glusterfs.git/cli/src/cli-cmd-parser.c, branch v3.8.8

cluster/afr: CLI for granular entry heal enablement/disablement

2016-11-29T10:52:25+00:00

        Backport of: http://review.gluster.org/15747
When there are already existing non-granular indices created that are
yet to be healed, if granular-entry-heal option is toggled from 'off' to
'on', AFR self-heal whenever it kicks in, will try to look for granular
indices in 'entry-changes'. Because of the absence of name indices,
granular entry healing logic will fail to heal these directories, and
worse yet unset pending extended attributes with the assumption that
are no entries that need heal.

To get around this, a new CLI is introduced which will invoke glfsheal
program to figure whether at the time an attempt is made to enable
granular entry heal, there are pending heals on the volume OR there
are one or more bricks that are down. If either of them is true, the
command will be failed with the appropriate error.

New CLI: gluster volume heal  granular-entry-heal {enable,disable}

Change-Id: I342e0390f847fcb015a50ef58aedfcbcb58f4ed3
BUG: 1398501
Signed-off-by: Krutika Dhananjay 
Reviewed-on: http://review.gluster.org/15942
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri

geo-rep/cli: Validate Checkpoint label

2016-11-23T11:48:53+00:00

Checkpoint command accepts "now" or any other Time
in "%Y-%m-%d %H:%M:%S" format as label.

Validation added with this patch for the input label. Checkpoint set
will fail for invalid label.

> Reviewed-on: http://review.gluster.org/15721
> Smoke: Gluster Build System 
> CentOS-regression: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> Reviewed-by: Saravanakumar Arumugam 
> Reviewed-by: Kotresh HR 

BUG: 1395627
Change-Id: I23518c151ab4b294f64cae3b78baaacb3d8f7b82
Signed-off-by: Aravinda VK 
(cherry picked from commit 8a1993b32f476765f9f5c9294e7c3f2ae75198a0)
Reviewed-on: http://review.gluster.org/15855
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Niels de Vos

cli : provide prompt for the nfs-ganesha disable cli

2016-08-11T04:07:00+00:00

Presently, when we are executing the command "gluster nfs-ganesha disable",
the disable of nfs-ganesha cluster starts working whereas, in some cases
the user may not want to disable the cluster. So we shall let him know by
giving a prompt to let him say "yes or no" for going ahead with the disable
procedures.

	Backport of http://review.gluster.org/13450

> Change-Id: I860dad1479f7ca16bc2736b8056b609473bef65f
> BUG: 1289031
> Signed-off-by: Jiffin Tony Thottan 
> Reviewed-on: http://review.gluster.org/13450
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Kaleb KEITHLEY 
> Reviewed-by: Niels de Vos 
> Signed-off-by: Muthu-vigneshwaran 

Change-Id: I9b80ce1316cbba641b55cefe7870f4a67d59eb90
BUG: 1364382
Signed-off-by: Muthu-vigneshwaran 
Reviewed-on: http://review.gluster.org/15096
Tested-by: Muthu Vigneshwaran
Reviewed-by: jiffin tony Thottan 
Tested-by: jiffin tony Thottan 
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Manikandan Selvaganesh 
Reviewed-by: Atin Mukherjee

georep: add reset-sync-time option for session delete

2016-08-03T09:32:27+00:00

Set the stime xattr at all the brick roots to (0,0) if the argument
reset-sync-time has been provided on the command-line.
To avoid testing against directory specific stime, the remote
stime is assumed to be minus_infinity, if the root directory
stime is set to (0,0), before the directory scan begins.
This triggers a full volume resync to slave in the case of a
geo-rep session recreation with the same master-slave volume
pair.

Command synopsis:
gluster volume geo-replication  :: delete \
    [reset-sync-time]

Update gluster cli man page to include new sub-command reset-sync-time.

> Reviewed-on: http://review.gluster.org/14051
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Aravinda VK 
> Reviewed-by: Kotresh HR 

(cherry picked from commit 70fd68d94f768c098b3178c151fa92c5079a8cfd)

Change-Id: Ie4ce03b9425ed9bb81eda8681058c0fc6f990948
BUG: 1357773
Signed-off-by: Milind Changire 
Reviewed-on: http://review.gluster.org/14953
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Aravinda VK 
Reviewed-by: Niels de Vos

features/bitrot: Option to set scrub interval to a minute

2016-07-15T13:42:57+00:00

Backport of http://review.gluster.org/14836/

Bitrot scrub-frequency supports "hourly|daily|weekly|biweekly|monthly".
But it is painful for testing as minimum  scrub-interval is an hour
Hence introducing a scrub interval of minute to ease testing.
It is intentionally not exposed in bitrot command help as it is
only for testing.

e.g.,
gluster vol bitrot  scrub-frequency minute

Change-Id: I155a65298d3fad5ae9e529d9c7d4b0d25fa297c0
BUG: 1354429
Signed-off-by: Kotresh HR 
Reviewed-on: http://review.gluster.org/14836
(cherry picked from commit 7df1174f7bed2a00631cf17201f5217a053afeb1)
Reviewed-on: http://review.gluster.org/14890
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

glusterd/cli: coverity fixes

2016-07-04T10:19:56+00:00

Backport of http://review.gluster.org/#/c/14818/

A downstream coverity run has revealed few of the following coverity defects.
Since the downstream code is a clone of a specific upstream branch the defects
hold true for the upstream as well.

Defect type: NEGATIVE_RETURNS
xlators/mgmt/glusterd/src/glusterd-rpc-ops.c:641: negative_returns: "op_errno"
is passed to a parameter that cannot be negative.

Defect type: BUFFER_SIZE_WARNING
xlators/mgmt/glusterd/src/glusterd-volume-ops.c:2124: buffer_size_warning:
Calling strncpy with a maximum size argument of 261 bytes on destination array
"volinfo->volname" of size 261 bytes might leave the destination string
unterminated.

Defect type: BUFFER_SIZE_WARNING
xlators/mgmt/glusterd/src/glusterd-volgen.c:4888: buffer_size_warning: Calling
strncpy with a maximum size argument of 261 bytes on destination array
"volinfo->volname" of size 261 bytes might leave the destination string
unterminated.

Defect type: STRING_OVERFLOW
xlators/mgmt/glusterd/src/glusterd-volgen.c:3449: string_overflow: You might
overrun the 256 byte destination string "tmp_volname" by writing 261 bytes from
"volinfo->volname".

Defect type: BUFFER_SIZE_WARNING
xlators/mgmt/glusterd/src/glusterd-utils.c:3392: buffer_size_warning: Calling
strncpy with a maximum size argument of 261 bytes on destination array
"new_volinfo->volname" of size 261 bytes might leave the destination string
unterminated.

Defect type: NO_EFFECT
xlators/mgmt/glusterd/src/glusterd-utils.c:7359: remediation: Was
"rebal->rebalance_id" formerly declared as a pointer?

Defect type: USE_AFTER_FREE
xlators/mgmt/glusterd/src/glusterd-utils.c:7115: pass_freed_arg: Passing freed
pointer "volinfo" as an argument to "glusterd_friend_contains_vol_bricks".

Defect type: DEADCODE
cli/src/cli-cmd-parser.c:1767: dead_error_begin: Execution cannot reach this
statement: "ret = -1;".

Change-Id: Ie941bdf31923e2f39618dd94bfae16fdb3ad65f1
BUG: 1352281
Signed-off-by: Atin Mukherjee 
Reviewed-on: http://review.gluster.org/14818
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy 
Reviewed-on: http://review.gluster.org/14850
Reviewed-by: Prashanth Pai

cli: fix crash in arbiter keyword parsing

2016-06-20T11:41:29+00:00

Backport of http://review.gluster.org/#/c/14738/

A negative case like `gluster volume create volname arbiter 3 /bricks{1..3}`
must not crash. 'arbiter' keyword is valid only for (3 way) replica volumes.

The .t that is added will crash and create a core *without* the fix when
run but will still pass all TESTs. Since the regression framework fails
the .t if it creates a core,  we can consider it a valid test 'that
fails without the fix'.

Change-Id: Ie2d7ced66025ea3617d30f6f823b22401e6d2fde
BUG: 1348055
Signed-off-by: Ravishankar N 
(cherry picked from commit b5c492dfea2d2e2075aa88d7153fba57b06e739d)
Reviewed-on: http://review.gluster.org/14764
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Atin Mukherjee

cli/glusterd: add/remove brick fixes for arbiter volumes

2016-05-24T08:35:57+00:00

Backport of: http://review.gluster.org/14126

1.Provide a command to convert replica 2 volumes to arbiter volumes.
Existing self-heal logic will automatically heal the file hierarchy into
the arbiter brick, the progress of which can be monitored using the
heal info command.

Syntax: gluster volume add-brick  replica 3 arbiter 1


2. Add checks when removing bricks from arbiter volumes:
- When converting from arbiter to replica 2 volume, allow only arbiter
  brick to be removed.
- When converting from arbiter to plain distribute volume, allow only if
  arbiter is one of the bricks that is removed.

3. Some clean-up:
- Use GD_MSG_DICT_GET_SUCCESS instead of GD_MSG_DICT_GET_FAILED to
log messages that are not failures.
- Remove unused variable `brick_list`
- Move 'brickinfo->group' related functions to glusted-utils.

Change-Id: Ifa75d137c67ffddde7dcb8e0df0873163e713119
BUG: 1337387
Signed-off-by: Ravishankar N 
Reviewed-on: http://review.gluster.org/14502
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

core: assorted typos and spelling mistakes reported by Debian lintian

2016-05-18T13:55:02+00:00

Also missing bang (!) in #!/bin/bash in shell scripts.

Backport of
> http://review.gluster.org/#/c/14398/
> BUG: 1336793
> Change-Id: I567a4be8f0f31f6285550f243fe802895f6bc43b

Change-Id: I003554daede9937a41010e085c74e77957c5c608
BUG: 1336794
Reported-by: Patrick Matthäi 
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/14400
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System

afr: add mtime based split-brain resolution to CLI

2016-03-29T19:08:35+00:00

Extended the CLI to include support for split-brain resolution based on
mtime. The command syntax is:

$:gluster volume heal  split-brain latest-mtime 

where  can be either the full file name as seen from the root of the
volume (or) the gfid-string representation of the file.

Change-Id: I7a16f72ff1a4495aa69f43f22758a9404e958b4f
BUG: 1321322
Signed-off-by: Ravishankar N 
Reviewed-on: http://review.gluster.org/13828
Smoke: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System