summaryrefslogtreecommitdiffstats
path: root/arch/tile/include/asm/pci.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/tile/include/asm/pci.h')
-rw-r--r--arch/tile/include/asm/pci.h151
1 files changed, 138 insertions, 13 deletions
diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h
index 32e6cbe..302cdf7 100644
--- a/arch/tile/include/asm/pci.h
+++ b/arch/tile/include/asm/pci.h
@@ -15,9 +15,13 @@
#ifndef _ASM_TILE_PCI_H
#define _ASM_TILE_PCI_H
+#include <linux/dma-mapping.h>
#include <linux/pci.h>
+#include <linux/numa.h>
#include <asm-generic/pci_iomap.h>
+#ifndef __tilegx__
+
/*
* Structure of a PCI controller (host bridge)
*/
@@ -41,21 +45,151 @@ struct pci_controller {
};
/*
+ * This flag tells if the platform is TILEmpower that needs
+ * special configuration for the PLX switch chip.
+ */
+extern int tile_plx_gen1;
+
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
+
+#define TILE_NUM_PCIE 2
+
+/*
* The hypervisor maps the entirety of CPA-space as bus addresses, so
* bus addresses are physical addresses. The networking and block
* device layers use this boolean for bounce buffer decisions.
*/
#define PCI_DMA_BUS_IS_PHYS 1
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+#else
+
+#include <asm/page.h>
+#include <gxio/trio.h>
+
+/**
+ * We reserve the hugepage-size address range at the top of the 64-bit address
+ * space to serve as the PCI window, emulating the BAR0 space of an endpoint
+ * device. This window is used by the chip-to-chip applications running on
+ * the RC node. The reason for carving out this window is that Mem-Maps that
+ * back up this window will not overlap with those that map the real physical
+ * memory.
+ */
+#define PCIE_HOST_BAR0_SIZE HPAGE_SIZE
+#define PCIE_HOST_BAR0_START HPAGE_MASK
+
+/**
+ * The first PAGE_SIZE of the above "BAR" window is mapped to the
+ * gxpci_host_regs structure.
+ */
+#define PCIE_HOST_REGS_SIZE PAGE_SIZE
+
+/*
+ * This is the PCI address where the Mem-Map interrupt regions start.
+ * We use the 2nd to the last huge page of the 64-bit address space.
+ * The last huge page is used for the rootcomplex "bar", for C2C purpose.
+ */
+#define MEM_MAP_INTR_REGIONS_BASE (HPAGE_MASK - HPAGE_SIZE)
+
+/*
+ * Each Mem-Map interrupt region occupies 4KB.
+ */
+#define MEM_MAP_INTR_REGION_SIZE (1 << TRIO_MAP_MEM_LIM__ADDR_SHIFT)
+
+/*
+ * Allocate the PCI BAR window right below 4GB.
+ */
+#define TILE_PCI_BAR_WINDOW_TOP (1ULL << 32)
+
+/*
+ * Allocate 1GB for the PCI BAR window.
+ */
+#define TILE_PCI_BAR_WINDOW_SIZE (1 << 30)
+
+/*
+ * This is the highest bus address targeting the host memory that
+ * can be generated by legacy PCI devices with 32-bit or less
+ * DMA capability, dictated by the BAR window size and location.
+ */
+#define TILE_PCI_MAX_DIRECT_DMA_ADDRESS \
+ (TILE_PCI_BAR_WINDOW_TOP - TILE_PCI_BAR_WINDOW_SIZE - 1)
+
+/*
+ * We shift the PCI bus range for all the physical memory up by the whole PA
+ * range. The corresponding CPA of an incoming PCI request will be the PCI
+ * address minus TILE_PCI_MEM_MAP_BASE_OFFSET. This also implies
+ * that the 64-bit capable devices will be given DMA addresses as
+ * the CPA plus TILE_PCI_MEM_MAP_BASE_OFFSET. To support 32-bit
+ * devices, we create a separate map region that handles the low
+ * 4GB.
+ */
+#define TILE_PCI_MEM_MAP_BASE_OFFSET (1ULL << CHIP_PA_WIDTH())
+
+/*
+ * Start of the PCI memory resource, which starts at the end of the
+ * maximum system physical RAM address.
+ */
+#define TILE_PCI_MEM_START (1ULL << CHIP_PA_WIDTH())
+
+/*
+ * Structure of a PCI controller (host bridge) on Gx.
+ */
+struct pci_controller {
+
+ /* Pointer back to the TRIO that this PCIe port is connected to. */
+ gxio_trio_context_t *trio;
+ int mac; /* PCIe mac index on the TRIO shim */
+ int trio_index; /* Index of TRIO shim that contains the MAC. */
+
+ int pio_mem_index; /* PIO region index for memory access */
+
+ /*
+ * Mem-Map regions for all the memory controllers so that Linux can
+ * map all of its physical memory space to the PCI bus.
+ */
+ int mem_maps[MAX_NUMNODES];
+
+ int index; /* PCI domain number */
+ struct pci_bus *root_bus;
+
+ /* PCI memory space resource for this controller. */
+ struct resource mem_space;
+ char mem_space_name[32];
+
+ uint64_t mem_offset; /* cpu->bus memory mapping offset. */
+
+ int first_busno;
+
+ struct pci_ops *ops;
+
+ /* Table that maps the INTx numbers to Linux irq numbers. */
+ int irq_intx_table[4];
+
+ /* Address ranges that are routed to this controller/bridge. */
+ struct resource mem_resources[3];
+};
+
+extern struct pci_controller pci_controllers[TILEGX_NUM_TRIO * TILEGX_TRIO_PCIES];
+extern gxio_trio_context_t trio_contexts[TILEGX_NUM_TRIO];
+
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+
+/*
+ * The PCI address space does not equal the physical memory address
+ * space (we have an IOMMU). The IDE and SCSI device layers use this
+ * boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS 0
+
+#endif /* __tilegx__ */
+
int __init tile_pci_init(void);
int __init pcibios_init(void);
-static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
-
void __devinit pcibios_fixup_bus(struct pci_bus *bus);
-#define TILE_NUM_PCIE 2
-
#define pci_domain_nr(bus) (((struct pci_controller *)(bus)->sysdata)->index)
/*
@@ -79,19 +213,10 @@ static inline int pcibios_assign_all_busses(void)
#define PCIBIOS_MIN_MEM 0
#define PCIBIOS_MIN_IO 0
-/*
- * This flag tells if the platform is TILEmpower that needs
- * special configuration for the PLX switch chip.
- */
-extern int tile_plx_gen1;
-
/* Use any cpu for PCI. */
#define cpumask_of_pcibus(bus) cpu_online_mask
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
-/* generic pci stuff */
-#include <asm-generic/pci.h>
-
#endif /* _ASM_TILE_PCI_H */