid "Confirm Delete" msgstr "मिटाना निश्चित करें" #: ../partIntfHelpers.py:230 #, python-format msgid "You are about to delete all partitions on the device '/dev/%s'." msgstr "'/dev/%s' युक्ति पर आप सभी विभाजनों को मिटाने जा रहे हैं." #: ../partIntfHelpers.py:233 ../partIntfHelpers.py:526 #: ../iw/lvm_dialog_gui.py:749 ../iw/lvm_dialog_gui.py:1101 #: ../iw/osbootwidget.py:104 ../iw/partition_gui.py:1358 msgid "_Delete" msgstr "मिटायें (_D)" #: ../partIntfHelpers.py:291 msgid "Notice" msgstr "सूचना" #: ../partIntfHelpers.py:292 #, python-format msgid "" "The following partitions were not deleted because they are in use:\n" "\n" "%s" msgstr "" "निम्नांकित विभाजनों को मिटाया नहीं गया था, क्योंकि वे प्रयोग में थे:\n" "\n" "%s" #: ../partIntfHelpers.py:308 ../partIntfHelpers.py:321 #: ../partIntfHelpers.py:347 ../partIntfHelpers.py:358 msgid "Unable To Edit" msgstr "संपादन करने में असमर्थ" #: ../partIntfHelpers.py:309 msgid "You must select a partition to edit" msgstr "आपको संपादन के लिए एक विभाजन चुनना जरूरी है" #: ../partIntfHelpers.py:321 ../partIntfHelpers.py:359 msgid "" "You cannot edit this partition:\n" "\n" msgstr "" "आप इस विभाजन का संपादन नहीं कर सकते:\n" "\n" #: ../partIntfHelpers.py:348 #, python-format msgid "" "You cannot edit this partition, as it is an extended partition which " "contains %s" msgstr "" "आप इस विभाजन का संपादन नहीं कर सकते, क्योंकि यह एक विस्तारित विभाजन है जिसमें %s " "समाहित है" #: ../partIntfHelpers.py:380 msgid "Format as Swap?" msgstr "स्वैप जैसा संरूपित करें?" #: ../partIntfHelpers.py:381 #, python-format msgid "" "/dev/%s has a partition type of 0x82 (Linux swap) but does not appear to be " "formatted as a Linux swap partition.\n" "\n" "Would you like to format this partition as a swap partition?" msgstr "" "/dev/%s के पास 0x82(Linux स्वैप) विभाजन प्रकार है किन्तु Linux स्वैप विभाजन की तरह " "संरुपित किया हुआ नहीं लगता है.\n" "\n" "क्या आप इस विभाजन को एक स्वैप विभाजन की तरह संरुपित करना चाहेंगे?" #: ../partIntfHelpers.py:401 #, python-format msgid "You need to select at least one hard drive to have %s installed onto." msgstr "आपको %s अधिष्ठापन करने के लिए कम से कम एक हार्ड ड्राइव अवश्य चुनना है." #: ../partIntfHelpers.py:407 msgid "" "You have chosen to use a pre-existing partition for this installation " "without formatting it. We recommend that you format this partition to make " "sure files from a previous operating system installation do not cause " "problems with this installation of Linux. However, if this partition " "contains files that you need to keep, such as home directories, then " "continue without formatting this partition." msgstr "" "आपने इस अधिष्ठापन के लिए बिना संरूपित किए एक पूर्व-उपस्थित विभाजन को उपयोग के लिए चुना " "है. हमारी अनुशंसा है कि आप इस विभाजन को संरूपित करें ताकि पूर्व ऑपरेटिंग सिस्टम अधिष्ठापन " "से फाइलें Linux के इस अधिष्ठापन के साथ समस्या नहीं करे. फिर भी, यदि इस विभाजन में आपकी " "आवश्यक फाइलें समाहित है, जैसे होम निर्देशिकाएँ, तो आपको इस विभाजन को बिना संरूपित किए " "जारी करना चाहिए." #: ../partIntfHelpers.py:415 msgid "Format?" msgstr "संरूपित करें?" #: ../partIntfHelpers.py:415 ../iw/partition_gui.py:1009 msgid "_Modify Partition" msgstr "विभाजन रूपांतरित करें (_M)" #: ../partIntfHelpers.py:415 msgid "Do _Not Format" msgstr "संरूपित न करें (_N)" #: ../partIntfHelpers.py:423 msgid "Error with Partitioning" msgstr "विभाजन में त्रुटि" #: ../partIntfHelpers.py:424 #, python-format msgid "" "The following critical errors exist with your requested partitioning scheme. " "These errors must be corrected prior to continuing with your install of %s.\n" "\n" "%s" msgstr "" "निम्नांकित गंभीर त्रुटि आपकी निवेदित विभाजन योजना के साथ उपस्थित है. इन त्रुटियों को आपके " "%s के अधिष्ठापन को जारी करने से पूर्व ठीक करना है.\n" "\n" "%s" #: ../partIntfHelpers.py:438 msgid "Partitioning Warning" msgstr "विभाजन चेतावनी" #: ../partIntfHelpers.py:439 #, python-format msgid "" "The following warnings exist with your requested partition scheme.\n" "\n" "%s\n" "\n" "Would you like to continue with your requested partitioning scheme?" msgstr "" "निम्नांकित चेतावनी आपके निवेदित विभाजन योजना के साथ उपस्थित है.\n" "\n" "%s\n" "\n" "क्या आप इसे अपने निवेदित विभाजन के साथ जारी रखना चाहेंगे?" #: ../partIntfHelpers.py:453 ../iw/partition_gui.py:665 msgid "" "The following pre-existing partitions have been selected to be formatted, " "destroying all data." msgstr "निम्नांकित पूर्व-उपस्थित विभाजन को सभी आंकड़े नष्ट करके संरूपित करने के लिए चुना गया है." #: ../partIntfHelpers.py:456 msgid "" "Select 'Yes' to continue and format these partitions, or 'No' to go back and " "change these settings." msgstr "" "जारी के लिए 'हाँ' चुनें और विभाजनों को संरूपित करें, या पीछे जाने के लिए 'नहीं' और इन " "जमावटों को बदलें." #: ../partIntfHelpers.py:462 msgid "Format Warning" msgstr "संरूप चेतावनी" #: ../partIntfHelpers.py:510 #, python-format msgid "" "You are about to delete the volume group \"%s\".\n" "\n" "ALL logical volumes in this volume group will be lost!" msgstr "" "आप \"%s\" वॉल्यूम ग्रूप मिटाने जा रहे हैं.\n" "\n" "इस वॉल्यूम ग्रूप में सभी लॉजिकल वॉल्यूम खो जायेगा!" #: ../partIntfHelpers.py:514 #, python-format msgid "You are about to delete the logical volume \"%s\"." msgstr "आप \"%s\" वॉल्यूम ग्रूप को मिटाने जा रहे हैं." #: ../partIntfHelpers.py:517 msgid "You are about to delete a RAID device." msgstr "आप एक RAID युक्ति को मिटाने जा रहे हैं. " #: ../partIntfHelpers.py:520 #, python-format msgid "You are about to delete the /dev/%s partition." msgstr "/dev/%s विभाजन को आप मिटाने जा रहे हैं." #: ../partIntfHelpers.py:523 msgid "The partition you selected will be deleted." msgstr "आपने जो विभाजन चुना था वह मिट जाएगा." #: ../partIntfHelpers.py:533 msgid "Confirm Reset" msgstr "पुनःजमावट निश्चित करें" #: ../partIntfHelpers.py:534 msgid "Are you sure you want to reset the partition table to its original state?" msgstr "क्या आप निश्चित हैं कि आप विभाजन तालिका को असली स्थिति में पुनःजमाना चाहते हैं ?" #: ../partitioning.py:57 msgid "Installation cannot continue." msgstr "अधिष्ठापन जारी नहीं रह सकता है." #: ../partitioning.py:58 msgid "" "The partitioning options you have chosen have already been activated. You " "can no longer return to the disk editing screen. Would you like to continue " "with the installation process?" msgstr "" "आपके द्वारा चयनित विभाजन विकल्प पहले से सक्रिय है. आप अब डिस्क संपादन स्क्रीन पर नहीं जा " "सकते. क्या आप अधिष्ठापन प्रक्रिया के साथ जारी रखना चाहेंगे?" #: ../partitioning.py:88 msgid "Low Memory" msgstr "अल्प स्मृति" #: ../partitioning.py:89 msgid "" "As you don't have much memory in this machine, we need to turn on swap space " "immediately. To do this we'll have to write your new partition table to the " "disk immediately. Is that OK?" msgstr "" "आपके पास इस मशीन के लिए पर्याप्त स्मृति उपलब्ध नहीं होने के कारण हमें स्वैप स्थान को तुरंत " "चालू करना पडेगा. ऐसा करने के लिए हमें डिस्क को विभाजन तालिका तुरंत लिखना होगा. क्या यह " "सही है?" #: ../partitions.py:804 #, python-format msgid "" "You have not defined a root partition (/), which is required for " "installation of %s to continue." msgstr "" "आपने एक रूट विभाजन (/) को परिभाषित नहीं किया है, जो कि %s के अधिषठान के जारी करने के " "लिए आवश्यक है." #: ../partitions.py:809 #, python-format msgid "" "Your root partition is less than 250 megabytes which is usually too small to " "install %s." msgstr "" "आपका रूट विभाजन 250 मेगाबाइट से भी कम हैं जो कि %s के अधिष्ठापन के लिए इतना छोटा है " "कि अधिष्ठापन नहीं हो सकता." #: ../partitions.py:816 msgid "You must create a /boot/efi partition of type FAT and a size of 50 megabytes." msgstr "आपको FAT प्रकार और 50 मेगाबाइट आकार का एक /boot/efi विभाजन अवश्य बनाना है." #: ../partitions.py:836 msgid "You must create an Apple Bootstrap partition." msgstr "आपको एक एप्पल बूटस्ट्रैप विभाजन अवश्य बनाना चाहिये." #: ../partitions.py:858 msgid "You must create a PPC PReP Boot partition." msgstr "आपको एक PPC PReP बूट विभाजन अवश्य बनाना है." #: ../partitions.py:866 ../partitions.py:877 #, python-format msgid "" "Your %s partition is less than %s megabytes which is lower than recommended " "for a normal %s install." msgstr "" "आपका %s विभाजन %s मेगाबाइट से कम है जो कि साधारण %s अधिष्ठापन के लिए अनुशंसित से कम " "है." #: ../partitions.py:911 msgid "Installing on a USB device. This may or may not produce a working system." msgstr "USB युक्ति पर अधिष्ठापित कर रहा है. यह कार्यशील सिस्टम उत्पन्न कर सकता है या नहीं भी." #: ../partitions.py:914 msgid "" "Installing on a FireWire device. This may or may not produce a working " "system." msgstr "FireWire युक्ति पर अधिष्ठापित कर रहा है. यह कार्यशील सिस्टम उत्पन्न कर सकता है या नहीं भी." #: ../partitions.py:923 ../partRequests.py:675 msgid "Bootable partitions can only be on RAID1 devices." msgstr "बूट करने योग्य विभाजन केवल RAID1 युक्तियों पर हो सकता है." #: ../partitions.py:930 msgid "Bootable partitions cannot be on a logical volume." msgstr "बूट करने योग्य विभाजन एक लॉजिकल वॉल्यूम पर नहीं हो सकता है." #: ../partitions.py:948 msgid "" "You have not specified a swap partition. Although not strictly required in " "all cases, it will significantly improve performance for most installations." msgstr "" "आपने एक स्वैप विभाजन निर्दिष्ट नहीं किया है. यद्यपि सभी स्थितियों में जरूरी नहीं हैं, अधिक " "अधिष्ठापन के लिए यह उत्पादकता बढ़ा देता है." #: ../partitions.py:955 #, python-format msgid "" "You have specified more than 32 swap devices. The kernel for %s only " "supports 32 swap devices." msgstr "" "आपने 32 स्वैप युक्तियों से अधिक निर्दिष्ट किया है. %s के लिए कर्नल केवल 32 स्वैप युक्तियों की " "सहायता करता है." #: ../partitions.py:966 #, python-format msgid "" "You have allocated less swap space (%dM) than available RAM (%dM) on your " "system. This could negatively impact performance." msgstr "" "आपके सिस्टम पर उपलब्ध (%dM) RAM से कम स्वैप स्थान (%dM) आपने दिया है. यह उत्पादकता पर " "एक ऋणात्मक प्रभाव दे सकता है." #: ../partitions.py:1266 msgid "the partition in use by the installer." msgstr "अधिष्ठापक के द्वारा प्रयोग किया जाने वाला विभाजन." #: ../partitions.py:1269 msgid "a partition which is a member of a RAID array." msgstr "एक विभाजन जो RAID सरणी का सदस्य है." #: ../partitions.py:1272 msgid "a partition which is a member of a LVM Volume Group." msgstr "एक विभाजन जो LVM वॉल्यूम ग्रूप का सदस्य है." #: ../partRequests.py:249 #, python-format msgid "This mount point is invalid. The %s directory must be on the / file system." msgstr "यह आरोह बिंदु अमान्य है. / फाइल सिस्टम पर %s निर्देशिका को अवश्य होना है." #: ../partRequests.py:252 #, python-format msgid "" "The mount point %s cannot be used. It must be a symbolic link for proper " "system operation. Please select a different mount point." msgstr "" "%s आरोह बिंदु का प्रयोग नहीं किया जा सकता है. उचित सिस्टम संक्रिया के लिए यह जरूर एक " "सांकेतिक लिंक है. कृपया एक दूसरा आरोह बिंदु चुनें." #: ../partRequests.py:259 msgid "This mount point must be on a linux file system." msgstr "इस आरोह बिंदु को एक Linux फाइल सिस्टम पर अवश्य होना चाहिए." #: ../partRequests.py:280 #, python-format msgid "" "The mount point \"%s\" is already in use, please choose a different mount " "point." msgstr "\"%s\" आरोह बिंदु पहले से प्रयोग में है, कृपया एक दूसरा आरोह बिंदु चुनें." #: ../partRequests.py:294 #, python-format msgid "" "The size of the %s partition (%10.2f MB) exceeds the maximum size of %10.2f " "MB." msgstr "%s विभाजन का आकार (%10.2f MB) %10.2f MB के अधिकतम आकार से भी अधिक है." #: ../partRequests.py:490 #, python-format msgid "" "The size of the requested partition (size = %s MB) exceeds the maximum size " "of %s MB." msgstr "निवेदित विभाजन का आकार (आकार = %s MB), %s MB के अधिकतम आकार से भी अधिक है." #: ../partRequests.py:495 #, python-format msgid "The size of the requested partition is negative! (size = %s MB)" msgstr "निवेदित विभाजन का आकार ऋणात्मक है! (आकार = %s MB)" #: ../partRequests.py:499 msgid "Partitions can't start below the first cylinder." msgstr "विभाजन प्रथम सिलेण्डर के नीचे से प्रारंभ नहीं हो सकता है." #: ../partRequests.py:502 msgid "Partitions can't end on a negative cylinder." msgstr "विभाजन ऋणात्मक सिलेण्डर पर समाप्त नहीं कर सकता." #: ../partRequests.py:667 msgid "No members in RAID request, or not RAID level specified." msgstr "RAID आग्रह में कोई सदस्य नहीं है, या RAID स्तर निर्दिष्ट नहीं किया गया." #: ../partRequests.py:679 #, python-format msgid "A RAID device of type %s requires at least %s members." msgstr "एक %s प्रकार की RAID युक्ति को कम से कम %s सदस्यों की आवश्यकता है." #: ../partRequests.py:688 #, python-format msgid "" "This RAID device can have a maximum of %s spares. To have more spares you " "will need to add members to the RAID device." msgstr "" "इस RAID युक्ति में अधिकतम %s स्पेयर्स हो सकते हैं. अधिक स्पेयर्स को रखने के लिए आपको RAID " "युक्ति में सदस्यों को जोड़ना पड़ेगा." #: ../rescue.py:129 msgid "Starting Interface" msgstr "अंतरफलक आरंभ कर रहा है" #: ../rescue.py:130 #, python-format msgid "Attempting to start %s" msgstr "%s प्रारंभ करने का प्रयास कर रहा है" #: ../rescue.py:191 msgid "Setup Networking" msgstr "संजाल व्यवस्थित करें" #: ../rescue.py:192 msgid "Do you want to start the network interfaces on this system?" msgstr "क्या आप इस सिस्टम पर संजाल अंतरफलकों को प्रारंभ करना चाहते हैं?" #: ../rescue.py:237 ../text.py:528 msgid "Cancelled" msgstr "रद्द किया" #: ../rescue.py:238 ../text.py:529 msgid "I can't go to the previous step from here. You will have to try again." msgstr "यहां से मैं पिछले चरण पर नहीं जा पा रहा हूँ. आपको पुनःप्रयास करना पड़ेगा." #: ../rescue.py:256 ../rescue.py:292 ../rescue.py:461 msgid "When finished please exit from the shell and your system will reboot." msgstr "जब समाप्त हो, कृपया शैल से बाहर निकलें और आपका सिस्टम रीबूट होगा." #: ../rescue.py:276 ../rescue.py:345 ../rescue.py:353 ../rescue.py:436 msgid "Rescue" msgstr "बचाव" #: ../rescue.py:277 #, python-format msgid "" "The rescue environment will now attempt to find your Linux installation and " "mount it under the directory %s. You can then make any changes required to " "your system. If you want to proceed with this step choose 'Continue'. You " "can also choose to mount your file systems read-only instead of read-write " "by choosing 'Read-Only'.\n" "\n" "If for some reason this process fails you can choose 'Skip' and this step " "will be skipped and you will go directly to a command shell.\n" "\n" msgstr "" "बचाव वातावरण अब आपके Linux अधिष्ठापन को खोजने का प्रयत्न करेगा और %s निर्देशका के " "अंतर्गत आरोह करेगा. तब अपने सिस्टम के लिए आवश्यक कोई बदलाव आप कर सकते हैं. यदि आप इस " "चरण के साथ आगे बढ़ना चाहते हैं तो चुनें 'जारी रखें'. साथ ही आप 'केवल-पढ़ें' के रूप में चुनकर अपने " "फाइल सिस्टम को 'लिखें-पढ़ें' के बदले में 'केवल-पढ़ें' रूप में आरोह करने के लिए चुन सकते हैं.\n" "\n" "यदि कुछ कारण से यह प्रक्रम असफल हो जाता हैं, आप \"छोड़ें\" चुन सकते हैं और यह चरण छूट " "जाएगा और आप सीधे कमांड शैल जाएँगे.\n" "\n" #: ../rescue.py:287 ../iw/partition_gui.py:567 ../loader2/cdinstall.c:109 #: ../loader2/cdinstall.c:117 ../loader2/driverdisk.c:473 msgid "Continue" msgstr "जारी" #: ../rescue.py:287 ../rescue.py:296 msgid "Read-Only" msgstr "केवल-पढ़ें" #: ../rescue.py:319 msgid "System to Rescue" msgstr "बचाने के लिये सिस्टम" #: ../rescue.py:320 msgid "What partition holds the root partition of your installation?" msgstr "कौन सा विभाजन आपके अधिष्ठापन के रूट विभाजन को रखे हुये है?" #: ../rescue.py:322 ../rescue.py:326 msgid "Exit" msgstr "निकास" #: ../rescue.py:346 msgid "" "Your system had dirty file systems which you chose not to mount. Press " "return to get a shell from which you can fsck and mount your partitions. " "The system will reboot automatically when you exit from the shell." msgstr "" "आपके सिस्टम में गंदी फाइल सिस्टम हैं, जिन्हें आप आरोहित करना नहीं चाहते हैं. शेल प्राप्त करने के " "लिए रिटर्न दबाएँ जिससे आप fsck और अपने विभाजनों को आरोहित कर सकते हैं. शैल से बाहर जाते " "ही सिस्टम स्वतः रीबूट हो जाएगा." #: ../rescue.py:354 #, python-format msgid "" "Your system has been mounted under %s.\n" "\n" "Press to get a shell. If you would like to make your system the " "root environment, run the command:\n" "\n" "\tchroot %s\n" "\n" "The system will reboot automatically when you exit from the shell." msgstr "" "आपका सिस्टम %s के अन्तर्गत आरोहित हो चुका है.\n" "\n" "शैल प्राप्त करने के लिए दबाएँ. यदि आप अपने सिस्टम को रूट वातावरण बनाना चाहते " "हैं, तो कमांड चलाएँ:\n" "\n" "\tchroot %s\n" "\n" "शेल से बाहर जाते ही सिस्टम स्वतः रीबूट हो जाएगा." #: ../rescue.py:437 #, python-format msgid "" "An error occurred trying to mount some or all of your system. Some of it may " "be mounted under %s.\n" "\n" "Press to get a shell. The system will reboot automatically when you " "exit from the shell." msgstr "" "आपके सिस्टम के सभी या कुछ के आरोहण के प्रयास करते समय एक त्रुटि घटित हुआ. %s के अंतर्गत कुछ " "आरोहित हो सकता है.\n" "\n" "शैल प्राप्त करने के लिए दबाएं. शैल से बाहर निकलते ही सिस्टम स्वतः ही रिबूट हो " "जाएगा." #: ../rescue.py:443 msgid "Rescue Mode" msgstr "बचाव प्रकार" #: ../rescue.py:444 msgid "" "You don't have any Linux partitions. Press return to get a shell. The system " "will reboot automatically when you exit from the shell." msgstr "" "आपके पास कोई Linux विभाजन नहीं हैं. एक शैल प्राप्त करने के लिए रिटर्न दबाएँ. शैल से बाहर " "निकलते ही सिस्टम स्वतः रिबूट हो जाएगा." #: ../rescue.py:458 #, python-format msgid "Your system is mounted under the %s directory." msgstr "%s निर्देशिका के अंतर्गत आपका सिस्टम आरोहित है." #: ../text.py:150 ../text.py:165 msgid "Save" msgstr "सहेजें" #: ../text.py:153 ../text.py:167 msgid "Remote" msgstr "दूरस्थ" #: ../text.py:155 ../text.py:163 msgid "Debug" msgstr "दोषमार्जन" #: ../text.py:159 msgid "Exception Occurred" msgstr "अपवाद घटित हुआ" #: ../text.py:188 msgid "Save to Remote Host" msgstr "दूरस्थ मेजबान सहेजें" #: ../text.py:191 msgid "Host" msgstr "मेजबान" #: ../text.py:193 msgid "Remote path" msgstr "दूरस्थ पथ" #: ../text.py:195 msgid "User name" msgstr "उपयोक्ता नाम" #: ../text.py:197 msgid "Password" msgstr "शब्दकूट" #: ../text.py:254 msgid "Help not available" msgstr "सहायता उपलब्ध नहीं है" #: ../text.py:255 msgid "No help is available for this step of the install." msgstr "अधिष्ठापन के इस चरण के लिए सहायता उपलब्ध नहीं है." #: ../text.py:357 msgid "Save Crash Dump" msgstr "क्रैश संन्निक्षेप को सहेजें" #: ../text.py:411 ../loader2/lang.c:50 ../loader2/loader.c:145 #, c-format, python-format msgid "Welcome to %s" msgstr "%s में स्वागत है" #: ../text.py:418 msgid " for help | between elements | selects | next screen" msgstr " सहायता के लिए | तत्वों के बीच | चुनते हैं | अगला स्क्रीन" #: ../text.py:420 msgid "" " / between elements | selects | next " "screen" msgstr " / तत्वों के बीच | चुनते हैं | अगला स्क्रीन" #: ../upgradeclass.py:20 msgid "Upgrade Existing System" msgstr "मौजूदा सिस्टम का उन्नयन करें" #: ../upgradeclass.py:24 msgid "Upgrade" msgstr "उन्नयन करें" #: ../upgrade.py:50 msgid "Proceed with upgrade?" msgstr "उन्नयन के साथ बढ़ें?" #: ../upgrade.py:51 msgid "" "The file systems of the Linux installation you have chosen to upgrade have " "already been mounted. You cannot go back past this point. \n" "\n" msgstr "" "आपके द्वारा उन्नयन के लिए चयनित Linux अधिष्ठापन के फाइल सिस्टमों का पहले से आरोहण है. " "आप इस स्थान के पीछे नहीं जा सकते. \n" "\n" #: ../upgrade.py:55 msgid "Would you like to continue with the upgrade?" msgstr "क्या आप उन्नयन के साथ जारी रखना चाहते हैं?" #: ../upgrade.py:92 msgid "Searching" msgstr "खोज रहा है" #: ../upgrade.py:93 #, python-format msgid "Searching for %s installations..." msgstr "%s अधिष्ठापनों के लिए खोज रहा है..." #: ../upgrade.py:145 ../upgrade.py:153 msgid "Dirty File Systems" msgstr "गंदी फाइल सिस्टम" #: ../upgrade.py:146 #, python-format msgid "" "The following file systems for your Linux system were not unmounted " "cleanly. Please boot your Linux installation, let the file systems be " "checked and shut down cleanly to upgrade.\n" "%s" msgstr "" "आपके Linux सिस्टम के लिए निम्नांकित फाइल सिस्टमों को सफाई से अनारोहित नहीं किया गया " "था. कृपया आपके Linux अधिष्ठापन को बूट करें, फाइल सिस्टम का परीक्षण होने दें और उन्नयन के " "लिए शटडाउन करें.\n" "%s" #: ../upgrade.py:154 #, python-format msgid "" "The following file systems for your Linux system were not unmounted " "cleanly. Would you like to mount them anyway?\n" "%s" msgstr "" "आपके Linux सिस्टम के लिए निम्नांकित फाइल सिस्टमों को स्पष्ट रूप से अनारोहित नहीं किया " "था. क्या फिर भी आप आरोहण करना चाहेंगे?\n" "%s" #: ../upgrade.py:291 ../upgrade.py:297 msgid "Mount failed" msgstr "आरोहण असफल" #: ../upgrade.py:292 msgid "" "One or more of the file systems listed in the /etc/fstab on your Linux " "system cannot be mounted. Please fix this problem and try to upgrade again." msgstr "" "आपके Linux सिस्टम के /etc/fstab में सूचीबद्ध एक या अधिक फाइल सिस्टमों को आरोहित नहीं " "किया जा सकता. कृपया यह समस्या ठीक करें और फिर से उन्नयन का प्रयास करें." #: ../upgrade.py:298 msgid "" "One or more of the file systems listed in the /etc/fstab of your Linux " "system are inconsistent and cannot be mounted. Please fix this problem and " "try to upgrade again." msgstr "" "आपके Linux सिस्टम के /etc/fstab में सूचीबद्ध एक या अधिक फाइल सिस्टम असंगत हैं और उसे " "आरोहित नहीं किया जा सकता. कृपया यह समस्या ठीक करें और फिर से उन्नयन का प्रयास करें." #: ../upgrade.py:315 msgid "" "The following files are absolute symbolic links, which we do not support " "during an upgrade. Please change them to relative symbolic links and restart " "the upgrade.\n" "\n" msgstr "" "निम्नांकित फाइल निरपेक्ष सांकेतिक लिंक है, जिसका हम उन्नयन के समय समर्थन नहीं करते. कृपया " "उसे सापेक्षिक चिह्नित कड़ी में बदलें और उन्नयन पुनःप्रारंभ करें.\n" "\n" #: ../upgrade.py:321 msgid "Absolute Symlinks" msgstr "निरपेक्ष Symlinks" #: ../upgrade.py:332 msgid "" "The following are directories which should instead be symbolic links, which " "will cause problems with the upgrade. Please return them to their original " "state as symbolic links and restart the upgrade.\n" "\n" msgstr "" "निम्नांकित निर्देशिकाएँ है जिसे निरपेक्ष सांकेतिक लिंक होना चाहिए था, जो उन्नयन के साथ " "समस्या कर सकती है. कृपया सांकेतिक लिंक को उनकी मूल अवस्था में उन्हें वापस करें और उन्नयन " "पुनःप्रारंभ करें.\n" "\n" #: ../upgrade.py:338 msgid "Invalid Directories" msgstr "अमान्य निर्देशिकाएँ" #: ../upgrade.py:345 #, python-format msgid "%s not found" msgstr "%s नहीं मिला" #: ../urlinstall.py:35 msgid "Connecting..." msgstr "जोड़ रहा है..." #: ../vnc.py:43 msgid "Unable to Start X" msgstr "X चालू करने में असमर्थ" #: ../vnc.py:44 msgid "" "X was unable to start on your machine. Would you like to start VNC to " "connect to this computer from another computer and perform a graphical " "install or continue with a text mode install?" msgstr "" "X आपके मशीन पर चलने में असमर्थ था. दूसरे कंप्यूटर से इस कंप्यूटर को जोड़ने के लिए क्या आप VNC " "आरंभ करना चाहेंगे और आरेखीय अधिष्ठापन से कार्य निष्पादन करेंगे या पाठ मोड अधिष्ठापन को " "जारी रखेंगे?" #: ../vnc.py:51 ../vnc.py:54 msgid "Use text mode" msgstr "पाठ मोड का उपयोग करें" #: ../vnc.py:52 msgid "Start VNC" msgstr "VNC प्रारंभ कीजिए" #: ../vnc.py:62 msgid "VNC Configuration" msgstr "VNC विन्यास" #: ../vnc.py:66 msgid "No password" msgstr "कोई शब्दकूट नहीं" #: ../vnc.py:69 msgid "" "A password will prevent unauthorized listeners connecting and monitoring " "your installation progress. Please enter a password to be used for the " "installation" msgstr "" "शब्दकूट अनधिकृत श्रोताओं को आपके अधिष्ठापन प्रगति से जुड़ने और नियंत्रण स्थापित करने से " "रोकेगा. कृपया अधिष्ठापन के लिए प्रयुक्त शब्दकूट को दाखिल करें" #: ../vnc.py:77 ../textw/userauth_text.py:42 ../loader2/urls.c:446 msgid "Password:" msgstr "शब्दकूटः" #: ../vnc.py:78 ../textw/userauth_text.py:43 msgid "Password (confirm):" msgstr "शब्दकूट (निश्चित करें):" #: ../vnc.py:100 ../textw/userauth_text.py:64 msgid "Password Mismatch" msgstr "शब्दकूट मेल नहीं खाता" #: ../vnc.py:101 ../textw/userauth_text.py:65 msgid "The passwords you entered were different. Please try again." msgstr "आपने जो शब्दकूट दिए, वे भिन्न थे. कृपया पुनः प्रयास करें." #: ../vnc.py:106 ../textw/userauth_text.py:59 msgid "Password Length" msgstr "शब्दकूट लंबाई" #: ../vnc.py:107 msgid "The password must be at least six characters long." msgstr "शब्दकूट कम से कम छह संप्रतीक का जरूर होना चाहिए." #: ../vnc.py:137 msgid "VNC Password Error" msgstr "VNC शब्दकूट त्रुटि" #: ../vnc.py:138 msgid "" "You need to specify a vnc password of at least 6 characters long.\n" "\n" "Press to reboot your system.\n" msgstr "" "आपको कम से कम 6 संप्रतीक लंबे एक vnc शब्दकूट की जरूरत है.\n" "\n" "अपने सिस्टम को रिबूट करने के लिये दबायें.\n" #: ../vnc.py:183 msgid "Starting VNC..." msgstr "VNC प्रारंभ कर रहा है..." #: ../vnc.py:218 #, python-format msgid "%s %s installation on host %s" msgstr "%s %s का %s मेजबान पर अधिष्ठापन" #: ../vnc.py:220 #, python-format msgid "%s %s installation" msgstr "%s %s अधिष्ठापन" #: ../vnc.py:240 msgid "Unable to set vnc password - using no password!" msgstr "vnc शब्दकूट सेट करने में असमर्थ - किसी शब्दकूट का प्रयोग नहीं कर रहा है!" #: ../vnc.py:241 msgid "Make sure your password is at least 6 characters in length." msgstr "यह निश्चित करें कि आपका शब्दकूट कम से कम 6 संप्रतीकों की लंबाई में है." #: ../vnc.py:264 msgid "" "\n" "\n" "WARNING!!! VNC server running with NO PASSWORD!\n" "You can use the vncpassword= boot option\n" "if you would like to secure the server.\n" "\n" msgstr "" "\n" "\n" "चेतावनी!!! VNC सर्वर बिना शब्दकूट से चल रहा है!\n" "आप vncpassword= बूट विकल्प का प्रयोग कर सकते हैं\n" "यदि आप सर्वर की सुरक्षा चाहें.\n" #: ../vnc.py:268 msgid "The VNC server is now running." msgstr "VNC सर्वर अब चल रहा है." #: ../vnc.py:271 #, python-format msgid "Attempting to connect to vnc client on host %s..." msgstr "%s मेजबान पर vnc क्लाइंट से जुड़ने का प्रयास कर रहा है...." #: ../vnc.py:283 msgid "Connected!" msgstr "जुड़ गया!" #: ../vnc.py:288 msgid "Giving up attempting to connect after 50 tries!\n" msgstr "50 प्रयत्नों के बाद जुड़ने का प्रयास छोड़ रहा है!\n" #: ../vnc.py:290 #, python-format msgid "Please manually connect your vnc client to %s to begin the install." msgstr "अधिष्ठापन प्रारंभ करने के लिए कृपया अपना vnc क्लाइंट %s से दस्ती रूप से जोड़ें." #: ../vnc.py:292 msgid "Please manually connect your vnc client to begin the install." msgstr "अधिष्ठापन प्रारंभ करने के लिए कृपया अपना vnc क्लाइंट दस्ती रूप से जोड़ें ." #: ../vnc.py:296 msgid "Will try to connect again in 15 seconds..." msgstr "15 सेकण्डों में दोबारा जुड़ने का प्रयास करेगा..." #: ../vnc.py:304 #, python-format msgid "Please connect to %s to begin the install..." msgstr "अधिष्ठापन प्रारंभ करने के लिए कृपया %s से जुड़ें..." #: ../vnc.py:306 msgid "Please connect to begin the install..." msgstr "अधिष्ठापन प्रारंभ करने के लिए कृपया जुड़ें..." #: ../xsetup.py:56 msgid "DDC Probed Monitor" msgstr "DDC खोजे गए मॉनीटर" #: ../yuminstall.py:103 msgid "Processing" msgstr "प्रक्रिया हो रही है" #: ../yuminstall.py:104 msgid "Preparing transaction from installation source..." msgstr "अधिष्ठापन श्रोत से विनिमय के लिए तैयार कर रहा है..." #: ../yuminstall.py:148 #, python-format msgid "" "The package %s-%s-%s.%s cannot be opened. This is due to a missing file or " "perhaps a corrupt package. If you are installing from CD media this usually " "means the CD media is corrupt, or the CD drive is unable to read the media.\n" "\n" "Press 'Retry' to try again." msgstr "" "%s-%s-%s.%s संकुल खोला नहीं जा सकता. यह फाइल नहीं होने या शायद भ्रष्ट संकुल के कारण हो " "सकता है. यदि आप CD माध्यम से अधिष्ठापन कर रहे हैं इसका सामान्यतः अर्थ यह है कि CD " "माध्यम भ्रष्ट है या CD चालन माध्यम को पढ़ने में असमर्थ है.\n" "\n" "पुनःप्रयास करने के लिए 'फिर कोशिश करें' दबाएं." #: ../yuminstall.py:160 ../yuminstall.py:524 ../yuminstall.py:620 #: ../yuminstall.py:854 msgid "Re_boot" msgstr "रीबूट करें (_b)" #: ../yuminstall.py:164 msgid "" "If you reboot, your system will be left in an inconsistent state that will " "likely require reinstallation. Are you sure you wish to continue?" msgstr "" "अगर आप सिस्टम रिबूट करते हैं, आपका सिस्टम एक असंगत स्थिति में छूट जायेगा जिसके लिये " "अधिष्ठापन की जरूरत होगी. क्या आप जारी रखने की इच्छा रखते हैं?" #: ../yuminstall.py:173 msgid "_Cancel" msgstr "रद्द करें (_C)" #: ../yuminstall.py:481 ../yuminstall.py:482 msgid "file conflicts" msgstr "फाइल विरोध" #: ../yuminstall.py:483 msgid "older package(s)" msgstr "पुराना संकुल" #: ../yuminstall.py:484 msgid "insufficient disk space" msgstr "अपर्याप्त डिस्क स्थान" #: ../yuminstall.py:485 msgid "insufficient disk inodes" msgstr "अपर्याप्त डिस्क आइनोड" #: ../yuminstall.py:486 msgid "package conflicts" msgstr "संकुल विरोध" #: ../yuminstall.py:487 msgid "package already installed" msgstr "संकुल पहले से अधिष्ठापित है" #: ../yuminstall.py:488 msgid "required package" msgstr "जरूरी संकुल" #: ../yuminstall.py:489 msgid "package for incorrect arch" msgstr "गलत आर्किटेक्चर के लिये संकुल" #: ../yuminstall.py:490 msgid "package for incorrect os" msgstr "गलत os के लिये संकुल" #: ../yuminstall.py:503 msgid "You need more space on the following file systems:\n" msgstr "निम्न फाइल सिस्टम पर आपको ज्यादा स्थान की जरूरत है:\n" #: ../yuminstall.py:519 msgid "Error running transaction" msgstr "लेनदेन के दौरान त्रुटि..." #: ../yuminstall.py:615 #, python-format msgid "" "The file %s cannot be opened. This is due to a missing file or perhaps a " "corrupt package. If you are installing from CD media this usually means the " "CD media is corrupt, or the CD drive is unable to read the media.\n" "\n" msgstr "" "%s फाइल खोला नहीं जा सकता. यह फाइल नहीं होने या शायद भ्रष्ट संकुल के कारण हो " "सकता है. यदि आप CD माध्यम से अधिष्ठापन कर रहे हैं इसका सामान्यतः अर्थ यह है कि CD " "माध्यम भ्रष्ट है या CD चालन माध्यम को पढ़ने में असमर्थ है.\n" "\n" #: ../yuminstall.py:659 msgid "Retrieving installation information..." msgstr "अधिष्ठापन जानकारी पा रहा है..." #: ../yuminstall.py:675 #, python-format msgid "" "Unable to read package metadata. This may be due to a missing repodata " "directory. Please ensure that your install tree has been correctly " "generated. %s" msgstr "" "संकुल मेडाडाटा पढ़ने में असमर्थ. यह गुम रिपोडाटा निर्देशिका के कारण हो सकता है. कृपया " "निश्चित करें कि आप अधिष्ठापन तरू सही से उत्पन्न किया गया है. %s" #: ../yuminstall.py:704 msgid "Uncategorized" msgstr "अवर्गीकृत" #: ../yuminstall.py:848 #, python-format msgid "" "Your selected packages require %d MB of free space for installation, but you " "do not have enough available. You can change your selections or reboot." msgstr "आपके चयनित संकुल के अधिष्ठापन के लिये %d MB मुक्त स्थान की जरूरत है, लेकिन आपके पास पर्याप्त उपलब्ध नहीं है. आप अपना चयन बदल सकते हैं या रिबूट करें." #: ../yuminstall.py:987 #, python-format msgid "" "You appear to be upgrading from a system which is too old to upgrade to this " "version of %s. Are you sure you wish to continue the upgrade process?" msgstr "" "ऐसा लग रहा है कि जो आप सिस्टम उन्नयन जिस %s संस्करण में कर रहे हैं, वह इतना पुराना है कि " "उसपर ऐसा नहीं किया जा सकता . क्या आप निश्चित हैं कि आप उन्नयन प्रक्रिया करना चाहते हैं." #: ../yuminstall.py:1019 msgid "Install Starting" msgstr "अधिष्ठापन प्रारंभ हो रहा है " #: ../yuminstall.py:1020 msgid "Starting install process. This may take several minutes..." msgstr "अधिष्ठापन प्रक्रिया प्रारंभ हो रही है, यह कई मिनट ले सकता है....." #: ../yuminstall.py:1036 msgid "Post Upgrade" msgstr "उत्तर उन्नयन" #: ../yuminstall.py:1037 msgid "Performing post upgrade configuration..." msgstr "उत्तर अधिष्ठापन विन्यास चला रहा है..." #: ../yuminstall.py:1039 msgid "Post Install" msgstr "उत्तर अधिष्ठापन" #: ../yuminstall.py:1040 msgid "Performing post install configuration..." msgstr "उत्तर अधिष्ठापन विन्यास चला रहा है..." #: ../yuminstall.py:1185 msgid "Installation Progress" msgstr "अधिष्ठापन प्रगति" #: ../yuminstall.py:1229 msgid "Dependency Check" msgstr "अधीनता जांच" #: ../yuminstall.py:1230 msgid "Checking dependencies in packages selected for installation..." msgstr "अधिष्ठापन के लिए चयनित संकुलों में अधीनताओं को जांच रहा है..." #: ../zfcp.py:28 msgid "" "zSeries machines can access industry-standard SCSI devices via Fibre Channel " "(FCP). You need to provide 5 parameters for each device: a 16 bit device " "number, a 16bit SCSI ID, a 64 bit World Wide Port Name (WWPN), a 16bit SCSI " "LUN and a 64 bit FCP LUN." msgstr "" "zSeries मशीन फाइबर चैनल (FCP) के मार्फत उद्योग मानक SCSI युक्तियों का अभिगम कर सकता " "है. प्रत्येक युक्ति के लिए आपको 5 पैरामीटर उपलब्ध कराना है: एक 16 बिट युक्ति संख्या, एक 16 " "बिट SCSI ID, एक 64 बिट वर्ल्ड वाइड पोर्ट संख्या (WWPN), एक 16 बिट SCSI LUN और a " "64 बिट FCP LUN." #: ../zfcp.py:30 msgid "Device number" msgstr "युक्ति संख्या" #: ../zfcp.py:31 msgid "You have not specified a device number or the number is invalid" msgstr "आपने एक युक्ति संख्या निर्दिष्ट नहीं की है या संख्या अवैध है" #: ../zfcp.py:33 msgid "SCSI Id" msgstr "SCSI Id" #: ../zfcp.py:34 msgid "You have not specified a SCSI ID or the ID is invalid." msgstr "आपने एक SCSI ID निर्दिष्ट नहीं की है या ID अवैध है" #: ../zfcp.py:36 ../textw/zfcp_text.py:101 msgid "WWPN" msgstr "WWPN" #: ../zfcp.py:37 msgid "You have not specified a worldwide port name or the name is invalid." msgstr "आपने एक वर्ल्ड वाइड पोर्ट संख्या निर्दिष्ट नहीं की है या नाम अवैध है" #: ../zfcp.py:39 msgid "SCSI LUN" msgstr "SCSI LUN" #: ../zfcp.py:40 msgid "You have not specified a SCSI LUN or the number is invalid." msgstr "आपने एक SCSI LUN निर्दिष्ट नहीं की है या संख्या अवैध है" #: ../zfcp.py:42 ../textw/zfcp_text.py:101 msgid "FCP LUN" msgstr "FCP LUN" #: ../zfcp.py:43 msgid "You have not specified a FCP LUN or the number is invalid." msgstr "आपने एक FCP LUN निर्दिष्ट नहीं की है या संख्या अवैध है." #: ../iw/account_gui.py:25 msgid "Set Root Password" msgstr "रूट शब्दकूट जमाएँ" #: ../iw/account_gui.py:40 ../iw/account_gui.py:48 ../iw/account_gui.py:55 #: ../iw/account_gui.py:64 ../textw/userauth_text.py:69 msgid "Error with Password" msgstr "शब्दकूट के साथ त्रुटि " #: ../iw/account_gui.py:41 msgid "" "You must enter your root password and confirm it by typing it a second time " "to continue." msgstr "" "आपको, अपने रूट शब्दकूट अवश्य दाखिल करना है और जारी करने के लिए दूसरी बार टंकित करके " "निश्चित करें ." #: ../iw/account_gui.py:49 msgid "The passwords you entered were different. Please try again." msgstr "आपने भिन्न शब्दकूट दाखिल किया है. कृपया पुनःप्रयास करें." #: ../iw/account_gui.py:56 msgid "The root password must be at least six characters long." msgstr "रूट शब्दकूट कम से कम छः संप्रतीकों का अवश्य होना चाहिए." #: ../iw/account_gui.py:65 ../textw/userauth_text.py:70 msgid "" "Requested password contains non-ascii characters which are not allowed for " "use in password." msgstr "" "निवेदित शब्दकूट में non-ascii संप्रतीक समाहित है जोकि शब्दकूट में प्रयोग के लिए अनुमति नहीं " "है." #: ../iw/account_gui.py:92 msgid "" "The root account is used for administering the system. Enter a password for " "the root user." msgstr "" "रूट खाता का उपयोग सिस्टम के प्रशासन के लिए होता है. रूट उपयोक्ता के लिए शब्दकूट दाखिल " "करें." #: ../iw/account_gui.py:109 msgid "Root _Password: " msgstr "रूट शब्दकूट (_P):" #: ../iw/account_gui.py:112 msgid "_Confirm: " msgstr "निश्चित करें (_C): " #: ../iw/autopart_type.py:113 ../textw/partition_text.py:1526 msgid "Remove all partitions on selected drives and create default layout." msgstr "चयनित ड्राइव पर सभी विभाजनों को हटाएँ और मूलभूत लेआउट बनायें" #: ../iw/autopart_type.py:114 ../textw/partition_text.py:1527 msgid "Remove linux partitions on selected drives and create default layout." msgstr "linux विभाजन को चयनित ड्राइव पर हटायें और मूलभूत लेआउट बनायें." #: ../iw/autopart_type.py:115 ../textw/partition_text.py:1528 msgid "Use free space on selected drives and create default layout." msgstr "चयनित ड्राइव पर मुक्त स्थान का प्रयोग करें और मूलभूत लेआउट बनायें." #: ../iw/autopart_type.py:116 ../textw/partition_text.py:1529 msgid "Create custom layout." msgstr "पसंदीदा लेआउट बनायें." #: ../iw/blpasswidget.py:37 msgid "" "A boot loader password prevents users from changing options passed to the " "kernel. For greater system security, it is recommended that you set a " "password." msgstr "" "एक बूट लोडर शब्दकूट, कर्नल को भेजे जाने वाले विकल्पों को उपयोक्ताओं द्वारा बदलने से बचाता " "है. उच्च सिस्टम सुरक्षा के लिए, यह अनुशंसित है कि आप एक शब्दकूट जमाएँ." #: ../iw/blpasswidget.py:42 msgid "_Use a boot loader password" msgstr "एक बूटलोडर शब्दकूट का प्रयोग करें (_U)" #: ../iw/blpasswidget.py:73 msgid "Change _password" msgstr "शब्दकूट बदलें (_p)" #: ../iw/blpasswidget.py:96 msgid "Enter Boot Loader Password" msgstr "बूट लोडर शब्दकूट दाखिल करें" #: ../iw/blpasswidget.py:102 msgid "" "Enter a boot loader password and then confirm it. (Note that your BIOS " "keymap may be different than the actual keymap you are used to.)" msgstr "" "एक बूट लोडर शब्दकूट दाखिल करें और उसे निश्चित करें. (ध्यान रखें कि BIOS कुंजीमेप असली कुंजीमेप " "से अलग हो सकता है जो आप उपयोग करते हैं.)" #: ../iw/blpasswidget.py:109 msgid "_Password:" msgstr "शब्दकूटः" #: ../iw/blpasswidget.py:115 msgid "Con_firm:" msgstr "निश्चित करें (_f):" #: ../iw/blpasswidget.py:136 msgid "Passwords don't match" msgstr "शब्दकूट एक समान नहीं है" #: ../iw/blpasswidget.py:137 ../textw/bootloader_text.py:440 msgid "Passwords do not match" msgstr "शब्दकूट एक समान नहीं है" #: ../iw/blpasswidget.py:146 ../textw/bootloader_text.py:450 msgid "" "Your boot loader password is less than six characters. We recommend a " "longer boot loader password.\n" "\n" "Would you like to continue with this password?" msgstr "" "आपका बूट लोडर शब्दकूट छः संप्रतीक से कम है. हम एक बड़े बूट लोडर शब्दकूट की अनुशंसा करते हैं.\n" "\n" "क्या आप इस शब्दकूट को जारी रखना चाहते हैं?" #: ../iw/bootloader_advanced_gui.py:27 msgid "Advanced Boot Loader Configuration" msgstr "उन्नत बूट लोडर विन्यास" #: ../iw/bootloader_advanced_gui.py:42 ../textw/bootloader_text.py:125 msgid "" "Forcing the use of LBA32 for your bootloader when not supported by the BIOS " "can cause your machine to be unable to boot.\n" "\n" "Would you like to continue and force LBA32 mode?" msgstr "" "BIOS द्वारा असमर्थित स्थिति में आपके बूटलोडर के लिए LBA32 के उपयोग पर दबाब डालने से " "आपकी मशीन बूट होने में असमर्थ होगी.\n" "\n" "क्या आप जारी करके और LBA32 मोड पर दबाव डालना चाहते हैं?" #: ../iw/bootloader_advanced_gui.py:48 msgid "Force LBA32" msgstr "LBA32 पर दबाव डालें" #: ../iw/bootloader_advanced_gui.py:69 msgid "_Force LBA32 (not normally required)" msgstr "LBA32 को दबाव डालें (सामान्यतः आवश्यक नहीं है)" #: ../iw/bootloader_advanced_gui.py:73 msgid "" "If you wish to add default options to the boot command, enter them into the " "'General kernel parameters' field." msgstr "" "यदि आप बूट कमांड को मूलभूत विकल्पों को जोड़ना चाहते हैं, उन्हें \"साधारण कर्नल पैरामीटर \" " "क्षेत्र में दाखिल करें." #: ../iw/bootloader_advanced_gui.py:79 msgid "_General kernel parameters" msgstr "सामान्य कर्नल पैरामीटर (_G)" #: ../iw/bootloader_main_gui.py:30 ../textw/bootloader_text.py:42 #: ../textw/bootloader_text.py:108 ../textw/bootloader_text.py:165 #: ../textw/bootloader_text.py:283 ../textw/bootloader_text.py:392 msgid "Boot Loader Configuration" msgstr "बूट लोडर विन्यास" #: ../iw/bootloader_main_gui.py:117 #, python-format msgid "The %s boot loader will be installed on /dev/%s." msgstr "/dev/%s पर %s बूट लोडर अधिष्ठापित किया जाएगा." #: ../iw/bootloader_main_gui.py:123 msgid "No boot loader will be installed." msgstr "कोई भी बूट लोडर अधिष्ठापित नहीं किया जाएगा." #: ../iw/bootloader_main_gui.py:152 msgid "Configure advanced boot loader _options" msgstr "अग्रिम बूट लोडर विकल्प विन्यस्त करें" #: ../iw/bootlocwidget.py:39 msgid "Install Boot Loader record on:" msgstr "इस पर बूट लोडर अभिलेख अधिष्ठापन करें:" #: ../iw/bootlocwidget.py:72 msgid "_Change Drive Order" msgstr "चालन क्रम बदलें (_C)" #: ../iw/bootlocwidget.py:84 msgid "Edit Drive Order" msgstr "चालन क्रम संपादित करें" #: ../iw/bootlocwidget.py:89 msgid "" "Arrange the drives to be in the same order as used by the BIOS. Changing the " "drive order may be useful if you have multiple SCSI adapters or both SCSI " "and IDE adapters and want to boot from the SCSI device.\n" "\n" "Changing the drive order will change where the installation program locates " "the Master Boot Record (MBR)." msgstr "" "BIOS के द्वारा उपयोग किये गये रूप में चालन को समान क्रम में जमाएँ. चालन क्रम को बदलना " "उपयोगी हो सकता है यदि आपके पास बहु SCSI एडाप्टर या SCSI और IDE दोनों एडाप्टर हैं और " "SCSI युक्ति से आप बूट करना चाहते हैं.\n" "\n" "चालन क्रम बदलने से अधिष्ठापन कार्यक्रम जहाँ मास्टर बूट रिकार्ड (MBR) को पाता है वहां " "बदला जाएगा." #: ../iw/confirm_gui.py:29 ../textw/confirm_text.py:35 #: ../textw/confirm_text.py:63 msgid "Reboot?" msgstr "रीबूट करें?" #: ../iw/confirm_gui.py:30 ../textw/confirm_text.py:36 #: ../textw/confirm_text.py:64 msgid "The system will be rebooted now." msgstr "सिस्टम को अब रीबूट किया जाएगा." #: ../iw/confirm_gui.py:74 msgid "About to Install" msgstr "अधिष्ठापन करने के करीब है" #: ../iw/confirm_gui.py:80 #, python-format msgid "Click next to begin installation of %s." msgstr "%s का अधिष्ठापन प्रारंभ करने के लिए 'आगे' दबाएं" #: ../iw/confirm_gui.py:81 #, python-format msgid "" "A complete log of the installation can be found in the file '%s' after " "rebooting your system.\n" "\n" "A kickstart file containing the installation options selected can be found " "in the file '%s' after rebooting the system." msgstr "" "आपके सिस्टम को रिबूट करने के बाद अधिष्ठापन की पूरी लॉग '%s' फाइल में मिल सकती है.\n" "\n" "चयनित अधिष्ठापन विकल्पों से समाहित एक किकस्टार्ट फाइल, आपके सिस्टम को रिबूट करने के बाद " "'%s' फाइल में मिल सकता है." #: ../iw/confirm_gui.py:88 msgid "About to Upgrade" msgstr "उन्नयन करने के करीब" #: ../iw/confirm_gui.py:94 #, python-format msgid "Click next to begin upgrade of %s." msgstr "%s का उन्नयन प्रारंभ करने के लिए 'आगे' दबाएं." #: ../iw/confirm_gui.py:95 #, python-format msgid "" "A complete log of the upgrade can be found in the file '%s' after rebooting " "your system." msgstr "अपने सिस्टम को रीबूट करने के बाद '%s' फाइल में उन्नयन की संपूर्ण लॉग मिल सकती है." #: ../iw/congrats_gui.py:24 msgid "Congratulations" msgstr "बधाई" #: ../iw/congrats_gui.py:60 msgid "" "Remove any media used during the installation process and press the \"Reboot" "\" button to reboot your system.\n" "\n" msgstr "" "अधिष्ठापन प्रक्रिया के समय उपयोग में आए किसी माध्यम को हटाएँ और अपने सिस्टम को रिबूट " "करने के लिये \"रिबूट\" बटन दबायें.\n" "\n" #: ../iw/congrats_gui.py:65 #, python-format msgid "" "Congratulations, the installation is complete.\n" "\n" "%s%s" msgstr "" "बधाई, अधिष्ठापन पूर्ण हुआ.\n" "\n" "%s%s" #: ../iw/driveorderwidget.py:44 msgid "Drive" msgstr "चालन" #: ../iw/driveorderwidget.py:44 ../textw/partition_text.py:1437 msgid "Size" msgstr "आकार" #: ../iw/driveorderwidget.py:44 msgid "Model" msgstr "मॉडल" #: ../iw/examine_gui.py:31 msgid "Upgrade Examine" msgstr "परीक्षण का उन्नयन करें" #: ../iw/examine_gui.py:55 #, python-format msgid "_Install %s" msgstr "%s अधिष्ठापित करें (_I)" #: ../iw/examine_gui.py:57 msgid "" "Choose this option to freshly install your system. Existing software and " "data may be overwritten depending on your configuration choices." msgstr "" "आपके सिस्टम के नया अधिष्ठापन के लिए यह विकल्प चुनें. उपस्थित सॉफ्टवेयर और आंकड़े का अपलेखन " "आपकी विन्यास पसंद पर आधारित हो सकता है." #: ../iw/examine_gui.py:61 msgid "_Upgrade an existing installation" msgstr "एक उपस्थित अधिष्ठापन का उन्नयन करें (_U)" #: ../iw/examine_gui.py:63 #, python-format msgid "" "Choose this option if you would like to upgrade your existing %s system. " "This option will preserve the existing data on your drives." msgstr "" "यदि आप, आपके उपस्थित %s सिस्टम का उन्नयन करना चाहते हैं तो यह विकल्प चुनें. यह विकल्प " "आपके चालन पर उपस्थित आंकड़ें सुरक्षित करेगा." #: ../iw/examine_gui.py:110 ../iw/pixmapRadioButtonGroup_gui.py:197 msgid "The following installed system will be upgraded:" msgstr "निम्नांकित अधिष्ठापित सिस्टम का उन्नयन होगाः" #: ../iw/examine_gui.py:123 msgid "Unknown Linux system" msgstr "अज्ञात Linux सिस्टम" #: ../iw/ipwidget.py:92 msgid "IP Address is missing" msgstr "IP पता गुम हो गया है" #: ../iw/ipwidget.py:97 msgid "IP Addresses must contain numbers between 1 and 255" msgstr "IP पता में 1 और 255 के बीच के अंक ही होना चाहिए." #: ../iw/ipwidget.py:102 ../iw/ipwidget.py:104 msgid "IP Addresses must contain numbers between 0 and 255" msgstr "IP पता में 0 और 255 के बीच के अंक ही होना चाहिए." #: ../iw/iscsi_gui.py:26 ../textw/iscsi_text.py:55 msgid "iSCSI Configuration" msgstr "iSCSI विन्यास" #: ../iw/iscsi_gui.py:33 ../iw/iscsi_gui.py:36 msgid "Error with Data" msgstr "आंकड़ों के साथ त्रुटि" #: ../iw/iscsi_gui.py:34 msgid "No IP address entered, skipping iSCSI setup" msgstr "कोई IP पता नहीं, iSCSI सेटअप छोड़ रहा है" #: ../iw/iscsi_gui.py:36 ../textw/welcome_text.py:22 #, python-format msgid "%s" msgstr "%s" #: ../iw/language_gui.py:24 ../textw/language_text.py:41 msgid "Language Selection" msgstr "भाषा चुनाव" #: ../iw/language_gui.py:64 ../textw/language_text.py:42 ../loader2/lang.c:362 msgid "What language would you like to use during the installation process?" msgstr "अधिष्ठापन प्रक्रिया के समय आप कौन सी भाषा का प्रयोग करना चाहते हैं?" #: ../iw/lvm_dialog_gui.py:115 ../iw/lvm_dialog_gui.py:162 #: ../iw/lvm_dialog_gui.py:173 ../iw/lvm_dialog_gui.py:213 #: ../iw/lvm_dialog_gui.py:289 ../iw/lvm_dialog_gui.py:592 #: ../iw/lvm_dialog_gui.py:660 ../iw/lvm_dialog_gui.py:871 #: ../textw/partition_text.py:1291 ../textw/partition_text.py:1310 msgid "Not enough space" msgstr "पर्याप्त स्थान नहीं है" #: ../iw/lvm_dialog_gui.py:116 msgid "" "The physical extent size cannot be changed because otherwise the space " "required by the currently defined logical volumes will be increased to more " "than the available space." msgstr "" "भौतिक विस्तार आकार बदल नहीं सकता अन्यथा वर्तमान में समझाए गये लॉजिकल वॉल्यूमों के द्वारा " "आवश्यक स्थान उपलब्ध स्थान की अपेक्षा बहुत अधिक बढ़ जाएगा." #: ../iw/lvm_dialog_gui.py:125 msgid "Confirm Physical Extent Change" msgstr "भौतिक विस्तार बदलाव निश्चित करें" #: ../iw/lvm_dialog_gui.py:126 msgid "" "This change in the value of the physical extent will require the sizes of " "the current logical volume requests to be rounded up in size to an integer " "multiple of the physical extent.\n" "\n" "This change will take affect immediately." msgstr "" "भौतिक विस्तार के मान में इस परिवर्तन के लिए यह आवश्यक होगा कि वर्तमान लॉजिकल वॉल्यूम " "निवेदनों के आकारों को भौतिक विस्तार के एक पूर्णांक गुणक के आकार जैसा बनाएँ.\n" "\n" "यह बदलाव तुरंत प्रभावी होगा." #: ../iw/lvm_dialog_gui.py:135 ../iw/lvm_dialog_gui.py:195 #: ../iw/network_gui.py:164 ../iw/network_gui.py:168 ../iw/network_gui.py:191 msgid "C_ontinue" msgstr "जारी (_o)" #: ../iw/lvm_dialog_gui.py:163 #, python-format msgid "" "The physical extent size cannot be changed because the value selected (%" "10.2f MB) is larger than the smallest physical volume (%10.2f MB) in the " "volume group." msgstr "" "भौतिक विस्तार आकार बदल नहीं सकता क्योंकि वॉल्यूम ग्रूप में चयनित (%10.2f MB) मान, छोटे " "भौतिक आयतन (%10.2f MB) से बड़ा हैं." #: ../iw/lvm_dialog_gui.py:174 #, python-format msgid "" "The physical extent size cannot be changed because the value selected (%" "10.2f MB) is too large compared to the size of the smallest physical volume " "(%10.2f MB) in the volume group." msgstr "" "भौतिक विस्तार आकार बदल नहीं सकता क्योंकि वॉल्यूम ग्रूप में चयनित (%10.2f MB) मान छोटे " "भौतिक आयतन (%10.2f MB) के आकार से बड़ा हैं." #: ../iw/lvm_dialog_gui.py:188 msgid "Too small" msgstr "बहुत छोटा" #: ../iw/lvm_dialog_gui.py:189 msgid "" "This change in the value of the physical extent will waste substantial space " "on one or more of the physical volumes in the volume group." msgstr "" "भौतिक विस्तार मान में यह बदलाव, वॉल्यूम ग्रूप में भौतिक आयतनों का एक या एक से अधिक " "महत्वपूर्ण स्थान को बरबाद कर देगा." #: ../iw/lvm_dialog_gui.py:214 #, python-format msgid "" "The physical extent size cannot be changed because the resulting maximum " "logical volume size (%10.2f MB) is smaller than one or more of the currently " "defined logical volumes." msgstr "" "भौतिक विस्तार आकार बदला नहीं जा सकता क्योंकि परिणामी अधिकतम लॉजिकल वॉल्यूम आकार (%" "10.2f MB), वर्तमान में उल्लिखित एक या एक से अधिक लॉजिकल वॉल्यूमों से छोटा हैं." #: ../iw/lvm_dialog_gui.py:290 msgid "" "You cannot remove this physical volume because otherwise the volume group " "will be too small to hold the currently defined logical volumes." msgstr "" "आप इस भौतिक आयतन को हटा नहीं सकते क्योंकि अन्यथा वॉल्यूम ग्रूप वर्तमान में उल्लिखित " "तार्किक आयतनों को रखने के लिए बहुत छोटा हो जाएगा." #: ../iw/lvm_dialog_gui.py:370 ../textw/partition_text.py:1137 msgid "Make Logical Volume" msgstr "लॉजिकल वॉल्यूम बनाएँ" #: ../iw/lvm_dialog_gui.py:373 #, python-format msgid "Edit Logical Volume: %s" msgstr "%s लॉजिकल वॉल्यूम का संपादन करें" #: ../iw/lvm_dialog_gui.py:375 ../textw/partition_text.py:1135 msgid "Edit Logical Volume" msgstr "लॉजिकल वॉल्यूम का संपादन" #: ../iw/lvm_dialog_gui.py:388 ../iw/partition_dialog_gui.py:292 #: ../iw/raid_dialog_gui.py:284 msgid "_Mount Point:" msgstr "आरोह बिंदु (_M)" #: ../iw/lvm_dialog_gui.py:396 msgid "_File System Type:" msgstr "फाइल सिस्टम प्रकार (_F):" #: ../iw/lvm_dialog_gui.py:404 ../iw/partition_dialog_gui.py:311 msgid "Original File System Type:" msgstr "मूल फाइल सिस्टम प्रकारः" #: ../iw/lvm_dialog_gui.py:409 ../iw/partition_dialog_gui.py:322 #: ../iw/raid_dialog_gui.py:305 msgid "Unknown" msgstr "अज्ञात" #: ../iw/lvm_dialog_gui.py:415 msgid "_Logical Volume Name:" msgstr "लॉजिकल वॉल्यूम नाम (_L):" #: ../iw/lvm_dialog_gui.py:423 ../textw/partition_text.py:286 msgid "Logical Volume Name:" msgstr "लॉजिकल वॉल्यूम नामः" #: ../iw/lvm_dialog_gui.py:431 ../iw/partition_dialog_gui.py:367 msgid "_Size (MB):" msgstr "आकार (MB) (_S):" #: ../iw/lvm_dialog_gui.py:437 ../iw/partition_dialog_gui.py:384 #: ../iw/partition_dialog_gui.py:427 ../textw/partition_text.py:301 #: ../textw/partition_text.py:378 ../textw/partition_text.py:461 #: ../textw/partition_text.py:569 msgid "Size (MB):" msgstr "आकार (MB):" #: ../iw/lvm_dialog_gui.py:452 #, python-format msgid "(Max size is %s MB)" msgstr "(अधिकतम आकार %s MB है)" #: ../iw/lvm_dialog_gui.py:513 msgid "Illegal size" msgstr "अवैध आकार" #: ../iw/lvm_dialog_gui.py:514 msgid "The requested size as entered is not a valid number greater than 0." msgstr "निवेदित आकार जिस रूप में दाखिल है 0 से बड़ी एक मान्य संख्या नहीं है." #: ../iw/lvm_dialog_gui.py:547 msgid "Mount point in use" msgstr "आरोह बिंदु प्रयोग में है" #: ../iw/lvm_dialog_gui.py:548 #, python-format msgid "The mount point \"%s\" is in use, please pick another." msgstr "\"%s\" आरोह बिंदु प्रयोग में है, कृपया दूसरा लें." #: ../iw/lvm_dialog_gui.py:559 ../textw/partition_text.py:1259 msgid "Illegal Logical Volume Name" msgstr "अवैध लॉजिकल वॉल्यूम नाम " #: ../iw/lvm_dialog_gui.py:578 ../textw/partition_text.py:1276 msgid "Illegal logical volume name" msgstr "अवैध लॉजिकल वॉल्यूम नाम " #: ../iw/lvm_dialog_gui.py:579 ../textw/partition_text.py:1277 #, python-format msgid "The logical volume name \"%s\" is already in use. Please pick another." msgstr "\"%s\" लॉजिकल वॉल्यूम नाम पहले से प्रयोग में है. कृपया दूसरा लें." #: ../iw/lvm_dialog_gui.py:593 #, python-format msgid "" "The current requested size (%10.2f MB) is larger than maximum logical volume " "size (%10.2f MB). To increase this limit you can create more Physical " "Volumes from unpartitioned disk space and add them to this Volume Group." msgstr "" "वर्तमान में निवेदित आकार (%10.2f MB) अधिकतम लॉजिकल वॉल्यूम (%10.2f MB) से बड़ा हैं. इस " "सीमा को बढ़ाने के लिए आप इस वॉल्यूम ग्रूप के लिए भौतिक विस्तार आकार बढ़ा सकते हैं और उन्बें " "वॉल्यूम ग्रूप से जोड़ सकते हैं." #: ../iw/lvm_dialog_gui.py:637 ../iw/partition_dialog_gui.py:179 #: ../iw/partition_dialog_gui.py:191 ../iw/partition_dialog_gui.py:239 #: ../iw/raid_dialog_gui.py:211 ../textw/partition_text.py:910 #: ../textw/partition_text.py:932 ../textw/partition_text.py:1105 #: ../textw/partition_text.py:1330 msgid "Error With Request" msgstr "निवेदन के साथ त्रुटि " #: ../iw/lvm_dialog_gui.py:661 ../iw/lvm_dialog_gui.py:872 #, python-format msgid "" "The logical volumes you have configured require %g MB, but the volume group " "only has %g MB. Please either make the volume group larger or make the " "logical volume(s) smaller." msgstr "" "जिन लॉजिकल वॉल्यूमों को आपने विन्यस्त किया था उन्हें %g MB की आवश्यकता है, परंतु वॉल्यूम " "ग्रूप को केवल %g MB है. कृपया या तो वॉल्यूम ग्रूप को बड़ा बनाएँ या लॉजिकल वॉल्यूम को छोटा " "बनाएँ." #: ../iw/lvm_dialog_gui.py:711 msgid "No free slots" msgstr "कोई मुक्त खंड नहीं " #: ../iw/lvm_dialog_gui.py:712 #, python-format msgid "You cannot create more than %s logical volumes per volume group." msgstr "आप प्रत्येक वॉल्यूम ग्रूप के लिए %s लॉजिकल वॉल्यूम से अधिक नहीं बना सकते." #: ../iw/lvm_dialog_gui.py:718 msgid "No free space" msgstr "कोई मुक्त स्थान नहीं " #: ../iw/lvm_dialog_gui.py:719 msgid "" "There is no room left in the volume group to create new logical volumes. To " "add a logical volume you will need to reduce the size of one or more of the " "currently existing logical volumes" msgstr "" "वॉल्यूम ग्रूप में, नए लॉजिकल वॉल्यूमों को बनाने के लिए जगह नहीं छोड़ी गई है. एक लॉजिकल " "वॉल्यूम जोड़ने के लिए आपको वर्तमान में उपस्थित एक या एक से अधिक लॉजिकल वॉल्यूमों का आकार " "अवश्य घटा देना चाहिए." #: ../iw/lvm_dialog_gui.py:747 #, python-format msgid "Are you sure you want to Delete the logical volume \"%s\"?" msgstr "क्या आप निश्चित हैं कि \"%s\" लॉजिकल वॉल्यूम को विलोपित करना चाहते हैं?" #: ../iw/lvm_dialog_gui.py:883 msgid "Invalid Volume Group Name" msgstr "अमान्य वॉल्यूम ग्रूप नाम " #: ../iw/lvm_dialog_gui.py:896 msgid "Name in use" msgstr "नाम जो कि प्रयोग में है" #: ../iw/lvm_dialog_gui.py:897 #, python-format msgid "The volume group name \"%s\" is already in use. Please pick another." msgstr "\"%s\" वॉल्यूम ग्रूप नाम पहले से प्रयोग में है. कृपया दूसरा लें." #: ../iw/lvm_dialog_gui.py:941 msgid "Not enough physical volumes" msgstr "भौतिक समूह पर्याप्त नहीं" #: ../iw/lvm_dialog_gui.py:942 msgid "" "At least one unused physical volume partition is needed to create an LVM " "Volume Group.\n" "\n" "Create a partition or RAID array of type \"physical volume (LVM)\" and then " "select the \"LVM\" option again." msgstr "" "एक LVM वॉल्यूम ग्रूप बनाने के लिए कम से कम एक अनुपयोगी भौतिक आयतन विभाजन की आवश्यकता " "हैं.\n" "\n" "एक विभाजन या \"भौतिक आयतन (LVM)\" प्रकार की RAID सरणी बनाएँ और तब \"LVM\" " "विकल्प पुनःचुनें." #: ../iw/lvm_dialog_gui.py:953 msgid "Make LVM Volume Group" msgstr "LVM वॉल्यूम ग्रूप बनाएँ" #: ../iw/lvm_dialog_gui.py:956 #, python-format msgid "Edit LVM Volume Group: %s" msgstr "LVM वॉल्यूम ग्रूप संपादित करें: %s" #: ../iw/lvm_dialog_gui.py:958 msgid "Edit LVM Volume Group" msgstr "LVM वॉल्यूम ग्रूप संपादित करें" #: ../iw/lvm_dialog_gui.py:974 msgid "_Volume Group Name:" msgstr "वॉल्यूम ग्रूप नाम (_V):" #: ../iw/lvm_dialog_gui.py:982 msgid "Volume Group Name:" msgstr "वॉल्यूम ग्रूप नामः" #: ../iw/lvm_dialog_gui.py:990 msgid "_Physical Extent:" msgstr "भौतिक विस्तार (_P):" #: ../iw/lvm_dialog_gui.py:1005 msgid "Physical Volumes to _Use:" msgstr "प्रयोग करने के लिए भौतिक आयतन (_U):" #: ../iw/lvm_dialog_gui.py:1011 msgid "Used Space:" msgstr "उपयोग किया गया स्थानः" #: ../iw/lvm_dialog_gui.py:1028 msgid "Free Space:" msgstr "मुक्त स्थानः" #: ../iw/lvm_dialog_gui.py:1046 msgid "Total Space:" msgstr "कुल स्थानः" #: ../iw/lvm_dialog_gui.py:1075 msgid "Logical Volume Name" msgstr "लॉजिकल वॉल्यूम नाम" #: ../iw/lvm_dialog_gui.py:1078 ../iw/partition_gui.py:364 #: ../iw/upgrade_swap_gui.py:136 ../textw/partition_text.py:1437 #: ../textw/upgrade_text.py:108 msgid "Mount Point" msgstr "आरोह बिंदु" #: ../iw/lvm_dialog_gui.py:1081 ../iw/partition_gui.py:369 msgid "Size (MB)" msgstr "आकार (MB)" #: ../iw/lvm_dialog_gui.py:1095 ../iw/osbootwidget.py:96 ../iw/zfcp_gui.py:97 msgid "_Add" msgstr "जोड़ें (_A)" #: ../iw/lvm_dialog_gui.py:1098 ../iw/network_gui.py:530 #: ../iw/osbootwidget.py:100 ../iw/partition_gui.py:1357 ../iw/zfcp_gui.py:100 msgid "_Edit" msgstr "संपादन करें (_E)" #: ../iw/lvm_dialog_gui.py:1113 msgid "Logical Volumes" msgstr "लॉजिकल वॉल्यूम" #: ../iw/mouse_gui.py:24 msgid "Mouse Configuration" msgstr "माउस विन्यास " #: ../iw/mouse_gui.py:77 ../textw/mouse_text.py:20 msgid "/dev/ttyS0 (COM1 under DOS)" msgstr "/dev/ttyS0 (DOS के अंतर्गत COM1)" #: ../iw/mouse_gui.py:78 ../textw/mouse_text.py:21 msgid "/dev/ttyS1 (COM2 under DOS)" msgstr "/dev/ttyS1 (DOS के अंतर्गत COM2)" #: ../iw/mouse_gui.py:79 ../textw/mouse_text.py:22 msgid "/dev/ttyS2 (COM3 under DOS)" msgstr "/dev/ttyS2 (DOS के अंतर्गत COM3)" #: ../iw/mouse_gui.py:80 ../textw/mouse_text.py:23 msgid "/dev/ttyS3 (COM4 under DOS)" msgstr "/dev/ttyS3 (DOS के अंतर्गत COM4)" #: ../iw/mouse_gui.py:90 ../iw/osbootwidget.py:157 msgid "_Device" msgstr "युक्ति (_D)" #: ../iw/mouse_gui.py:136 msgid "_Model" msgstr "मॉडल (_M)" #: ../iw/mouse_gui.py:234 msgid "_Emulate 3 buttons" msgstr "3 बटनों अनुकरण करें (_E)" #: ../iw/mouse_gui.py:249 msgid "Select the appropriate mouse for the system." msgstr "सिस्टम के लिए उचित मॉउस चुनें." #: ../iw/network_gui.py:27 ../iw/network_gui.py:607 msgid "Gateway" msgstr "गेटवे" #: ../iw/network_gui.py:27 ../iw/network_gui.py:609 msgid "Primary DNS" msgstr "प्राथमिक DNS" #: ../iw/network_gui.py:28 ../iw/network_gui.py:611 msgid "Secondary DNS" msgstr "द्वितीयक DNS" #: ../iw/network_gui.py:28 ../iw/network_gui.py:613 msgid "Tertiary DNS" msgstr "तृतीयक DNS" #: ../iw/network_gui.py:30 msgid "_Gateway" msgstr "गेटवे (_G)" #: ../iw/network_gui.py:30 msgid "_Primary DNS" msgstr "प्राथमिक DNS (_P)" #: ../iw/network_gui.py:31 msgid "_Secondary DNS" msgstr "द्वितीयक DNS (_S)" #: ../iw/network_gui.py:31 msgid "_Tertiary DNS" msgstr "तृतीयक DNS (_T)" #: ../iw/network_gui.py:35 msgid "Network Configuration" msgstr "संजाल विन्यास" #: ../iw/network_gui.py:163 ../iw/network_gui.py:167 ../iw/network_gui.py:171 #: ../iw/network_gui.py:176 ../iw/network_gui.py:182 ../iw/network_gui.py:186 #: ../iw/network_gui.py:191 ../iw/zfcp_gui.py:159 ../iw/zfcp_gui.py:223 #: ../textw/zfcp_text.py:62 msgid "Error With Data" msgstr "आकड़े के साथ त्रुटि" #: ../iw/network_gui.py:164 msgid "" "You have not specified a hostname. Depending on your network environment " "this may cause problems later." msgstr "" "आपने एक मेजबाननाम निर्दिष्ट नहीं किया हैं. आपके संजाल वातावरण पर आश्रित यह आगे समस्या " "बना सकती है." #: ../iw/network_gui.py:168 #, python-format msgid "" "You have not specified the field \"%s\". Depending on your network " "environment this may cause problems later." msgstr "" "आपने \"%s\" क्षेत्र को निर्दिष्ट नहीं किया हैं. आपके संजाल वातावरण पर आश्रित यह आगे समस्या " "बना सकती है." #: ../iw/network_gui.py:172 ../textw/network_text.py:413 #, python-format msgid "" "The hostname \"%s\" is not valid for the following reason:\n" "\n" "%s" msgstr "" "निम्नांकित कारणों से %s मेजबाननाम उचित नहीं है:\n" "\n" "%s" #: ../iw/network_gui.py:177 #, python-format msgid "" "An error occurred converting the value entered for \"%s\":\n" "%s" msgstr "" "\"%s\" के लिए दाखिल मान को बदलने में एक त्रुटि घटित हुआ है:\n" "%s" #: ../iw/network_gui.py:183 #, python-format msgid "A value is required for the field \"%s\"." msgstr "\"%s\" क्षेत्र के लिए एक मान आवश्यक है." #: ../iw/network_gui.py:187 msgid "The IP information you have entered is invalid." msgstr "आपने जो IP जानकारी दाखिल की है वह अमान्य है." #: ../iw/network_gui.py:191 msgid "" "You have no active network devices. Your system will not be able to " "communicate over a network by default without at least one device active.\n" "\n" "NOTE: If you have a PCMCIA-based network adapter you should leave it " "inactive at this point. When you reboot your system the adapter will be " "activated automatically." msgstr "" "आपके पास सक्रिय संजाल युक्तियाँ नहीं हैं. आपका सिस्टम कम से कम एक सक्रिय युक्ति के बिना, " "मूलभूत रूप से एक संजाल पर संचार करने में असमर्थ है.\n" "\n" "नोट: यदि आपके पास एक PCMCIA-आधारित संजाल एडाप्टर है, यहाँ पर आपको इसे निष्क्रिय " "छोड़ना हैं. जब आप अपने सिस्टम को रीबूट करें एडाप्टर स्वतः ही सक्रिय हो जाएगा." #: ../iw/network_gui.py:210 #, python-format msgid "Edit Interface %s" msgstr "%s अंतरफलक का संपादन करें" #: ../iw/network_gui.py:221 msgid "Configure using _DHCP" msgstr "DHCP के प्रयोग से विन्यस्त करें" #: ../iw/network_gui.py:227 msgid "_Activate on boot" msgstr "बूट पर सक्रिय करें (_A)" #: ../iw/network_gui.py:236 msgid "_IP Address" msgstr "_IP पता" #: ../iw/network_gui.py:237 msgid "Net_mask" msgstr "नेटमास्क (_m)" #: ../iw/network_gui.py:242 msgid "_Point to Point (IP)" msgstr "बिंदु से बिंदु (IP)" #: ../iw/network_gui.py:246 msgid "_ESSID" msgstr "_ESSID" #: ../iw/network_gui.py:247 msgid "Encryption _Key" msgstr "गोपन कुंजी (_K)" #: ../iw/network_gui.py:258 msgid "Hardware address:" msgstr "हार्डवेयर पताः" #: ../iw/network_gui.py:297 #, python-format msgid "Configure %s" msgstr "%s विन्यस्त करें" #: ../iw/network_gui.py:471 msgid "Active on Boot" msgstr "बूट पर सक्रिय" #: ../iw/network_gui.py:473 ../iw/osbootwidget.py:67 #: ../iw/partition_gui.py:363 ../textw/bootloader_text.py:193 #: ../textw/bootloader_text.py:259 ../textw/mouse_text.py:38 #: ../textw/partition_text.py:1437 msgid "Device" msgstr "युक्ति" #: ../iw/network_gui.py:475 msgid "IP/Netmask" msgstr "IP/नेटमास्क" #: ../iw/network_gui.py:537 msgid "Network Devices" msgstr "संजाल युक्तियां" #: ../iw/network_gui.py:548 msgid "Set the hostname:" msgstr "मेजबाननाम जमाएँ:" #: ../iw/network_gui.py:553 msgid "_automatically via DHCP" msgstr "DHCP द्वारा स्वचालित (_a)" #: ../iw/network_gui.py:560 msgid "_manually" msgstr "दस्ती रूप से (_m)" #: ../iw/network_gui.py:564 msgid "(ex. \"host.domain.com\")" msgstr "(उदाहरण. \"host.domain.com\")" #: ../iw/network_gui.py:570 ../loader2/net.c:837 msgid "Hostname" msgstr "मेजबाननाम" #: ../iw/network_gui.py:618 msgid "Miscellaneous Settings" msgstr "विविध जमावट" #: ../iw/osbootwidget.py:43 msgid "" "You can configure the boot loader to boot other operating systems. It will " "allow you to select an operating system to boot from the list. To add " "additional operating systems, which are not automatically detected, click " "'Add.' To change the operating system booted by default, select 'Default' by " "the desired operating system." msgstr "" "अन्य ऑपरेटिंग सिस्टमों को बूट करने के लिए आप बूटलोडर विन्यस्त कर सकते हैं. यह आपको सूची से " "बूट के लिए एक ऑपरेटिंग सिस्टम चुनने की अनुमति देता हैं. अतिरिक्त ऑपरेटिंग सिस्टमों को जोड़ने के " "लिए, जो स्वतः खोजे नहीं जा सकते, 'जोड़ें' दबाएँ. मूलभूत द्वारा बूट किया गया ऑपरेटिंग सिस्टम " "को बदलने के लिए, उल्लिखित ऑपरेटिंग सिस्टम द्वारा 'मूलभूत' चुनें." #: ../iw/osbootwidget.py:67 ../textw/bootloader_text.py:259 msgid "Default" msgstr "मूलभूत " #: ../iw/osbootwidget.py:67 msgid "Label" msgstr "लेबल" #: ../iw/osbootwidget.py:130 msgid "Image" msgstr "विंब" #: ../iw/osbootwidget.py:137 msgid "" "Enter a label to be displayed in the boot loader menu. The device (or hard " "drive and partition number) is the device from which it boots." msgstr "" "बूट लोडर प्रसूची में प्रदर्शन के लिए एक लेबल दाखिल करें. युक्ति (या हार्ड ड्राइव और विभाजन " "संख्या) वह युक्ति है जिससे यह बूट होता है." #: ../iw/osbootwidget.py:149 msgid "_Label" msgstr "लेबल (_L)" #: ../iw/osbootwidget.py:188 msgid "Default Boot _Target" msgstr "मूलभूत बूट लक्ष्य (_T)" #: ../iw/osbootwidget.py:217 msgid "You must specify a label for the entry" msgstr "आपको प्रविष्टि के लिए एक लेबल अवश्य निर्दिष्ट करना है" #: ../iw/osbootwidget.py:226 msgid "Boot label contains illegal characters" msgstr "बूट लेबल में अवैध संप्रतीक समाहित हैं" #: ../iw/osbootwidget.py:250 msgid "Duplicate Label" msgstr "बनावटी लेबल" #: ../iw/osbootwidget.py:251 msgid "This label is already in use for another boot entry." msgstr "दूसरी बूट प्रविष्टि के लिए यह लेबल पहले से प्रयोग में है." #: ../iw/osbootwidget.py:264 msgid "Duplicate Device" msgstr "बनावटी युक्ति" #: ../iw/osbootwidget.py:265 msgid "This device is already being used for another boot entry." msgstr "दूसरी बूट प्रविष्टि के लिए यह युक्ति पहले से प्रयोग में है." #: ../iw/osbootwidget.py:329 ../textw/bootloader_text.py:342 msgid "Cannot Delete" msgstr "मिटा नहीं सकते हैं" #: ../iw/osbootwidget.py:330 ../textw/bootloader_text.py:343 #, python-format msgid "" "This boot target cannot be deleted because it is for the %s system you are " "about to install." msgstr "" "इस बूट लक्ष्य को मिटाया नहीं जा सकता क्योंकि यह %s सिस्टम के लिए है जिसका आप अधिष्ठापन " "करने जा रहे हैं." #: ../iw/partition_dialog_gui.py:58 msgid "Additional Size Options" msgstr "अतिरिक्त आकार विकल्प" #: ../iw/partition_dialog_gui.py:63 msgid "_Fixed size" msgstr "निश्चित आकार (_F)" #: ../iw/partition_dialog_gui.py:65 msgid "Fill all space _up to (MB):" msgstr "(MB) तक सभी स्थान भरें (_u):" #: ../iw/partition_dialog_gui.py:75 msgid "Fill to maximum _allowable size" msgstr "अधिकतम अनुमति देने योग्य आकार तक भरें (_a)" #: ../iw/partition_dialog_gui.py:180 msgid "The end cylinder must be greater than the start cylinder." msgstr "अंतिम सिलेण्डर को आरंभिक सिलेण्डर से अधिक बड़ा होना चाहिए." #: ../iw/partition_dialog_gui.py:269 ../textw/partition_text.py:711 msgid "Add Partition" msgstr "विभाजन जोड़ें" #: ../iw/partition_dialog_gui.py:272 #, python-format msgid "Edit Partition: /dev/%s" msgstr "विभाजन का संपादन करें: /dev/%s" #: ../iw/partition_dialog_gui.py:274 msgid "Edit Partition" msgstr "विभाजन का संपादन करें" #: ../iw/partition_dialog_gui.py:301 ../iw/raid_dialog_gui.py:292 msgid "File System _Type:" msgstr "फाइल सिस्टम प्रकार (_T)" #: ../iw/partition_dialog_gui.py:333 msgid "Allowable _Drives:" msgstr "अनुमति योग्य चालन (_D):" #: ../iw/partition_dialog_gui.py:346 msgid "Drive:" msgstr "चालनः" #: ../iw/partition_dialog_gui.py:355 msgid "Original File System Label:" msgstr "मूल फाइल सिस्टम लेबलः" #: ../iw/partition_dialog_gui.py:390 msgid "_Start Cylinder:" msgstr "सिलेंडर प्रारंभ करें (_S):" #: ../iw/partition_dialog_gui.py:408 msgid "_End Cylinder:" msgstr "अंतिम सिलेंडर (_E):" #: ../iw/partition_dialog_gui.py:459 msgid "Force to be a _primary partition" msgstr "प्राथमिक विभाजन होने के लिए दबाव डालें (_p)" #: ../iw/partition_gui.py:365 ../textw/partition_text.py:1437 msgid "Type" msgstr "प्रकार" #: ../iw/partition_gui.py:370 ../textw/partition_text.py:1437 msgid "Start" msgstr "आरंभ" #: ../iw/partition_gui.py:371 ../textw/partition_text.py:1437 msgid "End" msgstr "अंत" #: ../iw/partition_gui.py:408 msgid "" "Mount Point/\n" "RAID/Volume" msgstr "" "आरोह बिंदु/\n" "RAID/आयतन" #: ../iw/partition_gui.py:410 msgid "" "Size\n" "(MB)" msgstr "" "आकार\n" "(MB)" #: ../iw/partition_gui.py:542 ../textw/partition_text.py:1431 msgid "Partitioning" msgstr "विभाजन कर रहा है" #: ../iw/partition_gui.py:633 msgid "The following critical errors exist with your requested partitioning scheme." msgstr "निम्नांकित गंभीर त्रुटि आपके निवेदित विभाजन योजना के साथ उपस्थित हैं." #: ../iw/partition_gui.py:636 #, python-format msgid "These errors must be corrected prior to continuing with your install of %s." msgstr "आपके %s के अधिष्ठापन से जारी होने से पहले यह त्रुटि सही किया जाना जरूरी है." #: ../iw/partition_gui.py:642 msgid "Partitioning Errors" msgstr "विभाजन करने में त्रुटि" #: ../iw/partition_gui.py:648 msgid "The following warnings exist with your requested partition scheme." msgstr "निम्नांकित चेतावनियां आपकी निवेदित विभाजन योजना के साथ उपस्थित हैं." #: ../iw/partition_gui.py:650 msgid "Would you like to continue with your requested partitioning scheme?" msgstr "क्या आप निवेदित विभाजन योजना जारी चाहते हैं?" #: ../iw/partition_gui.py:655 msgid "Partitioning Warnings" msgstr "विभाजन चेतावनियाँ" #: ../iw/partition_gui.py:677 msgid "Format Warnings" msgstr "संरुप चेतावनी" #: ../iw/partition_gui.py:682 msgid "_Format" msgstr "संरुपित करें (_F)" #: ../iw/partition_gui.py:717 msgid "LVM Volume Groups" msgstr "LVM वॉल्यूम ग्रूप" #: ../iw/partition_gui.py:752 msgid "RAID Devices" msgstr "RAID युक्तियां" #: ../iw/partition_gui.py:780 ../iw/partition_gui.py:906 #: ../textw/partition_text.py:96 ../textw/partition_text.py:159 msgid "None" msgstr "कोई नहीं " #: ../iw/partition_gui.py:798 ../loader2/hdinstall.c:327 msgid "Hard Drives" msgstr "हार्ड ड्राइव" #: ../iw/partition_gui.py:869 ../textw/partition_text.py:141 #: ../textw/partition_text.py:180 msgid "Free space" msgstr "मुक्त स्थान " #: ../iw/partition_gui.py:871 ../textw/partition_text.py:143 msgid "Extended" msgstr "विस्तारित" #: ../iw/partition_gui.py:873 ../textw/partition_text.py:145 msgid "software RAID" msgstr "सॉफ्टवेयर RAID " #: ../iw/partition_gui.py:908 msgid "Free" msgstr "मुक्त" #: ../iw/partition_gui.py:998 ../textw/partition_text.py:228 #, python-format msgid "Could not allocate requested partitions: %s." msgstr "निवेदित विभाजनों को बांट नहीं सकता था: %s." #: ../iw/partition_gui.py:1007 #, python-format msgid "Warning: %s." msgstr "चेतावनी: %s" #: ../iw/partition_gui.py:1191 ../iw/partition_gui.py:1205 msgid "Not supported" msgstr "समर्थित नहीं" #: ../iw/partition_gui.py:1192 msgid "LVM is NOT supported on this platform." msgstr "इस प्लेटफार्म पर LVM समर्थित नहीं है." #: ../iw/partition_gui.py:1206 msgid "Software RAID is NOT supported on this platform." msgstr "इस प्लेटफार्म पर सॉफ्टवेयर RAID समर्थित नहीं है." #: ../iw/partition_gui.py:1213 msgid "No RAID minor device numbers available" msgstr "कोई RAID छोटी युक्ति संख्याएं उपलब्ध नहीं" #: ../iw/partition_gui.py:1214 msgid "" "A software RAID device cannot be created because all of the available RAID " "minor device numbers have been used." msgstr "" "एक सॉफ्टवेयर RAID युक्ति नहीं बनाया सकता क्योंकि सारी उपलब्ध RAID माइनर युक्ति संख्या का " "प्रयोग हो चुका है." #: ../iw/partition_gui.py:1228 msgid "RAID Options" msgstr "RAID विकल्प" #: ../iw/partition_gui.py:1239 #, python-format msgid "" "Software RAID allows you to combine several disks into a larger RAID " "device. A RAID device can be configured to provide additional speed and " "reliability compared to using an individual drive. For more information on " "using RAID devices please consult the %s documentation.\n" "\n" "You currently have %s software RAID partition(s) free to use.\n" "\n" msgstr "" "सॉफ्टवेयर RAID आपको, कुछ डिस्कों को एक बड़ी RAID युक्ति में जोडने की अनुमति देता है. एक " "व्यक्तिगत चालन के उपयोग से अतिरिक्त गति और विश्वास देने के लिए एक RAID युक्ति को विन्यस्त " "कर सकते हैं. RAID युक्तियों के उपयोग पर अधिक जानकारी के लिए कृपया %s दस्तावेज देखें.\n" "\n" "आपके पास उपयोग के लिए वर्तमान में %s सॉफ्टवेयर RAID विभाजन हैं\n" "\n" #: ../iw/partition_gui.py:1250 msgid "" "To use RAID you must first create at least two partitions of type 'software " "RAID'. Then you can create a RAID device which can be formatted and " "mounted.\n" "\n" msgstr "" "RAID उपयोग के लिए, आप सर्वप्रथम 'सॉफ्टवेयर RAID' प्रकार के कम से कम दो विभाजन अवश्य " "बनाएँ. तब आप एक RAID युक्ति बना सकते हैं जो संरूपित और आरोहित हो सकती हैं.\n" "\n" #: ../iw/partition_gui.py:1256 msgid "What do you want to do now?" msgstr "आप अब क्या करना चाहते हैं?" #: ../iw/partition_gui.py:1265 msgid "Create a software RAID _partition." msgstr "एक सॉफ्टवेयर RAID विभाजन बनाएँ." #: ../iw/partition_gui.py:1268 #, python-format msgid "Create a RAID _device [default=/dev/md%s]." msgstr "एक RAID युक्ति [मूलभूत=/dev/md%s] बनाएँ (_d)." #: ../iw/partition_gui.py:1272 #, python-format msgid "Clone a _drive to create a RAID device [default=/dev/md%s]." msgstr "एक RAID युक्ति [मूलभूत=/dev/md%s] बनाने के लिए एक चालन को क्लोन करें (_d)" #: ../iw/partition_gui.py:1311 msgid "Couldn't Create Drive Clone Editor" msgstr "चालन क्लोन संपादक नहीं बना सका" #: ../iw/partition_gui.py:1312 msgid "The drive clone editor could not be created for some reason." msgstr "कुछ कारण से चालन क्लोन संपादक बनाया नही जा सकता." #: ../iw/partition_gui.py:1356 msgid "Ne_w" msgstr "नया (_w)" #: ../iw/partition_gui.py:1359 msgid "Re_set" msgstr "पुनःजमाएँ (_s)" #: ../iw/partition_gui.py:1360 msgid "R_AID" msgstr "R_AID" #: ../iw/partition_gui.py:1361 msgid "_LVM" msgstr "_LVM" #: ../iw/partition_gui.py:1402 msgid "Hide RAID device/LVM Volume _Group members" msgstr "RAID युक्ति/LVM वॉल्यूम ग्रूप सदस्यों को छुपाएँ (_G)" #: ../iw/partition_ui_helpers_gui.py:91 ../iw/partition_ui_helpers_gui.py:112 #: ../iw/partition_ui_helpers_gui.py:114 ../textw/partition_text.py:251 #: ../textw/partition_text.py:253 ../textw/partition_text.py:255 #: ../textw/partition_text.py:280 msgid "" msgstr "<लागू नहीं>" #: ../iw/partition_ui_helpers_gui.py:245 msgid "How would you like to prepare the file system on this partition?" msgstr "इस विभाजन पर फाइल सिस्टम को किस प्रकार तैयार करना चाहते है?" #: ../iw/partition_ui_helpers_gui.py:253 msgid "Leave _unchanged (preserve data)" msgstr "बिना बदलाव (आंकड़ा सुरक्षित करें) छोड़ें (_u)" #: ../iw/partition_ui_helpers_gui.py:259 msgid "_Format partition as:" msgstr "विभाजन का संरूप ऐसे करें (_F):" #: ../iw/partition_ui_helpers_gui.py:282 msgid "Mi_grate partition to:" msgstr "विभाजन को यहाँ उत्प्रवासन करें (_g):" #: ../iw/partition_ui_helpers_gui.py:304 msgid "Check for _bad blocks?" msgstr "बुरे खण्डों के लिए जाँचें? (_b)" #: ../iw/partition_ui_helpers_gui.py:339 #, python-format msgid "" "Partitions of type '%s' must be constrained to a single drive. This is done " "by selecting the drive in the 'Allowable Drives' checklist." msgstr "" "'%s' प्रकार के विभाजनों को आवश्य एक एकल चालन के लिए निरूद्ध होना चाहिए . यह 'स्वीकृत " "चालन' जाँच-सूची में चालन चुनने से होता हैं." #: ../iw/partmethod_gui.py:25 ../textw/partmethod_text.py:24 msgid "Disk Partitioning Setup" msgstr "डिस्क विभाजन व्यवस्था" #: ../iw/partmethod_gui.py:50 msgid "_Automatically partition" msgstr "स्वतः विभाजन करें (_A)" #: ../iw/partmethod_gui.py:53 msgid "Manually partition with _Disk Druid" msgstr "डिस्क ड्रीयूड द्वारा दस्ती रूप से विभाजन करें (_D)" #: ../iw/progress_gui.py:43 #, python-format msgid "%s MB" msgstr "%s MB" #: ../iw/progress_gui.py:46 #, python-format msgid "%s KB" msgstr "%s KB" #: ../iw/progress_gui.py:49 #, python-format msgid "%s Byte" msgstr "%s बाइट" #: ../iw/progress_gui.py:51 #, python-format msgid "%s Bytes" msgstr "%s बाइट्स" #: ../iw/progress_gui.py:55 msgid "Installing Packages" msgstr "संकुलों का अधिष्ठापन हो रहा है" #: ../iw/progress_gui.py:166 #, python-format msgid "Remaining time: %s minutes" msgstr "शेष समय: %s मिनट" #: ../iw/progress_gui.py:182 #, python-format msgid "Downloading %s" msgstr "%s डाउनलोड कर रहा है" #: ../iw/progress_gui.py:222 #, python-format msgid "Installing %s-%s-%s.%s (%s)" msgstr "%s-%s-%s.%s (%s) का अधिष्ठापन कर रहा है" #: ../iw/progress_gui.py:346 msgid "Package" msgstr "संकुल" #: ../iw/progress_gui.py:347 msgid "Summary" msgstr "सारांशः" #: ../iw/progress_gui.py:374 ../textw/progress_text.py:135 msgid "Status: " msgstr "स्थितिः" #: ../iw/raid_dialog_gui.py:251 msgid "" "At least two unused software RAID partitions are needed to create a RAID " "device.\n" "\n" "First create at least two partitions of type \"software RAID\", and then " "select the \"RAID\" option again." msgstr "" "कम से कम दो उपयोग में न लाई गई सॉफ्टवेयर RAID विभाजनों की आवश्यकता, एक RAID युक्ति " "बनाने के लिए हैं.\n" "\n" "सर्वप्रथम \"सॉफ्टवेयर RAID\" प्रकार के कम से कम दो विभाजनों को बनाएँ और तब पुनः \"RAID" "\" विकल्प चुनें." #: ../iw/raid_dialog_gui.py:265 ../iw/raid_dialog_gui.py:669 #: ../textw/partition_text.py:967 msgid "Make RAID Device" msgstr "RAID युक्ति बनाएँ" #: ../iw/raid_dialog_gui.py:268 #, python-format msgid "Edit RAID Device: /dev/md%s" msgstr "RAID युक्ति का संपादन करें: /dev/md%s" #: ../iw/raid_dialog_gui.py:270 ../textw/partition_text.py:965 msgid "Edit RAID Device" msgstr "RAID युक्ति संपादन करें" #: ../iw/raid_dialog_gui.py:311 msgid "RAID _Device:" msgstr "RAID युक्ति (_D):" #: ../iw/raid_dialog_gui.py:329 msgid "RAID _Level:" msgstr "RAID स्तर (_L):" #: ../iw/raid_dialog_gui.py:370 msgid "_RAID Members:" msgstr "_RAID सदस्यः" #: ../iw/raid_dialog_gui.py:387 msgid "Number of _spares:" msgstr "_spares की संख्याः" #: ../iw/raid_dialog_gui.py:397 msgid "_Format partition?" msgstr "विभाजन संरुपित करें? (_F)" #: ../iw/raid_dialog_gui.py:476 msgid "" "The source drive has no partitions to be cloned. You must first define " "partitions of type 'software RAID' on this drive before it can be cloned." msgstr "" "स्रोत चालन के पास क्लोन के लिए विभाजन नहीं हैं. इसे क्लोन करने से पहले आप सर्वप्रथम इस " "चालन पर 'सॉफ्टवेयर RAID' प्रकार के विभाजन का उल्लेख करें. " #: ../iw/raid_dialog_gui.py:480 ../iw/raid_dialog_gui.py:486 #: ../iw/raid_dialog_gui.py:498 ../iw/raid_dialog_gui.py:511 msgid "Source Drive Error" msgstr "स्रोत चालन त्रुटि" #: ../iw/raid_dialog_gui.py:487 msgid "" "The source drive selected has partitions on it which are not of type " "'software RAID'.\n" "\n" "These partitions will have to be removed before this drive can be cloned. " msgstr "" "चयनित स्रोत चालन पर विभाजन हैं जो 'सॉफ्टवेयर RAID' प्रकार का नहीं है.\n" "\n" "इस चालन के क्लोन करने से पहले, इन विभाजनों को हटाना पड़ेगा." #: ../iw/raid_dialog_gui.py:499 #, python-format msgid "" "The source drive selected has partitions which are not constrained to the " "drive /dev/%s.\n" "\n" "These partitions will have to be removed or restricted to this drive before " "this drive can be cloned. " msgstr "" "चयनित स्रोत चालन पर विभाजन हैं जो /dev/%s चालन के लिए निरूद्ध नहीं हैं .\n" "\n" "इस चालन को क्लोन करने से पहले इन विभाजनों को चालन में से हटाना या रोकना पड़ेगा." #: ../iw/raid_dialog_gui.py:512 msgid "" "The source drive selected has software RAID partition(s) which are members " "of an active software RAID device.\n" "\n" "These partitions will have to be removed before this drive can be cloned." msgstr "" "चयनित स्रोत चालन पर सॉफ्टवेयर RAID विभाजन हैं जो एक सक्रिय सॉफ्टवेयर RAID युक्ति का " "सदस्य है.\n" "\n" "इस चालन को क्लोन करने से पहले इन विभाजनों को हटाना पड़ेगा." #: ../iw/raid_dialog_gui.py:525 ../iw/raid_dialog_gui.py:531 #: ../iw/raid_dialog_gui.py:544 msgid "Target Drive Error" msgstr "लक्ष्य चालन त्रुटि" #: ../iw/raid_dialog_gui.py:526 msgid "Please select the target drives for the clone operation." msgstr "क्लोन प्रक्रिया के लिए कृपया लक्ष्य चालनों को चुनें." #: ../iw/raid_dialog_gui.py:532 #, python-format msgid "The source drive /dev/%s cannot be selected as a target drive as well." msgstr "स्रोत चालन /dev/%s को एक लक्ष्य चालन के रूप में चयनित नहीं हो सकता है:" #: ../iw/raid_dialog_gui.py:545 #, python-format msgid "" "The target drive /dev/%s has a partition which cannot be removed for the " "following reason:\n" "\n" "\"%s\"\n" "\n" "This partition must be removed before this drive can be a target." msgstr "" "लक्ष्य चालन /dev/%s का एक विभाजन है जो निम्नांकित कारण से हटाया नहीं जा सकता:\n" "\n" "\"%s\"\n" "\n" "यह चालन को एक लक्ष्य बनने से पहले इस विभाजन को अवश्य हटाना पड़ेगा." #: ../iw/raid_dialog_gui.py:606 msgid "Please select a source drive." msgstr "कृपया एक स्रोत चालन चुनें." #: ../iw/raid_dialog_gui.py:626 #, python-format msgid "" "The drive /dev/%s will now be cloned to the following drives:\n" "\n" msgstr "" "/dev/%s चालन का अब निम्नांकित चालनों से क्लोन होगा:\n" "\n" #: ../iw/raid_dialog_gui.py:631 msgid "" "\n" "\n" "WARNING! ALL DATA ON THE TARGET DRIVES WILL BE DESTROYED." msgstr "" "\n" "\n" "'चेतावनी! लक्ष्य चालनों पर सभी आँकड़े नष्ट हो जाएंगे." #: ../iw/raid_dialog_gui.py:634 msgid "Final Warning" msgstr "अंतिम चेतावनी" #: ../iw/raid_dialog_gui.py:636 msgid "Clone Drives" msgstr "चालनों का क्लोन करें" #: ../iw/raid_dialog_gui.py:645 msgid "There was an error clearing the target drives. Cloning failed." msgstr "लक्ष्य चालनों को साफ करने में एक त्रुटि था. क्लोनिंग असफल." #: ../iw/raid_dialog_gui.py:679 msgid "" "Clone Drive Tool\n" "\n" "This tool allows you to significantly reduce the amount of effort required " "to setup RAID arrays. The idea is to take a source drive which has been " "prepared with the desired partitioning layout, and clone this layout onto " "other similar sized drives. Then a RAID device can be created.\n" "\n" "NOTE: The source drive must have partitions which are restricted to be on " "that drive only, and can only contain unused software RAID partitions. " "Other partition types are not allowed.\n" "\n" "EVERYTHING on the target drive(s) will be destroyed by this process." msgstr "" "क्लोन चालन उपकरण\n" "\n" "यह उपकरण आपको RAID सरणियों की व्यवस्था में आवश्यक प्रयास को महत्वपूर्ण रूप से कम करने की " "अनुमति देता है. विचार यह है कि अपेक्षित विभाजन लेआउट से तैयार किया गया एक स्रोत चालन " "को लें और इस लेआउट को अन्य समान आकार की चालनों पर क्लोन करें. तब एक RAID युक्ति बनाई " "जा सकती है.\n" "\n" "नोट: स्रोत चालन में अवश्य वो विभाजन होना चाहिए जो केवल उस चालन पर निरुद्ध हैं और केवल " "अनुपयोगी सॉफ्टवेयर RAID विभाजनों को समाहित कर सकते हैं. अन्य प्रकार के विभाजन को अनुमति " "नहीं हैं.\n" "\n" "इस प्रक्रम से लक्ष्य चालन पर सब नष्ट हो जाएगा." #: ../iw/raid_dialog_gui.py:699 msgid "Source Drive:" msgstr "स्रोत चालन:" #: ../iw/raid_dialog_gui.py:707 msgid "Target Drive(s):" msgstr "लक्ष्य चालनः" #: ../iw/raid_dialog_gui.py:715 msgid "Drives" msgstr "चालन" #: ../iw/release_notes.py:153 msgid "Release notes are missing.\n" msgstr "रिलीज नोट्स नहीं मिल रहा है.\n" #: ../iw/release_notes.py:212 msgid "Release Notes" msgstr "रिलीज नोट्स" #: ../iw/release_notes.py:216 msgid "Unable to load file!" msgstr "फाइल भारित करने में असमर्थ!" #: ../iw/timezone_gui.py:60 ../textw/timezone_text.py:90 msgid "Time Zone Selection" msgstr "समय क्षेत्र चुनाव" #: ../iw/upgrade_bootloader_gui.py:27 ../textw/upgrade_bootloader_text.py:72 msgid "Upgrade Boot Loader Configuration" msgstr "बूट लोडर विन्यास का उन्नयन करें" #: ../iw/upgrade_bootloader_gui.py:66 msgid "_Update boot loader configuration" msgstr "बूट लोडर विन्यास का उन्नयन करें" #: ../iw/upgrade_bootloader_gui.py:67 msgid "This will update your current boot loader." msgstr "यह आपका वर्तमान बूट लोडर अद्यतन करेगा." #: ../iw/upgrade_bootloader_gui.py:70 ../textw/upgrade_bootloader_text.py:49 #, python-format msgid "The installer has detected the %s boot loader currently installed on %s." msgstr "अधिष्ठापक ने %s बूट लोडर को वर्तमान में %s पर अधिष्ठापित हुआ खोजा है." #: ../iw/upgrade_bootloader_gui.py:74 msgid "This is the recommended option." msgstr "यह अनुशंसित विकल्प है." #: ../iw/upgrade_bootloader_gui.py:78 ../textw/upgrade_bootloader_text.py:57 msgid "" "The installer is unable to detect the boot loader currently in use on your " "system." msgstr "आपके सिस्टम पर वर्तमान में प्रयुक्त बूट लोडर को जाँचने में अधिष्ठापक असमर्थ हैं." #: ../iw/upgrade_bootloader_gui.py:87 msgid "_Create new boot loader configuration" msgstr "नया बूट लोडर विन्यास बनाएँ (_C)" #: ../iw/upgrade_bootloader_gui.py:89 msgid "" "This will let you create a new boot loader configuration. If you wish to " "switch boot loaders, you should choose this." msgstr "" "यह आपको एक नया बूट लोडर विन्यास बनाने में लागू करेगा. यदि आप बूट लोडरों को स्विच करना " "चाहते हैं आपको इसे चुनना हैं." #: ../iw/upgrade_bootloader_gui.py:96 msgid "_Skip boot loader updating" msgstr "बूट लोडर अद्यतन छोड़ें" #: ../iw/upgrade_bootloader_gui.py:97 msgid "" "This will make no changes to boot loader configuration. If you are using a " "third party boot loader, you should choose this." msgstr "" "यह बूट लोडर विन्यास में कोई परिवर्तन नहीं लाएगा. यदि आप एक तृतीय बूट लोडर समूह का " "उपयोग कर रहे हैं, आप इसे चुनें." #: ../iw/upgrade_bootloader_gui.py:109 msgid "What would you like to do?" msgstr "आप क्या करना चाहते हैं?" #: ../iw/upgrade_migratefs_gui.py:28 ../textw/upgrade_text.py:33 msgid "Migrate File Systems" msgstr "फाइल सिस्टमों का उत्प्रवासन करें" #: ../iw/upgrade_migratefs_gui.py:52 ../textw/upgrade_text.py:35 #, python-format msgid "" "This release of %s supports the ext3 journalling file system. It has " "several benefits over the ext2 file system traditionally shipped in %s. It " "is possible to migrate the ext2 formatted partitions to ext3 without data " "loss.\n" "\n" "Which of these partitions would you like to migrate?" msgstr "" "%s का यह विमोचन ext3 जर्नलिंग फाइल सिस्टम का समर्थन करता है. यह पारंपरिक रूप से %s में " "लाये गये ext2 फाइल सिस्टम के बनिस्पत कई लाभ देता है. यह संभव है कि ext2 संरूपित विभाजनों " "से ext3 में बिना आंकड़ा हानि के उत्प्रवास हो जाए.\n" "\n" "इन विभाजनों में से किसमें आप उत्प्रवासित होना चाहते हैं?" #: ../iw/upgrade_swap_gui.py:29 msgid "Upgrade Swap Partition" msgstr "स्वैप विभाजन का उन्नयन करें" #: ../iw/upgrade_swap_gui.py:89 #, python-format msgid "" "The 2.4 kernel needs significantly more swap than older kernels, as much as " "twice as much swap space as RAM on the system. You currently have %dMB of " "swap configured, but you may create additional swap space on one of your " "file systems now." msgstr "" "2.4 कर्नल को पुराने कर्नलों से अधिक स्वैप स्थान की आवश्यकता होती है, जो सिस्टम के RAM से " "दुगुना हैं. आपके पास वर्तमान में %dMB का स्वैप विन्यस्त है, परंतु अब आप आपके फाइल सिस्टमों में से " "एक पर अतिरिक्त स्वैप स्थान बना सकते हैं." #: ../iw/upgrade_swap_gui.py:96 #, python-format msgid "" "\n" "\n" "The installer has detected %s MB of RAM.\n" msgstr "" "\n" "\n" "अधिष्ठापक ने %s MB का RAM खोजा है.\n" #: ../iw/upgrade_swap_gui.py:108 msgid "I _want to create a swap file" msgstr "मैं एक स्वैप फाइल बनाना चाहता हूं (_w)" #: ../iw/upgrade_swap_gui.py:117 msgid "Select the _partition to put the swap file on:" msgstr "स्वैप फाइल को डालने के लिए विभाजन चुनें (_p):" #: ../iw/upgrade_swap_gui.py:136 ../textw/upgrade_text.py:109 msgid "Partition" msgstr "विभाजन" #: ../iw/upgrade_swap_gui.py:136 msgid "Free Space (MB)" msgstr "मुक्त स्थान (MB)" #: ../iw/upgrade_swap_gui.py:154 #, python-format msgid "" "It is recommended that your swap file be at least %d MB. Please enter a " "size for the swap file:" msgstr "" "यह अनुशंसित है कि आपकी स्वैप फाइल कम से कम %d MB का होना चाहिए. कृपया स्वैप फाइल के " "लिए एक आकार दाखिल करें:" #: ../iw/upgrade_swap_gui.py:169 msgid "Swap file _size (MB):" msgstr "स्वैप फाइल आकार (MB) (_s):" #: ../iw/upgrade_swap_gui.py:179 msgid "I _don't want to create a swap file" msgstr "मैं एक स्वैप फाइल नहीं बनाना चाहता हूं (_d)" #: ../iw/upgrade_swap_gui.py:189 msgid "" "It is stongly recommended that you create a swap file. Failure to do so " "could cause the installer to abort abnormally. Are you sure that you wish " "to continue?" msgstr "" "यह अनुशंसित हैं कि आप एक स्वैप फाइल बनाएँ. इसमें असफल रहने से अधिष्ठापक असामान्य रूप से " "विफल होगा. क्या आप निश्चित हैं कि आप जारी रखना चाहते हैं?" #: ../iw/upgrade_swap_gui.py:197 ../textw/upgrade_text.py:175 msgid "The swap file must be between 1 and 2000 MB in size." msgstr "स्वैप फाइल का आकार 1 और 2000 MB के बीच जरूर होना चाहिए." #: ../iw/upgrade_swap_gui.py:204 ../textw/upgrade_text.py:170 msgid "There is not enough space on the device you selected for the swap partition." msgstr "आपके द्वारा चयनित युक्ति पर स्वैप विभाजन के लिए स्थान पर्याप्त नहीं हैं." #: ../iw/zfcp_gui.py:24 msgid "ZFCP Configuration" msgstr "ZFCP विन्यास" #: ../iw/zfcp_gui.py:103 msgid "_Remove" msgstr "हटाएं (_R)" #: ../iw/zfcp_gui.py:110 ../textw/zfcp_text.py:115 msgid "FCP Devices" msgstr "FCP युक्तियां" #: ../iw/zfcp_gui.py:121 msgid "Add FCP device" msgstr "FCP युक्ति जोड़ें" #: ../iw/zfcp_gui.py:184 #, python-format msgid "Edit FCP device %s" msgstr "FCP युक्ति %s संपादन करें" #: ../iw/zfcp_gui.py:248 msgid "" "You're about to remove a FCP disk from your configuration. Are you sure that " "you wish to continue?" msgstr "" "आप FCP डिस्क को अपने विन्यास से निकालने के करीब हैं. क्या यह सुनिश्चित है कि आप जारी " "रखना चाहते हैं?" #: ../iw/zipl_gui.py:28 msgid "z/IPL Boot Loader Configuration" msgstr "z/IPL बूट लोडर विन्यास " #: ../iw/zipl_gui.py:52 msgid "The z/IPL boot loader will be installed on your system." msgstr "z/IPL बूट लोडर आपके सिस्टम पर अधिष्ठापित होगा." #: ../iw/zipl_gui.py:54 msgid "" "The z/IPL Boot Loader will now be installed on your system.\n" "\n" "The root partition will be the one you selected previously in the partition " "setup.\n" "\n" "The kernel used to start the machine will be the one to be installed by " "default.\n" "\n" "If you wish to make changes later after the installation feel free to change " "the /etc/zipl.conf configuration file.\n" "\n" "You can now enter any additional kernel parameters which your machine or " "your setup may require." msgstr "" "z/IPL बूट भारित अब आपके सिस्टम पर अधिष्ठापित होगा.\n" "\n" "रूट विभाजन वो होगा जो विभाजन व्यवस्था में से आपने पहले चयनित किया था.\n" "\n" "मशीन प्रारंभ करने के लिए उपयोगी कर्नल मूलभूत रूप से अधिष्ठापित होगा.\n" "\n" "यदि आप अधिष्ठापन के बाद बदलाव बनाना चाहते हैं तो /etc/zipl.conf को विन्यास करने में " "मुक्त अनुभव करें\n" "\n" "आप अब कोई अतिरिक्त कर्नल पैरामीटरों को दाखिल कर सकते हैं जो आपकी मशीन या आपकी " "व्यवस्था को आवश्यकता हो सकती है." #: ../iw/zipl_gui.py:81 ../textw/zipl_text.py:62 msgid "Kernel Parameters" msgstr "कर्नल पैरामीटर" #: ../iw/zipl_gui.py:84 ../iw/zipl_gui.py:87 msgid "Chandev Parameters" msgstr "चनडेव पैरामीटर" #: ../textw/bootloader_text.py:28 msgid "Which boot loader would you like to use?" msgstr "कौन सा आप बूट लोडर प्रयोग करना पसंद करेंगे?" #: ../textw/bootloader_text.py:38 msgid "Use GRUB Boot Loader" msgstr "GRUB बूट लोडर का प्रयोग करें " #: ../textw/bootloader_text.py:39 msgid "No Boot Loader" msgstr "बूट लोडर नहीं है" #: ../textw/bootloader_text.py:59 msgid "Skip Boot Loader" msgstr "बूट लोडर छोड़ें " #: ../textw/bootloader_text.py:60 msgid "" "You have elected to not install any boot loader. It is strongly recommended " "that you install a boot loader unless you have an advanced need. A boot " "loader is almost always required in order to reboot your system into Linux " "directly from the hard drive.\n" "\n" "Are you sure you want to skip boot loader installation?" msgstr "" "आपने कोई बूट लोडर अधिष्ठापन करने के लिए चयनित नहीं किया है. यह अनुशंसित है कि आप एक बूट " "लोडर अधिष्ठापन करें जब तक आपको एक अग्रिम आवश्यकता नहीं है. एक बूट लोडर की हमेशा " "आवश्यकता होती है जब भी हार्डड्राइव से आपके सिस्टम को Linux के लिए रीबूट करना है.\n" "\n" "क्या आप निश्चित हैं कि बूट लोडर का अधिष्ठापन छोड़ना चाहते हैं?" #: ../textw/bootloader_text.py:93 msgid "" "A few systems will need to pass special options to the kernel at boot time " "for the system to function properly. If you need to pass boot options to the " "kernel, enter them now. If you don't need any or aren't sure, leave this " "blank." msgstr "" "उचित रूप से सिस्टम के कार्य होने के लिए कुछ सिस्टमों को बूट समय पर कर्नल को विशेष विकल्प " "अवश्य भेजने होंगे. यदि आपको बूट कर्नल को विकल्प भेजना हैं, अब उन्हें दाखिल करें. यदि आपको " "इनकी कोई आवश्यकता नहीं या निश्चित नहीं हैं, इसे खाली छोड़ें." #: ../textw/bootloader_text.py:102 msgid "Force use of LBA32 (not normally required)" msgstr "LBA32 के प्रयोग पर दबाव डालें (सामान्यतः आवश्यक नहीं)" #: ../textw/bootloader_text.py:166 msgid "Where do you want to install the boot loader?" msgstr "आप बूट लोडर को कहां अधिष्ठापित करना चाहते हैं?" #: ../textw/bootloader_text.py:194 ../textw/bootloader_text.py:259 msgid "Boot label" msgstr "बूट लेबल" #: ../textw/bootloader_text.py:198 msgid "Clear" msgstr "साफ करें" #: ../textw/bootloader_text.py:206 msgid "Edit Boot Label" msgstr "बूट लेबल संपादन करें" #: ../textw/bootloader_text.py:224 ../textw/bootloader_text.py:229 msgid "Invalid Boot Label" msgstr "अमान्य बूट लेबल" #: ../textw/bootloader_text.py:225 msgid "Boot label may not be empty." msgstr "बूट लेबल खाली नहीं हो सकती." #: ../textw/bootloader_text.py:230 msgid "Boot label contains illegal characters." msgstr "बूट लेबल में अवैध संप्रतीक समाहित हैं." #: ../textw/bootloader_text.py:274 ../textw/partition_text.py:1442 #: ../textw/zfcp_text.py:108 msgid "Edit" msgstr "संपादन करें" #: ../textw/bootloader_text.py:278 #, python-format msgid "" "The boot manager %s uses can boot other operating systems as well. You need " "to tell me what partitions you would like to be able to boot and what label " "you want to use for each of them." msgstr "" "%s बूट प्रबंधक अन्य ऑपरेटिंग सिस्टमों को भी बूट कर सकता है. आपको मुझे बताना जरूरी है कि " "कौन-सा विभाजन आप बूट करने में समर्थ होंगे और प्रत्येक के लिए किस स्तर का प्रयोग आप प्रत्येक " "के साथ करना चाहते हैं." #: ../textw/bootloader_text.py:291 msgid " select | select default | delete | next screen>" msgstr " चुनें | मूलभूत चुनिये | मिटायें | अगला स्क्रीन>" #: ../textw/bootloader_text.py:387 msgid "" "A boot loader password prevents users from passing arbitrary options to the " "kernel. For highest security, we recommend setting a password, but this is " "not necessary for more casual users." msgstr "" "उपयोक्ताओं को एक बूट लोडर शब्दकूट कर्नल को काल्पनिक विकल्प भेजने से रोकता है. अधिकतम " "सुरक्षा के लिए हम शब्दकूट व्यवस्था के लिए अनुशंसित करते हैं, परंतु यह अधिक साधारण उपयोक्ताओं " "के लिए आवश्यक नहीं हैं." #: ../textw/bootloader_text.py:397 msgid "Use a GRUB Password" msgstr "एक GRUB शब्दकूट का प्रयोग करें" #: ../textw/bootloader_text.py:409 msgid "Boot Loader Password:" msgstr "बूट लोडर शब्दकूटः" #: ../textw/bootloader_text.py:410 msgid "Confirm:" msgstr "निश्चित करें:" #: ../textw/bootloader_text.py:439 msgid "Passwords Do Not Match" msgstr "शब्दकूट मेल नहीं खा रहा है" #: ../textw/bootloader_text.py:444 msgid "Password Too Short" msgstr "शब्दकूट बहुत छोटा है" #: ../textw/bootloader_text.py:445 msgid "Boot loader password is too short" msgstr "बूट लोडर शब्दकूट बहुत छोटा है" #: ../textw/complete_text.py:27 msgid "" "Press to end the installation process.\n" "\n" msgstr "" "अधिष्ठापन प्रक्रिया को समाप्त करने के लिए दबाएँ.\n" "\n" #: ../textw/complete_text.py:28 msgid " to exit" msgstr "बाहर निकलने के लिए " #: ../textw/complete_text.py:30 msgid "" "Remove any media used during the installation process and press to " "reboot your system.\n" "\n" msgstr "" "अधिष्ठापन प्रक्रिया के समय प्रयुक्त किसी माध्यम को हटाएँ और अपने सिस्टम को रीबूट करने के " "लिये दबायें.\n" "\n" #: ../textw/complete_text.py:33 msgid " to reboot" msgstr "रिबूट के लिए " #: ../textw/complete_text.py:37 #, python-format msgid "" "Congratulations, your %s installation is complete.\n" "\n" "%s%s" msgstr "" "बधाई, आपका %s अधिष्ठापन पूर्ण हुआ.\n" "\n" "%s%s" #: ../textw/complete_text.py:40 #, python-format msgid "" "For information on errata (updates and bug fixes), visit http://www.redhat." "com/errata/.\n" "\n" "Information on using your system is available in the %s manuals at http://" "www.redhat.com/docs/." msgstr "" "इरेटा (नवीनीकरण एवं बग निर्धारण) से संबंधित सूचना के लिए देखें:\n" "http://www.redhat.com/errata/. \n" "आपके सिस्टम के उपयोग के लिए जानकारी %s मैनुअल में http://www.redhat.com/docs/ पर " "उपलब्ध है" #: ../textw/complete_text.py:46 msgid "Complete" msgstr "समाप्त" #: ../textw/confirm_text.py:22 msgid "Installation to begin" msgstr "आरंभ करने के लिये अधिष्ठापन" #: ../textw/confirm_text.py:23 #, python-format msgid "" "A complete log of your installation will be in %s after rebooting your " "system. You may want to keep this file for later reference." msgstr "" "आपके सिस्टम को रीबूट करने के बाद आपके अधिष्ठापन का एक पूर्ण लॉग %s में होगा. बाद के संदर्भ " "के लिए आप यह फाइल रख सकते हैं." #: ../textw/confirm_text.py:26 ../textw/confirm_text.py:28 #: ../textw/confirm_text.py:54 ../textw/confirm_text.py:56 #: ../textw/constants_text.py:44 ../loader2/cdinstall.c:386 #: ../loader2/driverdisk.c:270 ../loader2/driverdisk.c:301 #: ../loader2/driverdisk.c:386 ../loader2/driverselect.c:70 #: ../loader2/driverselect.c:182 ../loader2/driverselect.c:208 #: ../loader2/hdinstall.c:327 ../loader2/hdinstall.c:381 ../loader2/kbd.c:128 #: ../loader2/loader.c:329 ../loader2/loader.c:926 ../loader2/loader.c:948 #: ../loader2/net.c:251 ../loader2/net.c:289 ../loader2/net.c:562 #: ../loader2/net.c:1109 ../loader2/nfsinstall.c:54 ../loader2/urls.c:266 #: ../loader2/urls.c:456 msgid "Back" msgstr "पीछे" #: ../textw/confirm_text.py:50 msgid "Upgrade to begin" msgstr "प्रारंभ करने के लिए उन्नयन करें" #: ../textw/confirm_text.py:51 #, python-format msgid "" "A complete log of your upgrade will be in %s after rebooting your system. " "You may want to keep this file for later reference." msgstr "" "अपने सिस्टम को रीबूट करने के बाद आपके उन्नयन का एक पूर्ण लॉग %s में होगा. बाद के संदर्भ के " "लिए आप इस फाइल को रख सकते हैं." #: ../textw/grpselect_text.py:83 msgid "Please select the package groups you would like to have installed." msgstr "संकुल समूह चुनें जिसे आप अधिष्ठापित करना चाहेंगे." #: ../textw/grpselect_text.py:101 msgid ",<+>,<-> selection | Group Details | next screen" msgstr ",<+>,<-> चुनाव | समूह विवरण | अगला स्क्रीन" #: ../textw/grpselect_text.py:129 msgid "Package Group Details" msgstr "संकुल समूह विवरण" #: ../textw/iscsi_text.py:35 msgid "Target IP address:" msgstr "लक्ष्य IP पताः" #: ../textw/iscsi_text.py:42 msgid "Port Number:" msgstr "पोर्ट संख्या:" #: ../textw/iscsi_text.py:49 msgid "iSCSI Initiator Name:" msgstr "iSCSI आरंभकर्ता नाम:" #: ../textw/iscsi_text.py:70 ../textw/network_text.py:29 msgid "Invalid IP string" msgstr "अमान्य IP स्ट्रिंग" #: ../textw/iscsi_text.py:71 ../textw/network_text.py:30 #, python-format msgid "The entered IP '%s' is not a valid IP." msgstr "दाखिल IP '%s' अमान्य IP है." #: ../textw/keyboard_text.py:38 msgid "Keyboard Selection" msgstr "कुंजीपटल चुनाव" #: ../textw/keyboard_text.py:39 msgid "Which model keyboard is attached to this computer?" msgstr "इस कंप्यूटर से किस माडल का कुंजीपटल संलग्न है?" #: ../textw/mouse_text.py:39 msgid "What device is your mouse located on?" msgstr "कौन-सी युक्ति पर आपका माउस अवस्थित है?" #: ../textw/mouse_text.py:71 msgid "Which model mouse is attached to this computer?" msgstr "इस कंप्यूटर से किस माडल का माउस संलग्न है?" #: ../textw/mouse_text.py:82 msgid "Emulate 3 Buttons?" msgstr "3 बटनों का सिस्टमानुकरण करें?" #: ../textw/mouse_text.py:85 msgid "Mouse Selection" msgstr "माउस चुनाव" #: ../textw/network_text.py:67 msgid "IP Address" msgstr "IP पता" #: ../textw/network_text.py:68 msgid "Netmask" msgstr "नेटमास्क" #: ../textw/network_text.py:70 msgid "Point to Point (IP)" msgstr "बिंदु से बिंदु (IP)" #: ../textw/network_text.py:74 ../loader2/net.c:246 msgid "ESSID" msgstr "ESSID" #: ../textw/network_text.py:75 ../loader2/net.c:247 msgid "Encryption Key" msgstr "गोपन कुंजी" #: ../textw/network_text.py:87 #, python-format msgid "Network Device: %s" msgstr "संजाल युक्ति: %s" #: ../textw/network_text.py:93 #, python-format msgid "Description: %s" msgstr "वर्णन: %s" #: ../textw/network_text.py:97 #, python-format msgid "Hardware Address: %s" msgstr "हार्डवेयर पता: %s" #: ../textw/network_text.py:102 msgid "Configure using DHCP" msgstr "DHCP के प्रयोग से विन्यास करें" #: ../textw/network_text.py:115 msgid "Activate on boot" msgstr "बूट पर सक्रिय करें" #: ../textw/network_text.py:141 #, python-format msgid "Network Configuration for %s" msgstr "%s के लिए संजाल विन्यास" #: ../textw/network_text.py:174 msgid "Invalid information" msgstr "अमान्य जानकारी" #: ../textw/network_text.py:175 msgid "You must enter valid IP information to continue" msgstr "जारी रखने के लिए आपको उचित IP जानकारी अवश्य देना हैं" #: ../textw/network_text.py:259 msgid "Gateway:" msgstr "गेटवे:" #: ../textw/network_text.py:269 msgid "Primary DNS:" msgstr "प्राथमिक DNS:" #: ../textw/network_text.py:274 msgid "Secondary DNS:" msgstr "द्वितीयक DNS:" #: ../textw/network_text.py:279 msgid "Tertiary DNS:" msgstr "तृतीयक DNS:" #: ../textw/network_text.py:286 msgid "Miscellaneous Network Settings" msgstr "विविध संजाल जमावट" #: ../textw/network_text.py:354 msgid "automatically via DHCP" msgstr "DHCP द्वारा स्वतः " #: ../textw/network_text.py:358 msgid "manually" msgstr "दस्ती रूप से" #: ../textw/network_text.py:377 msgid "Hostname Configuration" msgstr "मेजबाननाम विन्यास" #: ../textw/network_text.py:380 msgid "" "If your system is part of a larger network where hostnames are assigned by " "DHCP, select automatically via DHCP. Otherwise, select manually and enter in " "a hostname for your system. If you do not, your system will be known as " "'localhost.'" msgstr "" "यदि आपका सिस्टम एक बड़े संजाल का भाग हैं जहाँ मेजबाननाम DHCP द्वारा दिए जाते हैं, DHCP " "द्वारा स्वतः चुनें. अन्यथा दस्ती रूप से चुनें और अपने सिस्टम के लिए एक मेजबाननाम दाखिल करें. " "यदि आप नहीं करते हैं, आपका सिस्टम 'localhost' के रूप में जाना जाएगा." #: ../textw/network_text.py:406 ../textw/network_text.py:412 msgid "Invalid Hostname" msgstr "अमान्य मेजबाननाम" #: ../textw/network_text.py:407 msgid "You have not specified a hostname." msgstr "आपने एक मेजबाननाम को निर्दिष्ट नहीं किया है." #: ../textw/partition_text.py:42 msgid "Must specify a value" msgstr "एक मूल्य अवश्य निर्दिष्ट करें" #: ../textw/partition_text.py:45 msgid "Requested value is not an integer" msgstr "निवेदित मूल्य एक पूर्णांक नहीं है" #: ../textw/partition_text.py:47 msgid "Requested value is too large" msgstr "निवेदित मूल्य बहुत बड़ा है" #: ../textw/partition_text.py:101 #, python-format msgid "RAID Device %s" msgstr "RAID युक्ति %s" #: ../textw/partition_text.py:231 #, python-format msgid "Warning: %s" msgstr "चेतावनीः %s" #: ../textw/partition_text.py:232 msgid "Modify Partition" msgstr "विभाजन रूपांतरित करें" #: ../textw/partition_text.py:232 msgid "Add anyway" msgstr "फिर भी जोड़ें" #: ../textw/partition_text.py:270 msgid "Mount Point:" msgstr "आरोह बिंदुः" #: ../textw/partition_text.py:322 msgid "File System type:" msgstr "फाइल सिस्टम प्रकारः" #: ../textw/partition_text.py:356 msgid "Allowable Drives:" msgstr "लागू चालनः" #: ../textw/partition_text.py:412 msgid "Fixed Size:" msgstr "निश्चित आकारः" #: ../textw/partition_text.py:414 msgid "Fill maximum size of (MB):" msgstr "(MB) का अधिकतम आकार भरें:" #: ../textw/partition_text.py:418 msgid "Fill all available space:" msgstr "सभी उपलब्ध स्थान भरें:" #: ../textw/partition_text.py:441 msgid "Start Cylinder:" msgstr "सिलेंडर आरंभ करें:" #: ../textw/partition_text.py:454 msgid "End Cylinder:" msgstr "अंत सिलेंडरः" #: ../textw/partition_text.py:477 msgid "Volume Group:" msgstr "वॉल्यूम ग्रूप:" #: ../textw/partition_text.py:499 msgid "RAID Level:" msgstr "RAID स्तरः" #: ../textw/partition_text.py:517 msgid "RAID Members:" msgstr "RAID सदस्यः" #: ../textw/partition_text.py:536 msgid "Number of spares?" msgstr "अतिरिक्तों की संख्या?" #: ../textw/partition_text.py:550 msgid "File System Type:" msgstr "फाइल सिस्टम प्रकारः" #: ../textw/partition_text.py:563 msgid "File System Label:" msgstr "फाइल सिस्टम लेबलः" #: ../textw/partition_text.py:574 msgid "File System Option:" msgstr "फाइल सिस्टम विकल्पः" #: ../textw/partition_text.py:577 ../textw/partition_text.py:815 #: ../textw/partition_text.py:1052 ../textw/partition_text.py:1222 #, python-format msgid "Format as %s" msgstr "%s की तरह संरुपित करें" #: ../textw/partition_text.py:579 ../textw/partition_text.py:817 #: ../textw/partition_text.py:1054 ../textw/partition_text.py:1224 #, python-format msgid "Migrate to %s" msgstr "%s को उत्प्रवासन" #: ../textw/partition_text.py:581 ../textw/partition_text.py:819 #: ../textw/partition_text.py:1056 ../textw/partition_text.py:1226 msgid "Leave unchanged" msgstr "बिना बदले छोड़ें" #: ../textw/partition_text.py:597 ../textw/partition_text.py:792 #: ../textw/partition_text.py:1032 ../textw/partition_text.py:1202 msgid "File System Options" msgstr "फाइल सिस्टम विकल्प" #: ../textw/partition_text.py:600 msgid "" "Please choose how you would like to prepare the file system on this " "partition." msgstr "कृपया चुनें कि आप इस विभाजन पर फाइल सिस्टम को कैसे तैयार करना पसंद करेंगे." #: ../textw/partition_text.py:608 msgid "Check for bad blocks" msgstr "बुरे खंडों के लिए जांचें" #: ../textw/partition_text.py:612 msgid "Leave unchanged (preserve data)" msgstr "बिना बदले छोड़ें (आंकड़ा संरक्षित करें)" #: ../textw/partition_text.py:621 msgid "Format as:" msgstr "इस तरह संरुपित करें:" #: ../textw/partition_text.py:641 msgid "Migrate to:" msgstr "को उत्प्रवासनः" #: ../textw/partition_text.py:753 msgid "Force to be a primary partition" msgstr "एक प्राथमिक विभाजन होने के लिए दबाव डालें" #: ../textw/partition_text.py:770 msgid "Not Supported" msgstr "समर्थित नहीं" #: ../textw/partition_text.py:771 msgid "LVM Volume Groups can only be edited in the graphical installer." msgstr "केवल आलेखी अधिष्ठापक में LVM वॉल्यूम ग्रूपों को संपादित किया जा सकता है." #: ../textw/partition_text.py:847 ../textw/partition_text.py:900 msgid "Invalid Entry for Partition Size" msgstr "विभाजन आकार के लिए अमान्य प्रविष्टि" #: ../textw/partition_text.py:859 msgid "Invalid Entry for Maximum Size" msgstr "अधिकतम आकार के लिए अमान्य प्रविष्टि" #: ../textw/partition_text.py:878 msgid "Invalid Entry for Starting Cylinder" msgstr "आरंभ सिलेंडर के लिए अमान्य प्रविष्टि" #: ../textw/partition_text.py:892 msgid "Invalid Entry for End Cylinder" msgstr "अंत सिलेंडर के लिए अमान्य प्रविष्टि" #: ../textw/partition_text.py:1005 msgid "No RAID partitions" msgstr "कोई RAID विभाजन नहीं" #: ../textw/partition_text.py:1006 msgid "At least two software RAID partitions are needed." msgstr "कम से कम दो सॉफ्टवेयर RAID विभाजनों की आवश्यता होती है." #: ../textw/partition_text.py:1018 ../textw/partition_text.py:1189 msgid "Format partition?" msgstr "विभाजन संरुपित करें?" #: ../textw/partition_text.py:1080 msgid "Invalid Entry for RAID Spares" msgstr "RAID अतिरिक्तों के लिए अमान्य प्रविष्टि" #: ../textw/partition_text.py:1093 msgid "Too many spares" msgstr "बहुत सारे अतिरिक्त" #: ../textw/partition_text.py:1094 msgid "The maximum number of spares with a RAID0 array is 0." msgstr "RAID0 सरणी के साथ अधिकतम अतिरिक्त क्रमांक 0 हैं." #: ../textw/partition_text.py:1175 msgid "No Volume Groups" msgstr "कोई वॉल्यूम ग्रूप नहीं" #: ../textw/partition_text.py:1176 msgid "No volume groups in which to create a logical volume" msgstr "लॉजिकल वॉल्यूम बनाने के लिए कोई वॉल्यूम ग्रूप नहीं है" #: ../textw/partition_text.py:1292 #, python-format msgid "" "The current requested size (%10.2f MB) is larger than maximum logical volume " "size (%10.2f MB). " msgstr "" "वर्तमान में निवेदित आकार (%10.2f MB) अधिकतम लॉजिकल वॉल्यूम आकार (%10.2f MB) से बड़ा " "है." #: ../textw/partition_text.py:1311 #, python-format msgid "" "The current requested size (%10.2f MB) is larger than the available size in " "the volume group (%10.2f MB)." msgstr "वर्तमान में निवेदित आकार (%10.2f MB) वॉल्यूम ग्रूप में उपलब्ध आकार (%10.2f MB) से बड़ा है." #: ../textw/partition_text.py:1365 msgid "New Partition or Logical Volume?" msgstr "लॉजिकल वॉल्यूम या नया विभाजन?" #: ../textw/partition_text.py:1366 msgid "Would you like to create a new partition or a new logical volume?" msgstr "क्या आप एक नया विभाजन या एक लॉजिकल वॉल्यूम निर्मित करना चाहेंगे?" #: ../textw/partition_text.py:1368 msgid "partition" msgstr "विभाजन" #: ../textw/partition_text.py:1368 msgid "logical volume" msgstr "लॉजिकल वॉल्यूम" #: ../textw/partition_text.py:1441 msgid "New" msgstr "नया" #: ../textw/partition_text.py:1443 msgid "Delete" msgstr "मिटायें" #: ../textw/partition_text.py:1444 msgid "RAID" msgstr "RAID" #: ../textw/partition_text.py:1447 msgid " F1-Help F2-New F3-Edit F4-Delete F5-Reset F12-OK " msgstr "" " F1-सहायता F2-नया F3-संपादन करें F4-विलोपित करें F5-पुनःजमाएँ F12-" "ठीक " #: ../textw/partition_text.py:1476 msgid "No Root Partition" msgstr "रूट विभाजन नहीं" #: ../textw/partition_text.py:1477 msgid "Must have a / partition to install on." msgstr "अधिष्ठापन के लिए एक / विभाजन अवश्य होना है." #: ../textw/partition_text.py:1516 msgid "Partitioning Type" msgstr "विभाजन प्रकार" #: ../textw/partition_text.py:1518 tmp/autopart.glade.h:1 msgid "" "Installation requires partitioning of your hard drive. By default, a " "partitioning layout is chosen which is reasonable for most users. You can " "either choose to use this or create your own." msgstr "" "अधिष्ठापन के लिये आपके हार्ड ड्राइव के विभाजन की जरूरत है. मूलभूत रूप से, एक विभाजनकारी " "लेआउट चुना गया है जो कि ज्यादातर उपयोक्ता के लिये तार्किक है. या तो आप इसे प्रयोग के लिये " "चुन सकते हैं या अपना स्वयं का बना सकते हैं." #: ../textw/partition_text.py:1543 msgid "Which drive(s) do you want to use for this installation?" msgstr "इस अधिष्ठापन के लिए किन चालन का आप प्रयोग करना चाहते हैं?" #: ../textw/partition_text.py:1601 msgid "Review Partition Layout" msgstr "विभाजनकारी लेआउट की समीक्षा करें" #: ../textw/partition_text.py:1602 msgid "Review and modify partitioning layout?" msgstr "विभाजनकारी लेआउट की समीक्षा व रूपांतरण करें?" #: ../textw/partmethod_text.py:26 msgid "Autopartition" msgstr "स्वतःविभाजन" #: ../textw/partmethod_text.py:27 msgid "Disk Druid" msgstr "डिस्क ड्रुइड" #: ../textw/progress_text.py:66 #, python-format msgid "Downloading - %s" msgstr "भारित कर रहा है - %s" #: ../textw/progress_text.py:103 msgid "Package Installation" msgstr "संकुल अधिष्ठापन" #: ../textw/progress_text.py:105 msgid " Name : " msgstr " नाम : " #: ../textw/progress_text.py:106 msgid " Size : " msgstr "आकार : " #: ../textw/progress_text.py:107 msgid " Summary: " msgstr " सारांशः " #: ../textw/progress_text.py:152 msgid " Packages" msgstr " संकुल" #: ../textw/progress_text.py:153 msgid " Bytes" msgstr " बाइट्स" #: ../textw/progress_text.py:154 msgid " Time" msgstr " समय" #: ../textw/progress_text.py:156 msgid "Total :" msgstr "कुल :" #: ../textw/progress_text.py:163 msgid "Completed: " msgstr "पूर्ण हुआ. " #: ../textw/progress_text.py:173 msgid "Remaining: " msgstr "शेष: " #: ../textw/task_text.py:42 msgid "Package selection" msgstr "संकुल चयन" #: ../textw/task_text.py:45 #, python-format msgid "" "The default installation of %s includes a set of software applicable for " "general internet usage. What additional tasks would you like your system to " "include support for?" msgstr "" "%s के मूलभूत अधिष्ठापन में सामान्य इंटरनेट प्रयोग के लिये अनुप्रयुक्त सॉफ्टवेयर समाहित करता है. " "किस अतिरिक्त कार्य के लिये आप सिस्टम में समर्थन शामिल करना चाहेंगे?" #: ../textw/task_text.py:60 msgid "Customize software selection" msgstr "पसंदीदा सॉफ्टवेयर चुनाव" #: ../textw/timezone_text.py:72 msgid "What time zone are you located in?" msgstr "किस समय क्षेत्र में आप अवस्थित हैं?" #: ../textw/timezone_text.py:87 msgid "System clock uses UTC" msgstr "सिस्टम घड़ी UTC का प्रयोग करता है" #: ../textw/upgrade_bootloader_text.py:53 #: ../textw/upgrade_bootloader_text.py:60 msgid "Update boot loader configuration" msgstr "बूट लोडर विन्यास का अद्यतन करें" #: ../textw/upgrade_bootloader_text.py:64 msgid "Skip boot loader updating" msgstr "बूट लोडर अद्यतन छोड़ें" #: ../textw/upgrade_bootloader_text.py:66 msgid "Create new boot loader configuration" msgstr "नया बूट लोडर विन्यास बनाएँ" #: ../textw/upgrade_text.py:91 #, python-format msgid "" "The 2.4 kernel needs significantly more swap than older kernels, as much as " "twice as much swap space as RAM on the system. You currently have %dMB of " "swap configured, but you may create additional swap space on one of your " "file systems now." msgstr "" "2.4 कर्नल को पुराने कर्नलों से अधिक स्वैप स्थान की आवश्यकता होती है, जो सिस्टम के RAM से " "दुगुने हैं. आपके पास वर्तमान में %dMB के स्वैप विन्यस्त है, परंतु अब आप, अपने फाइल सिस्टमों में से " "एक पर अतिरिक्त स्वैप स्थान बनाएँ." #: ../textw/upgrade_text.py:109 msgid "Free Space" msgstr "मुक्त स्थान" #: ../textw/upgrade_text.py:124 msgid "RAM detected (MB):" msgstr "RAM खोजी गई(MB):" #: ../textw/upgrade_text.py:127 msgid "Suggested size (MB):" msgstr "सुझाया गया आकार (MB):" #: ../textw/upgrade_text.py:130 msgid "Swap file size (MB):" msgstr "स्वैप फाइल आकार (MB):" #: ../textw/upgrade_text.py:138 msgid "Add Swap" msgstr "स्वैप जोड़ें" #: ../textw/upgrade_text.py:163 msgid "The value you entered is not a valid number." msgstr "आपने जो मूल्य दिया वह मान्य संख्या नहीं है." #: ../textw/upgrade_text.py:196 msgid "Reinstall System" msgstr "सिस्टम पुनःअधिष्ठापित करें" #: ../textw/upgrade_text.py:205 msgid "System to Upgrade" msgstr "सिस्टम उन्नयन किया जाना है" #: ../textw/upgrade_text.py:206 msgid "" "One or more existing Linux installations have been found on your system.\n" "\n" "Please choose one to upgrade, or select 'Reinstall System' to freshly " "install your system." msgstr "" "आपके सिस्टम पर एक या अधिक उपस्थित अधिष्ठापन पाए गए हैं.\n" "\n" "कृपया उन्नयन के लिए एक चुनें या 'सिस्टम पुनःअधिष्ठापित करें ' चुनकर अपने सिस्टम का नवीन " "अधिष्ठापन करें." #: ../textw/userauth_text.py:27 msgid "Root Password" msgstr "रूट शब्दकूट" #: ../textw/userauth_text.py:29 msgid "" "Pick a root password. You must type it twice to ensure you know what it is " "and didn't make a mistake in typing. Remember that the root password is a " "critical part of system security!" msgstr "" "एक रूट शब्दकूट चुनें. आप इसे अवश्य दो बार मुद्रित करें यह निश्चित करने के लिए कि उसके बारे में " "आप जानते हैं और मुद्रण करने में कोई गल्ती नहीं थी. याद रखें कि रूट शब्दकूट सिस्टम सुरक्षा का " "एक गंभीरतम भाग हैं!" #: ../textw/userauth_text.py:60 msgid "The root password must be at least 6 characters long." msgstr "रुट शब्दकूट कम से कम 6 संप्रतीक का अवश्य होना चाहिए." #: ../textw/welcome_text.py:23 #, python-format msgid "" "Welcome to %s!\n" "\n" msgstr "" "%s में स्वागत है!\n" "\n" #: ../textw/zfcp_text.py:43 msgid "FCP Device" msgstr "FCP युक्ति" #: ../textw/zfcp_text.py:101 msgid "Device #" msgstr "युक्ति #" #: ../textw/zfcp_text.py:107 msgid "Add" msgstr "जोड़ें" #: ../textw/zfcp_text.py:109 msgid "Remove" msgstr "हटाएं" #: ../textw/zipl_text.py:26 msgid "" "The z/IPL Boot Loader will be installed on your system after installation is " "complete. You can now enter any additional kernel and chandev parameters " "which your machine or your setup may require." msgstr "" "अधिष्ठापन पूरा होने के बाद z/IPL बूट लोडर आपके सिस्टम पर अधिष्ठापित हो जाएगा. अब आप " "कोई अतिरिक्त कर्नल और chandev पैरामीटरों को दाखिल करें जिसको आपकी मशीन या आपकी " "व्यवस्था की आवश्यकता हो सकती हैं." #: ../textw/zipl_text.py:58 msgid "z/IPL Configuration" msgstr "z/IPL विन्यास" #: ../textw/zipl_text.py:66 ../textw/zipl_text.py:70 msgid "Chandev line " msgstr "Chandev लाइन" #: ../installclasses/custom.py:11 msgid "_Custom" msgstr "पसंदीदा (_C)" #: ../installclasses/custom.py:13 ../installclasses/fedora.py:13 msgid "" "Select this installation type to gain complete control over the installation " "process, including software package selection and partitioning." msgstr "" "सॉफ्टवेयर संकुल चयन और विभाजन के साथ ही अधिष्ठापन प्रक्रम के ऊपर पूर्ण नियंत्रण पाने के लिए " "यह अधिष्ठापन प्रकार चुनें." #: ../installclasses/fedora.py:11 msgid "_Fedora" msgstr "_Fedora" #: ../installclasses/fedora.py:20 msgid "Office and Productivity" msgstr "ऑफिस एवं उत्पादकता" #: ../installclasses/fedora.py:21 msgid "Software Development" msgstr "सॉफ्टवेयर विकास" #: ../installclasses/fedora.py:22 msgid "Web server" msgstr "वेब सर्वर" #: ../installclasses/personal_desktop.py:11 msgid "_Personal Desktop" msgstr "निजी डेस्कटाप (_P)" #: ../installclasses/personal_desktop.py:13 msgid "" "Perfect for personal computers or laptops, select this installation type to " "install a graphical desktop environment and create a system ideal for home " "or desktop use." msgstr "" "निजी कंप्यूटरों और लेपटापों के लिए आदर्श, एक आलेखीय डेस्कटाप वातावरण को अधिष्ठापन करने के " "लिए इस अधिष्ठापन प्रकार चुनें और सिस्टम को होम या डेस्कटाप उपयोग के लिए आदर्श बनाएँ." #: ../installclasses/personal_desktop.py:18 #: ../installclasses/rhel_desktop.py:16 msgid "" "\tDesktop shell (GNOME)\n" "\tOffice suite (OpenOffice.org)\n" "\tWeb browser \n" "\tEmail (Evolution)\n" "\tInstant messaging\n" "\tSound and video applications\n" "\tGames\n" msgstr "" "\tडेस्कटाप शैल (GNOME)\n" "\tआफिस सर्वाग (ओपनओफिस.ओर्ग)\n" "\tवेब ब्राउजर (मोज़िला) \n" "\tईडाक (एवोल्यूशन)\n" "\tतुरंत संदेशा\n" "\tध्वनि और वीडियो अनुप्रयोग\n" "\tखेल\n" #: ../installclasses/rhel_as.py:9 ../installclasses/rhel_as.py:11 msgid "Red Hat Enterprise Linux AS" msgstr "Red Hat Enterprise Linux AS" #: ../installclasses/rhel_as.py:16 ../installclasses/rhel_es.py:16 msgid "" "\tDesktop shell (GNOME)\n" "\tAdministration Tools\n" "\tServer Configuration Tools\n" "\tWeb Server\n" "\tWindows File Server (SMB)\n" msgstr "" "\tडेस्कटाप शैल (GNOME)\n" "\tप्रशासनिक उपकरण\n" "\tसर्वर विन्यास उपकरण\n" "\tवेब सर्वर\n" "\tविंडोज फाइल सर्वर (SMB)\n" #: ../installclasses/rhel_desktop.py:9 ../installclasses/rhel_desktop.py:11 msgid "Red Hat Enterprise Linux Desktop" msgstr "Red Hat Enterprise Linux Desktop" #: ../installclasses/rhel_es.py:9 ../installclasses/rhel_es.py:11 msgid "Red Hat Enterprise Linux ES" msgstr "Red Hat Enterprise Linux ES" #: ../installclasses/rhel_ws.py:9 ../installclasses/rhel_ws.py:11 msgid "Red Hat Enterprise Linux WS" msgstr "Red Hat Enterprise Linux WS" #: ../installclasses/rhel_ws.py:16 ../installclasses/workstation.py:14 msgid "" "\tDesktop shell (GNOME)\n" "\tOffice suite (OpenOffice.org)\n" "\tWeb browser \n" "\tEmail (Evolution)\n" "\tInstant messaging\n" "\tSound and video applications\n" "\tGames\n" "\tSoftware Development Tools\n" "\tAdministration Tools\n" msgstr "" "\tडेस्कटाप शैल (GNOME)\n" "\tआफिस सर्वाग (ओपनओफिस.ओर्ग)\n" "\tवेब ब्राउजर (मोज़िला) \n" "\tईडाक (एवोल्यूशन)\n" "\tतुरंत संदेशा\n" "\tध्वनि और वीडियो अनुप्रयोग\n" "\tखेल\n" "\tसाफ्टवेयर विकास उपकरण\n" "\tप्रशासन उपकरण\n" #: ../installclasses/server.py:11 msgid "_Server" msgstr "सर्वर (_S)" #: ../installclasses/server.py:13 msgid "" "Select this installation type if you would like to set up file sharing, " "print sharing, and Web services. Additional services can also be enabled, " "and you can choose whether or not to install a graphical environment." msgstr "" "यदि आप फाइल हिस्सेदारी, मुद्रण हिस्सेदारी और वेब सेवाओं को व्यवस्थित करना चाहते हैं तो यह " "अधिष्ठापन प्रकार चुनें . अतिरिक्त सेवाएँ भी समर्थ हो सकती हैं, और आप यह चुन सकते हैं कि " "आलेखीय वातावरण का अधिष्ठापन करना है या नहीं ." #: ../installclasses/workstation.py:8 msgid "_Workstation" msgstr "_Workstation" #: ../installclasses/workstation.py:10 msgid "" "This option installs a graphical desktop environment with tools for software " "development and system administration. " msgstr "" "यह विकल्प सॉफ्टवेयर विकास और सिस्टम प्रशासन के लिए उपकरणों के साथ एक आलेखीय डेस्कटाप " "वातावरण अधिष्ठापित करता है." #: ../loader2/cdinstall.c:88 ../loader2/cdinstall.c:109 #: ../loader2/mediacheck.c:346 msgid "Media Check" msgstr "माध्यम जांच" #: ../loader2/cdinstall.c:88 ../loader2/cdinstall.c:91 #: ../loader2/cdinstall.c:109 ../loader2/cdinstall.c:117 #: ../loader2/method.c:419 msgid "Test" msgstr "जांचें" #: ../loader2/cdinstall.c:88 ../loader2/cdinstall.c:92 msgid "Eject CD" msgstr "CD बाहर निकालें" #: ../loader2/cdinstall.c:89 #, c-format msgid "" "Choose \"%s\" to test the CD currently in the drive, or \"%s\" to eject the " "CD and insert another for testing." msgstr "" "चालन में वर्तमान में CD जाँच के लिए \"%s\" चुनें या \"%s\"CD निकालने के लिए और जाँच करने के " "लिए अन्य डालें." #: ../loader2/cdinstall.c:110 #, c-format msgid "" "If you would like to test additional media, insert the next CD and press \"%s" "\". Testing each CD is not strictly required, however it is highly " "recommended. Minimally, the CDs should be tested prior to using them for " "the first time. After they have been successfully tested, it is not required " "to retest each CD prior to using it again." msgstr "" "अगर आप अतिरिक्त मीडिया जांच करना चाहते हैं, अगला CD डालें और \"%s\" दबायें. हर CD को " "जांचना कड़ाई से जरूरी है, हालांकि यह काफी अनुशंसित है. न्यूनतम रूप से, CDs को उन्हें प्रयोग " "करने से पहले पहली बार जांचा जाना चाहिये. उन्हें सफलतापूर्वक जांचे जाना के बाद, हर CD को " "इसे पहले प्रयोग करने के लिये फिर जांचना जरूरी है." #: ../loader2/cdinstall.c:133 ../loader2/cdinstall.c:378 #, c-format msgid "" "The %s CD was not found in any of your CDROM drives. Please insert the %s CD " "and press %s to retry." msgstr "" "आपके कोई भी CDROM चालन में %s CD नहीं मिला था. कृपया %s CD डालें और पुनःप्रयास के लिए %" "s दबाएँ." #: ../loader2/cdinstall.c:256 msgid "CD Found" msgstr "CD मिला" #: ../loader2/cdinstall.c:258 #, c-format msgid "" "To begin testing the CD media before installation press %s.\n" "\n" "Choose %s to skip the media test and start the installation." msgstr "" "अधिष्ठापन से पहले CD माध्यम की जाँच प्रारंभ करने के लिए %s दबाएँ.\n" "\n" "माध्यम जाँच को छोड़ने के लिए %s चुनें और अधिष्ठापन प्रारंभ करें." #: ../loader2/cdinstall.c:373 #, c-format msgid "" "No %s CD was found which matches your boot media. Please insert the %s CD " "and press %s to retry." msgstr "" "कोई भी %s CD नहीं मिला जो आपके बूट माध्यम से मिलान करता है. कृपया %s CD डालें और " "पुनःप्रयास के लिए %s दबाएँ." #: ../loader2/cdinstall.c:385 msgid "CD Not Found" msgstr "CD नहीं मिला" #: ../loader2/cdinstall.c:451 msgid "Cannot find kickstart file on CDROM." msgstr "CDROM पर किकस्टार्ट नहीं मिल रहा है." #: ../loader2/driverdisk.c:124 ../loader2/firewire.c:52 msgid "Loading" msgstr "लोड हो रहा है" #: ../loader2/driverdisk.c:124 msgid "Reading driver disk..." msgstr "चालन डिस्क पढ़ रहा है..." #: ../loader2/driverdisk.c:264 ../loader2/driverdisk.c:296 msgid "Driver Disk Source" msgstr "चालन डिस्क स्रोत " #: ../loader2/driverdisk.c:265 msgid "" "You have multiple devices which could serve as sources for a driver disk. " "Which would you like to use?" msgstr "" "आपके पास बहु युक्तियाँ हैं जो एक चालन डिस्क के लिए स्रोतों जैसी सेवा कर सकती हैं. आप कौन-सा " "उपयोग करना चाहेंगे?" #: ../loader2/driverdisk.c:297 msgid "" "There are multiple partitions on this device which could contain the driver " "disk image. Which would you like to use?" msgstr "" "इस उपकरण पर कई विभाजन हैं, जो चालन डिस्क विंब को रख सकती हैं. आप कौन-सा उपयोग " "करना चाहते हैं?" #: ../loader2/driverdisk.c:335 msgid "Failed to mount partition." msgstr "विभाजन डिस्क आरोहण में असफल" #: ../loader2/driverdisk.c:343 msgid "Select driver disk image" msgstr "चालन डिस्क विंब चुनें" #: ../loader2/driverdisk.c:344 msgid "Select the file which is your driver disk image." msgstr "उस फाइल को चुनें जो आपका चालक डिस्क इमेज है." #: ../loader2/driverdisk.c:373 msgid "Failed to load driver disk from file." msgstr "फाइल से चालन डिस्क आरोहण में असफल" #: ../loader2/driverdisk.c:384 #, c-format msgid "Insert your driver disk into /dev/%s and press \"OK\" to continue." msgstr "आपकी चालन डिस्क /dev/%s में डालें और जारी रखने के लिए \"ठीक\" दबाएँ." #: ../loader2/driverdisk.c:386 msgid "Insert Driver Disk" msgstr "चालन डिस्क डालें " #: ../loader2/driverdisk.c:401 msgid "Failed to mount driver disk." msgstr "चालन डिस्क आरोहण में असफल" #: ../loader2/driverdisk.c:472 msgid "Manually choose" msgstr "दस्ती रूप से चुनें" #: ../loader2/driverdisk.c:473 msgid "Load another disk" msgstr "दूसरी डिस्क भारित करें" #: ../loader2/driverdisk.c:474 msgid "" "No devices of the appropriate type were found on this driver disk. Would " "you like to manually select the driver, continue anyway, or load another " "driver disk?" msgstr "" "इस चालन डिस्क पर उचित प्रकार की युक्तियां नहीं मिली . क्या आप दस्ती रूप से से चालन " "छाँटना चाहते हैं, फिर भी जारी रहें, या अन्य कोई चालन डिस्क भारित करें?" #: ../loader2/driverdisk.c:515 msgid "Driver disk" msgstr "चालन डिस्क" #: ../loader2/driverdisk.c:516 msgid "Do you have a driver disk?" msgstr "क्या आपके पास एक चालन डिस्क है?" #: ../loader2/driverdisk.c:526 msgid "More Driver Disks?" msgstr "अधिक चालन डिस्क?" #: ../loader2/driverdisk.c:527 msgid "Do you wish to load any more driver disks?" msgstr "क्या आप और अधिक चालन डिस्क भारित करना चाहते हैं?" #: ../loader2/driverdisk.c:579 ../loader2/driverdisk.c:617 #: ../loader2/hdinstall.c:467 ../loader2/kickstart.c:121 #: ../loader2/kickstart.c:131 ../loader2/kickstart.c:174 #: ../loader2/kickstart.c:409 ../loader2/modules.c:964 ../loader2/net.c:925 #: ../loader2/net.c:948 ../loader2/nfsinstall.c:262 #: ../loader2/urlinstall.c:450 ../loader2/urlinstall.c:459 #: ../loader2/urlinstall.c:470 msgid "Kickstart Error" msgstr "किकस्टार्ट त्रुटि " #: ../loader2/driverdisk.c:580 #, c-format msgid "Unknown driver disk kickstart source: %s" msgstr "अज्ञात चालन डिस्क किकस्टार्ट स्रोत: %s " #: ../loader2/driverdisk.c:618 #, c-format msgid "" "The following invalid argument was specified for the kickstart driver disk " "command: %s:%s" msgstr "निम्नांकित अमान्य तर्क किकस्टार्ट डिस्क कमांड के लिए निर्दिष्ट था: %s:%s" #: ../loader2/driverselect.c:60 #, c-format msgid "" "Please enter any parameters which you wish to pass to the %s module " "separated by spaces. If you don't know what parameters to supply, skip this " "screen by pressing the \"OK\" button." msgstr "" "कृपया कोई पैरामीटर दाखिल करें जो स्थानों के द्वारा पृथक %s मॉडयूल को भेजना चाहते हैं. यदि " "आप नहीं जानते हैं कि कौन-सा पैरामीटर भेजें \"ठीक\" बटन दबाकर इस स्क्रीन को छोडें ." #: ../loader2/driverselect.c:80 msgid "Enter Module Parameters" msgstr "मॉडयूल पैरामीटरों को दाखिल करें" #: ../loader2/driverselect.c:181 msgid "No drivers found" msgstr "कोई चालक नहीं मिला" #: ../loader2/driverselect.c:181 msgid "Load driver disk" msgstr "चालक डिस्क भारित करें" #: ../loader2/driverselect.c:182 msgid "" "No drivers were found to manually insert. Would you like to use a driver " "disk?" msgstr "" "दस्ती रूप से रूप से डालने के लिए कोई चालक नहीं मिले थे. क्या आप चालक डिस्क प्रयोग करना " "पसंद करेंगे?" #: ../loader2/driverselect.c:201 msgid "" "Please select the driver below which you wish to load. If it does not " "appear and you have a driver disk, press F2." msgstr "" "कृपया नीचे से चालन चुनें जो आप भारित करना चाहते हैं. यदि यह नहीं आता और आपके पास चालन " "डिस्क है, F2 दबाएँ." #: ../loader2/driverselect.c:209 msgid "Specify optional module arguments" msgstr "वैकल्पिक मॉडयूल तर्क निर्दिष्ट करें" #: ../loader2/driverselect.c:229 msgid "Select Device Driver to Load" msgstr "भारण के लिए युक्ति चालक चुनें" #: ../loader2/firewire.c:52 ../loader2/windows.c:65 #, c-format msgid "Loading %s driver..." msgstr "%s चालक लोड कर रहा है..." #: ../loader2/hdinstall.c:100 ../loader2/hdinstall.c:151 #: ../loader2/nfsinstall.c:207 ../loader2/urlinstall.c:153 #, c-format msgid "" "The %s installation tree in that directory does not seem to match your boot " "media." msgstr "ऐसा नहीं लगता है कि उस निर्देशिका में %s अधिष्ठापन वृक्ष आपके बूट माध्यम से मिलान करता है." #: ../loader2/hdinstall.c:215 msgid "" "An error occured reading the install from the ISO images. Please check your " "ISO images and try again." msgstr "" "ISO बिंवों से अधिष्ठापन पढ़ने में एक त्रुटि घटित हुआ है. कृपया अपने ISO बिंवों को जाँचें और " "पुनःप्रयास करें." #: ../loader2/hdinstall.c:328 msgid "" "You don't seem to have any hard drives on your system! Would you like to " "configure additional devices?" msgstr "" "ऐसा नहीं लगता है कि आपके सिस्टम पर कोई हार्डड्राइव हैं! क्या आप अतिरिक्त युक्तियों का " "विन्यास करना चाहते हैं?" #: ../loader2/hdinstall.c:344 #, c-format msgid "" "What partition and directory on that partition hold the CD (iso9660) images " "for %s? If you don't see the disk drive you're using listed here, press F2 " "to configure additional devices." msgstr "" "%s के लिए उस विभाजन पर कौन सा विभाजन और निर्देशिका CD (iso9660) प्रतिबिम्बों को " "रखता हैं? यदि आप यहां सूचीबद्ध डिस्क चालन नहीं देख रहे हैं, अतिरिक्त युक्तियों के विन्यास के " "लिए F2 दबाएँ." #: ../loader2/hdinstall.c:366 msgid "Directory holding images:" msgstr "बिंवों को रखने वाली निर्देशिकाः" #: ../loader2/hdinstall.c:393 msgid "Select Partition" msgstr "विभाजन चुनें" #: ../loader2/hdinstall.c:433 #, c-format msgid "Device %s does not appear to contain %s CDROM images." msgstr "लगता है कि %s उपकरण में %s CDROM विंब समाहित नहीं हैं." #: ../loader2/hdinstall.c:468 #, c-format msgid "Bad argument to HD kickstart method command %s: %s" msgstr "HD किकस्टार्ट विधि कमांड %s को बुरा तर्क: %s" #: ../loader2/hdinstall.c:537 ../loader2/hdinstall.c:593 msgid "Cannot find kickstart file on hard drive." msgstr "हार्ड ड्राइव पर किकस्टार्ट फाइल मिल नहीं सका." #: ../loader2/hdinstall.c:580 #, c-format msgid "Cannot find hard drive for BIOS disk %s" msgstr "BIOS डिस्क %s के लिए हार्ड ड्राइव नहीं पा सकता है" #: ../loader2/kbd.c:126 msgid "Keyboard Type" msgstr "कुंजीपटल प्रकार " #: ../loader2/kbd.c:127 msgid "What type of keyboard do you have?" msgstr "आपके पास कौनसा प्रकार का कुंजीपटल है?" #: ../loader2/kickstart.c:122 #, c-format msgid "Error opening kickstart file %s: %s" msgstr "%s किकस्टार्ट फाइल खोलने में त्रुटि: %s" #: ../loader2/kickstart.c:132 #, c-format msgid "Error reading contents of kickstart file %s: %s" msgstr "%s किकस्टार्ट फाइल की अंतर्वस्तु पढ़ने में त्रुटि: %s" #: ../loader2/kickstart.c:175 #, c-format msgid "Error in %s on line %d of kickstart file %s." msgstr "%s किकस्टार्ट फाइल की %d रेखा पर %s त्रुटि." #: ../loader2/kickstart.c:274 msgid "Cannot find ks.cfg on boot floppy." msgstr "बूट फ्लापी पर ks.cfg खोज नहीं सका." #: ../loader2/kickstart.c:410 #, c-format msgid "Bad argument to shutdown kickstart method command %s: %s" msgstr "किकस्टार्ट विधि कमांड %s को बंद करने के लिए गलत तर्क: %s" #: ../loader2/lang.c:51 #, c-format msgid "Welcome to %s - Rescue Mode" msgstr "%s में स्वागत है - बचाव मोड" #: ../loader2/lang.c:52 ../loader2/loader.c:151 msgid " / between elements | selects | next screen " msgstr " / तत्वों के बीच | <स्थान> चुनें | आगे स्क्रीन" #: ../loader2/lang.c:361 msgid "Choose a Language" msgstr "एक भाषा छाँटें" #: ../loader2/loader.c:109 msgid "Local CDROM" msgstr "स्थानीय CDROM" #: ../loader2/loader.c:111 msgid "Hard drive" msgstr "हार्ड ड्राइव" #: ../loader2/loader.c:112 msgid "NFS image" msgstr "NFS बिंव" #: ../loader2/loader.c:324 msgid "Update Disk Source" msgstr "डिस्क स्रोत का अद्यतन करें" #: ../loader2/loader.c:325 msgid "" "You have multiple devices which could serve as sources for an update disk. " "Which would you like to use?" msgstr "" "आपके पास बहु युक्तियाँ हैं जो एक अद्यतन डिस्क के लिए स्रोतों जैसी सेवा करेगी. आप कौन-सी " "उपयोग करना पसंद करेंगे?" #: ../loader2/loader.c:340 #, c-format msgid "Insert your updates disk into /dev/%s and press \"OK\" to continue." msgstr "आपकी अद्यतन डिस्क को /dev/%s में डालें और जारी रखने के लिए \"ठीक\" दबाएं." #: ../loader2/loader.c:342 msgid "Updates Disk" msgstr "डिस्क का अद्यतन करता है" #: ../loader2/loader.c:354 msgid "Failed to mount updates disk" msgstr "अद्यतन डिस्क आरोहण में असफल" #: ../loader2/loader.c:357 msgid "Updates" msgstr "अद्यतन" #: ../loader2/loader.c:357 msgid "Reading anaconda updates..." msgstr "अनाकोंडा अद्यतनों को पढ़ रहा है..." #: ../loader2/loader.c:397 msgid "" "No hard drives have been found. You probably need to manually choose device " "drivers for the installation to succeed. Would you like to select drivers " "now?" msgstr "" "कोई भी हार्ड ड्राइव नहीं मिला था. अधिष्ठापन की सफलता के लिए, आपको प्रायः दस्ती रूप से " "रूप से युक्ति चालक चुनने की आवश्यकता हैं.क्या अब आप चालकों को चुनना चाहते हैं?" #: ../loader2/loader.c:757 #, c-format msgid "You do not have enough RAM to install %s on this machine." msgstr "इस मशीन पर %s अधिष्ठापित करने के लिए पर्याप्त RAM नहीं है." #: ../loader2/loader.c:918 msgid "Rescue Method" msgstr "बचाव विधि" #: ../loader2/loader.c:919 msgid "Installation Method" msgstr "अधिष्ठापन विधि" #: ../loader2/loader.c:921 msgid "What type of media contains the rescue image?" msgstr "किस प्रकार के माध्यम में सुरक्षा बिंव समाहित है?" #: ../loader2/loader.c:923 msgid "What type of media contains the packages to be installed?" msgstr "किस प्रकार के माध्यम में अधिष्ठापन के लिए संकुल समाहित है? " #: ../loader2/loader.c:947 msgid "No driver found" msgstr "कोई चालक नहीं मिला " #: ../loader2/loader.c:947 msgid "Select driver" msgstr "चालक चुनें" #: ../loader2/loader.c:948 msgid "Use a driver disk" msgstr "एक चालक डिस्क का प्रयोग करें" #: ../loader2/loader.c:949 msgid "" "Unable to find any devices of the type needed for this installation type. " "Would you like to manually select your driver or use a driver disk?" msgstr "" "इस अधिष्ठापन प्रकार के लिए आवश्यक कोई युक्तियाँ प्रकार पाने में असमर्थ. क्या आप चालक को " "दस्ती रूप से चुनना चाहते हैं या एक चालक डिस्क का उपयोग करना चाहते हैं?" #: ../loader2/loader.c:1110 msgid "The following devices have been found on your system." msgstr "निम्नांकित युक्तियाँ आपके सिस्टम पर मिली हैं." #: ../loader2/loader.c:1112 msgid "" "No device drivers have been loaded for your system. Would you like to load " "any now?" msgstr "" "कोई भी युक्ति चालक आपके सिस्टम पर भारित नहीं हुआ है. क्या अब आप किसी का भारण करना " "पसंद करेंगे?" #: ../loader2/loader.c:1116 msgid "Devices" msgstr "युक्तियां" #: ../loader2/loader.c:1117 msgid "Done" msgstr "पूर्ण" #: ../loader2/loader.c:1118 msgid "Add Device" msgstr "युक्ति जोड़ें" #: ../loader2/loader.c:1258 #, c-format msgid "loader has already been run. Starting shell.\n" msgstr "भारक पहले चलाया जा चुका है. शैल प्रारंभ कर रहा है.\n" #: ../loader2/loader.c:1622 #, c-format msgid "Running anaconda, the %s rescue mode - please wait...\n" msgstr "अनाकोंडा चला रहा है, %s बचाव मोड - कृपया प्रतीक्षा करें...\n" #: ../loader2/loader.c:1624 #, c-format msgid "Running anaconda, the %s system installer - please wait...\n" msgstr "अनाकोंडा चला रहा है, %s सिस्टम अधिष्ठापक - कृपया प्रतीक्षा करें...\n" #: ../loader2/mediacheck.c:330 msgid "" "Unable to read the disc checksum from the primary volume descriptor. This " "probably means the disc was created without adding the checksum." msgstr "" "प्राथमिक आयतन निरूपक से डिस्क checksum पढ़ने में असमर्थ. प्रायः इसका अर्थ हो सकता है कि " "checksum को जोड़ें बिना डिस्क बनाई गई थी." #: ../loader2/mediacheck.c:338 #, c-format msgid "Checking \"%s\"..." msgstr "\"%s\" को जांच कर रहा है...." #: ../loader2/mediacheck.c:340 #, c-format msgid "Checking media now..." msgstr "अब माध्यम की जांच की जा रही है......" #: ../loader2/mediacheck.c:387 #, c-format msgid "Unable to find install image %s" msgstr "%s अधिष्ठापन बिंव ढ़ूढ़नें में असमर्थ" #: ../loader2/mediacheck.c:397 ../loader2/mediacheck.c:414 msgid "FAILED" msgstr "विफल" #: ../loader2/mediacheck.c:398 msgid "" "The image which was just tested has errors. This could be due to a corrupt " "download or a bad disc. If applicable, please clean the disc and try " "again. If this test continues to fail you should not continue the install." msgstr "" "अभी जाँचे गए बिंव में त्रुटि हैं. यह भ्रष्ट भारित या एक बुरी डिस्क के कारण हो सकता है. यदि " "लागू हो, कृपया डिस्क साफ करें और पुनः प्रयास करें. यदि यह जाँच लगातार असफल है, आप " "अधिष्ठापन जारी न रखें." #: ../loader2/mediacheck.c:408 msgid "PASSED" msgstr "सफल" #: ../loader2/mediacheck.c:409 msgid "It is OK to install from this media." msgstr "इस मीडिया से अधिष्ठापित करना ठीक है." #: ../loader2/mediacheck.c:415 msgid "No checksum information available, unable to verify media." msgstr "कोई checksum जानकारी उपलब्ध नहीं, माध्यम जाँचने में असमर्थ." #: ../loader2/mediacheck.c:420 msgid "Media Check Result" msgstr "माध्यम जांच परिणाम" #: ../loader2/mediacheck.c:424 #, c-format msgid "" "%s for the image:\n" "\n" " %s" msgstr "" "चित्र के लिये %s:\n" "\n" " %s" #: ../loader2/mediacheck.c:428 #, c-format msgid "" "The media check %s\n" "\n" "%s" msgstr "" "मीडिया जांच %s\n" "\n" "%s" #: ../loader2/method.c:154 ../loader2/method.c:373 ../loader2/method.c:458 #, c-format msgid "Failed to read directory %s: %s" msgstr "%s निर्देशिका पढ़ने में असफल: %s" #: ../loader2/method.c:416 #, c-format msgid "" "Would you like to perform a checksum test of the ISO image:\n" "\n" " %s?" msgstr "" "क्या आप इस ISO बिंव की जाँचयोग परीक्षा करना पसंद करेंगेः :\n" "\n" " %s?" #: ../loader2/method.c:419 msgid "Checksum Test" msgstr "Checksum परीक्षा" #: ../loader2/modules.c:965 #, c-format msgid "Bad argument to device kickstart method command %s: %s" msgstr "%s युक्ति किकस्टार्ट प्रक्रिया कमांड को बुरा तर्क: %s" #: ../loader2/net.c:50 #, c-format msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your %s server\n" " o the directory on that server containing\n" " %s for your architecture\n" msgstr "" "कृपया निम्नांकित जानकारी दाखिल करें:\n" "\n" " o आपके %s सर्वर का नाम या IP क्रमांक\n" " o उस सर्वर का निर्देशिका जिसमें आपकी\n" " आर्किटेक्चर के लिए %s समाहित है \n" #: ../loader2/net.c:240 #, c-format msgid "" "%s is a wireless network adapter. Please provide the ESSID and encryption " "key needed to access your wireless network. If no key is needed, leave this " "field blank and the install will continue." msgstr "" "%s एक वायरलेस नेटवर्क अनुकूलक है. कृपया अपने वायरलेस नेटवर्क से अभिगम के लिए ESSID और " "गोपन कुंजी उपलब्ध कराएं. अगर कुंजी की जरूरत नहीं है, इस फील्ड को खाली छोड़ें और अधिष्ठापन " "को जारी रहने दें." #: ../loader2/net.c:250 msgid "Wireless Settings" msgstr "बेतार जमावट" #: ../loader2/net.c:279 msgid "Nameserver IP" msgstr "नामसर्वर IP" #: ../loader2/net.c:283 msgid "Nameserver" msgstr "नामसर्वर" #: ../loader2/net.c:284 msgid "" "Your dynamic IP request returned IP configuration information, but it did " "not include a DNS nameserver. If you know what your nameserver is, please " "enter it now. If you don't have this information, you can leave this field " "blank and the install will continue." msgstr "" "आपकी गतिक IP प्रार्थना ने IP विन्यास सूचना को वापस कर दिया है, परंतु इसमें DNS नामसर्वर " "शामिल नहीं हैं. यदि आप जानते हैं कि आपका नामसर्वर कौन-सा है , इसे अब दाखिल करें. यदि " "आपके पास यह जानकारी नहीं हैं, आप इस क्षेत्र को खाली छोड़ सकते हैं और अधिष्ठापन जारी करेगा." #: ../loader2/net.c:294 msgid "Invalid IP Information" msgstr "अमान्य IP जानकारी " #: ../loader2/net.c:295 msgid "You entered an invalid IP address." msgstr "आपने एक अमान्य IP पता दिया है." #: ../loader2/net.c:364 ../loader2/net.c:622 msgid "Dynamic IP" msgstr "गतिशील IP" #: ../loader2/net.c:365 ../loader2/net.c:623 #, c-format msgid "Sending request for IP information for %s..." msgstr "%s के लिए IP जानकारी के लिए निवेदन भेज रहा है..." #: ../loader2/net.c:506 msgid "" "Please enter the IP configuration for this machine. Each item should be " "entered as an IP address in dotted-decimal notation (for example, 1.2.3.4)." msgstr "" "कृपया इस मशीन के लिए IP विन्यास दाखिल करें. प्रत्येक वस्तु, बिन्दुकृत दशमलव पद्धति में" "(उदाहरण के लिए , 1.2.3.4) एक IP पते की तरह दाखिल की जाएँ." #: ../loader2/net.c:512 msgid "IP address:" msgstr "IP पताः" #: ../loader2/net.c:515 msgid "Netmask:" msgstr "नेटमास्कः" #: ../loader2/net.c:518 msgid "Default gateway (IP):" msgstr "मूलभूत गेटवे (IP):" #: ../loader2/net.c:521 msgid "Primary nameserver:" msgstr "प्राथमिक नामसर्वरः" #: ../loader2/net.c:548 msgid "Use dynamic IP configuration (BOOTP/DHCP)" msgstr "गतिक IP विन्यास(BOOTP/DHCP) का प्रयोग करें" #: ../loader2/net.c:576 msgid "Configure TCP/IP" msgstr "TCP/IP का विन्यास करें" #: ../loader2/net.c:613 msgid "Missing Information" msgstr "जानकारी गुम गई" #: ../loader2/net.c:614 msgid "You must enter both a valid IP address and a netmask." msgstr "आप एक उचित IP पता और एक नेटमॉस्क दोनों अवश्य दाखिल करें." #: ../loader2/net.c:838 msgid "Determining host name and domain..." msgstr "मेजबाननाम और क्षेत्र की गणना कर रहा है..." #: ../loader2/net.c:926 #, c-format msgid "Bad argument to kickstart network command %s: %s" msgstr "%s किकस्टार्ट संजाल कमांड को बुरा तर्क: %s" #: ../loader2/net.c:949 #, c-format msgid "Bad bootproto %s specified in network command" msgstr "संजाल कमांड में बेकार %s बूटसंदेशाचार निर्दिष्ट है" #: ../loader2/net.c:1105 msgid "Networking Device" msgstr "संजाल युक्ति" #: ../loader2/net.c:1106 msgid "" "You have multiple network devices on this system. Which would you like to " "install through?" msgstr "इस सिस्टम पर आपके पास बहु संजाल युक्तियाँ हैं. आप किसे अधिष्ठापन करना पसंद करेंगे?" #: ../loader2/nfsinstall.c:44 msgid "NFS server name:" msgstr "NFS सर्वर नामः" #: ../loader2/nfsinstall.c:47 ../loader2/urls.c:297 #, c-format msgid "%s directory:" msgstr "%s निर्देशिका:" #: ../loader2/nfsinstall.c:52 msgid "NFS" msgstr "NFS" #: ../loader2/nfsinstall.c:53 msgid "NFS Setup" msgstr "NFS व्यवस्था" #: ../loader2/nfsinstall.c:128 msgid "Hostname specified with no DNS configured" msgstr "बिना DNS विन्यस्त किये मेजबाननाम निर्दिष्ट" #: ../loader2/nfsinstall.c:211 #, c-format msgid "That directory does not seem to contain a %s installation tree." msgstr "उस निर्देशिका में %s अधिष्ठापन वृक्ष समाहित दिखाई नहीं देता है." #: ../loader2/nfsinstall.c:224 msgid "That directory could not be mounted from the server." msgstr "उस निर्देशिका का आरोहण सर्वर से नहीं हो सका." #: ../loader2/nfsinstall.c:263 #, c-format msgid "Bad argument to NFS kickstart method command %s: %s" msgstr "%s NFS किकस्टार्ट विधि कमांड को बुरा तर्क: %s" #: ../loader2/telnetd.c:80 ../loader2/telnetd.c:122 msgid "Telnet" msgstr "टेलनेट" #: ../loader2/telnetd.c:80 msgid "Waiting for telnet connection..." msgstr "टेलनेट संबंधन के लिए प्रतीक्षा कर रहा है..." #: ../loader2/telnetd.c:122 msgid "Running anaconda via telnet..." msgstr "अनाकोंडा द्वारा टेलनेट चला रहा है...." #: ../loader2/urlinstall.c:73 #, c-format msgid "Unable to retrieve %s://%s/%s/%s." msgstr "%s पुनःप्राप्ति में असमर्थ ://%s/%s/%s." #: ../loader2/urlinstall.c:145 msgid "Unable to retrieve the install image." msgstr "अधिष्ठापन बिंव पुनःप्राप्ति में असमर्थ." #: ../loader2/urlinstall.c:284 msgid "Media Detected" msgstr "माध्यम खोजा गया" #: ../loader2/urlinstall.c:285 msgid "Local installation media detected..." msgstr "स्थानीय अधिष्ठापन माध्यम खोजा गया..." #: ../loader2/urlinstall.c:451 #, c-format msgid "Bad argument to Url kickstart method command %s: %s" msgstr " %s Url किकस्टार्ट विधि कमांड को बुरा तर्क: %s" #: ../loader2/urlinstall.c:460 msgid "Must supply a --url argument to Url kickstart method." msgstr "Url किकस्टार्ट विधि को एक --url तर्क अवश्य दें." #: ../loader2/urlinstall.c:471 #, c-format msgid "Unknown Url method %s" msgstr "अज्ञात Url विधि %s" #: ../loader2/urls.c:182 #, c-format msgid "Failed to log into %s: %s" msgstr "%s में प्रवेश करने में असफल: %s" #: ../loader2/urls.c:192 ../loader2/urls.c:201 #, c-format msgid "Failed to retrieve %s: %s" msgstr "%s पुनःप्राप्ति में असफल: %s" #: ../loader2/urls.c:208 msgid "Retrieving" msgstr "पुनःप्राप्त कर रहा है" #: ../loader2/urls.c:270 msgid "FTP" msgstr "FTP" #: ../loader2/urls.c:275 msgid "Web" msgstr "वेब" #: ../loader2/urls.c:292 msgid "FTP site name:" msgstr "FTP साइट नामः" #: ../loader2/urls.c:293 msgid "Web site name:" msgstr "वेब साइट नामः " #: ../loader2/urls.c:312 msgid "Use non-anonymous ftp" msgstr "गैर अनाम ftp का प्रयोग करें" #: ../loader2/urls.c:321 msgid "FTP Setup" msgstr "FTP व्यवस्था " #: ../loader2/urls.c:322 msgid "HTTP Setup" msgstr "HTTP व्यवस्था " #: ../loader2/urls.c:332 msgid "You must enter a server name." msgstr "आप एक सर्वर नाम अवश्य दें." #: ../loader2/urls.c:337 msgid "You must enter a directory." msgstr "आप एक निर्देशिका अवश्य दें." #: ../loader2/urls.c:342 msgid "Unknown Host" msgstr "अज्ञात मेजबान" #: ../loader2/urls.c:343 #, c-format msgid "%s is not a valid hostname." msgstr "%s एक उचित मेजबाननाम नहीं है. " #: ../loader2/urls.c:416 msgid "" "If you are using non anonymous ftp, enter the account name and password you " "wish to use below." msgstr "" "यदि आप नामक ftp का प्रयोग कर रहे हैं, खाता नाम और शब्दकूट दाखिल करें जो आप नीचे प्रयोग " "करना चाहते हैं." #: ../loader2/urls.c:421 msgid "" "If you are using a HTTP proxy server enter the name of the HTTP proxy server " "to use." msgstr "" "यदि आप एक HTTP प्राक्सी सर्वर प्रयोग कर रहे हैं तो प्रयोग के लिए HTTP प्राक्सी सर्वर का " "नाम दाखिल करें." #: ../loader2/urls.c:443 msgid "Account name:" msgstr "खाता नामः" #: ../loader2/urls.c:468 msgid "Further FTP Setup" msgstr "अगली FTP व्यवस्था " #: ../loader2/urls.c:471 msgid "Further HTTP Setup" msgstr "अगली HTTP व्यवस्था " #: ../loader2/windows.c:64 msgid "Loading SCSI driver" msgstr "SCSI चालन भारित कर रहा है" #: tmp/anaconda.glade.h:1 msgid "Reboo_t" msgstr "रीबूट करें (_t)" #: tmp/anaconda.glade.h:2 msgid "_Debug" msgstr "दोषमार्जन करें (_D)" #: tmp/anaconda.glade.h:3 msgid "_Next" msgstr "आगे (_N)" #: tmp/anaconda.glade.h:4 msgid "_Release Notes" msgstr "रिलीज नोट्स (_R)" #: tmp/autopart.glade.h:2 msgid "Re_view and modify partitioning layout" msgstr "विभाजनकारी लेआउट की समीक्षा व रूपांतरण करें (_v)" #: tmp/autopart.glade.h:3 msgid "_Select the drive(s) to use for this installation." msgstr "इस अधिष्ठापन का प्रयोग के लिए चालन का चयन करें (_S)" #: tmp/exn.glade.h:1 msgid "Exception Info" msgstr "अपवाद सूचना" #: tmp/exn.glade.h:2 msgid "_Exception details" msgstr "अपवाद विवरण (_E)" #: tmp/iscsi-config.glade.h:1 msgid "_Port Number:" msgstr "पोर्ट संख्या (_P):" #: tmp/iscsi-config.glade.h:2 msgid "_Target IP Address:" msgstr "लक्ष्य IP पता (_T):" #: tmp/iscsi-config.glade.h:3 msgid "iSCSI Initiator _Name:" msgstr "iSCSI आरंभकर्ता नाम (_N):" #: tmp/iscsi-config.glade.h:4 msgid "iSCSI configuration" msgstr "iSCSI विन्यास" #: tmp/tasksel.glade.h:1 msgid "Customize _later" msgstr "बाद वाले को पसंदीदा करें (_l)" #: tmp/tasksel.glade.h:2 msgid "" "Further customization of the software selection can be completed now or " "after install via the software management application." msgstr "" "सॉफ्टवेयर चयन का आगे पसंदीदा करण को अब या सॉफ्टवेयर प्रबंधन अनुप्रयोग के द्वारा अधिष्ठापन " "के बाद पूरा किया जा सकता है." #: tmp/tasksel.glade.h:4 #, no-c-format msgid "" "The default installation of %s includes a set of software applicable for " "general internet usage. What additional tasks would you like your system to " "include support for?" msgstr "" "%s के मूलभूत अधिष्ठापन में सामान्य इंटरनेट प्रयोग के लिये अनुप्रयुक्त सॉफ्टवेयर समाहित करता है. " "किस अतिरिक्त कार्य के लिये आप सिस्टम में समर्थन शामिल करना चाहेंगे?" #: tmp/tasksel.glade.h:5 msgid "_Customize now" msgstr "अब पसंदीदा करें (_C)" #. generated from zone.tab msgid "Acre" msgstr "Acre" #. generated from zone.tab msgid "Alagoas, Sergipe" msgstr "एलागोस, सरजीपी" #. generated from zone.tab msgid "Alaska Time" msgstr "अलास्का समय" #. generated from zone.tab msgid "Alaska Time - Alaska panhandle" msgstr "अलास्का समय - अलास्का पेनहेंडल" #. generated from zone.tab msgid "Alaska Time - Alaska panhandle neck" msgstr "अलास्का समय - अलास्का पेनहेंडल नेक" #. generated from zone.tab msgid "Alaska Time - west Alaska" msgstr "अलास्का समय - पश्चिमी अलास्का " #. generated from zone.tab msgid "Aleutian Islands" msgstr "एल्यूशियन द्वीप" #. generated from zone.tab msgid "Amapa, E Para" msgstr "अमापा, ई पारा " #. generated from zone.tab msgid "Amundsen-Scott Station, South Pole" msgstr "एमंडसेन-स्काट स्टेशन, दक्षिण ध्रुव" #. generated from zone.tab msgid "Aqtobe (Aktobe)" msgstr "अक्टोब (अक्टोब)" #. generated from zone.tab msgid "Atlantic islands" msgstr "अटलांटिक द्वीप" #. generated from zone.tab msgid "Atlantic Time - E Labrador" msgstr "अटलांटिक समय - ई लेब्राडोर" #. generated from zone.tab msgid "Atlantic Time - New Brunswick" msgstr "अटलांटिक समय - न्यू ब्रंसविक" #. generated from zone.tab msgid "Atlantic Time - Nova Scotia (most places), W Labrador, E Quebec & PEI" msgstr "अटलांटिक समय - नोवा स्कोटिया (अधिकतम स्थान), W लाब्राडोर, E क्यूबेक और PEI" #. generated from zone.tab msgid "Atlantic Time - Nova Scotia - places that did not observe DST 1966-1971" msgstr "अटलांटिक समय - नोवा स्कोटिया - जगह जो DST 1966-1971 देखता नहीं है." #. generated from zone.tab msgid "Atyrau (Atirau, Gur'yev), Mangghystau (Mankistau)" msgstr "अटयारोह (अटिरोह, गुरयेव),मांगिसतो(मांकिसतो)" #. generated from zone.tab msgid "Azores" msgstr "अजोर्स" #. generated from zone.tab msgid "Bahia" msgstr "बाहिया" #. generated from zone.tab msgid "Bayan-Olgiy, Govi-Altai, Hovd, Uvs, Zavkhan" msgstr "बयान-ओलजी, गोवी-अल्टाई, होव्ड, यूव्स, जवखन" #. generated from zone.tab msgid "Buenos Aires (BA, CF)" msgstr "ब्यूनस आयर्स (BA, CF)" #. generated from zone.tab msgid "Canary Islands" msgstr "केनारी द्वीप" #. generated from zone.tab msgid "Casey Station, Bailey Peninsula" msgstr "केसे स्टेशन,बेलै पेनेनसूला" #. generated from zone.tab msgid "Catamarca (CT), Chubut (CH)" msgstr "केटामारका(CT), चाबुट (CH)" #. generated from zone.tab msgid "central China - Gansu, Guizhou, Sichuan, Yunnan, etc." msgstr "केन्द्रीय चीन - गांसू, ग्यूझू, सिचुआन, यूनन, आदि." #. generated from zone.tab msgid "central Crimea" msgstr "केन्द्रीय क्रीमिआ" #. generated from zone.tab msgid "Central Standard Time - Saskatchewan - midwest" msgstr "केन्द्रीय मानक समय - सचकैचवान - मध्यपश्चिमी" #. generated from zone.tab msgid "Central Standard Time - Saskatchewan - most locations" msgstr "केन्द्रीय मानक समय - सचकैचवान - अधिकतम जगह" #. generated from zone.tab msgid "Central Time" msgstr "केन्द्रीय समय" #. generated from zone.tab msgid "Central Time - Campeche, Yucatan" msgstr "केन्द्रीय समय -केमपैज़, यूकाटन" #. generated from zone.tab msgid "Central Time - central Nunavut" msgstr "केन्द्रीय समय - केंद्रीय नूनावट" #. generated from zone.tab msgid "Central Time - Coahuila, Durango, Nuevo Leon, Tamaulipas" msgstr "केन्द्रीय समय -कोहुला, दुरानगो, न्यूवो लिओन, तमाउलिपा" #. generated from zone.tab msgid "" "Central Time - Indiana - Daviess, Dubois, Knox, Martin, Perry & Pulaski " "Counties" msgstr "केंद्रीय समय - इंडियाना - डेविस, ड्यूविस, नॉक्स, मार्टिन, पेरी और पुलास्की देश" #. generated from zone.tab msgid "Central Time - Indiana - Pike County" msgstr "केंद्रीय समय - इंडियाना - पाइक काउंटी" #. generated from zone.tab msgid "Central Time - Manitoba & west Ontario" msgstr "केन्द्रीय समय - मोनीटोबा और पश्चिम ओंटारियो" #. generated from zone.tab msgid "Central Time - Michigan - Dickinson, Gogebic, Iron & Menominee Counties" msgstr "केन्द्रीय समय -मिशीगन - डिकिंसन, गोजेविक, आइरन और मेनोमेनी कॉउंटी" #. generated from zone.tab msgid "Central Time - most locations" msgstr "केन्द्रीय समय -अधिकतम जगह" #. generated from zone.tab msgid "Central Time - North Dakota - Morton County (except Mandan area)" msgstr "केन्द्रीय समय -उत्तरी डेकोटा - मोर्टन कॉउंटी (मैंडन क्षेत्र)" #. generated from zone.tab msgid "Central Time - North Dakota - Oliver County" msgstr "केन्द्रीय समय -उत्तर डेकोटा - ओलीवर काउन्टी" #. generated from zone.tab msgid "Central Time - Quintana Roo" msgstr "केन्द्रीय समय -क्विनटाना रू" #. generated from zone.tab msgid "Central Time - Rainy River & Fort Frances, Ontario" msgstr "केन्द्रीय समय - रेनी नदी और किला फ्रांसिस, ओंटारियो" #. generated from zone.tab msgid "Central Time - west Nunavut" msgstr "केन्द्रीय समय - पश्चिम नूनावट" #. generated from zone.tab msgid "Ceuta & Melilla" msgstr "स्वेटा और मेलिला" #. generated from zone.tab msgid "Chatham Islands" msgstr "चाथम द्वीप" #. generated from zone.tab msgid "Davis Station, Vestfold Hills" msgstr "डेविस स्टेशन, वेस्टफोल्ड पहाडी" #. generated from zone.tab msgid "Dornod, Sukhbaatar" msgstr "दोरनोड, सुखबातर" #. generated from zone.tab msgid "Dumont-d'Urville Base, Terre Adelie" msgstr "ड्यूमा-डि'उरविल आधार, टेरे एडीली" #. generated from zone.tab msgid "E Amazonas" msgstr "ई आमेजोनास" #. generated from zone.tab msgid "east China - Beijing, Guangdong, Shanghai, etc." msgstr "पूर्व चीन - बीजिंग, गुआंगडांग, शंघाई, आदि." #. generated from zone.tab msgid "east coast, north of Scoresbysund" msgstr "पूर्व कोस्ट, स्कोरबिसंड का उत्तर" #. generated from zone.tab msgid "east Dem. Rep. of Congo" msgstr "पूर्वी कांगो का लोकतांत्रिक गणतंत्र" #. generated from zone.tab msgid "Easter Island & Sala y Gomez" msgstr "ईस्टर द्वीप और साला ये गोमेज" #. generated from zone.tab msgid "Eastern Standard Time - Southampton Island" msgstr "पूर्वी मानक समय - साउथंपटन द्वीप" #. generated from zone.tab msgid "Eastern Time" msgstr "पूर्वी समय" #. generated from zone.tab msgid "Eastern Time - east Nunavut" msgstr "पूर्वी समय - पूर्व नूनावट" #. generated from zone.tab msgid "Eastern Time - Indiana - Crawford County" msgstr "पूर्वी समय - इंडियाना - क्रोफोर्ड काउंटी" #. generated from zone.tab msgid "Eastern Time - Indiana - most locations" msgstr "पूर्वी समय - इंडियाना - अधिकतम जगह" #. generated from zone.tab msgid "Eastern Time - Indiana - Starke County" msgstr "पूर्वी समय - इंडियाना - स्टार्क काउंटी" #. generated from zone.tab msgid "Eastern Time - Indiana - Switzerland County" msgstr "पूर्वी समय - इंडियाना - स्विज़रलेण्ड काउंटी" #. generated from zone.tab msgid "Eastern Time - Kentucky - Louisville area" msgstr "पूर्वी समय - केनटुकी -ल्यूसवेली क्षेत्र" #. generated from zone.tab msgid "Eastern Time - Kentucky - Wayne County" msgstr "पूर्वी समय - केन्टुकी - वेनी काउंटी" #. generated from zone.tab msgid "Eastern Time - Michigan - most locations" msgstr "पूर्वी समय - मिशिगन - अधिकतम जगह" #. generated from zone.tab msgid "Eastern Time - Ontario - most locations" msgstr "पूर्वी समय - ओंटारियो - अधिकतर जगह" #. generated from zone.tab msgid "Eastern Time - Ontario & Quebec - places that did not observe DST 1967-1973" msgstr "पूर्वी समय - ओंटारियो एवं क्यूबेक - जगह जो DST 1967-1973 को नहीं देखते" #. generated from zone.tab msgid "Eastern Time - Pangnirtung, Nunavut" msgstr "पूर्वी समय - पैंगनिर्टंग, नूनावट" #. generated from zone.tab msgid "Eastern Time - Quebec - most locations" msgstr "पूर्वी समय - क्यूबेक - ज्यादातर जगह " #. generated from zone.tab msgid "Eastern Time - Thunder Bay, Ontario" msgstr "पूर्वी समय - थन्डर वे, ओंटारियो " #. generated from zone.tab msgid "east & south Borneo, Celebes, Bali, Nusa Tengarra, west Timor" msgstr "पूर्व और दक्षिण बोर्नियो, सेलेबिस, बाली, नूसा, तनगर्रा, पश्चिम तिमोर" #. generated from zone.tab msgid "east Uzbekistan" msgstr "पूर्वी उजबेकिस्तान" #. generated from zone.tab msgid "Galapagos Islands" msgstr "गैलापागोस द्वीप" #. generated from zone.tab msgid "Gambier Islands" msgstr "गांबियर द्वीप" #. generated from zone.tab msgid "Gilbert Islands" msgstr "गिलबर्ट द्वीप" #. generated from zone.tab msgid "Hawaii" msgstr "हवाई" #. generated from zone.tab msgid "Heilongjiang" msgstr "हिलोंगजिंग" #. generated from zone.tab msgid "Irian Jaya & the Moluccas" msgstr "आईरियन जाया और मोलूकस" #. generated from zone.tab msgid "Jan Mayen" msgstr "जेन मायेन" #. generated from zone.tab msgid "Java & Sumatra" msgstr "जावा और सुमात्रा" #. generated from zone.tab msgid "Johnston Atoll" msgstr "जान्सटन एटाल" #. generated from zone.tab msgid "Jujuy (JY)" msgstr "जुजै (JY)" #. generated from zone.tab msgid "Kosrae" msgstr "कोसरे" #. generated from zone.tab msgid "Kwajalein" msgstr "क्वाजालिन" #. generated from zone.tab msgid "La Rioja (LR)" msgstr "ला रियोजा (LR)" #. generated from zone.tab msgid "Line Islands" msgstr "लाइन द्वीप" #. generated from zone.tab msgid "Lord Howe Island" msgstr "लार्ड होव द्वीप" #. generated from zone.tab msgid "Madeira Islands" msgstr "मेडेरा द्वीप" #. generated from zone.tab msgid "mainland" msgstr "मेनलैंड" #. generated from zone.tab msgid "Marquesas Islands" msgstr "मरक्यूस द्वीप" #. generated from zone.tab msgid "Mato Grosso" msgstr "मैटो ग्रासो" #. generated from zone.tab msgid "Mato Grosso do Sul" msgstr "मैटो ग्रोसो डो सुल" #. generated from zone.tab msgid "Mawson Station, Holme Bay" msgstr "मासन स्टेशन, हों बे" #. generated from zone.tab msgid "McMurdo Station, Ross Island" msgstr "मेकमुरडो स्टेशन, रास द्वीप" #. generated from zone.tab msgid "Mendoza (MZ)" msgstr "मेनडोजा (MZ)" #. generated from zone.tab msgid "Midway Islands" msgstr "मिडवे द्वीप" #. generated from zone.tab msgid "Moscow+00 - west Russia" msgstr "मास्को+00 - पश्चिम रूस" #. generated from zone.tab msgid "Moscow+01 - Caspian Sea" msgstr "मास्को+01 - केस्पियन समुद्र" #. generated from zone.tab msgid "Moscow-01 - Kaliningrad" msgstr "मास्को-01 - केलीनिनग्राड" #. generated from zone.tab msgid "Moscow+02 - Urals" msgstr "मास्को+02 - यूरल" #. generated from zone.tab msgid "Moscow+03 - Novosibirsk" msgstr "मास्को+03 - नोवोसिब्रिस्क" #. generated from zone.tab msgid "Moscow+03 - west Siberia" msgstr "मास्को+03 - पश्चिम साइबेरिया" #. generated from zone.tab msgid "Moscow+04 - Yenisei River" msgstr "मास्को+04 - येनीसी नदी" #. generated from zone.tab msgid "Moscow+05 - Lake Baikal" msgstr "मास्को+05 - बेकाल झील " #. generated from zone.tab msgid "Moscow+06 - Lena River" msgstr "मास्को+05 - लीना नदी" #. generated from zone.tab msgid "Moscow+07 - Amur River" msgstr "मास्को+07 - अमूर नदी" #. generated from zone.tab msgid "Moscow+07 - Sakhalin Island" msgstr "मास्को+07 - सकलेन द्वीप" #. generated from zone.tab msgid "Moscow+08 - Magadan" msgstr "मास्को+08 - मगाडन" #. generated from zone.tab msgid "Moscow+09 - Kamchatka" msgstr "मास्को+09 -कमचटका" #. generated from zone.tab msgid "Moscow+10 - Bering Sea" msgstr "मास्को+10 - बेरिंग समुद्र" #. generated from zone.tab msgid "most locations" msgstr "अधिकतम जगह" #. generated from zone.tab msgid "most locations (CB, CC, CN, ER, FM, LP, MN, NQ, RN, SA, SE, SF, SL)" msgstr "अधिकतम जगह (CB,CC,CH,CN,ER,FM,LP,LR,MN,NQ,RN,SA,SE,SF,SJ,SL,TM)" #. generated from zone.tab msgid "Mountain Standard Time - Arizona" msgstr "पर्वतीय मानक समय - एरिजोना" #. generated from zone.tab msgid "Mountain Standard Time - Dawson Creek & Fort Saint John, British Columbia" msgstr "पर्वतीय मानक समय - डासन क्रीक & सेंट जाऩ किला, ब्रिटिश कोलंबिया" #. generated from zone.tab msgid "Mountain Standard Time - Sonora" msgstr "पर्वतीय मानक समय - सोनोरा" #. generated from zone.tab msgid "Mountain Time" msgstr "पर्वतीय समय " #. generated from zone.tab msgid "Mountain Time - Alberta, east British Columbia & west Saskatchewan" msgstr "पर्वतीय समय -अलबेर्टा,पूर्व ब्रिटिश कोलंबिया & पश्चिम सचकैचवान" #. generated from zone.tab msgid "Mountain Time - central Northwest Territories" msgstr "पर्वतीय समय - केन्द्रीय उत्तरपश्चिमी प्रदेश" #. generated from zone.tab msgid "Mountain Time - Chihuahua" msgstr "पर्वतीय समय -चीहुवाहुवा" #. generated from zone.tab msgid "Mountain Time - Navajo" msgstr "पर्वतीय समय - नवाजो" #. generated from zone.tab msgid "Mountain Time - S Baja, Nayarit, Sinaloa" msgstr "पर्वतीय समय - द. बाजा,नायारित,सिनालोआ" #. generated from zone.tab msgid "Mountain Time - south Idaho & east Oregon" msgstr "पर्वतीय समय - दक्षिण इडाहो & पूर्व ओरेगॉन" #. generated from zone.tab msgid "Mountain Time - west Northwest Territories" msgstr "पर्वतीय समय - पश्चिम उत्तरपूर्व प्रदेश" #. generated from zone.tab msgid "NE Brazil (MA, PI, CE, RN, PB)" msgstr "NE ब्राज़ील (MA, PI, CE, RN, PB)" #. generated from zone.tab msgid "Newfoundland Island" msgstr "न्यूफाउंडलेण्ड द्वीप" #. generated from zone.tab msgid "New South Wales - most locations" msgstr "न्यू साउथ वेल्स - अधिकतम जगह" #. generated from zone.tab msgid "New South Wales - Yancowinna" msgstr "न्यू दक्षिण वेल्स - यानकोविन्ना" #. generated from zone.tab msgid "Northern Territory" msgstr "उत्तरी प्रदेश" #. generated from zone.tab msgid "Pacific Time" msgstr "प्रशांत समय" #. generated from zone.tab msgid "Pacific Time - north Yukon" msgstr "प्रशांत समय - उत्तर यूकोन" #. generated from zone.tab msgid "Pacific Time - south Yukon" msgstr "प्रशांत समय - दक्षिण यूकोन" #. generated from zone.tab msgid "Pacific Time - west British Columbia" msgstr "प्रशांत समय - पश्चिम ब्रिटिश कोलंबिया" #. generated from zone.tab msgid "Palmer Station, Anvers Island" msgstr "पामर स्टेशन, अनवर्स द्वीप" #. generated from zone.tab msgid "peninsular Malaysia" msgstr "प्रायद्वीपीय मलेशिया" #. generated from zone.tab msgid "Pernambuco" msgstr "परनामबुको" #. generated from zone.tab msgid "Phoenix Islands" msgstr "फीनिक्स द्वीप" #. generated from zone.tab msgid "Ponape (Pohnpei)" msgstr "पोनापे (पोहनपी)" #. generated from zone.tab msgid "Queensland - Holiday Islands" msgstr "क्वींसलैंड - होलीडे द्वीप" #. generated from zone.tab msgid "Queensland - most locations" msgstr "क्वींसलैंड - अधिकतम जगह" #. generated from zone.tab msgid "Qyzylorda (Kyzylorda, Kzyl-Orda)" msgstr "खिजीलोरडा (किजीलोरडा, किजील-ओरडा)" #. generated from zone.tab msgid "Roraima" msgstr "रोराइमा" #. generated from zone.tab msgid "Rothera Station, Adelaide Island" msgstr "रोथेरा स्टेशन, एडीलेड द्वीप" #. generated from zone.tab msgid "Ruthenia" msgstr "रूथेनिया" #. generated from zone.tab msgid "Sabah & Sarawak" msgstr "साबाह एवं सारावक" #. generated from zone.tab msgid "San Juan (SJ)" msgstr "सान जुआन (SJ)" #. generated from zone.tab msgid "Santa Cruz (SC)" msgstr "सांता क्रुज (SC)" #. generated from zone.tab msgid "Scoresbysund / Ittoqqortoormiit" msgstr "स्कोरस्बायसंड / इटोखोरटूरमिट" #. generated from zone.tab msgid "Society Islands" msgstr "सोसाइटी द्वीप" #. generated from zone.tab msgid "South Australia" msgstr "दक्षिण आस्ट्रेलिया" #. generated from zone.tab msgid "southwest Xinjiang Uyghur" msgstr "दक्षिणपश्चिम ज़िंगजांग युगहर" #. generated from zone.tab msgid "S & SE Brazil (GO, DF, MG, ES, RJ, SP, PR, SC, RS)" msgstr "द. एवं द.पू. ब्राजील (GO, DF, MG, ES, RJ, SP, PR, SC, RS)" #. generated from zone.tab msgid "Svalbard" msgstr "स्वालबर्ड" #. generated from zone.tab msgid "Syowa Station, E Ongul I" msgstr "स्योवा स्टेशन, इ ओन्गुल आई" #. generated from zone.tab msgid "Tasmania - King Island" msgstr "तस्मानिया - किंग द्वीप" #. generated from zone.tab msgid "Tasmania - most locations" msgstr "तस्मानिया - अधिकतम स्थान" #. generated from zone.tab msgid "Thule / Pituffik" msgstr "थुले / पिटुफिक" #. generated from zone.tab msgid "Tibet & most of Xinjiang Uyghur" msgstr "टीबेट और ज़िंगजांग युगहर के ज्यादातर" #. generated from zone.tab msgid "Tierra del Fuego (TF)" msgstr "टियेरा डेल फ्यूगो (TF)" #. generated from zone.tab msgid "Tocantins" msgstr "टोकानटिन्स" #. generated from zone.tab msgid "Truk (Chuuk) and Yap" msgstr "त्रुक (चूक) और याप" #. generated from zone.tab msgid "Tucuman (TM)" msgstr "टुकुमान (TM)" #. generated from zone.tab msgid "Victoria" msgstr "विक्टोरिया" #. generated from zone.tab msgid "Vostok Station, S Magnetic Pole" msgstr "वोसटोक स्टेशन, द. चुम्बकीय ध्रुव" #. generated from zone.tab msgid "Wake Island" msgstr "वेक द्वीप" #. generated from zone.tab msgid "W Amazonas" msgstr "पश्चिमी आमेजंस" #. generated from zone.tab msgid "west & central Borneo" msgstr "पश्चिम और केन्द्रीय बोर्नियो" #. generated from zone.tab msgid "west Dem. Rep. of Congo" msgstr "पश्चिमी कांगो का लोकतांत्रिक गणराज्य" #. generated from zone.tab msgid "Western Australia" msgstr "पश्चिमी ऑस्ट्रेलिया" #. generated from zone.tab msgid "West Kazakhstan" msgstr "पश्चिम कजाखस्तान" #. generated from zone.tab msgid "west Uzbekistan" msgstr "पश्चिम उजबेकिस्तान" #. generated from zone.tab msgid "W Para, Rondonia" msgstr "डब्ल्यू पैरा, रोंडोनिया" #. generated from zone.tab msgid "Zaporozh'ye, E Lugansk" msgstr "जैप्रोझाय, ई लुगांस्क" #. generated from lang-table msgid "Afrikaans" msgstr "अफ्रीकांस" #. generated from lang-table msgid "Arabic" msgstr "अरेबिक" #. generated from lang-table msgid "Bengali" msgstr "बंगाली" #. generated from lang-table msgid "Bengali(India)" msgstr "बंगाली (भारत)" #. generated from lang-table msgid "Bulgarian" msgstr "बल्गेरियाई" #. generated from lang-table msgid "Catalan" msgstr "कैटालॉन" #. generated from lang-table msgid "Chinese(Simplified)" msgstr "चीनी (सरलीकृत)" #. generated from lang-table msgid "Chinese(Traditional)" msgstr "चीनी (पारंपरिक)" #. generated from lang-table msgid "Croatian" msgstr "क्रोशियाई" #. generated from lang-table msgid "Czech" msgstr "चेक" #. generated from lang-table msgid "Danish" msgstr "डैनिश" #. generated from lang-table msgid "Dutch" msgstr "डच" #. generated from lang-table msgid "English" msgstr "इंग्लिश" #. generated from lang-table msgid "Estonian" msgstr "एस्टोनियन" #. generated from lang-table msgid "Finnish" msgstr "फिन्निश" #. generated from lang-table msgid "French" msgstr "फ्रेंच" #. generated from lang-table msgid "German" msgstr "जर्मन" #. generated from lang-table msgid "Gujarati" msgstr "गुजराती" #. generated from lang-table msgid "Hindi" msgstr "हिन्दी" #. generated from lang-table msgid "Hungarian" msgstr "हंगेरियन" #. generated from lang-table msgid "Icelandic" msgstr "आइसलैंडिक" #. generated from lang-table msgid "Indonesian" msgstr "इंडोनेशियन" #. generated from lang-table msgid "Italian" msgstr "इटालियन" #. generated from lang-table msgid "Japanese" msgstr "जापानी" #. generated from lang-table msgid "Korean" msgstr "कोरियाई" #. generated from lang-table msgid "Macedonian" msgstr "मेसीडोनियन" #. generated from lang-table msgid "Malay" msgstr "मलय" #. generated from lang-table msgid "Norwegian" msgstr "नार्वेजियन" #. generated from lang-table msgid "Northern Sotho" msgstr "उत्तरी सोथो" #. generated from lang-table msgid "Persian" msgstr "परसियन" #. generated from lang-table msgid "Polish" msgstr "पोलिश" #. generated from lang-table msgid "Portuguese" msgstr "पुर्तगाली" #. generated from lang-table msgid "Portuguese(Brazilian)" msgstr "पुर्तगाली (ब्राजीलियन)" #. generated from lang-table msgid "Punjabi" msgstr "पंजाबी" #. generated from lang-table msgid "Russian" msgstr "रूसी" #. generated from lang-table msgid "Serbian" msgstr "सर्वियन" #. generated from lang-table msgid "Serbian(Latin)" msgstr "सर्वियन (लैटिन)" #. generated from lang-table msgid "Slovak" msgstr "स्लोवाक" #. generated from lang-table msgid "Slovenian" msgstr "स्लोवेनियन" #. generated from lang-table msgid "Spanish" msgstr "स्पेनिश" #. generated from lang-table msgid "Swedish" msgstr "स्वीडिश" #. generated from lang-table msgid "Tamil" msgstr "तमिल" #. generated from lang-table msgid "Turkish" msgstr "तुर्किश" #. generated from lang-table msgid "Ukrainian" msgstr "यूक्रेनियन" #. generated from lang-table msgid "Vietnamese" msgstr "वियतनामी" #. generated from lang-table msgid "Welsh" msgstr "वेल्श" #. generated from lang-table msgid "Zulu" msgstr "जुलु"