glusterfs.git/cli/src/Makefile.am, branch v3.7.16

NFS-Ganesha: Handling CLI commands when NFS-Ganesha keys are set

2015-05-03T11:34:42+00:00

When ganesha.enable is set to on and features.ganesha is
enabled, there are a few behaviour changes that should
be seen in other volume operations.

1. ganesha.enable can be set to 'on' only
when features.ganesha is set to 'enable'

2.When gluster vol is started, and if ganesha.enable
key was set to 'on', it should automatically export the volume
via NFS-Ganesha.

3.When ganesha.enable is set to 'on', and a volume
is stopped, that volume should be unexported via NFS-Ganesha.

4. gluster vol reset 
If ganesha.enable was set to on, then unexport the
volume via NFS-Ganesha.

5. gluster vol reset all
If features.ganesha is set to enable, as part
of reset all, set it to disable. This translates
to teardown cluster.

All the above problems are fixed by checking the global key
and value, depending on the value, specific functions are called.
And also, functions related to global commands
are moved to cli-cmd-global.c

Commit phase of features.ganesha enable/disable
runs the ganesha-ha.sh setup/teardown respectively.
Before the script begins, it is important that the
NFS-Ganesha service starts on all the HA nodes.
Having the start service commands in the
commit phase could lead to problems.
Moving the pre-requisite service start
commands to the 'stage' phase.

Change-Id: I9084d004c0aaf960f59ed8aa2d7f1c9309924658
BUG: 1217793
Signed-off-by: Meghana Madhusudhan 
Reviewed-on: http://review.gluster.org/10489
Reviewed-by: Kaleb KEITHLEY 
Tested-by: NetBSD Build System
Tested-by: Gluster Build System 
Reviewed-by: Niels de Vos

Fix case mistake for MKDIR_P in Makefiles

2015-04-23T05:31:42+00:00

Some makefiles used $(mkdir_p) instead of the corectly defined $(MKDIR_P).
The former is substituted as an empty string, leading to possible failures
depending of the user shell tolerance. NetBSD's /bin/sh seems to choke
more easily than Linux's /bin/bash, but if the later does not fail, it
does not created the intended directories anyway.

Resubmit after rebase in hope that regression test will have less
spurious failures.

Backport of: I8caed4000f3c91cb3a685453848fb854793945ed

BUG: 1212676
Change-Id: I393ffda8aa24bffce86f7b1f19b999ffa30c3562
Signed-off-by: Emmanuel Dreyfus 
Reviewed-on: http://review.gluster.org/10279
Tested-by: NetBSD Build System
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

build: make GLUSTERD_WORKDIR rely on localstatedir

2014-08-07T08:17:29+00:00

- Break-way from '/var/lib/glusterd' hard-coded previously,
  instead rely on 'configure' value from 'localstatedir'
- Provide 's/lib/db' as default working directory for gluster
  management daemon for BSD and Darwin based installations
- loff_t is really off_t on Darwin
- fix-off the warnings generated by clang on FreeBSD/Darwin
- Now 'tests/*' use GLUSTERD_WORKDIR a common variable for all
  platforms.
- Define proper environment for running tests, define correct PATH
  and LD_LIBRARY_PATH when running tests, so that the desired version
  of glusterfs is used, regardless where it is installed.
  (Thanks to manu@netbsd.org for this additional work)

Change-Id: I2339a0d9275de5939ccad3e52b535598064a35e7
BUG: 1111774
Signed-off-by: Harshavardhana 
Signed-off-by: Emmanuel Dreyfus 
Reviewed-on: http://review.gluster.org/8246
Tested-by: Gluster Build System

build: MacOSX Porting fixes

2014-04-24T21:41:48+00:00

git@forge.gluster.org:~schafdog/glusterfs-core/osx-glusterfs

Working functionality on MacOSX

 - GlusterD (management daemon)
 - GlusterCLI (management cli)
 - GlusterFS FUSE (using OSXFUSE)
 - GlusterNFS (without NLM - issues with rpc.statd)

Change-Id: I20193d3f8904388e47344e523b3787dbeab044ac
BUG: 1089172
Signed-off-by: Harshavardhana 
Signed-off-by: Dennis Schafroth 
Tested-by: Harshavardhana 
Tested-by: Dennis Schafroth 
Reviewed-on: http://review.gluster.org/7503
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

gluster: GlusterFS Volume Snapshot Feature

2014-04-11T23:29:17+00:00

This is the initial patch for the Snapshot feature. Current patch
includes following features:
* Snapshot create
* Snapshot delete
* Snapshot restore
* Snapshot list
* Snapshot info
* Snapshot status
* Snapshot config

Change-Id: I2f46920c0d61c515f6a60e0f8b46fff886d9f6a9
BUG: 1061685
Signed-off-by: shishir gowda 
Signed-off-by: Sachin Pandit 
Signed-off-by: Vijaikumar M 
Signed-off-by: Raghavendra Bhat 
Signed-off-by: Rajesh Joseph 
Signed-off-by: Joseph Fernandes 
Signed-off-by: Avra Sengupta 
Reviewed-on: http://review.gluster.org/7128
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

Create /var/run/gluster at install time

2014-01-23T04:43:19+00:00

BUG: 764655
Change-Id: I67c33984a797bc92c7035724695c5ef2bbdf5267
Signed-off-by: Emmanuel Dreyfus 
Reviewed-on: http://review.gluster.org/6750
Reviewed-by: Niels de Vos 
Tested-by: Gluster Build System

cli/glusterd: Changes to quota command Quota feature

2013-11-26T18:25:27+00:00

 re-work.

Following are the cli commands that are new/re-worked:
======================================================

volume quota  {enable|disable|list [ ...]|remove | default-soft-limit } |
volume quota  {limit-usage   []} |
volume quota  {alert-time|soft-timeout|hard-timeout} {}
volume status [all |  [nfs|shd||quotad]] [detail|clients|mem|inode|fd|callpool]
volume statedump  [nfs|quotad] [all|mem|iobuf|callpool|priv|fd|inode|history]

glusterd changes:
=================
* Quota limits are now set as extended attributes by glusterd from
  the aux mount created by the cli.
* The gfids of the directories on which quota limits are set
  for a given volume are stored in
  /var/lib/glusterd/vols//quota.conf file in binary format,
  and whose cksum and version is stored in
  /var/lib/glusterd/vols//quota.cksum.

Original-author: Krutika Dhananjay 
Original-author: Krishnan Parthasarathi 

BUG: 969461
Change-Id: If32bba36c67f9c2a30417af9c6389045b2b7c13b
Signed-off-by: Krutika Dhananjay 
Signed-off-by: Raghavendra G 
Reviewed-on: http://review.gluster.org/6003
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

bd_map: Remove bd_map xlator

2013-11-13T19:38:28+00:00

Remove bd_map xlator and CLI related changes.

Change-Id: If7086205df1907127c1a1fa4ba603f1c48421d09
BUG: 1028672
Signed-off-by: M. Mohan Kumar 
Reviewed-on: http://review.gluster.org/5747
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

config: better (i.e. more portable) test for libxml2

2013-03-25T21:50:25+00:00

Over the weekend I tried to build on MacOS X¹ and ran into the following
issues:
1) The recent change to autogen.sh to test for pkg-config falls down.
2) After removing the pkg-config test in autogen.sh, w/o pkg-config the
   PKG_CHECK_MODULES macro invocation in configure[.ac] falls down. N.B.
   Solaris users run into this too, even through there's a (broken)
   pkg-config package that can be installed.
3) There are other problems in the code related to fuse that are beyond the
   scope of this.

It seems that pkg-config is only a requirement for the definition of the
PKG_CHECK_MODULES macro used to detect libxml2. Since this seems to be
inherently unportable — at least to MacOS X and Solaris — I'd like to:
A) Change the use of the PKG_CHECK_MODULES macro to the more portable
   AM_PATH_XML2 macro provided by the libxml2 package in
   /usr/.../share/aclocal/libxml.m4
2) Revisit the decision to add the check for pkg-config in autogen.sh in
   BZ 921817.

For now this is just an rfc. If people are agreeable I'll reenter this
change against BZ 921817.

¹Mountain Lion 10.8.3, XCode 4.6.1

Change-Id: I237b1ed8919088345b8fd943423b2a6ad289981b
BUG: 921817
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/4720
Reviewed-by: Justin Clift 
Tested-by: Justin Clift 
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

BD Backend: CLI commands to create/delete image

2012-11-29T17:39:53+00:00

Cli commands  added to create/delete a LV device.

The following command creates lv in a given vg.
$ gluster bd create :/ 

The following command deletes lv in a given vg.
$ gluster bd delete :/

BUG: 805138
Change-Id: Ie4e100eca14e2ee32cf2bb4dd064b17230d673bf
Signed-off-by: M. Mohan Kumar 
Reviewed-on: http://review.gluster.org/3718
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur