From 6792a3f47a2e42d7164292bf7f1a55cfc4c91652 Mon Sep 17 00:00:00 2001 From: Anton Arapov Date: Fri, 8 Jun 2012 12:58:00 +0200 Subject: fedora kernel: b920e9b748c595f970bf80ede7832d39f8d567da Signed-off-by: Anton Arapov --- Documentation/networking/e100.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation/networking/e100.txt') diff --git a/Documentation/networking/e100.txt b/Documentation/networking/e100.txt index 162f323a7a1..fcb6c71cdb6 100644 --- a/Documentation/networking/e100.txt +++ b/Documentation/networking/e100.txt @@ -94,8 +94,8 @@ Additional Configurations Configuring a network driver to load properly when the system is started is distribution dependent. Typically, the configuration process involves adding - an alias line to /etc/modules.conf or /etc/modprobe.conf as well as editing - other system startup scripts and/or configuration files. Many popular Linux + an alias line to /etc/modprobe.d/*.conf as well as editing other system + startup scripts and/or configuration files. Many popular Linux distributions ship with tools to make these changes for you. To learn the proper way to configure a network device for your system, refer to your distribution documentation. If during this process you are asked for the @@ -103,7 +103,7 @@ Additional Configurations PRO/100 Family of Adapters is e100. As an example, if you install the e100 driver for two PRO/100 adapters - (eth0 and eth1), add the following to modules.conf or modprobe.conf: + (eth0 and eth1), add the following to a configuraton file in /etc/modprobe.d/ alias eth0 e100 alias eth1 e100 -- cgit