glusterfs.git/libglusterfs/src/logging.h, branch v3.8.8

quota/glusterd: enhance quota enable and disable process

2016-04-29T10:11:35+00:00

Previously quota crawl was done from the single mount point,
this is very slow process if there are huge number of files exists
in the volume

This RFE will now spawn crawl process for each brick in the
volume, and  files are looked in parallel independently for each
brick. This improves the speed of crawling process for
entire files-system

This patch also fixes below problem
* Previously, mountdir was created under '/tmp'.
  If someone tries to cleanup '/tmp'/ directory
  then it is very dangerous that we loose volume data
  So create a mount point under /var/run/gluster/tmp
  instead

* Previously, file-system crawl is performed from all the nodes,
  which is a redundant operation and performance will degrade
  The problem is fixed with this patch

Change-Id: Icabedeb44182139ace9c8106793803122388cab8
BUG: 1290766
Signed-off-by: vmallika 
Reviewed-on: http://review.gluster.org/12952
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Manikandan Selvaganesh 
Reviewed-by: Atin Mukherjee

gfapi: Fix the crashes caused by global_xlator and THIS

2016-03-23T05:47:31+00:00

Issue: http://thread.gmane.org/gmane.comp.file-systems.gluster.devel/10922

The right fix for this is elaborate and intrusive, until it is in place,
this patch provides a temperory fix. This fix is necessary, as without this
libgfapi applications like qemu, samba, NFS ganesha are prone to crashes.
This patch will be reverted completely, once the actual fix gets accepted.

Change-Id: Ic975ab0bb03ba415cdf9bddba1534ba4d2d2820c
BUG: 1319374
Signed-off-by: Poornima G 
Reviewed-on: http://review.gluster.org/13784
Smoke: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan 
Reviewed-by: Jeff Darcy 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

libglusterfs: close & open cmd_history.log on log rotate

2016-02-04T21:51:53+00:00

Post log rotate, cmd_history.log is not refreshed (closed & opened back)
due to which new commands still land up in the log rotated file.

Fix is to close and open cmd_history.log file upon log rotation

Change-Id: Ie6990c9d55b0afa544bc5c84de3db49ff4b1299b
BUG: 1286959
Signed-off-by: Gaurav Kumar Garg 
Reviewed-on: http://review.gluster.org/12832
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Niels de Vos 
NetBSD-regression: NetBSD Build System

build: do not #include "config.h" in each file

2015-05-29T12:43:17+00:00

Instead of including config.h in each file, and have the additional
config.h included from the compiler commandline (-include option).

When a .c file tests for a certain #define, and config.h was not
included, incorrect assumtions were made. With this change, it can not
happen again.

BUG: 1222319
Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/10808
Tested-by: Gluster Build System 
Tested-by: NetBSD Build System
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Pranith Kumar Karampuri

logging: Introduce suppression of repetitive log messages

2014-05-01T06:52:28+00:00

Change-Id: I8efa08cc9832ad509fba65a88bb0cddbaf056404
BUG: 1075611
Signed-off-by: Krutika Dhananjay 
Reviewed-on: http://review.gluster.org/7475
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

libglusterfs: Define macro GF_PRI_USEC for Linux as well

2014-04-27T06:02:03+00:00

Change-Id: I073f1f4ead4391d497fbb7603f9ee0257271493b
BUG: 1089172
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/7571
Reviewed-by: Harshavardhana 
Tested-by: Harshavardhana 
Reviewed-by: Anand Avati

build: MacOSX Porting fixes

2014-04-24T21:41:48+00:00

git@forge.gluster.org:~schafdog/glusterfs-core/osx-glusterfs

Working functionality on MacOSX

 - GlusterD (management daemon)
 - GlusterCLI (management cli)
 - GlusterFS FUSE (using OSXFUSE)
 - GlusterNFS (without NLM - issues with rpc.statd)

Change-Id: I20193d3f8904388e47344e523b3787dbeab044ac
BUG: 1089172
Signed-off-by: Harshavardhana 
Signed-off-by: Dennis Schafroth 
Tested-by: Harshavardhana 
Tested-by: Dennis Schafroth 
Reviewed-on: http://review.gluster.org/7503
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

logging: Make logger and log format configurable through cli

2014-04-12T01:00:54+00:00

Change-Id: Ic4b701a6621578848ff67ae4ecb5a10b5f32f93b
BUG: 1075611
Signed-off-by: Krutika Dhananjay 
Reviewed-on: http://review.gluster.org/7372
Tested-by: Gluster Build System 
Reviewed-by: Krishnan Parthasarathi 
Reviewed-by: Vijay Bellur

log: enhance gluster log format with message ID and standardize errno reporting

2014-03-28T11:53:37+00:00

	Currently there are quite a slew of logs in Gluster that do not
	lend themselves to trivial analysis by various tools that help
	collect	and monitor logs, due to the textual nature of the logs.

	This FEAT is to make this better by giving logs message IDs so
	that the tools do not have to do complex log parsing to break
	it down to problem areas and suggest troubleshooting options.

	With this patch, a new set of logging APIs are introduced that
	take additionally a message ID and an error number, so as to
	print the message ID and the descriptive string for the error.

	New APIs:
		- gf_msg, gf_msg_debug/trace, gf_msg_nomem, gf_msg_callingfn

	These APIs follow the functionality of the previous gf_log*
	counterparts, and hence are 1:1 replacements, with the delta
	that, gf_msg, gf_msg_callingfn take additional parameters as
	specified above.

	Defining the log messages:
	Each invocation of gf_msg/gf_msg_callingfn, should provide an ID
	and an errnum (if available). Towards this, a common message id
	file is provided, which contains defines to various messages and
	their respective strings. As other messages are changed to the
	new infrastructure APIs, it is intended that this file is edited
	to add these messages as well.

	Framework enhanced:
	The logging framework is also enhanced to be able to support
	different logging backends in the future. Hence new configuration
	options for logging framework and logging formats are introduced.

	Backward compatibility:
	Currently the framework supports logging in the traditional
	format, with the inclusion of an error string based on the errnum
	passed in. Hence the shift to these new APIs would retain the log
	file names, locations, and format with the exception of an
	additional error string where applicable.

	Testing done:
	Tested the new APIs with different messages in normal code paths
	Tested with configurations set to gluster logs (syslog pending)
	Tested nomem variants, inducing the message in normal code paths
	Tested ident generation for normal code paths (other paths
		pending)
	Tested with sample gfapi program for gfapi messages
	Test code is stripped from the commit

	Pending work (not to be addressed in this patch (future)):
	- Logging framework should be configurable
	- Logging format should be configurable
	- Once all messages move to the new APIs deprecate/delete older
	  APIs to prevent misuse/abuse using the same
	- Repeated log messages should be suppressed (as a configurable
	  option)
	- Logging framework assumes that only one init is possible, but
	  there is no protection around the same (in existing code)
	- gf_log_fini is not invoked anywhere and does very little
	  cleanup (in existing code)
	- DOxygen comments to message id headers for each message

Change-Id: Ia043fda99a1c6cf7817517ef9e279bfcf35dcc24
BUG: 1075611
Signed-off-by: ShyamsundarR 
Reviewed-on: http://review.gluster.org/6547
Reviewed-by: Krutika Dhananjay 
Tested-by: Gluster Build System 
Reviewed-by: Raghavendra G 
Reviewed-by: Pranith Kumar Karampuri 
Reviewed-by: Vijay Bellur

gfapi: Closed the logfile fd and initialize to NULL in glfs_fini

2013-12-26T11:16:30+00:00

Currently if logfile is closed and other threads call gf_log
after glfs_fini() is executed, it may lead to memory corruption.
Adding gf_log_fini() which closes the logfile and initializes
the logfile to NULL, thus any further logging happens to stderr.
Also added gf_log_globals_fini() which should be filled in the
future to release all the logging resources.

Change-Id: I879163e1a3636e65300d166f782517ee773cab65
BUG: 1030228
Signed-off-by: Poornima G 
Reviewed-on: http://review.gluster.org/6552
Reviewed-by: Pranith Kumar Karampuri 
Reviewed-by: Shyamsundar Ranganathan 
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur