glusterfs.git/libglusterfs/src/common-utils.h, branch v3.3.0qa29

mgmt/glusterd : volume set validation fixes

2012-03-18T07:52:40+00:00

This is the new version of the patch by Kaushik at review.gluster.com/699

The following new option types have been introduced:
 * GF_OPTION_TYPE_INTERNET_ADDRESS_LIST
 * GF_OPTION_TYPE_PRIORITY_LIST
 * GF_OPTION_TYPE_SIZE_LIST
and option types of several options in translators have been updated to use the
new types.

valid_internet_address(), valid_ipv4_address() & valid_ipv6_address() functions
has been updated for * wildcard matching. Previously used standalone wildcard
address checking functions have been removed.

Changes have been done to stripe translator to correctly set, update and use
stripe-blocksize. Also minimum value for block-size has been set to 16KB.

Change-Id: I2aa484ff695f6a915a8fc9a9f965cf0344f41d59
BUG: 765248
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.com/2899
Tested-by: Gluster Build System 
Reviewed-by: Shishir Gowda 
Reviewed-by: Anand Avati

fops/removexattr: prevent users from removing glusterfs xattrs

2012-03-05T17:17:47+00:00

* Each xlator prevents the user from removing xlator-specific
  xattrs like trusted.gfid by handling it in respective removexattr
  functions.

* For xlators which did not define remove and fremovexattr,
  the functions have been implemented with appropriate checks.

xlator         |     fops-added
_______________|__________________________
               |
1. stripe      |     removexattr and fremovexattr
2. quota       |     removexattr and fremovexattr

Change-Id: I98e22109717978134378bc75b2eca83fefb2abba
BUG: 783525
Signed-off-by: Rajesh Amaravathi 
Reviewed-on: http://review.gluster.com/2836
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi 
Reviewed-by: Jeff Darcy

libglusterfs/options: Cleanup xlator percent_sizet code.

2012-02-22T06:23:09+00:00

Change-Id: I1a39252d6c26f7e30b77ef682b8b3cdcde8a4a51
BUG: 769691
Signed-off-by: Harshavardhana 
Reviewed-on: http://review.gluster.com/2619
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi

cli, protocol/server : improve validation for the option auth.(allow/reject)

2012-02-06T06:19:54+00:00

cli now checks validity of address list given for 'volume set auth.*'

Server xlator checks addresses supplied to auth.(allow/reject) option
including wildcards for correctness in case volfile is manually edited.

Original patch done by shylesh@gluster.com
Original patch  is at http://patches.gluster.com/patch/7566/

Change-Id: Icf52d6eeef64d6632b15aa90a379fadacdf74fef
BUG: 764197
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.com/306
Tested-by: Gluster Build System 
Reviewed-by: Jeff Darcy 
Reviewed-by: Vijay Bellur

features/marker,quota: Incorporate changes to support nameless lookup

2012-02-03T03:33:11+00:00

Change-Id: Ic5f00a9891bd835ebee5a3e103ef0f75d0b7fc25
BUG: 783925
Signed-off-by: Raghavendra Bhat 
Reviewed-on: http://review.gluster.com/2702
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi 
Reviewed-by: Jeff Darcy

core: change lk-owner as a 1k buffer

2012-01-25T04:14:17+00:00

so, NLM can send the lk-owner field directly to the locks translators,
while doing the same effort, also enabled sending maximum of 500 aux gid
over protocol.

Change-Id: I87c2514392748416f7ffe21d5154faad2e413969
Signed-off-by: Amar Tumballi 
BUG: 767229
Reviewed-on: http://review.gluster.com/779
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

core/setxattr: prevent users from setting glusterfs xattrs

2012-01-14T12:57:59+00:00

* Each xlator prevents the user from setting glusterfs-internal
xattrs like trusted.gfid by handling it in respective setxattr
functions. The speacial case of trusted.gfid is handled in
fuse (Not in posix because posix_setxattr is used to set gfid).

* For xlators which did not define setxattr and/or fsetxattr,
the functions have been implemented with appropriate checks.

xlator         |     fops-added
_______________|__________________________
               |
1. afr         |     fsetxattr
2. stripe      |     setxatrr and fsetxattr
3. quota       |     setxattr and fsetxattr

Change-Id: Ib62abb7067415b23a708002f884d30e8866fbf48
BUG: 765487
Signed-off-by: Rajesh Amaravathi 
Reviewed-on: http://review.gluster.com/685
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi

cli: volume status enhancement

2012-01-12T09:58:26+00:00

    * Support "gluster volume status (all)" option to display all
      volumes' status.

    * On option "detail" appended to "gluster volume status *",
      amount of storage free, total storage, and backend filesystem
      details like inode size, inode count, free inodes, fs type,
      device name of each brick is displayed.

    * One can also obtain [detailed]status of only one brick.

    * Format of the enhanced volume status command is:
      "gluster volume status [all|] [] [detail]"

    * Some generic functions have been added to common-utils:

           skipword
           get_nth_word
      These functions enable parsing and fetching
      of words in a sentence.

           glusterd_get_brick_root    (in glusterd)
      These are self explanatory.

Change-Id: I6f40c1e19810f8504cd3b1786207364053d82e28
BUG: 765464
Signed-off-by: Rajesh Amaravathi 
Reviewed-on: http://review.gluster.com/777
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi

lib/mount-broker: move utility functions to common-utils

2012-01-05T16:51:22+00:00

functions skipwhite and nwstrtail have been moved from
mount-broker to common-utils library for general use.

Change-Id: I9cfefb28bbfcf5d0bd37e35865ff3f3b7923fc53
BUG: 765464
Signed-off-by: Rajesh Amaravathi 
Reviewed-on: http://review.gluster.com/2560
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur 
Reviewed-by: Csaba Henk

protocol/client: Be strict about gfids in fop req

2011-12-15T10:50:00+00:00

Change-Id: I7508ab3a93329bb6a679801fddfcd0e5b0c7c134
BUG: 765198
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.com/770
Tested-by: Gluster Build System 
Reviewed-by: Jeff Darcy 
Reviewed-by: Vijay Bellur