glusterfs.git/glusterfsd, branch v3.11.0

glusterfsd: process attach and detach request inside lock

2017-05-29T13:56:08+00:00

With brick multiplexing, there is a high possibility that attach and
detach requests might be parallely processed and to avoid a concurrent
update to the same graph list, a mutex lock is required.

Please note this backport defines the volfile_lock mutex which was done
as part of a different patch https://review.gluster.org/15036 in
mainline but is not available in release-3.11 branch.

Credits : Rafi (rkavunga@redhat.com) for the RCA of this issue

>Reviewed-on: https://review.gluster.org/17374
>Smoke: Gluster Build System 
>NetBSD-regression: NetBSD Build System 
>CentOS-regression: Gluster Build System 
>Reviewed-by: Jeff Darcy 
>(cherry picked from commit 3ca5ae2f3bff2371042b607b8e8a218bf316b48c)

Change-Id: Ic8e6d1708655c8a143c5a3690968dfa572a32a9c
BUG: 1455907
Signed-off-by: Atin Mukherjee 
Reviewed-on: https://review.gluster.org/17402
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan

glusterfsd: send PARENT_UP on brick attach

2017-05-16T00:32:25+00:00

With brick multiplexing being enabled, if a brick is instance attached to a
process then a PARENT_UP event is needed so that it reaches right till
posix layer and then from posix CHILD_UP event is sent back to all the
children.

>Reviewed-on: https://review.gluster.org/17225
>NetBSD-regression: NetBSD Build System 
>Smoke: Gluster Build System 
>CentOS-regression: Gluster Build System 
>Reviewed-by: Jeff Darcy 
>(cherry picked from commit 86ad032949cb80b6ba3df9dc8268243529d4eb84)

Change-Id: Ic341086adb3bbbde0342af518e1b273dd2f669b9
BUG: 1450729
Signed-off-by: Atin Mukherjee 
Reviewed-on: https://review.gluster.org/17289
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan

core: make the per glusterfs_ctx_t timer-wheel refcounted

2017-05-12T13:32:32+00:00

xlators can use a 'global' timer-wheel for scheduling events. This
timer-wheel is managed per glusterfs_ctx_t, but does not need to be
allocated for every graph. When an xlator wants to use the timer-wheel,
it will be instanciated on demand, and provided to xlators that request
it later on.

By adding a reference counter to the glusterfs_ctx_t for the
timer-wheel, the threads and structures can be cleaned up when the last
xlator does not have a need for it anymore. In general, the xlators
request the timer-wheel in init(), and they should return it in fini().

Because the timer-wheel is managed per glusterfs_ctx_t, the functions
can be added to ctx.c and do not need to live in their very minimal
tw.[ch] files.


>Reported-by: Poornima G 
>Signed-off-by: Niels de Vos 
>Reviewed-on: https://review.gluster.org/17068
>NetBSD-regression: NetBSD Build System 
>CentOS-regression: Gluster Build System 
>Smoke: Gluster Build System 
>Reviewed-by: Amar Tumballi 
>Reviewed-by: Zhou Zhengping 
>Reviewed-by: Kaleb KEITHLEY 
>(cherry picked from commit 73fcf3a874b2049da31d01b8363d1ac85c9488c2)

Change-Id: I19d225b39aaa272d9005ba7adc3104c3764f1572
BUG: 1450267
Reviewed-on: https://review.gluster.org/17262
Tested-by: Poornima G 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Niels de Vos

glusterd: cleanup pidfile on pmap signout

2017-05-10T14:06:14+00:00

This patch ensures
1. brick pidfile is cleaned up on pmap signout
2. pmap signout evemt is sent for all the bricks when a brick process
shuts down.

>Reviewed-on: https://review.gluster.org/17168
>Smoke: Gluster Build System 
>NetBSD-regression: NetBSD Build System 
>CentOS-regression: Gluster Build System 
>Reviewed-by: Jeff Darcy 
>(cherry picked from commit 3d35e21ffb15713237116d85711e9cd1dda1688a)

Change-Id: I7606a60775b484651d4b9743b6037b40323931a2
BUG: 1449004
Signed-off-by: Atin Mukherjee 
Reviewed-on: https://review.gluster.org/17211
Reviewed-by: Prashanth Pai 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

glusterd: socketfile & pidfile related fixes for brick multiplexing feature

2017-05-10T14:05:52+00:00

Problem: While brick-muliplexing is on after restarting glusterd, CLI is
         not showing pid of all brick processes in all volumes.

Solution: While brick-mux is on all local brick process communicated through one
          UNIX socket but as per current code (glusterd_brick_start) it is trying
          to communicate with separate UNIX socket for each volume which is populated
          based on brick-name and vol-name.Because of multiplexing design only one
          UNIX socket is opened so it is throwing poller error and not able to
          fetch correct status of brick process through cli process.
          To resolve the problem write a new function glusterd_set_socket_filepath_for_mux
          that will call by glusterd_brick_start to validate about the existence of socketpath.
          To avoid the continuous EPOLLERR erros in  logs update socket_connect code.

Test:     To reproduce the issue followed below steps
          1) Create two distributed volumes(dist1 and dist2)
          2) Set cluster.brick-multiplex is on
          3) kill glusterd
          4) run command gluster v status
          After apply the patch it shows correct pid for all volumes

> BUG: 1444596
> Change-Id: I5d10af69dea0d0ca19511f43870f34295a54a4d2
> Signed-off-by: Mohit Agrawal 
> Reviewed-on: https://review.gluster.org/17101
> Smoke: Gluster Build System 
> Reviewed-by: Prashanth Pai 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Atin Mukherjee 
> (cherry picked from commit 21c7f7baccfaf644805e63682e5a7d2a9864a1e6)

Change-Id: Ia95b9d36e50566b293a8d6350f8316dafc27033b
BUG: 1449004
Signed-off-by: Mohit Agrawal 
Reviewed-on: https://review.gluster.org/17212
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Atin Mukherjee 
Reviewed-by: Prashanth Pai 
CentOS-regression: Gluster Build System

glusterd: Propagate EADDRINUSE correctly to parent process

2017-04-13T03:49:03+00:00

exit()/_exit():
Only the least significant 8 bits i.e (err & 255) shall be available
to the waiting parent process on calling _exit() or exit() with an
integer exit status. If this number is negative, the parent process
doesn't readily get what it's really looking forward to handle.

For example: EADDRINUSE is 98 and if exit status code is set to -98,
the waiting parent process shall get 158 (= -98 & 255) as exit status.

BUG: 1193929

Change-Id: Idc6b0f40c2332e087e584b4b40cbf0d29168c9cd
Signed-off-by: Prashanth Pai 
Reviewed-on: https://review.gluster.org/16200
NetBSD-regression: NetBSD Build System 
Reviewed-by: Amar Tumballi 
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System 
Reviewed-by: Atin Mukherjee

glusterfsd+libglusterfs: add null checks during attach

2017-03-10T02:14:33+00:00

It's possible (though unlikely) that we could get a brick-attach
request while we're not ready to process it (ctx->active not set yet).
Add code to guard against this possibility, and return appropriate
error indicators.

Change-Id: Icb3bc52ce749258a3f03cbbbdf4c2320c5c541a0
BUG: 1430860
Signed-off-by: Jeff Darcy 
Reviewed-on: https://review.gluster.org/16883
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Vijay Bellur

glusterfsd: don't quit (in client) on connection failure

2017-03-08T12:14:43+00:00

Change-Id: I32be91e9db361a45454d6340a4c4ac2d0d7efffc
BUG: 1430042
Signed-off-by: Jeff Darcy 
Reviewed-on: https://review.gluster.org/16866
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Prashanth Pai

rpc: avoid logging success on failure

2017-03-07T12:05:38+00:00

Avoid logging Success in the event of failure especially when errno has
no meaningful value w.r.t. the failure. In this case the errno is set to
zero when there's indeed a failure at the RPC level.

Change-Id: If2cc81aa1e590023ed22892dacbef7cac213e591
BUG: 1426032
Signed-off-by: Milind Changire 
Reviewed-on: https://review.gluster.org/16730
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: N Balachandran 
Reviewed-by: Jeff Darcy

core: Clean up pmap registry up correctly on volume/brick stop

2017-02-27T22:59:03+00:00

This commit changes the following:
1. In glusterfs_handle_terminate, send out individual pmap signout
requests to glusterd for every brick.
2. Add another parameter to glusterfs_mgmt_pmap_signout function to
pass the brickname that needs to be removed from the pmap registry.
3. Make sure pmap_registry_search doesn't break out from the loop
iterating over the list of bricks per port if the first brick entry
corresponding to a port is whitespaced out.
4. Make sure the pmap registry entries are removed for other
daemons like snapd.

Change-Id: I69949874435b02699e5708dab811777ccb297174
BUG: 1421590
Signed-off-by: Samikshan Bairagya 
Reviewed-on: https://review.gluster.org/16689
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Gaurav Yadav 
Reviewed-by: Jeff Darcy