glusterfs.git/xlators/features/locks/src/posix.c, branch v3.8dev

libglusterfs/syncop: Add xdata to all syncop calls

2015-04-08T15:14:59+00:00

This patch adds support for xdata in both the
request and response path of syncops.

Few calls like lookup already had the support;
have renamed variables in few places to maintain
uniformity.

xdata passed downwards is known as xdata_in
and xdata passed upwards is known as xdata_out.

There is an old patch by Jeff Darcy at
http://review.gluster.org/#/c/8769/3 which does the
same for some selected calls. It also brings in
xdata support at gfapi level.

xdata support at gfapi level would be introduced
in subsequent patches.

Change-Id: I340e94ebaf2a38e160e65bc30732e8fe1c532dcc
BUG: 1158621
Signed-off-by: Raghavendra Talur 
Reviewed-on: http://review.gluster.org/9859
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

Avoid conflict between contrib/uuid and system uuid

2015-04-04T17:48:35+00:00

glusterfs relies on Linux uuid implementation, which
API is incompatible with most other systems's uuid. As
a result, libglusterfs has to embed contrib/uuid,
which is the Linux implementation, on non Linux systems.
This implementation is incompatible with systtem's
built in, but the symbols have the same names.

Usually this is not a problem because when we link
with -lglusterfs, libc's symbols are trumped. However
there is a problem when a program not linked with
-lglusterfs will dlopen() glusterfs component. In
such a case, libc's uuid implementation is already
loaded in the calling program, and it will be used
instead of libglusterfs's implementation, causing
crashes.

A possible workaround is to use pre-load libglusterfs
in the calling program (using LD_PRELOAD on NetBSD for
instance), but such a mechanism is not portable, nor
is it flexible. A much better approach is to rename
libglusterfs's uuid_* functions to gf_uuid_* to avoid
any possible conflict. This is what this change attempts.

BUG: 1206587
Change-Id: I9ccd3e13afed1c7fc18508e92c7beb0f5d49f31a
Signed-off-by: Emmanuel Dreyfus 
Reviewed-on: http://review.gluster.org/10017
Tested-by: Gluster Build System 
Reviewed-by: Niels de Vos

libglusterfs: change signature of syncop_(f)getxattr

2015-01-06T06:00:09+00:00

Pass xdata dict to syncop_(f)getxattr calls.

This patch [1/3] is required as a part of afr automated split-brain resolution
implementation.

Change-Id: I3970b3dd6daf64681a031e37f8e9afb14fb3d668
BUG: 1136769
Signed-off-by: Ravishankar N 
Reviewed-on: http://review.gluster.org/9375
Reviewed-by: Pranith Kumar Karampuri 
Reviewed-by: Niels de Vos 
Tested-by: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan 
Reviewed-by: Vijay Bellur

mgmt/glusterd: Add option to enable lock trace

2014-12-29T05:18:42+00:00

Change-Id: I24ed0f866d53e91a8323c043a38f73207cbfd7d2
BUG: 1168189
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/9351
Reviewed-by: Krutika Dhananjay 
Tested-by: Gluster Build System 
Reviewed-by: Krishnan Parthasarathi 
Tested-by: Krishnan Parthasarathi

Changes in statedump for stack, frame, locks

2014-07-07T17:27:00+00:00

Internal call-stacks don't have lk-owner so it is a bit
difficult to confirm if a stack hung by comparing two
statedump files. This change prints call-stack, frame's
address. This should solve the comparison problem.

Lock times and log times don't have same timezone because
of which one has to manually convert the times for debugging
the issues. This change prints blocked, granted times also
in UTC.

Also fixed line truncation issue when client-unique-string
is big.

Change-Id: I116372c0d63476823a36ca6dbfba91648f9234cc
BUG: 1114188
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/8197
Tested-by: Gluster Build System 
Reviewed-by: Raghavendra Bhat 
Reviewed-by: Ravishankar N 
Reviewed-by: Vijay Bellur

build: MacOSX Porting fixes

2014-04-24T21:41:48+00:00

git@forge.gluster.org:~schafdog/glusterfs-core/osx-glusterfs

Working functionality on MacOSX

 - GlusterD (management daemon)
 - GlusterCLI (management cli)
 - GlusterFS FUSE (using OSXFUSE)
 - GlusterNFS (without NLM - issues with rpc.statd)

Change-Id: I20193d3f8904388e47344e523b3787dbeab044ac
BUG: 1089172
Signed-off-by: Harshavardhana 
Signed-off-by: Dennis Schafroth 
Tested-by: Harshavardhana 
Tested-by: Dennis Schafroth 
Reviewed-on: http://review.gluster.org/7503
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

syncop: Change return value of syncop

2014-01-20T07:05:15+00:00

Problem:
We found a day-1 bug when syncop_xxx() infra is used inside a synctask with
compilation optimization (CFLAGS -O2).

Detailed explanation of the Root cause:
We found the bug in 'gf_defrag_migrate_data' in rebalance operation:

Lets look at interesting parts of the function:

int
gf_defrag_migrate_data (xlator_t *this, gf_defrag_info_t *defrag, loc_t *loc,
                        dict_t *migrate_data)
{
.....
code section - [ Loop ]
        while ((ret = syncop_readdirp (this, fd, 131072, offset, NULL,
                                       &entries)) != 0) {
.....
code section - [ ERRNO-1 ] (errno of readdirp is stored in readdir_operrno by a
thread)
                /* Need to keep track of ENOENT errno, that means, there is no
                   need to send more readdirp() */
                readdir_operrno = errno;
.....
code section - [ SYNCOP-1 ] (syncop_getxattr is called by a thread)
                        ret = syncop_getxattr (this, &entry_loc, &dict,
                                               GF_XATTR_LINKINFO_KEY);
code section - [ ERRNO-2]   (checking for failures of syncop_getxattr(). This
may not always be executed in same thread which executed [SYNCOP-1])
                        if (ret < 0) {
                                if (errno != ENODATA) {
                                        loglevel = GF_LOG_ERROR;
                                        defrag->total_failures += 1;
.....
}

the function above could be executed by thread(t1) till [SYNCOP-1] and code
from [ERRNO-2] can be executed by a different thread(t2) because of the way
syncop-infra schedules the tasks.

when the code is compiled with -O2 optimization this is the assembly code that
is generated:
 [ERRNO-1]
1165                        readdir_operrno = errno; <<---- errno gets expanded
as *(__errno_location())
   0x00007fd149d48b60 <+496>:        callq  0x7fd149d410c0 
   0x00007fd149d48b72 <+514>:        mov    %rax,0x50(%rsp) <<------ Address
returned by __errno_location() is stored in a special location in stack for
later use.
   0x00007fd149d48b77 <+519>:        mov    (%rax),%eax
   0x00007fd149d48b79 <+521>:        mov    %eax,0x78(%rsp)
....
 [ERRNO-2]
1281                                        if (errno != ENODATA) {
   0x00007fd149d492ae <+2366>:        mov    0x50(%rsp),%rax <<-----  Because
it already stored the address returned by __errno_location(), it just
dereferences the address to get the errno value. BUT THIS CODE NEED NOT BE
EXECUTED BY SAME THREAD!!!
   0x00007fd149d492b3 <+2371>:        mov    $0x9,%ebp
   0x00007fd149d492b8 <+2376>:        mov    (%rax),%edi
   0x00007fd149d492ba <+2378>:        cmp    $0x3d,%edi

The problem is that __errno_location() value of t1 and t2 are different. So
[ERRNO-2] ends up reading errno of t1 instead of errno of t2 even though t2 is
executing [ERRNO-2] code section.

When code is compiled without any optimization for [ERRNO-2]:
1281                                        if (errno != ENODATA) {
   0x00007fd58e7a326f <+2237>:        callq  0x7fd58e797300
<<--- As it is calling __errno_location() again it gets the
location from t2 so it works as intended.
   0x00007fd58e7a3274 <+2242>:        mov    (%rax),%eax
   0x00007fd58e7a3276 <+2244>:        cmp    $0x3d,%eax
   0x00007fd58e7a3279 <+2247>:        je     0x7fd58e7a32a1


Fix:
Make syncop_xxx() return (-errno) value as the return value in
case of errors and all the functions which make syncop_xxx() will need to use
(-ret) to figure out the reason for failure in case of syncop_xxx() failures.

Change-Id: I314d20dabe55d3e62ff66f3b4adb1cac2eaebb57
BUG: 1040356
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/6475
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

locks: various fixes

2014-01-14T05:44:19+00:00

- implement ref/unref of entry locks (and fix bad pointer deref crashes)
- code cleanup and deleted various data types
- fix improper read/write lock conflict detection in entrylk
- fix indefinite hang of blocked locks on disconnect
- register locks in client_t synchronously, fix crashes in disconnect path

Change-Id: Id273690c9111b8052139d1847060d1fb5a711924
BUG: 849630
Signed-off-by: Anand Avati 
Reviewed-on: http://review.gluster.org/6638
Tested-by: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Vijay Bellur

client_t: phase 2, refactor server_ctx and locks_ctx out

2013-10-31T16:32:50+00:00

remove server_ctx and locks_ctx from client_ctx directly and store as
into discrete entities in the scratch_ctx

hooking up dump will be in phase 3

BUG: 849630
Change-Id: I94cea328326db236cdfdf306cb381e4d58f58d4c
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/5678
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

features/locks : Improves debuggability of inode/entry locks.

2013-09-03T13:50:40+00:00

Prints, in the statedump, the information about the mount that
performed the inode/entry lk.

For the entrylks that are granted after a blocked state, the
blocked time is not printed. A patch for that will be sent
later.

Change-Id: Ib0c1ed21fa9328b435f96b590dd343f59814a08d
BUG: 915629
Signed-off-by: Anuradha Talur 
Reviewed-on: http://review.gluster.org/5712
Reviewed-by: Pranith Kumar Karampuri 
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur