summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/apic/numaq_32.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/apic/numaq_32.c')
-rw-r--r--arch/x86/kernel/apic/numaq_32.c541
1 files changed, 541 insertions, 0 deletions
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
new file mode 100644
index 00000000000..c4a61ca1349
--- /dev/null
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -0,0 +1,541 @@
+/*
+ * Written by: Patricia Gaughen, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gone@us.ibm.com>
+ */
+#include <linux/nodemask.h>
+#include <linux/topology.h>
+#include <linux/bootmem.h>
+#include <linux/memblock.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/kernel.h>
+#include <linux/mmzone.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/numa.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+
+#include <asm/processor.h>
+#include <asm/fixmap.h>
+#include <asm/mpspec.h>
+#include <asm/numaq.h>
+#include <asm/setup.h>
+#include <asm/apic.h>
+#include <asm/e820.h>
+#include <asm/ipi.h>
+
+int found_numaq;
+
+/*
+ * Have to match translation table entries to main table entries by counter
+ * hence the mpc_record variable .... can't see a less disgusting way of
+ * doing this ....
+ */
+struct mpc_trans {
+ unsigned char mpc_type;
+ unsigned char trans_len;
+ unsigned char trans_type;
+ unsigned char trans_quad;
+ unsigned char trans_global;
+ unsigned char trans_local;
+ unsigned short trans_reserved;
+};
+
+static int mpc_record;
+
+static struct mpc_trans *translation_table[MAX_MPC_ENTRY];
+
+int mp_bus_id_to_node[MAX_MP_BUSSES];
+int mp_bus_id_to_local[MAX_MP_BUSSES];
+int quad_local_to_mp_bus_id[NR_CPUS/4][4];
+
+
+static inline void numaq_register_node(int node, struct sys_cfg_data *scd)
+{
+ struct eachquadmem *eq = scd->eq + node;
+ u64 start = (u64)(eq->hi_shrd_mem_start - eq->priv_mem_size) << 20;
+ u64 end = (u64)(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size) << 20;
+ int ret;
+
+ node_set(node, numa_nodes_parsed);
+ ret = numa_add_memblk(node, start, end);
+ BUG_ON(ret < 0);
+}
+
+/*
+ * Function: smp_dump_qct()
+ *
+ * Description: gets memory layout from the quad config table. This
+ * function also updates numa_nodes_parsed with the nodes (quads) present.
+ */
+static void __init smp_dump_qct(void)
+{
+ struct sys_cfg_data *scd;
+ int node;
+
+ scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR);
+
+ for_each_node(node) {
+ if (scd->quads_present31_0 & (1 << node))
+ numaq_register_node(node, scd);
+ }
+}
+
+void __cpuinit numaq_tsc_disable(void)
+{
+ if (!found_numaq)
+ return;
+
+ if (num_online_nodes() > 1) {
+ printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
+ setup_clear_cpu_cap(X86_FEATURE_TSC);
+ }
+}
+
+static void __init numaq_tsc_init(void)
+{
+ numaq_tsc_disable();
+}
+
+static inline int generate_logical_apicid(int quad, int phys_apicid)
+{
+ return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
+}
+
+/* x86_quirks member */
+static int mpc_apic_id(struct mpc_cpu *m)
+{
+ int quad = translation_table[mpc_record]->trans_quad;
+ int logical_apicid = generate_logical_apicid(quad, m->apicid);
+
+ printk(KERN_DEBUG
+ "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
+ m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
+ (m->cpufeature & CPU_MODEL_MASK) >> 4,
+ m->apicver, quad, logical_apicid);
+
+ return logical_apicid;
+}
+
+/* x86_quirks member */
+static void mpc_oem_bus_info(struct mpc_bus *m, char *name)
+{
+ int quad = translation_table[mpc_record]->trans_quad;
+ int local = translation_table[mpc_record]->trans_local;
+
+ mp_bus_id_to_node[m->busid] = quad;
+ mp_bus_id_to_local[m->busid] = local;
+
+ printk(KERN_INFO "Bus #%d is %s (node %d)\n", m->busid, name, quad);
+}
+
+/* x86_quirks member */
+static void mpc_oem_pci_bus(struct mpc_bus *m)
+{
+ int quad = translation_table[mpc_record]->trans_quad;
+ int local = translation_table[mpc_record]->trans_local;
+
+ quad_local_to_mp_bus_id[quad][local] = m->busid;
+}
+
+/*
+ * Called from mpparse code.
+ * mode = 0: prescan
+ * mode = 1: one mpc entry scanned
+ */
+static void numaq_mpc_record(unsigned int mode)
+{
+ if (!mode)
+ mpc_record = 0;
+ else
+ mpc_record++;
+}
+
+static void __init MP_translation_info(struct mpc_trans *m)
+{
+ printk(KERN_INFO
+ "Translation: record %d, type %d, quad %d, global %d, local %d\n",
+ mpc_record, m->trans_type, m->trans_quad, m->trans_global,
+ m->trans_local);
+
+ if (mpc_record >= MAX_MPC_ENTRY)
+ printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
+ else
+ translation_table[mpc_record] = m; /* stash this for later */
+
+ if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
+ node_set_online(m->trans_quad);
+}
+
+static int __init mpf_checksum(unsigned char *mp, int len)
+{
+ int sum = 0;
+
+ while (len--)
+ sum += *mp++;
+
+ return sum & 0xFF;
+}
+
+/*
+ * Read/parse the MPC oem tables
+ */
+static void __init smp_read_mpc_oem(struct mpc_table *mpc)
+{
+ struct mpc_oemtable *oemtable = (void *)(long)mpc->oemptr;
+ int count = sizeof(*oemtable); /* the header size */
+ unsigned char *oemptr = ((unsigned char *)oemtable) + count;
+
+ mpc_record = 0;
+ printk(KERN_INFO
+ "Found an OEM MPC table at %8p - parsing it...\n", oemtable);
+
+ if (memcmp(oemtable->signature, MPC_OEM_SIGNATURE, 4)) {
+ printk(KERN_WARNING
+ "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
+ oemtable->signature[0], oemtable->signature[1],
+ oemtable->signature[2], oemtable->signature[3]);
+ return;
+ }
+
+ if (mpf_checksum((unsigned char *)oemtable, oemtable->length)) {
+ printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
+ return;
+ }
+
+ while (count < oemtable->length) {
+ switch (*oemptr) {
+ case MP_TRANSLATION:
+ {
+ struct mpc_trans *m = (void *)oemptr;
+
+ MP_translation_info(m);
+ oemptr += sizeof(*m);
+ count += sizeof(*m);
+ ++mpc_record;
+ break;
+ }
+ default:
+ printk(KERN_WARNING
+ "Unrecognised OEM table entry type! - %d\n",
+ (int)*oemptr);
+ return;
+ }
+ }
+}
+
+static __init void early_check_numaq(void)
+{
+ /*
+ * get boot-time SMP configuration:
+ */
+ if (smp_found_config)
+ early_get_smp_config();
+
+ if (found_numaq) {
+ x86_init.mpparse.mpc_record = numaq_mpc_record;
+ x86_init.mpparse.setup_ioapic_ids = x86_init_noop;
+ x86_init.mpparse.mpc_apic_id = mpc_apic_id;
+ x86_init.mpparse.smp_read_mpc_oem = smp_read_mpc_oem;
+ x86_init.mpparse.mpc_oem_pci_bus = mpc_oem_pci_bus;
+ x86_init.mpparse.mpc_oem_bus_info = mpc_oem_bus_info;
+ x86_init.timers.tsc_pre_init = numaq_tsc_init;
+ x86_init.pci.init = pci_numaq_init;
+ }
+}
+
+int __init numaq_numa_init(void)
+{
+ early_check_numaq();
+ if (!found_numaq)
+ return -ENOENT;
+ smp_dump_qct();
+
+ return 0;
+}
+
+#define NUMAQ_APIC_DFR_VALUE (APIC_DFR_CLUSTER)
+
+static inline unsigned int numaq_get_apic_id(unsigned long x)
+{
+ return (x >> 24) & 0x0F;
+}
+
+static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+ default_send_IPI_mask_sequence_logical(mask, vector);
+}
+
+static inline void numaq_send_IPI_allbutself(int vector)
+{
+ default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector);
+}
+
+static inline void numaq_send_IPI_all(int vector)
+{
+ numaq_send_IPI_mask(cpu_online_mask, vector);
+}
+
+#define NUMAQ_TRAMPOLINE_PHYS_LOW (0x8)
+#define NUMAQ_TRAMPOLINE_PHYS_HIGH (0xa)
+
+/*
+ * Because we use NMIs rather than the INIT-STARTUP sequence to
+ * bootstrap the CPUs, the APIC may be in a weird state. Kick it:
+ */
+static inline void numaq_smp_callin_clear_local_apic(void)
+{
+ clear_local_APIC();
+}
+
+static inline const struct cpumask *numaq_target_cpus(void)
+{
+ return cpu_all_mask;
+}
+
+static unsigned long numaq_check_apicid_used(physid_mask_t *map, int apicid)
+{
+ return physid_isset(apicid, *map);
+}
+
+static inline unsigned long numaq_check_apicid_present(int bit)
+{
+ return physid_isset(bit, phys_cpu_present_map);
+}
+
+static inline int numaq_apic_id_registered(void)
+{
+ return 1;
+}
+
+static inline void numaq_init_apic_ldr(void)
+{
+ /* Already done in NUMA-Q firmware */
+}
+
+static inline void numaq_setup_apic_routing(void)
+{
+ printk(KERN_INFO
+ "Enabling APIC mode: NUMA-Q. Using %d I/O APICs\n",
+ nr_ioapics);
+}
+
+/*
+ * Skip adding the timer int on secondary nodes, which causes
+ * a small but painful rift in the time-space continuum.
+ */
+static inline int numaq_multi_timer_check(int apic, int irq)
+{
+ return apic != 0 && irq == 0;
+}
+
+static inline void numaq_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
+{
+ /* We don't have a good way to do this yet - hack */
+ return physids_promote(0xFUL, retmap);
+}
+
+/*
+ * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
+ * cpu to APIC ID relation to properly interact with the intelligent
+ * mode of the cluster controller.
+ */
+static inline int numaq_cpu_present_to_apicid(int mps_cpu)
+{
+ if (mps_cpu < 60)
+ return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
+ else
+ return BAD_APICID;
+}
+
+static inline int numaq_apicid_to_node(int logical_apicid)
+{
+ return logical_apicid >> 4;
+}
+
+static int numaq_numa_cpu_node(int cpu)
+{
+ int logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
+
+ if (logical_apicid != BAD_APICID)
+ return numaq_apicid_to_node(logical_apicid);
+ return NUMA_NO_NODE;
+}
+
+static void numaq_apicid_to_cpu_present(int logical_apicid, physid_mask_t *retmap)
+{
+ int node = numaq_apicid_to_node(logical_apicid);
+ int cpu = __ffs(logical_apicid & 0xf);
+
+ physid_set_mask_of_physid(cpu + 4*node, retmap);
+}
+
+/* Where the IO area was mapped on multiquad, always 0 otherwise */
+void *xquad_portio;
+
+static inline int numaq_check_phys_apicid_present(int phys_apicid)
+{
+ return 1;
+}
+
+/*
+ * We use physical apicids here, not logical, so just return the default
+ * physical broadcast to stop people from breaking us
+ */
+static unsigned int numaq_cpu_mask_to_apicid(const struct cpumask *cpumask)
+{
+ return 0x0F;
+}
+
+static inline unsigned int
+numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+ const struct cpumask *andmask)
+{
+ return 0x0F;
+}
+
+/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
+static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+ return cpuid_apic >> index_msb;
+}
+
+static int
+numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+{
+ if (strncmp(oem, "IBM NUMA", 8))
+ printk(KERN_ERR "Warning! Not a NUMA-Q system!\n");
+ else
+ found_numaq = 1;
+
+ return found_numaq;
+}
+
+static int probe_numaq(void)
+{
+ /* already know from get_memcfg_numaq() */
+ return found_numaq;
+}
+
+static void numaq_vector_allocation_domain(int cpu, struct cpumask *retmask)
+{
+ /* Careful. Some cpus do not strictly honor the set of cpus
+ * specified in the interrupt destination when using lowest
+ * priority interrupt delivery mode.
+ *
+ * In particular there was a hyperthreading cpu observed to
+ * deliver interrupts to the wrong hyperthread when only one
+ * hyperthread was specified in the interrupt desitination.
+ */
+ cpumask_clear(retmask);
+ cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
+}
+
+static void numaq_setup_portio_remap(void)
+{
+ int num_quads = num_online_nodes();
+
+ if (num_quads <= 1)
+ return;
+
+ printk(KERN_INFO
+ "Remapping cross-quad port I/O for %d quads\n", num_quads);
+
+ xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
+
+ printk(KERN_INFO
+ "xquad_portio vaddr 0x%08lx, len %08lx\n",
+ (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
+}
+
+/* Use __refdata to keep false positive warning calm. */
+static struct apic __refdata apic_numaq = {
+
+ .name = "NUMAQ",
+ .probe = probe_numaq,
+ .acpi_madt_oem_check = NULL,
+ .apic_id_registered = numaq_apic_id_registered,
+
+ .irq_delivery_mode = dest_LowestPrio,
+ /* physical delivery on LOCAL quad: */
+ .irq_dest_mode = 0,
+
+ .target_cpus = numaq_target_cpus,
+ .disable_esr = 1,
+ .dest_logical = APIC_DEST_LOGICAL,
+ .check_apicid_used = numaq_check_apicid_used,
+ .check_apicid_present = numaq_check_apicid_present,
+
+ .vector_allocation_domain = numaq_vector_allocation_domain,
+ .init_apic_ldr = numaq_init_apic_ldr,
+
+ .ioapic_phys_id_map = numaq_ioapic_phys_id_map,
+ .setup_apic_routing = numaq_setup_apic_routing,
+ .multi_timer_check = numaq_multi_timer_check,
+ .cpu_present_to_apicid = numaq_cpu_present_to_apicid,
+ .apicid_to_cpu_present = numaq_apicid_to_cpu_present,
+ .setup_portio_remap = numaq_setup_portio_remap,
+ .check_phys_apicid_present = numaq_check_phys_apicid_present,
+ .enable_apic_mode = NULL,
+ .phys_pkg_id = numaq_phys_pkg_id,
+ .mps_oem_check = numaq_mps_oem_check,
+
+ .get_apic_id = numaq_get_apic_id,
+ .set_apic_id = NULL,
+ .apic_id_mask = 0x0F << 24,
+
+ .cpu_mask_to_apicid = numaq_cpu_mask_to_apicid,
+ .cpu_mask_to_apicid_and = numaq_cpu_mask_to_apicid_and,
+
+ .send_IPI_mask = numaq_send_IPI_mask,
+ .send_IPI_mask_allbutself = NULL,
+ .send_IPI_allbutself = numaq_send_IPI_allbutself,
+ .send_IPI_all = numaq_send_IPI_all,
+ .send_IPI_self = default_send_IPI_self,
+
+ .wakeup_secondary_cpu = wakeup_secondary_cpu_via_nmi,
+ .trampoline_phys_low = NUMAQ_TRAMPOLINE_PHYS_LOW,
+ .trampoline_phys_high = NUMAQ_TRAMPOLINE_PHYS_HIGH,
+
+ /* We don't do anything here because we use NMI's to boot instead */
+ .wait_for_init_deassert = NULL,
+
+ .smp_callin_clear_local_apic = numaq_smp_callin_clear_local_apic,
+ .inquire_remote_apic = NULL,
+
+ .read = native_apic_mem_read,
+ .write = native_apic_mem_write,
+ .icr_read = native_apic_icr_read,
+ .icr_write = native_apic_icr_write,
+ .wait_icr_idle = native_apic_wait_icr_idle,
+ .safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
+
+ .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid,
+ .x86_32_numa_cpu_node = numaq_numa_cpu_node,
+};
+
+apic_driver(apic_numaq);