glusterfs.git/libglusterfs/src/common-utils.h, branch v3.3.0qa35

glusterd/rebalance: Start process with xlator option client-pid -3

2012-04-16T18:21:50+00:00

This would prevent updation of xtime by the marker.

Signed-off-by: shishir gowda 
Change-Id: I11e287511026326271c2926e55993e48b32018f6
BUG: 812287
Reviewed-on: http://review.gluster.com/3144
Tested-by: Gluster Build System 
Reviewed-by: Mohammed Junaid 
Reviewed-by: Csaba Henk 
Reviewed-by: Vijay Bellur

Replace GPLV3 MD5 with OpenSSL MD5

2012-04-04T23:13:21+00:00

Ric asked me to look at replacing the GPL licensed MD5 code with
something better, i.e. perhaps faster, and with a less restrictive
license, etc. So I took a couple hour holiday from working on
wrapping up the client_t and did this.

OpenSSL (nee SSLeay) is released under the OpenSSL license, a BSD/MIT
style license. OpenSSL (libcrypto.so) is used on Linux, OS X and *BSD,
Open Solaris, etc. IOW it's universally available on the platforms we
care about. It's written by Eric Young (eay), now at EMC/RSA, and I
can say from experience that the OpenSSL implementation of MD5 (at least)
is every bit as fast as RSA's proprietary implementation (primarily
because the implementations are very, very similar.) The last time I
surveyed MD5 implementations I found they're all pretty much the same
speed.

I changed the APIs (and ABIs) for the strong and weak checksums.
Strictly speaking I didn't need to do that. They're only called on
short strings of data, i.e. pathnames, so using int32_t and uint32_t
is ostensibly okay. My change is arguably a better, more general API
for this sort of thing. It's also what bit me when gerrit/jenkins
validation failed due to glusterfs segv-ing. (I didn't pay close enough
attention to the implementation of the weak checksum. But it forced me
to learn what gerrit/jenkins are doing and going forward I can do better
testing before submitting to gerrit.)

Now resubmitting with a BZ

Change-Id: I545fade1604e74fc68399894550229bd57a5e0df
BUG: 807718
Signed-off-by: Kaleb KEITHLEY 
Reviewed-on: http://review.gluster.com/3019
Tested-by: Gluster Build System 
Reviewed-by: Jeff Darcy

glusterd: Include port in nfs status

2012-04-02T09:41:18+00:00

Change-Id: I679e491e801b694e8a0f93dd87cf540441dae927
BUG: 806877
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.com/3060
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

mgmt/glusterd : volume set validation fixes

2012-03-18T07:52:40+00:00

This is the new version of the patch by Kaushik at review.gluster.com/699

The following new option types have been introduced:
 * GF_OPTION_TYPE_INTERNET_ADDRESS_LIST
 * GF_OPTION_TYPE_PRIORITY_LIST
 * GF_OPTION_TYPE_SIZE_LIST
and option types of several options in translators have been updated to use the
new types.

valid_internet_address(), valid_ipv4_address() & valid_ipv6_address() functions
has been updated for * wildcard matching. Previously used standalone wildcard
address checking functions have been removed.

Changes have been done to stripe translator to correctly set, update and use
stripe-blocksize. Also minimum value for block-size has been set to 16KB.

Change-Id: I2aa484ff695f6a915a8fc9a9f965cf0344f41d59
BUG: 765248
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.com/2899
Tested-by: Gluster Build System 
Reviewed-by: Shishir Gowda 
Reviewed-by: Anand Avati

fops/removexattr: prevent users from removing glusterfs xattrs

2012-03-05T17:17:47+00:00

* Each xlator prevents the user from removing xlator-specific
  xattrs like trusted.gfid by handling it in respective removexattr
  functions.

* For xlators which did not define remove and fremovexattr,
  the functions have been implemented with appropriate checks.

xlator         |     fops-added
_______________|__________________________
               |
1. stripe      |     removexattr and fremovexattr
2. quota       |     removexattr and fremovexattr

Change-Id: I98e22109717978134378bc75b2eca83fefb2abba
BUG: 783525
Signed-off-by: Rajesh Amaravathi 
Reviewed-on: http://review.gluster.com/2836
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi 
Reviewed-by: Jeff Darcy

libglusterfs/options: Cleanup xlator percent_sizet code.

2012-02-22T06:23:09+00:00

Change-Id: I1a39252d6c26f7e30b77ef682b8b3cdcde8a4a51
BUG: 769691
Signed-off-by: Harshavardhana 
Reviewed-on: http://review.gluster.com/2619
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi

cli, protocol/server : improve validation for the option auth.(allow/reject)

2012-02-06T06:19:54+00:00

cli now checks validity of address list given for 'volume set auth.*'

Server xlator checks addresses supplied to auth.(allow/reject) option
including wildcards for correctness in case volfile is manually edited.

Original patch done by shylesh@gluster.com
Original patch  is at http://patches.gluster.com/patch/7566/

Change-Id: Icf52d6eeef64d6632b15aa90a379fadacdf74fef
BUG: 764197
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.com/306
Tested-by: Gluster Build System 
Reviewed-by: Jeff Darcy 
Reviewed-by: Vijay Bellur

features/marker,quota: Incorporate changes to support nameless lookup

2012-02-03T03:33:11+00:00

Change-Id: Ic5f00a9891bd835ebee5a3e103ef0f75d0b7fc25
BUG: 783925
Signed-off-by: Raghavendra Bhat 
Reviewed-on: http://review.gluster.com/2702
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi 
Reviewed-by: Jeff Darcy

core: change lk-owner as a 1k buffer

2012-01-25T04:14:17+00:00

so, NLM can send the lk-owner field directly to the locks translators,
while doing the same effort, also enabled sending maximum of 500 aux gid
over protocol.

Change-Id: I87c2514392748416f7ffe21d5154faad2e413969
Signed-off-by: Amar Tumballi 
BUG: 767229
Reviewed-on: http://review.gluster.com/779
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

core/setxattr: prevent users from setting glusterfs xattrs

2012-01-14T12:57:59+00:00

* Each xlator prevents the user from setting glusterfs-internal
xattrs like trusted.gfid by handling it in respective setxattr
functions. The speacial case of trusted.gfid is handled in
fuse (Not in posix because posix_setxattr is used to set gfid).

* For xlators which did not define setxattr and/or fsetxattr,
the functions have been implemented with appropriate checks.

xlator         |     fops-added
_______________|__________________________
               |
1. afr         |     fsetxattr
2. stripe      |     setxatrr and fsetxattr
3. quota       |     setxattr and fsetxattr

Change-Id: Ib62abb7067415b23a708002f884d30e8866fbf48
BUG: 765487
Signed-off-by: Rajesh Amaravathi 
Reviewed-on: http://review.gluster.com/685
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi