Problem: In a hyperconverged setup with granular-entry-heal enabled, if a file is recreated while one of the bricks is down, and an index heal is triggered (with the brick still down), entry-self heal was doing a spurious heal with just the 2 good bricks. It was doing a post-op leading to removal of the filename from .glusterfs/indices/entry-changes as well as erroneous setting of afr xattrs on the parent. When the brick came up, the xattrs were cleared, resulting in the renamed file not getting healed and leading to gfid split-brain and EIO on the mount. Fix: Proceed with entry heal only when shd can connect to all bricks of the replica, just like in data and metadata heal. fixes: #1103 Change-Id: I916ae26ad1fabf259bc6362da52d433b7223b17e Signed-off-by: Ravishankar N <ravishankar@redhat.com> (cherry picked from commit 06453d77d056fbaa393a137ca277a20e38d2f67e)
...if pending xattrs are zero for all children. Problem: If there are no pending xattrs and a metadata heal needs to be performed, it can be possible that we end up with xattrs inadvertendly deleted from all bricks, as explained in the BZ. Fix: After picking one among the sources as the good copy, mark pending xattrs on all sources to blame the sinks. Now even if this metadata heal fails midway, a subsequent heal will still choose one of the valid sources that it picked previously. Updates: #1067 Change-Id: If1b050b70b0ad911e162c04db4d89b263e2b8d7b Signed-off-by: Ravishankar N <ravishankar@redhat.com> (cherry picked from commit 2d5ba449e9200b16184b1e7fc84cabd015f1f779)
Problem: We currently don't have a roll-back/undoing of post-ops if quorum is not met. Though the FOP is still unwound with failure, the xattrs remain on the disk. Due to these partial post-ops and partial heals (healing only when 2 bricks are up), we can end up in metadata split-brain purely from the afr xattrs point of view i.e each brick is blamed by atleast one of the others for metadata. These scenarios are hit when there is frequent connect/disconnect of the client/shd to the bricks. Fix: Pick a source based on the xattr values. If 2 bricks blame one, the blamed one must be treated as sink. If there is no majority, all are sources. Once we pick a source, self-heal will then do the heal instead of erroring out due to split-brain. This patch also adds restriction of all the bricks to be up to perform metadata heal to avoid any metadata loss. Removed the test case tests/bugs/replicate/bug-1468279-source-not-blaming-sinks.t as it was doing metadata heal even when only 2 of 3 bricks were up. Change-Id: I07a9d62f84ceda329dcab1f02a33aeed258dcb09 fixes: bz#1806931 Signed-off-by: karthik-us <ksubrahm@redhat.com>
If an open comes on a file when a brick is down and after the brick comes up, a fop comes on the fd, client xlator would still wind the fop on anon-fd leading to wrong behavior of the fops in some cases. Example: If lk fop is issued on the fd just after the brick is up in the scenario above, lk fop will be sent on anon-fd instead of failing it on that client xlator. This lock will never be freed upon close of the fd as flush on anon-fd is invalid and is not wound below server xlator. As a fix, failing the fop unless the fd has FALLBACK_TO_ANON_FD flag. > Change-Id: I77692d056660b2858e323bdabdfe0a381807cccc > fixes bz#1390914 > Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Change-Id: I77692d056660b2858e323bdabdfe0a381807cccc fixes bz#1808256 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com>
Backport of https://review.gluster.org/#/c/glusterfs/+/23288/ ...whenever shd is re-enabled after disabling or there is a change in `cluster.heal-timeout`, without needing to restart shd or waiting for the current `cluster.heal-timeout` seconds to expire. See BZ 1743988 for more details. Change-Id: Ia5ebd7c8e9f5b54cba3199c141fdd1af2f9b9bfe fixes: bz#1807431 Reported-by: Glen Kiessling <glenk1973@hotmail.com> Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Problem: Since commit 600ba94183333c4af9b4a09616690994fd528478, shd starts healing as soon as it is toggled from disabled to enabled. This was causing the following line in the .t to fail on a 'fast' machine (always on my laptop and sometimes on the jenkins slaves). EXPECT_NOT "^0$" get_pending_heal_count $V0 because by the time shd was disabled, the heal was already completed. Fix: Increase the no. of files to be healed and make it a variable called FILE_COUNT, should we need to bump it up further because the machines become even faster. Also created pending metadata heals to increase the time taken to heal a file. fixes: bz#1807748 Change-Id: I5a26b08e45b8c19bce3c01ce67bdcc28ed48198d Signed-off-by: Ravishankar N <ravishankar@redhat.com> (cherry picked from commit 724c657995a2e148243eeb78c68b620c6d7714a5)
Problem: At the time of coming up one server node(1x3) after reboot
client is unmounted.The client is unmounted because a client
is getting AUTH_FAILED event and client call fini for the graph.The
client is getting AUTH_FAILED because brick is not attached with a
graph at that moment
Solution: To avoid the unmounting the client graph throw ENOENT error
from server in case if brick is not attached with server at
the time of authenticate clients.
> Credits: Xavi Hernandez <xhernandez@redhat.com>
> Change-Id: Ie6fbd73cbcf23a35d8db8841b3b6036e87682f5e
> Fixes: bz#1793852
> Signed-off-by: Mohit Agrawal <moagrawa@redhat.com>
> (cherry picked from commit f6421dff22a6ddaf14134f6894deae219948c89d)
Fixes: bz#1804512
Change-Id: Ie6fbd73cbcf23a35d8db8841b3b6036e87682f5e
Signed-off-by: Mohit Agrawal <moagrawa@redhat.com>
Currently EC tries to reopen fd's that have been opened while a brick was down. This is done as part of regular write operations, just after having acquired the locks, and it's sent as a sub-fop of the main write fop. There were two problems: 1. The reopen was attempted on all UP bricks, even if a previous lock didn't succeed. This is incorrect because most probably the open will fail. 2. If reopen is sent and fails, the error is propagated to the main operation, causing it to fail when it shouldn't. To fix this, we only attempt reopens on bricks where the current fop owns a lock, and we prevent any error to be propagated to the main fop. To implement this behaviour an argument used to indicate the minimum number of required answers has overloaded to also include some flags. To make the change consistent, it has been necessary to rename the argument, which means that a lot of files have been changed. However there are no functional changes. This change has also uncovered a problem in discard code, which didn't correctely process requests of small sizes because no real discard fop was being processed, only a write of 0's on some region. In this case some fields of the fop remained uninitialized or with incorrect values. To fix this, a new function has been created to simulate success on a fop and it's used in the discard case. Thanks to Pranith for providing a test script that has also detected an issue in this patch. This patch includes a small modification of this script to force data to be written into bricks before stopping them. Change-Id: If272343873369186c2fb8f43c1d9c52c3ea304ec Fixes: bz#1805047 Signed-off-by: Xavi Hernandez <xhernandez@redhat.com>
Problem: In a situation where B1 blames B2, B2 blames B1 and B3 doesn't blame anything for entry heal, heal will not complete even though we have clear source and sinks. This will happen because while doing afr_selfheal_find_direction() only the bricks which are blamed by non-accused bricks are considered as sinks. Later in __afr_selfheal_entry_finalize_source() when it tries to mark all the non-sources as sinks it fails to do so because there won't be any healed_sinks marked, no witness present and there will be a source. Fix: If there is a source and no healed_sinks, then reset all the locked sources to 0 and healed sinks to 1 to do conservative merge. Change-Id: If40d8bc95d52a52b2730f55bdcf135109b421548 Fixes: bz#1760710 Signed-off-by: karthik-us <ksubrahm@redhat.com>
We were not passing xattr_req when doing a name self heal as well as a meta data heal. Because of this, some xdata was missing which causes i/o errors Backport of>https://review.gluster.org/#/c/glusterfs/+/23024/ >Change-Id: Ibfb1205a7eb0195632dc3820116ffbbb8043545f >Fixes: bz#1728770 >Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Change-Id: I740ccdbfcf2667fe4a850c12ecdc4b9eeed08293 Fixes: bz#1749352 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>