2005-07-12 Jeremy Katz * loader2/loader.c: Fix silly syntax error (pnasrat) * scripts/upd-instroot (KEEPFILE): Add audit stuff (#162821) 2005-07-08 Jeremy Katz * dispatch.py (installSteps): Pass id down to network. * iw/network_gui.py (getNext, getScreen): If we're using an interactive kickstart install and using DHCP for networking, don't obliterate the nameserver settings so we write out a good /etc/resolv.conf (clumens, #151472). * textw/network_text.py: Accept id parameter. * rescue.py (runRescue): Pass id parameter. * partitions.py (Partitions.getBootableRequest): Support bootable SW RAID on ppc (#159902) * raid.py (raidBootArches): Make ppc allow bootable RAID * fsset.py (prepbootFileSystem.__init__): Set PReP as bootable * loader2/loader.c: Support for setting mtu on the command line (#155414) 2005-07-06 Jeremy Katz * packages.py (handleMiscPackages): Select kernel-devel if we install kernel and gcc even if we installed kernel-smp also (#160533, #162581) 2005-05-16 Chris Lumens * isys/eddsupport.c (readDiskSig): Close file descriptor leak relating to reading the partition table (Jon Burgess, #160720). 2005-05-10 pnasrat * anaconda.spec: Bump version * kickstart.py: fix logic error 2005-04-27 Jeremy Katz * cmdline.py (progressDisplay.setPackageStatus): Don't spam about package downloads in cmdline mode (#155250) 2005-04-22 Paul Nasrat * bootloader.py: Ensure kernel written to PReP #146915 2005-04-12 pnasrat * anaconda.spec: Bump version 2005-04-11 Jeremy Katz * loader2/net.c: Don't free needed string (clumens, #149871, #150844, #153072) 2005-04-11 Paul Nasrat * kickstart.py: Correct name.arch (#133396, #154407) 2005-03-31 Chris Lumens * iw/network_gui.py (NetworkWindow.setHostOptionsSensitivity): Make sure automatic hostname option isn't greyed out when using a static IP for installation (#149116). 2005-03-23 Jeremy Katz * anaconda.spec: Bump version. * loader2/selinux.c: Load SELinux booleans file if it exists (#151896) 2005-03-14 Jeremy Katz * anaconda.spec: Bump version. 2005-03-10 Chris Lumens * anaconda (startVNCServer): Fix typo in Xvnc parameters (#150498). 2005-03-02 Jeremy Katz * anaconda.spec: Bump version. * kickstart.py (KickstartBase.doBootloader): Don't install a bootloader if --location=none is provided in the kickstart config file (clumens, #146448). * autopart.py (fitConstrained): Allow logical partitions to go all the way to the end of the extended partition. (clumens, #101432) 2005-02-28 Jeremy Katz * anaconda (startVNCServer): Add -once to help ensure Xnvc exits when last client of the server exits (#137337) 2005-02-24 Jeremy Katz * anaconda.spec: Bump version. 2005-02-24 Paul Nasrat * loader2/net.c: ethtool everywhere (#145422) 2005-02-21 Chris Lumens * iw/network_gui.py (NetworkWindow.setHostOptionsSensitivity): Properly set hostname option sensitivity to follow which option is selected (#149116). 2005-02-21 Jeremy Katz * fsset.py (FileSystemSet.mtab): Don't write out filesystems we haven't mounted like /dev/shm (#149091) 2005-02-10 Chris Lumens * iw/network_gui.py (NetworkWindow.getScreen): Always put the hostname we got from DHCP (or localhost.localdomain) in the hostname entry box (#132826). 2005-02-08 Paul Nasrat * upgradeclass.py: Setup iSeries bootloader as no real config on upgrades (#146915) * findpackageset.py: Don't use rpm.archscore as iseries upgrades don't work (#146915) 2005-01-25 Chris Lumens * autopart.py (growLogicalVolumes): Properly grow logical partitions in cases where there's more than one volume group defined (#144280, #145145). 2005-01-19 Chris Lumens * iw/partition_gui.py (PartitionWindow.refresh): Only repopulate the partition display screen if we were successful in adding the request. (corner case - #137119). 2005-01-11 Jeremy Katz * packages.py (readPackages): Ensure that the Core group exists in the comps file (#143930) 2005-01-10 Jeremy Katz * dispatch.py (installSteps): Pass new arg to desktopchoice * iw/desktop_choice_gui.py (DesktopChoiceWindow.getNext): Reset package selection to defaults if selected (#142415) * textw/desktop_choice_text.py (DesktopChoiceWindow): Likewise. * installclass.py (BaseInstallClass.setSteps): Allow install classes to turn off showing upgrade as an option (only really applicable if you only have one install class) 2005-01-06 Jeremy Katz * loader2/loader.c (parseCmdLineIp): Add patch from Bastien Nocera to support parsing of pxelinux IPAPPEND (#134054) 2005-01-04 Jeremy Katz * partedUtils.py (getDefaultDiskType): the default disk type on s390 should be dasd, but we can't format those with parted and if we get here, we're formatting an fcp disk which should be msdos (#144199) * loader2/net.c: Fix multiple dns servers being specified on the command line. Again. Patch from Matthew Miller (#84409) * loader2/loader.c: Apparently, I can't count (#144006) 2004-12-30 Jeremy Katz * packages.py (rpmErrorClass.selected): Fix tyop (#143257) 2004-12-23 Jeremy Katz * anaconda.spec: Bump version. * isys/isys.py (readSwapLabel_int): Update for newer swap label format (#143447) * network.py (Network.available): Work around kudzu not being able to determine which netdev is which and set hwaddrs anyway (except on s390 to avoid setting it on qeth) (#143535) 2004-12-20 Jeremy Katz * iw/progress_gui.py (InstallProgressWindow_NEW.setPackage): Don't scale images to sizes that they're not (#143276) * packages.py (doPreInstall): Some finagling for kernel-*devel handling (#143257) 2004-12-16 Jeremy Katz * anaconda.spec: Bump version. 2004-12-16 Paul Nasrat * loader2/init.c: Extra checking to distinguish hvsi consoles #134397 2004-12-14 Jeremy Katz * anaconda.spec: Bump version. * command-stubs/mknod-stub (main): Add * partedUtils.py (get_partition_name): * iutil.py (makeDriveDeviceNodes): * fsset.py (prepbootFileSystem.getDiskPart): Promise SX8 devices are of the form /dev/sx8/dpn; support this as needed. * loader2/driverdisk.c (useKickstartDD): Add support for biosdev in driverdisk directive. Patch basically from Rez Kabir AT dell (#142738) 2004-12-14 Paul Nasrat * lvm.py: LVM on RAID1 - (#141781) 2004-12-09 Jeremy Katz * fsset.py (getDevFD): Better error handling if we can't create the device (#142273) 2004-12-08 Jeremy Katz * anaconda.spec: Bump version. * partitions.py (Partitions.setFromDisk): Adding as a request requires more bits, do as a delete (#142304) (Partitions.getPartialLVMRequests): Check deletes now * partRequests.py (PartialVolumeGroupRequestSpec): It's not really a RequestSpec, change accordingly. 2004-12-03 Jeremy Katz * anaconda.spec: Bump version. * loader2/mediacheck.c: Disable read-ahead for the last meg or so of the CD to try to avoid mediacheck problems (#131051 and others) * loader2/mediacheck.h (mediaCheckFile): Add new arg. * loader2/cdinstall.c (mediaCheckCdrom): Likewise. * loader2/method.c (queryISOMediaCheck): Likewise. * constants.py (BETANAG): turn off beta nag. * partitions.py (Partitions.setFromDisk): Detect partial vgs, preserve the name (#139058) * lvm.py (partialvgs): Detect partial volume groups. * partitions.py (Partitions.getPartialLVMRequests): Get partial volume group requests (Partitions.isVolumeGroupNameInUse): If we have a partial by the requested name, let it be known so that we avoid conflicts. * partRequests.py (PartialVolumeGroupRequestSpec.__init__): Add partial volume group request for handling non-complete volume groups so we avoid conflicting names. 2004-12-01 Jeremy Katz * loader2/shutdown.c (shutDown): Make loop while waiting for reboot less cpu-intensive to improve user-experience with, eg, VMWare * partitions.py (Partitions.writeKS): Include pesize (#141370) 2004-11-30 Jeremy Katz * image.py (findIsoImages): Skip ISOs which don't have a product/RPMS dir to avoid some of the confusion if users put the source ISOs in the same dir as the binary (#106017) * network.py (Network.write): Write WEPKEY in /etc/sysconfig/network-scripts/keys-$DEVNAME with mode 0600 (#140645) * iw/network_gui.py (NetworkWindow.editDevice): KEY, not WEPKEY (#140645) * iw/network_gui.py (NetworkWindow.editDevice): Get rid of warning from pygtk (merge from HEAD) 2004-11-30 Jeremy Katz * anaconda.spec: Bump version. * autopart.py (setPreexistParts): Fix handling of existing partitions on drives which don't have a partition table we understand (#131333) * loader2/modules.c (lateModuleSort): Fix the list to be big enough (#140541, #140876) 2004-11-29 Paul Nasrat * autopart.py: Fix LVM with add new in autopartitioning (#141268) 2004-11-29 Jeremy Katz * iw/zfcp_gui.py: Fix removal and editing of devices to stick (#140559) 2004-11-29 Karsten Hopp * loader2/net.c: CTCPROT fix (#133088) 2004-11-24 Jeremy Katz * upgrade.py: Remove linuxconf stuff from the upgrade remove blacklist. They didn't exist in RHEL 3 which is our only supported upgrade version and there are a few weird bugs which seem to be related to this. 2004-11-23 Jeremy Katz * upgrade.py (upgradeFindPackages): More iiiimf upgrade (#129218) 2004-11-22 Jeremy Katz * anaconda.spec: Bump version. * loader2/init.c: Only open /dev/console once. 2004-11-22 Paul Nasrat * loader2/init.c: Improved ppc console detection, based on notting's kudzu patch #135707 (#134397) 2004-11-22 Jeremy Katz * loader2/modules.c: Fix segfault on ia64 (#140093) 2004-11-19 Jeremy Katz * packages.py (doPreInstall): Don't remove the directories as they may not be empty (#133773) 2004-11-17 Jeremy Katz * textw/upgrade_bootloader_text.py (UpgradeBootloaderWindow.__call__): Set a default when we can't determine the boot loader to avoid indeterminate state (#139603) * lvm.py: Don't disable LVM if vgscan, et al segfault (#134263) 2004-11-16 Jeremy Katz * loader2/net.c (setKickstartNetwork): Allow passing --notksdevice to your network lines so that you don't try to use them as your device (#136903) * kickstart.py (KickstartBase.doNetwork): Handle --notksdevice here too. * loader2/net.c: Allow going back and manually changing the network device used even if ksdevice= is passed (#136903) * loader2/loader.c: Fix for serial console magic to work again with just console= and not explicit serial (#137971) 2004-11-15 Jeremy Katz * anaconda.spec: Bump version. * loader2/modules.c: Backport segfault fix from -HEAD * isys/isys.py (hardDriveDict): ignore IBM *STMF disks as they're just the *STMF for booting on a power5 iSeries box (#137920) 2004-11-12 Jeremy Katz * bootloader.py: Add patch from HJ Lu to fix popping hang in cases where boot loader isn't being installed (#138932) * packages.py (copyAnacondaLogs): Copy in the X log too per pnasrat's request. 2004-11-11 Jeremy Katz * iw/partition_ui_helpers_gui.py (mountptchangeCB): Automatically set the filesystem type to vfat if the user selects /boot/efi as the mountpoint on ia64 (#138580) * iw/datacombo.py (DataComboBox.set_active_text): Add convenience method to set the active item based on text. 2004-11-10 Jeremy Katz * loader2/loader.c: Make serial imply nofb (#134167) 2004-11-10 Paul Nasrat * findpackageset.py: Fix for obsoletes E being long. Gratuitously borrowed from rpmUtils 2004-11-10 Jeremy Katz * packages.py (doPreInstall): If we go back, we need to try unmount /dev, too (#133773) 2004-11-08 Jeremy Katz * text.py (InstallInterface.run): Fallback to English for languages that can't do text-mode (#138308) 2004-11-08 Karsten Hopp * loader2/linuxrc.s390: Don't ask for input if PORTNAME or CTCPROT are already set. Use defaults if RUNKS is set for kickstart installations. 2004-11-05 Jeremy Katz * Makefile (build): autobuild for RHEL-4 * isys/isys.py (readJFSLabel_int): Fix exception handling. (readXFSLabel_int): Likewise. (readSwapLabel_int): Likewise. 2004-11-04 Jeremy Katz * anaconda.spec: Bump version. * partitions.py (Partitions.writeKS): Have to have sizes as integers (#138109) * loader2/modules.c (lateModuleSort): Implement an additional sort to move drivers to the end of our list of drivers to load. This is handy for, eg, fibre channel so that it doesn't end up at the front of the list so that people don't get confused with sda being their FC disk. Also, put ibmvscsic in the list due to #137920 * loader2/module-info: More qlogic fibre channel adapters * upgrade.py (upgradeFindPackages): Key iiimf-le-canna off of kinput2-canna-wnn6 instead of just kinput2 (#129218) 2004-11-03 Jeremy Katz * iw/network_gui.py (NetworkWindow.setupDevices): * textw/network_text.py (NetworkDeviceWindow.runScreen): Sync behavior of onboot between gui/text (#138011) * autopart.py (getAutopartitionBoot): Use iutil.hasiSeriesNativeStorage instead of iutil.hasIbmSis() * partitions.py (Partitions.sanityCheckAllRequests): Likewise. * iutil.py (hasiSeriesNativeStorage): Rename from hasIbmSis(), check for ipr as well as ibmsis. * packages.py (copyAnacondaLogs): Set permissions on logs (#137963) * scripts/scrubtree: Don't use busybox shutdown, poweroff, or reboot (#137948) 2004-11-03 Karsten Hopp * loader2/linuxrc.s390: Check input for CTCPROT, remove ctc-tty from selection 2004-11-02 Jeremy Katz * rescue.py (runRescue): Fix traceback with going back in the network config (#137844) 2004-11-02 Karsten Hopp * loader2/linuxrc.s390: Ask for CTCPROT even if MTU is already specified (mainframe) 2004-11-02 Karsten Hopp * loader2/linuxrc.s390: Try harder to find out the LCS interface name 2004-11-02 Jeremy Katz * packages.py (handleX11Packages): Handle making sure gdm is installed and don't get TWM started if people don't install GNOME (#132743) * isys/isys.py (readJFSLabel_int): Better handling of errors while trying to read the label (#137846). (readXFSLabel_int): Likewise. (readSwapLabel_int): Likewise. 2004-11-02 Tim Waugh * loader2/hdinstall.c (mountHardDrive): Pass the correct pointer to free() (bug #137533). 2004-10-29 Kristian Høgsberg * mini-wm.c (main): Write acknowledge token back to anaconda to indicate successful connection to the X server. * anaconda (startMiniWM): Wait for token before launching other X clients (#108777). 2004-10-29 Jeremy Katz * loader2/net.c (getWirelessConfig): Allow 128-bit WEP keys (#137447) 2004-10-27 Jeremy Katz * upgrade.py (upgradeFindPackages): Fix traceback on cjk upgrades (#137345) 2004-10-26 Jeremy Katz * anaconda.spec: Bump version. * partedUtils.py (DiskSet.openDevices): Don't die if we don't have an intf set up yet (#130123, #137239) * upgrade.py (upgradeFindPackages): firefox replaces mozilla/netscape (#137244) 2004-10-26 Jeremy Katz * anaconda.spec: Bump version. * kickstart.py (KickstartBase.definePartition): More fixing for size of zero (#137120) * scripts/mk-images: Use busybox sleep for s390 instead of coreutils sleep to avoid needing librt and libpthread (#131167) 2004-10-25 Jeremy Katz * loader2/net.c (setKickstartNetwork): Handle onboot properly (#136903) * lang-table: Punjabi shouldn't try to do text mode (#137030) 2004-10-24 Jeremy Katz * scripts/mk-images.ia64 (IDEMODULES): Add sgiioc4 module for Altix cdrom drive (#136730) 2004-10-21 Bill Nottingham * scripts/mk-images: forward port pci.ids trimming from taroon-branch * utils/trimpciids: new file 2004-10-20 Jeremy Katz * anaconda.spec: Bump version. * scripts/mk-images.ppc: Update to work with new mkzimage so we get a netboot.img again (#125129) 2004-10-20 Jeremy Katz * anaconda.spec: Bump version. 2004-10-19 Karsten Hopp * loader2/linuxrc.s390: make sure to lowercase SUBCHANNELS sourced from the .parm/.conf file, too 2004-10-19 Jeremy Katz * anaconda.spec: Bump version. * loader2/linuxrc.s390: Ensure OSA addresses are lowercase so the kernel will like them (#133190) * autopart.py (doAutoPartition): Don't hard code VG name for auto-partitioned volume groups as VolGroup00 (#134263) * partRequests.py (VolumeGroupRequestSpec.__init__): Add autoname hack for autopart + lvm. * packages.py (handleX11Packages): Make sure that we don't do a graphical startup if people run out of space and then go back to unselect stuff (#135895) * scripts/upd-instroot: Change filenames for Indic fonts 2004-10-18 Jeremy Katz * anaconda.spec: Bump version. Rebuild against newer bogl to hopefully fix CJK text installs * scripts/upd-instroot: Add Bluecurve icon theme index, hopefully fixes the icon theme to be correct. * bootloader.py: Add a trailing newline to /etc/sysconfig/kernel * loader2/urlinstall.c: When using the local stage2.img shortcut, ensure that an hdlist exists in the tree they point at to catch typos sooner (#135603, #117155, #120101) * kickstart.py: Fix traceback using %post logging (Gijs Hollestelle, #136154) 2004-10-17 Jeremy Katz * anaconda.spec: Bump version. * iw/partition_gui.py: Fix font size to fit a little bit better (#135731) * partitions.py (Partitions.writeKS): Write out size=0 (#135714) * kickstart.py (KickstartBase.definePartition): Allow partition size to be zero to work better with LVM autopart (#135714) 2004-10-15 Jeremy Katz * iw/driveorderwidget.py: Remove empty row leading to traceback (#135944) * urlinstall.py: Replace "%" in urls with "%%" to avoid format string problems (#135929) * rescue.py (runRescue): bind mount /dev (#135860) * lang-table: Set Dutch and Danish keyboards by default (#135839) 2004-10-14 Jeremy Katz * loader2/module-info: Add s2io 10GbE driver * anaconda.spec: Bump version. 2004-10-14 Karsten Hopp * loader/linuxrc.s390: Hardcode LCS interface to eth0 (workaround until fix with sysfs interface is available) 2004-10-14 Jeremy Katz * scripts/upd-instroot: Add fonts for ta, gu, hi, bn and pa (#119283) * isys/lang.c (bterm_main): Enable bterm again for testing (#113910) * loader2/hdinstall.c: Fix segfault when using biospart for hard drive kickstart install. Patch from Rez Kabir (#135609) 2004-10-13 Jeremy Katz * bootloader.py: Write out /etc/sysconfig/kernel with the default kernel type and to change the bootloader default on new kernel installation (#135161) 2004-10-13 Karsten Hopp * scripts/mk-images: add /etc/pam.d/remote for telnet logins (mainframe) 2004-10-12 Jeremy Katz * anaconda.spec: Bump version * autopart.py (doAutoPartition): Be more certain we have one of "our" LVM partitions (#135440) * scripts/mk-images.x86_64: * scripts/mk-images.i386: Remove localboot option from syslinux.cfg for diskboot.img (#135263) * upgrade.py (upgradeFindPackages): Handle the great input method switch (#129218) * network.py (Network.__init__): Don't save the hwaddr for qeth (#135023) * packages.py (doPostInstall): Add rhgb in post-install, not doInstall (from msw on anaconda-devel-list) 2004-10-12 Bill Nottingham * loader2/module-info: add ahci, sx8 2004-10-11 Bill Nottingham * scripts/genlocalelist.py: reverse norwegian blacklisting (#129453) * loader2/module-info: add sata_nv, sata_sx4, ixgb; sort sata list 2004-10-07 Jeremy Katz * anaconda.spec: Bump version. * fsset.py (FileSystemSet.makeLVMNodes): Make sure the DM node doesn't exist before we create it (#124092) * textw/packages_text.py: Sort packages in the group details screen (#123437) * scripts/upd-instroot (KEEPFILEGR): Add prelink config (#117867) 2004-10-06 Jeremy Katz * iw/lvm_dialog_gui.py (VolumeGroupEditor.updateLogVolStore): Don't show "0" as a mountpoint for an LV that's not being mounted anywhere (#134867) * partRequests.py (RequestSpec.sanityCheckRequest): Call sanityCheckMountPoint with new option * partIntfHelpers.py (sanityCheckMountPoint): Don't allow formatting unless they specify a mountpoint on pre-existing partitions (#134865) * iw/network_gui.py (NetworkWindow.getScreen): Make Bengali fit a little bit better (#134762) 2004-10-06 Karsten Hopp * partedUtils.py: Fix traceback with unpartitioned FCP disks (mainframe) 2004-10-05 Jeremy Katz * anaconda.spec: Bump version: * kickstart.py (KickstartBase.readKickstart): Have to reset things when we enter a new scriptlet to break multiple scriptlet with different interpreters (#134707) * isys/devnodes.c: Working scsi disk nodes again (#134709) 2004-10-04 Jeremy Katz * anaconda.spec: Bump version * scripts/upd-instroot (PACKAGES): Add selinux-policy-targeted so that text-mode installs will have working SELinux (#134549) * kickstart.py (KickstartBase.readKickstart): Handle having a %include inside a scriptlet. (#120252) * iw/zfcp_gui.py: Fix zfcp help tag (ZFCPWindow.getScreen): Don't change fcp devs until going forward. 2004-10-04 Jeremy Katz * anaconda.spec: Bump version. * isys/devnodes.c: Add support more than 128 SCSI disks (#134575). * dispatch.py (installSteps): Remove my new typo. * partRequests.py (LogicalVolumeRequestSpec.getDevice): Fix changing of VG name carrying through to boot loader setup (#132213) * partitions.py (Partitions.writeKS): Include PPC PReP boot partition (#133934) * kickstart.py (KickstartBase.definePartition) Allow specifying the PPC PReP Boot partition as "part prepboot" * kickstart.py (KickstartBase.setPackageSelection): Fix a thinko in the arch-specific case. Also, add arch-specific removal (#133396) * lang-table: Fix Polish (#134554) * dispatch.py (installSteps): * installclass.py (BaseInstallClass.setSteps): * upgradeclass.py (InstallClass.setSteps): Add copylogs step. * packages.py (copyAnacondaLogs): Copy /tmp/anaconda.log and /tmp/syslog to /var/log/anaconda.log and /var/log/anaconda.syslog so that they exist post-install (#124370) * kickstart.py: Add logging of kickstart scripts with --log to %post/%pre, etc. Note that the filename is relative to use of --chroot or not. (#124370) 2004-10-04 Mike McLean * scripts/pkgorder: Add some command line options: --file to write to a file instead of stdout, --debug to increas the rpm verbosity, --product to set the product path. 2004-10-04 Karsten Hopp * loader2/linuxrc.s390: fix LCS PORTNAME 2004-10-04 Jeremy Katz * iutil.py (makeDriveDeviceNodes): Create more RAID devs (#134438) 2004-10-01 Jeremy Katz * anaconda.spec: Bump version. * installclass.py (BaseInstallClass.setZFCP): Add method for use in kickstart setting of zfcp config. * kickstart.py (KickstartBase.doZFCP): Add syntax for defining zfcp volumes in kickstart. Use --devnum=, --scsiid=, --wwpn=, --scsilun=, --fcplun=. All are required. (#130070, #133288) (KickstartBase.doAutoPart): Skip zfcpconfig (#133288) (KickstartBase.definePartition): Skip zfcpconfig (#133288) * isys/nfsmount.c (HAVE_NFSV3): Let's use NFSv3. Will fix using the DVD iso via nfsiso (#122032) * loader2/module-info: Fix megaraid_mbox module name (#134369) * loader2/driverdisk.c: Another uninitialized variable (#133996) * scripts/upd-instroot (PACKAGESGR): Actually add the zh_CN fonts package (#133330) 2004-09-30 Jeremy Katz * anaconda.spec: Bump version. * po/anaconda.pot, po/*.po: refresh-po * installclasses/workstation.py: * installclasses/rhel_ws.py: Install compat-arch-support and compat-arch-devel-support by default (#133514). s/OpenOffice/OpenOffice.org/ Mozilla isn't the web browser now. * installclasses/personal_desktop.py: * installclasses/server.py: * installclasses/rhel_as.py: * installclasses/rhel_es.py: * installclasses/rhel_desktop.py: Install compat-arch-support by default (#133514) s/OpenOffice/OpenOffice.org/ Mozilla isn't the web browser now. * installclasses/rhel_ws.py: * installclasses/rhel_desktop.py: Should say OpenOffice.org, not OpenOffice. * upgrade.py (upgradeFindPackages): If this is RHEL, warn if they're upgrading from < RHEL 3 (#134523) * fsset.py (FileSystemSet.makeLVMNodes): Try to fix upgrade traceback (#134258) * loader2/net.c: Make changing the DNS server work (#122554) 2004-09-30 Paul Nasrat * findpackageset.py: Improved arch handling (#133045) * findpackageset.py: Fix thinko with missing rpm.ts (#133045) 2004-09-29 Jeremy Katz * anaconda.spec: Bump version. * isys/isys.py (getDasdState): Unformatted dasd seem to show up as "basic" now instead of "ready" (#130123) * loader2/driverdisk.c: Fix hang with driver disks (#131112, #122952) * iw/examine_gui.py: Remove spurious option in upgrade combo (#134058) * iw/language_support_gui.py: Avoid changing default language when selecting additional languages (#134040) 2004-09-29 Paul Nasrat * findpackageset.py: Better arch handling for biarch system upgrades (#133045) 2004-09-28 Jeremy Katz * loader2/hdinstall.c (setKickstartHD): * loader2/urlinstall.c (setKickstartUrl): Make sure variables are initialized (#133996). * isys/isys.py (readSwapLabel): Add function to read label from swap filesystems. (readFSLabel): Read swap and JFS labels too. * fsset.py: Add support for label'ing swap filesystems (#127892). * anaconda: Lack of a mouse if using remote display shouldn't ask about the mouse type (#133902) 2004-09-27 Jeremy Katz * anaconda.spec: Bump version * iw/zfcp_gui.py (ZFCPWindow.getNext): Update FCP config after adding SCSI LUNs (#133290) * autopart.py (doAutoPartition): Fix LVM traceback if going back from not enough space (#131325) * isys/isys.py (getGeometry): Remove unused function. * isys/isys.c (doGetGeometry): Likewise. * anaconda.spec: Bump version. * loader2/driverdisk.c: Don't try to mount as ext3 (we don't have the module). If we haven't mounted a partition, don't fail the driver disk load (#133036) * loader2/hardware.c: we need to always do our busprobe (fixes nonet, etc) * loader2/loader.c: noprobe ==> nousb and nofirewire * kickstart.py: Allow name.arch syntax for selecting a package in %packages (#124456) * iw/partition_dialog_gui.py (PartitionEditor.run): * iw/raid_dialog_gui.py (RaidEditor.run): Update SpinButtons before getting their value (#133456) * iw/language_support_gui.py (LanguageSupportWindow.rebuild_combo): Fix traceback when unselecting last language (#133164) * fsset.py (swapFileSystem.mount): Skip version 0 swaps (#122101) * partedUtils.py (sniffFilesystemType): Don't accept version 0 swaps as swap * kickstart.py (KickstartBase.definePartition): strip /dev from --onpart (inspired by #121486) * loader2/hdinstall.c: skip over /dev if given for path (#121486) * lang-table: Use no instead of no-latin1 as Norwegian keyboard (#133757) * loader2/loader.c: Load dm-zero, dm-snapshot and dm-mirror (#132001) * scripts/mk-images.i386: * scripts/mk-images.ia64: * scripts/mk-images.ppc: * scripts/mk-images.s390: * scripts/mk-images.x86_64: Use a variable for raid and lvm modules. Add dm-zero, dm-snapshot and dm-mirror (#132001) 2004-09-24 Jeremy Katz * anaconda.spec: Bump version * iw/partition_gui.py (PartitionWindow.populate): * textw/partition_text.py (PartitionWindow.populate): Free space isn't active, so we can't just ignore it. Instead, just ignore non-active partitions of < 1 MB (#133425) * installclasses/rhel_as.py: * installclasses/rhel_desktop.py: * installclasses/rhel_es.py: * installclasses/rhel_ws.py: Add installclasses for Red Hat Enterprise Linux (hidden) for translation purposes. * loader2/Makefile (VERSION): Define VERSION. * Makefile: Define VERSION and RELEASE here. * Makefile.inc (VERSION): * Makefile.inc (RELEASE): Move to Makefile * loader2/module-info: Add 3w-9xxx (#133525) * scripts/upd-instroot: Switch back to default zh_CN font instead of the bitmap one (#133330) 2004-09-23 Jeremy Katz * loader2/getparts.c (isPartitionName): i2o devices don't use a "p" separator (#133379) * iutil.py (makeDriveDeviceNodes): Create more RAID devices. (makeDriveDeviceNodes): i2o devices don't use a "p" separator (#133379) * loader2/cdinstall.c: Don't use PROBE_LOADED for cd probing (#131033) * loader2/hardware.c: We can always probe devices with current supported hardware. (#132592) 2004-09-23 Bill Nottingham * loader2/module-info, scripts/mk-images.*: fix megaraid module name 2004-09-22 Jeremy Katz * anaconda.spec: Bump version. * fsset.py (DevptsFileSystem.isMountable): Don't mount /dev/pts during install (#133301) * scripts/splittree.py: Fix for SRPMs (#122737) * bootdisk/i386/syslinux.cfg: * bootdisk/x86_64/syslinux.cfg: Add localboot option (#120687). * scripts/mk-images.ia64: * scripts/mk-images.x86_64 Remove spurious fi * textw/firewall_text.py: Oops, fix syntax error 2004-09-21 Jeremy Katz * anaconda.spec: Bump version * lang-table (Arabic): Don't attempt Arabic text mode (#122228) * scripts/upd-instroot (KEEPFILEGR): Add KacstQura font (#122228) * scripts/mk-images.x86_64: Add a README in the images/pxeboot dir. * scripts/mk-images.ia64: Create an images/pxeboot directory with the kernel + initrd used in the boot.img. * loader2/net.c (chooseNetworkInterface): Support using ksdevice=macaddr instead of ksdevice=link or ksdevice=ethX. Should sanitize the mac address to handle most sane formats (#130605). * isys/getmacaddr.c (sanitizeMacAddr): Add function. * isys/getmacaddr.h (sanitizeMacAddr): Add prototype. * Makefile: Get 'make build' working with build system changes. 2004-09-21 Jeremy Katz * anaconda.spec: * Makefile: * Makefile.inc: Rework build to not get date substituted in with a snapbuild. Include changes explicitly in package changelog.