Problem: In a hyperconverged setup with granular-entry-heal enabled, if a file is recreated while one of the bricks is down, and an index heal is triggered (with the brick still down), entry-self heal was doing a spurious heal with just the 2 good bricks. It was doing a post-op leading to removal of the filename from .glusterfs/indices/entry-changes as well as erroneous setting of afr xattrs on the parent. When the brick came up, the xattrs were cleared, resulting in the renamed file not getting healed and leading to gfid split-brain and EIO on the mount. Fix: Proceed with entry heal only when shd can connect to all bricks of the replica, just like in data and metadata heal. fixes: #1103 Change-Id: I916ae26ad1fabf259bc6362da52d433b7223b17e Signed-off-by: Ravishankar N <ravishankar@redhat.com> (cherry picked from commit 06453d77d056fbaa393a137ca277a20e38d2f67e)
...if pending xattrs are zero for all children. Problem: If there are no pending xattrs and a metadata heal needs to be performed, it can be possible that we end up with xattrs inadvertendly deleted from all bricks, as explained in the BZ. Fix: After picking one among the sources as the good copy, mark pending xattrs on all sources to blame the sinks. Now even if this metadata heal fails midway, a subsequent heal will still choose one of the valid sources that it picked previously. Updates: #1067 Change-Id: If1b050b70b0ad911e162c04db4d89b263e2b8d7b Signed-off-by: Ravishankar N <ravishankar@redhat.com> (cherry picked from commit 2d5ba449e9200b16184b1e7fc84cabd015f1f779)
Problem: We currently don't have a roll-back/undoing of post-ops if quorum is not met. Though the FOP is still unwound with failure, the xattrs remain on the disk. Due to these partial post-ops and partial heals (healing only when 2 bricks are up), we can end up in metadata split-brain purely from the afr xattrs point of view i.e each brick is blamed by atleast one of the others for metadata. These scenarios are hit when there is frequent connect/disconnect of the client/shd to the bricks. Fix: Pick a source based on the xattr values. If 2 bricks blame one, the blamed one must be treated as sink. If there is no majority, all are sources. Once we pick a source, self-heal will then do the heal instead of erroring out due to split-brain. This patch also adds restriction of all the bricks to be up to perform metadata heal to avoid any metadata loss. Removed the test case tests/bugs/replicate/bug-1468279-source-not-blaming-sinks.t as it was doing metadata heal even when only 2 of 3 bricks were up. Change-Id: I07a9d62f84ceda329dcab1f02a33aeed258dcb09 fixes: bz#1806931 Signed-off-by: karthik-us <ksubrahm@redhat.com>
Backport of https://review.gluster.org/#/c/glusterfs/+/23288/ ...whenever shd is re-enabled after disabling or there is a change in `cluster.heal-timeout`, without needing to restart shd or waiting for the current `cluster.heal-timeout` seconds to expire. See BZ 1743988 for more details. Change-Id: Ia5ebd7c8e9f5b54cba3199c141fdd1af2f9b9bfe fixes: bz#1807431 Reported-by: Glen Kiessling <glenk1973@hotmail.com> Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Problem: In a situation where B1 blames B2, B2 blames B1 and B3 doesn't blame anything for entry heal, heal will not complete even though we have clear source and sinks. This will happen because while doing afr_selfheal_find_direction() only the bricks which are blamed by non-accused bricks are considered as sinks. Later in __afr_selfheal_entry_finalize_source() when it tries to mark all the non-sources as sinks it fails to do so because there won't be any healed_sinks marked, no witness present and there will be a source. Fix: If there is a source and no healed_sinks, then reset all the locked sources to 0 and healed sinks to 1 to do conservative merge. Change-Id: If40d8bc95d52a52b2730f55bdcf135109b421548 Fixes: bz#1760710 Signed-off-by: karthik-us <ksubrahm@redhat.com>
We were not passing xattr_req when doing a name self heal as well as a meta data heal. Because of this, some xdata was missing which causes i/o errors Backport of>https://review.gluster.org/#/c/glusterfs/+/23024/ >Change-Id: Ibfb1205a7eb0195632dc3820116ffbbb8043545f >Fixes: bz#1728770 >Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Change-Id: I740ccdbfcf2667fe4a850c12ecdc4b9eeed08293 Fixes: bz#1749352 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
When eager-lock lock acquisition fails because of say network failures, the local is not being removed from owners_list, this leads to accumulation of waiting frames and the application will hang because the waiting frames are under the assumption that another transaction is in the process of acquiring lock because owner-list is not empty. Handled this case as well in this patch. Added asserts to make it easier to find these problems in future. fixes bz#1699736 Change-Id: I3101393265e9827755725b1f2d94a93d8709e923 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
Problem: In an arbiter volume configuration SHD will not send any writes onto the arbiter brick even if there is data pending marker for the arbiter brick. If we have a arbiter setup on the geo-rep master and there are data pending markers for the files on arbiter brick, SHD will not mark any data changelog during healing. While syncing the data from master to slave, if the arbiter-brick is considered as ACTIVE, then there is a chance that slave will miss out some data. If the arbiter brick is being newly added or replaced there is a chance of slave missing all the data during sync. Fix: If there is data pending marker for the arbiter brick, send truncate on the arbiter brick during heal, so that it will record truncate as the data transaction in changelog. Change-Id: I3242ba6cea6da495c418ef860d9c3359c5459dec fixes: bz#1687687 Signed-off-by: karthik-us <ksubrahm@redhat.com>
Problem: If parent dir is in split-brain or has dirty xattrs set, and the file has gfid missing on one of the bricks, then name heal won't assign the gfid. Fix: Use the brick we select the gfid from as the 'source'. Note: Problem was found while trying to debug a split-brain issue on Cynthia Zhou's setup. fixes: bz#1655545 Change-Id: Id088d4f0fb017aa35122de426654194e581ed742 Reported-by: Cynthia Zhou <cynthia.zhou@nokia-sbell.com> Signed-off-by: Ravishankar N <ravishankar@redhat.com> (cherry picked from commit 4d58730c0cd6ab5db39aec8a15276f7bd3371b04)
Problem: https://review.gluster.org/#/c/glusterfs/+/21427/ seems to be failing this .t spuriously. On checking one of the failure logs, I see: 22:05:44 Launching heal operation to perform index self heal on volume patchy has been unsuccessful: 22:05:44 Self-heal daemon is not running. Check self-heal daemon log file. 22:05:44 not ok 20 , LINENUM:38 In glusterd log: [2018-10-18 22:05:44.298832] E [MSGID: 106301] [glusterd-syncop.c:1352:gd_stage_op_phase] 0-management: Staging of operation 'Volume Heal' failed on localhost : Self-heal daemon is not running. Check self-heal daemon log file But the tests which preceed this check whether via a statedump if the shd is conected to the bricks, and they have succeeded and even started healing. From glustershd.log: [2018-10-18 22:05:40.975268] I [MSGID: 108026] [afr-self-heal-common.c:1732:afr_log_selfheal] 0-patchy-replicate-0: Completed data selfheal on 3b83d2dd-4cf2-4ea3-a33e-4275be40f440. sources=[0] 1 sinks=2 So the only reason I can see launching heal via cli failing is a race where shd has been spawned but glusterd has not yet updated in-memory that it is up, and hence failing the CLI. Fix: Check for shd up status before launching heal via CLI Change-Id: Ic88abf14ad3d51c89cb438db601fae4df179e8f4 fixes: bz#1641872 Signed-off-by: Ravishankar N <ravishankar@redhat.com> (cherry picked from commit 3dea105556130abd4da0fd3f8f2c523ac52398d1)