glusterfs.git/cli/src/cli-cmd-parser.c, branch v3.11.3

cli: Adding warning message while creating a replica 2 volume

2017-04-25T15:21:59+00:00

Warn the CLI about ending up in split-brain situation with a
replica 2 volume. Display arbiter and replica 3 are recommended
option to avoid this and point to the document on split-brain
and ways to deal with it.

Change-Id: I7f31f3c74818d440a684b3130bc5ccdc72258f01
BUG: 1431963
Signed-off-by: karthik-us 
Reviewed-on: https://review.gluster.org/16899
Reviewed-by: Pranith Kumar Karampuri 
Tested-by: Pranith Kumar Karampuri 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

glusterd: Add client details to get-state output

2017-04-13T03:43:08+00:00

This commit optionally adds client details corresponding to the
locally running bricks to the get-state output. Since getting
the client details involves sending RPC requests to the respective
local bricks, this is a relatively more costly operation. These
client details would be added to the get-state output only if the
get-state command is invoked with the 'detail' option.

This commit therefore also changes the get-state CLI usage. The
modified usage is as follows:

 # gluster get-state [] [[odir ] \
[file ]] [detail]

Change-Id: I42cd4ef160f9e96d55a08a10d32c8ba44e4cd3d8
BUG: 1431183
Signed-off-by: Samikshan Bairagya 
Reviewed-on: https://review.gluster.org/17003
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

glusterd: (storhaug) remove ganesha

2017-03-21T17:13:44+00:00

remove all vestiges of ganesha

The storhaug CLI is used to manage ganesha and Samba. Also any setup
and teardown of the ganesha HA is initiated using storhaug to preserve
the proper layering.

Change-Id: I0eec0016a1b7802a36e7b2d92896b86fdf8607d5
BUG: 1420713
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: https://review.gluster.org/16504
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

dnt: Add a GF_DEFRAG_CMD_NONE to gf_defrag_type

2017-02-26T16:31:25+00:00

Coverity complain about enum mismatch since we assign GF_OP_CMD_NONE
to a variable holding gf_defrag_type.

Change-Id: I63e71f552b3cc752c26c1b8705420f38908e17e6
BUG: 789278
Signed-off-by: Michael Scherer 
Reviewed-on: https://review.gluster.org/16756
Smoke: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan 
Tested-by: Michael Scherer 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

CLI/TIER: removing old tier commands under rebalance

2017-02-07T06:36:27+00:00

PROBLEM: gluster v rebalance  tier start works even after
the switch of tier to service framework.
This lets the user have two tierd for the same volume.

FIX: checking for each process will make the new code hard
to maintain. So we are removing the support for old commands.

Change-Id: I5b0974b2dbb74f0bee8344b61c7f924300ad73f2
BUG: 1415590
Signed-off-by: hari gowtham 
Reviewed-on: https://review.gluster.org/16463
Smoke: Gluster Build System 
Tested-by: hari gowtham 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: N Balachandran 
Reviewed-by: Atin Mukherjee

glusterd: add a cli command to trigger a statedump on a client

2017-01-24T00:13:15+00:00

With this, we will be able to trigger statedumps on remote Gluster
clients, mainly targetted for applications using libgfapi.

Design:
SIGUSR signal is the most comman way of taking a statedump in Gluster.
But it cannot be used for libgfapi based processes, as the process
loading the library might have already consumed SIGUSR signal. Hence
going by the command way.

One has to issue a Gluster command to initiate a statedump on the
libgfapi based client. The command takes hostname and PID as an
argument. All the glusterds in the cluster, check if they are connected
to the specified hostname, and send an RPC request to all the connected
clients from that hostname (via the mgmt connection).

URL: http://review.gluster.org/16357
Change-Id: Icbe4d2f026b32a2c7d5535e1bfb2cdaaff042e91
BUG: 1169302
Signed-off-by: Poornima G 
[ndevos: minor fixes and split patch in smaller pieces]
Reviewed-on: https://review.gluster.org/9228
Reviewed-by: Niels de Vos 
Tested-by: Niels de Vos 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Kaleb KEITHLEY 
CentOS-regression: Gluster Build System 
Reviewed-by: Samikshan Bairagya

tier : Tier as a service

2017-01-17T04:49:47+00:00

tierd is implemented by separating from rebalance process.

The commands affected:

1) Attach tier will trigger this process instead of old one
2) tier start and tier start force will also trigger this process.
3) volume status [tier] will show tier daemon as a process instead
of task and normal tier status and tier detach status works.
4) tier stop implemented.
5) detach tier implemented separately along with new detach tier
status
6) volume tier volname status will work using the changes.
7) volume set works

This patch has separated the tier translator from the legacy
DHT rebalance code. It now sends the RPCs from the CLI
to glusterd separate to the DHT rebalance code.
The daemon is now a service, similar to the snapshot daemon,
and can be viewed using the volume status command.

The code for the validation and commit phase are the same
as the earlier tier validation code in DHT rebalance.

The “brickop” phase has been changed so that the status
command can use this framework.

The service management framework is now used.
DHT rebalance does not use this framework.

This service framework takes care of :

*) spawning the daemon, killing it and other such processes.
*) volume set options , which are written on the volfile.
*) restart and reconfigure functions. Restart is to restart
the daemon at two points
        1)after gluster goes down and comes up.
        2) to stop detach tier.
*) reconfigure is used to make immediate volfile changes.
By doing this, we don’t restart the daemon.
it has the code to rewrite the volfile for topological
changes too (which comes into place during add and remove brick).

With this patch the log, pid, and volfile are separated
and put into respective directories.

Change-Id: I3681d0d66894714b55aa02ca2a30ac000362a399
BUG: 1313838
Signed-off-by: hari gowtham 
Reviewed-on: http://review.gluster.org/13365
Smoke: Gluster Build System 
Tested-by: hari gowtham 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Dan Lambright 
Reviewed-by: Atin Mukherjee

cli/geo-rep: Fix geo-rep status detail

2017-01-13T02:54:58+00:00

Earlier this command works when master and slave volume args are
given. Now it works even when no volume args are given (i.e. 'gluster
volume geo-replication status detail) and also when master volume is given
(i.e.'gluster volume geo-replication  status detail').

BUG: 1410071
Signed-off-by: SonaArora 
Change-Id: I1a39241a4a5d70c20b2326599b3cccd8f1f6dc78
Reviewed-on: http://review.gluster.org/16347
Smoke: Gluster Build System 
Tested-by: Kotresh HR 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Kotresh HR

cluster/afr: CLI for granular entry heal enablement/disablement

2016-11-28T11:56:33+00:00

When there are already existing non-granular indices created that are
yet to be healed, if granular-entry-heal option is toggled from 'off' to
'on', AFR self-heal whenever it kicks in, will try to look for granular
indices in 'entry-changes'. Because of the absence of name indices,
granular entry healing logic will fail to heal these directories, and
worse yet unset pending extended attributes with the assumption that
are no entries that need heal.

To get around this, a new CLI is introduced which will invoke glfsheal
program to figure whether at the time an attempt is made to enable
granular entry heal, there are pending heals on the volume OR there
are one or more bricks that are down. If either of them is true, the
command will be failed with the appropriate error.

New CLI: gluster volume heal  granular-entry-heal {enable,disable}

Change-Id: I1f4fe8162813b9068e198965d94169fee4adc099
BUG: 1370410
Signed-off-by: Krutika Dhananjay 
Reviewed-on: http://review.gluster.org/15747
Smoke: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

geo-rep/cli: Validate Checkpoint label

2016-11-16T10:09:29+00:00

Checkpoint command accepts "now" or any other Time
in "%Y-%m-%d %H:%M:%S" format as label.

Validation added with this patch for the input label. Checkpoint set
will fail for invalid label.

BUG: 1388401
Change-Id: I23518c151ab4b294f64cae3b78baaacb3d8f7b82
Signed-off-by: Aravinda VK 
Reviewed-on: http://review.gluster.org/15721
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Saravanakumar Arumugam 
Reviewed-by: Kotresh HR