# Afrikaans translations of anaconda. # Copyright (C) 2004 Zuza Software Foundation (Translate.org.za) # This file is distributed under the same license as the anaconda package. # Translate.org.za , 2005 # msgid "" msgstr "" "Project-Id-Version: anaconda\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2007-07-02 15:15-0400\n" "PO-Revision-Date: 2005-02-18 13:30+0200\n" "Last-Translator: Translate.org.za \n" "Language-Team: Afrikaans \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../anaconda:262 msgid "Unknown Error" msgstr "Onbekende fout" #: ../anaconda:265 #, c-format msgid "Error pulling second part of kickstart config: %s!" msgstr "Kon nie tweede deel van aansit-instelling trek nie: %s!" #: ../anaconda:279 ../cmdline.py:70 ../gui.py:960 ../text.py:403 #, c-format, python-format msgid "" "The following error was found while parsing your kickstart configuration:\n" "\n" "%s" msgstr "" "Die volgende fout het plaasgevind tydens ontleding van jou aansit-" "instelling:\n" "\n" "%s" #: ../anaconda:391 msgid "Press for a shell" msgstr "" #: ../anaconda:406 ../gui.py:237 ../rescue.py:260 ../rescue.py:334 #: ../rescue.py:361 ../rescue.py:371 ../rescue.py:450 ../rescue.py:456 #: ../text.py:443 ../text.py:602 ../vnc.py:146 ../textw/confirm_text.py:26 #: ../textw/confirm_text.py:54 ../textw/constants_text.py:36 #: ../textw/network_text.py:39 ../textw/network_text.py:49 #: ../textw/network_text.py:71 ../textw/network_text.py:77 #: ../textw/network_text.py:225 ../textw/network_text.py:812 #: ../textw/network_text.py:820 ../loader2/cdinstall.c:140 #: ../loader2/cdinstall.c:141 ../loader2/cdinstall.c:258 #: ../loader2/cdinstall.c:261 ../loader2/cdinstall.c:382 #: ../loader2/cdinstall.c:387 ../loader2/cdinstall.c:392 #: ../loader2/cdinstall.c:463 ../loader2/dirbrowser.c:139 #: ../loader2/driverdisk.c:93 ../loader2/driverdisk.c:281 #: ../loader2/driverdisk.c:312 ../loader2/driverdisk.c:346 #: ../loader2/driverdisk.c:384 ../loader2/driverdisk.c:398 #: ../loader2/driverdisk.c:412 ../loader2/driverdisk.c:422 #: ../loader2/driverdisk.c:583 ../loader2/driverdisk.c:620 #: ../loader2/driverselect.c:70 ../loader2/driverselect.c:205 #: ../loader2/hdinstall.c:106 ../loader2/hdinstall.c:157 #: ../loader2/hdinstall.c:319 ../loader2/hdinstall.c:369 #: ../loader2/hdinstall.c:404 ../loader2/hdinstall.c:474 #: ../loader2/hdinstall.c:517 ../loader2/hdinstall.c:530 ../loader2/kbd.c:131 #: ../loader2/kickstart.c:127 ../loader2/kickstart.c:137 #: ../loader2/kickstart.c:180 ../loader2/kickstart.c:279 #: ../loader2/kickstart.c:366 ../loader2/kickstart.c:523 ../loader2/lang.c:106 #: ../loader2/lang.c:369 ../loader2/loader.c:316 ../loader2/loader.c:342 #: ../loader2/loader.c:355 ../loader2/loader.c:366 ../loader2/loader.c:852 #: ../loader2/loader.c:1016 ../loader2/mediacheck.c:329 #: ../loader2/mediacheck.c:387 ../loader2/mediacheck.c:432 #: ../loader2/method.c:157 ../loader2/method.c:375 ../loader2/method.c:449 #: ../loader2/modules.c:1036 ../loader2/modules.c:1049 ../loader2/net.c:272 #: ../loader2/net.c:311 ../loader2/net.c:739 ../loader2/net.c:1064 #: ../loader2/net.c:1597 ../loader2/net.c:1620 ../loader2/net.c:1806 #: ../loader2/nfsinstall.c:57 ../loader2/nfsinstall.c:125 #: ../loader2/nfsinstall.c:205 ../loader2/nfsinstall.c:213 #: ../loader2/nfsinstall.c:251 ../loader2/telnetd.c:87 #: ../loader2/urlinstall.c:68 ../loader2/urlinstall.c:91 #: ../loader2/urlinstall.c:142 ../loader2/urlinstall.c:155 #: ../loader2/urlinstall.c:464 ../loader2/urlinstall.c:473 #: ../loader2/urlinstall.c:484 ../loader2/urls.c:282 ../loader2/urls.c:347 #: ../loader2/urls.c:352 ../loader2/urls.c:358 ../loader2/urls.c:470 msgid "OK" msgstr "OK" #: ../anaconda:413 msgid "" "You do not have enough RAM to use the graphical installer. Starting text " "mode." msgstr "" "Jy het nie genoeg geheue vir die grafiese installeerder nie. Begin tans in " "teksmodus." #: ../anaconda:429 msgid "No video hardware found, assuming headless" msgstr "Geen videohardeware gevind nie, neem aan dat koploos is" #: ../anaconda:436 ../anaconda:897 msgid "Unable to instantiate a X hardware state object." msgstr "Kon nie 'n X-hardewarestaatobjek instansieer nie." #: ../anaconda:493 msgid "Starting graphical installation..." msgstr "Begin tans grafiese installering..." #: ../anaconda:754 msgid "Install class forcing text mode installation" msgstr "Installeerklas dwing teksmodus-installering af" #: ../anaconda:794 msgid "Graphical installation not available... Starting text mode." msgstr "Grafiese installering nie beskikbaar nie... Begin tans in teksmodus." #: ../anaconda:802 msgid "DISPLAY variable not set. Starting text mode!" msgstr "" #: ../anaconda:863 #, fuzzy msgid "Unknown install method" msgstr "Onbekende URL-metode %s" #: ../anaconda:864 #, fuzzy msgid "You have specified an install method which isn't supported by anaconda." msgstr "" "Jy probeer op 'n rekenaar installeer wat nie met hierdie uitgawe van %s sal " "werk nie." #: ../anaconda:866 #, fuzzy, c-format msgid "unknown install method: %s" msgstr "Onbekende URL-metode %s" #: ../autopart.py:955 #, fuzzy, python-format msgid "" "Could not allocate cylinder-based partitions as primary partitions.\n" "\n" "%s" msgstr "Kom nie silindergebaseerde partisies as primêre partisies toeken nie" #: ../autopart.py:960 #, fuzzy, python-format msgid "" "Could not allocate partitions as primary partitions.\n" "\n" "%s" msgstr "Kom nie partisies as primêre partisies toeken nie" #: ../autopart.py:965 #, fuzzy, python-format msgid "" "Could not allocate cylinder-based partitions.\n" "\n" "%s" msgstr "Kon nie silindergebaseerde partisies toeken nie" #: ../autopart.py:1025 #, fuzzy, python-format msgid "" "Boot partition %s doesn't belong to a BSD disk label. SRM won't be able to " "boot from this partition. Use a partition belonging to a BSD disk label or " "change this device disk label to BSD." msgstr "" "Selflaaipartisie %s behoort nie aan 'n BDS-skyfetiket nie. SRM sal nie " "vanuit hierdie partisie kan selflaai nie. Gebruik 'n partisie wat aan 'n BSD-" "skyfetiket behoort, of verander hierdie toestel se skyfetiket na BSD." #: ../autopart.py:1027 #, python-format msgid "" "Boot partition %s doesn't belong to a disk with enough free space at its " "beginning for the bootloader to live on. Make sure that there's at least 5MB " "of free space at the beginning of the disk that contains /boot" msgstr "" "Selflaaipartisie %s behoort nie aan 'n skyf met voldoende oop spasie aan die " "begin van sy selflaaier om op te woon nie. Verseker dat daar ten minste 5 " "megagreep oop spasie aan die begin van die skyf is wat /boot bevat" #: ../autopart.py:1029 #, python-format msgid "" "Boot partition %s isn't a VFAT partition. EFI won't be able to boot from " "this partition." msgstr "" "Selflaaipartisie %s is nie 'n VFAT-partisie nie. EFI sal nie vanuit hierdie " "partisie kan selflaai nie." #: ../autopart.py:1031 #, fuzzy msgid "" "The boot partition must entirely be in the first 4GB of the disk. " "OpenFirmware won't be able to boot this installation." msgstr "" "Selflaaipartisie is nie vroeg genoeg op die skyf geleë nie. OpenFirmware sal " "nie vanuit hierdie partisie kan selflaai nie." #: ../autopart.py:1038 #, python-format msgid "" "Boot partition %s may not meet booting constraints for your architecture." msgstr "" "Selflaaipartisie %s voldoen dalk nie aan die selflaaivereistes van jou " "argitektuur nie." #: ../autopart.py:1064 #, python-format msgid "" "Adding this partition would not leave enough disk space for already " "allocated logical volumes in %s." msgstr "" "As jy tot hierdie partisie byvoeg, sal daar onvoldoende oop spasie vir die " "reeds toegekende volumes in %s wees." #: ../autopart.py:1259 msgid "Requested Partition Does Not Exist" msgstr "Gekose partisie bestaan nie" #: ../autopart.py:1260 #, fuzzy, python-format msgid "" "Unable to locate partition %s to use for %s.\n" "\n" "Press 'OK' to exit the installer." msgstr "" "Kon nie partisie %s opspoor om vir %s te gebruik nie.\n" "\n" "Druk 'OK' om jou rekenaar te laat herselflaai." #: ../autopart.py:1287 msgid "Requested Raid Device Does Not Exist" msgstr "Gekose Raid-toestel bestaan nie" #: ../autopart.py:1288 #, fuzzy, python-format msgid "" "Unable to locate raid device %s to use for %s.\n" "\n" "Press 'OK' to exit the installer." msgstr "" "Kon nie raid-toestel %s opspoor om vir %s te gebruik nie.\n" "\n" "Druk 'OK' om jou rekenaar te laat herselflaai." #: ../autopart.py:1319 msgid "Requested Volume Group Does Not Exist" msgstr "Gekose volumegroep bestaan nie" #: ../autopart.py:1320 #, fuzzy, python-format msgid "" "Unable to locate volume group %s to use for %s.\n" "\n" "Press 'OK' to exit the installer." msgstr "" "Kon nie volumegroep %s opspoor om vir %s te gebruik nie.\n" "\n" "Druk 'OK' om jou rekenaar te laat herselflaai." #: ../autopart.py:1357 msgid "Requested Logical Volume Does Not Exist" msgstr "Gekose logiese volume bestaan nie" #: ../autopart.py:1358 #, fuzzy, python-format msgid "" "Unable to locate logical volume %s to use for %s.\n" "\n" "Press 'OK' to exit the installer." msgstr "" "Kon nie logiese volume %s opspoor om vir %s te gebruik nie.\n" "\n" "Druk 'OK' om jou rekenaar te laat herselflaai." #: ../autopart.py:1484 ../autopart.py:1531 msgid "Automatic Partitioning Errors" msgstr "Outomatiesepartisiëring-foute" #: ../autopart.py:1485 #, fuzzy, python-format msgid "" "The following errors occurred with your partitioning:\n" "\n" "%s\n" "\n" "Press 'OK' to exit the installer." msgstr "" "Die volgende foute het tydens partisiëring plaasgevind:\n" "\n" "%s\n" "\n" "Druk 'OK' om jou rekenaar te laat herselflaai." #: ../autopart.py:1495 msgid "Warnings During Automatic Partitioning" msgstr "Waarskuwings tydens outomatiese partisiëring" #: ../autopart.py:1496 #, python-format msgid "" "Following warnings occurred during automatic partitioning:\n" "\n" "%s" msgstr "" "Die volgende waarskuwings is tydens outomatiese partisiëring gegee:\n" "\n" "%s" #: ../autopart.py:1510 ../autopart.py:1527 #, fuzzy msgid "" "\n" "\n" "Press 'OK' to exit the installer." msgstr "" "\n" "\n" "Druk 'OK' om jou rekenaar te laat herselflaai." #: ../autopart.py:1511 ../iw/partition_gui.py:997 #: ../textw/partition_text.py:239 msgid "Error Partitioning" msgstr "Kon nie partisieer nie" #: ../autopart.py:1512 #, python-format msgid "" "Could not allocate requested partitions: \n" "\n" "%s.%s" msgstr "" "Kon nie gekose partisies toeken nie: \n" "\n" "%s.%s" #: ../autopart.py:1529 msgid "" "\n" "\n" "Press 'OK' to choose a different partitioning option." msgstr "" #: ../autopart.py:1532 #, fuzzy, python-format msgid "" "The following errors occurred with your partitioning:\n" "\n" "%s\n" "\n" "This can happen if there is not enough space on your hard drive(s) for the " "installation. %s" msgstr "" "Die volgende foute het tydens partisiëring plaasgevind:\n" "\n" "%s\n" "\n" "Dit kan gebeur as daar nie voldoende oop spasie op jou hardeskyf/-skywe vir " "installering is nie.%s" #: ../autopart.py:1543 msgid "Unrecoverable Error" msgstr "Onherwinbare fout" #: ../autopart.py:1544 msgid "Your system will now be rebooted." msgstr "Jou rekenaar sal nou herselflaai word." #: ../autopart.py:1691 ../bootloader.py:197 ../image.py:442 #: ../partedUtils.py:304 ../partedUtils.py:334 ../partedUtils.py:1075 #: ../partedUtils.py:1124 ../partedUtils.py:1167 ../upgrade.py:348 #: ../yuminstall.py:1205 ../iw/blpasswidget.py:145 #: ../iw/bootloader_advanced_gui.py:41 ../iw/task_gui.py:89 #: ../iw/upgrade_swap_gui.py:188 ../iw/upgrade_swap_gui.py:196 #: ../iw/upgrade_swap_gui.py:203 ../textw/bootloader_text.py:123 #: ../textw/bootloader_text.py:448 ../textw/partition_text.py:243 #: ../textw/upgrade_text.py:172 ../loader2/loader.c:411 msgid "Warning" msgstr "Waarskuwings" #: ../autopart.py:1697 msgid "" "Automatic Partitioning sets partitions based on the selected installation " "type. You also can customize the partitions once they have been created.\n" "\n" "The manual disk partitioning tool, Disk Druid, allows you to create " "partitions in an interactive environment. You can set the file system types, " "mount points, partition sizes, and more." msgstr "" "Outomatiese partisiëring stel partisies op gebaseer op die geselekteerde " "installeersoort. Jy kan ook die partisies doelmaak sodra hulle geskep is.\n" "\n" "Die nutsding vir handmatige skyfpartisiëring, Disk Druid, stel jou in staat " "om partisies interaktief te skep. Jy kan die lêerstelselsoorte, hegpunte, " "partisiegroottes en dies meer opstel." #: ../autopart.py:1708 msgid "" "Before automatic partitioning can be set up by the installation program, you " "must choose how to use the space on your hard drives." msgstr "" "Voor outomatiese partisiëring deur die installeerprogram opgestel kan word, " "moet jy besluit hoe die spasie op jou hardeskyf benut moet word." #: ../autopart.py:1713 msgid "Remove all partitions on this system" msgstr "Verwyder alle partisies op hierdie rekenaar" #: ../autopart.py:1714 msgid "Remove all Linux partitions on this system" msgstr "Verwyder alle Linux-partisies op hierdie rekenaar" #: ../autopart.py:1715 msgid "Keep all partitions and use existing free space" msgstr "Behou alle partisies en gebruik bestaande oop spasie" #: ../autopart.py:1717 #, python-format msgid "" "You have chosen to remove all partitions (ALL DATA) on the following drives:%" "s\n" "Are you sure you want to do this?" msgstr "" "Jy het gekies om alle partisies (ALLE DATA) op die volgende aandrywers te " "verwyder:%s\n" "Is jy seker jy wil dit doen?" #: ../autopart.py:1721 #, python-format msgid "" "You have chosen to remove all Linux partitions (and ALL DATA on them) on the " "following drives:%s\n" "Are you sure you want to do this?" msgstr "" "Jy het gekies om alle Linux-partisies (en ALLE DATA daarop) op die volgende " "aandrywers te verwyder:%s\n" "Is jy seker jy wil dit doen?" #: ../backend.py:113 #, fuzzy, python-format msgid "Upgrading %s\n" msgstr "" "Gradeer %s-pakkette op\n" "\n" #: ../backend.py:115 #, fuzzy, python-format msgid "Installing %s\n" msgstr "_Installeer %s" #: ../bootloader.py:129 msgid "Bootloader" msgstr "Selflaaier" #: ../bootloader.py:129 msgid "Installing bootloader..." msgstr "Installeer tans selflaaier..." #: ../bootloader.py:198 msgid "" "No kernel packages were installed on your system. Your boot loader " "configuration will not be changed." msgstr "" "Geen kernpakkette is op jou rekenaar geïnstalleer nie. Jou selflaaier-" "instelling sal nie verander word nie." #: ../cmdline.py:45 msgid "Completed" msgstr "Afgehandel" #: ../cmdline.py:53 msgid "In progress... " msgstr "Besig... " #: ../cmdline.py:82 msgid "Can't have a question in command line mode!" msgstr "Kan nie 'n vraag in bevelreëlmodus vra nie!" #: ../cmdline.py:101 msgid "Parted exceptions can't be handled in command line mode!" msgstr "Geparte uitsonderings kan nie in bevelreëlmodus hanteer word nie!" #: ../constants.py:65 #, fuzzy, python-format msgid "" "An unhandled exception has occurred. This is most likely a bug. Please " "save a copy of the detailed exception and file a bug report against anaconda " "at %s" msgstr "" "'n Onhanteerde uitsondering het voorgekom. Dis waarskynlik 'n programfout. " "Kopieer die volledige teks van hierdie uitsondering en dien 'n " "gedetailleerde verslag oor anaconda in by http://bugzilla.redhat.com/" "bugzilla/" #: ../exception.py:412 ../exception.py:429 msgid "Dump Written" msgstr "Storting geskryf" #: ../exception.py:413 #, fuzzy msgid "" "Your system's state has been successfully written to the floppy. The " "installer will now exit." msgstr "" "Jou rekenaar se staat is suksesvol na die stiffie geskryf. Jou rekenaar sal " "jou teruggestel word." #: ../exception.py:416 ../exception.py:433 ../fsset.py:1457 ../fsset.py:1742 #: ../fsset.py:2440 ../fsset.py:2447 ../gui.py:965 ../gui.py:1114 #: ../image.py:452 ../livecd.py:356 ../upgrade.py:59 ../yuminstall.py:1051 #, fuzzy msgid "_Exit installer" msgstr "%s-installeerder" #: ../exception.py:421 ../exception.py:438 #, fuzzy msgid "Dump Not Written" msgstr "Storting geskryf" #: ../exception.py:422 msgid "There was a problem writing the system state to the floppy." msgstr "" #: ../exception.py:430 #, fuzzy msgid "" "Your system's state has been successfully written to the remote host. The " "installer will now exit." msgstr "" "Jou rekenaar se staat is suksesvol na die stiffie geskryf. Jou rekenaar sal " "jou teruggestel word." #: ../exception.py:439 msgid "There was a problem writing the system state to the remote host." msgstr "" #: ../fsset.py:216 msgid "Checking for Bad Blocks" msgstr "Kontroleer vir slegte blokke" #: ../fsset.py:217 #, python-format msgid "Checking for bad blocks on /dev/%s..." msgstr "Kontroleer tans vir slegte blokke op /dev/%s..." #: ../fsset.py:663 ../fsset.py:1427 ../fsset.py:1458 ../fsset.py:1518 #: ../fsset.py:1529 ../fsset.py:1583 ../fsset.py:1594 ../fsset.py:1634 #: ../fsset.py:1684 ../fsset.py:1765 ../fsset.py:1777 ../image.py:135 #: ../image.py:180 ../image.py:311 ../livecd.py:350 ../partIntfHelpers.py:406 #: ../urlinstall.py:112 ../urlinstall.py:206 ../yuminstall.py:442 #: ../yuminstall.py:762 ../yuminstall.py:802 ../yuminstall.py:1019 #: ../yuminstall.py:1044 ../iw/autopart_type.py:74 ../iw/autopart_type.py:209 #: ../iw/netconfig_dialog.py:267 ../iw/osbootwidget.py:216 #: ../iw/osbootwidget.py:225 ../iw/raid_dialog_gui.py:618 #: ../iw/raid_dialog_gui.py:657 ../iw/task_gui.py:79 ../iw/task_gui.py:145 #: ../textw/grpselect_text.py:116 ../textw/partition_text.py:1692 #: ../textw/partition_text.py:1698 ../textw/partition_text.py:1720 #: ../textw/upgrade_text.py:160 ../textw/upgrade_text.py:167 #: ../loader2/cdinstall.c:141 ../loader2/cdinstall.c:463 #: ../loader2/driverdisk.c:93 ../loader2/driverdisk.c:346 #: ../loader2/driverdisk.c:384 ../loader2/driverdisk.c:412 #: ../loader2/driverdisk.c:422 ../loader2/driverdisk.c:486 #: ../loader2/hdinstall.c:106 ../loader2/hdinstall.c:157 #: ../loader2/hdinstall.c:369 ../loader2/hdinstall.c:474 #: ../loader2/hdinstall.c:517 ../loader2/hdinstall.c:530 #: ../loader2/kickstart.c:279 ../loader2/lang.c:106 ../loader2/loader.c:316 #: ../loader2/loader.c:366 ../loader2/loader.c:852 ../loader2/mediacheck.c:329 #: ../loader2/mediacheck.c:387 ../loader2/method.c:157 ../loader2/method.c:375 #: ../loader2/method.c:449 ../loader2/nfsinstall.c:125 #: ../loader2/nfsinstall.c:205 ../loader2/nfsinstall.c:213 #: ../loader2/telnetd.c:87 ../loader2/urlinstall.c:68 #: ../loader2/urlinstall.c:91 ../loader2/urlinstall.c:142 #: ../loader2/urlinstall.c:155 ../loader2/urls.c:347 ../loader2/urls.c:352 msgid "Error" msgstr "Fout" #: ../fsset.py:664 #, python-format msgid "" "An error occurred migrating %s to ext3. It is possible to continue without " "migrating this file system if desired.\n" "\n" "Would you like to continue without migrating %s?" msgstr "" "Daar was fout met migrasie van %s na ext3. Indien jy wil, is dit moontlik om " "voort te gaan sonder om hierdie lêerstelsel te migreer.\n" "\n" "Wil jy voortgaan sonder dat %s gemigreer is?" #: ../fsset.py:1334 msgid "RAID Device" msgstr "RAID-toestel" #: ../fsset.py:1338 ../fsset.py:1344 msgid "Apple Bootstrap" msgstr "Apple-selflaaier" #: ../fsset.py:1349 ../partitions.py:900 msgid "PPC PReP Boot" msgstr "PPC PReP-selflaai" #: ../fsset.py:1352 msgid "First sector of boot partition" msgstr "Eerste sektor van selflaaipartisie" #: ../fsset.py:1353 msgid "Master Boot Record (MBR)" msgstr "Meesterselflaairekord (MBR)" #: ../fsset.py:1428 #, fuzzy, python-format msgid "" "An error occurred trying to initialize swap on device %s. This problem is " "serious, and the install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "Daar was fout met die inisialiseer van die ruilruimte op toestel %s. Hierdie " "probleem is ernstig, en daarom kan die installering nie voortgaan nie.\n" "\n" "Druk om jou rekenaar te laat herselflaai." #: ../fsset.py:1457 ../packages.py:282 ../rescue.py:300 ../rescue.py:302 #: ../textw/upgrade_text.py:118 ../loader2/cdinstall.c:258 #: ../loader2/cdinstall.c:261 ../loader2/method.c:422 msgid "Skip" msgstr "Oorslaan" #: ../fsset.py:1478 #, python-format msgid "" "The swap device:\n" "\n" " /dev/%s\n" "\n" "is a version 0 Linux swap partition. If you want to use this device, you " "must reformat as a version 1 Linux swap partition. If you skip it, the " "installer will ignore it during the installation." msgstr "" #: ../fsset.py:1485 #, fuzzy msgid "Reformat" msgstr "Formaat" #: ../fsset.py:1489 #, python-format msgid "" "The swap device:\n" "\n" " /dev/%s\n" "\n" "in your /etc/fstab file is currently in use as a software suspend partition, " "which means your system is hibernating. To perform an upgrade, please shut " "down your system rather than hibernating it." msgstr "" #: ../fsset.py:1497 #, python-format msgid "" "The swap device:\n" "\n" " /dev/%s\n" "\n" "in your /etc/fstab file is currently in use as a software suspend partition, " "which means your system is hibernating. If you are performing a new install, " "make sure the installer is set to format all swap partitions." msgstr "" #: ../fsset.py:1507 msgid "" "\n" "\n" "Choose Skip if you want the installer to ignore this partition during the " "upgrade. Choose Format to reformat the partition as swap space." msgstr "" #: ../fsset.py:1512 ../iw/partition_gui.py:368 msgid "Format" msgstr "Formaat" #: ../fsset.py:1519 #, fuzzy, python-format msgid "" "Error enabling swap device %s: %s\n" "\n" "The /etc/fstab on your upgrade partition does not reference a valid swap " "partition.\n" "\n" "Press OK to exit the installer." msgstr "" "Kon nie ruiltoestel %s aktiveer nie: %s\n" "\n" "Die /etc/fstab op jou opgradeerpartisie verwys nie na 'n geldige " "ruilpartisie nie.\n" "\n" "Druk OK om jou rekenaar te laat herselflaai." #: ../fsset.py:1530 #, fuzzy, python-format msgid "" "Error enabling swap device %s: %s\n" "\n" "This most likely means this swap partition has not been initialized.\n" "\n" "Press OK to exit the installer." msgstr "" "Kon nie ruiltoestel %s aktiveer nie: %s\n" "\n" "Dis waarskynlik omdat die ruilpartisie moontlik nie geïnisialiseer is nie.\n" "\n" "Druk OK om jou rekenaar te laat herselflaai." #: ../fsset.py:1584 #, fuzzy, python-format msgid "" "Bad blocks have been detected on device /dev/%s. We do not recommend you use " "this device.\n" "\n" "Press to exit the installer." msgstr "" "Slegte blokke is op toestel /dev/%s bespeur. Ons beveel aan dat jy nie " "hierdie toestel gebruik nie.\n" "\n" "Druk om jou rekenaar te laat herselflaai" #: ../fsset.py:1595 #, fuzzy, python-format msgid "" "An error occurred searching for bad blocks on %s. This problem is serious, " "and the install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "Daar was fout met die soek vir slegte blokke op %s. Hierdie probleem is " "ernstig, en daarom kan die installering nie voortgaan nie.\n" "\n" "Druk om jou rekenaar te laat herselflaai." #: ../fsset.py:1635 #, fuzzy, python-format msgid "" "An error occurred trying to format %s. This problem is serious, and the " "install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "Daar was fout met die formateer van %s. Hierdie probleem is ernstig, en " "daarom kan die installering nie voortgaan nie.\n" "\n" "Druk om jou rekenaar te laat herselflaai." #: ../fsset.py:1685 #, fuzzy, python-format msgid "" "An error occurred trying to migrate %s. This problem is serious, and the " "install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "Daar was fout met die migreer van %s. Hierdie probleem is ernstig, en daarom " "kan die installering nie voortgaan nie.\n" "\n" "Druk om jou rekenaar te laat herselflaai." #: ../fsset.py:1711 ../fsset.py:1720 msgid "Invalid mount point" msgstr "Ongeldige hegpunt" #: ../fsset.py:1712 #, fuzzy, python-format msgid "" "An error occurred when trying to create %s. Some element of this path is " "not a directory. This is a fatal error and the install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "Daar was fout met die poging om %s te skep. Een van die elemente in hierdie " "pad is nie 'n gids nie. Dis 'n fatale fout en die installering kan dus nie " "voortgaan nie.\n" "\n" "Druk om jou rekenaar te laat herselflaai." #: ../fsset.py:1721 #, fuzzy, python-format msgid "" "An error occurred when trying to create %s: %s. This is a fatal error and " "the install cannot continue.\n" "\n" "Press to exit the installer." msgstr "" "Daar was fout met die poging om %s te skep: %s. Dis 'n fatale fout en die " "installering kan dus nie voortgaan nie.\n" "\n" "Druk om jou rekenaar te laat herselflaai." #: ../fsset.py:1734 #, fuzzy msgid "Unable to mount filesystem" msgstr "Kon nie lêer laai nie!" #: ../fsset.py:1735 #, python-format msgid "" "An error occurred mounting device %s as %s. You may continue installation, " "but there may be problems." msgstr "" #: ../fsset.py:1743 ../image.py:93 ../image.py:453 ../kickstart.py:1008 #: ../kickstart.py:1046 ../partedUtils.py:1179 ../upgrade.py:59 #: ../yuminstall.py:754 ../iw/partition_gui.py:1011 msgid "_Continue" msgstr "_Gaan voort" #: ../fsset.py:1751 #, fuzzy, python-format msgid "" "Error mounting device %s as %s: %s\n" "\n" "Devices in /etc/fstab should be specified by label, not by device name.\n" "\n" "Press OK to exit the installer." msgstr "" "Kon nie toestel %s as %s heg nie: %s\n" "\n" "Dis waarskynlik omdat hierdie partisie moontlik nie geformateer is nie.\n" "\n" "Druk OK om jou rekenaar te laat herselflaai." #: ../fsset.py:1758 #, fuzzy, python-format msgid "" "Error mounting device %s as %s: %s\n" "\n" "This most likely means this partition has not been formatted.\n" "\n" "Press OK to exit the installer." msgstr "" "Kon nie toestel %s as %s heg nie: %s\n" "\n" "Dis waarskynlik omdat hierdie partisie moontlik nie geformateer is nie.\n" "\n" "Druk OK om jou rekenaar te laat herselflaai." #: ../fsset.py:1778 #, fuzzy msgid "" "Error finding / entry.\n" "\n" "This is most likely means that your fstab is incorrect.\n" "\n" "Press OK to exit the installer." msgstr "" "Kon nie /-inskrywing vind nie.\n" "\n" "Dis waarskynlik omdat jou fstab moontlik nie korrek is nie.\n" "\n" "Druk OK om jou rekenaar te laat herselflaai." #: ../fsset.py:2432 msgid "Duplicate Labels" msgstr "Duplikaatetikette" #: ../fsset.py:2433 #, python-format msgid "" "Multiple devices on your system are labelled %s. Labels across devices must " "be unique for your system to function properly.\n" "\n" "Please fix this problem and restart the installation process." msgstr "" "Meervoudige toestelle op jou rekenaar heet %s. Elke toestel se etiket moet " "uniek wees as jou rekenaar behoorlik wil werk.\n" "\n" "Stel hierdie probleem reg en begin die installeerproses van voor af." #: ../fsset.py:2442 #, fuzzy msgid "Invalid Label" msgstr "Ongeldige selflaaietiket" #: ../fsset.py:2443 #, fuzzy, python-format msgid "" "An invalid label was found on device %s. Please fix this problem and " "restart the installation process." msgstr "" "Meervoudige toestelle op jou rekenaar heet %s. Elke toestel se etiket moet " "uniek wees as jou rekenaar behoorlik wil werk.\n" "\n" "Stel hierdie probleem reg en begin die installeerproses van voor af." #: ../fsset.py:2701 msgid "Formatting" msgstr "Formatering" #: ../fsset.py:2702 #, python-format msgid "Formatting %s file system..." msgstr "Formateer tans %s-lêerstelsel..." #: ../gui.py:109 msgid "An error occurred copying the screenshots over." msgstr "Daar was fout met kopieer van skermkiekies." #: ../gui.py:120 msgid "Screenshots Copied" msgstr "Skermkiekies gekopieer" #: ../gui.py:121 msgid "" "The screenshots have been saved into the directory:\n" "\n" "\t/root/anaconda-screenshots/\n" "\n" "You can access these when you reboot and login as root." msgstr "" "Die skermkiekies is in die volgende gids gestoor:\n" "\n" "\t/root/anaconda-screenshots/\n" "\n" "Jy kan toegang daartoe verkry wanneer jy herselflaai en as wortelgebruiker " "aanmeld." #: ../gui.py:164 msgid "Saving Screenshot" msgstr "Stoor van skermkiekie" #: ../gui.py:165 #, python-format msgid "A screenshot named '%s' has been saved." msgstr "'n Skermkiekie genaamd '%s' is gestoor." #: ../gui.py:168 msgid "Error Saving Screenshot" msgstr "Kon nie skermkiekie stoor nie" #: ../gui.py:169 msgid "" "An error occurred while saving the screenshot. If this occurred during " "package installation, you may need to try several times for it to succeed." msgstr "" "Daar was fout met die stoor van die skermkiekie. As dit plaasgevind het " "tydens pakket-installering, moet jy 'n paar keer probeer voor dit sal werk." #: ../gui.py:234 ../text.py:440 msgid "Fix" msgstr "Herstel" #: ../gui.py:235 ../rescue.py:217 ../text.py:441 #: ../textw/bootloader_text.py:68 ../textw/constants_text.py:48 #: ../loader2/driverdisk.c:526 ../loader2/driverdisk.c:536 #: ../loader2/hdinstall.c:265 ../loader2/loader.c:411 msgid "Yes" msgstr "Ja" #: ../gui.py:236 ../rescue.py:217 ../rescue.py:219 ../text.py:442 #: ../textw/bootloader_text.py:68 ../textw/constants_text.py:52 #: ../loader2/driverdisk.c:526 ../loader2/driverdisk.c:536 #: ../loader2/loader.c:411 msgid "No" msgstr "Nee" #: ../gui.py:238 ../text.py:444 ../text.py:572 ../loader2/net.c:97 #: ../loader2/net.c:329 ../loader2/net.c:583 ../loader2/net.c:691 #: ../loader2/net.c:791 ../loader2/net.c:799 ../loader2/net.c:1193 #: ../loader2/net.c:1199 msgid "Retry" msgstr "Weer probeer" #: ../gui.py:239 ../text.py:445 msgid "Ignore" msgstr "Ignoreer" #: ../gui.py:240 ../gui.py:780 ../partIntfHelpers.py:237 #: ../partIntfHelpers.py:529 ../text.py:106 ../text.py:107 ../text.py:417 #: ../text.py:419 ../text.py:446 ../iw/bootloader_advanced_gui.py:47 #: ../textw/bootloader_text.py:198 ../textw/constants_text.py:40 #: ../loader2/dirbrowser.c:139 ../loader2/driverdisk.c:282 #: ../loader2/kickstart.c:366 ../loader2/loader.c:355 msgid "Cancel" msgstr "Kanselleer" #: ../gui.py:607 ../text.py:360 #, fuzzy msgid "Installation Key" msgstr "Installeertipe" #: ../gui.py:790 tmp/anaconda.glade.h:2 tmp/exn.glade.h:3 msgid "_Debug" msgstr "_Ontfout" #: ../gui.py:962 ../text.py:405 msgid "Error Parsing Kickstart Config" msgstr "Kon nie aansit-instelling ontleed nie" #: ../gui.py:970 ../text.py:415 msgid "" "Please insert a floppy now. All contents of the disk will be erased, so " "please choose your diskette carefully." msgstr "" "Steek 'n stiffie nou in. Al die inhoud op die stiffie sal uitgewis word; " "maak dus seker jy kies die regte stiffie." #: ../gui.py:1017 msgid "default:LTR" msgstr "default:LTR" #: ../gui.py:1103 ../text.py:567 msgid "Error!" msgstr "Fout!" #: ../gui.py:1104 ../text.py:568 #, python-format msgid "" "An error occurred when attempting to load an installer interface component.\n" "\n" "className = %s" msgstr "" "Daar was fout tydens poging om 'n installeerkoppelvlakkomponent te laai.\n" "\n" "className = %s" #: ../gui.py:1109 ../harddrive.py:80 ../harddrive.py:126 ../image.py:526 #: ../packages.py:331 ../packages.py:336 msgid "_Exit" msgstr "_Afsluit" #: ../gui.py:1110 ../harddrive.py:81 ../image.py:527 ../yuminstall.py:445 #: ../yuminstall.py:748 ../yuminstall.py:796 ../yuminstall.py:1015 msgid "_Retry" msgstr "_Weer probeer" #: ../gui.py:1113 ../packages.py:335 msgid "The installer will now exit..." msgstr "Die installeerder sal nou afsluit..." #: ../gui.py:1116 ../packages.py:338 msgid "Your system will now be rebooted..." msgstr "Jou rekenaar sal nou herselflaai word..." #: ../gui.py:1117 ../image.py:93 ../packages.py:339 ../partedUtils.py:1178 #: ../iw/confirm_gui.py:32 ../textw/confirm_text.py:38 #: ../textw/confirm_text.py:66 msgid "_Reboot" msgstr "_Herselflaai" #: ../gui.py:1119 #, fuzzy msgid "Exiting" msgstr "Sluit af" #: ../gui.py:1186 #, python-format msgid "%s Installer" msgstr "%s-installeerder" #: ../gui.py:1193 msgid "Unable to load title bar" msgstr "Kon nie die titelbalk laai nie" #: ../gui.py:1247 msgid "Install Window" msgstr "Installeervenster" #: ../harddrive.py:44 ../image.py:146 ../image.py:483 #, fuzzy, python-format msgid "" "The file %s cannot be opened. This is due to a missing file or perhaps a " "corrupt package. Please verify your installation images and that you have " "all the required media.\n" "\n" "If you exit, your system will be left in an inconsistent state that will " "likely require reinstallation.\n" "\n" msgstr "" "Die pakket%s-%s-%s kan nie geopen word nie. Dis te wyte aan 'n vermiste lêer " "of dalk 'n korrupte pakket. As jy van CD-media af installeer, beteken dit " "gewoonlik dat die CD-media korrup is, of dat die CD-aandrywer nie die media " "kan lees nie.\n" "\n" "Druk om weer te probeer." #: ../harddrive.py:71 ../image.py:516 msgid "Missing ISO 9660 Image" msgstr "" #: ../harddrive.py:72 #, python-format msgid "" "The installer has tried to mount image #%s, but cannot find it on the hard " "drive.\n" "\n" "Please copy this image to the drive and click Retry. Click Exit to abort " "the installation." msgstr "" #: ../harddrive.py:117 msgid "Couldn't Mount ISO Source" msgstr "" #: ../harddrive.py:118 #, python-format msgid "" "An error occurred mounting the source device %s. This may happen if your " "ISO images are located on an advanced storage device like LVM or RAID, or if " "there was a problem mounting a partition. Click exit to abort the " "installation." msgstr "" #: ../image.py:84 msgid "Required Install Media" msgstr "Vereiste installeermedia" #: ../image.py:85 #, fuzzy, python-format msgid "" "The software you have selected to install will require the following discs:\n" "\n" "%s\n" "Please have these ready before proceeding with the installation. If you " "need to abort the installation and exit please select \"Reboot\"." msgstr "" "Die sagteware wat jy vir installeer gekies het, vereis die volgende CD's:\n" "\n" "%s\n" "Maak seker jy het dit gereed voor jy met die installering voortgaan. As jy " "die installering moet staak en herselflaai, kies \"Herselflaai\"." #: ../image.py:93 ../livecd.py:355 ../packages.py:285 ../packages.py:336 #: ../packages.py:339 ../yuminstall.py:1051 ../iw/confirm_gui.py:32 #: ../textw/confirm_text.py:38 ../textw/confirm_text.py:66 msgid "_Back" msgstr "_Terug" #: ../image.py:136 ../urlinstall.py:207 #, fuzzy, python-format msgid "" "An error occurred unmounting the disc. Please make sure you're not " "accessing %s from the shell on tty2 and then click OK to retry." msgstr "" "Daar was fout met ontheg van CD. Maak seker jy koppel nie tans uit die dop " "op tty2 aan %s nie, en kliek OK om weer te probeer." #: ../image.py:170 ../urlinstall.py:102 msgid "Copying File" msgstr "Kopieer van lêer" #: ../image.py:171 ../urlinstall.py:103 msgid "Transferring install image to hard drive..." msgstr "Dra tans installeerbeeld na hardeskyf oor..." #: ../image.py:181 ../urlinstall.py:113 msgid "" "An error occurred transferring the install image to your hard drive. You are " "probably out of disk space." msgstr "" "Daar was fout tydens oordra van installeerbeeld na jou hardeskyf. Jy het " "moontlik nie meer spasie nie." #: ../image.py:270 #, fuzzy msgid "Change Disc" msgstr "Verander CD-ROM" #: ../image.py:271 #, python-format msgid "Please insert %s disc %d to continue." msgstr "Steek %s-skyf %d in om voort te gaan." #: ../image.py:305 #, fuzzy msgid "Wrong Disc" msgstr "Verkeerde CD-ROM" #: ../image.py:306 #, fuzzy, python-format msgid "That's not the correct %s disc." msgstr "Dis nie die regte %s-CD-ROM nie." #: ../image.py:312 #, fuzzy msgid "Unable to access the disc." msgstr "Kon nie toegang tot CD-ROM kry nie." #: ../image.py:369 #, fuzzy, python-format msgid "" "The file %s cannot be opened. This is due to a missing file or perhaps a " "corrupt package. Please verify your installation tree contains all required " "packages.\n" "\n" "If you exit, your system will be left in an inconsistent state that will " "likely require reinstallation.\n" "\n" msgstr "" "Die pakket%s-%s-%s kan nie geopen word nie. Dis te wyte aan 'n vermiste lêer " "of dalk 'n korrupte pakket. As jy van CD-media af installeer, beteken dit " "gewoonlik dat die CD-media korrup is, of dat die CD-aandrywer nie die media " "kan lees nie.\n" "\n" "Druk om weer te probeer." #: ../image.py:443 #, python-format msgid "" "The ISO image %s has a size which is not a multiple of 2048 bytes. This may " "mean it was corrupted on transfer to this computer.\n" "\n" "It is recommended that you exit and abort your installation, but you can " "choose to continue if you think this is in error." msgstr "" #: ../image.py:517 #, python-format msgid "" "The installer has tried to mount image #%s, but cannot find it on the " "server.\n" "\n" "Please copy this image to the remote server's share path and click Retry. " "Click Exit to abort the installation." msgstr "" #: ../installclass.py:67 msgid "Install on System" msgstr "Installeer op rekenaar" #: ../iscsi.py:199 ../iscsi.py:200 #, fuzzy msgid "Initializing iSCSI initiator" msgstr "Inisialisering" #: ../kickstart.py:75 msgid "Scriptlet Failure" msgstr "" #: ../kickstart.py:76 #, fuzzy, python-format msgid "" "There was an error running the scriptlet. You may examine the output in %" "s. This is a fatal error and your install will be aborted.\n" "\n" "Press the OK button to exit the installer." msgstr "" "Daar was fout tydens installeer van %s. Dit kan te wyte aan mediafaling, te " "min spasie en/of hardewareprobleme wees. Dis 'n fatale fout en die " "installering sal dus gestaak word. Maak seker van jou media en probeer weer " "installeer.\n" "\n" "Druk die OK-knoppie om jou rekenaar te laat herselflaai." #: ../kickstart.py:951 ../kickstart.py:968 #, fuzzy msgid "Running..." msgstr "Verbind..." #: ../kickstart.py:952 msgid "Running post-install scripts" msgstr "" #: ../kickstart.py:969 msgid "Running pre-install scripts" msgstr "" #: ../kickstart.py:1000 msgid "Missing Package" msgstr "Vermiste pakket" #: ../kickstart.py:1001 #, python-format msgid "" "You have specified that the package '%s' should be installed. This package " "does not exist. Would you like to continue or abort your installation?" msgstr "" "Jy het gespesifiseer dat die pakket '%s' geïnstalleer moet word. Daar is nie " "so 'n pakket nie. Wil jy voortgaan of jou installering staak?" #: ../kickstart.py:1007 ../kickstart.py:1045 ../yuminstall.py:748 #: ../yuminstall.py:751 msgid "_Abort" msgstr "_Staak" #: ../kickstart.py:1037 msgid "Missing Group" msgstr "Vermiste groep" #: ../kickstart.py:1038 #, fuzzy, python-format msgid "" "You have specified that the group '%s' should be installed. This group does " "not exist. Would you like to continue or abort your installation?" msgstr "" "Jy het gespesifiseer dat die groep '%s' geïnstalleer moet word. Daar is nie " "so 'n groep nie. Wil jy voortgaan of jou installering staak?" #: ../livecd.py:93 #, fuzzy msgid "Unable to find image" msgstr "Kon nie installeerprent %s vind nie" #: ../livecd.py:94 #, python-format msgid "" "The given location isn't a valid %s live CD to use as an installation source." msgstr "" #: ../livecd.py:98 #, fuzzy msgid "Exit installer" msgstr "%s-installeerder" #: ../livecd.py:174 #, fuzzy msgid "Copying live image to hard drive." msgstr "Dra tans installeerbeeld na hardeskyf oor..." #: ../livecd.py:203 #, fuzzy msgid "Doing post-installation" msgstr "%s %s installering" #: ../livecd.py:204 #, fuzzy msgid "" "Performing post-installation filesystem changes. This may take several " "minutes..." msgstr "Begin installeerproses, dit mag 'n hele paar minute duur..." #: ../network.py:51 msgid "Hostname must be 64 or less characters in length." msgstr "Gasheernaam moet 64 karakters lank of minder wees." #: ../network.py:54 msgid "Hostname must start with a valid character in the range 'a-z' or 'A-Z'" msgstr "Gasheer moet begin met 'n geldige karakter in die reeks 'a-z' of 'A-Z'" #: ../network.py:59 msgid "Hostnames can only contain the characters 'a-z', 'A-Z', '-', or '.'" msgstr "Gasheernaam kan net die karakters 'a-z', 'A-Z', '-', of '.' bevat" #: ../network.py:89 #, fuzzy msgid "IP address is missing." msgstr "IP-adres word vermis" #: ../network.py:93 #, fuzzy msgid "" "IPv4 addresses must contain four numbers between 0 and 255, separated by " "periods." msgstr "IP-adresse moet syfers van 0 tot 255 bevat" #: ../network.py:96 #, fuzzy, python-format msgid "'%s' is not a valid IPv6 address." msgstr "%s is nie 'n geldige gasheernaam nie." #: ../network.py:98 #, fuzzy, python-format msgid "'%s' is an invalid IP address." msgstr "%s is nie 'n geldige gasheernaam nie." #: ../packages.py:256 #, fuzzy msgid "Invalid Key" msgstr "Ongeldige IP-string" #: ../packages.py:257 #, fuzzy msgid "The key you entered is invalid." msgstr "Die ingetikte waarde is nie 'n geldige syfer nie." #: ../packages.py:285 #, fuzzy msgid "_Skip" msgstr "Oorslaan" #: ../packages.py:317 ../packages.py:340 msgid "Warning! This is pre-release software!" msgstr "Waarskuwing! Hierdie is voorvrystelling-sagteware!" #: ../packages.py:318 #, fuzzy, python-format msgid "" "Thank you for downloading this pre-release of %s.\n" "\n" "This is not a final release and is not intended for use on production " "systems. The purpose of this release is to collect feedback from testers, " "and it is not suitable for day to day usage.\n" "\n" "To report feedback, please visit:\n" "\n" " %s\n" "\n" "and file a report against '%s'.\n" msgstr "" "Dankie dat jy hierdie voorvrystelling van %s afgelaai het.\n" "\n" "Dit is nie 'n finale uitgawe nie en is nie vir gebruik op produksierekenaars " "bedoel nie. Die doel van hierdie uitgawe is om terugvoer van toetsers te " "kry, en dis nie geskik vir alledaagse gebruik nie.\n" "\n" "Om terugvoer te gee, besoek gerus\n" "\n" " http://bugzilla.redhat.com/bugzilla\n" "\n" "en dien 'n verslag oor '%s' in.\n" #: ../packages.py:331 msgid "_Install anyway" msgstr "_Installeer in elk geval" #: ../partedUtils.py:205 ../textw/partition_text.py:570 msgid "Foreign" msgstr "Vreemde" #: ../partedUtils.py:305 #, python-format msgid "" "The device %s is LDL formatted instead of CDL formatted. LDL formatted " "DASDs are not supported for usage during an install of %s. If you wish to " "use this disk for installation, it must be re-initialized causing the loss " "of ALL DATA on this drive.\n" "\n" "Would you like to reformat this DASD using CDL format?" msgstr "" "Die toestel %s is LDL-geformateer in plaas van CDL-geformateer. LDL-" "geformateerde DASD's werk nie tydens installering van %s nie. As jy hierdie " "skyf vir installering wil gebruik, moet dit geherinisialiseer word, wat " "beteken dat ALLE DATA op hierdie aandrywer verlore sal gaan.\n" "\n" "Wil jy hierdie DASD in CDL-formaat herformateer?" #: ../partedUtils.py:335 #, fuzzy, python-format msgid "" "/dev/%s currently has a %s partition layout. To use this drive for the " "installation of %s, it must be re-initialized, causing the loss of ALL DATA " "on this drive.\n" "\n" "Would you like to re-initialize this drive?" msgstr "" "/dev/%s het tans 'n %s-partisie-uitleg. As jy hierdie skyf vir installering " "van %s wil gebruik, moet dit geherinisialiseer word, wat beteken dat ALLE " "DATA op hierdie aandrywer verlore sal gaan.\n" "\n" "Wil jy hierdie aandrywer nou formateer?" #: ../partedUtils.py:344 msgid "_Ignore drive" msgstr "_Ignoreer aandrywer" #: ../partedUtils.py:345 msgid "_Re-initialize drive" msgstr "" #: ../partedUtils.py:911 msgid "Initializing" msgstr "Inisialisering" #: ../partedUtils.py:912 #, python-format msgid "Please wait while formatting drive %s...\n" msgstr "Wag terwyl aandrywer %s geformateer word...\n" #: ../partedUtils.py:1076 #, python-format msgid "" "The partition table on device %s (%s) was unreadable. To create new " "partitions it must be initialized, causing the loss of ALL DATA on this " "drive.\n" "\n" "This operation will override any previous installation choices about which " "drives to ignore.\n" "\n" "Would you like to initialize this drive, erasing ALL DATA?" msgstr "" "Die partisietabel op toestel %s (%s) is onleesbaar. Om nuwe partisies te " "skep, moet dit geïnisialiseer word, wat beteken dat ALLE DATA op hierdie " "aandrywer verlore sal gaan.\n" "\n" "Hierdie operasie sal enige vorige installeringkeuse oor watter aandrywers " "geïgnoreer moet word, kanselleer.\n" "\n" "Wil jy hierdie aandrywer inisialiseer, en ALLE DATA uitwis?" #: ../partedUtils.py:1125 #, python-format msgid "" "The partition table on device %s was unreadable. To create new partitions it " "must be initialized, causing the loss of ALL DATA on this drive.\n" "\n" "This operation will override any previous installation choices about which " "drives to ignore.\n" "\n" "Would you like to initialize this drive, erasing ALL DATA?" msgstr "" "Die partisietabel op toestel %s is onleesbaar. Om nuwe partisies te skep, " "moet dit geïnisialiseer word, wat beteken dat ALLE DATA op hierdie aandrywer " "verlore sal gaan.\n" "\n" "Hierdie operasie sal enige vorige installeringkeuse oor watter aandrywers " "geïgnoreer moet word, kanselleer.\n" "\n" "Wil jy hierdie aandrywer inisialiseer, en ALLE DATA uitwis?" #: ../partedUtils.py:1168 #, python-format msgid "" "The drive /dev/%s has more than 15 partitions on it. The SCSI subsystem in " "the Linux kernel does not allow for more than 15 partitons at this time. " "You will not be able to make changes to the partitioning of this disk or use " "any partitions beyond /dev/%s15 in %s" msgstr "" #: ../partedUtils.py:1184 #, python-format msgid "" "The drive /dev/%s has more than 15 partitions on it. The SCSI subsystem in " "the Linux kernel does not allow for more than 15 partitions at this time. " "You will not be able to make changes to the partitioning of this disk or use " "any partitions beyond /dev/%s15 in %s" msgstr "" #: ../partedUtils.py:1276 msgid "No Drives Found" msgstr "Geen aandrywers gevind nie" #: ../partedUtils.py:1277 msgid "" "An error has occurred - no valid devices were found on which to create new " "file systems. Please check your hardware for the cause of this problem." msgstr "" "Daar't fout gegaan - geen geldige toestelle is gevind waarop nuwe " "lêerstelsels geskep kon word nie. Kontroleer jou hardeware vir die oorsaak " "van hierdie probleem." #: ../partIntfHelpers.py:35 msgid "Please enter a volume group name." msgstr "Tik 'n volumegroep-naam in." #: ../partIntfHelpers.py:39 msgid "Volume Group Names must be less than 128 characters" msgstr "Volumegroepname moet minder as 128 karakters lank wees" #: ../partIntfHelpers.py:42 #, python-format msgid "Error - the volume group name %s is not valid." msgstr "Fout - die volumegroep-naam %s is nie geldig nie." #: ../partIntfHelpers.py:47 msgid "" "Error - the volume group name contains illegal characters or spaces. " "Acceptable characters are letters, digits, '.' or '_'." msgstr "" "Fout - die volumegroep-naam bevat onwettige karakters of spasies. " "Aanvaarbare karakters is letters, syfers, '.' of '_'." #: ../partIntfHelpers.py:57 msgid "Please enter a logical volume name." msgstr "Tik 'n logiesevolumenaam in." #: ../partIntfHelpers.py:61 msgid "Logical Volume Names must be less than 128 characters" msgstr "Logiesevolumename moet minder as 128 karakters lank wees" #: ../partIntfHelpers.py:65 #, python-format msgid "Error - the logical volume name %s is not valid." msgstr "Fout - die logiesevolumenaam %s is nie geldig nie." #: ../partIntfHelpers.py:71 msgid "" "Error - the logical volume name contains illegal characters or spaces. " "Acceptable characters are letters, digits, '.' or '_'." msgstr "" "Fout - die logiesevolumenaam bevat onwettige karakters of spasies. " "Aanvaarbare karakters is letters, syfers, '.' of '_'." #: ../partIntfHelpers.py:95 #, fuzzy, python-format msgid "" "The mount point %s is invalid. Mount points must start with '/' and cannot " "end with '/', and must contain printable characters and no spaces." msgstr "" "Die hegpunt is ongeldige. Hegpunte moet met '/' begin en kan nie eindig met " "'/' nie, en moet drukbare karakters en geen spasies nie bevat." #: ../partIntfHelpers.py:102 msgid "Please specify a mount point for this partition." msgstr "Spesifiseer 'n hegpunt vir hierdie partisie." #: ../partIntfHelpers.py:112 #, python-format msgid "This partition is part of the RAID device /dev/md%s." msgstr "Hierdie partisie is deel van die RAID-toestel /dev/md%s." #: ../partIntfHelpers.py:115 msgid "This partition is part of a RAID device." msgstr "Hierdie partisie is deel van 'n RAID-toestel." #: ../partIntfHelpers.py:120 #, python-format msgid "This partition is part of the LVM volume group '%s'." msgstr "Hierdie partisie is deel van die LVM-volumegroep '%s'." #: ../partIntfHelpers.py:123 msgid "This partition is part of a LVM volume group." msgstr "Hierdie partisie is deel van 'n LVM-volumegroep." #: ../partIntfHelpers.py:138 ../partIntfHelpers.py:146 #: ../partIntfHelpers.py:153 ../partIntfHelpers.py:163 #: ../partIntfHelpers.py:187 msgid "Unable To Delete" msgstr "Kon nie skrap nie" #: ../partIntfHelpers.py:139 msgid "You must first select a partition to delete." msgstr "Jy moet eers 'n partisie kies om te skrap." #: ../partIntfHelpers.py:147 msgid "You cannot delete free space." msgstr "Jy kan nie oop spasie skrap nie." #: ../partIntfHelpers.py:154 msgid "You cannot delete a partition of a LDL formatted DASD." msgstr "Jy kan nie 'n partisie van 'n LDL-geformateerde DASD skrap nie." #: ../partIntfHelpers.py:164 #, python-format msgid "" "You cannot delete this partition, as it is an extended partition which " "contains %s" msgstr "" "Jy kan nie hierdie partisie skrap nie aangesien dit 'n uitbreipartisie is " "wat %s bevat" #: ../partIntfHelpers.py:182 ../iw/raid_dialog_gui.py:554 msgid "This partition is holding the data for the hard drive install." msgstr "Hierdie partisie bevat die data vir die hardeskyfinstallering." #: ../partIntfHelpers.py:188 msgid "" "You cannot delete this partition:\n" "\n" msgstr "" "Jy kan nie hierdie partisie skrap nie:\n" "\n" #: ../partIntfHelpers.py:233 ../partIntfHelpers.py:528 #: ../iw/lvm_dialog_gui.py:755 msgid "Confirm Delete" msgstr "Bevestig skrap" #: ../partIntfHelpers.py:234 #, python-format msgid "You are about to delete all partitions on the device '/dev/%s'." msgstr "Jy is op die punt om alle partisies op die toestel '/dev/%s' te skrap." #: ../partIntfHelpers.py:237 ../partIntfHelpers.py:529 #: ../iw/lvm_dialog_gui.py:758 ../iw/lvm_dialog_gui.py:1107 #: ../iw/osbootwidget.py:104 ../iw/partition_gui.py:1353 msgid "_Delete" msgstr "_Skrap" #: ../partIntfHelpers.py:295 msgid "Notice" msgstr "Let wel" #: ../partIntfHelpers.py:296 #, python-format msgid "" "The following partitions were not deleted because they are in use:\n" "\n" "%s" msgstr "" "Die volgende partisies is nie geskrap nie omdat hulle in gebruik was:\n" "\n" "%s" #: ../partIntfHelpers.py:312 ../partIntfHelpers.py:325 #: ../partIntfHelpers.py:351 ../partIntfHelpers.py:362 msgid "Unable To Edit" msgstr "Kon nie redigeer nie" #: ../partIntfHelpers.py:313 msgid "You must select a partition to edit" msgstr "Jy moet eers 'n partisie kies om te redigeer" #: ../partIntfHelpers.py:325 ../partIntfHelpers.py:363 msgid "" "You cannot edit this partition:\n" "\n" msgstr "" "Jy kan nie hierdie partisie redigeer nie:\n" "\n" #: ../partIntfHelpers.py:352 #, python-format msgid "" "You cannot edit this partition, as it is an extended partition which " "contains %s" msgstr "" "Jy kan nie hierdie partisie redigeer nie aangesien dit 'n uitbreipartisie is " "wat %s bevat" #: ../partIntfHelpers.py:384 msgid "Format as Swap?" msgstr "Formateer as ruilruimte?" #: ../partIntfHelpers.py:385 #, python-format msgid "" "/dev/%s has a partition type of 0x82 (Linux swap) but does not appear to be " "formatted as a Linux swap partition.\n" "\n" "Would you like to format this partition as a swap partition?" msgstr "" "/dev/%s se partisiesoort is 0x82 (Linux ruilruimte) maar dit lyk nie of dit " "as 'n Linux-ruilpartisie geformateer is nie.\n" "\n" "Wil jy hierdie partisie as 'n ruilpartisie formateer?" #: ../partIntfHelpers.py:405 #, fuzzy, python-format msgid "You need to select at least one hard drive to install %s." msgstr "" "Jy moet ten minste een hardeskyf kies waarop %s geïnstalleer gaan word." #: ../partIntfHelpers.py:410 msgid "" "You have chosen to use a pre-existing partition for this installation " "without formatting it. We recommend that you format this partition to make " "sure files from a previous operating system installation do not cause " "problems with this installation of Linux. However, if this partition " "contains files that you need to keep, such as home directories, then " "continue without formatting this partition." msgstr "" "Jy't gekies om 'n reeds bestaande partisie vir hierdie installering te " "gebruik sonder om dit te formateer. Ons raai jou aan om hierdie partisie te " "formateer om te verseker dat lêers uit 'n vorige bedryfstelsel-installasie " "nie probleme vir hierdie installasie van Linux veroorsaak nie. As die " "partisie egter lêers bevat wat jy wil behou, soos tuisgidse, moet jy " "voortgaan sonder om hierdie partisie te formateer." #: ../partIntfHelpers.py:418 msgid "Format?" msgstr "Formateer?" #: ../partIntfHelpers.py:418 ../iw/partition_gui.py:1009 msgid "_Modify Partition" msgstr "_Wysig partisie" #: ../partIntfHelpers.py:418 msgid "Do _Not Format" msgstr "Mo_nie formateer nie" #: ../partIntfHelpers.py:426 msgid "Error with Partitioning" msgstr "Fout met partisiëring" #: ../partIntfHelpers.py:427 #, python-format msgid "" "The following critical errors exist with your requested partitioning scheme. " "These errors must be corrected prior to continuing with your install of %s.\n" "\n" "%s" msgstr "" "Die volgende kritieke foute bestaan in jou gekose partisieerskema. Hierdie " "foute moet reggemaak word voor jy met die installering van %s kan " "voortgaan.\n" "\n" "%s" #: ../partIntfHelpers.py:441 msgid "Partitioning Warning" msgstr "Partisieer-waarskuwing" #: ../partIntfHelpers.py:442 #, python-format msgid "" "The following warnings exist with your requested partition scheme.\n" "\n" "%s\n" "\n" "Would you like to continue with your requested partitioning scheme?" msgstr "" "Die volgende waarskuwings foute bestaan in jou gekose partisieerskema.\n" "\n" "%s\n" "\n" "Wil jy voortgaan met jou gekose partisieerskema?" #: ../partIntfHelpers.py:456 ../iw/partition_gui.py:664 msgid "" "The following pre-existing partitions have been selected to be formatted, " "destroying all data." msgstr "" "Die volgende reeds bestaande partisies is gekies om geformateer te word, wat " "alle data sal vernietig." #: ../partIntfHelpers.py:459 msgid "" "Select 'Yes' to continue and format these partitions, or 'No' to go back and " "change these settings." msgstr "" "Kies 'Ja' om voort te gaan en hierdie partisies te formateer, of 'Nee' om " "terug te gaan en hierdie opstelling te wysig." #: ../partIntfHelpers.py:465 msgid "Format Warning" msgstr "Formateer-waarskuwing" #: ../partIntfHelpers.py:513 #, python-format msgid "" "You are about to delete the volume group \"%s\".\n" "\n" "ALL logical volumes in this volume group will be lost!" msgstr "" "Jy is op die punt om die volumegroep \"%s\"te skrap.\n" "\n" "ALLE logiese volumes in hierdie volumegroep sal verlore gaan!" #: ../partIntfHelpers.py:517 #, python-format msgid "You are about to delete the logical volume \"%s\"." msgstr "Jy is op die punt om die logiese volume \"%s\"te skrap." #: ../partIntfHelpers.py:520 msgid "You are about to delete a RAID device." msgstr "Jy is op die punt om 'n RAID-toestel te skrap." #: ../partIntfHelpers.py:523 #, python-format msgid "You are about to delete the /dev/%s partition." msgstr "Jy is op die punt om die /dev/%s-partisie te skrap." #: ../partIntfHelpers.py:526 msgid "The partition you selected will be deleted." msgstr "Die partisie wat jy gekies het, sal geskrap word." #: ../partIntfHelpers.py:536 msgid "Confirm Reset" msgstr "Bevestig terugstel" #: ../partIntfHelpers.py:537 msgid "" "Are you sure you want to reset the partition table to its original state?" msgstr "" "Is jy seker jy wil die partisietabel na sy oorspronklike staat terugstel?" #: ../partitioning.py:61 msgid "Installation cannot continue." msgstr "Installering kan nie voortgaan nie." #: ../partitioning.py:62 msgid "" "The partitioning options you have chosen have already been activated. You " "can no longer return to the disk editing screen. Would you like to continue " "with the installation process?" msgstr "" "Die partisieeropsies wat jy gekies het, is reeds uitgevoer. Jy kan nie meer " "na die skyfredigeer-skerm terugkeer nie. Wil jy voortgaan met die " "installeerproses?" #: ../partitioning.py:92 msgid "Low Memory" msgstr "Min geheue" #: ../partitioning.py:93 msgid "" "As you don't have much memory in this machine, we need to turn on swap space " "immediately. To do this we'll have to write your new partition table to the " "disk immediately. Is that OK?" msgstr "" "As jy nie veel geheue in hierdie rekenaar het nie, moet jy die ruilruimte " "onmiddellik aanskakel. Om dit te doen, moet jy dadelik 'n nuwe partisietabel " "op die skyf skryf. Is dit goed so?" #: ../partitions.py:816 #, python-format msgid "" "You have not defined a root partition (/), which is required for " "installation of %s to continue." msgstr "" "Jy het nie 'n wortelpartisie (/) gedefinieer nie, en dit word vereis voor " "die installering van %s kan voortgaan." #: ../partitions.py:821 #, python-format msgid "" "Your root partition is less than 250 megabytes which is usually too small to " "install %s." msgstr "" "Jou wortelpartisie is minder as 250 megagreep groot, wat gewoonlik te klein " "is om %s te installeer." #: ../partitions.py:840 msgid "" "Your boot partition isn't on one of the first four partitions and thus won't " "be bootable." msgstr "" #: ../partitions.py:847 msgid "" "You must create a /boot/efi partition of type FAT and a size of 50 megabytes." msgstr "" "Jy moet 'n /boot/efi-partisie van die FAT-soort skep met 'n grootte van 50 " "megagreep." #: ../partitions.py:867 #, fuzzy msgid "You must create an Apple Bootstrap partition." msgstr "Jy moet 'n PPC PReP-selflaai-partisie skep." #: ../partitions.py:889 msgid "You must create a PPC PReP Boot partition." msgstr "Jy moet 'n PPC PReP-selflaai-partisie skep." #: ../partitions.py:897 ../partitions.py:908 #, python-format msgid "" "Your %s partition is less than %s megabytes which is lower than recommended " "for a normal %s install." msgstr "" "Jou %s-partisie is minder as %s megagreep groot, wat minder is as die " "aanbevole vir 'n normale %s-installering." #: ../partitions.py:942 msgid "" "Installing on a USB device. This may or may not produce a working system." msgstr "" #: ../partitions.py:945 msgid "" "Installing on a FireWire device. This may or may not produce a working " "system." msgstr "" #: ../partitions.py:954 ../partRequests.py:679 msgid "Bootable partitions can only be on RAID1 devices." msgstr "Selflaaibare partisies kan net op RAID1-toestelle woon." #: ../partitions.py:961 msgid "Bootable partitions cannot be on a logical volume." msgstr "Selflaaibare partisies kan nie op 'n logiese volume woon nie." #: ../partitions.py:986 msgid "" "You have not specified a swap partition. Although not strictly required in " "all cases, it will significantly improve performance for most installations." msgstr "" "Jy het nie 'n ruilpartisie gespesifiseer nie. Alhoewel dit nie in alle " "gevalle nodig is nie, sal dit die werking van die meeste soorte " "installerings wesenlik verbeter." #: ../partitions.py:993 #, python-format msgid "" "You have specified more than 32 swap devices. The kernel for %s only " "supports 32 swap devices." msgstr "" "Jy het meer as 32 ruiltoestelle gespesifiseer. Die kern vir %s werk net met " "32 ruiltoestelle." #: ../partitions.py:1004 #, python-format msgid "" "You have allocated less swap space (%dM) than available RAM (%dM) on your " "system. This could negatively impact performance." msgstr "" "Jy het minder ruilruimte (%dM) as die beskikbare geheue (%dM) op jou " "rekenaar toegeken. Dit kan werking benadeel." #: ../partitions.py:1304 msgid "the partition in use by the installer." msgstr "die partisie wat deur die installeerder gebruik word." #: ../partitions.py:1307 msgid "a partition which is a member of a RAID array." msgstr "'n partisie wat lid van 'n RAID-reeks is." #: ../partitions.py:1310 msgid "a partition which is a member of a LVM Volume Group." msgstr "'n partisie wat lid van 'n LVM-volumegroep is." #: ../partRequests.py:249 #, python-format msgid "" "This mount point is invalid. The %s directory must be on the / file system." msgstr "" "Hierdie hegpunt is ongeldig. Die %s-gids moet op die /-lêerstelsel wees." #: ../partRequests.py:252 #, python-format msgid "" "The mount point %s cannot be used. It must be a symbolic link for proper " "system operation. Please select a different mount point." msgstr "" "Die hegpunt %s kan nie gebruik word nie. Dit moet 'n simboliese skakel vir " "behoorlike stelselwerking wees. Kies 'n ander hegpunt." #: ../partRequests.py:259 msgid "This mount point must be on a linux file system." msgstr "Hierdie hegpunt moet op 'n linux-lêerstelsel wees." #: ../partRequests.py:280 #, python-format msgid "" "The mount point \"%s\" is already in use, please choose a different mount " "point." msgstr "Die hegpunt \"%s\" word reeds gebruik; kies 'n ander hegpunt." #: ../partRequests.py:294 #, python-format msgid "" "The size of the %s partition (%10.2f MB) exceeds the maximum size of %10.2f " "MB." msgstr "" "Die grootte van die %s-partisie (%10.2f megagreep) is meer as die maksimum " "grootte van %10.2f megagreep." #: ../partRequests.py:490 #, python-format msgid "" "The size of the requested partition (size = %s MB) exceeds the maximum size " "of %s MB." msgstr "" "Die grootte van die gekose partisie (grootte = %s megagreep) is meer as die " "maksimum grootte van %s megagreep." #: ../partRequests.py:495 #, python-format msgid "The size of the requested partition is negative! (size = %s MB)" msgstr "" "Die grootte van die gekose partisie is negatief! (grootte = %s megagreep)" #: ../partRequests.py:499 msgid "Partitions can't start below the first cylinder." msgstr "Partisies kan nie onderkant die eerste silinder begin nie." #: ../partRequests.py:502 msgid "Partitions can't end on a negative cylinder." msgstr "Partisies kan nie op 'n negatiewe silinder eindig nie." #: ../partRequests.py:671 msgid "No members in RAID request, or not RAID level specified." msgstr "Geen lede in RAID-versoek of RAID-vlak gespesifiseer nie." #: ../partRequests.py:683 #, python-format msgid "A RAID device of type %s requires at least %s members." msgstr "'n RAID-toestel van die %s-soort vereis ten minste %s lede." #: ../partRequests.py:692 #, python-format msgid "" "This RAID device can have a maximum of %s spares. To have more spares you " "will need to add members to the RAID device." msgstr "" "Hierdie RAID-toestel kan 'n maksimum van %s spaarkomponente hê. Om meer " "spaarkomponente te hê, moet jy lede by die RAID-toestel voeg." #: ../partRequests.py:926 msgid "" "Logical volume size must be larger than the volume group's physical extent " "size." msgstr "" #: ../rescue.py:146 msgid "Starting Interface" msgstr "Begin koppelvlak" #: ../rescue.py:147 #, python-format msgid "Attempting to start %s" msgstr "Probeer om %s te begin" #: ../rescue.py:189 msgid "When finished please exit from the shell and your system will reboot." msgstr "" "Wanneer jy klaar is, sluit die dop af, en jou rekenaar sal herselflaai." #: ../rescue.py:215 msgid "Setup Networking" msgstr "Stel netwerking op" #: ../rescue.py:216 msgid "Do you want to start the network interfaces on this system?" msgstr "Wil jy die netwerkkoppelvlak op hierdie rekenaar laat begin?" #: ../rescue.py:256 ../text.py:598 msgid "Cancelled" msgstr "Gekanselleer" #: ../rescue.py:257 ../text.py:599 msgid "I can't go to the previous step from here. You will have to try again." msgstr "" "Ek kan nie van hier af na die vorige stap gaan nie. Jy sal maar weer moet " "probeer." #: ../rescue.py:289 ../rescue.py:356 ../rescue.py:364 ../rescue.py:445 msgid "Rescue" msgstr "Redding" #: ../rescue.py:290 #, python-format msgid "" "The rescue environment will now attempt to find your Linux installation and " "mount it under the directory %s. You can then make any changes required to " "your system. If you want to proceed with this step choose 'Continue'. You " "can also choose to mount your file systems read-only instead of read-write " "by choosing 'Read-Only'.\n" "\n" "If for some reason this process fails you can choose 'Skip' and this step " "will be skipped and you will go directly to a command shell.\n" "\n" msgstr "" "Die reddingomgewing sal nou probeer om jou Linux-installasie te vind en dit " "onder die gids %s aan te heg. Jy kan dan enige veranderinge maak wat deur " "jou rekenaar vereis word. As jy met hierdie stap wil voortgaan, kies 'Gaan " "voort'. Jy kan ook kies om jou lêerstelsels as leesalleen te heg in plaas " "van lees-en-skryf, deur 'Leesalleen' te kies.\n" "\n" "As hierdie proses om die een of ander rede misluk, kan jy 'Oorslaan' kies en " "hierdie stap sal oorgeslaan word, en jy sal direk na die beveldop gaan.\n" "\n" #: ../rescue.py:300 ../iw/partition_gui.py:567 ../textw/network_text.py:55 #: ../loader2/cdinstall.c:113 ../loader2/cdinstall.c:121 #: ../loader2/driverdisk.c:487 msgid "Continue" msgstr "Gaan voort" #: ../rescue.py:300 ../rescue.py:305 msgid "Read-Only" msgstr "Leesalleen" #: ../rescue.py:331 msgid "System to Rescue" msgstr "Rekenaar om te red" #: ../rescue.py:332 msgid "What partition holds the root partition of your installation?" msgstr "Watter partisie het die wortelpartisie van jou installasie op?" #: ../rescue.py:334 ../rescue.py:338 ../text.py:572 ../text.py:574 msgid "Exit" msgstr "Sluit af" #: ../rescue.py:357 msgid "" "Your system had dirty file systems which you chose not to mount. Press " "return to get a shell from which you can fsck and mount your partitions. " "The system will reboot automatically when you exit from the shell." msgstr "" "Jou rekenaar het vuil lêerstelsels wat jy gekies het om nie te heg nie. Druk " "return om 'n dop te kry van waar jy kan fsck en jou partisies kan heg. Die " "rekenaar sal outomaties herselflaai wanneer jy die dop afsluit." #: ../rescue.py:365 #, python-format msgid "" "Your system has been mounted under %s.\n" "\n" "Press to get a shell. If you would like to make your system the " "root environment, run the command:\n" "\n" "\tchroot %s\n" "\n" "The system will reboot automatically when you exit from the shell." msgstr "" "Jou rekenaar is onder %s geheg.\n" "\n" "Druk om 'n dop te kry. As jy jou rekenaar die wortelomgewing wil " "maak, laat loop die bevel\n" "\n" "\tchroot %s\n" "\n" "Die rekenaar sal outomaties herselflaai wanneer jy die dop afsluit." #: ../rescue.py:446 #, python-format msgid "" "An error occurred trying to mount some or all of your system. Some of it may " "be mounted under %s.\n" "\n" "Press to get a shell. The system will reboot automatically when you " "exit from the shell." msgstr "" "Daar was fout met die poging om 'n deel van of jou hele rekenaar te heg. " "Dele daarvan is dalk onder %s geheg.\n" "\n" "Druk om 'n dop te kry. Die rekenaar sal outomaties herselflaai " "wanneer jy die dop afsluit." #: ../rescue.py:452 msgid "Rescue Mode" msgstr "Reddingmodus" #: ../rescue.py:453 msgid "" "You don't have any Linux partitions. Press return to get a shell. The system " "will reboot automatically when you exit from the shell." msgstr "" "Jy het nie enige Linux-partisies nie. Druk return om 'n dop te kry. Die " "rekenaar sal outomaties herselflaai wanneer jy die dop afsluit." #: ../rescue.py:466 #, python-format msgid "Your system is mounted under the %s directory." msgstr "Jou rekenaar is onder die %s-gids geheg." #: ../text.py:153 ../text.py:168 msgid "Save" msgstr "Stoor" #: ../text.py:156 ../text.py:170 #, fuzzy msgid "Remote" msgstr "Verwyder" #: ../text.py:158 ../text.py:166 msgid "Debug" msgstr "Ontfout" #: ../text.py:162 msgid "Exception Occurred" msgstr "Uitsondering plaasgevind" #: ../text.py:191 msgid "Save to Remote Host" msgstr "" #: ../text.py:194 #, fuzzy msgid "Host" msgstr "Gasheernaam" #: ../text.py:196 msgid "Remote path" msgstr "" #: ../text.py:198 msgid "User name" msgstr "Gebruikernaam" #: ../text.py:200 msgid "Password" msgstr "Wagwoord" #: ../text.py:257 msgid "Help not available" msgstr "Hulp nie beskikbaar nie" #: ../text.py:258 msgid "No help is available for this step of the install." msgstr "Geen hulp is vir hierdie stap van die installering beskikbaar nie." #: ../text.py:365 #, fuzzy, python-format msgid "Please enter your %(instkey)s" msgstr "Tik 'n volumegroep-naam in." #: ../text.py:382 tmp/instkey.glade.h:6 #, no-c-format, python-format msgid "Skip entering %(instkey)s" msgstr "" #: ../text.py:414 msgid "Save Crash Dump" msgstr "Stoor omvalstorting" #: ../text.py:469 ../loader2/lang.c:55 ../loader2/loader.c:153 #, c-format, python-format msgid "Welcome to %s" msgstr "Welkom by %s" #: ../text.py:472 msgid "" " for help | between elements | selects | next screen" msgstr "" " vir hulp | wissel elemente | kies | volgende skerm" #: ../text.py:474 msgid "" " / between elements | selects | next " "screen" msgstr "" " / wissel elemente | kies | volgende skerm" #: ../upgrade.py:52 msgid "Proceed with upgrade?" msgstr "Gaan voort met opgradeer?" #: ../upgrade.py:53 msgid "" "The file systems of the Linux installation you have chosen to upgrade have " "already been mounted. You cannot go back past this point. \n" "\n" msgstr "" "Die lêerstelsel van die Linux-installasie wat jy wil opgradeer, is reeds " "geheg. Jy kan na hierdie punt nie weer teruggaan nie. \n" "\n" #: ../upgrade.py:57 msgid "Would you like to continue with the upgrade?" msgstr "Wil jy voortgaan met die opgradering?" #: ../upgrade.py:93 msgid "Searching" msgstr "Deursoek" #: ../upgrade.py:94 #, python-format msgid "Searching for %s installations..." msgstr "Soek tans vir %s-installasies..." #: ../upgrade.py:149 ../upgrade.py:157 msgid "Dirty File Systems" msgstr "Vuil lêerstelsels" #: ../upgrade.py:150 #, python-format msgid "" "The following file systems for your Linux system were not unmounted " "cleanly. Please boot your Linux installation, let the file systems be " "checked and shut down cleanly to upgrade.\n" "%s" msgstr "" "Die volgende lêerstelsels vir jou Linux-stelsel kon nie skoon geheg word " "nie. Laat jou Linux-installasie selflaai, laat die lêerstelsel gekontroleer " "word, en skakel skoon af voor jy opgradeer.\n" "%s" #: ../upgrade.py:158 #, python-format msgid "" "The following file systems for your Linux system were not unmounted " "cleanly. Would you like to mount them anyway?\n" "%s" msgstr "" "Die volgende lêerstelsels vir jou Linux-stelsel kon nie skoon geheg word " "nie. Wil jy hulle in elk geval heg?\n" "%s" #: ../upgrade.py:295 ../upgrade.py:301 msgid "Mount failed" msgstr "Heg het misluk" #: ../upgrade.py:296 msgid "" "One or more of the file systems listed in the /etc/fstab on your Linux " "system cannot be mounted. Please fix this problem and try to upgrade again." msgstr "" "Een of meer van die lêerstelsels gelys in die /etc/fstab op jou Linux-" "stelsel kan nie geheg word nie. Los hierdie probleem op en probeer weer " "opgradeer." #: ../upgrade.py:302 msgid "" "One or more of the file systems listed in the /etc/fstab of your Linux " "system are inconsistent and cannot be mounted. Please fix this problem and " "try to upgrade again." msgstr "" "Een of meer van die lêerstelsels gelys in die /etc/fstab op jou Linux-" "stelsel is inkonsekwent en kan nie geheg word nie. Los hierdie probleem op " "en probeer weer opgradeer." #: ../upgrade.py:319 msgid "" "The following files are absolute symbolic links, which we do not support " "during an upgrade. Please change them to relative symbolic links and restart " "the upgrade.\n" "\n" msgstr "" "Die volgende lêers is absolute simboliese skakels, wat nie gedurende die " "opgradering sal werk nie. Verander hulle na relatiewe simboliese skakels, en " "begin van voor af opgradeer.\n" "\n" #: ../upgrade.py:325 msgid "Absolute Symlinks" msgstr "Absolute simskakels" #: ../upgrade.py:336 msgid "" "The following are directories which should instead be symbolic links, which " "will cause problems with the upgrade. Please return them to their original " "state as symbolic links and restart the upgrade.\n" "\n" msgstr "" "Die volgende is gidse wat eerder simboliese skakels moes wees, wat probleme " "tydens die opgradering kan veroorsaak. Verander hulle na hul oorspronklike " "staat as simboliese skakels, en begin van voor af opgradeer.\n" "\n" #: ../upgrade.py:342 msgid "Invalid Directories" msgstr "Ongeldige gidse" #: ../upgrade.py:349 #, python-format msgid "%s not found" msgstr "kon nie %s vind nie" #: ../urlinstall.py:37 msgid "Connecting..." msgstr "Verbind..." #: ../urlinstall.py:76 #, fuzzy, python-format msgid "" "The file %s cannot be opened. This is due to a missing file or perhaps a " "corrupt package. Please verify your mirror contains all required packages, " "and try using a different one.\n" "\n" "If you exit, your system will be left in an inconsistent state that will " "likely require reinstallation.\n" "\n" msgstr "" "Die pakket%s-%s-%s kan nie geopen word nie. Dis te wyte aan 'n vermiste lêer " "of dalk 'n korrupte pakket. As jy van CD-media af installeer, beteken dit " "gewoonlik dat die CD-media korrup is, of dat die CD-aandrywer nie die media " "kan lees nie.\n" "\n" "Druk om weer te probeer." #: ../vnc.py:49 msgid "Unable to Start X" msgstr "Kon nie Start X nie" #: ../vnc.py:50 msgid "" "X was unable to start on your machine. Would you like to start VNC to " "connect to this computer from another computer and perform a graphical " "install or continue with a text mode install?" msgstr "" "X kon nie op jou rekenaar begin nie. Wil jy die VNC laat begin om van 'n " "ander rekenaar af aan hierdie rekenaar te koppel en 'n grafiese installering " "te doen, of wil jy voortgaan in teksmodus?" #: ../vnc.py:57 ../vnc.py:60 msgid "Use text mode" msgstr "Gebruik teksmodus" #: ../vnc.py:58 msgid "Start VNC" msgstr "Begin VNC" #: ../vnc.py:68 msgid "VNC Configuration" msgstr "VNC-instelling" #: ../vnc.py:72 msgid "No password" msgstr "Geen wagwoord nie" #: ../vnc.py:75 msgid "" "A password will prevent unauthorized listeners connecting and monitoring " "your installation progress. Please enter a password to be used for the " "installation" msgstr "" "'n Wagwoord sal ongemagtigde inluisteraars verhoed om te koppel en jou " "installeerproses te monitor. Tik 'n wagwoord in wat vir die installering " "gebruik sal word" #: ../vnc.py:83 ../textw/userauth_text.py:42 ../loader2/urls.c:460 msgid "Password:" msgstr "Wagwoord:" #: ../vnc.py:84 ../textw/userauth_text.py:43 msgid "Password (confirm):" msgstr "Wagwoord (bevestig):" #: ../vnc.py:106 ../textw/userauth_text.py:64 msgid "Password Mismatch" msgstr "Wagwoorde pas nie" #: ../vnc.py:107 ../textw/userauth_text.py:65 msgid "The passwords you entered were different. Please try again." msgstr "Die wagwoorde wat jy ingetik het, verskil. Probeer weer." #: ../vnc.py:112 ../textw/userauth_text.py:59 msgid "Password Length" msgstr "Wagwoordlengte" #: ../vnc.py:113 msgid "The password must be at least six characters long." msgstr "Die wagwoord moet ten minste ses karakters lank wees." #: ../vnc.py:143 #, fuzzy msgid "VNC Password Error" msgstr "Geen wagwoord nie" #: ../vnc.py:144 msgid "" "You need to specify a vnc password of at least 6 characters long.\n" "\n" "Press to reboot your system.\n" msgstr "" #: ../vnc.py:189 msgid "Starting VNC..." msgstr "Begin tans VNC..." #: ../vnc.py:245 #, python-format msgid "%s %s installation on host %s" msgstr "%s %s installering op gasheer %s" #: ../vnc.py:247 #, python-format msgid "%s %s installation" msgstr "%s %s installering" #: ../vnc.py:267 msgid "Unable to set vnc password - using no password!" msgstr "Kon nie vnc-wagwoord opstel nie - gebruik geen wagwoord nie!" #: ../vnc.py:268 msgid "Make sure your password is at least 6 characters in length." msgstr "Maak seker jou wagwoord is ten minste 6 karakter lank." #: ../vnc.py:291 msgid "" "\n" "\n" "WARNING!!! VNC server running with NO PASSWORD!\n" "You can use the vncpassword= boot option\n" "if you would like to secure the server.\n" "\n" msgstr "" "\n" "\n" "WAARSKUWING!!! VNC-bediener loop tans SONDER WAGWOORD!\n" "Jy kan die selflaaiopsie vncpassword=\n" "gebruik om die bediener te beveilig.\n" "\n" #: ../vnc.py:295 msgid "The VNC server is now running." msgstr "Die VNC-bediener loop tans." #: ../vnc.py:298 #, python-format msgid "Attempting to connect to vnc client on host %s..." msgstr "Probeer tans om aan vnc-kliënt op gasheer %s te koppel..." #: ../vnc.py:311 msgid "Connected!" msgstr "Gekoppel!" #: ../vnc.py:316 msgid "Giving up attempting to connect after 50 tries!\n" msgstr "Gee maar op om te koppel, na 50 probeerslae!\n" #: ../vnc.py:318 #, python-format msgid "Please manually connect your vnc client to %s to begin the install." msgstr "Koppel jou vnc-kliënt handmatig aan %s om die installering te begin." #: ../vnc.py:320 msgid "Please manually connect your vnc client to begin the install." msgstr "Koppel jou vnc-kliënt handmatig om die installering te begin." #: ../vnc.py:324 msgid "Will try to connect again in 15 seconds..." msgstr "Sal weer probeer koppel na 15 sekondes..." #: ../vnc.py:332 #, python-format msgid "Please connect to %s to begin the install..." msgstr "Koppel aan %s om die installering te begin..." #: ../vnc.py:334 msgid "Please connect to begin the install..." msgstr "Koppel om die installering te begin..." #: ../yuminstall.py:62 #, python-format msgid "%s MB" msgstr "%s megagreep" #: ../yuminstall.py:65 #, python-format msgid "%s KB" msgstr "%s kilogreep" #: ../yuminstall.py:68 #, python-format msgid "%s Byte" msgstr "%s greep" #: ../yuminstall.py:70 #, python-format msgid "%s Bytes" msgstr "%s grepe" #: ../yuminstall.py:117 msgid "Processing" msgstr "Verwerking" #: ../yuminstall.py:118 #, fuzzy msgid "Preparing transaction from installation source..." msgstr "Maak gereed om te installeer..." #: ../yuminstall.py:148 #, fuzzy, python-format msgid "Installing %s (%s)\n" msgstr "_Installeer %s" #: ../yuminstall.py:185 #, python-format msgid "%s of %s packages completed" msgstr "" #: ../yuminstall.py:195 msgid "Finishing upgrade" msgstr "" #: ../yuminstall.py:196 #, fuzzy msgid "Finishing upgrade process. This may take a little while..." msgstr "Begin installeerproses, dit mag 'n hele paar minute duur..." #: ../yuminstall.py:445 ../yuminstall.py:642 ../yuminstall.py:793 #: ../yuminstall.py:796 ../yuminstall.py:1012 ../yuminstall.py:1015 msgid "Re_boot" msgstr "Her_selflaai" #: ../yuminstall.py:598 ../yuminstall.py:599 msgid "file conflicts" msgstr "" #: ../yuminstall.py:600 #, fuzzy msgid "older package(s)" msgstr "Opsionele pakkette" #: ../yuminstall.py:601 msgid "insufficient disk space" msgstr "" #: ../yuminstall.py:602 msgid "insufficient disk inodes" msgstr "" #: ../yuminstall.py:603 #, fuzzy msgid "package conflicts" msgstr "Pakket-verstek" #: ../yuminstall.py:604 msgid "package already installed" msgstr "" #: ../yuminstall.py:605 #, fuzzy msgid "required package" msgstr "Oop spasie" #: ../yuminstall.py:606 msgid "package for incorrect arch" msgstr "" #: ../yuminstall.py:607 msgid "package for incorrect os" msgstr "" #: ../yuminstall.py:621 msgid "You need more space on the following file systems:\n" msgstr "" #: ../yuminstall.py:637 #, fuzzy msgid "Error running transaction" msgstr "Berei tans RPM-transaksie voor..." #: ../yuminstall.py:638 #, fuzzy, python-format msgid "" "There was an error running your transaction, for the following reason(s): %s" msgstr "" "Die gasheer \"%s\" is nie geldig nie, om die volgende rede:\n" "\n" "%s" #: ../yuminstall.py:733 #, fuzzy msgid "Retrieving installation information..." msgstr "Lees tans pakketinligting..." #: ../yuminstall.py:735 #, fuzzy, python-format msgid "Retrieving installation information for %s..." msgstr "Lees tans pakketinligting..." #: ../yuminstall.py:763 ../yuminstall.py:1020 #, fuzzy, python-format msgid "" "Unable to read package metadata. This may be due to a missing repodata " "directory. Please ensure that your install tree has been correctly " "generated. %s" msgstr "" "Die comps-lêer in jou installeerboom kort kritieke groepe. Verseker dat jou " "installeerboom korrek gegenereer is." #: ../yuminstall.py:803 msgid "" "Unable to read group information from repositories. This is a problem with " "the generation of your install tree." msgstr "" #: ../yuminstall.py:836 msgid "Uncategorized" msgstr "" #: ../yuminstall.py:1045 #, python-format msgid "" "Your selected packages require %d MB of free space for installation, but you " "do not have enough available. You can change your selections or exit the " "installer." msgstr "" #: ../yuminstall.py:1206 #, python-format msgid "" "You appear to be upgrading from a system which is too old to upgrade to this " "version of %s. Are you sure you wish to continue the upgrade process?" msgstr "" "Dit lyk of jy 'n rekenaar probeer opgradeer wat te oud is om met hierdie " "weergawe van %s opgegradeer te word. Is jy seker jy wil met die " "opgradeerproses voortgaan?" #: ../yuminstall.py:1235 msgid "Install Starting" msgstr "Installering begin" #: ../yuminstall.py:1236 #, fuzzy msgid "Starting install process. This may take several minutes..." msgstr "Begin installeerproses, dit mag 'n hele paar minute duur..." #: ../yuminstall.py:1252 #, fuzzy msgid "Post Upgrade" msgstr "Opgradeer" #: ../yuminstall.py:1253 #, fuzzy msgid "Performing post upgrade configuration..." msgstr "Doen tans náinstalleer-instelling..." #: ../yuminstall.py:1255 msgid "Post Install" msgstr "Náinstallering" #: ../yuminstall.py:1256 msgid "Performing post install configuration..." msgstr "Doen tans náinstalleer-instelling..." #: ../yuminstall.py:1473 #, fuzzy msgid "Installation Progress" msgstr "Installeertipe" #: ../yuminstall.py:1508 msgid "Dependency Check" msgstr "Afhanklikheidstoets" #: ../yuminstall.py:1509 msgid "Checking dependencies in packages selected for installation..." msgstr "Kontroleer afhanklikes in pakkette gekies vir installering..." #: ../zfcp.py:43 msgid "You have not specified a device number or the number is invalid" msgstr "" "Jy het nie 'n toestelnommer gespesifiseer nie, of die nommer is ongeldig" #: ../zfcp.py:45 msgid "You have not specified a worldwide port name or the name is invalid." msgstr "" "Jy het nie 'n wêreldwyepoort-naam gespesifiseer nie, of die naam is ongeldig." #: ../zfcp.py:47 msgid "You have not specified a FCP LUN or the number is invalid." msgstr "Jy het nie 'n FCP-LUN gespesifiseer nie, of die nommer is ongeldig." #: ../iw/account_gui.py:26 msgid "Caps Lock is on." msgstr "" #: ../iw/account_gui.py:33 msgid "Set Root Password" msgstr "Stel wortelwagwoord op" #: ../iw/account_gui.py:48 ../iw/account_gui.py:56 ../iw/account_gui.py:63 #: ../iw/account_gui.py:72 ../textw/userauth_text.py:69 msgid "Error with Password" msgstr "Probleem met wagwoord" #: ../iw/account_gui.py:49 msgid "" "You must enter your root password and confirm it by typing it a second time " "to continue." msgstr "" "Om voort te gaan, moet jy jou wortelwagwoord intik en dit bevestig deur dit " "'n tweede keer in te tik." #: ../iw/account_gui.py:57 msgid "The passwords you entered were different. Please try again." msgstr "Die wagwoorde wat jy ingetik het, verskil. Probeer weer." #: ../iw/account_gui.py:64 msgid "The root password must be at least six characters long." msgstr "Die wortelwagwoord moet ten minste ses karakters lank wees." #: ../iw/account_gui.py:73 ../textw/userauth_text.py:70 #, fuzzy msgid "" "Requested password contains non-ASCII characters, which are not allowed." msgstr "" "Gekose wagwoord bevat nie-ASCII-karakters wat nie vir gebruik in die " "wagwoord toegelaat word nie." #: ../iw/account_gui.py:107 msgid "" "The root account is used for administering the system. Enter a password for " "the root user." msgstr "" "Die wortelrekening word vir administrasie van die rekenaar gebruik. Tik 'n " "wagwoord vir die wortelgebruiker in." #: ../iw/account_gui.py:122 msgid "Root _Password: " msgstr "Wortel_wagwoord: " #: ../iw/account_gui.py:125 msgid "_Confirm: " msgstr "_Bevestig: " #: ../iw/autopart_type.py:155 #, fuzzy msgid "Invalid Initiator Name" msgstr "Ongeldige volumegroep-naam" #: ../iw/autopart_type.py:156 #, fuzzy msgid "You must provide an initiator name." msgstr "Jy moet 'n gebruikernaam verskaf" #: ../iw/autopart_type.py:178 #, fuzzy msgid "Error with Data" msgstr "Fout met data" #: ../iw/autopart_type.py:286 ../textw/partition_text.py:1556 #, fuzzy msgid "Remove all partitions on selected drives and create default layout" msgstr "Verwyder alle partisies op hierdie rekenaar" #: ../iw/autopart_type.py:287 ../textw/partition_text.py:1557 #, fuzzy msgid "Remove Linux partitions on selected drives and create default layout" msgstr "Verwyder alle partisies op hierdie rekenaar" #: ../iw/autopart_type.py:288 ../textw/partition_text.py:1558 #, fuzzy msgid "Use free space on selected drives and create default layout" msgstr "Verwyder alle partisies op hierdie rekenaar" #: ../iw/autopart_type.py:289 ../textw/partition_text.py:1559 msgid "Create custom layout" msgstr "" #: ../iw/blpasswidget.py:37 msgid "" "A boot loader password prevents users from changing options passed to the " "kernel. For greater system security, it is recommended that you set a " "password." msgstr "" "'n Selflaaier-wagwoord verhoed dat gebruikers opsies wat na die kern " "aangegee word, verander. Ons stel ter wille van beter rekenaarsekuriteit " "voor dat jy 'n wagwoord stel." #: ../iw/blpasswidget.py:42 msgid "_Use a boot loader password" msgstr "_Gebruik 'n selflaaier-wagwoord" #: ../iw/blpasswidget.py:73 msgid "Change _password" msgstr "Verander _wagwoord" #: ../iw/blpasswidget.py:96 msgid "Enter Boot Loader Password" msgstr "Tik selflaaier-wagwoord in" #: ../iw/blpasswidget.py:102 msgid "" "Enter a boot loader password and then confirm it. (Note that your BIOS " "keymap may be different than the actual keymap you are used to.)" msgstr "" "Tik 'n selflaaier-wagwoord in en bevestig dit. (Let op dat jou BIOS-" "sleutelkaart dalk kan verskil van die sleutelkaart waaraan jy gewoond is.)" #: ../iw/blpasswidget.py:109 msgid "_Password:" msgstr "_Wagwoord:" #: ../iw/blpasswidget.py:115 msgid "Con_firm:" msgstr "Beves_tig:" #: ../iw/blpasswidget.py:136 msgid "Passwords don't match" msgstr "Wagwoorde verskil" #: ../iw/blpasswidget.py:137 ../textw/bootloader_text.py:439 msgid "Passwords do not match" msgstr "Die wagwoorde verskil" #: ../iw/blpasswidget.py:146 ../textw/bootloader_text.py:449 #, fuzzy msgid "" "Your boot loader password is shorter than six characters. We recommend a " "longer boot loader password.\n" "\n" "Would you like to continue with this password?" msgstr "" "Jou selflaaier-wagwoord is minder as ses karakters lank. Ons beveel 'n " "langer selflaaier-wagwoord aan.\n" "\n" "Wil jy voortgaan sonder met hierdie wagwoord?" #: ../iw/bootloader_advanced_gui.py:27 msgid "Advanced Boot Loader Configuration" msgstr "Gevorderde selflaaier-instelling" #: ../iw/bootloader_advanced_gui.py:42 ../textw/bootloader_text.py:124 #, fuzzy msgid "" "If LBA32 is not supported by your system's BIOS, forcing its use can prevent " "your machine from booting.\n" "\n" "Would you like to continue and force LBA32 mode?" msgstr "" "As jy jou selflaaier dwing om LBA32 te gebruik terwyl die BIOS nie daarmee " "werk nie, sal jou rekenaar dalk nie meer kan selflaai nie.\n" "\n" "Wil jy voortgaan en LBA32-modus afdwing?" #: ../iw/bootloader_advanced_gui.py:48 msgid "Force LBA32" msgstr "Dwing LBA32 af" #: ../iw/bootloader_advanced_gui.py:69 msgid "_Force LBA32 (not normally required)" msgstr "_Dwing LBA32 af (gewoonlik nie vereis nie)" #: ../iw/bootloader_advanced_gui.py:73 msgid "" "If you wish to add default options to the boot command, enter them into the " "'General kernel parameters' field." msgstr "" "As jy verstekopsies by die selflaaibevel wil voeg, tik hulle in die " "'Algemene kernparameters'-veld in." #: ../iw/bootloader_advanced_gui.py:79 msgid "_General kernel parameters" msgstr "_Algemene kernparameters" #: ../iw/bootloader_main_gui.py:30 ../textw/bootloader_text.py:42 #: ../textw/bootloader_text.py:107 ../textw/bootloader_text.py:164 #: ../textw/bootloader_text.py:282 ../textw/bootloader_text.py:391 msgid "Boot Loader Configuration" msgstr "Selflaaier-instelling" #: ../iw/bootloader_main_gui.py:117 #, python-format msgid "The %s boot loader will be installed on /dev/%s." msgstr "Die %s-selflaaier sal op /dev/%s geïnstalleer word." #: ../iw/bootloader_main_gui.py:123 msgid "No boot loader will be installed." msgstr "Geen selflaaier sal geïnstalleer word nie." #: ../iw/bootloader_main_gui.py:152 msgid "Configure advanced boot loader _options" msgstr "Stel gevorderde selflaaier-_opsies in" #: ../iw/bootlocwidget.py:39 msgid "Install Boot Loader record on:" msgstr "Installeer selflaaierrekord op:" #: ../iw/bootlocwidget.py:72 msgid "_Change Drive Order" msgstr "_Verander aandrywervolgorde" #: ../iw/bootlocwidget.py:84 msgid "Edit Drive Order" msgstr "Redigeer aandrywervolgorde" #: ../iw/bootlocwidget.py:89 msgid "" "Arrange the drives to be in the same order as used by the BIOS. Changing the " "drive order may be useful if you have multiple SCSI adapters or both SCSI " "and IDE adapters and want to boot from the SCSI device.\n" "\n" "Changing the drive order will change where the installation program locates " "the Master Boot Record (MBR)." msgstr "" "Rangskik die aandrywers in dieselfde volgorde as wat deur die BIOS gebruik " "word. Om die aandrywervolgorde te verander, kan nuttig wees as jy meer as " "een SCSI-passtukke het, of beide SCSI- en IDE-passtukke, en jy wil van die " "SCSI-toestel af selflaai.\n" "\n" "Verandering van die aandrywervolgorde verander die ligging waar die " "installeerprogram die meesterselflaairekord (MBR) vind." #: ../iw/confirm_gui.py:29 ../textw/confirm_text.py:35 #: ../textw/confirm_text.py:63 msgid "Reboot?" msgstr "Herselflaai?" #: ../iw/confirm_gui.py:30 ../textw/confirm_text.py:36 #: ../textw/confirm_text.py:64 msgid "The system will be rebooted now." msgstr "Die rekenaar sal nou herselflaai word." #: ../iw/confirm_gui.py:74 msgid "About to Install" msgstr "Gereed vir installering" #: ../iw/confirm_gui.py:80 #, python-format msgid "Click next to begin installation of %s." msgstr "Kliek volgende om %s te begin installeer." #: ../iw/confirm_gui.py:81 #, python-format msgid "" "A complete log of the installation can be found in the file '%s' after " "rebooting your system.\n" "\n" "A kickstart file containing the installation options selected can be found " "in the file '%s' after rebooting the system." msgstr "" "'n Volledige staaflêer van die installering kan nadat jou rekenaar " "geherselflaai het, in die lêer '%s' gevind word.\n" "\n" "'n Aansit-lêer met die gekose installeeropsies kan nadat jou rekenaar " "geherselflaai het, in die lêer '%s' gevind word." #: ../iw/confirm_gui.py:88 msgid "About to Upgrade" msgstr "Gereed vir opgradering" #: ../iw/confirm_gui.py:94 #, python-format msgid "Click next to begin upgrade of %s." msgstr "Kliek volgende om %s te begin opgradeer." #: ../iw/confirm_gui.py:95 #, python-format msgid "" "A complete log of the upgrade can be found in the file '%s' after rebooting " "your system." msgstr "" "'n Volledige staaflêer van die opgradering kan nadat jou rekenaar " "geherselflaai het, in die lêer '%s' gevind word." #: ../iw/congrats_gui.py:25 msgid "Congratulations" msgstr "Geluk!" #: ../iw/congrats_gui.py:65 #, fuzzy msgid "" "Press the \"Reboot\" button to reboot your system.\n" "\n" msgstr "" "\n" "\n" "Druk 'OK' om jou rekenaar te laat herselflaai." #: ../iw/congrats_gui.py:69 #, python-format msgid "" "Congratulations, the installation is complete.\n" "\n" "%s%s" msgstr "" "Geluk, die installering is klaar.\n" "\n" "%s%s" #: ../iw/driveorderwidget.py:44 msgid "Drive" msgstr "Skywe" #: ../iw/driveorderwidget.py:44 ../textw/partition_text.py:1462 msgid "Size" msgstr "Grootte" #: ../iw/driveorderwidget.py:44 msgid "Model" msgstr "Model" #: ../iw/examine_gui.py:28 msgid "Upgrade Examine" msgstr "Opgradeerspeur" #: ../iw/examine_gui.py:50 #, python-format msgid "_Install %s" msgstr "_Installeer %s" #: ../iw/examine_gui.py:52 msgid "" "Choose this option to freshly install your system. Existing software and " "data may be overwritten depending on your configuration choices." msgstr "" "Kies hierdie opsie om jou rekenaar van voor af te laat installeer. " "Afhangende van jou instelling-keuse sal bestaande sagteware en data dalk " "oorheengeskryf word." #: ../iw/examine_gui.py:56 msgid "_Upgrade an existing installation" msgstr "_Opdateer 'n bestaande installasie" #: ../iw/examine_gui.py:58 #, fuzzy, python-format msgid "" "Choose this option if you would like to upgrade your existing %s system. " "This option preserves the existing data on your drives." msgstr "" "Kies hierdie opsie as jy jou bestaande %s-stelsel wil opgradeer. Hierdie " "opsie sal die bestaande data op jou aandrywers behou." #: ../iw/examine_gui.py:105 ../iw/pixmapRadioButtonGroup_gui.py:197 msgid "The following installed system will be upgraded:" msgstr "Die volgende geïnstalleerde stelsel sal opgegradeer word:" #: ../iw/examine_gui.py:118 msgid "Unknown Linux system" msgstr "Onbekende Linux-stelsel" #: ../iw/language_gui.py:24 ../textw/language_text.py:37 msgid "Language Selection" msgstr "Taalseleksie" #: ../iw/language_gui.py:67 ../textw/language_text.py:38 ../loader2/lang.c:367 msgid "What language would you like to use during the installation process?" msgstr "Watter taal wil jy graag tydens die installeerproses gebruik?" #: ../iw/lvm_dialog_gui.py:115 ../iw/lvm_dialog_gui.py:162 #: ../iw/lvm_dialog_gui.py:173 ../iw/lvm_dialog_gui.py:213 #: ../iw/lvm_dialog_gui.py:287 ../iw/lvm_dialog_gui.py:601 #: ../iw/lvm_dialog_gui.py:669 ../iw/lvm_dialog_gui.py:880 #: ../textw/partition_text.py:1313 ../textw/partition_text.py:1332 msgid "Not enough space" msgstr "Onvoldoende spasie" #: ../iw/lvm_dialog_gui.py:116 msgid "" "The physical extent size cannot be changed because otherwise the space " "required by the currently defined logical volumes will be increased to more " "than the available space." msgstr "" "Die fisiese grootte kan nie verander word nie aangesien die ruimte wat deur " "die huidig gedefinieerde logiese volumes dan tot meer as die beskikbare " "spasie vergroot sou word." #: ../iw/lvm_dialog_gui.py:125 msgid "Confirm Physical Extent Change" msgstr "Bevestig fisiesegrootte-verandering" #: ../iw/lvm_dialog_gui.py:126 #, fuzzy msgid "" "This change in the value of the physical extent will require the sizes of " "the current logical volume requests to be rounded up in size to an integer " "multiple of the physical extent.\n" "\n" "This change will take effect immediately." msgstr "" "Hierdie verandering in die waarde van die fisiese grootte vereis dat die " "groottes van die huidige logiesevolume-versoeke tot 'n heelgetalmeervoud van " "die fisiese grootte opgerond word.\n" "\n" "Hierdie verandering sal onmiddellik in werking tree." #: ../iw/lvm_dialog_gui.py:135 ../iw/lvm_dialog_gui.py:195 #: ../iw/network_gui.py:143 ../iw/network_gui.py:147 ../iw/network_gui.py:167 msgid "C_ontinue" msgstr "G_aan voort" #: ../iw/lvm_dialog_gui.py:163 #, python-format msgid "" "The physical extent size cannot be changed because the value selected (%" "10.2f MB) is larger than the smallest physical volume (%10.2f MB) in the " "volume group." msgstr "" "Die fisiese grootte kan nie verander word nie aangesien die geselekteerde " "waarde (%10.2f megagreep) groter is as die kleinste fisiese volume (%10.2f " "megagreep) in die volumegroep." #: ../iw/lvm_dialog_gui.py:174 #, python-format msgid "" "The physical extent size cannot be changed because the value selected (%" "10.2f MB) is too large compared to the size of the smallest physical volume " "(%10.2f MB) in the volume group." msgstr "" "Die fisiese grootte kan nie verander word nie aangesien die geselekteerde " "waarde (%10.2f megagreep) te groot is in vergelyking met die grootte van die " "kleinste fisiese volume (%10.2f megagreep) in die volumegroep." #: ../iw/lvm_dialog_gui.py:188 msgid "Too small" msgstr "Te klein" #: ../iw/lvm_dialog_gui.py:189 msgid "" "This change in the value of the physical extent will waste substantial space " "on one or more of the physical volumes in the volume group." msgstr "" "Hierdie verandering in die waarde van die fisiese grootte sal redelik baie " "spasie op een of meer van die fisiese volumes in die volumegroep vermors." #: ../iw/lvm_dialog_gui.py:214 #, python-format msgid "" "The physical extent size cannot be changed because the resulting maximum " "logical volume size (%10.2f MB) is smaller than one or more of the currently " "defined logical volumes." msgstr "" "Die fisiese grootte kan nie verander word nie aangesien die gevolglike " "maksimum logiesevolume-grootte (%10.2f megagreep) kleiner is as een of meer " "van die huidig gedefinieerde logiese volumes." #: ../iw/lvm_dialog_gui.py:288 msgid "" "You cannot remove this physical volume because otherwise the volume group " "will be too small to hold the currently defined logical volumes." msgstr "" "Jy kan nie hierdie fisiese volume verwyder nie aangesien die volumegroep " "andersins te klein sal wees om die huidig gedefinieerde logiese volumes te " "huisves." #: ../iw/lvm_dialog_gui.py:368 ../textw/partition_text.py:1151 msgid "Make Logical Volume" msgstr "Maak logiese volume" #: ../iw/lvm_dialog_gui.py:371 #, python-format msgid "Edit Logical Volume: %s" msgstr "Redigeer logiese volume: %s" #: ../iw/lvm_dialog_gui.py:373 ../textw/partition_text.py:1149 msgid "Edit Logical Volume" msgstr "Redigeer logiese volume" #: ../iw/lvm_dialog_gui.py:386 ../iw/partition_dialog_gui.py:293 #: ../iw/raid_dialog_gui.py:280 msgid "_Mount Point:" msgstr "_Hegpunt:" #: ../iw/lvm_dialog_gui.py:394 ../iw/raid_dialog_gui.py:289 msgid "_File System Type:" msgstr "_Lêerstelsel-soort:" #: ../iw/lvm_dialog_gui.py:404 ../iw/partition_dialog_gui.py:312 #: ../iw/raid_dialog_gui.py:299 msgid "Original File System Type:" msgstr "Oorspronlikelêerstelsel-soort:" #: ../iw/lvm_dialog_gui.py:409 ../iw/partition_dialog_gui.py:323 #: ../iw/raid_dialog_gui.py:304 msgid "Unknown" msgstr "Onbekend" #: ../iw/lvm_dialog_gui.py:415 ../iw/partition_dialog_gui.py:358 #: ../iw/raid_dialog_gui.py:310 msgid "Original File System Label:" msgstr "Oorspronlikelêerstelsel-etiket:" #: ../iw/lvm_dialog_gui.py:424 msgid "_Logical Volume Name:" msgstr "_Logiesevolume-naam:" #: ../iw/lvm_dialog_gui.py:432 ../textw/partition_text.py:298 msgid "Logical Volume Name:" msgstr "Logiesevolume-naam:" #: ../iw/lvm_dialog_gui.py:440 ../iw/partition_dialog_gui.py:370 msgid "_Size (MB):" msgstr "_Grootte (megagreep):" #: ../iw/lvm_dialog_gui.py:446 ../iw/partition_dialog_gui.py:387 #: ../iw/partition_dialog_gui.py:430 ../textw/partition_text.py:313 #: ../textw/partition_text.py:390 ../textw/partition_text.py:473 #: ../textw/partition_text.py:581 msgid "Size (MB):" msgstr "Grootte (megagreep):" #: ../iw/lvm_dialog_gui.py:461 #, python-format msgid "(Max size is %s MB)" msgstr "(Maks grootte is %s megagreep)" #: ../iw/lvm_dialog_gui.py:522 ../textw/partition_text.py:1302 msgid "Illegal size" msgstr "Onwettige grootte" #: ../iw/lvm_dialog_gui.py:523 ../textw/partition_text.py:1303 msgid "The requested size as entered is not a valid number greater than 0." msgstr "Die gekose ingetikte grootte is nie 'n geldige syfer groter as 0 nie." #: ../iw/lvm_dialog_gui.py:556 msgid "Mount point in use" msgstr "Hegpunt in gebruik" #: ../iw/lvm_dialog_gui.py:557 #, fuzzy, python-format msgid "The mount point \"%s\" is in use. Please pick another." msgstr "Die hegpunt \"%s\" word tans gebruik; kies 'n ander een." #: ../iw/lvm_dialog_gui.py:568 ../textw/partition_text.py:1273 msgid "Illegal Logical Volume Name" msgstr "Onwettige logiesevolume-naam" #: ../iw/lvm_dialog_gui.py:587 ../textw/partition_text.py:1290 msgid "Illegal logical volume name" msgstr "Onwettige logiesevolume-naam" #: ../iw/lvm_dialog_gui.py:588 ../textw/partition_text.py:1291 #, python-format msgid "The logical volume name \"%s\" is already in use. Please pick another." msgstr "Die logiesevolume-naam \"%s\" word reeds gebruik. Kies 'n ander een." #: ../iw/lvm_dialog_gui.py:602 #, fuzzy, python-format msgid "" "The current requested size (%10.2f MB) is larger than the maximum logical " "volume size (%10.2f MB). To increase this limit you can create more Physical " "Volumes from unpartitioned disk space and add them to this Volume Group." msgstr "" "Die huidig gekose grootte (%10.2f megagreep) is groter as die maksimum " "logiesevolume-grootte (%10.2f megagreep). Om hierdie limiet te vergroot, kan " "jy die fisiese grootte van hierdie volumegroep vergroot." #: ../iw/lvm_dialog_gui.py:646 ../iw/partition_dialog_gui.py:179 #: ../iw/partition_dialog_gui.py:191 ../iw/partition_dialog_gui.py:239 #: ../iw/raid_dialog_gui.py:207 ../textw/partition_text.py:922 #: ../textw/partition_text.py:944 ../textw/partition_text.py:1119 #: ../textw/partition_text.py:1352 msgid "Error With Request" msgstr "Fout met versoek" #: ../iw/lvm_dialog_gui.py:670 ../iw/lvm_dialog_gui.py:881 #, fuzzy, python-format msgid "" "The logical volumes you have configured require %d MB, but the volume group " "only has %d MB. Please either make the volume group larger or make the " "logical volume(s) smaller." msgstr "" "Die logiese volumes wat jy ingestel het, verg %g megagreep, maar die " "volumegroep bevat slegs %g megagreep. Maak eers die volumegroep groter of " "maak die logiese volume(s) kleiner." #: ../iw/lvm_dialog_gui.py:720 msgid "No free slots" msgstr "Geen vry gleuwe nie" #: ../iw/lvm_dialog_gui.py:721 #, python-format msgid "You cannot create more than %s logical volumes per volume group." msgstr "Jy kan nie meer as %s logiese volumes per volumegroep skep nie." #: ../iw/lvm_dialog_gui.py:727 msgid "No free space" msgstr "Geen oop spasie nie" #: ../iw/lvm_dialog_gui.py:728 #, fuzzy msgid "" "There is no room left in the volume group to create new logical volumes. To " "add a logical volume you must reduce the size of one or more of the " "currently existing logical volumes" msgstr "" "Daar is niks plek in die volumegroep oor om nuwe logiese volumes te skep " "nie. Om 'n logiese volume by te voeg, moet jy die grootte van een of meer " "van die huidig bestaande logiese volumes verminder" #: ../iw/lvm_dialog_gui.py:756 #, fuzzy, python-format msgid "Are you sure you want to delete the logical volume \"%s\"?" msgstr "Is jy seker jy wil die logiese volume \"%s\" skrap?" #: ../iw/lvm_dialog_gui.py:892 msgid "Invalid Volume Group Name" msgstr "Ongeldige volumegroep-naam" #: ../iw/lvm_dialog_gui.py:903 msgid "Name in use" msgstr "Naam in gebruik" #: ../iw/lvm_dialog_gui.py:904 #, python-format msgid "The volume group name \"%s\" is already in use. Please pick another." msgstr "Die volumegroep-naam \"%s\" word reeds gebruik. Kies 'n ander een." #: ../iw/lvm_dialog_gui.py:947 msgid "Not enough physical volumes" msgstr "Onvoldoende fisiese volumes" #: ../iw/lvm_dialog_gui.py:948 msgid "" "At least one unused physical volume partition is needed to create an LVM " "Volume Group.\n" "\n" "Create a partition or RAID array of type \"physical volume (LVM)\" and then " "select the \"LVM\" option again." msgstr "" "Ten minste een ongebruikte fisiesevolume-partisie word vereis om 'n LVM-" "volumegroep te skep.\n" "\n" "Skep 'n partisie of RAID-reeks van die soort \"fisiese volume (LVM)\"en kies " "dan weer die \"LVM\"-opsie." #: ../iw/lvm_dialog_gui.py:959 msgid "Make LVM Volume Group" msgstr "Maak LVM-volumegroep" #: ../iw/lvm_dialog_gui.py:962 #, python-format msgid "Edit LVM Volume Group: %s" msgstr "Redigeer LVM-volumegroep: %s" #: ../iw/lvm_dialog_gui.py:964 msgid "Edit LVM Volume Group" msgstr "Redigeer LVM-volumegroep" #: ../iw/lvm_dialog_gui.py:980 msgid "_Volume Group Name:" msgstr "_Volumegroep-naam:" #: ../iw/lvm_dialog_gui.py:988 msgid "Volume Group Name:" msgstr "Volumegroep-naam:" #: ../iw/lvm_dialog_gui.py:996 msgid "_Physical Extent:" msgstr "_Fisiese grootte:" #: ../iw/lvm_dialog_gui.py:1011 msgid "Physical Volumes to _Use:" msgstr "Fisiese volumes om te _gebruik:" #: ../iw/lvm_dialog_gui.py:1017 msgid "Used Space:" msgstr "Gebruikte spasie:" #: ../iw/lvm_dialog_gui.py:1034 msgid "Free Space:" msgstr "Oop spasie:" #: ../iw/lvm_dialog_gui.py:1052 msgid "Total Space:" msgstr "Totale spasie:" #: ../iw/lvm_dialog_gui.py:1081 msgid "Logical Volume Name" msgstr "Logiesevolume-naam" #: ../iw/lvm_dialog_gui.py:1084 ../iw/partition_gui.py:364 #: ../iw/upgrade_swap_gui.py:136 ../textw/partition_text.py:1462 #: ../textw/upgrade_text.py:106 msgid "Mount Point" msgstr "Hegpunt" #: ../iw/lvm_dialog_gui.py:1087 ../iw/partition_gui.py:369 msgid "Size (MB)" msgstr "Grootte (megagreep)" #: ../iw/lvm_dialog_gui.py:1101 ../iw/osbootwidget.py:96 msgid "_Add" msgstr "_Byvoeg" #: ../iw/lvm_dialog_gui.py:1104 ../iw/network_gui.py:448 #: ../iw/osbootwidget.py:100 ../iw/partition_gui.py:1352 msgid "_Edit" msgstr "_Redigeer" #: ../iw/lvm_dialog_gui.py:1119 msgid "Logical Volumes" msgstr "Logiese volumes" #: ../iw/mouse_gui.py:24 msgid "Mouse Configuration" msgstr "Muis-instelling" #: ../iw/mouse_gui.py:77 ../textw/mouse_text.py:20 msgid "/dev/ttyS0 (COM1 under DOS)" msgstr "/dev/ttyS0 (COM1 in DOS)" #: ../iw/mouse_gui.py:78 ../textw/mouse_text.py:21 msgid "/dev/ttyS1 (COM2 under DOS)" msgstr "/dev/ttyS1 (COM2 in DOS)" #: ../iw/mouse_gui.py:79 ../textw/mouse_text.py:22 msgid "/dev/ttyS2 (COM3 under DOS)" msgstr "/dev/ttyS2 (COM3 in DOS)" #: ../iw/mouse_gui.py:80 ../textw/mouse_text.py:23 msgid "/dev/ttyS3 (COM4 under DOS)" msgstr "/dev/ttyS3 (COM4 in DOS)" #: ../iw/mouse_gui.py:90 ../iw/osbootwidget.py:157 msgid "_Device" msgstr "_Toestel" #: ../iw/mouse_gui.py:136 msgid "_Model" msgstr "_Model" #: ../iw/mouse_gui.py:234 msgid "_Emulate 3 buttons" msgstr "_Maak soos 3 knoppies" #: ../iw/mouse_gui.py:249 msgid "Select the appropriate mouse for the system." msgstr "Kies die regte muis vir die rekenaar." #: ../iw/netconfig_dialog.py:137 #, python-format msgid "" "An error occurred converting the value entered for \"%s\":\n" "%s" msgstr "" "Daar was fout met die omskep van die ingetikte waarde vir \"%s\":\n" "%s" #: ../iw/netconfig_dialog.py:139 ../iw/netconfig_dialog.py:148 #: ../iw/network_gui.py:142 ../iw/network_gui.py:146 ../iw/network_gui.py:150 #: ../iw/network_gui.py:154 ../iw/network_gui.py:162 ../iw/network_gui.py:167 #: ../textw/network_text.py:47 ../textw/network_text.py:52 #: ../textw/network_text.py:58 msgid "Error With Data" msgstr "Fout met data" #: ../iw/netconfig_dialog.py:147 ../iw/network_gui.py:155 #: ../textw/network_text.py:48 #, fuzzy, python-format msgid "A value is required for the field %s." msgstr "'n Waarde word vir die veld \"%s\" vereis." #: ../iw/netconfig_dialog.py:169 msgid "Dynamic IP" msgstr "Dinamiese IP" #: ../iw/netconfig_dialog.py:170 ../loader2/net.c:413 ../loader2/net.c:830 #, c-format, python-format msgid "Sending request for IP information for %s..." msgstr "Stuur versoek vir IP-inligting vir %s..." #: ../iw/netconfig_dialog.py:191 ../iw/netconfig_dialog.py:194 #: ../textw/network_text.py:88 tmp/netpostconfig.glade.h:12 msgid "IP Address" msgstr "IP-adres" #: ../iw/netconfig_dialog.py:201 ../iw/netconfig_dialog.py:204 msgid "Netmask" msgstr "Netmask" #: ../iw/netconfig_dialog.py:211 #, fuzzy msgid "IPv4 CIDR prefix must be between 0 and 32." msgstr "IP-adresse moet syfers van 1 tot 255 bevat" #: ../iw/netconfig_dialog.py:212 ../iw/netconfig_dialog.py:218 #: ../iw/netconfig_dialog.py:226 ../iw/netconfig_dialog.py:229 #, fuzzy msgid "IPv4 Network Mask" msgstr "IP/Netmask" #: ../iw/netconfig_dialog.py:235 ../iw/netconfig_dialog.py:238 #: ../iw/network_gui.py:27 ../iw/network_gui.py:524 msgid "Gateway" msgstr "Deurgang" #: ../iw/netconfig_dialog.py:245 msgid "Nameserver" msgstr "Naambediener" #: ../iw/netconfig_dialog.py:255 #, fuzzy msgid "Error configuring network device:" msgstr "" "Daar was fout tydens die skoonmaak van die teikenaandrywers. Kloon het " "misluk." #: ../iw/netconfig_dialog.py:268 #, fuzzy msgid "Error configuring network device" msgstr "" "Daar was fout tydens die skoonmaak van die teikenaandrywers. Kloon het " "misluk." #: ../iw/network_gui.py:27 ../iw/network_gui.py:526 msgid "Primary DNS" msgstr "Primêre DNS" #: ../iw/network_gui.py:27 ../iw/network_gui.py:528 msgid "Secondary DNS" msgstr "Sekondêre DNS" #: ../iw/network_gui.py:28 msgid "_Gateway" msgstr "_Deurgang" #: ../iw/network_gui.py:28 msgid "_Primary DNS" msgstr "_Primêre DNS" #: ../iw/network_gui.py:28 msgid "_Secondary DNS" msgstr "_Sekondêre DNS" #: ../iw/network_gui.py:31 ../textw/network_text.py:527 msgid "Network Configuration" msgstr "Netwerk-instelling" #: ../iw/network_gui.py:143 msgid "" "You have not specified a hostname. Depending on your network environment " "this may cause problems later." msgstr "" "Jy het nie 'n gasheer gespesifiseer nie. Afhangende van jou netwerkomgewing " "kan dit dalk later probleme veroorsaak." #: ../iw/network_gui.py:147 #, python-format msgid "" "You have not specified the field \"%s\". Depending on your network " "environment this may cause problems later." msgstr "" "Jy het nie die veld \"%s\" gespesifiseer nie. Afhangende van jou " "netwerkomgewing kan dit dalk later probleme veroorsaak." #: ../iw/network_gui.py:151 ../textw/network_text.py:817 #, python-format msgid "" "The hostname \"%s\" is not valid for the following reason:\n" "\n" "%s" msgstr "" "Die gasheer \"%s\" is nie geldig nie, om die volgende rede:\n" "\n" "%s" #: ../iw/network_gui.py:158 ../textw/network_text.py:38 #, fuzzy, python-format msgid "Error With %s Data" msgstr "Fout met data" #: ../iw/network_gui.py:159 ../textw/network_text.py:39 #: ../textw/network_text.py:590 ../textw/network_text.py:594 #: ../textw/welcome_text.py:22 #, python-format msgid "%s" msgstr "%s" #: ../iw/network_gui.py:163 ../textw/network_text.py:59 #, fuzzy msgid "The IPv4 information you have entered is invalid." msgstr "Die IP-inligting wat jy ingetik het, is ongeldig." #: ../iw/network_gui.py:167 #, fuzzy msgid "" "You have no active network devices. Your system will not be able to " "communicate over a network by default without at least one device active." msgstr "" "Jy het geen aktiewe netwerktoestelle nie. Jou rekenaar sal nie by verstek " "oor 'n netwerk kan kommunikeer sonder ten minste een aktiewe toestel nie.\n" "\n" "LET WEL: As jy 'n PCMCIA-gebaseerde netwerkkaart het, moet jy dit op hierdie " "stadium liewers onaktief laat. Die kaart sal outomaties geaktiveer word " "sodra jy jou rekenaar laat herselflaai." #: ../iw/network_gui.py:292 ../iw/network_gui.py:306 msgid "Disabled" msgstr "Gedeaktiveer" #: ../iw/network_gui.py:389 msgid "Active on Boot" msgstr "Aktiveer by selflaai" #: ../iw/network_gui.py:391 ../iw/osbootwidget.py:67 #: ../iw/partition_gui.py:363 ../textw/bootloader_text.py:192 #: ../textw/bootloader_text.py:258 ../textw/mouse_text.py:38 #: ../textw/partition_text.py:1462 msgid "Device" msgstr "Toestel" #: ../iw/network_gui.py:393 #, fuzzy msgid "IPv4/Netmask" msgstr "IP/Netmask" #: ../iw/network_gui.py:395 msgid "IPv6/Prefix" msgstr "" #: ../iw/network_gui.py:455 msgid "Network Devices" msgstr "Netwerktoestelle" #: ../iw/network_gui.py:466 msgid "Set the hostname:" msgstr "Stel gasheernaam op:" #: ../iw/network_gui.py:471 msgid "_automatically via DHCP" msgstr "_outomaties met DHCP" #: ../iw/network_gui.py:478 msgid "_manually" msgstr "_handmatig" #: ../iw/network_gui.py:483 #, fuzzy msgid "(e.g., host.domain.com)" msgstr "(bv. \"gasheer.domein.com\")" #: ../iw/network_gui.py:489 msgid "Hostname" msgstr "Gasheernaam" #: ../iw/network_gui.py:533 msgid "Miscellaneous Settings" msgstr "Diverse opstellings" #: ../iw/network_gui.py:621 #, fuzzy msgid "Edit Device " msgstr "Redigeer RAID-toestel" #: ../iw/network_gui.py:625 msgid "Unknown Ethernet Device" msgstr "" #: ../iw/network_gui.py:631 #, fuzzy msgid "unknown" msgstr "Onbekend" #: ../iw/network_gui.py:633 #, fuzzy msgid "Hardware address: " msgstr "Hardewareadres:" #: ../iw/network_gui.py:769 ../textw/network_text.py:223 ../loader2/net.c:791 #, fuzzy msgid "Missing Protocol" msgstr "Vermiste groep" #: ../iw/network_gui.py:770 ../textw/network_text.py:224 #, fuzzy msgid "You must select at least IPv4 or IPv6 support." msgstr "Jy moet ten minste een taal kies om te installeer." #: ../iw/network_gui.py:793 ../iw/network_gui.py:834 ../iw/network_gui.py:840 #: ../textw/network_text.py:69 ../loader2/net.c:97 #, fuzzy msgid "Invalid Prefix" msgstr "Ongeldige IP-string" #: ../iw/network_gui.py:794 #, fuzzy msgid "IPv4 prefix must be between 0 and 32." msgstr "IP-adresse moet syfers van 1 tot 255 bevat" #: ../iw/network_gui.py:835 ../iw/network_gui.py:841 #, fuzzy msgid "IPv6 prefix must be between 0 and 128." msgstr "IP-adresse moet syfers van 1 tot 255 bevat" #: ../iw/osbootwidget.py:43 #, fuzzy msgid "" "You can configure the boot loader to boot other operating systems by " "selecting from the list. To add an operating systems that was not " "automatically detected, click 'Add.' To change the operating system booted " "by default, select 'Default' next to the desired operating system." msgstr "" "Jy kan die selflaaier instel om ander bedryfstelsels te laat selflaai. Dan " "sal jy 'n bedryfstelsel van 'n lys kan kies om te laat selflaai. Om " "bykomende bedryfstelsels by te voeg, wat nie outomaties bespeur word nie, " "kliek 'Byvoeg'. Om te verander watter bedryfstelsel by verstek selflaai, " "kies 'Verstek' langs die verlangde bedryfstelsel." #: ../iw/osbootwidget.py:67 ../textw/bootloader_text.py:258 msgid "Default" msgstr "Verstek" #: ../iw/osbootwidget.py:67 msgid "Label" msgstr "Etiket" #: ../iw/osbootwidget.py:130 msgid "Image" msgstr "Prent" #: ../iw/osbootwidget.py:137 #, fuzzy msgid "" "Enter a label for the boot loader menu to display. The device (or hard drive " "and partition number) is the device from which it boots." msgstr "" "Tik 'n etiket in wat in die selflaaier-kieslys vertoon sal word. Die toestel " "(of hardeskyf en partisienommer) is die toestel waarvandaan daar geselflaai " "word." #: ../iw/osbootwidget.py:149 msgid "_Label" msgstr "_Etiket" #: ../iw/osbootwidget.py:188 msgid "Default Boot _Target" msgstr "Verstek-selflaai_teiken" #: ../iw/osbootwidget.py:217 msgid "You must specify a label for the entry" msgstr "Jy moet 'n etiket vir die inskrywing spesifiseer" #: ../iw/osbootwidget.py:226 msgid "Boot label contains illegal characters" msgstr "Selflaaietiket bevat onwettige karakters" #: ../iw/osbootwidget.py:250 msgid "Duplicate Label" msgstr "Duplikaatetiket" #: ../iw/osbootwidget.py:251 msgid "This label is already in use for another boot entry." msgstr "Hierdie etiket word reeds vir 'n ander selflaaiinskrywing gebruik." #: ../iw/osbootwidget.py:264 msgid "Duplicate Device" msgstr "Duplikaattoestel" #: ../iw/osbootwidget.py:265 msgid "This device is already being used for another boot entry." msgstr "Hierdie toestel word reeds vir 'n ander selflaaiinskrywing gebruik." #: ../iw/osbootwidget.py:329 ../textw/bootloader_text.py:341 msgid "Cannot Delete" msgstr "Kan nie skrap nie" #: ../iw/osbootwidget.py:330 ../textw/bootloader_text.py:342 #, python-format msgid "" "This boot target cannot be deleted because it is for the %s system you are " "about to install." msgstr "" "Hierdie selflaaiteiken kan nie geskrap word nie aangesien dit vir die %s-" "stelsel is wat jy nou gaan installeer." #: ../iw/partition_dialog_gui.py:58 msgid "Additional Size Options" msgstr "Bykomende grootteopsies" #: ../iw/partition_dialog_gui.py:63 msgid "_Fixed size" msgstr "_Vaste grootte" #: ../iw/partition_dialog_gui.py:65 msgid "Fill all space _up to (MB):" msgstr "Vul alle spasie _tot (megagreep):" #: ../iw/partition_dialog_gui.py:75 msgid "Fill to maximum _allowable size" msgstr "Vul tot maksimum _toelaatbare grootte" #: ../iw/partition_dialog_gui.py:180 msgid "The end cylinder must be greater than the start cylinder." msgstr "Die endsilinder moet groter as die beginsilinder wees." #: ../iw/partition_dialog_gui.py:270 ../textw/partition_text.py:723 msgid "Add Partition" msgstr "Voeg partisie by" #: ../iw/partition_dialog_gui.py:273 #, python-format msgid "Edit Partition: /dev/%s" msgstr "Redigeer partisie: /dev/%s" #: ../iw/partition_dialog_gui.py:275 msgid "Edit Partition" msgstr "Redigeer partisie" #: ../iw/partition_dialog_gui.py:302 msgid "File System _Type:" msgstr "Lêerstelsel_soort:" #: ../iw/partition_dialog_gui.py:334 msgid "Allowable _Drives:" msgstr "Toelaatbare _toestelle:" #: ../iw/partition_dialog_gui.py:349 msgid "Drive:" msgstr "Aandrywer:" #: ../iw/partition_dialog_gui.py:393 msgid "_Start Cylinder:" msgstr "_Beginsilinder:" #: ../iw/partition_dialog_gui.py:411 msgid "_End Cylinder:" msgstr "_Endsilinder:" #: ../iw/partition_dialog_gui.py:463 msgid "Force to be a _primary partition" msgstr "Dwing om 'n _primêre partisie te wees" #: ../iw/partition_gui.py:314 #, python-format msgid "Drive %s (Geom: %s/%s/%s) (Model: %s)" msgstr "" #: ../iw/partition_gui.py:321 #, python-format msgid "Drive %s (%-0.f MB) (Model: %s)" msgstr "" #: ../iw/partition_gui.py:365 ../textw/partition_text.py:1462 msgid "Type" msgstr "Soort" #: ../iw/partition_gui.py:370 ../textw/partition_text.py:1462 msgid "Start" msgstr "Begin" #: ../iw/partition_gui.py:371 ../textw/partition_text.py:1462 msgid "End" msgstr "End" #: ../iw/partition_gui.py:408 msgid "" "Mount Point/\n" "RAID/Volume" msgstr "" "Hegpunt/\n" "RAID/volume" #: ../iw/partition_gui.py:410 msgid "" "Size\n" "(MB)" msgstr "" "Grootte\n" "(megagreep)" #: ../iw/partition_gui.py:542 ../textw/partition_text.py:1456 msgid "Partitioning" msgstr "Partisiëring" #: ../iw/partition_gui.py:633 msgid "" "The partitioning scheme you requested caused the following critical errors." msgstr "" #: ../iw/partition_gui.py:635 #, fuzzy, python-format msgid "" "You must correct these errors before you continue your installation of %s." msgstr "" "Hierdie foute moet reggemaak word voor jy met die installering van %s kan " "voortgaan." #: ../iw/partition_gui.py:641 msgid "Partitioning Errors" msgstr "Partisiëring-foute" #: ../iw/partition_gui.py:647 msgid "The partitioning scheme you requested generated the following warnings." msgstr "" #: ../iw/partition_gui.py:649 msgid "Would you like to continue with your requested partitioning scheme?" msgstr "Wil jy voortgaan met jou gekose partisieerskema?" #: ../iw/partition_gui.py:654 msgid "Partitioning Warnings" msgstr "Partisieer-waarskuwings" #: ../iw/partition_gui.py:676 msgid "Format Warnings" msgstr "Formateer-waarskuwings" #: ../iw/partition_gui.py:681 msgid "_Format" msgstr "_Formaat" #: ../iw/partition_gui.py:718 msgid "LVM Volume Groups" msgstr "LVM-volumegroepe" #: ../iw/partition_gui.py:753 msgid "RAID Devices" msgstr "RAID-toestelle" #: ../iw/partition_gui.py:781 ../iw/partition_gui.py:907 #: ../textw/partition_text.py:107 ../textw/partition_text.py:171 msgid "None" msgstr "Geen" #: ../iw/partition_gui.py:799 ../loader2/hdinstall.c:265 msgid "Hard Drives" msgstr "Hardeskywe" #: ../iw/partition_gui.py:870 ../textw/partition_text.py:153 #: ../textw/partition_text.py:192 msgid "Free space" msgstr "Oop spasie" #: ../iw/partition_gui.py:872 ../textw/partition_text.py:155 msgid "Extended" msgstr "Uitbrei" #: ../iw/partition_gui.py:874 ../textw/partition_text.py:157 msgid "software RAID" msgstr "sagteware-RAID" #: ../iw/partition_gui.py:909 msgid "Free" msgstr "Oop" #: ../iw/partition_gui.py:998 ../textw/partition_text.py:240 #, python-format msgid "Could not allocate requested partitions: %s." msgstr "Kon nie gekose partisies toeken nie: %s." #: ../iw/partition_gui.py:1007 #, python-format msgid "Warning: %s." msgstr "Waarskuwing: %s." #: ../iw/partition_gui.py:1189 ../iw/partition_gui.py:1203 msgid "Not supported" msgstr "Nie ondersteun nie" #: ../iw/partition_gui.py:1190 msgid "LVM is NOT supported on this platform." msgstr "Hierdie platform werk NIE met LVM nie." #: ../iw/partition_gui.py:1204 msgid "Software RAID is NOT supported on this platform." msgstr "Hierdie platform werk NIE met sagteware-RAID nie." #: ../iw/partition_gui.py:1211 msgid "No RAID minor device numbers available" msgstr "Geen RAID-kleintoestel-nommers beskikbaar nie" #: ../iw/partition_gui.py:1212 msgid "" "A software RAID device cannot be created because all of the available RAID " "minor device numbers have been used." msgstr "" "Kon nie 'n sagteware-RAID-toestel skep nie aangesien al die beskikbare RAID-" "kleintoestel-nommers gebruik is." #: ../iw/partition_gui.py:1226 msgid "RAID Options" msgstr "RAID-opsies" #: ../iw/partition_gui.py:1237 #, python-format msgid "" "Software RAID allows you to combine several disks into a larger RAID " "device. A RAID device can be configured to provide additional speed and " "reliability compared to using an individual drive. For more information on " "using RAID devices please consult the %s documentation.\n" "\n" "You currently have %s software RAID partition(s) free to use.\n" "\n" msgstr "" "Sagteware-RAID stel jou in staat om verskeie skywe tot 'n groter RAID-" "toestel te kombineer. 'n RAID-toestel kan ingestel word om bykomende spoed " "en betroubaarheid te verleen, in vergelyking met 'n individuele aandrywer. " "Vir nadere besonderhede oor die gebruik van RAID-toestelle, lees die %s-" "dokumentasie.\n" "\n" "Jy het tans %s sagteware-RAID-partisie(s) oop vir gebruik.\n" "\n" #: ../iw/partition_gui.py:1248 #, fuzzy msgid "" "To use RAID you must first create at least two partitions of type 'software " "RAID'. Then you can create a RAID device that can be formatted and " "mounted.\n" "\n" msgstr "" "Om RAID te gebruik, moet jy eers ten minste twee partisies van die soort " "'sagteware-RAID' skep. Daarna kan jy 'n RAID-toestel skep wat geformateer en " "geheg kan word.\n" "\n" #: ../iw/partition_gui.py:1254 msgid "What do you want to do now?" msgstr "Wat wil jy nou doen?" #: ../iw/partition_gui.py:1263 msgid "Create a software RAID _partition." msgstr "Skep 'n sagteware-RAID-_partisie." #: ../iw/partition_gui.py:1266 #, python-format msgid "Create a RAID _device [default=/dev/md%s]." msgstr "Skep 'n RAID-_toestel [verstek=/dev/md%s]." #: ../iw/partition_gui.py:1270 #, python-format msgid "Clone a _drive to create a RAID device [default=/dev/md%s]." msgstr "Kloon 'n _aandrywer om 'n RAID-toestel te skep [verstek=/dev/md%s]." #: ../iw/partition_gui.py:1309 msgid "Couldn't Create Drive Clone Editor" msgstr "Kon nie aandrywerkloon-redigeerder skep nie" #: ../iw/partition_gui.py:1310 msgid "The drive clone editor could not be created for some reason." msgstr "" "Die aandrywerkloon-redigeerder kon om die een of ander rede nie geskep word " "nie." #: ../iw/partition_gui.py:1351 msgid "Ne_w" msgstr "Nu_ut" #: ../iw/partition_gui.py:1354 msgid "Re_set" msgstr "Terug_stel" #: ../iw/partition_gui.py:1355 msgid "R_AID" msgstr "R_AID" #: ../iw/partition_gui.py:1356 msgid "_LVM" msgstr "_LVM" #: ../iw/partition_gui.py:1397 msgid "Hide RAID device/LVM Volume _Group members" msgstr "Verskuil RAID-toestel-/LVM-volume-_groeplede" #: ../iw/partition_ui_helpers_gui.py:91 ../iw/partition_ui_helpers_gui.py:112 #: ../iw/partition_ui_helpers_gui.py:114 ../textw/partition_text.py:263 #: ../textw/partition_text.py:265 ../textw/partition_text.py:267 #: ../textw/partition_text.py:292 msgid "" msgstr "" #: ../iw/partition_ui_helpers_gui.py:255 msgid "How would you like to prepare the file system on this partition?" msgstr "Wil jy die lêerstelsel op hierdie partisie voorberei?" #: ../iw/partition_ui_helpers_gui.py:263 msgid "Leave _unchanged (preserve data)" msgstr "Laat _onveranderd (behou data)" #: ../iw/partition_ui_helpers_gui.py:269 msgid "_Format partition as:" msgstr "_Formateer partisie as:" #: ../iw/partition_ui_helpers_gui.py:292 msgid "Mi_grate partition to:" msgstr "Mi_greer partisie na:" #: ../iw/partition_ui_helpers_gui.py:314 msgid "Check for _bad blocks?" msgstr "Kontroleer vir _slegte blokke?" #: ../iw/partition_ui_helpers_gui.py:349 #, fuzzy, python-format msgid "" "Partitions of type '%s' must be constrained to a single drive. To do this, " "select the drive in the 'Allowable Drives' checklist." msgstr "" "Partisies van die soort '%s' moet in 'n enkele aandrywer alleen teenwoordig " "wees. Doen dit deur die aandrywer in die 'Toelaatbare aandrywers'-lysie te " "merk." #: ../iw/partmethod_gui.py:25 ../textw/partmethod_text.py:24 msgid "Disk Partitioning Setup" msgstr "Skyfpartisiëring-opstelling" #: ../iw/partmethod_gui.py:50 msgid "_Automatically partition" msgstr "_Outomatiese partisiëring" #: ../iw/partmethod_gui.py:53 msgid "Manually partition with _Disk Druid" msgstr "Handmatige partisiëring met _Disk Druid" #: ../iw/progress_gui.py:31 msgid "Installing Packages" msgstr "Installeer pakkette" #: ../iw/raid_dialog_gui.py:247 msgid "" "At least two unused software RAID partitions are needed to create a RAID " "device.\n" "\n" "First create at least two partitions of type \"software RAID\", and then " "select the \"RAID\" option again." msgstr "" "Ten minste twee ongebruikte sagteware-RAID-partisies word vereis om 'n RAID-" "toestel te skep.\n" "\n" "Skep eers ten minste twee partisies van die soort \"sagteware-RAID\" en kies " "dan weer die \"RAID\"-opsie." #: ../iw/raid_dialog_gui.py:261 ../iw/raid_dialog_gui.py:682 #: ../textw/partition_text.py:979 msgid "Make RAID Device" msgstr "Maak RAID-toestel" #: ../iw/raid_dialog_gui.py:264 #, python-format msgid "Edit RAID Device: /dev/md%s" msgstr "Redigeer RAID-toestel: /dev/md%s" #: ../iw/raid_dialog_gui.py:266 ../textw/partition_text.py:977 msgid "Edit RAID Device" msgstr "Redigeer RAID-toestel" #: ../iw/raid_dialog_gui.py:318 msgid "RAID _Device:" msgstr "RAID-_toestel:" #: ../iw/raid_dialog_gui.py:336 msgid "RAID _Level:" msgstr "RAID-_vlak:" #: ../iw/raid_dialog_gui.py:377 msgid "_RAID Members:" msgstr "_RAID-lede:" #: ../iw/raid_dialog_gui.py:394 msgid "Number of _spares:" msgstr "Getal _spaarkomponente:" #: ../iw/raid_dialog_gui.py:404 msgid "_Format partition?" msgstr "_Formateer partisie?" #: ../iw/raid_dialog_gui.py:483 msgid "" "The source drive has no partitions to be cloned. You must first define " "partitions of type 'software RAID' on this drive before it can be cloned." msgstr "" "Daar is geen partisies in die bronaandrywer wat gekloon kan word nie. Jy " "moet eers partisies van die soort 'sagteware-RAID' op hierdie aandrywer " "definieer voor dit gekloon kan word." #: ../iw/raid_dialog_gui.py:487 ../iw/raid_dialog_gui.py:493 #: ../iw/raid_dialog_gui.py:505 ../iw/raid_dialog_gui.py:518 msgid "Source Drive Error" msgstr "Bronaandrywer-fout" #: ../iw/raid_dialog_gui.py:494 #, fuzzy msgid "" "The source drive you selected has partitions which are not of type 'software " "RAID'.\n" "\n" "You must remove these partitions before this drive can be cloned. " msgstr "" "Die gekose bronaandrywer bevat partisies wat nie van die soort 'sagteware-" "RAID' is nie.\n" "\n" "Hierdie partisies sal verwyder moet word voordat hierdie aandrywer gekloon " "kan word. " #: ../iw/raid_dialog_gui.py:506 #, fuzzy, python-format msgid "" "The source drive you selected has partitions which are not constrained to " "the drive /dev/%s.\n" "\n" "You must remove these partitions or restrict them to this drive before this " "drive can be cloned. " msgstr "" "Die gekose bronaandrywer bevat partisies wat nie alleen in die aandrywer /" "dev/%s teenwoordig is nie.\n" "\n" "Hierdie partisies sal verwyder of beperk moet word voordat hierdie aandrywer " "gekloon kan word. " #: ../iw/raid_dialog_gui.py:519 #, fuzzy msgid "" "The source drive you selected has software RAID partition(s) which are " "members of an active software RAID device.\n" "\n" "You must remove these partitions before this drive can be cloned." msgstr "" "Die gekose bronaandrywer het sagteware-RAID-partisie(s) wat lede van 'n " "aktiewe sagteware-RAID-toestel is.\n" "\n" "Hierdie partisies sal verwyder moet word voordat hierdie aandrywer gekloon " "kan word." #: ../iw/raid_dialog_gui.py:532 ../iw/raid_dialog_gui.py:538 #: ../iw/raid_dialog_gui.py:557 msgid "Target Drive Error" msgstr "Teikenaandrywer-fout" #: ../iw/raid_dialog_gui.py:533 msgid "Please select the target drives for the clone operation." msgstr "Kies die teikenaandrywers vir die kloonoperasie." #: ../iw/raid_dialog_gui.py:539 #, python-format msgid "The source drive /dev/%s cannot be selected as a target drive as well." msgstr "" "Die bronaandrywer /dev/%s kan nie as teikenaandrywer ook gekies word nie." #: ../iw/raid_dialog_gui.py:558 #, fuzzy, python-format msgid "" "The target drive /dev/%s has a partition which cannot be removed for the " "following reason:\n" "\n" "\"%s\"\n" "\n" "You must remove this partition before this drive can be a target." msgstr "" "Die teikenaandrywer /dev/%s bevat 'n partisie wat om die volgende rede nie " "verwyder kan word nie:\n" "\n" "\"%s\"\n" "\n" " Hierdie partisie sal verwyder moet word voordat daar van hierdie aandrywer " "'n teiken gemaak kan word." #: ../iw/raid_dialog_gui.py:619 msgid "Please select a source drive." msgstr "Kies 'n bronaandrywer." #: ../iw/raid_dialog_gui.py:639 #, python-format msgid "" "The drive /dev/%s will now be cloned to the following drives:\n" "\n" msgstr "" "Die aandrywer /dev/%s sal nou na die volgende aandrywers gekloon word:\n" "\n" #: ../iw/raid_dialog_gui.py:644 msgid "" "\n" "\n" "WARNING! ALL DATA ON THE TARGET DRIVES WILL BE DESTROYED." msgstr "" "\n" "\n" "WAARSKUWING! ALLE DATA OP DIE TEIKENAANDRYWERS SAL VERNIETIG WORD." #: ../iw/raid_dialog_gui.py:647 msgid "Final Warning" msgstr "Finale waarskuwing" #: ../iw/raid_dialog_gui.py:649 msgid "Clone Drives" msgstr "Kloon aandrywers" #: ../iw/raid_dialog_gui.py:658 msgid "There was an error clearing the target drives. Cloning failed." msgstr "" "Daar was fout tydens die skoonmaak van die teikenaandrywers. Kloon het " "misluk." #: ../iw/raid_dialog_gui.py:692 #, fuzzy msgid "" "Clone Drive Tool\n" "\n" "This tool allows you to significantly reduce the amount of effort required " "to setup RAID arrays. This tool uses a source drive which has been prepared " "with the desired partitioning layout, and clones this layout onto other " "similar sized drives. Then a RAID device can be created.\n" "\n" "NOTE: The source drive must have partitions which are restricted to be on " "that drive only, and can only contain unused software RAID partitions. " "Other partition types are not allowed.\n" "\n" "EVERYTHING on the target drive(s) will be destroyed by this process." msgstr "" "Kloonnutsding\n" "\n" "Hierdie nutsding stel jou in staat om die hoeveelheid moeite wat dit verg om " "RAID-reekse op te stel, wesenlik te verminder. Die idee is dat jy 'n " "bronaandrywer met die gekose partisieeruitleg voorberei word, en dat hierdie " "uitleg na ander soortgelyke aandrywers gekloon word. 'n RAID-toestel kan dan " "geskep word.\n" "\n" "LET WEL: Die bronaandrywer moet partisies hê wat tot daardie aandrywer " "alleen beperk word, en kan net ongebruikte sagteware-RAID-partisies bevat. " "Ander partisiesoorte word nie toegelaat nie.\n" "\n" "ALLES op die teikenaandrywer(s) sal deur hierdie proses vernietig word." #: ../iw/raid_dialog_gui.py:712 msgid "Source Drive:" msgstr "Bronaandrywer:" #: ../iw/raid_dialog_gui.py:720 msgid "Target Drive(s):" msgstr "Doelaandrywer(s):" #: ../iw/raid_dialog_gui.py:728 msgid "Drives" msgstr "Skywe" #: ../iw/release_notes.py:156 ../iw/release_notes.py:161 msgid "Release notes are missing.\n" msgstr "Vrystellingsaantekeninge is weg.\n" #: ../iw/release_notes.py:241 msgid "Release Notes" msgstr "Vrystellingsaantekeninge" #: ../iw/release_notes.py:244 msgid "Unable to load file!" msgstr "Kon nie lêer laai nie!" #: ../iw/task_gui.py:80 #, fuzzy, python-format msgid "" "Unable to read package metadata from repository. This may be due to a " "missing repodata directory. Please ensure that your repository has been " "correctly generated.\n" "\n" "%s" msgstr "" "Die comps-lêer in jou installeerboom kort kritieke groepe. Verseker dat jou " "installeerboom korrek gegenereer is." #: ../iw/task_gui.py:90 #, python-format msgid "" "Unable to find a group file for %s. This will prevent manual selection of " "packages from the repository from working" msgstr "" #: ../iw/task_gui.py:122 #, fuzzy msgid "Invalid Repository Name" msgstr "Ongeldige gasheernaam" #: ../iw/task_gui.py:123 #, fuzzy msgid "You must provide a repository name." msgstr "Jy moet 'n gebruikernaam verskaf" #: ../iw/task_gui.py:131 #, fuzzy msgid "Invalid Repository URL" msgstr "Ongeldige selflaaietiket" #: ../iw/task_gui.py:132 msgid "You must provide an HTTP or FTP URL to a repository." msgstr "" #: ../iw/task_gui.py:146 #, fuzzy, python-format msgid "" "The repository %s has already been added. Please choose a different " "repository name and URL." msgstr "Die hegpunt \"%s\" word reeds gebruik; kies 'n ander hegpunt." #: ../iw/timezone_gui.py:56 ../textw/timezone_text.py:89 msgid "Time Zone Selection" msgstr "Tydsone-seleksie" #: ../iw/upgrade_bootloader_gui.py:27 ../textw/upgrade_bootloader_text.py:108 msgid "Upgrade Boot Loader Configuration" msgstr "Opgradeer selflaaier-instelling" #: ../iw/upgrade_bootloader_gui.py:97 msgid "_Update boot loader configuration" msgstr "_Opdateer selflaaier-instelling" #: ../iw/upgrade_bootloader_gui.py:98 msgid "This will update your current boot loader." msgstr "Hierdie sal jou huidige selflaaier opdateer." #: ../iw/upgrade_bootloader_gui.py:102 ../textw/upgrade_bootloader_text.py:80 msgid "" "Due to system changes, your boot loader configuration can not be " "automatically updated." msgstr "" #: ../iw/upgrade_bootloader_gui.py:105 ../textw/upgrade_bootloader_text.py:84 msgid "" "The installer is unable to detect the boot loader currently in use on your " "system." msgstr "" "Die installeerder kon nie die selflaaier bespeur wat tans deur jou rekenaar " "gebruik word nie." #: ../iw/upgrade_bootloader_gui.py:112 ../textw/upgrade_bootloader_text.py:93 #, python-format msgid "" "The installer has detected the %s boot loader currently installed on %s." msgstr "" "Die installeerder het bespeur dat die %s-selflaaier op %s geïnstalleer is." #: ../iw/upgrade_bootloader_gui.py:116 msgid "This is the recommended option." msgstr "Dit is die aanbevole opsie." #: ../iw/upgrade_bootloader_gui.py:121 msgid "_Create new boot loader configuration" msgstr "_Skep nuwe selflaaier-instelling" #: ../iw/upgrade_bootloader_gui.py:123 #, fuzzy msgid "" "This option creates a new boot loader configuration. If you wish to switch " "boot loaders, you should choose this." msgstr "" "Hierdie sal jou in staat stel om 'n nuwe selflaaier-instelling te skep. As " "jy van selflaaier wil verwissel, moet jy hierdie kies." #: ../iw/upgrade_bootloader_gui.py:130 msgid "_Skip boot loader updating" msgstr "_Slaan selflaaier-opdatering oor" #: ../iw/upgrade_bootloader_gui.py:131 #, fuzzy msgid "" "This option makes no changes to boot loader configuration. If you are using " "a third party boot loader, you should choose this." msgstr "" "Hierdie sal geen verandering aan jou selflaaier-instelling doen nie. As jy " "'n derdeparty-selflaaier gebruik, moet jy hierdie kies." #: ../iw/upgrade_bootloader_gui.py:142 msgid "What would you like to do?" msgstr "Wat wil jy doen?" #: ../iw/upgrade_migratefs_gui.py:28 ../textw/upgrade_text.py:31 msgid "Migrate File Systems" msgstr "Migreer lêerstelsels" #: ../iw/upgrade_migratefs_gui.py:52 ../textw/upgrade_text.py:33 #, fuzzy, python-format msgid "" "This release of %s supports the ext3 journaling file system, which has " "several benefits over the ext2 file system traditionally shipped in %s. " "This installation program can migrate the ext2 formatted partitions to ext3 " "without data loss.\n" "\n" "Which of these partitions would you like to migrate?" msgstr "" "Hierdie uitgawe van %s werk met die ext3-joernaliseerlêerstelsel. Dit het " "verskeie voordele bo die ext2-lêerstelsel wat tradisioneel met %s verskeep " "word. Dis moontlik om die ext2-geformateerde partisies na ext3 te migreer " "sonder dataverlies.\n" "\n" "Watter van hierdie partisies wil jy migreer?" #: ../iw/upgrade_swap_gui.py:29 msgid "Upgrade Swap Partition" msgstr "Opgradeer ruilpartisie" #: ../iw/upgrade_swap_gui.py:89 ../textw/upgrade_text.py:89 #, fuzzy, python-format msgid "" "Recent kernels (2.4 or newer) need significantly more swap than older " "kernels, up to twice the amount of RAM on the system. You currently have %" "dMB of swap configured, but you may create additional swap space on one of " "your file systems now." msgstr "" "Die 2.4-kern verg heelwat meer ruilruimte as ouer kerne - so veel soos twee " "keer soveel ruilruimte as geheue op die rekenaar. Jou rekenaar is tans met %" "d megagreep ruilruimte ingestel, maar jy kan nou bykomende ruilruimte op een " "van jou lêerstelsels skep." #: ../iw/upgrade_swap_gui.py:96 #, python-format msgid "" "\n" "\n" "The installer has detected %s MB of RAM.\n" msgstr "" "\n" "\n" "Die installeerder het %s megagreep geheue bespeur.\n" #: ../iw/upgrade_swap_gui.py:108 msgid "I _want to create a swap file" msgstr "Ek _wil 'n ruillêer skep" #: ../iw/upgrade_swap_gui.py:117 msgid "Select the _partition to put the swap file on:" msgstr "Kies die _partisie waarin die ruillêer geplaas moet word op:" #: ../iw/upgrade_swap_gui.py:136 ../textw/upgrade_text.py:107 msgid "Partition" msgstr "Partisie" #: ../iw/upgrade_swap_gui.py:136 msgid "Free Space (MB)" msgstr "Oop spasie (megagreep)" #: ../iw/upgrade_swap_gui.py:154 #, fuzzy, python-format msgid "" "A minimum swap file size of %d MB is recommended. Please enter a size for " "the swap file:" msgstr "" "Ons beveel aan dat jou ruillêer ten minste %d megagreep groot moet wees. Tik " "'n grootte vir die ruillêer in:" #: ../iw/upgrade_swap_gui.py:169 msgid "Swap file _size (MB):" msgstr "Ruillêer-_grootte (megagreep):" #: ../iw/upgrade_swap_gui.py:179 msgid "I _don't want to create a swap file" msgstr "Ek wil _nie 'n ruillêer skep nie" #: ../iw/upgrade_swap_gui.py:189 #, fuzzy msgid "" "A swap file is strongly recommended. Failure to create one could cause the " "installer to abort abnormally. Are you sure you wish to continue?" msgstr "" "Ons beveel ten sterkste aan dat jy 'n ruillêer skep. As jy dit nie doen nie, " "kan die installeerder dalk abnormaal staak. Is jy seker jy wil voortgaan?" #: ../iw/upgrade_swap_gui.py:197 ../textw/upgrade_text.py:173 msgid "The swap file must be between 1 and 2000 MB in size." msgstr "Die ruillêer moet tussen 1 en 2 000 megagreep groot wees." #: ../iw/upgrade_swap_gui.py:204 ../textw/upgrade_text.py:168 msgid "" "There is not enough space on the device you selected for the swap partition." msgstr "" "Daar is nie voldoende spasie op die gekose toestel vir die ruilpartisie nie." #: ../iw/zipl_gui.py:28 msgid "z/IPL Boot Loader Configuration" msgstr "z/IPL-selflaaier-instelling" #: ../iw/zipl_gui.py:52 msgid "The z/IPL boot loader will be installed on your system." msgstr "Die z/IPL-selflaaier sal op jou rekenaar geïnstalleer word." #: ../iw/zipl_gui.py:54 msgid "" "The z/IPL Boot Loader will now be installed on your system.\n" "\n" "The root partition will be the one you selected previously in the partition " "setup.\n" "\n" "The kernel used to start the machine will be the one to be installed by " "default.\n" "\n" "If you wish to make changes later after the installation feel free to change " "the /etc/zipl.conf configuration file.\n" "\n" "You can now enter any additional kernel parameters which your machine or " "your setup may require." msgstr "" "Die z/IPL-selflaaier sal nou op jou rekenaar geïnstalleer word.\n" "\n" "Die wortelpartisie sal die een wees wat jy voorheen in die " "partisieeropstelling gekies het.\n" "\n" "Die kern wat gebruik word om die rekenaar te laat loop, sal die een wees wat " "by verstek geïnstalleer gaan word.\n" "\n" "As jy later, na die installering, veranderinge wil maak, kan jy dit doen " "deur die /etc/zipl.conf-instellinglêer te verander.\n" "\n" "Jy kan nou enige bykomende kernparameters intik wat jou rekenaar of jou " "opstelling mag vereis." #: ../iw/zipl_gui.py:81 ../textw/zipl_text.py:62 msgid "Kernel Parameters" msgstr "Kernparameters" #: ../iw/zipl_gui.py:84 ../iw/zipl_gui.py:87 msgid "Chandev Parameters" msgstr "Chandev-parameters" #: ../textw/bootloader_text.py:28 msgid "Which boot loader would you like to use?" msgstr "Watter selflaaier wil jy gebruik?" #: ../textw/bootloader_text.py:38 msgid "Use GRUB Boot Loader" msgstr "Gebruik GRUB-selflaaier" #: ../textw/bootloader_text.py:39 msgid "No Boot Loader" msgstr "Geen selflaaier nie" #: ../textw/bootloader_text.py:59 msgid "Skip Boot Loader" msgstr "Slaan selflaaier oor" #: ../textw/bootloader_text.py:60 #, fuzzy msgid "" "You have elected not to install any boot loader, which is not recommended " "unless you have an advanced need. Booting your system into Linux directly " "from the hard drive almost always requires a boot loader.\n" "\n" "Are you sure you want to skip boot loader installation?" msgstr "" "Jy het gekies om nie 'n selflaaier te installeer nie. Ons beveel sterk aan " "dat jy 'n selflaaier installeer tensy jy een of ander gevorderde behoefte " "het. 'n Selflaaier is byna altyd nodig om jou rekenaar direk van jou " "hardeskyf af na Linux te laat herselflaai.\n" "\n" "Is jy seker jy wil die selflaaier-installering oorslaan?" #: ../textw/bootloader_text.py:92 #, fuzzy msgid "" "A few systems need to pass special options to the kernel at boot time to " "function properly. If you need to pass boot options to the kernel, enter " "them now. If you don't need any or aren't sure, leave this blank." msgstr "" "Enkele rekenaars vereis dat spesiale opsies tydens selflaai na die kern " "aangegee word vir die rekenaar om behoorlik te werk. As jy selflaai-opsies " "na die kern moet aanstuur, tik hulle nou in. As jy nie enige van hierdie " "opsies benodig nie, of nie seker is nie, laat hierdie kassie leeg." #: ../textw/bootloader_text.py:101 msgid "Force use of LBA32 (not normally required)" msgstr "Dwing gebruik van LBA32 af (gewoonlik nie vereis nie)" #: ../textw/bootloader_text.py:165 msgid "Where do you want to install the boot loader?" msgstr "Waar wil jy die selflaaier installeer?" #: ../textw/bootloader_text.py:193 ../textw/bootloader_text.py:258 msgid "Boot label" msgstr "Selflaaietiket" #: ../textw/bootloader_text.py:197 msgid "Clear" msgstr "Maak leeg" #: ../textw/bootloader_text.py:205 msgid "Edit Boot Label" msgstr "Redigeer selflaaietiket" #: ../textw/bootloader_text.py:223 ../textw/bootloader_text.py:228 msgid "Invalid Boot Label" msgstr "Ongeldige selflaaietiket" #: ../textw/bootloader_text.py:224 msgid "Boot label may not be empty." msgstr "Selflaaietiket is dalk nie leeg nie." #: ../textw/bootloader_text.py:229 msgid "Boot label contains illegal characters." msgstr "Selflaaietiket bevat onwettige karakters." #: ../textw/bootloader_text.py:273 ../textw/constants_text.py:56 #: ../textw/partition_text.py:1467 msgid "Edit" msgstr "Redigeer" #: ../textw/bootloader_text.py:277 #, fuzzy, python-format msgid "" "The boot manager %s uses can boot other operating systems as well. Please " "tell me what partitions you would like to be able to boot and what label you " "want to use for each of them." msgstr "" "Die selflaaireëler wat %s gebruik, kan ander bedryfstelsels ook laat " "selflaai. Jy moet my sê watter partisies jy wil hê moet kan selflaai en " "watter etiket jy vir elk van hulle wil gebruik." #: ../textw/bootloader_text.py:290 #, fuzzy msgid "" " select | select default | delete | next screen>" msgstr "" " kies knoppie | kies verstek-selflaaiinskrywing | " "volgende skerm >" #: ../textw/bootloader_text.py:386 #, fuzzy msgid "" "A boot loader password prevents users from passing arbitrary options to the " "kernel. For highest security, you should set a password, but a password is " "not necessary for more casual users." msgstr "" "'n Selflaaier-wagwoord verhoed dat gebruikers sommer opsies na die kern " "aangegee. Vir die hoogste mate van sekuriteit beveel ons 'n wagwoord aan, " "maar dis nie nodig vir alledaagse gebruikers nie." #: ../textw/bootloader_text.py:396 msgid "Use a GRUB Password" msgstr "Gebruik 'n GRUB-wagwoord" #: ../textw/bootloader_text.py:408 msgid "Boot Loader Password:" msgstr "Selflaaier-wagwoord:" #: ../textw/bootloader_text.py:409 msgid "Confirm:" msgstr "Bevestig:" #: ../textw/bootloader_text.py:438 msgid "Passwords Do Not Match" msgstr "Wagwoorde verskil" #: ../textw/bootloader_text.py:443 msgid "Password Too Short" msgstr "Wagwoord te kort" #: ../textw/bootloader_text.py:444 msgid "Boot loader password is too short" msgstr "Selflaaier-wagwoord is te kort" #: ../textw/complete_text.py:26 msgid "" "Press to end the installation process.\n" "\n" msgstr "" "Druk om die installeerproses te beëindig.\n" "\n" #: ../textw/complete_text.py:27 msgid " to exit" msgstr " om af te sluit" #: ../textw/complete_text.py:31 #, python-format msgid "" "Congratulations, your %s installation is complete.\n" "\n" "%s%s" msgstr "" "Geluk, jou %s-installering is klaar.\n" "\n" "%s%s" #: ../textw/complete_text.py:34 #, python-format msgid "" "For information on errata (updates and bug fixes), visit http://www.redhat." "com/errata/.\n" "\n" "Information on using your system is available in the %s manuals at http://" "www.redhat.com/docs/." msgstr "" "Vir inligting oor errata (opdaterings en foutregstellings), besoek http://" "www.redhat.com/errata/.\n" "\n" "Inligting oor hoe om jou rekenaar te gebruik, is in die %s-handleidings " "beskikbaar by http://www.redhat.com/docs/." #: ../textw/complete_text.py:40 msgid "Complete" msgstr "Volledig" #: ../textw/complete_text.py:41 msgid "Reboot" msgstr "Herselflaai" #: ../textw/confirm_text.py:22 msgid "Installation to begin" msgstr "Installasie gaan begin" #: ../textw/confirm_text.py:23 #, python-format msgid "" "A complete log of your installation will be in %s after rebooting your " "system. You may want to keep this file for later reference." msgstr "" "'n Volledige staaflêer van die installering sal in %s wees nadat jou " "rekenaar geherselflaai het. Jy moet dalk hierdie lêer behou vir verdere " "verwysing." #: ../textw/confirm_text.py:26 ../textw/confirm_text.py:28 #: ../textw/confirm_text.py:54 ../textw/confirm_text.py:56 #: ../textw/constants_text.py:44 ../loader2/cdinstall.c:392 #: ../loader2/driverdisk.c:282 ../loader2/driverdisk.c:313 #: ../loader2/driverdisk.c:398 ../loader2/driverselect.c:70 #: ../loader2/driverselect.c:180 ../loader2/driverselect.c:205 #: ../loader2/hdinstall.c:265 ../loader2/hdinstall.c:319 ../loader2/kbd.c:131 #: ../loader2/loader.c:342 ../loader2/loader.c:1016 ../loader2/loader.c:1038 #: ../loader2/net.c:272 ../loader2/net.c:311 ../loader2/net.c:739 #: ../loader2/net.c:1064 ../loader2/net.c:1806 ../loader2/nfsinstall.c:57 #: ../loader2/urls.c:282 ../loader2/urls.c:470 msgid "Back" msgstr "Terug" #: ../textw/confirm_text.py:50 msgid "Upgrade to begin" msgstr "Opgradeer gaan begin" #: ../textw/confirm_text.py:51 #, python-format msgid "" "A complete log of your upgrade will be in %s after rebooting your system. " "You may want to keep this file for later reference." msgstr "" "'n Volledige staaflêer van jou opgradering sal in %s wees nadat jou rekenaar " "geherselflaai het. Jy moet dalk hierdie lêer behou vir verdere verwysing." #: ../textw/grpselect_text.py:87 #, fuzzy msgid "Please select the package groups you would like to install." msgstr "Kies watter resolusie jy wil gebruik:" #: ../textw/grpselect_text.py:105 msgid "" ",<+>,<-> selection | Group Details | next screen" msgstr "" ",<+>,<-> seleksie | Groepdetails | volgende skerm" #: ../textw/grpselect_text.py:117 #, fuzzy msgid "No optional packages to select" msgstr "Watter soort media bevat die pakkette wat geïnstalleer moet word?" #: ../textw/grpselect_text.py:139 msgid "Package Group Details" msgstr "Pakketgroep-details" #: ../textw/keyboard_text.py:38 msgid "Keyboard Selection" msgstr "Sleutelbord-seleksie" #: ../textw/keyboard_text.py:39 msgid "Which model keyboard is attached to this computer?" msgstr "Water model sleutelbord is aan hierdie rekenaar gekoppel?" #: ../textw/mouse_text.py:39 msgid "What device is your mouse located on?" msgstr "Op watter toestel is jou muis geleë?" #: ../textw/mouse_text.py:71 msgid "Which model mouse is attached to this computer?" msgstr "Water model muis is aan hierdie rekenaar gekoppel?" #: ../textw/mouse_text.py:82 msgid "Emulate 3 Buttons?" msgstr "Maak soos 3 knoppies?" #: ../textw/mouse_text.py:85 msgid "Mouse Selection" msgstr "Muisseleksie" #: ../textw/network_text.py:53 #, fuzzy, python-format msgid "" "You have not specified the field %s. Depending on your network environment " "this may cause problems later." msgstr "" "Jy het nie die veld \"%s\" gespesifiseer nie. Afhangende van jou " "netwerkomgewing kan dit dalk later probleme veroorsaak." #: ../textw/network_text.py:70 #, fuzzy, python-format msgid "IPv%d prefix must be between 0 and %d." msgstr "IP-adresse moet syfers van 1 tot 255 bevat" #: ../textw/network_text.py:74 msgid "Integer Required for Prefix" msgstr "" #: ../textw/network_text.py:75 #, python-format msgid "" "You must enter a valid integer for the %s. For IPv4, the value can be " "between 0 and 32. For IPv6 it can be between 0 and 128." msgstr "" #: ../textw/network_text.py:82 tmp/netpostconfig.glade.h:16 #, fuzzy msgid "Prefix (Netmask)" msgstr "Netmask" #: ../textw/network_text.py:84 tmp/netpostconfig.glade.h:15 #, fuzzy msgid "Prefix" msgstr "Ongeldige IP-string" #: ../textw/network_text.py:137 msgid "Activate on boot" msgstr "Aktiveer by selflaai" #: ../textw/network_text.py:144 ../loader2/net.c:719 #: tmp/netpostconfig.glade.h:9 msgid "Enable IPv4 support" msgstr "" #: ../textw/network_text.py:151 ../loader2/net.c:732 #: tmp/netpostconfig.glade.h:10 msgid "Enable IPv6 support" msgstr "" #: ../textw/network_text.py:164 msgid "P-to-P:" msgstr "" #: ../textw/network_text.py:182 tmp/netpostconfig.glade.h:7 #, fuzzy msgid "ESSID:" msgstr "_ESSID" #: ../textw/network_text.py:191 msgid "WEP Key:" msgstr "" #: ../textw/network_text.py:204 #, python-format msgid "Network Configuration for %s" msgstr "Netwerk-instelling vir %s" #: ../textw/network_text.py:241 ../textw/network_text.py:244 msgid "point-to-point IP address" msgstr "" #: ../textw/network_text.py:267 tmp/netpostconfig.glade.h:5 #, fuzzy msgid "Dynamic IP configuration (DHCP)" msgstr "Gebruik dinamiese IP-opstelling (BOOTP/DHCP)" #: ../textw/network_text.py:270 ../textw/network_text.py:401 #, fuzzy msgid "Manual address configuration" msgstr "z/IPL-instelling" #: ../textw/network_text.py:290 #, fuzzy, python-format msgid "IPv4 Configuration for %s" msgstr "Netwerk-instelling vir %s" #: ../textw/network_text.py:320 ../textw/network_text.py:332 #: ../textw/network_text.py:335 #, fuzzy msgid "IPv4 address" msgstr "IP-adres:" #: ../textw/network_text.py:324 #, fuzzy msgid "IPv4 network mask" msgstr "IP/Netmask" #: ../textw/network_text.py:350 ../textw/network_text.py:353 #: ../textw/network_text.py:356 #, fuzzy msgid "IPv4 prefix (network mask)" msgstr "Netmask" #: ../textw/network_text.py:395 tmp/netpostconfig.glade.h:4 msgid "Automatic neighbor discovery" msgstr "" #: ../textw/network_text.py:398 tmp/netpostconfig.glade.h:6 #, fuzzy msgid "Dynamic IP configuration (DHCPv6)" msgstr "Gebruik dinamiese IP-opstelling (BOOTP/DHCP)" #: ../textw/network_text.py:425 #, fuzzy, python-format msgid "IPv6 Configuration for %s" msgstr "Netwerk-instelling vir %s" #: ../textw/network_text.py:455 ../textw/network_text.py:466 #: ../textw/network_text.py:469 #, fuzzy msgid "IPv6 address" msgstr "IP-adres:" #: ../textw/network_text.py:459 ../textw/network_text.py:478 #, fuzzy msgid "IPv6 prefix" msgstr "Ongeldige IP-string" #: ../textw/network_text.py:504 #, fuzzy msgid "Configure Network Interface" msgstr "" "Daar was fout tydens die skoonmaak van die teikenaandrywers. Kloon het " "misluk." #: ../textw/network_text.py:505 #, fuzzy, python-format msgid "Would you like to configure the %s network interface in your system?" msgstr "Wil jy die netwerkkoppelvlak op hierdie rekenaar laat begin?" #: ../textw/network_text.py:519 ../textw/network_text.py:521 msgid "UNCONFIGURED" msgstr "" #: ../textw/network_text.py:530 msgid "" "The current configuration settings for each interface are listed next to the " "device name. Unconfigured interfaces are shown as UNCONFIGURED. To " "configure an interface, highlight it and choose Edit. When you are " "finished, press OK to continue." msgstr "" #: ../textw/network_text.py:620 #, fuzzy msgid "Active on boot" msgstr "Aktiveer by selflaai" #: ../textw/network_text.py:622 #, fuzzy msgid "Inactive on boot" msgstr "Aktiveer by selflaai" #: ../textw/network_text.py:625 msgid "DHCP" msgstr "" #: ../textw/network_text.py:630 msgid "Auto IPv6" msgstr "" #: ../textw/network_text.py:632 msgid "DHCPv6" msgstr "" #: ../textw/network_text.py:638 #, python-format msgid "%s, %s, %s" msgstr "" #: ../textw/network_text.py:640 ../textw/network_text.py:642 #, python-format msgid "%s, %s" msgstr "" #: ../textw/network_text.py:665 ../loader2/net.c:1025 msgid "Gateway:" msgstr "Deurgang:" #: ../textw/network_text.py:674 msgid "Primary DNS:" msgstr "Primêre DNS:" #: ../textw/network_text.py:679 msgid "Secondary DNS:" msgstr "Sekondêre DNS:" #: ../textw/network_text.py:686 msgid "Miscellaneous Network Settings" msgstr "Diverse netwerkopstelling" #: ../textw/network_text.py:703 ../textw/network_text.py:706 #, fuzzy msgid "gateway" msgstr "Deurgang" #: ../textw/network_text.py:713 ../textw/network_text.py:716 #, fuzzy msgid "primary DNS" msgstr "Primêre DNS" #: ../textw/network_text.py:725 #, fuzzy msgid "secondary DNS" msgstr "Sekondêre DNS" #: ../textw/network_text.py:759 msgid "automatically via DHCP" msgstr "outomaties met DHCP" #: ../textw/network_text.py:762 msgid "manually" msgstr "handmatig" #: ../textw/network_text.py:781 msgid "Hostname Configuration" msgstr "Gasheernaam-instelling" #: ../textw/network_text.py:784 #, fuzzy msgid "" "If your system is part of a larger network where hostnames are assigned by " "DHCP, select automatically via DHCP. Otherwise, select manually and enter a " "hostname for your system. If you do not, your system will be known as " "'localhost.'" msgstr "" "As jou rekenaar deel is van 'n groter netwerk waar gasheername deur DHCP " "toegeken word, kies outomaties met DHCP. Andersins, kies handmatig en tik 'n " "gasheernaam vir jou rekenaar in. As jy dit nie doen nie, sal jou rekenaar as " "'localhost' bekendstaan." #: ../textw/network_text.py:810 ../textw/network_text.py:816 msgid "Invalid Hostname" msgstr "Ongeldige gasheernaam" #: ../textw/network_text.py:811 msgid "You have not specified a hostname." msgstr "Jy het nie 'n gasheer gespesifiseer nie." #: ../textw/partition_text.py:43 msgid "Must specify a value" msgstr "Moet 'n waarde spesifiseer" #: ../textw/partition_text.py:46 msgid "Requested value is not an integer" msgstr "Gekose waarde is nié 'n heelgetal nie" #: ../textw/partition_text.py:48 msgid "Requested value is too large" msgstr "Gekose waarde is te groot" #: ../textw/partition_text.py:115 #, python-format msgid "RAID Device %s" msgstr "RAID-toestel %s" #: ../textw/partition_text.py:243 #, python-format msgid "Warning: %s" msgstr "Waarskuwing: %s" #: ../textw/partition_text.py:244 msgid "Modify Partition" msgstr "Wysig partisie" #: ../textw/partition_text.py:244 msgid "Add anyway" msgstr "Voeg in elk geval by" #: ../textw/partition_text.py:282 msgid "Mount Point:" msgstr "Hegpunt:" #: ../textw/partition_text.py:334 msgid "File System type:" msgstr "Lêerstelselsoort:" #: ../textw/partition_text.py:368 msgid "Allowable Drives:" msgstr "Toelaatbare aandrywers:" #: ../textw/partition_text.py:424 msgid "Fixed Size:" msgstr "Vaste grootte:" #: ../textw/partition_text.py:426 msgid "Fill maximum size of (MB):" msgstr "Vul tot maksimum grootte (megagreep):" #: ../textw/partition_text.py:430 msgid "Fill all available space:" msgstr "Vul alle beskikbaar spasie:" #: ../textw/partition_text.py:453 msgid "Start Cylinder:" msgstr "Beginsilinder:" #: ../textw/partition_text.py:466 msgid "End Cylinder:" msgstr "Endsilinder:" #: ../textw/partition_text.py:489 msgid "Volume Group:" msgstr "Volumegroep:" #: ../textw/partition_text.py:511 msgid "RAID Level:" msgstr "RAID-vlak:" #: ../textw/partition_text.py:529 msgid "RAID Members:" msgstr "RAID-lede:" #: ../textw/partition_text.py:548 msgid "Number of spares?" msgstr "Getal spaarkomponente?" #: ../textw/partition_text.py:562 msgid "File System Type:" msgstr "Lêerstelselsoort:" #: ../textw/partition_text.py:575 msgid "File System Label:" msgstr "Lêerstelsel-etiket:" #: ../textw/partition_text.py:586 msgid "File System Option:" msgstr "Lêerstelselopsie:" #: ../textw/partition_text.py:589 ../textw/partition_text.py:827 #: ../textw/partition_text.py:1064 ../textw/partition_text.py:1236 #, python-format msgid "Format as %s" msgstr "Formateer as %s" #: ../textw/partition_text.py:591 ../textw/partition_text.py:829 #: ../textw/partition_text.py:1066 ../textw/partition_text.py:1238 #, python-format msgid "Migrate to %s" msgstr "Migreer na %s" #: ../textw/partition_text.py:593 ../textw/partition_text.py:831 #: ../textw/partition_text.py:1068 ../textw/partition_text.py:1240 msgid "Leave unchanged" msgstr "Laat onveranderd" #: ../textw/partition_text.py:609 ../textw/partition_text.py:804 #: ../textw/partition_text.py:1044 ../textw/partition_text.py:1216 msgid "File System Options" msgstr "Lêerstelselopsies" #: ../textw/partition_text.py:612 msgid "" "Please choose how you would like to prepare the file system on this " "partition." msgstr "Hoe wil jy die lêerstelsel op hierdie partisie voorberei?" #: ../textw/partition_text.py:620 msgid "Check for bad blocks" msgstr "Kontroleer vir slegte blokke" #: ../textw/partition_text.py:624 msgid "Leave unchanged (preserve data)" msgstr "Laat onveranderd (behou data)" #: ../textw/partition_text.py:633 msgid "Format as:" msgstr "Formateer as:" #: ../textw/partition_text.py:653 msgid "Migrate to:" msgstr "Migreer na:" #: ../textw/partition_text.py:765 msgid "Force to be a primary partition" msgstr "Dwing om 'n primêre partisie te wees" #: ../textw/partition_text.py:782 msgid "Not Supported" msgstr "Nie ondersteun nie" #: ../textw/partition_text.py:783 #, fuzzy msgid "You can only edit LVM Volume Groups in the graphical installer." msgstr "" "LVM-volumegroepe kan net met die grafiese installeerder geredigeer word." #: ../textw/partition_text.py:859 ../textw/partition_text.py:912 msgid "Invalid Entry for Partition Size" msgstr "Ongeldige inskrywing vir partisiegrootte" #: ../textw/partition_text.py:871 msgid "Invalid Entry for Maximum Size" msgstr "Ongeldige inskrywing vir maksimum grootte" #: ../textw/partition_text.py:890 msgid "Invalid Entry for Starting Cylinder" msgstr "Ongeldige inskrywing vir beginsilinder" #: ../textw/partition_text.py:904 msgid "Invalid Entry for End Cylinder" msgstr "Ongeldige inskrywing vir endsilinder" #: ../textw/partition_text.py:1017 msgid "No RAID partitions" msgstr "Geen RAID-partisies" #: ../textw/partition_text.py:1018 msgid "At least two software RAID partitions are needed." msgstr "Ten minste twee sagteware-RAID-partisies word vereis." #: ../textw/partition_text.py:1030 ../textw/partition_text.py:1203 msgid "Format partition?" msgstr "Formateer partisie?" #: ../textw/partition_text.py:1092 msgid "Invalid Entry for RAID Spares" msgstr "Ongeldige inskrywing vir RAID-spaarkomponente" #: ../textw/partition_text.py:1107 msgid "Too many spares" msgstr "Te veel spaarkomponente" #: ../textw/partition_text.py:1108 #, fuzzy msgid "You may not use any spares with a RAID0 array." msgstr "Die maksimum getal spaarkomponente met 'n RAID0-reeks is 0." #: ../textw/partition_text.py:1189 msgid "No Volume Groups" msgstr "Geen volumegroepe nie" #: ../textw/partition_text.py:1190 #, fuzzy msgid "No volume groups exist in which to create a logical volume" msgstr "Geen volumegroepe waarin 'n logiese volume geskep kan word nie" #: ../textw/partition_text.py:1314 #, fuzzy, python-format msgid "" "The current requested size (%10.2f MB) is larger than the maximum logical " "volume size (%10.2f MB). " msgstr "" "Die huidig gekose grootte (%10.2f megagreep) is groter as die maksimum " "logiesevolume-grootte (%10.2f megagreep). " #: ../textw/partition_text.py:1333 #, python-format msgid "" "The current requested size (%10.2f MB) is larger than the available size in " "the volume group (%10.2f MB)." msgstr "" "Die huidig gekose grootte (%10.2f megagreep) is groter as die beskikbare " "grootte in die volumegroep (%10.2f megagreep)." #: ../textw/partition_text.py:1387 msgid "New Partition or Logical Volume?" msgstr "Nuwe partisie of logiese volume?" #: ../textw/partition_text.py:1388 msgid "Would you like to create a new partition or a new logical volume?" msgstr "Wil jy 'n nuwe partisie of 'n nuwe logiese volume skep?" #: ../textw/partition_text.py:1390 msgid "partition" msgstr "partisie" #: ../textw/partition_text.py:1390 msgid "logical volume" msgstr "logiese volume" #: ../textw/partition_text.py:1466 msgid "New" msgstr "Nuwe" #: ../textw/partition_text.py:1468 msgid "Delete" msgstr "Skrap" #: ../textw/partition_text.py:1469 msgid "RAID" msgstr "RAID" #: ../textw/partition_text.py:1472 msgid "" " F1-Help F2-New F3-Edit F4-Delete F5-Reset F12-OK " msgstr "" " F1-Hulp F2-Nuwe F3-Redigeer F4-Skrap F5-Terugstel F12-OK " #: ../textw/partition_text.py:1504 msgid "No Root Partition" msgstr "Geen wortelpartisie nie" #: ../textw/partition_text.py:1505 #, fuzzy msgid "Installation requires a / partition." msgstr "Kon nie gekose partisies toeken nie: %s." #: ../textw/partition_text.py:1547 #, fuzzy msgid "Partitioning Type" msgstr "Partisiesoort" #: ../textw/partition_text.py:1549 msgid "" "Installation requires partitioning of your hard drive. The default layout " "is reasonable for most users. You can either choose to use this or create " "your own." msgstr "" #: ../textw/partition_text.py:1573 msgid "Which drive(s) do you want to use for this installation?" msgstr "Watter aandrywers(s) wil jy vir hierdie installering gebruik?" #: ../textw/partition_text.py:1588 #, fuzzy msgid ",<+>,<-> selection | Add drive | next screen" msgstr "" ",<+>,<-> seleksie | Groepdetails | volgende skerm" #: ../textw/partition_text.py:1657 #, fuzzy msgid "Review Partition Layout" msgstr "Gaan _na (en wysig indien nodig) die geskepte partisies" #: ../textw/partition_text.py:1658 #, fuzzy msgid "Review and modify partitioning layout?" msgstr "Gaan _na (en wysig indien nodig) die geskepte partisies" #: ../textw/partition_text.py:1679 tmp/adddrive.glade.h:3 #, fuzzy msgid "Advanced Storage Options" msgstr "Bykomende grootteopsies" #: ../textw/partition_text.py:1680 tmp/adddrive.glade.h:5 #, fuzzy msgid "How would you like to modify your drive configuration?" msgstr "Wil jy die lêerstelsel op hierdie partisie voorberei?" #: ../textw/partition_text.py:1703 #, fuzzy msgid "Add FCP Device" msgstr "Voeg FCP-toestel by" #: ../textw/partition_text.py:1704 tmp/zfcp-config.glade.h:5 #, fuzzy msgid "" "zSeries machines can access industry-standard SCSI devices via Fibre Channel " "(FCP). You need to provide a 16 bit device number, a 64 bit World Wide Port " "Name (WWPN), and a 64 bit FCP LUN for each device." msgstr "" "zSeries-rekenaars kan toegang tot bedryfstandaard-SCSI-toestelle oor " "draadkanaal (FCP) verkry. Jy moet 5 parameters vir elke toestel verskaf: 'n " "16-bis-toestelnommer, 'n 16-bis-SCSI-ID, 'n 64-bis-wêreldwyepoort-naam " "(WWPN), 'n 16-bis-SCSI-LUN en 'n 64-bis-FCP-LUN." #: ../textw/partition_text.py:1727 tmp/iscsi-config.glade.h:5 #, fuzzy msgid "Configure iSCSI Parameters" msgstr "Chandev-parameters" #: ../textw/partition_text.py:1728 tmp/iscsi-config.glade.h:6 msgid "" "To use iSCSI disks, you must provide the address of your iSCSI target and " "the iSCSI initiator name you've configured for your host." msgstr "" #: ../textw/partition_text.py:1729 #, fuzzy msgid "Target IP Address" msgstr "IP-adres:" #: ../textw/partition_text.py:1730 #, fuzzy msgid "iSCSI Initiator Name" msgstr "Ongeldige volumegroep-naam" #: ../textw/partmethod_text.py:26 msgid "Autopartition" msgstr "Outopartisieer" #: ../textw/partmethod_text.py:27 msgid "Disk Druid" msgstr "Disk Druid" #: ../textw/progress_text.py:51 msgid "Package Installation" msgstr "Pakketinstallering" #: ../textw/task_text.py:42 #, fuzzy msgid "Package selection" msgstr "Pakketgroep-seleksie" #: ../textw/task_text.py:48 tmp/tasksel.glade.h:4 #, no-c-format, python-format msgid "" "The default installation of %s includes a set of software applicable for " "general internet usage. What additional tasks would you like your system to " "support?" msgstr "" #: ../textw/task_text.py:63 msgid "Customize software selection" msgstr "Doelmaak seleksie sagteware" #: ../textw/timezone_text.py:68 #, fuzzy msgid "In which time zone are you located?" msgstr "In watter tydsone is jy geleë?" #: ../textw/timezone_text.py:86 #, fuzzy msgid "System clock uses UTC" msgstr "Stelselklok gebruik _UTC" #: ../textw/upgrade_bootloader_text.py:88 #: ../textw/upgrade_bootloader_text.py:97 msgid "Update boot loader configuration" msgstr "Opdateer selflaaier-instelling" #: ../textw/upgrade_bootloader_text.py:100 msgid "Skip boot loader updating" msgstr "Slaan selflaaier-opdatering oor" #: ../textw/upgrade_bootloader_text.py:102 msgid "Create new boot loader configuration" msgstr "Skep nuwe selflaaier-instelling" #: ../textw/upgrade_text.py:107 msgid "Free Space" msgstr "Oop spasie" #: ../textw/upgrade_text.py:122 msgid "RAM detected (MB):" msgstr "Geheue bespeur (megagreep):" #: ../textw/upgrade_text.py:125 msgid "Suggested size (MB):" msgstr "Voorgestelde grootte (megagreep):" #: ../textw/upgrade_text.py:128 msgid "Swap file size (MB):" msgstr "Ruillêer-grootte (megagreep):" #: ../textw/upgrade_text.py:136 msgid "Add Swap" msgstr "Voeg ruilruimte by" #: ../textw/upgrade_text.py:161 msgid "The value you entered is not a valid number." msgstr "Die ingetikte waarde is nie 'n geldige syfer nie." #: ../textw/upgrade_text.py:194 msgid "Reinstall System" msgstr "Herinstalleer stelsel" #: ../textw/upgrade_text.py:203 msgid "System to Upgrade" msgstr "Rekenaar om op te gradeer" #: ../textw/upgrade_text.py:204 #, fuzzy msgid "" "There seem to be one or more existing Linux installations on your system.\n" "\n" "Please choose one to upgrade, or select 'Reinstall System' to freshly " "install your system." msgstr "" "Een of meer bestaande Linux-installasies is op jou rekenaar gevind.\n" "\n" "Kies watter een jy wil opgradeer, of kies 'Herinstalleer stelsel' om jou " "rekenaar van voor af te laat installeer." #: ../textw/userauth_text.py:27 msgid "Root Password" msgstr "Wortelwagwoord" #: ../textw/userauth_text.py:29 #, fuzzy msgid "" "Pick a root password. You must type it twice to ensure you know it and do " "not make a typing mistake. Remember that the root password is a critical " "part of system security!" msgstr "" "Kies 'n wortelwagwoord. Jy moet dit twee keer intik om te verseker dat jy " "weet wat dit is en nie 'n tikfout maak nie. Onthou, die wortelwagwoord is 'n " "kritieke onderdeel van die rekenaar se sekuriteit!" #: ../textw/userauth_text.py:60 msgid "The root password must be at least 6 characters long." msgstr "Die wortelwagwoord moet ten minste 6 karakters lank wees." #: ../textw/welcome_text.py:23 #, python-format msgid "" "Welcome to %s!\n" "\n" msgstr "" "Welkom by %s!\n" "\n" #: ../textw/zipl_text.py:26 #, fuzzy msgid "" "The z/IPL Boot Loader will be installed on your system after installation is " "complete. You can now enter any additional kernel and chandev parameters " "which your machine or your setup require." msgstr "" "Die z/IPL-selflaaier sal op jou rekenaar geïnstalleer word nadat die " "installering voltooi is. Jy kan nou enige bykomende kern- en chandev-" "parameters intik wat jou rekenaar of opstelling moontlik vereis." #: ../textw/zipl_text.py:58 msgid "z/IPL Configuration" msgstr "z/IPL-instelling" #: ../textw/zipl_text.py:66 ../textw/zipl_text.py:70 msgid "Chandev line " msgstr "Chandev-lyn " #: ../installclasses/fedora.py:15 #, fuzzy msgid "_Fedora" msgstr "_Formaat" #: ../installclasses/fedora.py:16 ../installclasses/rhel.py:22 #, python-format msgid "" "The default installation of %s includes a set of software applicable for " "general internet usage. What additional tasks would you like your system to " "include support for?" msgstr "" #: ../installclasses/fedora.py:25 msgid "Office and Productivity" msgstr "" #: ../installclasses/fedora.py:26 ../installclasses/rhel.py:35 #: ../installclasses/rhel.py:40 msgid "Software Development" msgstr "" #: ../installclasses/fedora.py:27 ../installclasses/rhel.py:39 #, fuzzy msgid "Web server" msgstr "Naambediener" #: ../installclasses/rhel.py:21 #, fuzzy msgid "Red Hat Enterprise Linux" msgstr "Red Hat Enterprise Linux WS" #: ../installclasses/rhel.py:32 msgid "Office" msgstr "" #: ../installclasses/rhel.py:33 msgid "Multimedia" msgstr "" #: ../installclasses/rhel.py:44 #, fuzzy msgid "Virtualization" msgstr "Geluk!" #: ../installclasses/rhel.py:45 msgid "Clustering" msgstr "" #: ../installclasses/rhel.py:46 msgid "Storage Clustering" msgstr "" #: ../installclasses/rhel.py:50 #, fuzzy msgid "Installation Number" msgstr "Installeertipe" #: ../installclasses/rhel.py:51 msgid "" "To install the full set of supported packages included in your subscription, " "please enter your Installation Number" msgstr "" #: ../installclasses/rhel.py:54 msgid "" "If you're unable to locate the Installation Number, consult http://www." "redhat.com/apps/support/in.html.\n" "\n" "If you skip:\n" "* You may not get access to the full set of packages included in your " "subscription.\n" "* It may result in an unsupported/uncertified installation of Red Hat " "Enterprise Linux.\n" "* You will not get software and security updates for packages not included " "in your subscription." msgstr "" #: ../loader2/cdinstall.c:92 ../loader2/cdinstall.c:113 #: ../loader2/mediacheck.c:346 msgid "Media Check" msgstr "Mediatoets" #: ../loader2/cdinstall.c:92 ../loader2/cdinstall.c:95 #: ../loader2/cdinstall.c:113 ../loader2/cdinstall.c:121 #: ../loader2/method.c:422 msgid "Test" msgstr "Toets" #: ../loader2/cdinstall.c:92 ../loader2/cdinstall.c:96 #, fuzzy msgid "Eject Disc" msgstr "Skiet CD uit" #: ../loader2/cdinstall.c:93 #, fuzzy, c-format msgid "" "Choose \"%s\" to test the disc currently in the drive, or \"%s\" to eject " "the disc and insert another for testing." msgstr "" "Kies \"%s\" om die huidige CD in die aandrywer te toets, of \"%s\" om die CD " "uit te skiet en 'n ander een in te sit en te toets." #: ../loader2/cdinstall.c:114 #, c-format msgid "" "If you would like to test additional media, insert the next disc and press " "\"%s\". Testing each disc is not strictly required, however it is highly " "recommended. Minimally, the discs should be tested prior to using them for " "the first time. After they have been successfully tested, it is not required " "to retest each disc prior to using it again." msgstr "" #: ../loader2/cdinstall.c:137 #, fuzzy, c-format msgid "" "The %s disc was not found in any of your drives. Please insert the %s disc " "and press %s to retry." msgstr "" "Die %s CD kon nie in enige van jou CD-ROM-aandrywers gevind word nie. Sit " "asseblief die %s CD in en druk %s om weer te probeer." #: ../loader2/cdinstall.c:258 #, fuzzy msgid "Disc Found" msgstr "CD gevind" #: ../loader2/cdinstall.c:259 #, fuzzy, c-format msgid "" "To begin testing the media before installation press %s.\n" "\n" "Choose %s to skip the media test and start the installation." msgstr "" "Druk %s om die CD-media te begin toets voor installering.\n" "\n" "Kies %s om die mediatoets oor te slaan en die installering te begin." #: ../loader2/cdinstall.c:379 #, fuzzy, c-format msgid "" "No %s disc was found which matches your boot media. Please insert the %s " "disc and press %s to retry." msgstr "" "Die %s CD, wat met jou laaimedia ooreenstem, kon nie gevind word nie. Sit " "asseblief die %s CD in en druk %s om weer te probeer." #: ../loader2/cdinstall.c:384 #, fuzzy, c-format msgid "" "The %s disc was not found in any of your CDROM drives. Please insert the %s " "disc and press %s to retry." msgstr "" "Die %s CD kon nie in enige van jou CD-ROM-aandrywers gevind word nie. Sit " "asseblief die %s CD in en druk %s om weer te probeer." #: ../loader2/cdinstall.c:391 #, fuzzy msgid "Disc Not Found" msgstr "CD nie gevind nie" #: ../loader2/cdinstall.c:464 msgid "Cannot find kickstart file on CDROM." msgstr "Kan nie aansitlêer op CD-ROM vind nie." #: ../loader2/copy.c:45 ../loader2/method.c:158 ../loader2/method.c:376 #, c-format msgid "Failed to read directory %s: %s" msgstr "Kon nie gids %s lees nie: %s" #: ../loader2/driverdisk.c:134 ../loader2/firewire.c:55 msgid "Loading" msgstr "Besig om te laai" #: ../loader2/driverdisk.c:134 msgid "Reading driver disk..." msgstr "Lees tans drywerskyf..." #: ../loader2/driverdisk.c:276 ../loader2/driverdisk.c:308 msgid "Driver Disk Source" msgstr "Drywerskyfbron" #: ../loader2/driverdisk.c:277 msgid "" "You have multiple devices which could serve as sources for a driver disk. " "Which would you like to use?" msgstr "" "Jy het verskeie toestelle wat as bron kan dien vir 'n drywerskyf. Watter een " "wil jy gebruik?" #: ../loader2/driverdisk.c:309 msgid "" "There are multiple partitions on this device which could contain the driver " "disk image. Which would you like to use?" msgstr "" "Daar is verskeie partisies op hierdie toestel wat die drywerskyfbeeld kan " "bevat. Watter een wil jy gebruik?" #: ../loader2/driverdisk.c:347 msgid "Failed to mount partition." msgstr "Kon nie aan partisie heg nie." #: ../loader2/driverdisk.c:355 msgid "Select driver disk image" msgstr "Kies drywerskyfbeeld" #: ../loader2/driverdisk.c:356 msgid "Select the file which is your driver disk image." msgstr "Kies die lêer wat jou drywerskyfbeeld bevat." #: ../loader2/driverdisk.c:385 msgid "Failed to load driver disk from file." msgstr "Kon nie drywerskyf vanaf lêer laai nie." #: ../loader2/driverdisk.c:396 #, c-format msgid "Insert your driver disk into /dev/%s and press \"OK\" to continue." msgstr "Sit jou drywerskyf in /dev/%s en druk \"OK\" om voort te gaan." #: ../loader2/driverdisk.c:398 msgid "Insert Driver Disk" msgstr "Steek drywerskyf in" #: ../loader2/driverdisk.c:413 msgid "Failed to mount driver disk." msgstr "Kon nie aan drywerskyf heg nie." #: ../loader2/driverdisk.c:423 #, c-format msgid "Driver disk is invalid for this release of %s." msgstr "" #: ../loader2/driverdisk.c:486 msgid "Manually choose" msgstr "Kies self" #: ../loader2/driverdisk.c:487 msgid "Load another disk" msgstr "Laai 'n ander skyf" #: ../loader2/driverdisk.c:488 msgid "" "No devices of the appropriate type were found on this driver disk. Would " "you like to manually select the driver, continue anyway, or load another " "driver disk?" msgstr "" "Geen geskikte toestelle kon op hierdie drywerskyf gevind word nie. Wil jy " "die drywer self kies, nogtans voortgaan of 'n ander drywerskyf laai?" #: ../loader2/driverdisk.c:526 msgid "Driver disk" msgstr "Drywerskyf" #: ../loader2/driverdisk.c:527 msgid "Do you have a driver disk?" msgstr "Het jy 'n drywerskyf?" #: ../loader2/driverdisk.c:536 msgid "More Driver Disks?" msgstr "Nog drywerskywe?" #: ../loader2/driverdisk.c:537 msgid "Do you wish to load any more driver disks?" msgstr "Wil jy enige ander drywerskywe laai?" #: ../loader2/driverdisk.c:583 ../loader2/driverdisk.c:620 #: ../loader2/hdinstall.c:404 ../loader2/kickstart.c:127 #: ../loader2/kickstart.c:137 ../loader2/kickstart.c:180 #: ../loader2/kickstart.c:523 ../loader2/modules.c:1036 #: ../loader2/modules.c:1049 ../loader2/net.c:1597 ../loader2/net.c:1620 #: ../loader2/nfsinstall.c:251 ../loader2/urlinstall.c:464 #: ../loader2/urlinstall.c:473 ../loader2/urlinstall.c:484 msgid "Kickstart Error" msgstr "Aansitfout" #: ../loader2/driverdisk.c:584 #, c-format msgid "Unknown driver disk kickstart source: %s" msgstr "Onbekende drywerskyf-aansitbron: %s" #: ../loader2/driverdisk.c:621 #, c-format msgid "" "The following invalid argument was specified for the kickstart driver disk " "command: %s:%s" msgstr "" "Die volgende ongeldige argument is gespesifiseer vir die bevel om die " "drywerskryf aan te sit: %s:%s" #: ../loader2/driverselect.c:60 #, fuzzy, c-format msgid "" "Please enter any parameters which you wish to pass to the %s module " "separated by spaces. If you don't know what parameters to supply, skip this " "screen by pressing the \"OK\" button." msgstr "" "Tik enige parameters wat jy aan die %s-module wil stuur in, met spasies " "tussenin. As jy nie weet water parameters om te verskaf nie, slaan hierdie " "skerm of deur die \"OK\"-knop te druk. 'n Lys geldige opsies kan bekom word " "deur die F1-sleutel te druk." #: ../loader2/driverselect.c:80 msgid "Enter Module Parameters" msgstr "Tik moduleparameters in" #: ../loader2/driverselect.c:179 msgid "No drivers found" msgstr "Geen drywers gevind nie" #: ../loader2/driverselect.c:179 msgid "Load driver disk" msgstr "Laai drywerskyf" #: ../loader2/driverselect.c:180 msgid "" "No drivers were found to manually insert. Would you like to use a driver " "disk?" msgstr "" "Geen drywers kon gevind word om self te installeer nie. Wil jy 'n drywerskyf " "gebruik?" #: ../loader2/driverselect.c:198 msgid "" "Please select the driver below which you wish to load. If it does not " "appear and you have a driver disk, press F2." msgstr "" "Kies asseblief die drywer wat jy wil laai hieronder. As dit nie verskyn nie, " "en jy 'n drywerskyf het, druk dan F2." #: ../loader2/driverselect.c:206 msgid "Specify optional module arguments" msgstr "Spesifiseer opsionele module-argumente" #: ../loader2/driverselect.c:226 msgid "Select Device Driver to Load" msgstr "Kies toesteldrywer om te laai" #: ../loader2/firewire.c:55 ../loader2/windows.c:57 #, c-format msgid "Loading %s driver..." msgstr "Besig om drywer %s te laai..." #: ../loader2/hdinstall.c:102 ../loader2/nfsinstall.c:198 #: ../loader2/urlinstall.c:151 #, c-format msgid "" "The %s installation tree in that directory does not seem to match your boot " "media." msgstr "" "Dit lyk asof die %s-installasiestruktuur in daardie gids nie ooreenstem met " "jou laaimedia nie." #: ../loader2/hdinstall.c:158 msgid "" "An error occured reading the install from the ISO images. Please check your " "ISO images and try again." msgstr "" "Daar het iets verkeerd geloop met die lees van die installasie vanaf die ISO-" "beelde. Kontroleer asseblief jou ISO-beelde en probeer weer." #: ../loader2/hdinstall.c:266 msgid "" "You don't seem to have any hard drives on your system! Would you like to " "configure additional devices?" msgstr "" "Dit lyk asof daar nie enige hardeskywe op jou rekenaar is nie! Wil jy " "bykomende toestelle opstel?" #: ../loader2/hdinstall.c:280 #, c-format msgid "" "What partition and directory on that partition hold the CD (iso9660) images " "for %s? If you don't see the disk drive you're using listed here, press F2 " "to configure additional devices." msgstr "" "In watter gids en op watter partisie is die CD (iso9660) met prente vir %s? " "As jy nie die hardeskyf wat jy gebruik in die lys sien nie, druk F2 om " "bykomende toestelle op te stel." #: ../loader2/hdinstall.c:303 msgid "Directory holding images:" msgstr "Gids met prente:" #: ../loader2/hdinstall.c:331 msgid "Select Partition" msgstr "Kies partisie" #: ../loader2/hdinstall.c:370 #, c-format msgid "Device %s does not appear to contain %s CDROM images." msgstr "Dit lyk nie asof die toestel %s enige %s CD-ROM-beelde bevat nie." #: ../loader2/hdinstall.c:405 #, c-format msgid "Bad argument to HD kickstart method command %s: %s" msgstr "Verkeerde argument vir HD-aansitmetode-bevel %s: %s" #: ../loader2/hdinstall.c:475 ../loader2/hdinstall.c:531 msgid "Cannot find kickstart file on hard drive." msgstr "Kan nie aansitlêer op hardeskyf vind nie." #: ../loader2/hdinstall.c:518 #, c-format msgid "Cannot find hard drive for BIOS disk %s" msgstr "Kan nie hardeskyf vir BIOS-skryf %s vind nie" #: ../loader2/kbd.c:129 msgid "Keyboard Type" msgstr "Soort sleutelbord" #: ../loader2/kbd.c:130 msgid "What type of keyboard do you have?" msgstr "Watter soort sleutelbord het jy?" #: ../loader2/kickstart.c:128 #, c-format msgid "Error opening kickstart file %s: %s" msgstr "Fout met oopmaak van aansitlêer %s: %s" #: ../loader2/kickstart.c:138 #, c-format msgid "Error reading contents of kickstart file %s: %s" msgstr "Fout met lees van inhoud van aansitlêer %s: %s" #: ../loader2/kickstart.c:181 #, c-format msgid "Error in %s on line %d of kickstart file %s." msgstr "Fout in %s op lyn %d van aansitlêer %s." #: ../loader2/kickstart.c:280 msgid "Cannot find ks.cfg on boot floppy." msgstr "Kan nie ks.cfg op selflaaistiffie find nie." #: ../loader2/kickstart.c:371 msgid "" "Unable to download the kickstart file. Please modify the kickstart " "parameter below or press Cancel to proceed as an interactive installation." msgstr "" #: ../loader2/kickstart.c:380 #, fuzzy msgid "Error downloading kickstart file" msgstr "Fout met oopmaak van aansitlêer %s: %s" #: ../loader2/kickstart.c:524 #, c-format msgid "Bad argument to shutdown kickstart method command %s: %s" msgstr "Verkeerde argument vir afskakelaansitmetode-bevel %s: %s" #: ../loader2/lang.c:56 #, c-format msgid "Welcome to %s - Rescue Mode" msgstr "Welkom by %s - Hulpmodus" #: ../loader2/lang.c:57 ../loader2/loader.c:159 msgid "" " / between elements | selects | next screen " msgstr "" "/ tussen elemente | selekteer | volgende skerm " #: ../loader2/lang.c:366 msgid "Choose a Language" msgstr "Kies 'n taal" #: ../loader2/loader.c:118 #, fuzzy msgid "Local CD/DVD" msgstr "Plaaslike CD-ROM" #: ../loader2/loader.c:120 msgid "Hard drive" msgstr "Hardeskyf" #: ../loader2/loader.c:121 #, fuzzy msgid "NFS directory" msgstr "%s gids:" #: ../loader2/loader.c:337 msgid "Update Disk Source" msgstr "Opdateer skyfbron" #: ../loader2/loader.c:338 msgid "" "You have multiple devices which could serve as sources for an update disk. " "Which would you like to use?" msgstr "" "Jy het verskeie toestelle wat as bron kan dien vir 'n opdateerskyf. Watter " "een wil jy gebruik?" #: ../loader2/loader.c:353 #, c-format msgid "Insert your updates disk into /dev/%s and press \"OK\" to continue." msgstr "Sit jou opdateerskyf in /dev/%s en druk \"OK\" om voort te gaan." #: ../loader2/loader.c:355 msgid "Updates Disk" msgstr "Opdateer Skyf" #: ../loader2/loader.c:367 msgid "Failed to mount updates disk" msgstr "Kon nie aan opdateerskyf heg nie" #: ../loader2/loader.c:370 msgid "Updates" msgstr "Opdaterings" #: ../loader2/loader.c:370 msgid "Reading anaconda updates..." msgstr "Lees anaconda-opdaterings..." #: ../loader2/loader.c:412 msgid "" "No hard drives have been found. You probably need to manually choose device " "drivers for the installation to succeed. Would you like to select drivers " "now?" msgstr "" "Geen hardeskywe is gevind nie. Vir die installering om suksesvol te wees, " "moet jy waarskynlik toesteldrywers met die hand kies. Wil jy nou drywers " "kies?" #: ../loader2/loader.c:849 #, c-format msgid "You do not have enough RAM to install %s on this machine." msgstr "" "Jy het nie genoeg rekenaargeheue om %s op hierdie rekenaar te installeer nie." #: ../loader2/loader.c:1008 msgid "Rescue Method" msgstr "Hulpmetode" #: ../loader2/loader.c:1009 msgid "Installation Method" msgstr "Installeermetode" #: ../loader2/loader.c:1011 msgid "What type of media contains the rescue image?" msgstr "Watter soort media bevat die hulpprent?" #: ../loader2/loader.c:1013 msgid "What type of media contains the packages to be installed?" msgstr "Watter soort media bevat die pakkette wat geïnstalleer moet word?" #: ../loader2/loader.c:1037 msgid "No driver found" msgstr "Geen drywer gevind nie" #: ../loader2/loader.c:1037 msgid "Select driver" msgstr "Kies drywer" #: ../loader2/loader.c:1038 msgid "Use a driver disk" msgstr "Gebruik 'n drywerskyf" #: ../loader2/loader.c:1039 msgid "" "Unable to find any devices of the type needed for this installation type. " "Would you like to manually select your driver or use a driver disk?" msgstr "" "Kon nie enige van die soorte toestelle vind wat vir hierdie soort " "installasie benodig word nie. Wil jy die drywer self kies of 'n drywerskyf " "gebruik?" #: ../loader2/loader.c:1258 msgid "The following devices have been found on your system." msgstr "Die volgende toestelle is op jou rekenaar gevind." #: ../loader2/loader.c:1260 msgid "" "No device drivers have been loaded for your system. Would you like to load " "any now?" msgstr "" "Geen toesteldrywers is vir jou rekenaar gelaai nie. Wil jy nou enige drywers " "laai?" #: ../loader2/loader.c:1264 msgid "Devices" msgstr "Toestelle" #: ../loader2/loader.c:1265 msgid "Done" msgstr "Klaar" #: ../loader2/loader.c:1266 msgid "Add Device" msgstr "Voeg toestel by" #: ../loader2/loader.c:1437 #, c-format msgid "loader has already been run. Starting shell.\n" msgstr "Laaier het reeds geloop. Dop word begin.\n" #: ../loader2/loader.c:1823 #, c-format msgid "Running anaconda, the %s rescue mode - please wait...\n" msgstr "Anaconda loop die %s hulpmodus - wag asseblief...\n" #: ../loader2/loader.c:1825 #, c-format msgid "Running anaconda, the %s system installer - please wait...\n" msgstr "Anaconda loop die %s rekenaarinstalleerder - wag asseblief...\n" #: ../loader2/mediacheck.c:330 msgid "" "Unable to read the disc checksum from the primary volume descriptor. This " "probably means the disc was created without adding the checksum." msgstr "" "Kon nie die skyfkontroleersyfer vanaf die primêre volume se deskriptor lees " "nie. Dit beteken waarskynlik die skyf is geskep sonder om die " "kontroleersyfer by te voeg." #: ../loader2/mediacheck.c:338 #, c-format msgid "Checking \"%s\"..." msgstr "Kontroleer nou \"%s\"..." #: ../loader2/mediacheck.c:340 #, c-format msgid "Checking media now..." msgstr "Kontroleer nou media..." #: ../loader2/mediacheck.c:387 #, c-format msgid "Unable to find install image %s" msgstr "Kon nie installeerprent %s vind nie" #: ../loader2/mediacheck.c:397 ../loader2/mediacheck.c:414 msgid "FAILED" msgstr "" #: ../loader2/mediacheck.c:398 #, fuzzy msgid "" "The image which was just tested has errors. This could be due to a corrupt " "download or a bad disc. If applicable, please clean the disc and try " "again. If this test continues to fail you should not continue the install." msgstr "" "TOETS HET MISLUK.\n" "\n" "Die prent wat sopas getoets is, het foute. Dit kan wees as gevolg van 'n " "korrupte lêer of 'n swak skyf. Maak asseblief die skyf skoon en probeer " "weer, indien van toepassing. Indien hierdie toets die heeltyd misluk, moet " "jy die installering staak." #: ../loader2/mediacheck.c:408 msgid "PASSED" msgstr "" #: ../loader2/mediacheck.c:409 #, fuzzy msgid "It is OK to install from this media." msgstr "" "TOETS HET GESLAAG.\n" "\n" "Installering kan vanaf hierdie media gedoen word." #: ../loader2/mediacheck.c:415 #, fuzzy msgid "No checksum information available, unable to verify media." msgstr "" "NIE BESKIKBAAR.\n" "\n" "Geen kontroleersyfer inligting beskikbaar nie. Kon nie media verifieer nie." #: ../loader2/mediacheck.c:420 msgid "Media Check Result" msgstr "Mediatoetsuitslae" #: ../loader2/mediacheck.c:424 #, fuzzy, c-format msgid "" "%s for the image:\n" "\n" " %s" msgstr "" "van die beeld:\n" "\n" "%s\n" "\n" #: ../loader2/mediacheck.c:428 #, c-format msgid "" "The media check %s\n" "\n" "%s" msgstr "" #: ../loader2/method.c:419 #, c-format msgid "" "Would you like to perform a checksum test of the ISO image:\n" "\n" " %s?" msgstr "" "Wil jy 'n kontroleertoets doen van ISO-beeld:\n" "\n" " %s?" #: ../loader2/method.c:422 msgid "Checksum Test" msgstr "Kontroleertoets" #: ../loader2/modules.c:1037 #, c-format msgid "Bad argument to device kickstart method command %s: %s" msgstr "Verkeerde argument vir toestelaansitmetode-bevel %s: %s" #: ../loader2/modules.c:1050 #, fuzzy msgid "" "Both module type and name must be specified for the kickstart device command." msgstr "" "Die volgende ongeldige argument is gespesifiseer vir die bevel om die " "drywerskryf aan te sit: %s:%s" #: ../loader2/net.c:59 #, c-format msgid "" "Please enter the following information:\n" "\n" " o the name or IP number of your %s server\n" " o the directory on that server containing\n" " %s for your architecture\n" msgstr "" "Tik asseblief die volgende inligting in:\n" "\n" " o die naam of IP-nommer van jou %s bediener\n" " o die gids op die bediener wat %s vir jou\n" " argitektuur bevat\n" #: ../loader2/net.c:98 msgid "" "Prefix must be between 1 and 32 for IPv4 networks or between 1 and 128 for " "IPv6 networks" msgstr "" #: ../loader2/net.c:261 #, c-format msgid "" "%s is a wireless network adapter. Please provide the ESSID and encryption " "key needed to access your wireless network. If no key is needed, leave this " "field blank and the install will continue." msgstr "" "%s is 'n draadlose netwerkkaart. Verskaf asseblief die ESSID en " "enkripsiesleutel wat bendig word vir toegang tot jou draadlose netwerk. As " "'n sleutel nie nodig is nie, kan jy hierdie veld oop los en die installering " "sal voortgaan." #: ../loader2/net.c:267 msgid "ESSID" msgstr "ESSID" #: ../loader2/net.c:268 msgid "Encryption Key" msgstr "Enkripsiesleutel" #: ../loader2/net.c:271 msgid "Wireless Settings" msgstr "Draadloos-opstelling" #: ../loader2/net.c:302 msgid "Nameserver IP" msgstr "Naambediener-IP" #: ../loader2/net.c:306 #, fuzzy msgid "Missing Nameserver" msgstr "Naambediener" #: ../loader2/net.c:307 #, fuzzy msgid "" "Your IP address request returned configuration information, but it did not " "include a nameserver address. If you do not have this information, you can " "leave the field blank and the install will continue." msgstr "" "Jou dinamiese IP-versoek het IP-opstellingsinligting opgelewer, maar dit het " "nie 'n naambediener ingesluit nie. Tik asseblief jou naambediener in, as jy " "weet wat dit is. As jy nie hierdie inligting het nie, kan jy hierdie veld " "oop los en die installering sal voortgaan." #: ../loader2/net.c:329 msgid "Invalid IP Information" msgstr "Ongeldige IP-inligting" #: ../loader2/net.c:330 msgid "You entered an invalid IP address." msgstr "Jy het 'n ongeldige IP-adres ingetik." #: ../loader2/net.c:583 ../loader2/net.c:691 #, fuzzy msgid "Network Error" msgstr "Geen wagwoord nie" #: ../loader2/net.c:584 ../loader2/net.c:692 #, fuzzy msgid "There was an error configuring your network interface." msgstr "" "Daar was fout tydens die skoonmaak van die teikenaandrywers. Kloon het " "misluk." #: ../loader2/net.c:765 msgid "Configure TCP/IP" msgstr "Bevestig TCP/IP" #: ../loader2/net.c:792 #, fuzzy msgid "You must select at least one protocol (IPv4 or IPv6)." msgstr "Jy moet ten minste een taal kies om te installeer." #: ../loader2/net.c:799 msgid "IPv4 Needed for NFS" msgstr "" #: ../loader2/net.c:800 msgid "NFS installation method requires IPv4 support." msgstr "" #: ../loader2/net.c:920 #, fuzzy msgid "IPv4 address:" msgstr "IP-adres:" #: ../loader2/net.c:932 ../loader2/net.c:984 tmp/netconfig.glade.h:1 #: tmp/netpostconfig.glade.h:1 msgid "/" msgstr "" #: ../loader2/net.c:972 #, fuzzy msgid "IPv6 address:" msgstr "IP-adres:" #: ../loader2/net.c:1033 #, fuzzy msgid "Name Server:" msgstr "Naambediener" #: ../loader2/net.c:1069 msgid "" "Enter the IPv4 and/or the IPv6 address and prefix (address / prefix). For " "IPv4, the dotted-quad netmask or the CIDR-style prefix are acceptable. The " "gateway and name server fields must be valid IPv4 or IPv6 addresses." msgstr "" #: ../loader2/net.c:1085 #, fuzzy msgid "Manual TCP/IP Configuration" msgstr "z/IPL-instelling" #: ../loader2/net.c:1193 ../loader2/net.c:1199 msgid "Missing Information" msgstr "Ontbrekende inligting" #: ../loader2/net.c:1194 #, fuzzy msgid "" "You must enter both a valid IPv4 address and a network mask or CIDR prefix." msgstr "Jy moet sowel 'n geldige IP-adres as 'n netmask intik." #: ../loader2/net.c:1200 #, fuzzy msgid "You must enter both a valid IPv6 address and a CIDR prefix." msgstr "Jy moet sowel 'n geldige IP-adres as 'n netmask intik." #: ../loader2/net.c:1505 msgid "Determining host name and domain..." msgstr "Besig om gasheernaam en domein te bepaal..." #: ../loader2/net.c:1598 #, c-format msgid "Bad argument to kickstart network command %s: %s" msgstr "Verkeerde argument vir netwerkaansit-bevel %s: %s" #: ../loader2/net.c:1621 #, c-format msgid "Bad bootproto %s specified in network command" msgstr "Verkeerde laaiprotokol %s in netwerkbevel gespesifiseer" #: ../loader2/net.c:1802 msgid "Networking Device" msgstr "Netwerktoestel" #: ../loader2/net.c:1803 msgid "" "You have multiple network devices on this system. Which would you like to " "install through?" msgstr "" "Daar is verskeie netwerktoestelle op hierdie rekenaar. Deur watter een wil " "jy die installering doen?" #: ../loader2/nfsinstall.c:47 msgid "NFS server name:" msgstr "NFS-bedienernaam:" #: ../loader2/nfsinstall.c:50 ../loader2/urls.c:313 #, c-format msgid "%s directory:" msgstr "%s gids:" #: ../loader2/nfsinstall.c:55 #, fuzzy msgid "NFS" msgstr "NIS" #: ../loader2/nfsinstall.c:56 msgid "NFS Setup" msgstr "NFS-opstelling" #: ../loader2/nfsinstall.c:126 msgid "Hostname specified with no DNS configured" msgstr "" #: ../loader2/nfsinstall.c:202 #, c-format msgid "That directory does not seem to contain a %s installation tree." msgstr "Dit lyk nie of daardie gids 'n %s installasiestruktuur bevat nie." #: ../loader2/nfsinstall.c:214 msgid "That directory could not be mounted from the server." msgstr "Daardie gids kon nie vanaf die bediener geheg word nie." #: ../loader2/nfsinstall.c:252 #, c-format msgid "Bad argument to NFS kickstart method command %s: %s" msgstr "Verkeerde argument vir NFS-aansitmetode-bevel %s: %s" #: ../loader2/telnetd.c:83 ../loader2/telnetd.c:125 msgid "Telnet" msgstr "Telnet" #: ../loader2/telnetd.c:83 msgid "Waiting for telnet connection..." msgstr "Wag vir telnetkonneksie..." #: ../loader2/telnetd.c:125 msgid "Running anaconda via telnet..." msgstr "Anaconda loop via telnet..." #: ../loader2/urlinstall.c:69 #, c-format msgid "Unable to retrieve %s://%s/%s/%s." msgstr "Kon nie %s://%s/%s/%s lees nie." #: ../loader2/urlinstall.c:143 msgid "Unable to retrieve the install image." msgstr "Kon nie die installeerprent lees nie." #: ../loader2/urlinstall.c:288 msgid "Media Detected" msgstr "Media Bespeur" #: ../loader2/urlinstall.c:289 msgid "Local installation media detected..." msgstr "Plaaslike installeermedia bespeur..." #: ../loader2/urlinstall.c:465 #, c-format msgid "Bad argument to Url kickstart method command %s: %s" msgstr "Verkeerde argument vir URL-aansitmetode-bevel %s: %s" #: ../loader2/urlinstall.c:474 msgid "Must supply a --url argument to Url kickstart method." msgstr "Jy moet 'n \"--url\"-argument verskaf vir 'n URL-aansitmetode." #: ../loader2/urlinstall.c:485 #, c-format msgid "Unknown Url method %s" msgstr "Onbekende URL-metode %s" #: ../loader2/urls.c:219 msgid "Retrieving" msgstr "Lees nou" #: ../loader2/urls.c:286 msgid "FTP" msgstr "" #: ../loader2/urls.c:291 msgid "Web" msgstr "" #: ../loader2/urls.c:308 msgid "FTP site name:" msgstr "FTP-werfnaam:" #: ../loader2/urls.c:309 msgid "Web site name:" msgstr "Webwerfnaam:" #: ../loader2/urls.c:328 msgid "Use non-anonymous ftp" msgstr "Gebruik nieanonieme ftp" #: ../loader2/urls.c:337 msgid "FTP Setup" msgstr "FTP-opstelling" #: ../loader2/urls.c:338 msgid "HTTP Setup" msgstr "HTTP-opstelling" #: ../loader2/urls.c:348 msgid "You must enter a server name." msgstr "Jy moet 'n bedienernaam intik." #: ../loader2/urls.c:353 msgid "You must enter a directory." msgstr "Jy moet 'n gidsnaam intik." #: ../loader2/urls.c:358 msgid "Unknown Host" msgstr "Onbekende gasheer" #: ../loader2/urls.c:359 #, c-format msgid "%s is not a valid hostname." msgstr "%s is nie 'n geldige gasheernaam nie." #: ../loader2/urls.c:430 msgid "" "If you are using non anonymous ftp, enter the account name and password you " "wish to use below." msgstr "" "Indien jy nieanonieme ftp gebruik - tik die gebruikernaam en wagwoord wat jy " "wil gebruik hieronder in." #: ../loader2/urls.c:435 msgid "" "If you are using a HTTP proxy server enter the name of the HTTP proxy server " "to use." msgstr "" "Tik die naam van die HTTP-instaanbediener in, indien jy van een gebruik maak." #: ../loader2/urls.c:457 msgid "Account name:" msgstr "Gebruikernaam:" #: ../loader2/urls.c:480 msgid "Further FTP Setup" msgstr "Verdere FTP-opstelling" #: ../loader2/urls.c:483 msgid "Further HTTP Setup" msgstr "Verdere HTTP-opstelling" #: ../loader2/windows.c:56 msgid "Loading SCSI driver" msgstr "Besig om SCSI-drywer te laai" #: tmp/adddrive.glade.h:1 #, fuzzy msgid "Add _ZFCP LUN" msgstr "FCP-LUN" #: tmp/adddrive.glade.h:2 msgid "Add _iSCSI target" msgstr "" #: tmp/adddrive.glade.h:4 msgid "Disable _dmraid device" msgstr "" #: tmp/adddrive.glade.h:6 #, fuzzy msgid "_Add drive" msgstr "Hardeskyf" #: tmp/addrepo.glade.h:1 msgid "Repository _URL:" msgstr "" #: tmp/addrepo.glade.h:2 msgid "Repository _name:" msgstr "" #: tmp/addrepo.glade.h:3 msgid "Add Repository" msgstr "" #: tmp/addrepo.glade.h:5 #, no-c-format msgid "" "Please provide the location where your additional software can be installed " "from. Note that this must be a valid repository for %s." msgstr "" #: tmp/addrepo.glade.h:6 msgid "_Add repository" msgstr "" #: tmp/anaconda.glade.h:1 msgid "Reboo_t" msgstr "_Herselflaai" #: tmp/anaconda.glade.h:3 msgid "_Next" msgstr "_Volgende" #: tmp/anaconda.glade.h:4 msgid "_Release Notes" msgstr "_Vrystellingsaantekeninge" #: tmp/autopart.glade.h:1 msgid "" "Installation requires partitioning of your hard drive. By default, a " "partitioning layout is chosen which is reasonable for most users. You can " "either choose to use this or create your own." msgstr "" #: tmp/autopart.glade.h:2 #, fuzzy msgid "Re_view and modify partitioning layout" msgstr "Gaan _na (en wysig indien nodig) die geskepte partisies" #: tmp/autopart.glade.h:3 #, fuzzy msgid "What drive would you like to boot this installation from?" msgstr "Watter taal wil jy graag tydens die installeerproses gebruik?" #: tmp/autopart.glade.h:4 #, fuzzy msgid "_Advanced storage configuration" msgstr "Gevorderde selflaaier-instelling" #: tmp/autopart.glade.h:5 #, fuzzy msgid "_Select the drive(s) to use for this installation." msgstr "Kies die aandrywers(s) wat vir hierdie installering gebruik moet word:" #: tmp/exn.glade.h:1 #, fuzzy msgid "Exception Info" msgstr "Uitsondering plaasgevind" #: tmp/exn.glade.h:2 msgid "Save to _Remote" msgstr "" #: tmp/exn.glade.h:4 #, fuzzy msgid "_Exception details" msgstr "Uitsondering plaasgevind" #: tmp/exn.glade.h:5 msgid "_Save to floppy" msgstr "" #: tmp/instkey.glade.h:2 #, no-c-format msgid "%(instkey)s:" msgstr "" #: tmp/instkey.glade.h:4 #, fuzzy, no-c-format msgid "Please enter your %(instkey)s." msgstr "Tik 'n volumegroep-naam in." #: tmp/iscsi-config.glade.h:1 #, fuzzy msgid "_Password:" msgstr "_Wagwoord:" #: tmp/iscsi-config.glade.h:2 msgid "_Target IP Address:" msgstr "" #: tmp/iscsi-config.glade.h:3 #, fuzzy msgid "_Username:" msgstr "Gebruikernaam" #: tmp/iscsi-config.glade.h:4 msgid "iSCSI Initiator _Name:" msgstr "" #: tmp/iscsi-config.glade.h:7 msgid "_Add target" msgstr "" #: tmp/liveinst.desktop.in.h:1 #, fuzzy msgid "Install" msgstr "_Installeer %s" #: tmp/liveinst.desktop.in.h:2 msgid "Install the live CD to your hard disk" msgstr "" #: tmp/liveinst.desktop.in.h:3 #, fuzzy msgid "Install to Hard Drive" msgstr "Installering begin" #: tmp/netconfig.glade.h:2 #, fuzzy msgid "Gateway:" msgstr "Deurgang:" #: tmp/netconfig.glade.h:3 #, fuzzy msgid "IPv4 Address:" msgstr "IP-adres" #: tmp/netconfig.glade.h:4 #, fuzzy msgid "IPv6 Address:" msgstr "IP-adres" #: tmp/netconfig.glade.h:5 #, fuzzy msgid "Nameserver:" msgstr "Naambediener" #: tmp/netconfig.glade.h:6 msgid "_Interface:" msgstr "" #: tmp/netconfig.glade.h:7 msgid "Enable IPv_4 support" msgstr "" #: tmp/netconfig.glade.h:8 msgid "Enable IPv_6 support" msgstr "" #: tmp/netconfig.glade.h:9 msgid "Enable network interface" msgstr "" #: tmp/netconfig.glade.h:10 msgid "" "This requires that you have an active network connection during the " "installation process. Please configure a network interface." msgstr "" #: tmp/netconfig.glade.h:11 #, fuzzy msgid "Use _dynamic IP configuration (DHCP)" msgstr "Gebruik dinamiese IP-opstelling (BOOTP/DHCP)" #: tmp/netpostconfig.glade.h:2 #, fuzzy msgid "Description Goes Here" msgstr "Beskrywing: %s" #: tmp/netpostconfig.glade.h:3 msgid "Hardware address: DE:AD:00:BE:EF:00" msgstr "" #: tmp/netpostconfig.glade.h:8 #, fuzzy msgid "Edit Interface" msgstr "Redigeer koppelvlak %s" #: tmp/netpostconfig.glade.h:11 #, fuzzy msgid "Encryption Key:" msgstr "Enkripsie_sleutel" #: tmp/netpostconfig.glade.h:13 #, fuzzy msgid "Manual configuration" msgstr "z/IPL-instelling" #: tmp/netpostconfig.glade.h:14 #, fuzzy msgid "Point to Point (IP):" msgstr "_Punt-tot-punt (IP)" #: tmp/tasksel.glade.h:1 #, fuzzy msgid "Customize _later" msgstr "Doelmaak" #: tmp/tasksel.glade.h:2 msgid "" "Please select any additional repositories that you want to use for software " "installation." msgstr "" #: tmp/tasksel.glade.h:5 msgid "" "You can further customize the software selection now, or after install via " "the software management application." msgstr "" #: tmp/tasksel.glade.h:6 msgid "_Add additional software repositories" msgstr "" #: tmp/tasksel.glade.h:7 #, fuzzy msgid "_Customize now" msgstr "Doelmaak" #: tmp/zfcp-config.glade.h:1 #, fuzzy msgid "Device number:" msgstr "Toestelnommer" #: tmp/zfcp-config.glade.h:2 #, fuzzy msgid "FCP LUN:" msgstr "FCP-LUN" #: tmp/zfcp-config.glade.h:3 #, fuzzy msgid "WWPN:" msgstr "_Wagwoord:" #: tmp/zfcp-config.glade.h:4 msgid "Add FCP device" msgstr "Voeg FCP-toestel by" #. generated from lang-table msgid "Afrikaans" msgstr "" #. generated from lang-table msgid "Arabic" msgstr "Arabies" #. generated from lang-table msgid "Assamese" msgstr "" #. generated from lang-table msgid "Bengali" msgstr "Bengaals" #. generated from lang-table msgid "Bengali(India)" msgstr "Bengaals (Indië)" #. generated from lang-table msgid "Bulgarian" msgstr "Bulgaars" #. generated from lang-table msgid "Catalan" msgstr "Katalaans" #. generated from lang-table msgid "Chinese(Simplified)" msgstr "Vereenvoudigde Sjinees" #. generated from lang-table msgid "Chinese(Traditional)" msgstr "Tradisionele Sjinees" #. generated from lang-table msgid "Croatian" msgstr "Kroasies" #. generated from lang-table msgid "Czech" msgstr "Tjseggies" #. generated from lang-table msgid "Danish" msgstr "Deens" #. generated from lang-table msgid "Dutch" msgstr "Nederlands" #. generated from lang-table msgid "English" msgstr "Engels" #. generated from lang-table msgid "Estonian" msgstr "Estnies" #. generated from lang-table msgid "Finnish" msgstr "Fins" #. generated from lang-table msgid "French" msgstr "Frans" #. generated from lang-table msgid "German" msgstr "Duits" #. generated from lang-table #, fuzzy msgid "Greek" msgstr "Oop" #. generated from lang-table msgid "Gujarati" msgstr "Ghoedjarati" #. generated from lang-table msgid "Hindi" msgstr "Hindi" #. generated from lang-table msgid "Hungarian" msgstr "Hongaars" #. generated from lang-table msgid "Icelandic" msgstr "Yslands" #. generated from lang-table msgid "Iloko" msgstr "" #. generated from lang-table #, fuzzy msgid "Indonesian" msgstr "Macedonies" #. generated from lang-table msgid "Italian" msgstr "Italiaans" #. generated from lang-table msgid "Japanese" msgstr "Japannees" #. generated from lang-table msgid "Kannada" msgstr "" #. generated from lang-table msgid "Korean" msgstr "Koreaans" #. generated from lang-table msgid "Macedonian" msgstr "Macedonies" #. generated from lang-table msgid "Malay" msgstr "Maleis" #. generated from lang-table #, fuzzy msgid "Malayalam" msgstr "Maleis" #. generated from lang-table #, fuzzy msgid "Marathi" msgstr "Ghoedjarati" #. generated from lang-table msgid "Norwegian" msgstr "Noors" #. generated from lang-table #, fuzzy msgid "Northern Sotho" msgstr "Noordelike Gebied" #. generated from lang-table msgid "Oriya" msgstr "" #. generated from lang-table msgid "Persian" msgstr "Persies" #. generated from lang-table msgid "Polish" msgstr "Pools" #. generated from lang-table msgid "Portuguese" msgstr "Portugees" #. generated from lang-table msgid "Portuguese(Brazilian)" msgstr "Brasiliaanse Portugees" #. generated from lang-table msgid "Punjabi" msgstr "Pandjab" #. generated from lang-table #, fuzzy msgid "Romanian" msgstr "Kroasies" #. generated from lang-table msgid "Russian" msgstr "Russies" #. generated from lang-table #, fuzzy msgid "Serbian" msgstr "Persies" #. generated from lang-table #, fuzzy msgid "Serbian(Latin)" msgstr "Persies" #. generated from lang-table msgid "Sinhala" msgstr "" #. generated from lang-table #, fuzzy msgid "Slovak" msgstr "Sloweens" #. generated from lang-table msgid "Slovenian" msgstr "Sloweens" #. generated from lang-table msgid "Spanish" msgstr "Spaans" #. generated from lang-table msgid "Swedish" msgstr "Sweeds" #. generated from lang-table msgid "Tamil" msgstr "Tamil" #. generated from lang-table msgid "Telugu" msgstr "" #. generated from lang-table msgid "Turkish" msgstr "Turks" #. generated from lang-table msgid "Ukrainian" msgstr "Oekraïens" #. generated from lang-table msgid "Vietnamese" msgstr "Viëtnamees" #. generated from lang-table msgid "Welsh" msgstr "Wallies" #. generated from lang-table msgid "Zulu" msgstr "Zulu" #~ msgid "Rebooting System" #~ msgstr "Herselflaai rekenaar" #, fuzzy #~ msgid "Re_try" #~ msgstr "Weer probeer" #, fuzzy #~ msgid "" #~ "Remove any media used during the installation process and press the " #~ "\"Reboot\" button to reboot your system.\n" #~ "\n" #~ msgstr "" #~ "Verwyder enige installeermedia (stiffies of CD-ROM) wat tydens die " #~ "installeerproses gebruik is, en druk die \"Herselflaai\"-knop om jou " #~ "rekenaar te laat herselflaai.\n" #~ "\n" #, fuzzy #~ msgid "" #~ "Remove any media used during the installation process and press " #~ "to reboot your system.\n" #~ "\n" #~ msgstr "" #~ "Verwyder enige installeermedia (stiffies of CD-ROM) wat tydens die " #~ "installeerproses gebruik is, en druk om jou rekenaar te laat " #~ "herselflaai.\n" #~ "\n" #~ msgid " to reboot" #~ msgstr " vir herselflaai" #~ msgid "NFS image" #~ msgstr "NFS-prent"