From 1d44b6f3fcf6058fb7c960b7558766967e8028f7 Mon Sep 17 00:00:00 2001
From: Anton Arapov <anton@redhat.com>
Date: Tue, 7 Aug 2012 11:21:50 +0200
Subject: fedora kernel: 222b075b3ff0d9e88aa9353e3c80667756ed7361

Signed-off-by: Anton Arapov <anton@redhat.com>
---
 arch/arm/mach-omap2/board-igep0020.c | 118 +++++++++++++----------------------
 1 file changed, 43 insertions(+), 75 deletions(-)

(limited to 'arch/arm/mach-omap2/board-igep0020.c')

diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 740cee9369b..74915295482 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -24,6 +24,8 @@
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
 
+#include <linux/mtd/nand.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -32,13 +34,15 @@
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 #include <plat/onenand.h>
 
 #include "mux.h"
 #include "hsmmc.h"
 #include "sdram-numonyx-m65kxxxxam.h"
 #include "common-board-devices.h"
+#include "board-flash.h"
+#include "control.h"
 
 #define IGEP2_SMSC911X_CS       5
 #define IGEP2_SMSC911X_GPIO     176
@@ -60,6 +64,10 @@
 #define IGEP3_GPIO_LED1_RED	16
 #define IGEP3_GPIO_USBH_NRESET  183
 
+#define IGEP_SYSBOOT_MASK           0x1f
+#define IGEP_SYSBOOT_NAND           0x0f
+#define IGEP_SYSBOOT_ONENAND        0x10
+
 /*
  * IGEP2 Hardware Revision Table
  *
@@ -110,8 +118,10 @@ static void __init igep2_get_revision(void)
 	gpio_free(IGEP2_GPIO_LED1_RED);
 }
 
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+#if defined(CONFIG_MTD_ONENAND_OMAP2) ||		\
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) ||	\
+	defined(CONFIG_MTD_NAND_OMAP2) ||		\
+	defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 
 #define ONENAND_MAP             0x20000000
 
@@ -123,7 +133,7 @@ static void __init igep2_get_revision(void)
  * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
  */
 
-static struct mtd_partition igep_onenand_partitions[] = {
+static struct mtd_partition igep_flash_partitions[] = {
 	{
 		.name           = "X-Loader",
 		.offset         = 0,
@@ -151,50 +161,28 @@ static struct mtd_partition igep_onenand_partitions[] = {
 	},
 };
 
-static struct omap_onenand_platform_data igep_onenand_data = {
-	.parts = igep_onenand_partitions,
-	.nr_parts = ARRAY_SIZE(igep_onenand_partitions),
-	.dma_channel	= -1,	/* disable DMA in OMAP OneNAND driver */
-};
-
-static struct platform_device igep_onenand_device = {
-	.name		= "omap2-onenand",
-	.id		= -1,
-	.dev = {
-		.platform_data = &igep_onenand_data,
-	},
-};
+static inline u32 igep_get_sysboot_value(void)
+{
+	return omap_ctrl_readl(OMAP343X_CONTROL_STATUS) & IGEP_SYSBOOT_MASK;
+}
 
 static void __init igep_flash_init(void)
 {
-	u8 cs = 0;
-	u8 onenandcs = GPMC_CS_NUM + 1;
-
-	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
-		u32 ret;
-		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
-		/* Check if NAND/oneNAND is configured */
-		if ((ret & 0xC00) == 0x800)
-			/* NAND found */
-			pr_err("IGEP: Unsupported NAND found\n");
-		else {
-			ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
-			if ((ret & 0x3F) == (ONENAND_MAP >> 24))
-				/* ONENAND found */
-				onenandcs = cs;
-		}
-	}
-
-	if (onenandcs > GPMC_CS_NUM) {
-		pr_err("IGEP: Unable to find configuration in GPMC\n");
-		return;
+	u32 mux;
+	mux = igep_get_sysboot_value();
+
+	if (mux == IGEP_SYSBOOT_NAND) {
+		pr_info("IGEP: initializing NAND memory device\n");
+		board_nand_init(igep_flash_partitions,
+				ARRAY_SIZE(igep_flash_partitions),
+				0, NAND_BUSWIDTH_16);
+	} else if (mux == IGEP_SYSBOOT_ONENAND) {
+		pr_info("IGEP: initializing OneNAND memory device\n");
+		board_onenand_init(igep_flash_partitions,
+				   ARRAY_SIZE(igep_flash_partitions), 0);
+	} else {
+		pr_err("IGEP: Flash: unsupported sysboot sequence found\n");
 	}
-
-	igep_onenand_data.cs = onenandcs;
-
-	if (platform_device_register(&igep_onenand_device) < 0)
-		pr_err("IGEP: Unable to register OneNAND device\n");
 }
 
 #else
@@ -444,28 +432,15 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
 	.setup		= igep_twl_gpio_setup,
 };
 
-static int igep2_enable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
-
-	return 0;
-}
-
-static void igep2_disable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= igep2_enable_dvi,
-	.platform_disable	= igep2_disable_dvi,
-	.i2c_bus_num = 3,
+static struct tfp410_platform_data dvi_panel = {
+	.i2c_bus_num		= 3,
+	.power_down_gpio	= IGEP2_GPIO_DVI_PUP,
 };
 
 static struct omap_dss_device igep2_dvi_device = {
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.name			= "dvi",
-	.driver_name		= "dvi",
+	.driver_name		= "tfp410",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
@@ -480,14 +455,6 @@ static struct omap_dss_board_info igep2_dss_data = {
 	.default_device	= &igep2_dvi_device,
 };
 
-static void __init igep2_display_init(void)
-{
-	int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH,
-				   "GPIO_DVI_PUP");
-	if (err)
-		pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
-}
-
 static struct platform_device *igep_devices[] __initdata = {
 	&igep_vwlan_device,
 };
@@ -540,7 +507,10 @@ static void __init igep_i2c_init(void)
 {
 	int ret;
 
-	omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0);
+	omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB,
+			      TWL_COMMON_REGULATOR_VPLL2);
+	igep_twldata.vpll2->constraints.apply_uV = true;
+	igep_twldata.vpll2->constraints.name = "VDVI";
 
 	if (machine_is_igep0020()) {
 		/*
@@ -554,10 +524,7 @@ static void __init igep_i2c_init(void)
 
 		igep_twldata.keypad	= &igep2_keypad_pdata;
 		/* Get common pmic data */
-		omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO,
-				      TWL_COMMON_REGULATOR_VPLL2);
-		igep_twldata.vpll2->constraints.apply_uV = true;
-		igep_twldata.vpll2->constraints.name = "VDVI";
+		omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, 0);
 	}
 
 	omap3_pmic_init("twl4030", &igep_twldata);
@@ -668,7 +635,6 @@ static void __init igep_init(void)
 
 	if (machine_is_igep0020()) {
 		omap_display_init(&igep2_dss_data);
-		igep2_display_init();
 		igep2_init_smsc911x();
 		usbhs_init(&igep2_usbhs_bdata);
 	} else {
@@ -684,6 +650,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= igep_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
@@ -696,6 +663,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= igep_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
-- 
cgit