glusterfs.git/cli/src/input.c, branch v3.12.5 GlusterFS is a distributed file-system capable of scaling to several petabytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. build: do not #include "config.h" in each file 2015-05-29T12:43:17+00:00 Niels de Vos ndevos@redhat.com 2015-05-18T14:26:02+00:00 8a9328e37b8c63d60583184dc8dab12f85810682 Instead of including config.h in each file, and have the additional config.h included from the compiler commandline (-include option). When a .c file tests for a certain #define, and config.h was not included, incorrect assumtions were made. With this change, it can not happen again. BUG: 1222319 Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10808 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> 
Instead of including config.h in each file, and have the additional
config.h included from the compiler commandline (-include option).

When a .c file tests for a certain #define, and config.h was not
included, incorrect assumtions were made. With this change, it can not
happen again.

BUG: 1222319
Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Reviewed-on: http://review.gluster.org/10808
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Tested-by: NetBSD Build System
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
cli: Don't override cli mode when stdin in not a tty 2014-01-15T06:27:09+00:00 Kaushal M kaushal@redhat.com 2014-01-13T07:12:31+00:00 f139fc7e44da27670e90bd7ba55ff80e7c8b8ecd Change-Id: I801c6e6ecd6c5a91e487e8e54ec5f684d450a080 BUG: 1047378 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/6687 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> 
Change-Id: I801c6e6ecd6c5a91e487e8e54ec5f684d450a080
BUG: 1047378
Signed-off-by: Kaushal M <kaushal@redhat.com>
Reviewed-on: http://review.gluster.org/6687
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
All: License message change 2012-09-13T20:19:37+00:00 Varun Shastry vshastry@redhat.com 2012-09-11T11:04:54+00:00 3e2057542da6a0f182243b527bc7f1fd43d1fd3c License message changed for server-side, dual license GPLV2 and LGPLv3+. Change-Id: Ia9e53061b9d2df3b3ef3bc9778dceff77db46a09 BUG: 852318 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/3940 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com> 
License message changed for server-side, dual license GPLV2 and LGPLv3+.

Change-Id: Ia9e53061b9d2df3b3ef3bc9778dceff77db46a09
BUG: 852318
Signed-off-by: Varun Shastry <vshastry@redhat.com>
Reviewed-on: http://review.gluster.org/3940
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
Reviewed-by: Anand Avati <avati@redhat.com>
cli: sanitize exit value 2012-09-06T19:18:08+00:00 Csaba Henk csaba@redhat.com 2012-09-06T15:52:11+00:00 632fdcaac9114282ecdaf1a88e3740565fda41c8 The pattern established in http://review.gluster.com/3218 as of which cli exits with negated return value of the command instrumentation function should be uniformly followed. (Prior to this commit whether cli exits with 255 or 1 on failure depended on the way of invocation.) Change-Id: Icbab1f435042b3321c689fa785109bf87195d86d BUG: 765214 Signed-off-by: Csaba Henk <csaba@redhat.com> Reviewed-on: http://review.gluster.org/3913 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com> 
The pattern established in http://review.gluster.com/3218
as of which cli exits with negated return value of the
command instrumentation function should be uniformly
followed. (Prior to this commit whether cli exits
with 255 or 1 on failure depended on the way of invocation.)

Change-Id: Icbab1f435042b3321c689fa785109bf87195d86d
BUG: 765214
Signed-off-by: Csaba Henk <csaba@redhat.com>
Reviewed-on: http://review.gluster.org/3913
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
All: License message change 2012-08-28T10:45:06+00:00 Varun Shastry vshastry@redhat.com 2012-08-27T11:18:55+00:00 2ff5e1c2a1c0fedd437d2d892dfab21f720f5a1c The license message is changed to Copyright (c) 2008-2012 Red Hat, Inc. <http://www.redhat.com> This file is part of GlusterFS. This file is licensed to you under your choice of the GNU Lesser General Public License, version 3 or any later version (LGPLv3 or later), or the GNU General Public License, version 2 (GPLv2), in all cases as published by the Free Software Foundation. Change-Id: I07d2b63ed5fbbbd1884f1e74f2dd56013d15b0f4 BUG: 852318 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/3858 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> 
The license message is changed to
  Copyright (c) 2008-2012 Red Hat, Inc. <http://www.redhat.com>
  This file is part of GlusterFS.

  This file is licensed to you under your choice of the GNU Lesser
  General Public License, version 3 or any later version (LGPLv3 or
  later), or the GNU General Public License, version 2 (GPLv2), in all
  cases as published by the Free Software Foundation.

Change-Id: I07d2b63ed5fbbbd1884f1e74f2dd56013d15b0f4
BUG: 852318
Signed-off-by: Varun Shastry <vshastry@redhat.com>
Reviewed-on: http://review.gluster.org/3858
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
cli: let commands specify the exit value in batch mode 2012-06-01T23:49:39+00:00 Csaba Henk csaba@redhat.com 2012-04-24T09:53:56+00:00 2084c0e3d748b7e28d2fc9749ad9d1e2bf63208c Old behavior: when cli is ran in batch mode (sequence of commands are fed to it in stdin), if a command returns an error (ie. -1), the cli exits upon it with 255 (-1 on 8 bit). New behavior: consider any non-zero return from cli commands as error and use the negative of that return value as exit value, thus giving control to cli commands over the exit value, while (as of the existing command set) adhering to the convention of exiting with 1 on error. Spotted upon stumbling upon mount/umount commands which did want to exit with 1 on error but that was not possible as of old behavior. Change-Id: I6f41191cdc718c3e676cfae1e404152f4cb715c5 BUG: 765214 Signed-off-by: Csaba Henk <csaba@redhat.com> Reviewed-on: http://review.gluster.com/3218 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com> 
Old behavior: when cli is ran in batch mode (sequence of commands are
fed to it in stdin), if a command returns an error (ie. -1), the cli
exits upon it with 255 (-1 on 8 bit).

New behavior: consider any non-zero return from cli commands as error
and use the negative of that return value as exit value, thus giving
control to cli commands over the exit value, while (as of the existing
command set) adhering to the convention of exiting with 1 on error.

Spotted upon stumbling upon mount/umount commands which did want
to exit with 1 on error but that was not possible as of old behavior.

Change-Id: I6f41191cdc718c3e676cfae1e404152f4cb715c5
BUG: 765214
Signed-off-by: Csaba Henk <csaba@redhat.com>
Reviewed-on: http://review.gluster.com/3218
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Amar Tumballi <amarts@redhat.com>
Reviewed-by: Anand Avati <avati@redhat.com>
Change Copyright current year 2011-08-10T17:57:19+00:00 Pranith Kumar K pranithk@gluster.com 2011-08-09T07:00:19+00:00 b58dc65f2ac305056a25a2177cee9a03cd1bdca2 Change-Id: I2d10f2be44f518f496427f257988f1858e888084 BUG: 3348 Reviewed-on: http://review.gluster.com/200 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@gluster.com> 
Change-Id: I2d10f2be44f518f496427f257988f1858e888084
BUG: 3348
Reviewed-on: http://review.gluster.com/200
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@gluster.com>
LICENSE: s/GNU Affero General Public/GNU General Public/ 2011-08-06T13:33:52+00:00 Pranith Kumar K pranithk@gluster.com 2011-08-06T08:30:03+00:00 0cf100b58c34b40eb7f35fa6913996539e0e3aa9 Change-Id: I3914467611e573cccee0d22df93920cf1b2eb79f BUG: 3348 Reviewed-on: http://review.gluster.com/182 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@gluster.com> 
Change-Id: I3914467611e573cccee0d22df93920cf1b2eb79f
BUG: 3348
Reviewed-on: http://review.gluster.com/182
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@gluster.com>
removed reference to GF_LOG_NORMAL 2011-04-07T18:40:25+00:00 Amar Tumballi amar@gluster.com 2011-04-07T07:44:51+00:00 62e1096fb01f7a12c5bc5ff77e3cb427248b80ad instead used GF_LOG_INFO, which is more standard log level. Signed-off-by: Amar Tumballi <amar@gluster.com> Signed-off-by: Vijay Bellur <vijay@gluster.com> BUG: 2669 (RuntimeError: cannot recognize log level "normal") URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2669 
instead used GF_LOG_INFO, which is more standard log level.

Signed-off-by: Amar Tumballi <amar@gluster.com>
Signed-off-by: Vijay Bellur <vijay@gluster.com>

BUG: 2669 (RuntimeError: cannot recognize log level "normal")
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2669
cli: make cli behave nicely with batch commands piped in in stdin 2010-09-17T06:07:38+00:00 Csaba Henk csaba@gluster.com 2010-09-15T08:11:17+00:00 cecc24958374cfecddd64535c10d53ead8c7ad24 Signed-off-by: Csaba Henk <csaba@gluster.com> Signed-off-by: Vijay Bellur <vijay@dev.gluster.com> BUG: 1570 (geosync related changes) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1570 
Signed-off-by: Csaba Henk <csaba@gluster.com>
Signed-off-by: Vijay Bellur <vijay@dev.gluster.com>

BUG: 1570 (geosync related changes)
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1570