glusterfs.git/tests/bugs/cli, branch v3.12.5

glusterd: Add option to get all volume options through get-state CLI

2017-07-31T17:34:26+00:00

This commit makes the get-state CLI capable to returning the values
for all volume options for all volumes. This is similar to what you
get when you issue a `gluster volume get  all` command.

This is the new usage for the get-state CLI:

 # gluster get-state [] [[odir ] \
[file ]] [detail|volumeoptions]

> Reviewed-on: https://review.gluster.org/17858
> CentOS-regression: Gluster Build System 
> Reviewed-by: Atin Mukherjee 
> Reviewed-by: Gaurav Yadav 
> Smoke: Gluster Build System 

(cherry picked from commit 8dcf91660e0bd10eb75ef25a29ca02ec51c81be4)

Change-Id: Ice52d936a5a389c6fa0ba5ab32416a65cdfde46d
Fixes: #277
Signed-off-by: Samikshan Bairagya 
Reviewed-on: https://review.gluster.org/17874
Reviewed-by: Atin Mukherjee 
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System

cluster/ec: Non-disruptive upgrade on EC volume fails

2017-07-14T00:26:04+00:00

Problem:
Enabling optimistic changelog on EC volume was not
handling node down scenarios appropriately resulting
in volume data inaccessibility.

Solution:
Update dirty xattr appropriately on good bricks whenever
nodes are down. This would fix the metadata information
as part of heal and thus ensures data accessibility.

BUG: 1468261
Change-Id: I08b0d28df386d9b2b49c3de84b4aac1c729ac057
Signed-off-by: Sunil Kumar Acharya 
Reviewed-on: https://review.gluster.org/17703
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri

Fixes quota aux mount failure

2017-05-08T06:15:55+00:00

The aux mount is created on the first limit/remove_limit/list command
and it remains until volume is stopped / deleted / (quota is disabled)
, where we do a lazy unmount. If the process is uncleanly terminated,
then the mount entry remains and we get (Transport disconnected) error
on subsequent attempts to run quota list/limit-usage/remove commands.

Second issue, There is also a risk of inadvertent rm -rf on the
/var/run/gluster causing data loss for the user. Ideally, /var/run is
a temp path for application use and should not cause any data loss to
persistent storage.

Solution:
1) unmount the aux mount after each use.
2) clean stale mount before mounting, if any.

One caveat with doing mount/unmount on each command is that we cannot
use same mount point for both list and limit commands.
The reason for this is that list command needs mount to be accessible
in cli after response from glusterd, So it could be unmounted by a
limit command if executed in parallel (had we used same mount point)
Hence we use separate mount points for list and limit commands.

Change-Id: I4f9e39da2ac2b65941399bffb6440db8a6ba59d0
BUG: 1433906
Signed-off-by: Sanoj Unnikrishnan 
Reviewed-on: https://review.gluster.org/16938
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
Reviewed-by: Manikandan Selvaganesh 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra G 
Reviewed-by: Atin Mukherjee

glusterd: Add client details to get-state output

2017-04-13T03:43:08+00:00

This commit optionally adds client details corresponding to the
locally running bricks to the get-state output. Since getting
the client details involves sending RPC requests to the respective
local bricks, this is a relatively more costly operation. These
client details would be added to the get-state output only if the
get-state command is invoked with the 'detail' option.

This commit therefore also changes the get-state CLI usage. The
modified usage is as follows:

 # gluster get-state [] [[odir ] \
[file ]] [detail]

Change-Id: I42cd4ef160f9e96d55a08a10d32c8ba44e4cd3d8
BUG: 1431183
Signed-off-by: Samikshan Bairagya 
Reviewed-on: https://review.gluster.org/17003
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

core: run many bricks within one glusterfsd process

2017-01-31T00:13:58+00:00

This patch adds support for multiple brick translator stacks running
in a single brick server process.  This reduces our per-brick memory usage by
approximately 3x, and our appetite for TCP ports even more.  It also creates
potential to avoid process/thread thrashing, and to improve QoS by scheduling
more carefully across the bricks, but realizing that potential will require
further work.

Multiplexing is controlled by the "cluster.brick-multiplex" global option.  By
default it's off, and bricks are started in separate processes as before.  If
multiplexing is enabled, then *compatible* bricks (mostly those with the same
transport options) will be started in the same process.

Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb
BUG: 1385758
Signed-off-by: Jeff Darcy 
Reviewed-on: https://review.gluster.org/14763
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Vijay Bellur

gfapi: create statedump when glusterd requests it

2017-01-24T10:42:57+00:00

When GlusterD sends the STATEDUMP procedure to the libgfapi client, the
client checks if it matches the PID that should take the statedump. If
so, it will do a statedump for the glfs_t that is connected to this mgmt
connection.

BUG: 1169302
Change-Id: I70d6a1f4f19d525377aebc8fa57f51e513b92d84
See-also: http://review.gluster.org/9228
Signed-off-by: Poornima G 
[ndevos: separated patch from 9228]
Reviewed-on: https://review.gluster.org/16415
Reviewed-by: Niels de Vos 
Tested-by: Niels de Vos 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Prashanth Pai

glusterd: add a cli command to trigger a statedump on a client

2017-01-24T00:13:15+00:00

With this, we will be able to trigger statedumps on remote Gluster
clients, mainly targetted for applications using libgfapi.

Design:
SIGUSR signal is the most comman way of taking a statedump in Gluster.
But it cannot be used for libgfapi based processes, as the process
loading the library might have already consumed SIGUSR signal. Hence
going by the command way.

One has to issue a Gluster command to initiate a statedump on the
libgfapi based client. The command takes hostname and PID as an
argument. All the glusterds in the cluster, check if they are connected
to the specified hostname, and send an RPC request to all the connected
clients from that hostname (via the mgmt connection).

URL: http://review.gluster.org/16357
Change-Id: Icbe4d2f026b32a2c7d5535e1bfb2cdaaff042e91
BUG: 1169302
Signed-off-by: Poornima G 
[ndevos: minor fixes and split patch in smaller pieces]
Reviewed-on: https://review.gluster.org/9228
Reviewed-by: Niels de Vos 
Tested-by: Niels de Vos 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Kaleb KEITHLEY 
CentOS-regression: Gluster Build System 
Reviewed-by: Samikshan Bairagya

glusterd, cli: Get global options through volume get functionality

2016-12-31T04:47:27+00:00

Currently it is not possible to retrieve values of global options
by using the 'gluster volume get' functionality if there are no
volumes present. In order to get the global options one has to use
'gluster volume get' with a specific volume name. This usage makes
the illusion as though the option is set only on one volume, which
is incorrect. When setting the global options, 'gluster volume set'
provides a way to set them using the volume name as 'all'.

Similarly, retrieving the global options should be made possible by
using the volume name 'all' with the 'gluster volume get'
functionality. This patch adds that functionality to 'volume get'

Usage:
	# gluster volume get all

glusterd/cli: cli to get local state representation from glusterd

2016-08-26T15:23:37+00:00

Currently there is no existing CLI that can be used to get the
local state representation of the cluster as maintained in glusterd
in a readable as well as parseable format.

The CLI added has the following usage:

 # gluster get-state [daemon] [odir ] [file ]

This would dump data points that reflect the local state
representation of the cluster as maintained in glusterd (no other
daemons are supported as of now) to a file inside the specified
output directory. The default output directory and filename is
/var/run/gluster and glusterd_state_ respectively. The
option for specifying the daemon name leaves room to add support for
other daemons in the future. Following are the data points captured
as of now to represent the state from the local glusterd pov:

 * Peer:
    - Primary hostname
    - uuid
    - state
    - connection status
    - List of hostnames

 * Volumes:
    - name, id, transport type, status
    - counts: bricks, snap, subvol, stripe, arbiter, disperse,
 redundancy
    - snapd status
    - quorum status
    - tiering related information
    - rebalance status
    - replace bricks status
    - snapshots

 * Bricks:
    - Path, hostname (for all bricks these info will be shown)
    - port, rdma port, status, mount options, filesystem type and
signed in status for bricks running locally.

 * Services:
    - name, online status for initialised services

 * Others:
    - Base port, last allocated port
    - op-version
    - MYUUID

Change-Id: I4a45cc5407ab92d8afdbbd2098ece851f7e3d618
BUG: 1353156
Signed-off-by: Samikshan Bairagya 
Reviewed-on: http://review.gluster.org/14873
Reviewed-by: Avra Sengupta 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Atin Mukherjee

tests/cli: Generate SSL certificates

2016-08-22T04:03:43+00:00

Generate SSL certificates before enabling
management encryption to avoid test failure.

Change-Id: Iab23b36703f4653f1d5bb9d14695e4d3fa63ad61
Signed-off-by: Ashish Pandey 
BUG: 1368349
Signed-off-by: Ashish Pandey 
Reviewed-on: http://review.gluster.org/15202
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee