Add support for building internationalized translations.

A new directory install/po has been added which contains all
the translations for all files in IPA.

The build has been agumented to build these files. Also the
autogen.sh script was mostly replaced by autoreconf, the preferred
method. The old autogen.sh sript also had some serious bugs in the
way it compared versions which caused it to run old versions of some
of the tools, using standared autoreconf is much better.

1 files changed, 10 insertions, 204 deletions

diff --git a/autogen.sh b/autogen.sh
index 2956e51cd..99b4805d0 100755
--- a/autogen.sh
+++ b/autogen.sh
@@ -1,208 +1,14 @@
 #!/bin/sh
-# Run this to generate all the initial makefiles, etc.
-set -e
 
-PACKAGE=freeipa
-
-LIBTOOLIZE=${LIBTOOLIZE-libtoolize}
-LIBTOOLIZE_FLAGS="--copy --force"
-AUTOHEADER=${AUTOHEADER-autoheader}
-AUTOMAKE_FLAGS="--add-missing --gnu"
-AUTOCONF=${AUTOCONF-autoconf}
-
-# automake 1.8 requires autoconf 2.58
-# automake 1.7 requires autoconf 2.54
-automake_min_vers=1.7
-aclocal_min_vers=$automake_min_vers
-autoconf_min_vers=2.54
-libtoolize_min_vers=1.4
-
-# The awk-based string->number conversion we use needs a C locale to work 
-# as expected. Setting LC_ALL overrides whether the user set LC_ALL,
-# LC_NUMERIC, or LANG.
-LC_ALL=C
-
-ARGV0=$0
-
-# Allow invocation from a separate build directory; in that case, we change
-# to the source directory to run the auto*, then change back before running configure
-#srcdir=`dirname $ARGV0`
-#test -z "$srcdir" && srcdir=.
-srcdir="."
-
-#ORIGDIR=`pwd`
-
-#cd $srcdir
-
-# Usage:
-#     compare_versions MIN_VERSION ACTUAL_VERSION
-# returns true if ACTUAL_VERSION >= MIN_VERSION
-compare_versions() {
-    ch_min_version=$1
-    ch_actual_version=$2
-    ch_status=0
-    IFS="${IFS=         }"; ch_save_IFS="$IFS"; IFS="."
-    set $ch_actual_version
-    for ch_min in $ch_min_version; do
-        ch_cur=`echo $1 | sed 's/[^0-9].*$//'`; shift # remove letter suffixes
-        if [ -z "$ch_min" ]; then break; fi
-        if [ -z "$ch_cur" ]; then ch_status=1; break; fi
-        if [ $ch_cur -gt $ch_min ]; then break; fi
-        if [ $ch_cur -lt $ch_min ]; then ch_status=1; break; fi
-    done
-    IFS="$ch_save_IFS"
-    return $ch_status
-}
-
-if ($AUTOCONF --version) < /dev/null > /dev/null 2>&1 ; then
-    if ($AUTOCONF --version | head -n 1 | awk 'NR==1 { if( $(NF) >= '$autoconf_min_vers') \
-			       exit 1; exit 0; }');
-    then
-       echo "$ARGV0: ERROR: \`$AUTOCONF' is too old."
-       $AUTOCONF --version
-       echo "           (version $autoconf_min_vers or newer is required)"
-       DIE="yes"
-    fi
-else
-    echo $AUTOCONF: command not found
-    echo
-    echo "$ARGV0: ERROR: You must have \`autoconf' installed to compile $PACKAGE."
-    echo "           (version $autoconf_min_vers or newer is required)"
-    DIE="yes"
-fi
-
-#
-# Hunt for an appropriate version of automake and aclocal; we can't
-# assume that 'automake' is necessarily the most recent installed version
-#
-# We check automake first to allow it to be a newer version than we know about.
-#
-if test x"$AUTOMAKE" = x || test x"$ACLOCAL" = x ; then
-  am_ver=""
-  for ver in "" "-1.9" "-1.8" "-1.7" ; do
-    am="automake$ver"
-    if ($am --version) < /dev/null > /dev/null 2>&1 ; then
-      if ($am --version | head -n 1 | awk 'NR==1 { if( $(NF) >= '$automake_min_vers') \
-	  		 exit 1; exit 0; }'); then : ; else
-         am_ver=$ver
-         break;
-      fi
-    fi
-  done
-
-  AUTOMAKE=${AUTOMAKE-automake$am_ver}
-  ACLOCAL=${ACLOCAL-aclocal$am_ver}
-fi
-
-#
-# Now repeat the tests with the copies we decided upon and error out if they
-# aren't sufficiently new.
-#
-if ($AUTOMAKE --version) < /dev/null > /dev/null 2>&1 ; then
-      automake_actual_version=`$AUTOMAKE --version | head -n 1 | \
-                               sed 's/^.*[ 	]\([0-9.]*[a-z]*\).*$/\1/'`
-      if ! compare_versions $automake_min_vers $automake_actual_version; then
-	  echo "$ARGV0: ERROR: \`$AUTOMAKE' is too old."
-	  $AUTOMAKE --version
-	  echo "           (version $automake_min_vers or newer is required)"
-	  DIE="yes"
-      fi
-  if ($ACLOCAL --version) < /dev/null > /dev/null 2>&1; then
-      aclocal_actual_version=`$ACLOCAL --version | head -n 1 | \
-                               sed 's/^.*[ 	]\([0-9.]*[a-z]*\).*$/\1/'`
-
-      if ! compare_versions $aclocal_min_vers $aclocal_actual_version; then
-	  echo "$ARGV0: ERROR: \`$ACLOCAL' is too old."
-	  $ACLOCAL --version
-	  echo "           (version $aclocal_min_vers or newer is required)"
-	  DIE="yes"
-      fi
-  else
-    echo $ACLOCAL: command not found
-    echo
-    echo "$ARGV0: ERROR: Missing \`$ACLOCAL'"
-    echo "           The version of $AUTOMAKE installed doesn't appear recent enough."
-    DIE="yes"
-  fi
-else
-    echo $AUTOMAKE: command not found
-    echo
-    echo "$ARGV0: ERROR: You must have \`automake' installed to compile $PACKAGE."
-    echo "           (version $automake_min_vers or newer is required)"
-    DIE="yes"
-fi
-
-if ($LIBTOOLIZE --version) < /dev/null > /dev/null 2>&1 ; then
-    if ($LIBTOOLIZE --version | awk 'NR==1 { if( $4 >= '$libtoolize_min_vers') \
-			       exit 1; exit 0; }');
-    then
-       echo "$ARGV0: ERROR: \`$LIBTOOLIZE' is too old."
-       echo "           (version $libtoolize_min_vers or newer is required)"
-       DIE="yes"
+# automake demands these files exist when run in gnu mode which is the default,
+# automake can be run in foreign mode to avoid failing on the absence of these
+# files, but unfortunately there is no way to pass the --foreign flag to
+# automake when run from autoreconf.
+for f in NEWS README AUTHORS ChangeLog; do
+    if [ ! -e $f ]; then
+        touch $f
     fi
-else
-    echo $LIBTOOLIZE: command not found
-    echo
-    echo "$ARGV0: ERROR: You must have \`libtoolize' installed to compile $PACKAGE."
-    echo "           (version $libtoolize_min_vers or newer is required)"
-    DIE="yes"
-fi
-
-if test -z "$ACLOCAL_FLAGS"; then
-    acdir=`$ACLOCAL --print-ac-dir`
-    if [ ! -f $acdir/pkg.m4 ]; then
-	echo "$ARGV0: Error: Could not find pkg-config macros."
-	echo "        (Looked in $acdir/pkg.m4)"
-	echo "        If pkg.m4 is available in /another/directory, please set"
-	echo "        ACLOCAL_FLAGS=\"-I /another/directory\""
-	echo "        Otherwise, please install pkg-config."
-	echo ""
-	echo "pkg-config is available from:"
-	echo "http://www.freedesktop.org/software/pkgconfig/"
-	DIE=yes
-    fi
-fi
-
-if test "X$DIE" != X; then
-  exit 1
-fi
-
-
-if test -z "$*"; then
-  echo "$ARGV0:	Note: \`./configure' will be run with no arguments."
-  echo "		If you wish to pass any to it, please specify them on the"
-  echo "		\`$0' command line."
-  echo
-fi
-
-do_cmd() {
-    echo "$ARGV0: running \`$@'"
-    $@
-}
-
-# I don't want a tool telling me what files I need to have
-remauto=0
-if [ ! -e AUTHORS ]; then
-    touch AUTHORS ChangeLog NEWS README
-    remauto=1
-fi
-
-do_cmd $LIBTOOLIZE $LIBTOOLIZE_FLAGS
-
-do_cmd $ACLOCAL $ACLOCAL_FLAGS
-
-do_cmd $AUTOHEADER
-
-do_cmd $AUTOMAKE $AUTOMAKE_FLAGS
-
-do_cmd $AUTOCONF
-
-if [ $remauto -eq 1 ]; then
-    rm -f AUTHORS ChangeLog NEWS README
-fi
-
-#cd $ORIGDIR || exit 1
-
-rm -f config.cache
+done
 
-do_cmd $srcdir/configure --cache-file=config.cache --disable-static --enable-maintainer-mode --enable-gtk-doc ${1+"$@"} && echo "Now type \`make' to compile" || exit 1
+autoreconf -i
+./configure ${1+"$@"}