glusterfs.git/libglusterfs/src/inode.h, branch v3.5.6

features/quota: Improvements to quota

2013-11-26T18:24:02+00:00

* Two stages of quota enforcement is done:

  Soft and hard quota Upon reaching soft quota limit on the directory
  it logs/alerts in the quota daemon log (ie DEFAULT_LOG_DIR/quotad.log)
  and no more writes allowed after hard
  quota limit. After reaching the soft-limit the daemon alerts the
  user/admin repeatively for every 'alert-time', which is
  configurable.

* Quota enforcer is moved to server-side.

  It  takes care of enforcing quota. Since enforcer doesn't have the
  cluster view, it relies on another service called
  quota-aggregator. Aggregator, on query can return the size of a
  directory based on the cluster view.

  Enforcer is always loaded in the server graph and is by passed if
  the feature is not enabled.

  Options specific to enforcer:

  server-quota - Specifies whether the feature is on/off. It is used
  to by pass the quota if turned off.

  deem-statfs - If set to on, it takes quota limits into consideration
  while estimating fs size. (df command). The algorithm followed is,
  i.   Adjust statvfs based on limit configured on root.
  ii.  If limit is set on the inode passed, use size/limits on that inode to
       populate statvfs. Otherwise, use size/limits configured on root.
  iii. Upon statvfs, update the ctx->size on the inode.
  iv.  Don't let DHT aggregate, instead take the maximum of the usages from the
       subvols of the DHT, since each of it contains the complete information.

  Enforcer also makes use of gfid-to-path conversion functionality to
  work correctly when a client like nfs predominently relies on
  nameless lookups.

* Quota Aggregator acts as a thin client to provide cluster view

  Its a lightweight *gluster client* process with no mount point,
  started upon enabling quota or restarting the volume. This is a
  single process run on each brick, which can answer queries on all
  volumes in the cluster. Its volfile stored in
  GLUSTERD_DEFAULT_WORKING_DIR/quotad/quotad.vol.

Credits:
Raghavendra Bhat        
Varun Shastry           
Shishir Gowda           
Kruthika Dhananjay      
Brian Foster            
Krishnan Parthasarathi  

Change-Id: Id1cb25b414951da34c665a55f77385d482e0f9de
BUG: 969461
Signed-off-by: Raghavendra G 
Reviewed-on: http://review.gluster.org/5952
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

libglusterfs/inode: introduce new APIs for ctx handling

2013-11-13T19:43:48+00:00

* inode_ctx_reset{0,1,2}() for reseting value1, value2, and both respectively
* inode_ctx_get0() - to get the first value only
* inode_ctx_set0() - to set the first value only
* inode_ctx_get1() - to get the second value only
* inode_ctx_set1() - to set the second value only

Change-Id: I4dfbdac81d6a3f4e5784e060c76edabb1692ce03
Signed-off-by: Amar Tumballi 
Reviewed-on: http://review.gluster.org/5890
Reviewed-by: Anand Avati 
Tested-by: Anand Avati

core: changes to support gfid-access

2013-08-21T19:13:16+00:00

Change-Id: I38d2fdc47e4b805deafca6805e54807976ffdb7e
Signed-off-by: Amar Tumballi 
BUG: 952029
Reviewed-on: http://review.gluster.org/5496
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

Revert "fuse: auxiliary gfid mount support"

2013-08-21T19:12:07+00:00

This reverts commit 4c0f4c8a89039b1fa1c9c015fb6f273268164c20.

Conflicts:
	xlators/mount/fuse/src/fuse-bridge.c

For build issues added CREATE_MODE_KEY definition in:
        libglusterfs/src/glusterfs.h

Change-Id: I8093c2a0b5349b01e1ee6206025edbdbee43055e
BUG: 952029
Signed-off-by: Amar Tumballi 
Reviewed-on: http://review.gluster.org/5495
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

fuse: auxiliary gfid mount support

2013-07-19T08:14:08+00:00

* files can be accessed directly through their gfid and not just
  through their paths. For eg., if the gfid of a file is
  f3142503-c75e-45b1-b92a-463cf4c01f99, that file can be accessed
  using /.gfid/f3142503-c75e-45b1-b92a-463cf4c01f99

  .gfid is a virtual directory used to seperate out the namespace
  for accessing files through gfid. This way, we do not conflict with
  filenames which can be qualified as uuids.

* A new file/directory/symlink can be created with a pre-specified
  gfid. A setxattr done on parent directory with fuse_auxgfid_newfile_args_t
  initialized with appropriate fields as value to key "glusterfs.gfid.newfile"
  results in the entry /bname whose gfid is set to args.gfid. The
  contents of the structure should be in network byte order.

  struct auxfuse_symlink_in {
        char     linkpath[]; /* linkpath is a null terminated string */
  } __attribute__ ((__packed__));

  struct auxfuse_mknod_in {
        unsigned int   mode;
        unsigned int   rdev;
        unsigned int   umask;
  } __attribute__ ((__packed__));

  struct auxfuse_mkdir_in {
        unsigned int   mode;
        unsigned int   umask;
  } __attribute__ ((__packed__));

  typedef struct {
        unsigned int  uid;
        unsigned int  gid;
        char          gfid[UUID_CANONICAL_FORM_LEN + 1]; /* a null terminated gfid string
                                                      * in canonical form.
                                                      */
        unsigned int  st_mode;
        char          bname[];     /* bname is a null terminated string */

        union {
                struct auxfuse_mkdir_in   mkdir;
                struct auxfuse_mknod_in   mknod;
                struct auxfuse_symlink_in symlink;
        } __attribute__ ((__packed__)) args;
  } __attribute__ ((__packed__)) fuse_auxgfid_newfile_args_t;

  An initial consumer of this feature would be geo-replication to
  create files on slave mount with same gfids as that on master.
  It will also help gsyncd to access files directly through their
  gfids. gsyncd in its newer version will be consuming a changelog
  (of master) containing operations on gfids and sync corresponding
  files to slave.

* Also, bring in support to heal gfids with a specific value.
  fuse-bridge sends across a gfid during a lookup, which storage
  translators assign to an inode (file/directory etc) if there is
  no gfid associated it. This patch brings in support
  to specify that gfid value from an application, instead of relying
  on random gfid generated by fuse-bridge.

  gfids can be healed through setxattr interface. setxattr should be
  done on parent directory. The key used is "glusterfs.gfid.heal"
  and the value should be the following structure whose contents
  should be in network byte order.

  typedef struct {
        char      gfid[UUID_CANONICAL_FORM_LEN + 1]; /* a null terminated gfid
                                                      * string in canonical form
                                                      */
        char      bname[]; /* a null terminated basename */
  } __attribute__((__packed__)) fuse_auxgfid_heal_args_t;

  This feature can be used for upgrading older geo-rep setups where gfids
  of files are different on master and slave to newer setups where they
  should be same. One can delete gfids on slave using setxattr -x and
  .glusterfs and issue stat on all the files with gfids from master.

Thanks to "Amar Tumballi"  and "Csaba Henk"
 for their inputs.

Signed-off-by: Raghavendra G 
Change-Id: Ie8ddc0fb3732732315c7ec49eab850c16d905e4e
BUG: 952029
Reviewed-on: http://review.gluster.com/#/c/4702
Reviewed-by: Amar Tumballi 
Tested-by: Amar Tumballi 
Reviewed-on: http://review.gluster.org/4702
Reviewed-by: Xavier Hernandez 
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

libglusterfs: Maintain open-fd-count in inode.

2013-02-06T17:48:23+00:00

Change-Id: I643d02959f92e40f68a53baf165753ed20f8b3e0
BUG: 908146
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/4468
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

fuse/md-cache: add support for the 'fopen-keep-cache' mount option

2012-07-13T16:46:09+00:00

fopen-keep-cache disables unconditional page-cache invalidations
on file open in fuse (via FOPEN_KEEP_CACHE) and replaces that
behavior with detection of remote changes and explicit
invalidations from mount/fuse. This option improves local caching
through the page cache and native client.

This change defines a new 'invalidate' translator callback to
identify when an inode's cache mapping has been determined to be
invalid. md-cache implements the policy to detect and invoke
inode invalidations. fuse-bridge and io-cache implement
invalidate handlers to invalidate the respective caches (page
cache in the case of fuse).

BUG: 833564
Change-Id: I99818da5777eaf06276c1c0b194669f5bab92d48
Signed-off-by: Brian Foster 
Reviewed-on: http://review.gluster.com/3584
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

license: dual license under GPLV2 and LGPLV3+

2012-05-11T05:06:16+00:00

Note that the license was not changed in any of the following:
	.../argp-standalone/...
        .../booster/...
        .../cli/...
        .../contrib/...
        .../extras/...
        .../glusterfsd/...
        .../glusterfs-hadoop/...
        .../mod_clusterfs/...
        .../scheduler/...
        .../swift/...

The license was not changed in any of the non-building xlators. The
license was not changed in any of the xlators that seemed — to me — to
be clearly server-side only, e.g. protocol/server

Note too that copyright was changed along with the license; I did
not change the copyright in files where the license did not change.

If you find any errors or ommissions please don't hesitate to let me know.

The complete list of files with the license change is:
	libglusterfs/src/byte-order.h
	libglusterfs/src/call-stub.c
	libglusterfs/src/call-stub.h
	libglusterfs/src/checksum.c
	libglusterfs/src/checksum.h
	libglusterfs/src/circ-buff.c
	libglusterfs/src/circ-buff.h
	libglusterfs/src/common-utils.c
	libglusterfs/src/common-utils.h
	libglusterfs/src/compat-errno.c
	libglusterfs/src/compat-errno.h
	libglusterfs/src/compat.c
	libglusterfs/src/compat.h
	libglusterfs/src/daemon.c
	libglusterfs/src/daemon.h
	libglusterfs/src/defaults.c
	libglusterfs/src/defaults.h
	libglusterfs/src/dict.c
	libglusterfs/src/dict.h
	libglusterfs/src/event-history.c
	libglusterfs/src/event-history.h
	libglusterfs/src/event.c
	libglusterfs/src/event.h
	libglusterfs/src/fd-lk.c
	libglusterfs/src/fd-lk.h
	libglusterfs/src/fd.c
	libglusterfs/src/fd.h
	libglusterfs/src/gf-dirent.c
	libglusterfs/src/gf-dirent.h
	libglusterfs/src/globals.c
	libglusterfs/src/globals.h
	libglusterfs/src/glusterfs.h
	libglusterfs/src/graph-print.c
	libglusterfs/src/graph-utils.h
	libglusterfs/src/graph.c
	libglusterfs/src/hashfn.c
	libglusterfs/src/hashfn.h
	libglusterfs/src/iatt.h
	libglusterfs/src/inode.c
	libglusterfs/src/inode.h
	libglusterfs/src/iobuf.c
	libglusterfs/src/iobuf.h
	libglusterfs/src/latency.c
	libglusterfs/src/latency.h
	libglusterfs/src/list.h
	libglusterfs/src/lkowner.h
	libglusterfs/src/locking.h
	libglusterfs/src/logging.c
	libglusterfs/src/logging.h
	libglusterfs/src/mem-pool.c
	libglusterfs/src/mem-pool.h
	libglusterfs/src/mem-types.h
	libglusterfs/src/options.c
	libglusterfs/src/options.h
	libglusterfs/src/rbthash.c
	libglusterfs/src/rbthash.h
	libglusterfs/src/run.c
	libglusterfs/src/run.h
	libglusterfs/src/scheduler.c
	libglusterfs/src/scheduler.h
	libglusterfs/src/stack.c
	libglusterfs/src/stack.h
	libglusterfs/src/statedump.c
	libglusterfs/src/statedump.h
	libglusterfs/src/syncop.c
	libglusterfs/src/syncop.h
	libglusterfs/src/syscall.c
	libglusterfs/src/syscall.h
	libglusterfs/src/timer.c
	libglusterfs/src/timer.h
	libglusterfs/src/trie.c
	libglusterfs/src/trie.h
	libglusterfs/src/xlator.c
	libglusterfs/src/xlator.h
	libglusterfsclient/src/libglusterfsclient-dentry.c
	libglusterfsclient/src/libglusterfsclient-internals.h
	libglusterfsclient/src/libglusterfsclient.c
	libglusterfsclient/src/libglusterfsclient.h
	rpc/rpc-lib/src/auth-glusterfs.c
	rpc/rpc-lib/src/auth-null.c
	rpc/rpc-lib/src/auth-unix.c
	rpc/rpc-lib/src/protocol-common.h
	rpc/rpc-lib/src/rpc-clnt.c
	rpc/rpc-lib/src/rpc-clnt.h
	rpc/rpc-lib/src/rpc-transport.c
	rpc/rpc-lib/src/rpc-transport.h
	rpc/rpc-lib/src/rpcsvc-auth.c
	rpc/rpc-lib/src/rpcsvc-common.h
	rpc/rpc-lib/src/rpcsvc.c
	rpc/rpc-lib/src/rpcsvc.h
	rpc/rpc-lib/src/xdr-common.h
	rpc/rpc-lib/src/xdr-rpc.c
	rpc/rpc-lib/src/xdr-rpc.h
	rpc/rpc-lib/src/xdr-rpcclnt.c
	rpc/rpc-lib/src/xdr-rpcclnt.h
	rpc/rpc-transport/rdma/src/name.c
	rpc/rpc-transport/rdma/src/name.h
	rpc/rpc-transport/rdma/src/rdma.c
	rpc/rpc-transport/rdma/src/rdma.h
	rpc/rpc-transport/socket/src/name.c
	rpc/rpc-transport/socket/src/name.h
	rpc/rpc-transport/socket/src/socket.c
	rpc/rpc-transport/socket/src/socket.h
	xlators/cluster/afr/src/afr-common.c
	xlators/cluster/afr/src/afr-dir-read.c
	xlators/cluster/afr/src/afr-dir-read.h
	xlators/cluster/afr/src/afr-dir-write.c
	xlators/cluster/afr/src/afr-dir-write.h
	xlators/cluster/afr/src/afr-inode-read.c
	xlators/cluster/afr/src/afr-inode-read.h
	xlators/cluster/afr/src/afr-inode-write.c
	xlators/cluster/afr/src/afr-inode-write.h
	xlators/cluster/afr/src/afr-lk-common.c
	xlators/cluster/afr/src/afr-mem-types.h
	xlators/cluster/afr/src/afr-open.c
	xlators/cluster/afr/src/afr-self-heal-algorithm.c
	xlators/cluster/afr/src/afr-self-heal-algorithm.h
	xlators/cluster/afr/src/afr-self-heal-common.c
	xlators/cluster/afr/src/afr-self-heal-common.h
	xlators/cluster/afr/src/afr-self-heal-data.c
	xlators/cluster/afr/src/afr-self-heal-entry.c
	xlators/cluster/afr/src/afr-self-heal-metadata.c
	xlators/cluster/afr/src/afr-self-heal.h
	xlators/cluster/afr/src/afr-self-heald.c
	xlators/cluster/afr/src/afr-self-heald.h
	xlators/cluster/afr/src/afr-transaction.c
	xlators/cluster/afr/src/afr-transaction.h
	xlators/cluster/afr/src/afr.c
	xlators/cluster/afr/src/afr.h
	xlators/cluster/afr/src/pump.c
	xlators/cluster/afr/src/pump.h
	xlators/cluster/dht/src/dht-common.c
	xlators/cluster/dht/src/dht-common.h
	xlators/cluster/dht/src/dht-diskusage.c
	xlators/cluster/dht/src/dht-hashfn.c
	xlators/cluster/dht/src/dht-helper.c
	xlators/cluster/dht/src/dht-inode-read.c
	xlators/cluster/dht/src/dht-inode-write.c
	xlators/cluster/dht/src/dht-layout.c
	xlators/cluster/dht/src/dht-linkfile.c
	xlators/cluster/dht/src/dht-mem-types.h
	xlators/cluster/dht/src/dht-rebalance.c
	xlators/cluster/dht/src/dht-rename.c
	xlators/cluster/dht/src/dht-selfheal.c
	xlators/cluster/dht/src/dht.c
	xlators/cluster/dht/src/nufa.c
	xlators/cluster/dht/src/switch.c
	xlators/cluster/stripe/src/stripe-helpers.c
	xlators/cluster/stripe/src/stripe-mem-types.h
	xlators/cluster/stripe/src/stripe.c
	xlators/cluster/stripe/src/stripe.h
	xlators/features/index/src/index-mem-types.h ¹
	xlators/features/index/src/index.c ¹
	xlators/features/index/src/index.h ¹
	xlators/performance/io-cache/src/io-cache.c
	xlators/performance/io-cache/src/io-cache.h
	xlators/performance/io-cache/src/ioc-inode.c
	xlators/performance/io-cache/src/ioc-mem-types.h
	xlators/performance/io-cache/src/page.c
	xlators/performance/io-threads/src/io-threads.c
	xlators/performance/io-threads/src/io-threads.h
	xlators/performance/io-threads/src/iot-mem-types.h
	xlators/performance/md-cache/src/md-cache-mem-types.h
	xlators/performance/md-cache/src/md-cache.c
	xlators/performance/quick-read/src/quick-read-mem-types.h
	xlators/performance/quick-read/src/quick-read.c
	xlators/performance/quick-read/src/quick-read.h
	xlators/performance/read-ahead/src/page.c
	xlators/performance/read-ahead/src/read-ahead-mem-types.h
	xlators/performance/read-ahead/src/read-ahead.c
	xlators/performance/read-ahead/src/read-ahead.h
	xlators/performance/symlink-cache/src/symlink-cache.c
	xlators/performance/write-behind/src/write-behind-mem-types.h
	xlators/performance/write-behind/src/write-behind.c
	xlators/protocol/auth/addr/src/addr.c ¹
	xlators/protocol/auth/login/src/login.c ¹
	xlators/protocol/client/src/client-callback.c
	xlators/protocol/client/src/client-handshake.c
	xlators/protocol/client/src/client-helpers.c
	xlators/protocol/client/src/client-lk.c
	xlators/protocol/client/src/client-mem-types.h
	xlators/protocol/client/src/client.c
	xlators/protocol/client/src/client.h
	xlators/protocol/client/src/client3_1-fops.c

¹ Copyright only, license reverted to original

Change-Id: If560e826c61b6b26f8b9af7bed6e4bcbaeba31a8
BUG: 820551
Signed-off-by: Kaleb KEITHLEY 
Reviewed-on: http://review.gluster.com/3304
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

Resolve: Assign correct path while resolving

2012-05-08T20:39:01+00:00

Change-Id: Ia17ff38a60225dd2e9115aaa298bed42f9e43f56
BUG: 812277
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.com/3248
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

libglusterfs/inode.c: add inode_resolve

2012-04-24T07:06:39+00:00

inode_resolve takes an itable and path as arguments and returns either
NULL or the inode corresponding to the path

Change-Id: Id42d62cce6b04dbfec7d606120b09a1e54ab484e
BUG: 802905
Signed-off-by: Raghavendra G 
Reviewed-on: http://review.gluster.com/3021
Tested-by: Gluster Build System 
Reviewed-by: Raghavendra Bhat 
Reviewed-by: Mohammed Junaid 
Reviewed-by: Anand Avati