glusterfs.git/xlators/protocol/server/src/Makefile.am, branch v5.0rc0

build: add --enable-asan configure options

2018-08-30T05:41:26+00:00

Introduce a `./configure --enable-asan` to build with
`-fsanitize=address -fno-omit-frame-pointer` options. This uses the
libasan.so shared library, so that needs to be available.

While running builds with the ASAN options, several linker issues
surfaced and these have been addressed with this change as well.
Building with --enable-asan has been tested on Fedora 28.

Change-Id: I428a9da70dd8f7d0056cfbe5c398619a571469b2
Updates: #492
Signed-off-by: Niels de Vos

build: add --without-server option

2018-02-19T17:38:55+00:00

With Gluster 4.0 we will not provide the server components for EL6 and
older. At one point Gluster 4.x will get GlusterD2, which requires
Golang tools in the distribution. EL6 does not contain these at the
moment.

With this change, it is possible to `./configure --without-server` which
prevents building glusterd and the xlators for the bricks. Building RPMs
can pass `--without server` and the glusterfs-server sub-package will
not be created.

Change-Id: I97f5ccf9f2c76e60d9af83915fc59fae57ad6d25
BUG: 1074947
Signed-off-by: Niels de Vos

protocol: make on-wire-change of protocol using new XDR definition.

2018-01-19T17:18:39+00:00

With this patchset, some major things are changed in XDR, mainly:

* Naming: Instead of gfs3/gfs4 settle for gfx_ for xdr structures
* add iattx as a separate structure, and add conversion methods
* the *_rsp structure is now changed, and is also reduced in number
  (ie, no need for different strucutes if it is similar to other response).
* use proper XDR methods for sending dict on wire.

Also, with the change of xdr structure, there are changes needed
outside of xlator protocol layer to handle these properly. Mainly
because the abstraction was broken to support 0-copy RDMA with payload
for write and read FOP. This made transport layer know about the xdr
payload, hence with the change of xdr payload structure, transport layer
needed to know about the change.

Updates #384

Change-Id: I1448fbe9deab0a1b06cb8351f2f37488cefe461f
Signed-off-by: Amar Tumballi

glusterfs: Not able to mount running volume after enable brick mux and stopped any volume

2017-05-31T20:43:53+00:00

Problem: After enabled brick mux if any volume has down and then try ot run mount
         with running volume , mount command is hung.

Solution: After enable brick mux server has shared one data structure server_conf
          for all associated subvolumes.After down any subvolume in some
          ungraceful manner (remove brick directory) posix xlator sends
          GF_EVENT_CHILD_DOWN event to parent xlatros and server notify
          updates the child_up to false in server_conf.When client is trying
          to communicate with server through mount it checks conf->child_up
          and it is FALSE so it throws message "translator are not yet ready".
          From this patch updated structure server_conf to save child_up status
          for xlator wise. Another improtant correction from this patch is
          cleanup threads from server side xlators after stop the volume.

BUG: 1453977
Change-Id: Ic54da3f01881b7c9429ce92cc569236eb1d43e0d
Signed-off-by: Mohit Agrawal 
Reviewed-on: https://review.gluster.org/17356
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Raghavendra Talur 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

build: out-of-tree builds generates files in the wrong directory

2016-09-18T16:34:37+00:00

And minor cleanup of a few of the Makefile.am files while we're
at it.

Rewrite the make rules to do what xdrgen does. Now we can get rid
of xdrgen.

Note 1. netbsd6's sed doesn't do -i. Why are we still running
smoke tests on netbsd6 and not netbsd7? We barely support netbsd7
as it is.

Note 2. Why is/was libgfxdr.so (.../rpc/xdr/src/...) linked with
libglusterfs? A cut-and-paste mistake? It has no references to
symbols in libglusterfs.

Note3. "/#ifndef\|#define\|#endif/" (note the '\'s) is a _basic_
regex that matches the same lines as the _extended_ regex
"/#(ifndef|define|endif)/". To match the extended regex sed needs to
be run with -r on Linux; with -E on *BSD. However NetBSD's and
FreeBSD's sed helpfully also provide -r for compatibility. Using a
basic regex avoids having to use a kludge in order to run sed with
the correct option on OS X.

Note 4. Not copying the bit of xdrgen that inserts copyright/license
boilerplate. AFAIK it's silly to pretend that machine generated
files like these can be copyrighted or need license boilerplate.
The XDR source files have their own copyright and license; and
their copyrights are bound to be more up to date than old
boilerplate inserted by a script. From what I've seen of other
Open Source projects -- e.g. gcc and its C parser files generated
by yacc and lex -- IIRC they don't bother to add copyright/license
boilerplate to their generated files.

It appears that it's a long-standing feature of make (SysV, BSD,
gnu) for out-of-tree builds to helpfully pretend that the source
files it can find in the VPATH "exist" as if they are in the $cwd.
rpcgen doesn't work well in this situation and generates files
with "bad" #include directives.

E.g. if you `rpcgen ../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.x`,
you get an #include directive in the generated .c file like this:

  ...
  #include "../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.h"
  ...

which (obviously) results in compile errors on out-of-tree build
because the (generated) header file doesn't exist at that location.
Compared to `rpcgen ./glusterfs3-xdr.x` where you get:

  ...
  #include "glusterfs3-xdr.h"
  ...

Which is what we need. We have to resort to some Stupid Make Tricks
like the addition of various .PHONY targets to work around the VPATH
"help".

Warning: When doing an in-tree build, -I$(top_builddir)/rpc/xdr/...
looks exactly like -I$(top_srcdir)/rpc/xdr/...  Don't be fooled though.
And don't delete the -I$(top_builddir)/rpc/xdr/... bits

Change-Id: Iba6ab96b2d0a17c5a7e9f92233993b318858b62e
BUG: 1330604
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/14085
Tested-by: Niels de Vos 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Niels de Vos

protocol/server: Implementation of compound fop

2016-05-02T01:05:31+00:00

Change-Id: I981258afa527337dd2ad33eecba7fc8084238e6d
BUG: 1303829
Signed-off-by: Anuradha Talur 
Reviewed-on: http://review.gluster.org/14137
Smoke: Gluster Build System 
Reviewed-by: Niels de Vos 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

build: export minimum symbols from xlators for correct resolution

2015-12-22T17:15:01+00:00

Revisiting http://review.gluster.org/#/c/11814/, which unintentionally
introduced warnings from libtool about the xlator .so names.

According to [1], the -module option must appear in the Makefile.am
file(s); if -module is defined in a macro, e.g. in configure(.ac),
then libtool will not recognize that this is a module and will emit a
warning.

[1]
http://www.gnu.org/software/automake/manual/automake.html#Libtool-Modules

Change-Id: Ifa5f9327d18d139597791c305aa10cc4410fb078
BUG: 1248669
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/13003
Tested-by: NetBSD Build System 
Tested-by: Gluster Build System 
Reviewed-by: soumya k 
Reviewed-by: Niels de Vos

build: install and package header files more conventionally

2015-11-16T09:15:04+00:00

The current way we install and package header files for the -devel
package is a hack. This patch uses more conventional autoconf, libtool,
and rpmbuild idioms to package -devel headers and libraries.

Change-Id: I63ffb3460f5c12b6b355493bd00824ac9e5354c5
BUG: 1271907
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/12360
Tested-by: NetBSD Build System 
Tested-by: Gluster Build System 
Reviewed-by: Niels de Vos

build: export minimum symbols from xlators for correct resolution

2015-09-24T14:37:42+00:00

We've been lucky that we haven't had any symbol collisions until now.
Now we have a collision between the snapview-client's svc_lookup() and
libntirpc's svc_lookup() with nfs-ganesha's FSAL_GLUSTER and libgfapi.

As a short term solution all the snapview-client's FOP methods were
changed to static scope. See http://review.gluster.org/11805. This
works in snapview-client because all the FOP methods are defined in
a single source file. This solution doesn't work for other xlators
with FOP methods defined in multiple source files.

To address this we link with libtool's '-export-symbols $symbol-file'
(a wrapper around `ld --version-script ...` --- on linux anyway) and
only export the minimum required symbols from the xlator sharedlib.

N.B. the libtool man page says that the symbol file should be named
foo.sym, thus the rename of *.exports to *.sym. While foo.exports
worked, we will follow the documentation.

Signed-off-by: Kaleb S. KEITHLEY 
BUG: 1248669
Change-Id: I1de68b3e3be58ae690d8bfb2168bfc019983627c
Reviewed-on: http://review.gluster.org/11814
Tested-by: NetBSD Build System 
Tested-by: Gluster Build System 
Reviewed-by: soumya k 
Reviewed-by: Niels de Vos

protocol/server : port log messages to new framework.

2015-04-30T05:33:41+00:00

Change-Id: I7901f55d06716161cc31d2b79a600a16b5ec2ef8
BUG: 1194640
Signed-off-by: Manikandan Selvaganesh 
Reviewed-on: http://review.gluster.org/9874
Tested-by: Gluster Build System 
Reviewed-by: Raghavendra G 
Tested-by: Raghavendra G