# # autopart.py - auto partitioning logic # # Jeremy Katz # # Copyright 2001-2005 Red Hat, Inc. # # This software may be freely redistributed under the terms of the GNU # library public license. # # You should have received a copy of the GNU Library Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. # import parted import math import copy import string, sys import fsset import lvm from partitioning import * import partedUtils import partRequests from constants import * from partErrors import * from rhpl.translate import _, N_ from rhpl.log import log PARTITION_FAIL = -1 PARTITION_SUCCESS = 0 BOOT_ABOVE_1024 = -1 BOOTEFI_NOT_VFAT = -2 BOOTALPHA_NOT_BSD = -3 BOOTALPHA_NO_RESERVED_SPACE = -4 BOOTIPSERIES_TOO_HIGH = -5 DEBUG_LVM_GROW = 0 # check that our "boot" partition meets necessary constraints unless # the request has its ignore flag set def bootRequestCheck(requests, diskset): reqs = requests.getBootableRequest() if not reqs: return PARTITION_SUCCESS for req in reqs: if not req.device or req.ignoreBootConstraints: return PARTITION_SUCCESS # side effect: dev is left as the last in devs part = partedUtils.get_partition_by_name(diskset.disks, req.device) if not part: return PARTITION_SUCCESS if iutil.getArch() == "ia64": if (part.fs_type.name != "FAT" and part.fs_type.name != "fat16" and part.fs_type.name != "fat32"): return BOOTEFI_NOT_VFAT pass elif iutil.getArch() == "i386": if partedUtils.end_sector_to_cyl(part.geom.dev, part.geom.end) >= 1024: return BOOT_ABOVE_1024 elif iutil.getArch() == "alpha": return bootAlphaCheckRequirements(part, diskset) elif (iutil.getPPCMachine() == "pSeries" or iutil.getPPCMachine() == "iSeries"): for req in reqs: part = partedUtils.get_partition_by_name(diskset.disks, req.device) if part and ((part.geom.end * part.geom.dev.sector_size / (1024.0 * 1024)) > 4096): return BOOTIPSERIES_TOO_HIGH return PARTITION_SUCCESS # Alpha requires a BSD partition to boot. Since we can be called after: # # - We re-attached an existing /boot partition (existing dev.drive) # - We create a new one from a designated disk (no dev.drive) # - We auto-create a new one from a designated set of disks (dev.drive # is a list) # # it's simpler to get disk the partition belong to through dev.device # Some other tests pertaining to a partition where /boot resides are: # # - There has to be at least 1 MB free at the begining of the disk # (or so says the aboot manual.) def bootAlphaCheckRequirements(part, diskset): disk = part.disk # Disklabel check if not disk.type.name == "bsd": return BOOTALPHA_NOT_BSD # The first free space should start at the begining of the drive # and span for a megabyte or more. free = disk.next_partition() while free: if free.type & parted.PARTITION_FREESPACE: break free = disk.next_partition(free) if (not free or free.geom.start != 1L or partedUtils.getPartSizeMB(free) < 1): return BOOTALPHA_NO_RESERVED_SPACE return PARTITION_SUCCESS def printNewRequestsCyl(diskset, newRequest): for req in newRequest.requests: if req.type != REQUEST_NEW: continue part = partedUtils.get_partition_by_name(diskset.disks, req.device) ## print req ## print "Start Cyl:%s End Cyl: %s" % (partedUtils.start_sector_to_cyl(part.geom.dev, part.geom.start), ## partedUtils.end_sector_to_cyl(part.geom.dev, part.geom.end)) def printFreespaceitem(part): return partedUtils.get_partition_name(part), part.geom.start, part.geom.end, partedUtils.getPartSizeMB(part) def printFreespace(free): print "Free Space Summary:" for drive in free.keys(): print "On drive ",drive for part in free[drive]: print "Freespace:", printFreespaceitem(part) def findFreespace(diskset): free = {} for drive in diskset.disks.keys(): disk = diskset.disks[drive] free[drive] = [] part = disk.next_partition() while part: if part.type & parted.PARTITION_FREESPACE: free[drive].append(part) part = disk.next_partition(part) return free def bestPartType(disk, request): numPrimary = len(partedUtils.get_primary_partitions(disk)) maxPrimary = disk.max_primary_partition_count if numPrimary == maxPrimary: raise PartitioningError, "Unable to create additional primary partitions on /dev/%s" % (disk.dev.path[5:]) if request.primary: return parted.PARTITION_PRIMARY if ((numPrimary == (maxPrimary - 1)) and not disk.extended_partition and disk.type.check_feature(parted.DISK_TYPE_EXTENDED)): return parted.PARTITION_EXTENDED return parted.PARTITION_PRIMARY class partlist: def __init__(self): self.parts = [] def __str__(self): retval = "" for p in self.parts: retval = retval + "\t%s %s %s\n" % (partedUtils.get_partition_name(p), partedUtils.get_partition_file_system_type(p), partedUtils.getPartSizeMB(p)) return retval def reset(self): dellist = [] for part in self.parts: dellist.append(part) for part in dellist: self.parts.remove(part) del part self.parts = [] # first step of partitioning voodoo # partitions with a specific start and end cylinder requested are # placed where they were asked to go def fitConstrained(diskset, requests, primOnly=0, newParts = None): for request in requests.requests: if request.type != REQUEST_NEW: continue if request.device: continue if primOnly and not request.primary and not requests.isBootable(request): continue if request.drive and (request.start != None): if not request.end and not request.size: raise PartitioningError, "Tried to create constrained partition without size or end" fsType = request.fstype.getPartedFileSystemType() disk = diskset.disks[request.drive[0]] if not disk: # this shouldn't happen raise PartitioningError, "Selected to put partition on non-existent disk!" startSec = partedUtils.start_cyl_to_sector(disk.dev, request.start) if request.end: endCyl = request.end elif request.size: endCyl = partedUtils.end_sector_to_cyl(disk.dev, ((1024L * 1024L * request.size) / disk.dev.sector_size) + startSec) endSec = partedUtils.end_cyl_to_sector(disk.dev, endCyl) if endSec > disk.dev.length: raise PartitioningError, "Unable to create partition which extends beyond the end of the disk." # XXX need to check overlaps properly here if startSec < 0: startSec = 0L if disk.type.check_feature(parted.DISK_TYPE_EXTENDED) and disk.extended_partition: if (disk.extended_partition.geom.start < startSec) and (disk.extended_partition.geom.end >= endSec): partType = parted.PARTITION_LOGICAL if request.primary: # they've required a primary and we can't do it return PARTITION_FAIL # check to make sure we can still create more logical parts if (len(partedUtils.get_logical_partitions(disk)) == partedUtils.get_max_logical_partitions(disk)): return PARTITION_FAIL else: partType = parted.PARTITION_PRIMARY else: # XXX need a better way to do primary vs logical stuff ret = bestPartType(disk, request) if ret == PARTITION_FAIL: return ret if ret == parted.PARTITION_PRIMARY: partType = parted.PARTITION_PRIMARY elif ret == parted.PARTITION_EXTENDED: newp = disk.partition_new(parted.PARTITION_EXTENDED, None, startSec, endSec) constraint = disk.dev.constraint_any() disk.add_partition(newp, constraint) disk.maximize_partition (newp, constraint) newParts.parts.append(newp) requests.nextUniqueID = requests.nextUniqueID + 1 partType = parted.PARTITION_LOGICAL else: # shouldn't get here raise PartitioningError, "Impossible partition type to create" newp = disk.partition_new (partType, fsType, startSec, endSec) constraint = disk.dev.constraint_any () try: disk.add_partition (newp, constraint) except parted.error, msg: return PARTITION_FAIL # raise PartitioningError, msg for flag in request.fstype.getPartedPartitionFlags(): if not newp.is_flag_available(flag): disk.delete_partition(newp) raise PartitioningError, ("requested FileSystemType needs " "a flag that is not available.") newp.set_flag(flag, 1) request.device = fsset.PartedPartitionDevice(newp).getDevice() request.currentDrive = request.drive[0] newParts.parts.append(newp) return PARTITION_SUCCESS # get the list of the "best" drives to try to use... # if currentdrive is set, use that, else use the drive list, or use # all the drives def getDriveList(request, diskset): if request.currentDrive: drives = request.currentDrive elif request.drive: drives = request.drive else: drives = diskset.disks.keys() if not type(drives) == type([]): drives = [ drives ] drives.sort() return drives # fit partitions of a specific size with or without a specific disk # into the freespace def fitSized(diskset, requests, primOnly = 0, newParts = None): todo = {} for request in requests.requests: if request.type != REQUEST_NEW: continue if request.device: continue if primOnly and not request.primary and not requests.isBootable(request): continue if request.size == 0 and request.requestSize == 0: request.requestSize = 1 if requests.isBootable(request): drives = getDriveList(request, diskset) numDrives = 0 # allocate bootable requests first # FIXME: this is a hack to make sure prep boot is even more first if request.fstype == fsset.fileSystemTypeGet("PPC PReP Boot"): numDrives = -1 if request.fstype == fsset.fileSystemTypeGet("Apple Bootstrap"): numDrives = -1 else: drives = getDriveList(request, diskset) numDrives = len(drives) if not todo.has_key(numDrives): todo[numDrives] = [ request ] else: todo[numDrives].append(request) number = todo.keys() number.sort() free = findFreespace(diskset) for num in number: for request in todo[num]: # print "\nInserting ->",request if requests.isBootable(request): isBoot = 1 else: isBoot = 0 largestPart = (0, None) drives = getDriveList(request, diskset) # log("Trying drives to find best free space out of", free) for drive in drives: # this request is bootable and we've found a large enough # partition already, so we don't need to keep trying other # drives. this keeps us on the first possible drive if isBoot and largestPart[1]: break ## print "Trying drive", drive disk = diskset.disks[drive] numPrimary = len(partedUtils.get_primary_partitions(disk)) numLogical = len(partedUtils.get_logical_partitions(disk)) # if there is an extended partition add it in if disk.extended_partition: numPrimary = numPrimary + 1 maxPrimary = disk.max_primary_partition_count maxLogical = partedUtils.get_max_logical_partitions(disk) for part in free[drive]: # if this is a free space outside extended partition # make sure we have free primary partition slots if not part.type & parted.PARTITION_LOGICAL: if numPrimary == maxPrimary: continue else: if numLogical == maxLogical: continue # log( "Trying partition %s" % (printFreespaceitem(part),)) partSize = partedUtils.getPartSizeMB(part) # figure out what the request size will be given the # geometry (#130885) requestSectors = long((request.requestSize * 1024L * 1024L) / part.disk.dev.sector_size) - 1 requestSizeMB = long((requestSectors * part.disk.dev.sector_size) / 1024L / 1024L) # log("partSize %s request %s" % (partSize, request.requestSize)) if partSize >= requestSizeMB and partSize > largestPart[0]: if not request.primary or (not part.type & parted.PARTITION_LOGICAL): largestPart = (partSize, part) if isBoot: break if not largestPart[1]: # if the request has a size of zero, it can be allowed to not # exist without any problems if request.size > 0: return PARTITION_FAIL else: request.device = None request.currentDrive = None continue # raise PartitioningError, "Can't fulfill request for partition: \n%s" %(request) # log( "largestPart is %s" % (largestPart,)) freespace = largestPart[1] freeStartSec = freespace.geom.start freeEndSec = freespace.geom.end dev = freespace.geom.dev disk = freespace.disk startSec = freeStartSec endSec = startSec + long(((request.requestSize * 1024L * 1024L) / disk.dev.sector_size)) - 1 if endSec > freeEndSec: endSec = freeEndSec if startSec < freeStartSec: startSec = freeStartSec if freespace.type & parted.PARTITION_LOGICAL: partType = parted.PARTITION_LOGICAL else: # XXX need a better way to do primary vs logical stuff ret = bestPartType(disk, request) if ret == PARTITION_FAIL: return ret if ret == parted.PARTITION_PRIMARY: partType = parted.PARTITION_PRIMARY elif ret == parted.PARTITION_EXTENDED: newp = disk.partition_new(parted.PARTITION_EXTENDED, None, startSec, endSec) constraint = dev.constraint_any() disk.add_partition(newp, constraint) disk.maximize_partition (newp, constraint) newParts.parts.append(newp) requests.nextUniqueID = requests.nextUniqueID + 1 partType = parted.PARTITION_LOGICAL # now need to update freespace since adding extended # took some space found = 0 part = disk.next_partition() while part: if part.type & parted.PARTITION_FREESPACE: if part.geom.start > freeStartSec and part.geom.end <= freeEndSec: found = 1 freeStartSec = part.geom.start freeEndSec = part.geom.end break part = disk.next_partition(part) if not found: raise PartitioningError, "Could not find free space after making new extended partition" startSec = freeStartSec endSec = startSec + long(((request.requestSize * 1024L * 1024L) / disk.dev.sector_size)) - 1 if endSec > freeEndSec: endSec = freeEndSec if startSec < freeStartSec: startSec = freeStartSec else: # shouldn't get here raise PartitioningError, "Impossible partition to create" fsType = request.fstype.getPartedFileSystemType() # log("creating newp with start=%s, end=%s, len=%s" % (startSec, endSec, endSec - startSec)) newp = disk.partition_new (partType, fsType, startSec, endSec) constraint = dev.constraint_any () try: disk.add_partition (newp, constraint) except parted.error, msg: return PARTITION_FAIL # raise PartitioningError, msg for flag in request.fstype.getPartedPartitionFlags(): if not newp.is_flag_available(flag): disk.delete_partition(newp) raise PartitioningError, ("requested FileSystemType needs " "a flag that is not available.") newp.set_flag(flag, 1) request.device = fsset.PartedPartitionDevice(newp).getDevice() drive = newp.geom.dev.path[5:] request.currentDrive = drive newParts.parts.append(newp) free = findFreespace(diskset) return PARTITION_SUCCESS # grow logical partitions # # do this ONLY after all other requests have been allocated # we just go through and adjust the size for the logical # volumes w/o rerunning process partitions # def growLogicalVolumes(diskset, requests): if requests is None or diskset is None: return # iterate over each volume group, grow logical volumes in each for vgreq in requests.requests: if vgreq.type != REQUEST_VG: continue # print "In growLogicalVolumes, considering VG ", vgreq log("In growLogicalVolumes, considering VG %s", vgreq) lvreqs = requests.getLVMLVForVG(vgreq) if lvreqs is None or len(lvreqs) < 1: # print "Apparently it had no logical volume requests, skipping..." log("Apparently it had no logical volume requests, skipping...") continue # come up with list of logvol that are growable growreqs = [] for lvreq in lvreqs: if lvreq.grow: growreqs.append(lvreq) # bail if none defined if len(growreqs) < 1: log("No growable logical volumes defined in VG %s.", vgreq) continue log("VG %s has these growable logical volumes: %s", vgreq.volumeGroupName, reduce(lambda x,y: x + [y.uniqueID], growreqs, [])) # print "VG %s has these growable logical volumes: %s" % (vgreq.volumeGroupName, growreqs) # get remaining free space if DEBUG_LVM_GROW: vgfree = lvm.getVGFreeSpace(vgreq, requests, diskset) log("Free space in VG after initial partition formation = %s", (vgfree,)) # store size we are starting at initsize = {} cursize = {} for req in growreqs: size = req.getActualSize(requests, diskset) size = lvm.clampPVSize(size, vgreq.pesize) initsize[req.logicalVolumeName] = size cursize[req.logicalVolumeName] = size if req.maxSizeMB: req.maxSizeMB = lvm.clampPVSize(req.maxSizeMB, vgreq.pesize) # print "init sizes",req.logicalVolumeName, size if DEBUG_LVM_GROW: log("init sizes for %s: %s",req.logicalVolumeName, size) # now dolly out free space to all growing LVs bailcount = 0 while 1: nochange = 1 completed = [] for req in growreqs: # print "considering ",req.logicalVolumeName, req.getStartSize() if DEBUG_LVM_GROW: log("considering %s, start size = %s",req.logicalVolumeName, req.getStartSize()) # get remaining free space vgfree = lvm.getVGFreeSpace(vgreq, requests, diskset) # print "vgfree = ", vgfree if DEBUG_LVM_GROW: log("Free space in VG = %s",vgfree) # compute fraction of remaining requests this # particular request represents totsize = 0.0 for otherreq in growreqs: if otherreq in completed: continue if DEBUG_LVM_GROW: log("adding in %s %s %s", otherreq.logicalVolumeName, otherreq.getStartSize(), otherreq.maxSizeMB) # print "adding in ", otherreq.logicalVolumeName, otherreq.getStartSize(), otherreq.maxSizeMB size = otherreq.getActualSize(requests, diskset) if otherreq.maxSizeMB: if size < otherreq.maxSizeMB: totsize = totsize + otherreq.getStartSize() else: if DEBUG_LVM_GROW: log("%s is now at %s, and passed maxsize of %s", otherreq.logicalVolumeName, size, otherreq.maxSizeMB) else: totsize = totsize + otherreq.getStartSize() if DEBUG_LVM_GROW: log("totsize -> %s",totsize) # print "totsize ->", totsize # if totsize is zero we have no growable reqs left if totsize == 0: break fraction = float(req.getStartSize())/float(totsize) newsize = lvm.clampPVSize(vgfree*fraction, vgreq.pesize) newsize += cursize[req.logicalVolumeName] if req.maxSizeMB: newsize = min(newsize, req.maxSizeMB) req.size = newsize if req.size != cursize[req.logicalVolumeName]: nochange = 0 cursize[req.logicalVolumeName] = req.size # print req.logicalVolumeName, req.size, vgfree, fraction if DEBUG_LVM_GROW: log("Name, size, cursize, vgfree, fraction = %s %s %s %s %s", req.logicalVolumeName, req.size, cursize[req.logicalVolumeName], vgfree, fraction) completed.append(req) if nochange: log("In growLogicalVolumes, no changes in size so breaking") break bailcount = bailcount + 1 if bailcount > 10: log("In growLogicalVolumes, bailing after 10 interations.") break # grow partitions def growParts(diskset, requests, newParts): # returns free space segments for each drive IN SECTORS def getFreeSpace(diskset): free = findFreespace(diskset) freeSize = {} # find out the amount of free space on each drive for key in free.keys(): if len(free[key]) == 0: del free[key] continue freeSize[key] = 0 for part in free[key]: freeSize[key] = freeSize[key] + partedUtils.getPartSize(part) return (free, freeSize) #### # start of growParts #### newRequest = requests.copy() ## print "new requests" ## printNewRequestsCyl(diskset, requests) ## print "orig requests" ## printNewRequestsCyl(diskset, newRequest) ## print "\n\n\n" (free, freeSize) = getFreeSpace(diskset) # find growable partitions growable = {} growSize = {} origSize = {} for request in newRequest.requests: if request.type != REQUEST_NEW or not request.grow: continue origSize[request.uniqueID] = request.requestSize if not growable.has_key(request.currentDrive): growable[request.currentDrive] = [ request ] else: growable[request.currentDrive].append(request) # there aren't any drives with growable partitions, this is easy! if not growable.keys(): return PARTITION_SUCCESS ## print "new requests before looping" ## printNewRequestsCyl(diskset, requests) ## print "\n\n\n" # loop over all drives, grow all growable partitions one at a time grownList = [] for drive in growable.keys(): # no free space on this drive, so can't grow any of its parts if not free.has_key(drive): continue # process each request # grow all growable partitions on this drive until all can grow no more donegrowing = 0 outer_iter = 0 lastFreeSize = None while not donegrowing and outer_iter < 20: # if less than one sector left, we're done # if drive not in freeSize.keys() or freeSize[drive] == lastFreeSize: if drive not in freeSize.keys(): # print "leaving outer loop because no more space on %s\n\n" % drive break ## print "\nAt start:" ## print drive,freeSize.keys() ## print freeSize[drive], lastFreeSize ## print "\n" ## print diskset.diskState() outer_iter = outer_iter + 1 donegrowing = 1 # pull out list of requests we want to grow on this drive growList = growable[drive] sector_size = diskset.disks[drive].dev.sector_size cylsectors = diskset.disks[drive].dev.sectors*diskset.disks[drive].dev.heads # sort in order of request size, consider biggest first n = 0 while n < len(growList): for request in growList: if request.size < growList[n].size: tmp = growList[n] index = growList.index(request) growList[n] = request growList[index] = tmp n = n + 1 # recalculate the total size of growable requests for this drive # NOTE - we add up the ORIGINAL requested sizes, not grown sizes growSize[drive] = 0 for request in growList: if request.uniqueID in grownList: continue growSize[drive] = growSize[drive] + origSize[request.uniqueID] thisFreeSize = getFreeSpace(diskset)[1] # loop over requests for this drive for request in growList: # skip if we've finished growing this request if request.uniqueID in grownList: continue if drive not in freeSize.keys(): donegrowing = 1 # print "leaving inner loop because no more space on %s\n\n" % drive break ## print "\nprocessing ID",request.uniqueID, request.mountpoint ## print "growSize, freeSize = ",growSize[drive], freeSize[drive] donegrowing = 0 # get amount of space actually used by current allocation part = partedUtils.get_partition_by_name(diskset.disks, request.device) startSize = partedUtils.getPartSize(part) # compute fraction of freespace which to give to this # request. Weight by original request size percent = origSize[request.uniqueID] / (growSize[drive] * 1.0) growby = long(percent * thisFreeSize[drive]) if growby < cylsectors: growby = cylsectors; maxsect = startSize + growby ## print request ## print "percent, growby, maxsect, free", percent, growby, maxsect,freeSize[drive], startSize, lastFreeSize ## print "max is ",maxsect imposedMax = 0 if request.maxSizeMB: # round down a cylinder, see comment below tmpint = request.maxSizeMB*1024.0*1024.0/sector_size tmpint = long(tmpint / cylsectors) maxUserSize = tmpint * cylsectors if maxsect > maxUserSize: maxsect = long(maxUserSize) imposedMax = 1 else: # XXX HACK enforce silent limit for swap otherwise it # can grow up to 2TB! if request.fstype.name == "swap": (xxxint, tmpint) = iutil.swapSuggestion(quiet=1) # convert to sectors tmpint = tmpint*1024*1024/sector_size tmpint = long(tmpint / cylsectors) maxsugswap = tmpint * cylsectors userstartsize = origSize[request.uniqueID]*1024*1024/sector_size if maxsugswap >= userstartsize: maxsect = maxsugswap imposedMax = 1 log("Enforced max swap size of %s based on suggested max swap", maxsect) # round max fs limit down a cylinder, helps when growing # so we don't end up with a free cylinder at end if # maxlimit fell between cylinder boundaries tmpint = request.fstype.getMaxSizeMB()*1024.0*1024.0/sector_size tmpint = long(tmpint / cylsectors) maxFSSize = tmpint * cylsectors if maxsect > maxFSSize: maxsect = long(maxFSSize) imposedMax = 1 ## print "freesize, max = ",freeSize[drive],maxsect ## print "startsize = ",startSize min = startSize max = maxsect diff = max - min cur = max - (diff / 2) lastDiff = 0 # binary search ## print "start min, max, cur, diffs = ",min,max,cur,diff,lastDiff inner_iter = 0 ret = PARTITION_SUCCESS # request succeeded with initial size while (max != min) and (lastDiff != diff) and (inner_iter < 2000): ## printNewRequestsCyl(diskset, newRequest) # XXX need to request in sectors preferably, more accurate ## print "trying cur=%s" % cur request.requestSize = (cur*sector_size)/1024.0/1024.0 # try adding (ret, msg) = processPartitioning(diskset, newRequest, newParts) ## if ret == PARTITION_FAIL: ## print "!!!!!!!!!!! processPartitioning failed - %s" % msg if ret == PARTITION_SUCCESS: min = cur else: max = cur lastDiff = diff diff = max - min # print min, max, diff, cylsectors # print diskset.diskState() cur = max - (diff / 2) inner_iter = inner_iter + 1 # print "sizes at end of loop - cur: %s min:%s max:%s diff:%s lastDiff:%s" % (cur,min,max,diff,lastDiff) # freeSize[drive] = freeSize[drive] - (min - startSize) # print "shrinking freeSize to ",freeSize[drive], lastFreeSize # if freeSize[drive] < 0: # print "freesize < 0!" # freeSize[drive] = 0 # we could have failed on the last try, in which case we # should go back to the smaller size if ret == PARTITION_FAIL: # print "growing finally failed at size", min request.requestSize = min*sector_size/1024.0/1024.0 # XXX this can't fail (?) (retxxx, msgxxx) = processPartitioning(diskset, newRequest, newParts) # print "end min, max, cur, diffs = ",min,max,cur,diff,lastDiff # print "%s took %s loops" % (request.mountpoint, inner_iter) lastFreeSize = freeSize[drive] (free, freeSize) = getFreeSpace(diskset) # printFreespace(free) if ret == PARTITION_FAIL or (max == maxsect and imposedMax): # print "putting ",request.uniqueID,request.mountpoint," in grownList" grownList.append(request.uniqueID) growSize[drive] = growSize[drive] - origSize[request.uniqueID] if growSize[drive] < 0: # print "growsize < 0!" growSize[drive] = 0 return PARTITION_SUCCESS def setPreexistParts(diskset, requests, newParts): for request in requests: if request.type != REQUEST_PREEXIST: continue if not diskset.disks.has_key(request.drive): log("pre-existing partition on non-native disk %s, ignoring" %(request.drive,)) continue disk = diskset.disks[request.drive] part = disk.next_partition() while part: if part.geom.start == request.start and part.geom.end == request.end: request.device = partedUtils.get_partition_name(part) if request.fstype: if request.fstype.getName() != request.origfstype.getName(): if part.is_flag_available(parted.PARTITION_RAID): if request.fstype.getName() == "software RAID": part.set_flag(parted.PARTITION_RAID, 1) else: part.set_flag(parted.PARTITION_RAID, 0) if part.is_flag_available(parted.PARTITION_LVM): if request.fstype.getName() == "physical volume (LVM)": part.set_flag(parted.PARTITION_LVM, 1) else: part.set_flag(parted.PARTITION_LVM, 0) partedUtils.set_partition_file_system_type(part, request.fstype) break part = disk.next_partition(part) def deletePart(diskset, delete): disk = diskset.disks[delete.drive] part = disk.next_partition() while part: if part.geom.start == delete.start and part.geom.end == delete.end: disk.delete_partition(part) return part = disk.next_partition(part) def processPartitioning(diskset, requests, newParts): # collect a hash of all the devices that we have created extended # partitions on. When we remove these extended partitions the logicals # (all of which we created) will be destroyed along with it. extendeds = {} for part in newParts.parts: if part.type == parted.PARTITION_EXTENDED: extendeds[part.geom.dev.path] = None # Go through the list again and check for each logical partition we have. # If we created the extended partition on the same device as the logical # partition, remove it from out list, as it will be cleaned up for us # when the extended partition gets removed. dellist = [] for part in newParts.parts: if (part.type & parted.PARTITION_LOGICAL and extendeds.has_key(part.geom.dev.path)): dellist.append(part) for part in dellist: newParts.parts.remove(part) # Finally, remove all of the partitions we added in the last try from # the disks. We'll start again from there. for part in newParts.parts: part.disk.delete_partition(part) newParts.reset() for request in requests.requests: if request.type == REQUEST_NEW: request.device = None setPreexistParts(diskset, requests.requests, newParts) # sort requests by size requests.sortRequests() # partitioning algorithm in simplistic terms # # we want to allocate partitions such that the most specifically # spelled out partitions get what they want first in order to ensure # they don't get preempted. first conflict found returns an error # which must be handled by the caller by saying that the partition # add is impossible (XXX can we get an impossible situation after delete?) # # potentially confusing terms # type == primary vs logical # # order to allocate: # start and end cylinders given (note that start + size & !grow is equivalent) # drive, partnum # drive, type # drive # priority partition (/boot or /) # size # run through with primary only constraints first ret = fitConstrained(diskset, requests, 1, newParts) if ret == PARTITION_FAIL: return (ret, _("Could not allocate cylinder-based partitions as primary partitions")) ret = fitSized(diskset, requests, 1, newParts) if ret == PARTITION_FAIL: return (ret, _("Could not allocate partitions as primary partitions")) ret = fitConstrained(diskset, requests, 0, newParts) if ret == PARTITION_FAIL: return (ret, _("Could not allocate cylinder-based partitions")) ret = fitSized(diskset, requests, 0, newParts) if ret == PARTITION_FAIL: return (ret, _("Could not allocate partitions")) for request in requests.requests: # set the unique identifier for raid and lvm devices if request.type == REQUEST_RAID and not request.device: request.device = str(request.uniqueID) if request.type == REQUEST_VG and not request.device: request.device = str(request.uniqueID) # anything better we can use for the logical volume? if request.type == REQUEST_LV and not request.device: request.device = str(request.uniqueID) if not request.device: # return PARTITION_FAIL raise PartitioningError, "Unsatisfied partition request\n%s" %(request) # get the sizes for raid devices, vgs, and logical volumes for request in requests.requests: if request.type == REQUEST_RAID: request.size = request.getActualSize(requests, diskset) if request.type == REQUEST_VG: request.size = request.getActualSize(requests, diskset) if request.type == REQUEST_LV: if request.grow: request.setSize(request.getStartSize()) else: request.size = request.getActualSize(requests, diskset) vgreq = requests.getRequestByID(request.volumeGroup) return (PARTITION_SUCCESS, "success") ## print "disk layout after everything is done" ## print diskset.diskState() def doPartitioning(diskset, requests, doRefresh = 1): for request in requests.requests: request.requestSize = request.size request.currentDrive = None if doRefresh: diskset.refreshDevices() # XXX - handle delete requests for delete in requests.deletes: if isinstance(delete, partRequests.DeleteSpec): deletePart(diskset, delete) # FIXME: do we need to do anything with other types of deletes?? newParts = partlist() (ret, msg) = processPartitioning(diskset, requests, newParts) if ret == PARTITION_FAIL: raise PartitioningError, "Partitioning failed: %s" %(msg) ret = growParts(diskset, requests, newParts) newParts.reset() if ret != PARTITION_SUCCESS: raise PartitioningError, "Growing partitions failed" ret = bootRequestCheck(requests, diskset) if ret == BOOTALPHA_NOT_BSD: raise PartitioningWarning, _("Boot partition %s doesn't belong to a BSD disk label. SRM won't be able to boot from this partition. Use a partition belonging to a BSD disk label or change this device disk label to BSD.") %(requests.getBootableRequest()[0].mountpoint,) elif ret == BOOTALPHA_NO_RESERVED_SPACE: raise PartitioningWarning, _("Boot partition %s doesn't belong to a disk with enough free space at its beginning for the bootloader to live on. Make sure that there's at least 5MB of free space at the beginning of the disk that contains /boot") %(requests.getBootableRequest()[0].mountpoint,) elif ret == BOOTEFI_NOT_VFAT: raise PartitioningError, _("Boot partition %s isn't a VFAT partition. EFI won't be able to boot from this partition.") %(requests.getBootableRequest()[0].mountpoint,) elif ret == BOOTIPSERIES_TOO_HIGH: raise PartitioningError, _("Boot partition isn't located early enough on the disk. OpenFirmware won't be able to boot this installation.") elif ret == BOOT_ABOVE_1024: # we can't make boot disks anymore and this isn't much of a problem # for "modern" hardware. (#122535) pass elif ret != PARTITION_SUCCESS: # more specific message? raise PartitioningWarning, _("Boot partition %s may not meet booting constraints for your architecture.") %(requests.getBootableRequest()[0].mountpoint,) # raise PartitioningWarning, _("Boot partition %s may not meet booting constraints for your architecture. Creation of a boot disk is highly encouraged.") %(requests.getBootableRequest()[0].mountpoint,) # now grow the logical partitions growLogicalVolumes(diskset, requests) # make sure our logical volumes still fit # # XXXX should make all this used lvm.getVGFreeSpace() and # lvm.getVGUsedSpace() at some point # vgused = {} for request in requests.requests: if request.type == REQUEST_LV: size = int(request.getActualSize(requests, diskset)) if vgused.has_key(request.volumeGroup): vgused[request.volumeGroup] = (vgused[request.volumeGroup] + size) else: vgused[request.volumeGroup] = size for vg in vgused.keys(): request = requests.getRequestByID(vg) log("Used size vs. available for vg %s: %s %s", request.volumeGroupName, vgused[vg], request.getActualSize(requests, diskset)) if vgused[vg] > request.getActualSize(requests, diskset): raise PartitioningError, _("Adding this partition would not " "leave enough disk space for already " "allocated logical volumes in " "%s." % (request.volumeGroupName)) if ret == PARTITION_SUCCESS: return # given clearpart specification execute it # probably want to reset diskset and partition request lists before calling # this the first time def doClearPartAction(partitions, diskset): type = partitions.autoClearPartType cleardrives = partitions.autoClearPartDrives if type == CLEARPART_TYPE_LINUX: linuxOnly = 1 elif type == CLEARPART_TYPE_ALL: linuxOnly = 0 elif type == CLEARPART_TYPE_NONE: return else: raise ValueError, "Invalid clear part type in doClearPartAction" drives = diskset.disks.keys() drives.sort() for drive in drives: # skip drives not in clear drive list if cleardrives and len(cleardrives) > 0 and not drive in cleardrives: continue disk = diskset.disks[drive] part = disk.next_partition() while part: if (not part.is_active() or (part.type == parted.PARTITION_EXTENDED) or (part.disk.type.name == "mac" and part.num == 1 and part.get_name() == "Apple")): part = disk.next_partition(part) continue if part.fs_type: ptype = partedUtils.get_partition_file_system_type(part) else: ptype = None # we want to do the clearing if # 1) clearAll is set # 2) there's a fsystem on the partition and it's a "native" fs # 3) there's not fsystem but the numeric id of partition is native # 4) the ptable doesn't support numeric ids, but it appears to be # a RAID or LVM device (#107319) if ((linuxOnly == 0) or (ptype and ptype.isLinuxNativeFS()) or (not ptype and partedUtils.isLinuxNativeByNumtype(part.native_type)) or ((part.native_type == -1) and # the ptable doesn't have types ((part.is_flag_available(parted.PARTITION_RAID) and part.get_flag(parted.PARTITION_RAID)) or # this is a RAID (part.is_flag_available(parted.PARTITION_LVM) and part.get_flag(parted.PARTITION_LVM))))): # or an LVM old = partitions.getRequestByDeviceName(partedUtils.get_partition_name(part)) if old.getProtected(): part = disk.next_partition(part) continue partitions.deleteDependentRequests(old) partitions.removeRequest(old) drive = partedUtils.get_partition_drive(part) delete = partRequests.DeleteSpec(drive, part.geom.start, part.geom.end) partitions.addDelete(delete) # ia64 autopartitioning is strange as /boot/efi is vfat -- # if linuxonly and have an msdos partition and it has the # bootable flag set, do not delete it and make it our # /boot/efi as it could contain system utils. # doesn't apply on kickstart installs or if no boot flag if ((iutil.getArch() == "ia64") and (linuxOnly == 1) and (not partitions.isKickstart) and part.is_flag_available(parted.PARTITION_BOOT)): if part.fs_type and (part.fs_type.name == "FAT" or part.fs_type.name == "fat16" or part.fs_type.name == "fat32"): if part.get_flag(parted.PARTITION_BOOT): req = partitions.getRequestByDeviceName(partedUtils.get_partition_name(part)) req.mountpoint = "/boot/efi" req.format = 0 request = None for req in partitions.autoPartitionRequests: if req.mountpoint == "/boot/efi": request = req break if request: partitions.autoPartitionRequests.remove(request) # hey, what do you know, pseries is weird too. *grumble* elif (((iutil.getPPCMachine() == "pSeries") or (iutil.getPPCMachine() == "iSeries")) and (linuxOnly == 1) and (not partitions.isKickstart) and part.is_flag_available(parted.PARTITION_BOOT) and (part.native_type == 0x41) and part.get_flag(parted.PARTITION_BOOT)): req = partitions.getRequestByDeviceName(partedUtils.get_partition_name(part)) req.mountpoint = None req.format = 0 request = None for req in partitions.autoPartitionRequests: if req.fstype == fsset.fileSystemTypeGet("PPC PReP Boot"): request = req break if request: partitions.autoPartitionRequests.remove(request) part = disk.next_partition(part) # set the diskset up doPartitioning(diskset, partitions, doRefresh = 1) for drive in drives: if cleardrives and len(cleardrives) > 0 and not drive in cleardrives: continue disk = diskset.disks[drive] ext = disk.extended_partition # if the extended is empty, blow it away if ext and len(partedUtils.get_logical_partitions(disk)) == 0: delete = partRequests.DeleteSpec(drive, ext.geom.start, ext.geom.end) old = partitions.getRequestByDeviceName(partedUtils.get_partition_name(ext)) partitions.removeRequest(old) partitions.addDelete(delete) deletePart(diskset, delete) continue def doAutoPartition(dir, diskset, partitions, intf, instClass, dispatch): if instClass.name and instClass.name == "kickstart": isKickstart = 1 # XXX hack partitions.setProtected(dispatch) else: isKickstart = 0 if dir == DISPATCH_BACK: diskset.refreshDevices() partitions.setFromDisk(diskset) partitions.setProtected(dispatch) partitions.autoPartitionRequests = [] return # if no auto partition info in instclass we bail if len(partitions.autoPartitionRequests) < 1: #return DISPATCH_NOOP # XXX if we noop, then we fail later steps... let's just make it # the workstation default. should instead just never get here # if no autopart info instClass.setDefaultPartitioning(partitions, doClear = 0) # reset drive and request info to original state # XXX only do this if we're dirty ## id.diskset.refreshDevices() ## id.partrequests = PartitionRequests(id.diskset) doClearPartAction(partitions, diskset) # XXX clearpartdrives is overloaded as drives we want to use for linux drives = partitions.autoClearPartDrives for request in partitions.autoPartitionRequests: if (isinstance(request, partRequests.PartitionSpec) and request.device): # get the preexisting partition they want to use req = partitions.getRequestByDeviceName(request.device) if not req or not req.type or req.type != REQUEST_PREEXIST: intf.messageWindow(_("Requested Partition Does Not Exist"), _("Unable to locate partition %s to use " "for %s.\n\n" "Press 'OK' to reboot your system.") % (request.device, request.mountpoint), custom_icon='error') sys.exit(0) # now go through and set things from the request to the # preexisting partition's request... ladeda if request.mountpoint: req.mountpoint = request.mountpoint if request.badblocks: req.badblocks = request.badblocks if request.uniqueID: # for raid to work req.uniqueID = request.uniqueID if not request.format: req.format = 0 else: req.format = 1 req.fstype = request.fstype # XXX whee! lots of cut and paste code lies below elif (isinstance(request, partRequests.RaidRequestSpec) and request.preexist == 1): req = partitions.getRequestByDeviceName(request.device) if not req or req.preexist == 0: intf.messageWindow(_("Requested Raid Device Does Not Exist"), _("Unable to locate raid device %s to use " "for %s.\n\n" "Press 'OK' to reboot your system.") % (request.device, request.mountpoint), custom_icon='error') sys.exit(0) # now go through and set things from the request to the # preexisting partition's request... ladeda if request.mountpoint: req.mountpoint = request.mountpoint if request.badblocks: req.badblocks = request.badblocks if request.uniqueID: # for raid to work req.uniqueID = request.uniqueID if not request.format: req.format = 0 else: req.format = 1 req.fstype = request.fstype # XXX not copying the raid bits because they should be handled # automagically (actually, people probably aren't specifying them) elif (isinstance(request, partRequests.VolumeGroupRequestSpec) and request.preexist == 1): # get the preexisting partition they want to use req = partitions.getRequestByVolumeGroupName(request.volumeGroupName) if not req or req.preexist == 0 or req.format == 1: intf.messageWindow(_("Requested Volume Group Does Not Exist"), _("Unable to locate volume group %s to use " "for %s.\n\n" "Press 'OK' to reboot your system.") % (request.volumeGroupName, request.mountpoint), custom_icon='error') sys.exit(0) oldid = None # now go through and set things from the request to the # preexisting partition's request... ladeda if request.physicalVolumes: req.physicalVolumes = request.physicalVolumes if request.pesize: req.pesize = request.pesize if request.uniqueID: # for raid to work oldid = req.uniqueID req.uniqueID = request.uniqueID if not request.format: req.format = 0 else: req.format = 1 # we also need to go through and remap everything which we # previously found to our new id. yay! if oldid is not None: for lv in partitions.getLVMLVForVGID(oldid): lv.volumeGroup = req.uniqueID elif (isinstance(request, partRequests.LogicalVolumeRequestSpec) and request.preexist == 1): # get the preexisting partition they want to use req = partitions.getRequestByLogicalVolumeName(request.logicalVolumeName) if not req or req.preexist == 0: intf.messageWindow(_("Requested Logical Volume Does Not Exist"), _("Unable to locate logical volume %s to use " "for %s.\n\n" "Press 'OK' to reboot your system.") % (request.logicalVolumeName, request.mountpoint), custom_icon='error') sys.exit(0) # now go through and set things from the request to the # preexisting partition's request... ladeda if request.volumeGroup: req.volumeGroup = request.volumeGroup if request.mountpoint: req.mountpoint = request.mountpoint if request.uniqueID: # for raid to work req.uniqueID = request.uniqueID if not request.format: req.format = 0 else: req.format = 1 req.fstype = request.fstype else: req = copy.copy(request) if req.type == REQUEST_NEW and not req.drive: req.drive = drives # if this is a multidrive request, we need to create one per drive if req.type == REQUEST_NEW and req.multidrive: if req.drive is None: req.drive = diskset.disks.keys() for drive in req.drive: r = copy.copy(req) r.drive = [ drive ] partitions.addRequest(r) continue if (isinstance(req, partRequests.VolumeGroupRequestSpec)): # if the number of physical volumes requested is zero, then # add _all_ physical volumes we can find if ((len(req.physicalVolumes) == 0) or (req.physicalVolumes is None)): req.physicalVolumes = [] for r in partitions.requests: if isinstance(r.fstype, fsset.lvmPhysicalVolumeDummyFileSystem): valid = 0 if ((partitions.autoClearPartDrives is None) or len(partitions.autoClearPartDrives) == 0): valid = 1 else: for d in r.drive: if d in partitions.autoClearPartDrives: valid = 1 break if not r.multidrive: valid = 0 if valid: req.physicalVolumes.append(r.uniqueID) # FIXME: this is a hack so that autopartition'd vgs # can have a unique name if req.autoname == 1 and req.volumeGroupName == "lvm": n = lvm.createSuggestedVGName(partitions) req.volumeGroupName = n if (isinstance(req, partRequests.LogicalVolumeRequestSpec)): # if the volgroup is set to a string, we probably need # to find that volgroup and use it's id if type(req.volumeGroup) == type(""): r = None if req.volumeGroup == "lvm": for p in partitions.requests: if isinstance(p, partRequests.VolumeGroupRequestSpec) and p.autoname == 1: r = p break else: r = partitions.getRequestByVolumeGroupName(req.volumeGroup) if r is not None: req.volumeGroup = r.uniqueID else: raise RuntimeError, "Unable to find the volume group for logical volume %s" %(req.logicalVolumeName,) partitions.addRequest(req) # sanity checks for the auto partitioning requests; mostly only useful # for kickstart as our installclass defaults SHOULD be sane for req in partitions.requests: errors = req.sanityCheckRequest(partitions) if errors: intf.messageWindow(_("Automatic Partitioning Errors"), _("The following errors occurred with your " "partitioning:\n\n%s\n\n" "Press 'OK' to reboot your system.") % (errors,), custom_icon='error') sys.exit(0) try: doPartitioning(diskset, partitions, doRefresh = 0) except PartitioningWarning, msg: if not isKickstart: intf.messageWindow(_("Warnings During Automatic Partitioning"), _("Following warnings occurred during automatic " "partitioning:\n\n%s") % (msg.value,), custom_icon='warning') else: log("WARNING: %s" % (msg.value)) except PartitioningError, msg: # restore drives to original state diskset.refreshDevices() partitions.setFromDisk(diskset) if not isKickstart: extra = "" dispatch.skipStep("partition", skip = 0) else: extra = _("\n\nPress 'OK' to reboot your system.") intf.messageWindow(_("Error Partitioning"), _("Could not allocate requested partitions: \n\n" "%s.%s") % (msg.value, extra), custom_icon='error') if isKickstart: sys.exit(0) # now do a full check of the requests (errors, warnings) = partitions.sanityCheckAllRequests(diskset) if warnings: for warning in warnings: log("WARNING: %s" % (warning)) if errors: errortxt = string.join(errors, '\n') if isKickstart: extra = _("\n\nPress 'OK' to reboot your system.") else: extra = _("\n\nYou can choose a different automatic partitioning " "option, or click 'Back' to select manual partitioning." "\n\nPress 'OK' to continue.") intf.messageWindow(_("Automatic Partitioning Errors"), _("The following errors occurred with your " "partitioning:\n\n%s\n\n" "This can happen if there is not enough " "space on your hard drive(s) for the " "installation.%s") % (errortxt, extra), custom_icon='error') # # XXX if in kickstart we reboot # if isKickstart: intf.messageWindow(_("Unrecoverable Error"), _("Your system will now be rebooted.")) sys.exit(0) return DISPATCH_BACK def autoCreatePartitionRequests(autoreq): """Return a list of requests created with a shorthand notation. Mainly used by installclasses; make a list of tuples of the form (mntpt, fstype, minsize, maxsize, grow, format) mntpt = None for non-mountable, otherwise is mount point fstype = None to use default, otherwise a string minsize = smallest size maxsize = max size, or None means no max grow = 0 or 1, should partition be grown format = 0 or 1, whether to format """ requests = [] for (mntpt, fstype, minsize, maxsize, grow, format) in autoreq: if fstype: ptype = fsset.fileSystemTypeGet(fstype) else: ptype = fsset.fileSystemTypeGetDefault() newrequest = partRequests.PartitionSpec(ptype, mountpoint = mntpt, size = minsize, maxSizeMB = maxsize, grow = grow, format = format) requests.append(newrequest) return requests def autoCreateLVMPartitionRequests(autoreq): """Return a list of requests created with a shorthand notation using LVM. Mainly used by installclasses; make a list of tuples of the form (mntpt, fstype, minsize, maxsize, grow, format) mntpt = None for non-mountable, otherwise is mount point fstype = None to use default, otherwise a string minsize = smallest size maxsize = max size, or None means no max grow = 0 or 1, should partition be grown format = 0 or 1, whether to format asvol = 0 or 1, whether or not it should be a logical volume """ requests = [] nr = partRequests.PartitionSpec(fsset.fileSystemTypeGet("physical volume (LVM)"), mountpoint = None, size = 0, maxSizeMB = None, grow = 1, format = 1, multidrive = 1) requests.append(nr) nr = partRequests.VolumeGroupRequestSpec(fstype = None, vgname = "lvm", physvols = [], format = 1) nr.autoname = 1 requests.append(nr) volnum = 0 for (mntpt, fstype, minsize, maxsize, grow, format, asvol) in autoreq: if fstype: ptype = fsset.fileSystemTypeGet(fstype) else: ptype = fsset.fileSystemTypeGetDefault() if not asvol: newrequest = partRequests.PartitionSpec(ptype, mountpoint = mntpt, size = minsize, maxSizeMB = maxsize, grow = grow, format = format) else: newrequest = partRequests.LogicalVolumeRequestSpec(ptype, mountpoint = mntpt, size = minsize, maxSizeMB = maxsize, grow = grow, format = format, lvname = "LogVol%02d" %(volnum,), volgroup = "lvm") volnum += 1 requests.append(newrequest) return requests def getAutopartitionBoot(): """Return the proper shorthand for the boot dir (arch dependent).""" if iutil.getArch() == "ia64": return [ ("/boot/efi", "vfat", 100, None, 0, 1, 0) ] elif (iutil.getPPCMachine() == "pSeries"): return [ (None, "PPC PReP Boot", 4, None, 0, 1, 0), ("/boot", None, 100, None, 0, 1, 0) ] elif (iutil.getPPCMachine() == "iSeries") and not iutil.hasiSeriesNativeStorage(): return [ (None, "PPC PReP Boot", 16, None, 0, 1, 0) ] elif (iutil.getPPCMachine() == "iSeries") and iutil.hasiSeriesNativeStorage(): return [] elif (iutil.getPPCMachine() == "PMac") and iutil.getPPCMacGen() == "NewWorld": return [ ( None, "Apple Bootstrap", 1, 1, 0, 1, 0), ("/boot", None, 100, None, 0, 1, 0) ] else: return [ ("/boot", None, 100, None, 0, 1, 0) ] def queryAutoPartitionOK(intf, diskset, partitions): type = partitions.autoClearPartType drives = partitions.autoClearPartDrives if type == CLEARPART_TYPE_LINUX: msg = CLEARPART_TYPE_LINUX_WARNING_MSG elif type == CLEARPART_TYPE_ALL: msg = CLEARPART_TYPE_ALL_WARNING_MSG elif type == CLEARPART_TYPE_NONE: return 1 else: raise ValueError, "Invalid clear part type in queryAutoPartitionOK" drvstr = "\n\n" if drives == None: drives = diskset.disks.keys() drives.sort() width = 44 str = "" maxlen = 0 for drive in drives: if (len(drive) > maxlen): maxlen = len(drive) maxlen = maxlen + 8 # 5 for /dev/, 3 for spaces for drive in drives: if (len(str) + maxlen <= width): str = str + "%-*s" % (maxlen, "/dev/"+drive) else: drvstr = drvstr + str + "\n" str = "" str = "%-*s" % (maxlen, "/dev/"+drive) drvstr = drvstr + str + "\n" rc = intf.messageWindow(_("Warning"), _(msg) % drvstr, type="yesno", default="no", custom_icon ="warning") return rc # XXX hack but these are common strings to TUI and GUI PARTMETHOD_TYPE_DESCR_TEXT = N_("Automatic Partitioning sets partitions " "based on the selected installation type. " "You also " "can customize the partitions once they " "have been created.\n\n" "The manual disk partitioning tool, Disk Druid, " "allows you " "to create partitions in an interactive " "environment. You can set the file system " "types, mount points, partition sizes, and more.") AUTOPART_DISK_CHOICE_DESCR_TEXT = N_("Before automatic partitioning can be " "set up by the installation program, you " "must choose how to use the space on " "your hard drives.") CLEARPART_TYPE_ALL_DESCR_TEXT = N_("Remove all partitions on this system") CLEARPART_TYPE_LINUX_DESCR_TEXT = N_("Remove all Linux partitions on this system") CLEARPART_TYPE_NONE_DESCR_TEXT = N_("Keep all partitions and use existing free space") CLEARPART_TYPE_ALL_WARNING_MSG = N_("You have chosen to remove " "all partitions (ALL DATA) on the " "following drives:%s\nAre you sure you " "want to do this?") CLEARPART_TYPE_LINUX_WARNING_MSG = N_("You have chosen to " "remove all Linux partitions " "(and ALL DATA on them) on the " "following drives:%s\n" "Are you sure you want to do this?")