glusterfs.git/cli/src/cli-rpc-ops.c, branch v3.8.8

cluster/afr: CLI for granular entry heal enablement/disablement

2016-11-29T10:52:25+00:00

        Backport of: http://review.gluster.org/15747
When there are already existing non-granular indices created that are
yet to be healed, if granular-entry-heal option is toggled from 'off' to
'on', AFR self-heal whenever it kicks in, will try to look for granular
indices in 'entry-changes'. Because of the absence of name indices,
granular entry healing logic will fail to heal these directories, and
worse yet unset pending extended attributes with the assumption that
are no entries that need heal.

To get around this, a new CLI is introduced which will invoke glfsheal
program to figure whether at the time an attempt is made to enable
granular entry heal, there are pending heals on the volume OR there
are one or more bricks that are down. If either of them is true, the
command will be failed with the appropriate error.

New CLI: gluster volume heal  granular-entry-heal {enable,disable}

Change-Id: I342e0390f847fcb015a50ef58aedfcbcb58f4ed3
BUG: 1398501
Signed-off-by: Krutika Dhananjay 
Reviewed-on: http://review.gluster.org/15942
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri

cli: fix volume status xml generation

2016-09-09T08:32:28+00:00

While generating xml, if CLI fails in between xml output doesn't get dumped into
stdout. Fix is to invoke cli_xml_output_vol_status_end () in such failures.

>Reviewed-on: http://review.gluster.org/15384
>NetBSD-regression: NetBSD Build System 
>CentOS-regression: Gluster Build System 
>Smoke: Gluster Build System 
>Reviewed-by: Samikshan Bairagya 
>Reviewed-by: Prashanth Pai 

Change-Id: I7cb3097f5ae23092e6d20f68bd75aa190c31ed88
BUG: 1374290
Signed-off-by: Atin Mukherjee 
Reviewed-on: http://review.gluster.org/15428
Smoke: Gluster Build System 
Reviewed-by: Samikshan Bairagya 
Reviewed-by: Prashanth Pai 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

build: correctly format some (s)size_t messages

2016-09-07T14:00:48+00:00

On 32-bit builds the are are warnings like these:

    posix.c:6438: warning: format '%ld' expects type 'long int', but argument 11 has type 'ssize_t'

Instead of using "%l" for (signed) size_t variables, "%z" should be
used.

Cherry picked from commit 3af889f02722f4636d2ea30570de6477e8b5a3a9:
> BUG: 1198849
> Change-Id: I6f57b5e8ea174dd9e3056aff5da685e497894ccf
> Signed-off-by: Niels de Vos 
> Reviewed-on: http://review.gluster.org/14933
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Kaleb KEITHLEY 
> Smoke: Gluster Build System 

This patch is not really recommended for backporting, but we do have a
new smoke test that fails when these warnings pop-up. It is cleaner to
correct the code in the release-3.7 branch then to modify the smoke test
to skip this branch.

Change-Id: I6f57b5e8ea174dd9e3056aff5da685e497894ccf
BUG: 1373530
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/15410
Reviewed-by: Kaleb KEITHLEY 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

snapshot: Display number of snapshots in volume info

2016-08-24T10:17:30+00:00

    Backport of http://review.gluster.org/#/c/15029/

Display number of snapshots in a volume in volume info
output. This number gets modified, with create, delete,
and restore operations.

> Reviewed-on: http://review.gluster.org/15029
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Rajesh Joseph 

(cherry picked from commit 1df4a89de17e44c8c1f9b4794a7b8c2741f2bc2e)

Change-Id: Ic9b7c2b6950980f8ce75ca362998c097ea7c863d
BUG: 1369328
Signed-off-by: Avra Sengupta 
Reviewed-on: http://review.gluster.org/15288
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Rajesh Joseph

snapshot/cli: Fix snapshot status xml output

2016-08-24T10:15:12+00:00

    Backport of http://review.gluster.org/#/c/14018/

snap status --xml errors out if a brick is down and
doesn't have pid. It is handled in the cli of the snap
status where "N/A" is displayed in such a scenario.
Handled the same in xml

snap status  --xml fails as the writer is
not initialised for the same. Using GF_SNAP_STATUS_TYPE_ITER
instead of GF_SNAP_STATUS_TYPE_SNAP for all snap's
status to differentiate between the two scenarios.

Added testcase volume-snapshot-xml.t to check
all snapshot commands xml outputs

> Reviewed-on: http://review.gluster.org/14018
> Smoke: Gluster Build System 
> CentOS-regression: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> Reviewed-by: Rajesh Joseph 

Change-Id: I99563e8f3e84f1aaeabd865326bb825c44f5c745
BUG: 1369372
Signed-off-by: Avra Sengupta 
Reviewed-on: http://review.gluster.org/15291
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Rajesh Joseph

feature/bitrot: Show whether scrub is in progress/idle

2016-07-18T10:53:50+00:00

Backport of http://review.gluster.org/14864/

Bitrot scrub status shows whether the scrub is paused
or active. It doesn't show whether the scrubber is
actually scrubbing or waiting in the timer wheel
for the next schedule. This patch shows this status
with "In Progress" and "Idle" respectively.

Change-Id: I995d8553d1ff166503ae1e7b46282fc3ba961f0b
BUG: 1355639
Signed-off-by: Kotresh HR 
(cherry picked from commit f4757d256e3e00132ef204c01ed61f78f705ad6b)
Reviewed-on: http://review.gluster.org/14901
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

cli: print volume status client output for partial bricks

2016-07-08T17:18:05+00:00

Backport of http://review.gluster.org/14842

In cli the response dictionary is parsed assuming all the bricks to be up.
If in a given cluster one of the node is down client details for the
bricks hosted by the same node are not available in the dictionary resulting
into a blank output for 'gluster volume status  clients'

Fix is to ignore the ret value for dict_get for those keys.

Change-Id: If4fb65b8807ea3ac71b3ed1a754ea75f599e3613
BUG: 1352926
Signed-off-by: Atin Mukherjee 
Reviewed-on: http://review.gluster.org/14842
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy 
Reviewed-on: http://review.gluster.org/14865
Reviewed-by: Kaushal M

Fix opRet value for volume info --xml call on non-existent volume

2016-07-07T04:17:50+00:00

The opRet field was being assigned to 0 in the XML output when a
gluster volume info --xml call is made on a non-existent volume.
This change assigns a value of -1 to opRet for volume info calls
for non-existent volumes. Other fields like opErrno and opErrstr
are also assigned relevant values

> Reviewed-on: http://review.gluster.org/13843
> Smoke: Gluster Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: darshan n 
> Reviewed-by: Atin Mukherjee 
> NetBSD-regression: NetBSD Build System 

(cherry picked from commit a6e551122c603ab0cba798e7e2b30d3a15191b68)

Change-Id: I3920c602328f74252c87bb521f5a43d4bdc7d44d
BUG: 1352880
Signed-off-by: Samikshan Bairagya 
Reviewed-on: http://review.gluster.org/14863
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

cli: different status output for rebalance fix-layout

2016-07-05T04:29:08+00:00

Backport of http://review.gluster.org/10956

> Change-Id: I6ded40a1b1cff5c72e5b61fd353db3d8c688efd8
> BUG: 1225718
> Signed-off-by: Sakshi 
> Reviewed-on: http://review.gluster.org/10956
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Raghavendra G 

Change-Id: I6ded40a1b1cff5c72e5b61fd353db3d8c688efd8
BUG: 1352393
Signed-off-by: Sakshi 
Reviewed-on: http://review.gluster.org/14851
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra G

tier/cli : printing a warning instead of skipping the node

2016-05-20T16:21:57+00:00

        back-port of : http://review.gluster.org/#/c/14347/8

Problem: skipping the status of the nodes down creates confusion
to the user as one might see the status as completed for all nodes
and while performing detach commit, the operation will fail as the
node is down

Fix: Display a warning message

Note: When the last node is down (as per the peer list) then
warning message can't be displayed as the total number of peers
participating in the transaction is considered to be the total count.

>Change-Id: Ib7afbd1b26df3378e4d537db06f41f5c105ad86e
>BUG: 1324439
>Signed-off-by: hari gowtham 

Change-Id: Id797bb45433c442f63b189ad16e0e95492a43721
BUG: 1337908
Signed-off-by: hari gowtham 
Reviewed-on: http://review.gluster.org/14459
Tested-by: hari gowtham 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Atin Mukherjee 
CentOS-regression: Gluster Build System